diff --git a/nanomsg/bin/libnanomsg.dll b/nanomsg/bin/libnanomsg.dll new file mode 100755 index 000000000..4a7fe2768 Binary files /dev/null and b/nanomsg/bin/libnanomsg.dll differ diff --git a/nanomsg/bin/nanocat.exe b/nanomsg/bin/nanocat.exe new file mode 100755 index 000000000..b34b8984e Binary files /dev/null and b/nanomsg/bin/nanocat.exe differ diff --git a/nanomsg/include/nanomsg/bus.h b/nanomsg/include/nanomsg/bus.h new file mode 100644 index 000000000..7572903ed --- /dev/null +++ b/nanomsg/include/nanomsg/bus.h @@ -0,0 +1,39 @@ +/* + Copyright (c) 2013 Martin Sustrik All rights reserved. + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom + the Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + IN THE SOFTWARE. +*/ + +#ifndef BUS_H_INCLUDED +#define BUS_H_INCLUDED + +#ifdef __cplusplus +extern "C" { +#endif + +#define NN_PROTO_BUS 7 + +#define NN_BUS (NN_PROTO_BUS * 16 + 0) + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/nanomsg/include/nanomsg/inproc.h b/nanomsg/include/nanomsg/inproc.h new file mode 100644 index 000000000..ed3879908 --- /dev/null +++ b/nanomsg/include/nanomsg/inproc.h @@ -0,0 +1,37 @@ +/* + Copyright (c) 2012 Martin Sustrik All rights reserved. + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom + the Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + IN THE SOFTWARE. +*/ + +#ifndef INPROC_H_INCLUDED +#define INPROC_H_INCLUDED + +#ifdef __cplusplus +extern "C" { +#endif + +#define NN_INPROC -1 + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/nanomsg/include/nanomsg/ipc.h b/nanomsg/include/nanomsg/ipc.h new file mode 100644 index 000000000..a78bfb833 --- /dev/null +++ b/nanomsg/include/nanomsg/ipc.h @@ -0,0 +1,42 @@ +/* + Copyright (c) 2012 Martin Sustrik All rights reserved. + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom + the Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + IN THE SOFTWARE. +*/ + +#ifndef IPC_H_INCLUDED +#define IPC_H_INCLUDED + +#ifdef __cplusplus +extern "C" { +#endif + +#define NN_IPC -2 + +/* The object set here must be valid as long as you are using the socket */ +#define NN_IPC_SEC_ATTR 1 +#define NN_IPC_OUTBUFSZ 2 +#define NN_IPC_INBUFSZ 3 + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/nanomsg/include/nanomsg/nn.h b/nanomsg/include/nanomsg/nn.h new file mode 100644 index 000000000..ce5efe33b --- /dev/null +++ b/nanomsg/include/nanomsg/nn.h @@ -0,0 +1,412 @@ +/* + Copyright (c) 2012-2014 Martin Sustrik All rights reserved. + Copyright (c) 2013 GoPivotal, Inc. All rights reserved. + Copyright 2016 Garrett D'Amore + Copyright (c) 2015-2016 Jack R. Dunaway. All rights reserved. + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom + the Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + IN THE SOFTWARE. +*/ + +#ifndef NN_H_INCLUDED +#define NN_H_INCLUDED + +#ifdef __cplusplus +extern "C" { +#endif + +#include +#include +#include + +/* Handle DSO symbol visibility. */ +#if !defined(NN_EXPORT) +# if defined(_WIN32) && !defined(NN_STATIC_LIB) +# if defined NN_SHARED_LIB +# define NN_EXPORT __declspec(dllexport) +# else +# define NN_EXPORT __declspec(dllimport) +# endif +# else +# define NN_EXPORT extern +# endif +#endif + +/******************************************************************************/ +/* ABI versioning support. */ +/******************************************************************************/ + +/* Don't change this unless you know exactly what you're doing and have */ +/* read and understand the following documents: */ +/* www.gnu.org/software/libtool/manual/html_node/Libtool-versioning.html */ +/* www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html */ + +/* The current interface version. */ +#define NN_VERSION_CURRENT 5 + +/* The latest revision of the current interface. */ +#define NN_VERSION_REVISION 0 + +/* How many past interface versions are still supported. */ +#define NN_VERSION_AGE 0 + +/******************************************************************************/ +/* Errors. */ +/******************************************************************************/ + +/* A number random enough not to collide with different errno ranges on */ +/* different OSes. The assumption is that error_t is at least 32-bit type. */ +#define NN_HAUSNUMERO 156384712 + +/* On some platforms some standard POSIX errnos are not defined. */ +#ifndef ENOTSUP +#define ENOTSUP (NN_HAUSNUMERO + 1) +#endif +#ifndef EPROTONOSUPPORT +#define EPROTONOSUPPORT (NN_HAUSNUMERO + 2) +#endif +#ifndef ENOBUFS +#define ENOBUFS (NN_HAUSNUMERO + 3) +#endif +#ifndef ENETDOWN +#define ENETDOWN (NN_HAUSNUMERO + 4) +#endif +#ifndef EADDRINUSE +#define EADDRINUSE (NN_HAUSNUMERO + 5) +#endif +#ifndef EADDRNOTAVAIL +#define EADDRNOTAVAIL (NN_HAUSNUMERO + 6) +#endif +#ifndef ECONNREFUSED +#define ECONNREFUSED (NN_HAUSNUMERO + 7) +#endif +#ifndef EINPROGRESS +#define EINPROGRESS (NN_HAUSNUMERO + 8) +#endif +#ifndef ENOTSOCK +#define ENOTSOCK (NN_HAUSNUMERO + 9) +#endif +#ifndef EAFNOSUPPORT +#define EAFNOSUPPORT (NN_HAUSNUMERO + 10) +#endif +#ifndef EPROTO +#define EPROTO (NN_HAUSNUMERO + 11) +#endif +#ifndef EAGAIN +#define EAGAIN (NN_HAUSNUMERO + 12) +#endif +#ifndef EBADF +#define EBADF (NN_HAUSNUMERO + 13) +#endif +#ifndef EINVAL +#define EINVAL (NN_HAUSNUMERO + 14) +#endif +#ifndef EMFILE +#define EMFILE (NN_HAUSNUMERO + 15) +#endif +#ifndef EFAULT +#define EFAULT (NN_HAUSNUMERO + 16) +#endif +#ifndef EACCES +#define EACCES (NN_HAUSNUMERO + 17) +#endif +#ifndef EACCESS +#define EACCESS (EACCES) +#endif +#ifndef ENETRESET +#define ENETRESET (NN_HAUSNUMERO + 18) +#endif +#ifndef ENETUNREACH +#define ENETUNREACH (NN_HAUSNUMERO + 19) +#endif +#ifndef EHOSTUNREACH +#define EHOSTUNREACH (NN_HAUSNUMERO + 20) +#endif +#ifndef ENOTCONN +#define ENOTCONN (NN_HAUSNUMERO + 21) +#endif +#ifndef EMSGSIZE +#define EMSGSIZE (NN_HAUSNUMERO + 22) +#endif +#ifndef ETIMEDOUT +#define ETIMEDOUT (NN_HAUSNUMERO + 23) +#endif +#ifndef ECONNABORTED +#define ECONNABORTED (NN_HAUSNUMERO + 24) +#endif +#ifndef ECONNRESET +#define ECONNRESET (NN_HAUSNUMERO + 25) +#endif +#ifndef ENOPROTOOPT +#define ENOPROTOOPT (NN_HAUSNUMERO + 26) +#endif +#ifndef EISCONN +#define EISCONN (NN_HAUSNUMERO + 27) +#define NN_EISCONN_DEFINED +#endif +#ifndef ESOCKTNOSUPPORT +#define ESOCKTNOSUPPORT (NN_HAUSNUMERO + 28) +#endif + +/* Native nanomsg error codes. */ +#ifndef ETERM +#define ETERM (NN_HAUSNUMERO + 53) +#endif +#ifndef EFSM +#define EFSM (NN_HAUSNUMERO + 54) +#endif + +/* This function retrieves the errno as it is known to the library. */ +/* The goal of this function is to make the code 100% portable, including */ +/* where the library is compiled with certain CRT library (on Windows) and */ +/* linked to an application that uses different CRT library. */ +NN_EXPORT int nn_errno (void); + +/* Resolves system errors and native errors to human-readable string. */ +NN_EXPORT const char *nn_strerror (int errnum); + + +/* Returns the symbol name (e.g. "NN_REQ") and value at a specified index. */ +/* If the index is out-of-range, returns NULL and sets errno to EINVAL */ +/* General usage is to start at i=0 and iterate until NULL is returned. */ +NN_EXPORT const char *nn_symbol (int i, int *value); + +/* Constants that are returned in `ns` member of nn_symbol_properties */ +#define NN_NS_NAMESPACE 0 +#define NN_NS_VERSION 1 +#define NN_NS_DOMAIN 2 +#define NN_NS_TRANSPORT 3 +#define NN_NS_PROTOCOL 4 +#define NN_NS_OPTION_LEVEL 5 +#define NN_NS_SOCKET_OPTION 6 +#define NN_NS_TRANSPORT_OPTION 7 +#define NN_NS_OPTION_TYPE 8 +#define NN_NS_OPTION_UNIT 9 +#define NN_NS_FLAG 10 +#define NN_NS_ERROR 11 +#define NN_NS_LIMIT 12 +#define NN_NS_EVENT 13 +#define NN_NS_STATISTIC 14 + +/* Constants that are returned in `type` member of nn_symbol_properties */ +#define NN_TYPE_NONE 0 +#define NN_TYPE_INT 1 +#define NN_TYPE_STR 2 + +/* Constants that are returned in the `unit` member of nn_symbol_properties */ +#define NN_UNIT_NONE 0 +#define NN_UNIT_BYTES 1 +#define NN_UNIT_MILLISECONDS 2 +#define NN_UNIT_PRIORITY 3 +#define NN_UNIT_BOOLEAN 4 +#define NN_UNIT_MESSAGES 5 +#define NN_UNIT_COUNTER 6 + +/* Structure that is returned from nn_symbol */ +struct nn_symbol_properties { + + /* The constant value */ + int value; + + /* The constant name */ + const char* name; + + /* The constant namespace, or zero for namespaces themselves */ + int ns; + + /* The option type for socket option constants */ + int type; + + /* The unit for the option value for socket option constants */ + int unit; +}; + +/* Fills in nn_symbol_properties structure and returns it's length */ +/* If the index is out-of-range, returns 0 */ +/* General usage is to start at i=0 and iterate until zero is returned. */ +NN_EXPORT int nn_symbol_info (int i, + struct nn_symbol_properties *buf, int buflen); + +/******************************************************************************/ +/* Helper function for shutting down multi-threaded applications. */ +/******************************************************************************/ + +NN_EXPORT void nn_term (void); + +/******************************************************************************/ +/* Zero-copy support. */ +/******************************************************************************/ + +#define NN_MSG ((size_t) -1) + +NN_EXPORT void *nn_allocmsg (size_t size, int type); +NN_EXPORT void *nn_reallocmsg (void *msg, size_t size); +NN_EXPORT int nn_freemsg (void *msg); + +/******************************************************************************/ +/* Socket definition. */ +/******************************************************************************/ + +struct nn_iovec { + void *iov_base; + size_t iov_len; +}; + +struct nn_msghdr { + struct nn_iovec *msg_iov; + int msg_iovlen; + void *msg_control; + size_t msg_controllen; +}; + +struct nn_cmsghdr { + size_t cmsg_len; + int cmsg_level; + int cmsg_type; +}; + +/* Internal stuff. Not to be used directly. */ +NN_EXPORT struct nn_cmsghdr *nn_cmsg_nxthdr_ ( + const struct nn_msghdr *mhdr, + const struct nn_cmsghdr *cmsg); +#define NN_CMSG_ALIGN_(len) \ + (((len) + sizeof (size_t) - 1) & (size_t) ~(sizeof (size_t) - 1)) + +/* POSIX-defined msghdr manipulation. */ + +#define NN_CMSG_FIRSTHDR(mhdr) \ + nn_cmsg_nxthdr_ ((struct nn_msghdr*) (mhdr), NULL) + +#define NN_CMSG_NXTHDR(mhdr, cmsg) \ + nn_cmsg_nxthdr_ ((struct nn_msghdr*) (mhdr), (struct nn_cmsghdr*) (cmsg)) + +#define NN_CMSG_DATA(cmsg) \ + ((unsigned char*) (((struct nn_cmsghdr*) (cmsg)) + 1)) + +/* Extensions to POSIX defined by RFC 3542. */ + +#define NN_CMSG_SPACE(len) \ + (NN_CMSG_ALIGN_ (len) + NN_CMSG_ALIGN_ (sizeof (struct nn_cmsghdr))) + +#define NN_CMSG_LEN(len) \ + (NN_CMSG_ALIGN_ (sizeof (struct nn_cmsghdr)) + (len)) + +/* SP address families. */ +#define AF_SP 1 +#define AF_SP_RAW 2 + +/* Max size of an SP address. */ +#define NN_SOCKADDR_MAX 128 + +/* Socket option levels: Negative numbers are reserved for transports, + positive for socket types. */ +#define NN_SOL_SOCKET 0 + +/* Generic socket options (NN_SOL_SOCKET level). */ +#define NN_LINGER 1 +#define NN_SNDBUF 2 +#define NN_RCVBUF 3 +#define NN_SNDTIMEO 4 +#define NN_RCVTIMEO 5 +#define NN_RECONNECT_IVL 6 +#define NN_RECONNECT_IVL_MAX 7 +#define NN_SNDPRIO 8 +#define NN_RCVPRIO 9 +#define NN_SNDFD 10 +#define NN_RCVFD 11 +#define NN_DOMAIN 12 +#define NN_PROTOCOL 13 +#define NN_IPV4ONLY 14 +#define NN_SOCKET_NAME 15 +#define NN_RCVMAXSIZE 16 +#define NN_MAXTTL 17 + +/* Send/recv options. */ +#define NN_DONTWAIT 1 + +/* Ancillary data. */ +#define PROTO_SP 1 +#define SP_HDR 1 + +NN_EXPORT int nn_socket (int domain, int protocol); +NN_EXPORT int nn_close (int s); +NN_EXPORT int nn_setsockopt (int s, int level, int option, const void *optval, + size_t optvallen); +NN_EXPORT int nn_getsockopt (int s, int level, int option, void *optval, + size_t *optvallen); +NN_EXPORT int nn_bind (int s, const char *addr); +NN_EXPORT int nn_connect (int s, const char *addr); +NN_EXPORT int nn_shutdown (int s, int how); +NN_EXPORT int nn_send (int s, const void *buf, size_t len, int flags); +NN_EXPORT int nn_recv (int s, void *buf, size_t len, int flags); +NN_EXPORT int nn_sendmsg (int s, const struct nn_msghdr *msghdr, int flags); +NN_EXPORT int nn_recvmsg (int s, struct nn_msghdr *msghdr, int flags); + +/******************************************************************************/ +/* Socket mutliplexing support. */ +/******************************************************************************/ + +#define NN_POLLIN 1 +#define NN_POLLOUT 2 + +struct nn_pollfd { + int fd; + short events; + short revents; +}; + +NN_EXPORT int nn_poll (struct nn_pollfd *fds, int nfds, int timeout); + +/******************************************************************************/ +/* Built-in support for devices. */ +/******************************************************************************/ + +NN_EXPORT int nn_device (int s1, int s2); + +/******************************************************************************/ +/* Statistics. */ +/******************************************************************************/ + +/* Transport statistics */ +#define NN_STAT_ESTABLISHED_CONNECTIONS 101 +#define NN_STAT_ACCEPTED_CONNECTIONS 102 +#define NN_STAT_DROPPED_CONNECTIONS 103 +#define NN_STAT_BROKEN_CONNECTIONS 104 +#define NN_STAT_CONNECT_ERRORS 105 +#define NN_STAT_BIND_ERRORS 106 +#define NN_STAT_ACCEPT_ERRORS 107 + +#define NN_STAT_CURRENT_CONNECTIONS 201 +#define NN_STAT_INPROGRESS_CONNECTIONS 202 +#define NN_STAT_CURRENT_EP_ERRORS 203 + +/* The socket-internal statistics */ +#define NN_STAT_MESSAGES_SENT 301 +#define NN_STAT_MESSAGES_RECEIVED 302 +#define NN_STAT_BYTES_SENT 303 +#define NN_STAT_BYTES_RECEIVED 304 +/* Protocol statistics */ +#define NN_STAT_CURRENT_SND_PRIORITY 401 + +NN_EXPORT uint64_t nn_get_statistic (int s, int stat); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/nanomsg/include/nanomsg/pair.h b/nanomsg/include/nanomsg/pair.h new file mode 100644 index 000000000..3409418f2 --- /dev/null +++ b/nanomsg/include/nanomsg/pair.h @@ -0,0 +1,39 @@ +/* + Copyright (c) 2012 Martin Sustrik All rights reserved. + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom + the Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + IN THE SOFTWARE. +*/ + +#ifndef PAIR_H_INCLUDED +#define PAIR_H_INCLUDED + +#ifdef __cplusplus +extern "C" { +#endif + +#define NN_PROTO_PAIR 1 + +#define NN_PAIR (NN_PROTO_PAIR * 16 + 0) + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/nanomsg/include/nanomsg/pipeline.h b/nanomsg/include/nanomsg/pipeline.h new file mode 100644 index 000000000..db9b7d729 --- /dev/null +++ b/nanomsg/include/nanomsg/pipeline.h @@ -0,0 +1,41 @@ +/* + Copyright (c) 2012 Martin Sustrik All rights reserved. + Copyright (c) 2013 GoPivotal, Inc. All rights reserved. + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom + the Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + IN THE SOFTWARE. +*/ + +#ifndef PIPELINE_H_INCLUDED +#define PIPELINE_H_INCLUDED + +#ifdef __cplusplus +extern "C" { +#endif + +#define NN_PROTO_PIPELINE 5 + +#define NN_PUSH (NN_PROTO_PIPELINE * 16 + 0) +#define NN_PULL (NN_PROTO_PIPELINE * 16 + 1) + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/nanomsg/include/nanomsg/pubsub.h b/nanomsg/include/nanomsg/pubsub.h new file mode 100644 index 000000000..04abb4f1f --- /dev/null +++ b/nanomsg/include/nanomsg/pubsub.h @@ -0,0 +1,43 @@ +/* + Copyright (c) 2012 Martin Sustrik All rights reserved. + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom + the Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + IN THE SOFTWARE. +*/ + +#ifndef PUBSUB_H_INCLUDED +#define PUBSUB_H_INCLUDED + +#ifdef __cplusplus +extern "C" { +#endif + +#define NN_PROTO_PUBSUB 2 + +#define NN_PUB (NN_PROTO_PUBSUB * 16 + 0) +#define NN_SUB (NN_PROTO_PUBSUB * 16 + 1) + +#define NN_SUB_SUBSCRIBE 1 +#define NN_SUB_UNSUBSCRIBE 2 + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/nanomsg/include/nanomsg/reqrep.h b/nanomsg/include/nanomsg/reqrep.h new file mode 100644 index 000000000..fea7a7eb2 --- /dev/null +++ b/nanomsg/include/nanomsg/reqrep.h @@ -0,0 +1,50 @@ +/* + Copyright (c) 2012 Martin Sustrik All rights reserved. + Copyright 2016 Garrett D'Amore + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom + the Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + IN THE SOFTWARE. +*/ + +#ifndef REQREP_H_INCLUDED +#define REQREP_H_INCLUDED + +#include "nn.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define NN_PROTO_REQREP 3 + +#define NN_REQ (NN_PROTO_REQREP * 16 + 0) +#define NN_REP (NN_PROTO_REQREP * 16 + 1) + +#define NN_REQ_RESEND_IVL 1 + +typedef union nn_req_handle { + int i; + void *ptr; +} nn_req_handle; + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/nanomsg/include/nanomsg/survey.h b/nanomsg/include/nanomsg/survey.h new file mode 100644 index 000000000..ad594aa66 --- /dev/null +++ b/nanomsg/include/nanomsg/survey.h @@ -0,0 +1,46 @@ +/* + Copyright (c) 2012 Martin Sustrik All rights reserved. + Copyright 2015 Garrett D'Amore + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom + the Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + IN THE SOFTWARE. +*/ + +#ifndef SURVEY_H_INCLUDED +#define SURVEY_H_INCLUDED + +#ifdef __cplusplus +extern "C" { +#endif + +#define NN_PROTO_SURVEY 6 + +/* NB: Version 0 used 16 + 0/1. That version lacked backtraces, and so + is wire-incompatible with this version. */ + +#define NN_SURVEYOR (NN_PROTO_SURVEY * 16 + 2) +#define NN_RESPONDENT (NN_PROTO_SURVEY * 16 + 3) + +#define NN_SURVEYOR_DEADLINE 1 + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/nanomsg/include/nanomsg/tcp.h b/nanomsg/include/nanomsg/tcp.h new file mode 100644 index 000000000..1d9077655 --- /dev/null +++ b/nanomsg/include/nanomsg/tcp.h @@ -0,0 +1,39 @@ +/* + Copyright (c) 2012 Martin Sustrik All rights reserved. + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom + the Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + IN THE SOFTWARE. +*/ + +#ifndef TCP_H_INCLUDED +#define TCP_H_INCLUDED + +#ifdef __cplusplus +extern "C" { +#endif + +#define NN_TCP -3 + +#define NN_TCP_NODELAY 1 + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/nanomsg/include/nanomsg/ws.h b/nanomsg/include/nanomsg/ws.h new file mode 100644 index 000000000..b7f66b4b3 --- /dev/null +++ b/nanomsg/include/nanomsg/ws.h @@ -0,0 +1,49 @@ +/* + Copyright (c) 2012 250bpm s.r.o. All rights reserved. + Copyright (c) 2014 Wirebird Labs LLC. All rights reserved. + Copyright 2015 Garrett D'Amore + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom + the Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + IN THE SOFTWARE. +*/ + +#ifndef WS_H_INCLUDED +#define WS_H_INCLUDED + +#include "nn.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define NN_WS -4 + +/* NN_WS level socket/cmsg options. Note that only NN_WSMG_TYPE_TEXT and + NN_WS_MSG_TYPE_BINARY messages are supported fully by this implementation. + Attempting to set other message types is undefined. */ +#define NN_WS_MSG_TYPE 1 + +/* WebSocket opcode constants as per RFC 6455 5.2 */ +#define NN_WS_MSG_TYPE_TEXT 0x01 +#define NN_WS_MSG_TYPE_BINARY 0x02 + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/nanomsg/lib/libnanomsg.dll b/nanomsg/lib/libnanomsg.dll new file mode 100644 index 000000000..8ffe03686 Binary files /dev/null and b/nanomsg/lib/libnanomsg.dll differ diff --git a/nanomsg/lib/libnanomsg.dll.a b/nanomsg/lib/libnanomsg.dll.a new file mode 100644 index 000000000..8ffe03686 Binary files /dev/null and b/nanomsg/lib/libnanomsg.dll.a differ diff --git a/nanomsg/lib/pkgconfig/nanomsg.pc b/nanomsg/lib/pkgconfig/nanomsg.pc new file mode 100644 index 000000000..57459dd0b --- /dev/null +++ b/nanomsg/lib/pkgconfig/nanomsg.pc @@ -0,0 +1,13 @@ +prefix=/home/ca/Schreibtisch/supernet/iguana/nanomsg +exec_prefix=${prefix} +includedir=${prefix}/include +libdir=${prefix}/lib + +Name: nanomsg +Description: High-Performance Scalability Protocols +URL: http://nanomsg.org/ +Version: 1.0.0 +Requires: +Libs: -L${libdir} -lnanomsg +Libs.private: -lws2_32 -lmswsock -ladvapi32 +Cflags: -I${includedir} diff --git a/win_lib/bin/curl-config b/win_lib/bin/curl-config new file mode 100755 index 000000000..9fbbf0b50 --- /dev/null +++ b/win_lib/bin/curl-config @@ -0,0 +1,178 @@ +#! /bin/sh +#*************************************************************************** +# _ _ ____ _ +# Project ___| | | | _ \| | +# / __| | | | |_) | | +# | (__| |_| | _ <| |___ +# \___|\___/|_| \_\_____| +# +# Copyright (C) 2001 - 2012, Daniel Stenberg, , et al. +# +# This software is licensed as described in the file COPYING, which +# you should have received as part of this distribution. The terms +# are also available at https://curl.haxx.se/docs/copyright.html. +# +# You may opt to use, copy, modify, merge, publish, distribute and/or sell +# copies of the Software, and permit persons to whom the Software is +# furnished to do so, under the terms of the COPYING file. +# +# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY +# KIND, either express or implied. +# +########################################################################### + +prefix=/home/ca/Schreibtisch/supernet/crypto777/curl-7.52.1/win_lib +exec_prefix=${prefix} +includedir=${prefix}/include +cppflag_curl_staticlib=-DCURL_STATICLIB + +usage() +{ + cat <&2 + exit 1 + fi + ;; + + --configure) + echo " '--enable-mingw' '--enable-static' '--disable-shared' '--prefix=/home/ca/Schreibtisch/supernet/crypto777/curl-7.52.1/win_lib' '--host=i686-w64-mingw32' '--with-ssl=openssl_lib/' 'host_alias=i686-w64-mingw32' 'CC=i686-w64-mingw32-gcc'" + ;; + + *) + echo "unknown option: $1" + usage 1 + ;; + esac + shift +done + +exit 0 diff --git a/win_lib/bin/curl.exe b/win_lib/bin/curl.exe new file mode 100755 index 000000000..65de807ec Binary files /dev/null and b/win_lib/bin/curl.exe differ diff --git a/win_lib/bin/libcurl-4.dll b/win_lib/bin/libcurl-4.dll new file mode 100755 index 000000000..6a73485a6 Binary files /dev/null and b/win_lib/bin/libcurl-4.dll differ diff --git a/win_lib/include/curl/curl.h b/win_lib/include/curl/curl.h new file mode 100644 index 000000000..5b4ae469e --- /dev/null +++ b/win_lib/include/curl/curl.h @@ -0,0 +1,2528 @@ +#ifndef __CURL_CURL_H +#define __CURL_CURL_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2016, Daniel Stenberg, , et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +/* + * If you have libcurl problems, all docs and details are found here: + * https://curl.haxx.se/libcurl/ + * + * curl-library mailing list subscription and unsubscription web interface: + * https://cool.haxx.se/mailman/listinfo/curl-library/ + */ + +#ifdef CURL_NO_OLDIES +#define CURL_STRICTER +#endif + +#include "curlver.h" /* libcurl version defines */ +#include "curlbuild.h" /* libcurl build definitions */ +#include "curlrules.h" /* libcurl rules enforcement */ + +/* + * Define WIN32 when build target is Win32 API + */ + +#if (defined(_WIN32) || defined(__WIN32__)) && \ + !defined(WIN32) && !defined(__SYMBIAN32__) +#define WIN32 +#endif + +#include +#include + +#if defined(__FreeBSD__) && (__FreeBSD__ >= 2) +/* Needed for __FreeBSD_version symbol definition */ +#include +#endif + +/* The include stuff here below is mainly for time_t! */ +#include +#include + +#if defined(WIN32) && !defined(_WIN32_WCE) && !defined(__CYGWIN__) +#if !(defined(_WINSOCKAPI_) || defined(_WINSOCK_H) || \ + defined(__LWIP_OPT_H__) || defined(LWIP_HDR_OPT_H)) +/* The check above prevents the winsock2 inclusion if winsock.h already was + included, since they can't co-exist without problems */ +#include +#include +#endif +#endif + +/* HP-UX systems version 9, 10 and 11 lack sys/select.h and so does oldish + libc5-based Linux systems. Only include it on systems that are known to + require it! */ +#if defined(_AIX) || defined(__NOVELL_LIBC__) || defined(__NetBSD__) || \ + defined(__minix) || defined(__SYMBIAN32__) || defined(__INTEGRITY) || \ + defined(ANDROID) || defined(__ANDROID__) || defined(__OpenBSD__) || \ + (defined(__FreeBSD_version) && (__FreeBSD_version < 800000)) +#include +#endif + +#if !defined(WIN32) && !defined(_WIN32_WCE) +#include +#endif + +#if !defined(WIN32) && !defined(__WATCOMC__) && !defined(__VXWORKS__) +#include +#endif + +#ifdef __BEOS__ +#include +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(BUILDING_LIBCURL) || defined(CURL_STRICTER) +typedef struct Curl_easy CURL; +typedef struct Curl_share CURLSH; +#else +typedef void CURL; +typedef void CURLSH; +#endif + +/* + * libcurl external API function linkage decorations. + */ + +#ifdef CURL_STATICLIB +# define CURL_EXTERN +#elif defined(WIN32) || defined(_WIN32) || defined(__SYMBIAN32__) +# if defined(BUILDING_LIBCURL) +# define CURL_EXTERN __declspec(dllexport) +# else +# define CURL_EXTERN __declspec(dllimport) +# endif +#elif defined(BUILDING_LIBCURL) && defined(CURL_HIDDEN_SYMBOLS) +# define CURL_EXTERN CURL_EXTERN_SYMBOL +#else +# define CURL_EXTERN +#endif + +#ifndef curl_socket_typedef +/* socket typedef */ +#if defined(WIN32) && !defined(__LWIP_OPT_H__) && !defined(LWIP_HDR_OPT_H) +typedef SOCKET curl_socket_t; +#define CURL_SOCKET_BAD INVALID_SOCKET +#else +typedef int curl_socket_t; +#define CURL_SOCKET_BAD -1 +#endif +#define curl_socket_typedef +#endif /* curl_socket_typedef */ + +struct curl_httppost { + struct curl_httppost *next; /* next entry in the list */ + char *name; /* pointer to allocated name */ + long namelength; /* length of name length */ + char *contents; /* pointer to allocated data contents */ + long contentslength; /* length of contents field, see also + CURL_HTTPPOST_LARGE */ + char *buffer; /* pointer to allocated buffer contents */ + long bufferlength; /* length of buffer field */ + char *contenttype; /* Content-Type */ + struct curl_slist *contentheader; /* list of extra headers for this form */ + struct curl_httppost *more; /* if one field name has more than one + file, this link should link to following + files */ + long flags; /* as defined below */ + +/* specified content is a file name */ +#define CURL_HTTPPOST_FILENAME (1<<0) +/* specified content is a file name */ +#define CURL_HTTPPOST_READFILE (1<<1) +/* name is only stored pointer do not free in formfree */ +#define CURL_HTTPPOST_PTRNAME (1<<2) +/* contents is only stored pointer do not free in formfree */ +#define CURL_HTTPPOST_PTRCONTENTS (1<<3) +/* upload file from buffer */ +#define CURL_HTTPPOST_BUFFER (1<<4) +/* upload file from pointer contents */ +#define CURL_HTTPPOST_PTRBUFFER (1<<5) +/* upload file contents by using the regular read callback to get the data and + pass the given pointer as custom pointer */ +#define CURL_HTTPPOST_CALLBACK (1<<6) +/* use size in 'contentlen', added in 7.46.0 */ +#define CURL_HTTPPOST_LARGE (1<<7) + + char *showfilename; /* The file name to show. If not set, the + actual file name will be used (if this + is a file part) */ + void *userp; /* custom pointer used for + HTTPPOST_CALLBACK posts */ + curl_off_t contentlen; /* alternative length of contents + field. Used if CURL_HTTPPOST_LARGE is + set. Added in 7.46.0 */ +}; + +/* This is the CURLOPT_PROGRESSFUNCTION callback proto. It is now considered + deprecated but was the only choice up until 7.31.0 */ +typedef int (*curl_progress_callback)(void *clientp, + double dltotal, + double dlnow, + double ultotal, + double ulnow); + +/* This is the CURLOPT_XFERINFOFUNCTION callback proto. It was introduced in + 7.32.0, it avoids floating point and provides more detailed information. */ +typedef int (*curl_xferinfo_callback)(void *clientp, + curl_off_t dltotal, + curl_off_t dlnow, + curl_off_t ultotal, + curl_off_t ulnow); + +#ifndef CURL_MAX_WRITE_SIZE + /* Tests have proven that 20K is a very bad buffer size for uploads on + Windows, while 16K for some odd reason performed a lot better. + We do the ifndef check to allow this value to easier be changed at build + time for those who feel adventurous. The practical minimum is about + 400 bytes since libcurl uses a buffer of this size as a scratch area + (unrelated to network send operations). */ +#define CURL_MAX_WRITE_SIZE 16384 +#endif + +#ifndef CURL_MAX_HTTP_HEADER +/* The only reason to have a max limit for this is to avoid the risk of a bad + server feeding libcurl with a never-ending header that will cause reallocs + infinitely */ +#define CURL_MAX_HTTP_HEADER (100*1024) +#endif + +/* This is a magic return code for the write callback that, when returned, + will signal libcurl to pause receiving on the current transfer. */ +#define CURL_WRITEFUNC_PAUSE 0x10000001 + +typedef size_t (*curl_write_callback)(char *buffer, + size_t size, + size_t nitems, + void *outstream); + + + +/* enumeration of file types */ +typedef enum { + CURLFILETYPE_FILE = 0, + CURLFILETYPE_DIRECTORY, + CURLFILETYPE_SYMLINK, + CURLFILETYPE_DEVICE_BLOCK, + CURLFILETYPE_DEVICE_CHAR, + CURLFILETYPE_NAMEDPIPE, + CURLFILETYPE_SOCKET, + CURLFILETYPE_DOOR, /* is possible only on Sun Solaris now */ + + CURLFILETYPE_UNKNOWN /* should never occur */ +} curlfiletype; + +#define CURLFINFOFLAG_KNOWN_FILENAME (1<<0) +#define CURLFINFOFLAG_KNOWN_FILETYPE (1<<1) +#define CURLFINFOFLAG_KNOWN_TIME (1<<2) +#define CURLFINFOFLAG_KNOWN_PERM (1<<3) +#define CURLFINFOFLAG_KNOWN_UID (1<<4) +#define CURLFINFOFLAG_KNOWN_GID (1<<5) +#define CURLFINFOFLAG_KNOWN_SIZE (1<<6) +#define CURLFINFOFLAG_KNOWN_HLINKCOUNT (1<<7) + +/* Content of this structure depends on information which is known and is + achievable (e.g. by FTP LIST parsing). Please see the url_easy_setopt(3) man + page for callbacks returning this structure -- some fields are mandatory, + some others are optional. The FLAG field has special meaning. */ +struct curl_fileinfo { + char *filename; + curlfiletype filetype; + time_t time; + unsigned int perm; + int uid; + int gid; + curl_off_t size; + long int hardlinks; + + struct { + /* If some of these fields is not NULL, it is a pointer to b_data. */ + char *time; + char *perm; + char *user; + char *group; + char *target; /* pointer to the target filename of a symlink */ + } strings; + + unsigned int flags; + + /* used internally */ + char *b_data; + size_t b_size; + size_t b_used; +}; + +/* return codes for CURLOPT_CHUNK_BGN_FUNCTION */ +#define CURL_CHUNK_BGN_FUNC_OK 0 +#define CURL_CHUNK_BGN_FUNC_FAIL 1 /* tell the lib to end the task */ +#define CURL_CHUNK_BGN_FUNC_SKIP 2 /* skip this chunk over */ + +/* if splitting of data transfer is enabled, this callback is called before + download of an individual chunk started. Note that parameter "remains" works + only for FTP wildcard downloading (for now), otherwise is not used */ +typedef long (*curl_chunk_bgn_callback)(const void *transfer_info, + void *ptr, + int remains); + +/* return codes for CURLOPT_CHUNK_END_FUNCTION */ +#define CURL_CHUNK_END_FUNC_OK 0 +#define CURL_CHUNK_END_FUNC_FAIL 1 /* tell the lib to end the task */ + +/* If splitting of data transfer is enabled this callback is called after + download of an individual chunk finished. + Note! After this callback was set then it have to be called FOR ALL chunks. + Even if downloading of this chunk was skipped in CHUNK_BGN_FUNC. + This is the reason why we don't need "transfer_info" parameter in this + callback and we are not interested in "remains" parameter too. */ +typedef long (*curl_chunk_end_callback)(void *ptr); + +/* return codes for FNMATCHFUNCTION */ +#define CURL_FNMATCHFUNC_MATCH 0 /* string corresponds to the pattern */ +#define CURL_FNMATCHFUNC_NOMATCH 1 /* pattern doesn't match the string */ +#define CURL_FNMATCHFUNC_FAIL 2 /* an error occurred */ + +/* callback type for wildcard downloading pattern matching. If the + string matches the pattern, return CURL_FNMATCHFUNC_MATCH value, etc. */ +typedef int (*curl_fnmatch_callback)(void *ptr, + const char *pattern, + const char *string); + +/* These are the return codes for the seek callbacks */ +#define CURL_SEEKFUNC_OK 0 +#define CURL_SEEKFUNC_FAIL 1 /* fail the entire transfer */ +#define CURL_SEEKFUNC_CANTSEEK 2 /* tell libcurl seeking can't be done, so + libcurl might try other means instead */ +typedef int (*curl_seek_callback)(void *instream, + curl_off_t offset, + int origin); /* 'whence' */ + +/* This is a return code for the read callback that, when returned, will + signal libcurl to immediately abort the current transfer. */ +#define CURL_READFUNC_ABORT 0x10000000 +/* This is a return code for the read callback that, when returned, will + signal libcurl to pause sending data on the current transfer. */ +#define CURL_READFUNC_PAUSE 0x10000001 + +typedef size_t (*curl_read_callback)(char *buffer, + size_t size, + size_t nitems, + void *instream); + +typedef enum { + CURLSOCKTYPE_IPCXN, /* socket created for a specific IP connection */ + CURLSOCKTYPE_ACCEPT, /* socket created by accept() call */ + CURLSOCKTYPE_LAST /* never use */ +} curlsocktype; + +/* The return code from the sockopt_callback can signal information back + to libcurl: */ +#define CURL_SOCKOPT_OK 0 +#define CURL_SOCKOPT_ERROR 1 /* causes libcurl to abort and return + CURLE_ABORTED_BY_CALLBACK */ +#define CURL_SOCKOPT_ALREADY_CONNECTED 2 + +typedef int (*curl_sockopt_callback)(void *clientp, + curl_socket_t curlfd, + curlsocktype purpose); + +struct curl_sockaddr { + int family; + int socktype; + int protocol; + unsigned int addrlen; /* addrlen was a socklen_t type before 7.18.0 but it + turned really ugly and painful on the systems that + lack this type */ + struct sockaddr addr; +}; + +typedef curl_socket_t +(*curl_opensocket_callback)(void *clientp, + curlsocktype purpose, + struct curl_sockaddr *address); + +typedef int +(*curl_closesocket_callback)(void *clientp, curl_socket_t item); + +typedef enum { + CURLIOE_OK, /* I/O operation successful */ + CURLIOE_UNKNOWNCMD, /* command was unknown to callback */ + CURLIOE_FAILRESTART, /* failed to restart the read */ + CURLIOE_LAST /* never use */ +} curlioerr; + +typedef enum { + CURLIOCMD_NOP, /* no operation */ + CURLIOCMD_RESTARTREAD, /* restart the read stream from start */ + CURLIOCMD_LAST /* never use */ +} curliocmd; + +typedef curlioerr (*curl_ioctl_callback)(CURL *handle, + int cmd, + void *clientp); + +#ifndef CURL_DID_MEMORY_FUNC_TYPEDEFS +/* + * The following typedef's are signatures of malloc, free, realloc, strdup and + * calloc respectively. Function pointers of these types can be passed to the + * curl_global_init_mem() function to set user defined memory management + * callback routines. + */ +typedef void *(*curl_malloc_callback)(size_t size); +typedef void (*curl_free_callback)(void *ptr); +typedef void *(*curl_realloc_callback)(void *ptr, size_t size); +typedef char *(*curl_strdup_callback)(const char *str); +typedef void *(*curl_calloc_callback)(size_t nmemb, size_t size); + +#define CURL_DID_MEMORY_FUNC_TYPEDEFS +#endif + +/* the kind of data that is passed to information_callback*/ +typedef enum { + CURLINFO_TEXT = 0, + CURLINFO_HEADER_IN, /* 1 */ + CURLINFO_HEADER_OUT, /* 2 */ + CURLINFO_DATA_IN, /* 3 */ + CURLINFO_DATA_OUT, /* 4 */ + CURLINFO_SSL_DATA_IN, /* 5 */ + CURLINFO_SSL_DATA_OUT, /* 6 */ + CURLINFO_END +} curl_infotype; + +typedef int (*curl_debug_callback) + (CURL *handle, /* the handle/transfer this concerns */ + curl_infotype type, /* what kind of data */ + char *data, /* points to the data */ + size_t size, /* size of the data pointed to */ + void *userptr); /* whatever the user please */ + +/* All possible error codes from all sorts of curl functions. Future versions + may return other values, stay prepared. + + Always add new return codes last. Never *EVER* remove any. The return + codes must remain the same! + */ + +typedef enum { + CURLE_OK = 0, + CURLE_UNSUPPORTED_PROTOCOL, /* 1 */ + CURLE_FAILED_INIT, /* 2 */ + CURLE_URL_MALFORMAT, /* 3 */ + CURLE_NOT_BUILT_IN, /* 4 - [was obsoleted in August 2007 for + 7.17.0, reused in April 2011 for 7.21.5] */ + CURLE_COULDNT_RESOLVE_PROXY, /* 5 */ + CURLE_COULDNT_RESOLVE_HOST, /* 6 */ + CURLE_COULDNT_CONNECT, /* 7 */ + CURLE_WEIRD_SERVER_REPLY, /* 8 */ + CURLE_REMOTE_ACCESS_DENIED, /* 9 a service was denied by the server + due to lack of access - when login fails + this is not returned. */ + CURLE_FTP_ACCEPT_FAILED, /* 10 - [was obsoleted in April 2006 for + 7.15.4, reused in Dec 2011 for 7.24.0]*/ + CURLE_FTP_WEIRD_PASS_REPLY, /* 11 */ + CURLE_FTP_ACCEPT_TIMEOUT, /* 12 - timeout occurred accepting server + [was obsoleted in August 2007 for 7.17.0, + reused in Dec 2011 for 7.24.0]*/ + CURLE_FTP_WEIRD_PASV_REPLY, /* 13 */ + CURLE_FTP_WEIRD_227_FORMAT, /* 14 */ + CURLE_FTP_CANT_GET_HOST, /* 15 */ + CURLE_HTTP2, /* 16 - A problem in the http2 framing layer. + [was obsoleted in August 2007 for 7.17.0, + reused in July 2014 for 7.38.0] */ + CURLE_FTP_COULDNT_SET_TYPE, /* 17 */ + CURLE_PARTIAL_FILE, /* 18 */ + CURLE_FTP_COULDNT_RETR_FILE, /* 19 */ + CURLE_OBSOLETE20, /* 20 - NOT USED */ + CURLE_QUOTE_ERROR, /* 21 - quote command failure */ + CURLE_HTTP_RETURNED_ERROR, /* 22 */ + CURLE_WRITE_ERROR, /* 23 */ + CURLE_OBSOLETE24, /* 24 - NOT USED */ + CURLE_UPLOAD_FAILED, /* 25 - failed upload "command" */ + CURLE_READ_ERROR, /* 26 - couldn't open/read from file */ + CURLE_OUT_OF_MEMORY, /* 27 */ + /* Note: CURLE_OUT_OF_MEMORY may sometimes indicate a conversion error + instead of a memory allocation error if CURL_DOES_CONVERSIONS + is defined + */ + CURLE_OPERATION_TIMEDOUT, /* 28 - the timeout time was reached */ + CURLE_OBSOLETE29, /* 29 - NOT USED */ + CURLE_FTP_PORT_FAILED, /* 30 - FTP PORT operation failed */ + CURLE_FTP_COULDNT_USE_REST, /* 31 - the REST command failed */ + CURLE_OBSOLETE32, /* 32 - NOT USED */ + CURLE_RANGE_ERROR, /* 33 - RANGE "command" didn't work */ + CURLE_HTTP_POST_ERROR, /* 34 */ + CURLE_SSL_CONNECT_ERROR, /* 35 - wrong when connecting with SSL */ + CURLE_BAD_DOWNLOAD_RESUME, /* 36 - couldn't resume download */ + CURLE_FILE_COULDNT_READ_FILE, /* 37 */ + CURLE_LDAP_CANNOT_BIND, /* 38 */ + CURLE_LDAP_SEARCH_FAILED, /* 39 */ + CURLE_OBSOLETE40, /* 40 - NOT USED */ + CURLE_FUNCTION_NOT_FOUND, /* 41 */ + CURLE_ABORTED_BY_CALLBACK, /* 42 */ + CURLE_BAD_FUNCTION_ARGUMENT, /* 43 */ + CURLE_OBSOLETE44, /* 44 - NOT USED */ + CURLE_INTERFACE_FAILED, /* 45 - CURLOPT_INTERFACE failed */ + CURLE_OBSOLETE46, /* 46 - NOT USED */ + CURLE_TOO_MANY_REDIRECTS, /* 47 - catch endless re-direct loops */ + CURLE_UNKNOWN_OPTION, /* 48 - User specified an unknown option */ + CURLE_TELNET_OPTION_SYNTAX, /* 49 - Malformed telnet option */ + CURLE_OBSOLETE50, /* 50 - NOT USED */ + CURLE_PEER_FAILED_VERIFICATION, /* 51 - peer's certificate or fingerprint + wasn't verified fine */ + CURLE_GOT_NOTHING, /* 52 - when this is a specific error */ + CURLE_SSL_ENGINE_NOTFOUND, /* 53 - SSL crypto engine not found */ + CURLE_SSL_ENGINE_SETFAILED, /* 54 - can not set SSL crypto engine as + default */ + CURLE_SEND_ERROR, /* 55 - failed sending network data */ + CURLE_RECV_ERROR, /* 56 - failure in receiving network data */ + CURLE_OBSOLETE57, /* 57 - NOT IN USE */ + CURLE_SSL_CERTPROBLEM, /* 58 - problem with the local certificate */ + CURLE_SSL_CIPHER, /* 59 - couldn't use specified cipher */ + CURLE_SSL_CACERT, /* 60 - problem with the CA cert (path?) */ + CURLE_BAD_CONTENT_ENCODING, /* 61 - Unrecognized/bad encoding */ + CURLE_LDAP_INVALID_URL, /* 62 - Invalid LDAP URL */ + CURLE_FILESIZE_EXCEEDED, /* 63 - Maximum file size exceeded */ + CURLE_USE_SSL_FAILED, /* 64 - Requested FTP SSL level failed */ + CURLE_SEND_FAIL_REWIND, /* 65 - Sending the data requires a rewind + that failed */ + CURLE_SSL_ENGINE_INITFAILED, /* 66 - failed to initialise ENGINE */ + CURLE_LOGIN_DENIED, /* 67 - user, password or similar was not + accepted and we failed to login */ + CURLE_TFTP_NOTFOUND, /* 68 - file not found on server */ + CURLE_TFTP_PERM, /* 69 - permission problem on server */ + CURLE_REMOTE_DISK_FULL, /* 70 - out of disk space on server */ + CURLE_TFTP_ILLEGAL, /* 71 - Illegal TFTP operation */ + CURLE_TFTP_UNKNOWNID, /* 72 - Unknown transfer ID */ + CURLE_REMOTE_FILE_EXISTS, /* 73 - File already exists */ + CURLE_TFTP_NOSUCHUSER, /* 74 - No such user */ + CURLE_CONV_FAILED, /* 75 - conversion failed */ + CURLE_CONV_REQD, /* 76 - caller must register conversion + callbacks using curl_easy_setopt options + CURLOPT_CONV_FROM_NETWORK_FUNCTION, + CURLOPT_CONV_TO_NETWORK_FUNCTION, and + CURLOPT_CONV_FROM_UTF8_FUNCTION */ + CURLE_SSL_CACERT_BADFILE, /* 77 - could not load CACERT file, missing + or wrong format */ + CURLE_REMOTE_FILE_NOT_FOUND, /* 78 - remote file not found */ + CURLE_SSH, /* 79 - error from the SSH layer, somewhat + generic so the error message will be of + interest when this has happened */ + + CURLE_SSL_SHUTDOWN_FAILED, /* 80 - Failed to shut down the SSL + connection */ + CURLE_AGAIN, /* 81 - socket is not ready for send/recv, + wait till it's ready and try again (Added + in 7.18.2) */ + CURLE_SSL_CRL_BADFILE, /* 82 - could not load CRL file, missing or + wrong format (Added in 7.19.0) */ + CURLE_SSL_ISSUER_ERROR, /* 83 - Issuer check failed. (Added in + 7.19.0) */ + CURLE_FTP_PRET_FAILED, /* 84 - a PRET command failed */ + CURLE_RTSP_CSEQ_ERROR, /* 85 - mismatch of RTSP CSeq numbers */ + CURLE_RTSP_SESSION_ERROR, /* 86 - mismatch of RTSP Session Ids */ + CURLE_FTP_BAD_FILE_LIST, /* 87 - unable to parse FTP file list */ + CURLE_CHUNK_FAILED, /* 88 - chunk callback reported error */ + CURLE_NO_CONNECTION_AVAILABLE, /* 89 - No connection available, the + session will be queued */ + CURLE_SSL_PINNEDPUBKEYNOTMATCH, /* 90 - specified pinned public key did not + match */ + CURLE_SSL_INVALIDCERTSTATUS, /* 91 - invalid certificate status */ + CURLE_HTTP2_STREAM, /* 92 - stream error in HTTP/2 framing layer + */ + CURL_LAST /* never use! */ +} CURLcode; + +#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all + the obsolete stuff removed! */ + +/* Previously obsolete error code re-used in 7.38.0 */ +#define CURLE_OBSOLETE16 CURLE_HTTP2 + +/* Previously obsolete error codes re-used in 7.24.0 */ +#define CURLE_OBSOLETE10 CURLE_FTP_ACCEPT_FAILED +#define CURLE_OBSOLETE12 CURLE_FTP_ACCEPT_TIMEOUT + +/* compatibility with older names */ +#define CURLOPT_ENCODING CURLOPT_ACCEPT_ENCODING +#define CURLE_FTP_WEIRD_SERVER_REPLY CURLE_WEIRD_SERVER_REPLY + +/* The following were added in 7.21.5, April 2011 */ +#define CURLE_UNKNOWN_TELNET_OPTION CURLE_UNKNOWN_OPTION + +/* The following were added in 7.17.1 */ +/* These are scheduled to disappear by 2009 */ +#define CURLE_SSL_PEER_CERTIFICATE CURLE_PEER_FAILED_VERIFICATION + +/* The following were added in 7.17.0 */ +/* These are scheduled to disappear by 2009 */ +#define CURLE_OBSOLETE CURLE_OBSOLETE50 /* no one should be using this! */ +#define CURLE_BAD_PASSWORD_ENTERED CURLE_OBSOLETE46 +#define CURLE_BAD_CALLING_ORDER CURLE_OBSOLETE44 +#define CURLE_FTP_USER_PASSWORD_INCORRECT CURLE_OBSOLETE10 +#define CURLE_FTP_CANT_RECONNECT CURLE_OBSOLETE16 +#define CURLE_FTP_COULDNT_GET_SIZE CURLE_OBSOLETE32 +#define CURLE_FTP_COULDNT_SET_ASCII CURLE_OBSOLETE29 +#define CURLE_FTP_WEIRD_USER_REPLY CURLE_OBSOLETE12 +#define CURLE_FTP_WRITE_ERROR CURLE_OBSOLETE20 +#define CURLE_LIBRARY_NOT_FOUND CURLE_OBSOLETE40 +#define CURLE_MALFORMAT_USER CURLE_OBSOLETE24 +#define CURLE_SHARE_IN_USE CURLE_OBSOLETE57 +#define CURLE_URL_MALFORMAT_USER CURLE_NOT_BUILT_IN + +#define CURLE_FTP_ACCESS_DENIED CURLE_REMOTE_ACCESS_DENIED +#define CURLE_FTP_COULDNT_SET_BINARY CURLE_FTP_COULDNT_SET_TYPE +#define CURLE_FTP_QUOTE_ERROR CURLE_QUOTE_ERROR +#define CURLE_TFTP_DISKFULL CURLE_REMOTE_DISK_FULL +#define CURLE_TFTP_EXISTS CURLE_REMOTE_FILE_EXISTS +#define CURLE_HTTP_RANGE_ERROR CURLE_RANGE_ERROR +#define CURLE_FTP_SSL_FAILED CURLE_USE_SSL_FAILED + +/* The following were added earlier */ + +#define CURLE_OPERATION_TIMEOUTED CURLE_OPERATION_TIMEDOUT + +#define CURLE_HTTP_NOT_FOUND CURLE_HTTP_RETURNED_ERROR +#define CURLE_HTTP_PORT_FAILED CURLE_INTERFACE_FAILED +#define CURLE_FTP_COULDNT_STOR_FILE CURLE_UPLOAD_FAILED + +#define CURLE_FTP_PARTIAL_FILE CURLE_PARTIAL_FILE +#define CURLE_FTP_BAD_DOWNLOAD_RESUME CURLE_BAD_DOWNLOAD_RESUME + +/* This was the error code 50 in 7.7.3 and a few earlier versions, this + is no longer used by libcurl but is instead #defined here only to not + make programs break */ +#define CURLE_ALREADY_COMPLETE 99999 + +/* Provide defines for really old option names */ +#define CURLOPT_FILE CURLOPT_WRITEDATA /* name changed in 7.9.7 */ +#define CURLOPT_INFILE CURLOPT_READDATA /* name changed in 7.9.7 */ +#define CURLOPT_WRITEHEADER CURLOPT_HEADERDATA + +/* Since long deprecated options with no code in the lib that does anything + with them. */ +#define CURLOPT_WRITEINFO CURLOPT_OBSOLETE40 +#define CURLOPT_CLOSEPOLICY CURLOPT_OBSOLETE72 + +#endif /*!CURL_NO_OLDIES*/ + +/* This prototype applies to all conversion callbacks */ +typedef CURLcode (*curl_conv_callback)(char *buffer, size_t length); + +typedef CURLcode (*curl_ssl_ctx_callback)(CURL *curl, /* easy handle */ + void *ssl_ctx, /* actually an + OpenSSL SSL_CTX */ + void *userptr); + +typedef enum { + CURLPROXY_HTTP = 0, /* added in 7.10, new in 7.19.4 default is to use + CONNECT HTTP/1.1 */ + CURLPROXY_HTTP_1_0 = 1, /* added in 7.19.4, force to use CONNECT + HTTP/1.0 */ + CURLPROXY_HTTPS = 2, /* added in 7.52.0 */ + CURLPROXY_SOCKS4 = 4, /* support added in 7.15.2, enum existed already + in 7.10 */ + CURLPROXY_SOCKS5 = 5, /* added in 7.10 */ + CURLPROXY_SOCKS4A = 6, /* added in 7.18.0 */ + CURLPROXY_SOCKS5_HOSTNAME = 7 /* Use the SOCKS5 protocol but pass along the + host name rather than the IP address. added + in 7.18.0 */ +} curl_proxytype; /* this enum was added in 7.10 */ + +/* + * Bitmasks for CURLOPT_HTTPAUTH and CURLOPT_PROXYAUTH options: + * + * CURLAUTH_NONE - No HTTP authentication + * CURLAUTH_BASIC - HTTP Basic authentication (default) + * CURLAUTH_DIGEST - HTTP Digest authentication + * CURLAUTH_NEGOTIATE - HTTP Negotiate (SPNEGO) authentication + * CURLAUTH_GSSNEGOTIATE - Alias for CURLAUTH_NEGOTIATE (deprecated) + * CURLAUTH_NTLM - HTTP NTLM authentication + * CURLAUTH_DIGEST_IE - HTTP Digest authentication with IE flavour + * CURLAUTH_NTLM_WB - HTTP NTLM authentication delegated to winbind helper + * CURLAUTH_ONLY - Use together with a single other type to force no + * authentication or just that single type + * CURLAUTH_ANY - All fine types set + * CURLAUTH_ANYSAFE - All fine types except Basic + */ + +#define CURLAUTH_NONE ((unsigned long)0) +#define CURLAUTH_BASIC (((unsigned long)1)<<0) +#define CURLAUTH_DIGEST (((unsigned long)1)<<1) +#define CURLAUTH_NEGOTIATE (((unsigned long)1)<<2) +/* Deprecated since the advent of CURLAUTH_NEGOTIATE */ +#define CURLAUTH_GSSNEGOTIATE CURLAUTH_NEGOTIATE +#define CURLAUTH_NTLM (((unsigned long)1)<<3) +#define CURLAUTH_DIGEST_IE (((unsigned long)1)<<4) +#define CURLAUTH_NTLM_WB (((unsigned long)1)<<5) +#define CURLAUTH_ONLY (((unsigned long)1)<<31) +#define CURLAUTH_ANY (~CURLAUTH_DIGEST_IE) +#define CURLAUTH_ANYSAFE (~(CURLAUTH_BASIC|CURLAUTH_DIGEST_IE)) + +#define CURLSSH_AUTH_ANY ~0 /* all types supported by the server */ +#define CURLSSH_AUTH_NONE 0 /* none allowed, silly but complete */ +#define CURLSSH_AUTH_PUBLICKEY (1<<0) /* public/private key files */ +#define CURLSSH_AUTH_PASSWORD (1<<1) /* password */ +#define CURLSSH_AUTH_HOST (1<<2) /* host key files */ +#define CURLSSH_AUTH_KEYBOARD (1<<3) /* keyboard interactive */ +#define CURLSSH_AUTH_AGENT (1<<4) /* agent (ssh-agent, pageant...) */ +#define CURLSSH_AUTH_DEFAULT CURLSSH_AUTH_ANY + +#define CURLGSSAPI_DELEGATION_NONE 0 /* no delegation (default) */ +#define CURLGSSAPI_DELEGATION_POLICY_FLAG (1<<0) /* if permitted by policy */ +#define CURLGSSAPI_DELEGATION_FLAG (1<<1) /* delegate always */ + +#define CURL_ERROR_SIZE 256 + +enum curl_khtype { + CURLKHTYPE_UNKNOWN, + CURLKHTYPE_RSA1, + CURLKHTYPE_RSA, + CURLKHTYPE_DSS +}; + +struct curl_khkey { + const char *key; /* points to a zero-terminated string encoded with base64 + if len is zero, otherwise to the "raw" data */ + size_t len; + enum curl_khtype keytype; +}; + +/* this is the set of return values expected from the curl_sshkeycallback + callback */ +enum curl_khstat { + CURLKHSTAT_FINE_ADD_TO_FILE, + CURLKHSTAT_FINE, + CURLKHSTAT_REJECT, /* reject the connection, return an error */ + CURLKHSTAT_DEFER, /* do not accept it, but we can't answer right now so + this causes a CURLE_DEFER error but otherwise the + connection will be left intact etc */ + CURLKHSTAT_LAST /* not for use, only a marker for last-in-list */ +}; + +/* this is the set of status codes pass in to the callback */ +enum curl_khmatch { + CURLKHMATCH_OK, /* match */ + CURLKHMATCH_MISMATCH, /* host found, key mismatch! */ + CURLKHMATCH_MISSING, /* no matching host/key found */ + CURLKHMATCH_LAST /* not for use, only a marker for last-in-list */ +}; + +typedef int + (*curl_sshkeycallback) (CURL *easy, /* easy handle */ + const struct curl_khkey *knownkey, /* known */ + const struct curl_khkey *foundkey, /* found */ + enum curl_khmatch, /* libcurl's view on the keys */ + void *clientp); /* custom pointer passed from app */ + +/* parameter for the CURLOPT_USE_SSL option */ +typedef enum { + CURLUSESSL_NONE, /* do not attempt to use SSL */ + CURLUSESSL_TRY, /* try using SSL, proceed anyway otherwise */ + CURLUSESSL_CONTROL, /* SSL for the control connection or fail */ + CURLUSESSL_ALL, /* SSL for all communication or fail */ + CURLUSESSL_LAST /* not an option, never use */ +} curl_usessl; + +/* Definition of bits for the CURLOPT_SSL_OPTIONS argument: */ + +/* - ALLOW_BEAST tells libcurl to allow the BEAST SSL vulnerability in the + name of improving interoperability with older servers. Some SSL libraries + have introduced work-arounds for this flaw but those work-arounds sometimes + make the SSL communication fail. To regain functionality with those broken + servers, a user can this way allow the vulnerability back. */ +#define CURLSSLOPT_ALLOW_BEAST (1<<0) + +/* - NO_REVOKE tells libcurl to disable certificate revocation checks for those + SSL backends where such behavior is present. */ +#define CURLSSLOPT_NO_REVOKE (1<<1) + +#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all + the obsolete stuff removed! */ + +/* Backwards compatibility with older names */ +/* These are scheduled to disappear by 2009 */ + +#define CURLFTPSSL_NONE CURLUSESSL_NONE +#define CURLFTPSSL_TRY CURLUSESSL_TRY +#define CURLFTPSSL_CONTROL CURLUSESSL_CONTROL +#define CURLFTPSSL_ALL CURLUSESSL_ALL +#define CURLFTPSSL_LAST CURLUSESSL_LAST +#define curl_ftpssl curl_usessl +#endif /*!CURL_NO_OLDIES*/ + +/* parameter for the CURLOPT_FTP_SSL_CCC option */ +typedef enum { + CURLFTPSSL_CCC_NONE, /* do not send CCC */ + CURLFTPSSL_CCC_PASSIVE, /* Let the server initiate the shutdown */ + CURLFTPSSL_CCC_ACTIVE, /* Initiate the shutdown */ + CURLFTPSSL_CCC_LAST /* not an option, never use */ +} curl_ftpccc; + +/* parameter for the CURLOPT_FTPSSLAUTH option */ +typedef enum { + CURLFTPAUTH_DEFAULT, /* let libcurl decide */ + CURLFTPAUTH_SSL, /* use "AUTH SSL" */ + CURLFTPAUTH_TLS, /* use "AUTH TLS" */ + CURLFTPAUTH_LAST /* not an option, never use */ +} curl_ftpauth; + +/* parameter for the CURLOPT_FTP_CREATE_MISSING_DIRS option */ +typedef enum { + CURLFTP_CREATE_DIR_NONE, /* do NOT create missing dirs! */ + CURLFTP_CREATE_DIR, /* (FTP/SFTP) if CWD fails, try MKD and then CWD + again if MKD succeeded, for SFTP this does + similar magic */ + CURLFTP_CREATE_DIR_RETRY, /* (FTP only) if CWD fails, try MKD and then CWD + again even if MKD failed! */ + CURLFTP_CREATE_DIR_LAST /* not an option, never use */ +} curl_ftpcreatedir; + +/* parameter for the CURLOPT_FTP_FILEMETHOD option */ +typedef enum { + CURLFTPMETHOD_DEFAULT, /* let libcurl pick */ + CURLFTPMETHOD_MULTICWD, /* single CWD operation for each path part */ + CURLFTPMETHOD_NOCWD, /* no CWD at all */ + CURLFTPMETHOD_SINGLECWD, /* one CWD to full dir, then work on file */ + CURLFTPMETHOD_LAST /* not an option, never use */ +} curl_ftpmethod; + +/* bitmask defines for CURLOPT_HEADEROPT */ +#define CURLHEADER_UNIFIED 0 +#define CURLHEADER_SEPARATE (1<<0) + +/* CURLPROTO_ defines are for the CURLOPT_*PROTOCOLS options */ +#define CURLPROTO_HTTP (1<<0) +#define CURLPROTO_HTTPS (1<<1) +#define CURLPROTO_FTP (1<<2) +#define CURLPROTO_FTPS (1<<3) +#define CURLPROTO_SCP (1<<4) +#define CURLPROTO_SFTP (1<<5) +#define CURLPROTO_TELNET (1<<6) +#define CURLPROTO_LDAP (1<<7) +#define CURLPROTO_LDAPS (1<<8) +#define CURLPROTO_DICT (1<<9) +#define CURLPROTO_FILE (1<<10) +#define CURLPROTO_TFTP (1<<11) +#define CURLPROTO_IMAP (1<<12) +#define CURLPROTO_IMAPS (1<<13) +#define CURLPROTO_POP3 (1<<14) +#define CURLPROTO_POP3S (1<<15) +#define CURLPROTO_SMTP (1<<16) +#define CURLPROTO_SMTPS (1<<17) +#define CURLPROTO_RTSP (1<<18) +#define CURLPROTO_RTMP (1<<19) +#define CURLPROTO_RTMPT (1<<20) +#define CURLPROTO_RTMPE (1<<21) +#define CURLPROTO_RTMPTE (1<<22) +#define CURLPROTO_RTMPS (1<<23) +#define CURLPROTO_RTMPTS (1<<24) +#define CURLPROTO_GOPHER (1<<25) +#define CURLPROTO_SMB (1<<26) +#define CURLPROTO_SMBS (1<<27) +#define CURLPROTO_ALL (~0) /* enable everything */ + +/* long may be 32 or 64 bits, but we should never depend on anything else + but 32 */ +#define CURLOPTTYPE_LONG 0 +#define CURLOPTTYPE_OBJECTPOINT 10000 +#define CURLOPTTYPE_STRINGPOINT 10000 +#define CURLOPTTYPE_FUNCTIONPOINT 20000 +#define CURLOPTTYPE_OFF_T 30000 + +/* *STRINGPOINT is an alias for OBJECTPOINT to allow tools to extract the + string options from the header file */ + +/* name is uppercase CURLOPT_, + type is one of the defined CURLOPTTYPE_ + number is unique identifier */ +#ifdef CINIT +#undef CINIT +#endif + +#ifdef CURL_ISOCPP +#define CINIT(na,t,nu) CURLOPT_ ## na = CURLOPTTYPE_ ## t + nu +#else +/* The macro "##" is ISO C, we assume pre-ISO C doesn't support it. */ +#define LONG CURLOPTTYPE_LONG +#define OBJECTPOINT CURLOPTTYPE_OBJECTPOINT +#define STRINGPOINT CURLOPTTYPE_OBJECTPOINT +#define FUNCTIONPOINT CURLOPTTYPE_FUNCTIONPOINT +#define OFF_T CURLOPTTYPE_OFF_T +#define CINIT(name,type,number) CURLOPT_/**/name = type + number +#endif + +/* + * This macro-mania below setups the CURLOPT_[what] enum, to be used with + * curl_easy_setopt(). The first argument in the CINIT() macro is the [what] + * word. + */ + +typedef enum { + /* This is the FILE * or void * the regular output should be written to. */ + CINIT(WRITEDATA, OBJECTPOINT, 1), + + /* The full URL to get/put */ + CINIT(URL, STRINGPOINT, 2), + + /* Port number to connect to, if other than default. */ + CINIT(PORT, LONG, 3), + + /* Name of proxy to use. */ + CINIT(PROXY, STRINGPOINT, 4), + + /* "user:password;options" to use when fetching. */ + CINIT(USERPWD, STRINGPOINT, 5), + + /* "user:password" to use with proxy. */ + CINIT(PROXYUSERPWD, STRINGPOINT, 6), + + /* Range to get, specified as an ASCII string. */ + CINIT(RANGE, STRINGPOINT, 7), + + /* not used */ + + /* Specified file stream to upload from (use as input): */ + CINIT(READDATA, OBJECTPOINT, 9), + + /* Buffer to receive error messages in, must be at least CURL_ERROR_SIZE + * bytes big. If this is not used, error messages go to stderr instead: */ + CINIT(ERRORBUFFER, OBJECTPOINT, 10), + + /* Function that will be called to store the output (instead of fwrite). The + * parameters will use fwrite() syntax, make sure to follow them. */ + CINIT(WRITEFUNCTION, FUNCTIONPOINT, 11), + + /* Function that will be called to read the input (instead of fread). The + * parameters will use fread() syntax, make sure to follow them. */ + CINIT(READFUNCTION, FUNCTIONPOINT, 12), + + /* Time-out the read operation after this amount of seconds */ + CINIT(TIMEOUT, LONG, 13), + + /* If the CURLOPT_INFILE is used, this can be used to inform libcurl about + * how large the file being sent really is. That allows better error + * checking and better verifies that the upload was successful. -1 means + * unknown size. + * + * For large file support, there is also a _LARGE version of the key + * which takes an off_t type, allowing platforms with larger off_t + * sizes to handle larger files. See below for INFILESIZE_LARGE. + */ + CINIT(INFILESIZE, LONG, 14), + + /* POST static input fields. */ + CINIT(POSTFIELDS, OBJECTPOINT, 15), + + /* Set the referrer page (needed by some CGIs) */ + CINIT(REFERER, STRINGPOINT, 16), + + /* Set the FTP PORT string (interface name, named or numerical IP address) + Use i.e '-' to use default address. */ + CINIT(FTPPORT, STRINGPOINT, 17), + + /* Set the User-Agent string (examined by some CGIs) */ + CINIT(USERAGENT, STRINGPOINT, 18), + + /* If the download receives less than "low speed limit" bytes/second + * during "low speed time" seconds, the operations is aborted. + * You could i.e if you have a pretty high speed connection, abort if + * it is less than 2000 bytes/sec during 20 seconds. + */ + + /* Set the "low speed limit" */ + CINIT(LOW_SPEED_LIMIT, LONG, 19), + + /* Set the "low speed time" */ + CINIT(LOW_SPEED_TIME, LONG, 20), + + /* Set the continuation offset. + * + * Note there is also a _LARGE version of this key which uses + * off_t types, allowing for large file offsets on platforms which + * use larger-than-32-bit off_t's. Look below for RESUME_FROM_LARGE. + */ + CINIT(RESUME_FROM, LONG, 21), + + /* Set cookie in request: */ + CINIT(COOKIE, STRINGPOINT, 22), + + /* This points to a linked list of headers, struct curl_slist kind. This + list is also used for RTSP (in spite of its name) */ + CINIT(HTTPHEADER, OBJECTPOINT, 23), + + /* This points to a linked list of post entries, struct curl_httppost */ + CINIT(HTTPPOST, OBJECTPOINT, 24), + + /* name of the file keeping your private SSL-certificate */ + CINIT(SSLCERT, STRINGPOINT, 25), + + /* password for the SSL or SSH private key */ + CINIT(KEYPASSWD, STRINGPOINT, 26), + + /* send TYPE parameter? */ + CINIT(CRLF, LONG, 27), + + /* send linked-list of QUOTE commands */ + CINIT(QUOTE, OBJECTPOINT, 28), + + /* send FILE * or void * to store headers to, if you use a callback it + is simply passed to the callback unmodified */ + CINIT(HEADERDATA, OBJECTPOINT, 29), + + /* point to a file to read the initial cookies from, also enables + "cookie awareness" */ + CINIT(COOKIEFILE, STRINGPOINT, 31), + + /* What version to specifically try to use. + See CURL_SSLVERSION defines below. */ + CINIT(SSLVERSION, LONG, 32), + + /* What kind of HTTP time condition to use, see defines */ + CINIT(TIMECONDITION, LONG, 33), + + /* Time to use with the above condition. Specified in number of seconds + since 1 Jan 1970 */ + CINIT(TIMEVALUE, LONG, 34), + + /* 35 = OBSOLETE */ + + /* Custom request, for customizing the get command like + HTTP: DELETE, TRACE and others + FTP: to use a different list command + */ + CINIT(CUSTOMREQUEST, STRINGPOINT, 36), + + /* FILE handle to use instead of stderr */ + CINIT(STDERR, OBJECTPOINT, 37), + + /* 38 is not used */ + + /* send linked-list of post-transfer QUOTE commands */ + CINIT(POSTQUOTE, OBJECTPOINT, 39), + + CINIT(OBSOLETE40, OBJECTPOINT, 40), /* OBSOLETE, do not use! */ + + CINIT(VERBOSE, LONG, 41), /* talk a lot */ + CINIT(HEADER, LONG, 42), /* throw the header out too */ + CINIT(NOPROGRESS, LONG, 43), /* shut off the progress meter */ + CINIT(NOBODY, LONG, 44), /* use HEAD to get http document */ + CINIT(FAILONERROR, LONG, 45), /* no output on http error codes >= 400 */ + CINIT(UPLOAD, LONG, 46), /* this is an upload */ + CINIT(POST, LONG, 47), /* HTTP POST method */ + CINIT(DIRLISTONLY, LONG, 48), /* bare names when listing directories */ + + CINIT(APPEND, LONG, 50), /* Append instead of overwrite on upload! */ + + /* Specify whether to read the user+password from the .netrc or the URL. + * This must be one of the CURL_NETRC_* enums below. */ + CINIT(NETRC, LONG, 51), + + CINIT(FOLLOWLOCATION, LONG, 52), /* use Location: Luke! */ + + CINIT(TRANSFERTEXT, LONG, 53), /* transfer data in text/ASCII format */ + CINIT(PUT, LONG, 54), /* HTTP PUT */ + + /* 55 = OBSOLETE */ + + /* DEPRECATED + * Function that will be called instead of the internal progress display + * function. This function should be defined as the curl_progress_callback + * prototype defines. */ + CINIT(PROGRESSFUNCTION, FUNCTIONPOINT, 56), + + /* Data passed to the CURLOPT_PROGRESSFUNCTION and CURLOPT_XFERINFOFUNCTION + callbacks */ + CINIT(PROGRESSDATA, OBJECTPOINT, 57), +#define CURLOPT_XFERINFODATA CURLOPT_PROGRESSDATA + + /* We want the referrer field set automatically when following locations */ + CINIT(AUTOREFERER, LONG, 58), + + /* Port of the proxy, can be set in the proxy string as well with: + "[host]:[port]" */ + CINIT(PROXYPORT, LONG, 59), + + /* size of the POST input data, if strlen() is not good to use */ + CINIT(POSTFIELDSIZE, LONG, 60), + + /* tunnel non-http operations through a HTTP proxy */ + CINIT(HTTPPROXYTUNNEL, LONG, 61), + + /* Set the interface string to use as outgoing network interface */ + CINIT(INTERFACE, STRINGPOINT, 62), + + /* Set the krb4/5 security level, this also enables krb4/5 awareness. This + * is a string, 'clear', 'safe', 'confidential' or 'private'. If the string + * is set but doesn't match one of these, 'private' will be used. */ + CINIT(KRBLEVEL, STRINGPOINT, 63), + + /* Set if we should verify the peer in ssl handshake, set 1 to verify. */ + CINIT(SSL_VERIFYPEER, LONG, 64), + + /* The CApath or CAfile used to validate the peer certificate + this option is used only if SSL_VERIFYPEER is true */ + CINIT(CAINFO, STRINGPOINT, 65), + + /* 66 = OBSOLETE */ + /* 67 = OBSOLETE */ + + /* Maximum number of http redirects to follow */ + CINIT(MAXREDIRS, LONG, 68), + + /* Pass a long set to 1 to get the date of the requested document (if + possible)! Pass a zero to shut it off. */ + CINIT(FILETIME, LONG, 69), + + /* This points to a linked list of telnet options */ + CINIT(TELNETOPTIONS, OBJECTPOINT, 70), + + /* Max amount of cached alive connections */ + CINIT(MAXCONNECTS, LONG, 71), + + CINIT(OBSOLETE72, LONG, 72), /* OBSOLETE, do not use! */ + + /* 73 = OBSOLETE */ + + /* Set to explicitly use a new connection for the upcoming transfer. + Do not use this unless you're absolutely sure of this, as it makes the + operation slower and is less friendly for the network. */ + CINIT(FRESH_CONNECT, LONG, 74), + + /* Set to explicitly forbid the upcoming transfer's connection to be re-used + when done. Do not use this unless you're absolutely sure of this, as it + makes the operation slower and is less friendly for the network. */ + CINIT(FORBID_REUSE, LONG, 75), + + /* Set to a file name that contains random data for libcurl to use to + seed the random engine when doing SSL connects. */ + CINIT(RANDOM_FILE, STRINGPOINT, 76), + + /* Set to the Entropy Gathering Daemon socket pathname */ + CINIT(EGDSOCKET, STRINGPOINT, 77), + + /* Time-out connect operations after this amount of seconds, if connects are + OK within this time, then fine... This only aborts the connect phase. */ + CINIT(CONNECTTIMEOUT, LONG, 78), + + /* Function that will be called to store headers (instead of fwrite). The + * parameters will use fwrite() syntax, make sure to follow them. */ + CINIT(HEADERFUNCTION, FUNCTIONPOINT, 79), + + /* Set this to force the HTTP request to get back to GET. Only really usable + if POST, PUT or a custom request have been used first. + */ + CINIT(HTTPGET, LONG, 80), + + /* Set if we should verify the Common name from the peer certificate in ssl + * handshake, set 1 to check existence, 2 to ensure that it matches the + * provided hostname. */ + CINIT(SSL_VERIFYHOST, LONG, 81), + + /* Specify which file name to write all known cookies in after completed + operation. Set file name to "-" (dash) to make it go to stdout. */ + CINIT(COOKIEJAR, STRINGPOINT, 82), + + /* Specify which SSL ciphers to use */ + CINIT(SSL_CIPHER_LIST, STRINGPOINT, 83), + + /* Specify which HTTP version to use! This must be set to one of the + CURL_HTTP_VERSION* enums set below. */ + CINIT(HTTP_VERSION, LONG, 84), + + /* Specifically switch on or off the FTP engine's use of the EPSV command. By + default, that one will always be attempted before the more traditional + PASV command. */ + CINIT(FTP_USE_EPSV, LONG, 85), + + /* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") */ + CINIT(SSLCERTTYPE, STRINGPOINT, 86), + + /* name of the file keeping your private SSL-key */ + CINIT(SSLKEY, STRINGPOINT, 87), + + /* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") */ + CINIT(SSLKEYTYPE, STRINGPOINT, 88), + + /* crypto engine for the SSL-sub system */ + CINIT(SSLENGINE, STRINGPOINT, 89), + + /* set the crypto engine for the SSL-sub system as default + the param has no meaning... + */ + CINIT(SSLENGINE_DEFAULT, LONG, 90), + + /* Non-zero value means to use the global dns cache */ + CINIT(DNS_USE_GLOBAL_CACHE, LONG, 91), /* DEPRECATED, do not use! */ + + /* DNS cache timeout */ + CINIT(DNS_CACHE_TIMEOUT, LONG, 92), + + /* send linked-list of pre-transfer QUOTE commands */ + CINIT(PREQUOTE, OBJECTPOINT, 93), + + /* set the debug function */ + CINIT(DEBUGFUNCTION, FUNCTIONPOINT, 94), + + /* set the data for the debug function */ + CINIT(DEBUGDATA, OBJECTPOINT, 95), + + /* mark this as start of a cookie session */ + CINIT(COOKIESESSION, LONG, 96), + + /* The CApath directory used to validate the peer certificate + this option is used only if SSL_VERIFYPEER is true */ + CINIT(CAPATH, STRINGPOINT, 97), + + /* Instruct libcurl to use a smaller receive buffer */ + CINIT(BUFFERSIZE, LONG, 98), + + /* Instruct libcurl to not use any signal/alarm handlers, even when using + timeouts. This option is useful for multi-threaded applications. + See libcurl-the-guide for more background information. */ + CINIT(NOSIGNAL, LONG, 99), + + /* Provide a CURLShare for mutexing non-ts data */ + CINIT(SHARE, OBJECTPOINT, 100), + + /* indicates type of proxy. accepted values are CURLPROXY_HTTP (default), + CURLPROXY_HTTPS, CURLPROXY_SOCKS4, CURLPROXY_SOCKS4A and + CURLPROXY_SOCKS5. */ + CINIT(PROXYTYPE, LONG, 101), + + /* Set the Accept-Encoding string. Use this to tell a server you would like + the response to be compressed. Before 7.21.6, this was known as + CURLOPT_ENCODING */ + CINIT(ACCEPT_ENCODING, STRINGPOINT, 102), + + /* Set pointer to private data */ + CINIT(PRIVATE, OBJECTPOINT, 103), + + /* Set aliases for HTTP 200 in the HTTP Response header */ + CINIT(HTTP200ALIASES, OBJECTPOINT, 104), + + /* Continue to send authentication (user+password) when following locations, + even when hostname changed. This can potentially send off the name + and password to whatever host the server decides. */ + CINIT(UNRESTRICTED_AUTH, LONG, 105), + + /* Specifically switch on or off the FTP engine's use of the EPRT command ( + it also disables the LPRT attempt). By default, those ones will always be + attempted before the good old traditional PORT command. */ + CINIT(FTP_USE_EPRT, LONG, 106), + + /* Set this to a bitmask value to enable the particular authentications + methods you like. Use this in combination with CURLOPT_USERPWD. + Note that setting multiple bits may cause extra network round-trips. */ + CINIT(HTTPAUTH, LONG, 107), + + /* Set the ssl context callback function, currently only for OpenSSL ssl_ctx + in second argument. The function must be matching the + curl_ssl_ctx_callback proto. */ + CINIT(SSL_CTX_FUNCTION, FUNCTIONPOINT, 108), + + /* Set the userdata for the ssl context callback function's third + argument */ + CINIT(SSL_CTX_DATA, OBJECTPOINT, 109), + + /* FTP Option that causes missing dirs to be created on the remote server. + In 7.19.4 we introduced the convenience enums for this option using the + CURLFTP_CREATE_DIR prefix. + */ + CINIT(FTP_CREATE_MISSING_DIRS, LONG, 110), + + /* Set this to a bitmask value to enable the particular authentications + methods you like. Use this in combination with CURLOPT_PROXYUSERPWD. + Note that setting multiple bits may cause extra network round-trips. */ + CINIT(PROXYAUTH, LONG, 111), + + /* FTP option that changes the timeout, in seconds, associated with + getting a response. This is different from transfer timeout time and + essentially places a demand on the FTP server to acknowledge commands + in a timely manner. */ + CINIT(FTP_RESPONSE_TIMEOUT, LONG, 112), +#define CURLOPT_SERVER_RESPONSE_TIMEOUT CURLOPT_FTP_RESPONSE_TIMEOUT + + /* Set this option to one of the CURL_IPRESOLVE_* defines (see below) to + tell libcurl to resolve names to those IP versions only. This only has + affect on systems with support for more than one, i.e IPv4 _and_ IPv6. */ + CINIT(IPRESOLVE, LONG, 113), + + /* Set this option to limit the size of a file that will be downloaded from + an HTTP or FTP server. + + Note there is also _LARGE version which adds large file support for + platforms which have larger off_t sizes. See MAXFILESIZE_LARGE below. */ + CINIT(MAXFILESIZE, LONG, 114), + + /* See the comment for INFILESIZE above, but in short, specifies + * the size of the file being uploaded. -1 means unknown. + */ + CINIT(INFILESIZE_LARGE, OFF_T, 115), + + /* Sets the continuation offset. There is also a LONG version of this; + * look above for RESUME_FROM. + */ + CINIT(RESUME_FROM_LARGE, OFF_T, 116), + + /* Sets the maximum size of data that will be downloaded from + * an HTTP or FTP server. See MAXFILESIZE above for the LONG version. + */ + CINIT(MAXFILESIZE_LARGE, OFF_T, 117), + + /* Set this option to the file name of your .netrc file you want libcurl + to parse (using the CURLOPT_NETRC option). If not set, libcurl will do + a poor attempt to find the user's home directory and check for a .netrc + file in there. */ + CINIT(NETRC_FILE, STRINGPOINT, 118), + + /* Enable SSL/TLS for FTP, pick one of: + CURLUSESSL_TRY - try using SSL, proceed anyway otherwise + CURLUSESSL_CONTROL - SSL for the control connection or fail + CURLUSESSL_ALL - SSL for all communication or fail + */ + CINIT(USE_SSL, LONG, 119), + + /* The _LARGE version of the standard POSTFIELDSIZE option */ + CINIT(POSTFIELDSIZE_LARGE, OFF_T, 120), + + /* Enable/disable the TCP Nagle algorithm */ + CINIT(TCP_NODELAY, LONG, 121), + + /* 122 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ + /* 123 OBSOLETE. Gone in 7.16.0 */ + /* 124 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ + /* 125 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ + /* 126 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ + /* 127 OBSOLETE. Gone in 7.16.0 */ + /* 128 OBSOLETE. Gone in 7.16.0 */ + + /* When FTP over SSL/TLS is selected (with CURLOPT_USE_SSL), this option + can be used to change libcurl's default action which is to first try + "AUTH SSL" and then "AUTH TLS" in this order, and proceed when a OK + response has been received. + + Available parameters are: + CURLFTPAUTH_DEFAULT - let libcurl decide + CURLFTPAUTH_SSL - try "AUTH SSL" first, then TLS + CURLFTPAUTH_TLS - try "AUTH TLS" first, then SSL + */ + CINIT(FTPSSLAUTH, LONG, 129), + + CINIT(IOCTLFUNCTION, FUNCTIONPOINT, 130), + CINIT(IOCTLDATA, OBJECTPOINT, 131), + + /* 132 OBSOLETE. Gone in 7.16.0 */ + /* 133 OBSOLETE. Gone in 7.16.0 */ + + /* zero terminated string for pass on to the FTP server when asked for + "account" info */ + CINIT(FTP_ACCOUNT, STRINGPOINT, 134), + + /* feed cookie into cookie engine */ + CINIT(COOKIELIST, STRINGPOINT, 135), + + /* ignore Content-Length */ + CINIT(IGNORE_CONTENT_LENGTH, LONG, 136), + + /* Set to non-zero to skip the IP address received in a 227 PASV FTP server + response. Typically used for FTP-SSL purposes but is not restricted to + that. libcurl will then instead use the same IP address it used for the + control connection. */ + CINIT(FTP_SKIP_PASV_IP, LONG, 137), + + /* Select "file method" to use when doing FTP, see the curl_ftpmethod + above. */ + CINIT(FTP_FILEMETHOD, LONG, 138), + + /* Local port number to bind the socket to */ + CINIT(LOCALPORT, LONG, 139), + + /* Number of ports to try, including the first one set with LOCALPORT. + Thus, setting it to 1 will make no additional attempts but the first. + */ + CINIT(LOCALPORTRANGE, LONG, 140), + + /* no transfer, set up connection and let application use the socket by + extracting it with CURLINFO_LASTSOCKET */ + CINIT(CONNECT_ONLY, LONG, 141), + + /* Function that will be called to convert from the + network encoding (instead of using the iconv calls in libcurl) */ + CINIT(CONV_FROM_NETWORK_FUNCTION, FUNCTIONPOINT, 142), + + /* Function that will be called to convert to the + network encoding (instead of using the iconv calls in libcurl) */ + CINIT(CONV_TO_NETWORK_FUNCTION, FUNCTIONPOINT, 143), + + /* Function that will be called to convert from UTF8 + (instead of using the iconv calls in libcurl) + Note that this is used only for SSL certificate processing */ + CINIT(CONV_FROM_UTF8_FUNCTION, FUNCTIONPOINT, 144), + + /* if the connection proceeds too quickly then need to slow it down */ + /* limit-rate: maximum number of bytes per second to send or receive */ + CINIT(MAX_SEND_SPEED_LARGE, OFF_T, 145), + CINIT(MAX_RECV_SPEED_LARGE, OFF_T, 146), + + /* Pointer to command string to send if USER/PASS fails. */ + CINIT(FTP_ALTERNATIVE_TO_USER, STRINGPOINT, 147), + + /* callback function for setting socket options */ + CINIT(SOCKOPTFUNCTION, FUNCTIONPOINT, 148), + CINIT(SOCKOPTDATA, OBJECTPOINT, 149), + + /* set to 0 to disable session ID re-use for this transfer, default is + enabled (== 1) */ + CINIT(SSL_SESSIONID_CACHE, LONG, 150), + + /* allowed SSH authentication methods */ + CINIT(SSH_AUTH_TYPES, LONG, 151), + + /* Used by scp/sftp to do public/private key authentication */ + CINIT(SSH_PUBLIC_KEYFILE, STRINGPOINT, 152), + CINIT(SSH_PRIVATE_KEYFILE, STRINGPOINT, 153), + + /* Send CCC (Clear Command Channel) after authentication */ + CINIT(FTP_SSL_CCC, LONG, 154), + + /* Same as TIMEOUT and CONNECTTIMEOUT, but with ms resolution */ + CINIT(TIMEOUT_MS, LONG, 155), + CINIT(CONNECTTIMEOUT_MS, LONG, 156), + + /* set to zero to disable the libcurl's decoding and thus pass the raw body + data to the application even when it is encoded/compressed */ + CINIT(HTTP_TRANSFER_DECODING, LONG, 157), + CINIT(HTTP_CONTENT_DECODING, LONG, 158), + + /* Permission used when creating new files and directories on the remote + server for protocols that support it, SFTP/SCP/FILE */ + CINIT(NEW_FILE_PERMS, LONG, 159), + CINIT(NEW_DIRECTORY_PERMS, LONG, 160), + + /* Set the behaviour of POST when redirecting. Values must be set to one + of CURL_REDIR* defines below. This used to be called CURLOPT_POST301 */ + CINIT(POSTREDIR, LONG, 161), + + /* used by scp/sftp to verify the host's public key */ + CINIT(SSH_HOST_PUBLIC_KEY_MD5, STRINGPOINT, 162), + + /* Callback function for opening socket (instead of socket(2)). Optionally, + callback is able change the address or refuse to connect returning + CURL_SOCKET_BAD. The callback should have type + curl_opensocket_callback */ + CINIT(OPENSOCKETFUNCTION, FUNCTIONPOINT, 163), + CINIT(OPENSOCKETDATA, OBJECTPOINT, 164), + + /* POST volatile input fields. */ + CINIT(COPYPOSTFIELDS, OBJECTPOINT, 165), + + /* set transfer mode (;type=) when doing FTP via an HTTP proxy */ + CINIT(PROXY_TRANSFER_MODE, LONG, 166), + + /* Callback function for seeking in the input stream */ + CINIT(SEEKFUNCTION, FUNCTIONPOINT, 167), + CINIT(SEEKDATA, OBJECTPOINT, 168), + + /* CRL file */ + CINIT(CRLFILE, STRINGPOINT, 169), + + /* Issuer certificate */ + CINIT(ISSUERCERT, STRINGPOINT, 170), + + /* (IPv6) Address scope */ + CINIT(ADDRESS_SCOPE, LONG, 171), + + /* Collect certificate chain info and allow it to get retrievable with + CURLINFO_CERTINFO after the transfer is complete. */ + CINIT(CERTINFO, LONG, 172), + + /* "name" and "pwd" to use when fetching. */ + CINIT(USERNAME, STRINGPOINT, 173), + CINIT(PASSWORD, STRINGPOINT, 174), + + /* "name" and "pwd" to use with Proxy when fetching. */ + CINIT(PROXYUSERNAME, STRINGPOINT, 175), + CINIT(PROXYPASSWORD, STRINGPOINT, 176), + + /* Comma separated list of hostnames defining no-proxy zones. These should + match both hostnames directly, and hostnames within a domain. For + example, local.com will match local.com and www.local.com, but NOT + notlocal.com or www.notlocal.com. For compatibility with other + implementations of this, .local.com will be considered to be the same as + local.com. A single * is the only valid wildcard, and effectively + disables the use of proxy. */ + CINIT(NOPROXY, STRINGPOINT, 177), + + /* block size for TFTP transfers */ + CINIT(TFTP_BLKSIZE, LONG, 178), + + /* Socks Service */ + CINIT(SOCKS5_GSSAPI_SERVICE, STRINGPOINT, 179), /* DEPRECATED, do not use! */ + + /* Socks Service */ + CINIT(SOCKS5_GSSAPI_NEC, LONG, 180), + + /* set the bitmask for the protocols that are allowed to be used for the + transfer, which thus helps the app which takes URLs from users or other + external inputs and want to restrict what protocol(s) to deal + with. Defaults to CURLPROTO_ALL. */ + CINIT(PROTOCOLS, LONG, 181), + + /* set the bitmask for the protocols that libcurl is allowed to follow to, + as a subset of the CURLOPT_PROTOCOLS ones. That means the protocol needs + to be set in both bitmasks to be allowed to get redirected to. Defaults + to all protocols except FILE and SCP. */ + CINIT(REDIR_PROTOCOLS, LONG, 182), + + /* set the SSH knownhost file name to use */ + CINIT(SSH_KNOWNHOSTS, STRINGPOINT, 183), + + /* set the SSH host key callback, must point to a curl_sshkeycallback + function */ + CINIT(SSH_KEYFUNCTION, FUNCTIONPOINT, 184), + + /* set the SSH host key callback custom pointer */ + CINIT(SSH_KEYDATA, OBJECTPOINT, 185), + + /* set the SMTP mail originator */ + CINIT(MAIL_FROM, STRINGPOINT, 186), + + /* set the list of SMTP mail receiver(s) */ + CINIT(MAIL_RCPT, OBJECTPOINT, 187), + + /* FTP: send PRET before PASV */ + CINIT(FTP_USE_PRET, LONG, 188), + + /* RTSP request method (OPTIONS, SETUP, PLAY, etc...) */ + CINIT(RTSP_REQUEST, LONG, 189), + + /* The RTSP session identifier */ + CINIT(RTSP_SESSION_ID, STRINGPOINT, 190), + + /* The RTSP stream URI */ + CINIT(RTSP_STREAM_URI, STRINGPOINT, 191), + + /* The Transport: header to use in RTSP requests */ + CINIT(RTSP_TRANSPORT, STRINGPOINT, 192), + + /* Manually initialize the client RTSP CSeq for this handle */ + CINIT(RTSP_CLIENT_CSEQ, LONG, 193), + + /* Manually initialize the server RTSP CSeq for this handle */ + CINIT(RTSP_SERVER_CSEQ, LONG, 194), + + /* The stream to pass to INTERLEAVEFUNCTION. */ + CINIT(INTERLEAVEDATA, OBJECTPOINT, 195), + + /* Let the application define a custom write method for RTP data */ + CINIT(INTERLEAVEFUNCTION, FUNCTIONPOINT, 196), + + /* Turn on wildcard matching */ + CINIT(WILDCARDMATCH, LONG, 197), + + /* Directory matching callback called before downloading of an + individual file (chunk) started */ + CINIT(CHUNK_BGN_FUNCTION, FUNCTIONPOINT, 198), + + /* Directory matching callback called after the file (chunk) + was downloaded, or skipped */ + CINIT(CHUNK_END_FUNCTION, FUNCTIONPOINT, 199), + + /* Change match (fnmatch-like) callback for wildcard matching */ + CINIT(FNMATCH_FUNCTION, FUNCTIONPOINT, 200), + + /* Let the application define custom chunk data pointer */ + CINIT(CHUNK_DATA, OBJECTPOINT, 201), + + /* FNMATCH_FUNCTION user pointer */ + CINIT(FNMATCH_DATA, OBJECTPOINT, 202), + + /* send linked-list of name:port:address sets */ + CINIT(RESOLVE, OBJECTPOINT, 203), + + /* Set a username for authenticated TLS */ + CINIT(TLSAUTH_USERNAME, STRINGPOINT, 204), + + /* Set a password for authenticated TLS */ + CINIT(TLSAUTH_PASSWORD, STRINGPOINT, 205), + + /* Set authentication type for authenticated TLS */ + CINIT(TLSAUTH_TYPE, STRINGPOINT, 206), + + /* Set to 1 to enable the "TE:" header in HTTP requests to ask for + compressed transfer-encoded responses. Set to 0 to disable the use of TE: + in outgoing requests. The current default is 0, but it might change in a + future libcurl release. + + libcurl will ask for the compressed methods it knows of, and if that + isn't any, it will not ask for transfer-encoding at all even if this + option is set to 1. + + */ + CINIT(TRANSFER_ENCODING, LONG, 207), + + /* Callback function for closing socket (instead of close(2)). The callback + should have type curl_closesocket_callback */ + CINIT(CLOSESOCKETFUNCTION, FUNCTIONPOINT, 208), + CINIT(CLOSESOCKETDATA, OBJECTPOINT, 209), + + /* allow GSSAPI credential delegation */ + CINIT(GSSAPI_DELEGATION, LONG, 210), + + /* Set the name servers to use for DNS resolution */ + CINIT(DNS_SERVERS, STRINGPOINT, 211), + + /* Time-out accept operations (currently for FTP only) after this amount + of miliseconds. */ + CINIT(ACCEPTTIMEOUT_MS, LONG, 212), + + /* Set TCP keepalive */ + CINIT(TCP_KEEPALIVE, LONG, 213), + + /* non-universal keepalive knobs (Linux, AIX, HP-UX, more) */ + CINIT(TCP_KEEPIDLE, LONG, 214), + CINIT(TCP_KEEPINTVL, LONG, 215), + + /* Enable/disable specific SSL features with a bitmask, see CURLSSLOPT_* */ + CINIT(SSL_OPTIONS, LONG, 216), + + /* Set the SMTP auth originator */ + CINIT(MAIL_AUTH, STRINGPOINT, 217), + + /* Enable/disable SASL initial response */ + CINIT(SASL_IR, LONG, 218), + + /* Function that will be called instead of the internal progress display + * function. This function should be defined as the curl_xferinfo_callback + * prototype defines. (Deprecates CURLOPT_PROGRESSFUNCTION) */ + CINIT(XFERINFOFUNCTION, FUNCTIONPOINT, 219), + + /* The XOAUTH2 bearer token */ + CINIT(XOAUTH2_BEARER, STRINGPOINT, 220), + + /* Set the interface string to use as outgoing network + * interface for DNS requests. + * Only supported by the c-ares DNS backend */ + CINIT(DNS_INTERFACE, STRINGPOINT, 221), + + /* Set the local IPv4 address to use for outgoing DNS requests. + * Only supported by the c-ares DNS backend */ + CINIT(DNS_LOCAL_IP4, STRINGPOINT, 222), + + /* Set the local IPv4 address to use for outgoing DNS requests. + * Only supported by the c-ares DNS backend */ + CINIT(DNS_LOCAL_IP6, STRINGPOINT, 223), + + /* Set authentication options directly */ + CINIT(LOGIN_OPTIONS, STRINGPOINT, 224), + + /* Enable/disable TLS NPN extension (http2 over ssl might fail without) */ + CINIT(SSL_ENABLE_NPN, LONG, 225), + + /* Enable/disable TLS ALPN extension (http2 over ssl might fail without) */ + CINIT(SSL_ENABLE_ALPN, LONG, 226), + + /* Time to wait for a response to a HTTP request containing an + * Expect: 100-continue header before sending the data anyway. */ + CINIT(EXPECT_100_TIMEOUT_MS, LONG, 227), + + /* This points to a linked list of headers used for proxy requests only, + struct curl_slist kind */ + CINIT(PROXYHEADER, OBJECTPOINT, 228), + + /* Pass in a bitmask of "header options" */ + CINIT(HEADEROPT, LONG, 229), + + /* The public key in DER form used to validate the peer public key + this option is used only if SSL_VERIFYPEER is true */ + CINIT(PINNEDPUBLICKEY, STRINGPOINT, 230), + + /* Path to Unix domain socket */ + CINIT(UNIX_SOCKET_PATH, STRINGPOINT, 231), + + /* Set if we should verify the certificate status. */ + CINIT(SSL_VERIFYSTATUS, LONG, 232), + + /* Set if we should enable TLS false start. */ + CINIT(SSL_FALSESTART, LONG, 233), + + /* Do not squash dot-dot sequences */ + CINIT(PATH_AS_IS, LONG, 234), + + /* Proxy Service Name */ + CINIT(PROXY_SERVICE_NAME, STRINGPOINT, 235), + + /* Service Name */ + CINIT(SERVICE_NAME, STRINGPOINT, 236), + + /* Wait/don't wait for pipe/mutex to clarify */ + CINIT(PIPEWAIT, LONG, 237), + + /* Set the protocol used when curl is given a URL without a protocol */ + CINIT(DEFAULT_PROTOCOL, STRINGPOINT, 238), + + /* Set stream weight, 1 - 256 (default is 16) */ + CINIT(STREAM_WEIGHT, LONG, 239), + + /* Set stream dependency on another CURL handle */ + CINIT(STREAM_DEPENDS, OBJECTPOINT, 240), + + /* Set E-xclusive stream dependency on another CURL handle */ + CINIT(STREAM_DEPENDS_E, OBJECTPOINT, 241), + + /* Do not send any tftp option requests to the server */ + CINIT(TFTP_NO_OPTIONS, LONG, 242), + + /* Linked-list of host:port:connect-to-host:connect-to-port, + overrides the URL's host:port (only for the network layer) */ + CINIT(CONNECT_TO, OBJECTPOINT, 243), + + /* Set TCP Fast Open */ + CINIT(TCP_FASTOPEN, LONG, 244), + + /* Continue to send data if the server responds early with an + * HTTP status code >= 300 */ + CINIT(KEEP_SENDING_ON_ERROR, LONG, 245), + + /* The CApath or CAfile used to validate the proxy certificate + this option is used only if PROXY_SSL_VERIFYPEER is true */ + CINIT(PROXY_CAINFO, STRINGPOINT, 246), + + /* The CApath directory used to validate the proxy certificate + this option is used only if PROXY_SSL_VERIFYPEER is true */ + CINIT(PROXY_CAPATH, STRINGPOINT, 247), + + /* Set if we should verify the proxy in ssl handshake, + set 1 to verify. */ + CINIT(PROXY_SSL_VERIFYPEER, LONG, 248), + + /* Set if we should verify the Common name from the proxy certificate in ssl + * handshake, set 1 to check existence, 2 to ensure that it matches + * the provided hostname. */ + CINIT(PROXY_SSL_VERIFYHOST, LONG, 249), + + /* What version to specifically try to use for proxy. + See CURL_SSLVERSION defines below. */ + CINIT(PROXY_SSLVERSION, LONG, 250), + + /* Set a username for authenticated TLS for proxy */ + CINIT(PROXY_TLSAUTH_USERNAME, STRINGPOINT, 251), + + /* Set a password for authenticated TLS for proxy */ + CINIT(PROXY_TLSAUTH_PASSWORD, STRINGPOINT, 252), + + /* Set authentication type for authenticated TLS for proxy */ + CINIT(PROXY_TLSAUTH_TYPE, STRINGPOINT, 253), + + /* name of the file keeping your private SSL-certificate for proxy */ + CINIT(PROXY_SSLCERT, STRINGPOINT, 254), + + /* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") for + proxy */ + CINIT(PROXY_SSLCERTTYPE, STRINGPOINT, 255), + + /* name of the file keeping your private SSL-key for proxy */ + CINIT(PROXY_SSLKEY, STRINGPOINT, 256), + + /* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") for + proxy */ + CINIT(PROXY_SSLKEYTYPE, STRINGPOINT, 257), + + /* password for the SSL private key for proxy */ + CINIT(PROXY_KEYPASSWD, STRINGPOINT, 258), + + /* Specify which SSL ciphers to use for proxy */ + CINIT(PROXY_SSL_CIPHER_LIST, STRINGPOINT, 259), + + /* CRL file for proxy */ + CINIT(PROXY_CRLFILE, STRINGPOINT, 260), + + /* Enable/disable specific SSL features with a bitmask for proxy, see + CURLSSLOPT_* */ + CINIT(PROXY_SSL_OPTIONS, LONG, 261), + + /* Name of pre proxy to use. */ + CINIT(PRE_PROXY, STRINGPOINT, 262), + + /* The public key in DER form used to validate the proxy public key + this option is used only if PROXY_SSL_VERIFYPEER is true */ + CINIT(PROXY_PINNEDPUBLICKEY, STRINGPOINT, 263), + + CURLOPT_LASTENTRY /* the last unused */ +} CURLoption; + +#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all + the obsolete stuff removed! */ + +/* Backwards compatibility with older names */ +/* These are scheduled to disappear by 2011 */ + +/* This was added in version 7.19.1 */ +#define CURLOPT_POST301 CURLOPT_POSTREDIR + +/* These are scheduled to disappear by 2009 */ + +/* The following were added in 7.17.0 */ +#define CURLOPT_SSLKEYPASSWD CURLOPT_KEYPASSWD +#define CURLOPT_FTPAPPEND CURLOPT_APPEND +#define CURLOPT_FTPLISTONLY CURLOPT_DIRLISTONLY +#define CURLOPT_FTP_SSL CURLOPT_USE_SSL + +/* The following were added earlier */ + +#define CURLOPT_SSLCERTPASSWD CURLOPT_KEYPASSWD +#define CURLOPT_KRB4LEVEL CURLOPT_KRBLEVEL + +#else +/* This is set if CURL_NO_OLDIES is defined at compile-time */ +#undef CURLOPT_DNS_USE_GLOBAL_CACHE /* soon obsolete */ +#endif + + + /* Below here follows defines for the CURLOPT_IPRESOLVE option. If a host + name resolves addresses using more than one IP protocol version, this + option might be handy to force libcurl to use a specific IP version. */ +#define CURL_IPRESOLVE_WHATEVER 0 /* default, resolves addresses to all IP + versions that your system allows */ +#define CURL_IPRESOLVE_V4 1 /* resolve to IPv4 addresses */ +#define CURL_IPRESOLVE_V6 2 /* resolve to IPv6 addresses */ + + /* three convenient "aliases" that follow the name scheme better */ +#define CURLOPT_RTSPHEADER CURLOPT_HTTPHEADER + + /* These enums are for use with the CURLOPT_HTTP_VERSION option. */ +enum { + CURL_HTTP_VERSION_NONE, /* setting this means we don't care, and that we'd + like the library to choose the best possible + for us! */ + CURL_HTTP_VERSION_1_0, /* please use HTTP 1.0 in the request */ + CURL_HTTP_VERSION_1_1, /* please use HTTP 1.1 in the request */ + CURL_HTTP_VERSION_2_0, /* please use HTTP 2 in the request */ + CURL_HTTP_VERSION_2TLS, /* use version 2 for HTTPS, version 1.1 for HTTP */ + CURL_HTTP_VERSION_2_PRIOR_KNOWLEDGE, /* please use HTTP 2 without HTTP/1.1 + Upgrade */ + + CURL_HTTP_VERSION_LAST /* *ILLEGAL* http version */ +}; + +/* Convenience definition simple because the name of the version is HTTP/2 and + not 2.0. The 2_0 version of the enum name was set while the version was + still planned to be 2.0 and we stick to it for compatibility. */ +#define CURL_HTTP_VERSION_2 CURL_HTTP_VERSION_2_0 + +/* + * Public API enums for RTSP requests + */ +enum { + CURL_RTSPREQ_NONE, /* first in list */ + CURL_RTSPREQ_OPTIONS, + CURL_RTSPREQ_DESCRIBE, + CURL_RTSPREQ_ANNOUNCE, + CURL_RTSPREQ_SETUP, + CURL_RTSPREQ_PLAY, + CURL_RTSPREQ_PAUSE, + CURL_RTSPREQ_TEARDOWN, + CURL_RTSPREQ_GET_PARAMETER, + CURL_RTSPREQ_SET_PARAMETER, + CURL_RTSPREQ_RECORD, + CURL_RTSPREQ_RECEIVE, + CURL_RTSPREQ_LAST /* last in list */ +}; + + /* These enums are for use with the CURLOPT_NETRC option. */ +enum CURL_NETRC_OPTION { + CURL_NETRC_IGNORED, /* The .netrc will never be read. + * This is the default. */ + CURL_NETRC_OPTIONAL, /* A user:password in the URL will be preferred + * to one in the .netrc. */ + CURL_NETRC_REQUIRED, /* A user:password in the URL will be ignored. + * Unless one is set programmatically, the .netrc + * will be queried. */ + CURL_NETRC_LAST +}; + +enum { + CURL_SSLVERSION_DEFAULT, + CURL_SSLVERSION_TLSv1, /* TLS 1.x */ + CURL_SSLVERSION_SSLv2, + CURL_SSLVERSION_SSLv3, + CURL_SSLVERSION_TLSv1_0, + CURL_SSLVERSION_TLSv1_1, + CURL_SSLVERSION_TLSv1_2, + CURL_SSLVERSION_TLSv1_3, + + CURL_SSLVERSION_LAST /* never use, keep last */ +}; + +enum CURL_TLSAUTH { + CURL_TLSAUTH_NONE, + CURL_TLSAUTH_SRP, + CURL_TLSAUTH_LAST /* never use, keep last */ +}; + +/* symbols to use with CURLOPT_POSTREDIR. + CURL_REDIR_POST_301, CURL_REDIR_POST_302 and CURL_REDIR_POST_303 + can be bitwise ORed so that CURL_REDIR_POST_301 | CURL_REDIR_POST_302 + | CURL_REDIR_POST_303 == CURL_REDIR_POST_ALL */ + +#define CURL_REDIR_GET_ALL 0 +#define CURL_REDIR_POST_301 1 +#define CURL_REDIR_POST_302 2 +#define CURL_REDIR_POST_303 4 +#define CURL_REDIR_POST_ALL \ + (CURL_REDIR_POST_301|CURL_REDIR_POST_302|CURL_REDIR_POST_303) + +typedef enum { + CURL_TIMECOND_NONE, + + CURL_TIMECOND_IFMODSINCE, + CURL_TIMECOND_IFUNMODSINCE, + CURL_TIMECOND_LASTMOD, + + CURL_TIMECOND_LAST +} curl_TimeCond; + + +/* curl_strequal() and curl_strnequal() are subject for removal in a future + libcurl, see lib/README.curlx for details + + !checksrc! disable SPACEBEFOREPAREN 2 +*/ +CURL_EXTERN int (curl_strequal)(const char *s1, const char *s2); +CURL_EXTERN int (curl_strnequal)(const char *s1, const char *s2, size_t n); + +/* name is uppercase CURLFORM_ */ +#ifdef CFINIT +#undef CFINIT +#endif + +#ifdef CURL_ISOCPP +#define CFINIT(name) CURLFORM_ ## name +#else +/* The macro "##" is ISO C, we assume pre-ISO C doesn't support it. */ +#define CFINIT(name) CURLFORM_/**/name +#endif + +typedef enum { + CFINIT(NOTHING), /********* the first one is unused ************/ + + /* */ + CFINIT(COPYNAME), + CFINIT(PTRNAME), + CFINIT(NAMELENGTH), + CFINIT(COPYCONTENTS), + CFINIT(PTRCONTENTS), + CFINIT(CONTENTSLENGTH), + CFINIT(FILECONTENT), + CFINIT(ARRAY), + CFINIT(OBSOLETE), + CFINIT(FILE), + + CFINIT(BUFFER), + CFINIT(BUFFERPTR), + CFINIT(BUFFERLENGTH), + + CFINIT(CONTENTTYPE), + CFINIT(CONTENTHEADER), + CFINIT(FILENAME), + CFINIT(END), + CFINIT(OBSOLETE2), + + CFINIT(STREAM), + CFINIT(CONTENTLEN), /* added in 7.46.0, provide a curl_off_t length */ + + CURLFORM_LASTENTRY /* the last unused */ +} CURLformoption; + +#undef CFINIT /* done */ + +/* structure to be used as parameter for CURLFORM_ARRAY */ +struct curl_forms { + CURLformoption option; + const char *value; +}; + +/* use this for multipart formpost building */ +/* Returns code for curl_formadd() + * + * Returns: + * CURL_FORMADD_OK on success + * CURL_FORMADD_MEMORY if the FormInfo allocation fails + * CURL_FORMADD_OPTION_TWICE if one option is given twice for one Form + * CURL_FORMADD_NULL if a null pointer was given for a char + * CURL_FORMADD_MEMORY if the allocation of a FormInfo struct failed + * CURL_FORMADD_UNKNOWN_OPTION if an unknown option was used + * CURL_FORMADD_INCOMPLETE if the some FormInfo is not complete (or error) + * CURL_FORMADD_MEMORY if a curl_httppost struct cannot be allocated + * CURL_FORMADD_MEMORY if some allocation for string copying failed. + * CURL_FORMADD_ILLEGAL_ARRAY if an illegal option is used in an array + * + ***************************************************************************/ +typedef enum { + CURL_FORMADD_OK, /* first, no error */ + + CURL_FORMADD_MEMORY, + CURL_FORMADD_OPTION_TWICE, + CURL_FORMADD_NULL, + CURL_FORMADD_UNKNOWN_OPTION, + CURL_FORMADD_INCOMPLETE, + CURL_FORMADD_ILLEGAL_ARRAY, + CURL_FORMADD_DISABLED, /* libcurl was built with this disabled */ + + CURL_FORMADD_LAST /* last */ +} CURLFORMcode; + +/* + * NAME curl_formadd() + * + * DESCRIPTION + * + * Pretty advanced function for building multi-part formposts. Each invoke + * adds one part that together construct a full post. Then use + * CURLOPT_HTTPPOST to send it off to libcurl. + */ +CURL_EXTERN CURLFORMcode curl_formadd(struct curl_httppost **httppost, + struct curl_httppost **last_post, + ...); + +/* + * callback function for curl_formget() + * The void *arg pointer will be the one passed as second argument to + * curl_formget(). + * The character buffer passed to it must not be freed. + * Should return the buffer length passed to it as the argument "len" on + * success. + */ +typedef size_t (*curl_formget_callback)(void *arg, const char *buf, + size_t len); + +/* + * NAME curl_formget() + * + * DESCRIPTION + * + * Serialize a curl_httppost struct built with curl_formadd(). + * Accepts a void pointer as second argument which will be passed to + * the curl_formget_callback function. + * Returns 0 on success. + */ +CURL_EXTERN int curl_formget(struct curl_httppost *form, void *arg, + curl_formget_callback append); +/* + * NAME curl_formfree() + * + * DESCRIPTION + * + * Free a multipart formpost previously built with curl_formadd(). + */ +CURL_EXTERN void curl_formfree(struct curl_httppost *form); + +/* + * NAME curl_getenv() + * + * DESCRIPTION + * + * Returns a malloc()'ed string that MUST be curl_free()ed after usage is + * complete. DEPRECATED - see lib/README.curlx + */ +CURL_EXTERN char *curl_getenv(const char *variable); + +/* + * NAME curl_version() + * + * DESCRIPTION + * + * Returns a static ascii string of the libcurl version. + */ +CURL_EXTERN char *curl_version(void); + +/* + * NAME curl_easy_escape() + * + * DESCRIPTION + * + * Escapes URL strings (converts all letters consider illegal in URLs to their + * %XX versions). This function returns a new allocated string or NULL if an + * error occurred. + */ +CURL_EXTERN char *curl_easy_escape(CURL *handle, + const char *string, + int length); + +/* the previous version: */ +CURL_EXTERN char *curl_escape(const char *string, + int length); + + +/* + * NAME curl_easy_unescape() + * + * DESCRIPTION + * + * Unescapes URL encoding in strings (converts all %XX codes to their 8bit + * versions). This function returns a new allocated string or NULL if an error + * occurred. + * Conversion Note: On non-ASCII platforms the ASCII %XX codes are + * converted into the host encoding. + */ +CURL_EXTERN char *curl_easy_unescape(CURL *handle, + const char *string, + int length, + int *outlength); + +/* the previous version */ +CURL_EXTERN char *curl_unescape(const char *string, + int length); + +/* + * NAME curl_free() + * + * DESCRIPTION + * + * Provided for de-allocation in the same translation unit that did the + * allocation. Added in libcurl 7.10 + */ +CURL_EXTERN void curl_free(void *p); + +/* + * NAME curl_global_init() + * + * DESCRIPTION + * + * curl_global_init() should be invoked exactly once for each application that + * uses libcurl and before any call of other libcurl functions. + * + * This function is not thread-safe! + */ +CURL_EXTERN CURLcode curl_global_init(long flags); + +/* + * NAME curl_global_init_mem() + * + * DESCRIPTION + * + * curl_global_init() or curl_global_init_mem() should be invoked exactly once + * for each application that uses libcurl. This function can be used to + * initialize libcurl and set user defined memory management callback + * functions. Users can implement memory management routines to check for + * memory leaks, check for mis-use of the curl library etc. User registered + * callback routines with be invoked by this library instead of the system + * memory management routines like malloc, free etc. + */ +CURL_EXTERN CURLcode curl_global_init_mem(long flags, + curl_malloc_callback m, + curl_free_callback f, + curl_realloc_callback r, + curl_strdup_callback s, + curl_calloc_callback c); + +/* + * NAME curl_global_cleanup() + * + * DESCRIPTION + * + * curl_global_cleanup() should be invoked exactly once for each application + * that uses libcurl + */ +CURL_EXTERN void curl_global_cleanup(void); + +/* linked-list structure for the CURLOPT_QUOTE option (and other) */ +struct curl_slist { + char *data; + struct curl_slist *next; +}; + +/* + * NAME curl_slist_append() + * + * DESCRIPTION + * + * Appends a string to a linked list. If no list exists, it will be created + * first. Returns the new list, after appending. + */ +CURL_EXTERN struct curl_slist *curl_slist_append(struct curl_slist *, + const char *); + +/* + * NAME curl_slist_free_all() + * + * DESCRIPTION + * + * free a previously built curl_slist. + */ +CURL_EXTERN void curl_slist_free_all(struct curl_slist *); + +/* + * NAME curl_getdate() + * + * DESCRIPTION + * + * Returns the time, in seconds since 1 Jan 1970 of the time string given in + * the first argument. The time argument in the second parameter is unused + * and should be set to NULL. + */ +CURL_EXTERN time_t curl_getdate(const char *p, const time_t *unused); + +/* info about the certificate chain, only for OpenSSL builds. Asked + for with CURLOPT_CERTINFO / CURLINFO_CERTINFO */ +struct curl_certinfo { + int num_of_certs; /* number of certificates with information */ + struct curl_slist **certinfo; /* for each index in this array, there's a + linked list with textual information in the + format "name: value" */ +}; + +/* enum for the different supported SSL backends */ +typedef enum { + CURLSSLBACKEND_NONE = 0, + CURLSSLBACKEND_OPENSSL = 1, + CURLSSLBACKEND_GNUTLS = 2, + CURLSSLBACKEND_NSS = 3, + CURLSSLBACKEND_OBSOLETE4 = 4, /* Was QSOSSL. */ + CURLSSLBACKEND_GSKIT = 5, + CURLSSLBACKEND_POLARSSL = 6, + CURLSSLBACKEND_CYASSL = 7, + CURLSSLBACKEND_SCHANNEL = 8, + CURLSSLBACKEND_DARWINSSL = 9, + CURLSSLBACKEND_AXTLS = 10, + CURLSSLBACKEND_MBEDTLS = 11 +} curl_sslbackend; + +/* aliases for library clones and renames */ +#define CURLSSLBACKEND_LIBRESSL 1 +#define CURLSSLBACKEND_BORINGSSL 1 +#define CURLSSLBACKEND_WOLFSSL 6 + +/* Information about the SSL library used and the respective internal SSL + handle, which can be used to obtain further information regarding the + connection. Asked for with CURLINFO_TLS_SSL_PTR or CURLINFO_TLS_SESSION. */ +struct curl_tlssessioninfo { + curl_sslbackend backend; + void *internals; +}; + +#define CURLINFO_STRING 0x100000 +#define CURLINFO_LONG 0x200000 +#define CURLINFO_DOUBLE 0x300000 +#define CURLINFO_SLIST 0x400000 +#define CURLINFO_SOCKET 0x500000 +#define CURLINFO_MASK 0x0fffff +#define CURLINFO_TYPEMASK 0xf00000 + +typedef enum { + CURLINFO_NONE, /* first, never use this */ + CURLINFO_EFFECTIVE_URL = CURLINFO_STRING + 1, + CURLINFO_RESPONSE_CODE = CURLINFO_LONG + 2, + CURLINFO_TOTAL_TIME = CURLINFO_DOUBLE + 3, + CURLINFO_NAMELOOKUP_TIME = CURLINFO_DOUBLE + 4, + CURLINFO_CONNECT_TIME = CURLINFO_DOUBLE + 5, + CURLINFO_PRETRANSFER_TIME = CURLINFO_DOUBLE + 6, + CURLINFO_SIZE_UPLOAD = CURLINFO_DOUBLE + 7, + CURLINFO_SIZE_DOWNLOAD = CURLINFO_DOUBLE + 8, + CURLINFO_SPEED_DOWNLOAD = CURLINFO_DOUBLE + 9, + CURLINFO_SPEED_UPLOAD = CURLINFO_DOUBLE + 10, + CURLINFO_HEADER_SIZE = CURLINFO_LONG + 11, + CURLINFO_REQUEST_SIZE = CURLINFO_LONG + 12, + CURLINFO_SSL_VERIFYRESULT = CURLINFO_LONG + 13, + CURLINFO_FILETIME = CURLINFO_LONG + 14, + CURLINFO_CONTENT_LENGTH_DOWNLOAD = CURLINFO_DOUBLE + 15, + CURLINFO_CONTENT_LENGTH_UPLOAD = CURLINFO_DOUBLE + 16, + CURLINFO_STARTTRANSFER_TIME = CURLINFO_DOUBLE + 17, + CURLINFO_CONTENT_TYPE = CURLINFO_STRING + 18, + CURLINFO_REDIRECT_TIME = CURLINFO_DOUBLE + 19, + CURLINFO_REDIRECT_COUNT = CURLINFO_LONG + 20, + CURLINFO_PRIVATE = CURLINFO_STRING + 21, + CURLINFO_HTTP_CONNECTCODE = CURLINFO_LONG + 22, + CURLINFO_HTTPAUTH_AVAIL = CURLINFO_LONG + 23, + CURLINFO_PROXYAUTH_AVAIL = CURLINFO_LONG + 24, + CURLINFO_OS_ERRNO = CURLINFO_LONG + 25, + CURLINFO_NUM_CONNECTS = CURLINFO_LONG + 26, + CURLINFO_SSL_ENGINES = CURLINFO_SLIST + 27, + CURLINFO_COOKIELIST = CURLINFO_SLIST + 28, + CURLINFO_LASTSOCKET = CURLINFO_LONG + 29, + CURLINFO_FTP_ENTRY_PATH = CURLINFO_STRING + 30, + CURLINFO_REDIRECT_URL = CURLINFO_STRING + 31, + CURLINFO_PRIMARY_IP = CURLINFO_STRING + 32, + CURLINFO_APPCONNECT_TIME = CURLINFO_DOUBLE + 33, + CURLINFO_CERTINFO = CURLINFO_SLIST + 34, + CURLINFO_CONDITION_UNMET = CURLINFO_LONG + 35, + CURLINFO_RTSP_SESSION_ID = CURLINFO_STRING + 36, + CURLINFO_RTSP_CLIENT_CSEQ = CURLINFO_LONG + 37, + CURLINFO_RTSP_SERVER_CSEQ = CURLINFO_LONG + 38, + CURLINFO_RTSP_CSEQ_RECV = CURLINFO_LONG + 39, + CURLINFO_PRIMARY_PORT = CURLINFO_LONG + 40, + CURLINFO_LOCAL_IP = CURLINFO_STRING + 41, + CURLINFO_LOCAL_PORT = CURLINFO_LONG + 42, + CURLINFO_TLS_SESSION = CURLINFO_SLIST + 43, + CURLINFO_ACTIVESOCKET = CURLINFO_SOCKET + 44, + CURLINFO_TLS_SSL_PTR = CURLINFO_SLIST + 45, + CURLINFO_HTTP_VERSION = CURLINFO_LONG + 46, + CURLINFO_PROXY_SSL_VERIFYRESULT = CURLINFO_LONG + 47, + CURLINFO_PROTOCOL = CURLINFO_LONG + 48, + CURLINFO_SCHEME = CURLINFO_STRING + 49, + /* Fill in new entries below here! */ + + CURLINFO_LASTONE = 49 +} CURLINFO; + +/* CURLINFO_RESPONSE_CODE is the new name for the option previously known as + CURLINFO_HTTP_CODE */ +#define CURLINFO_HTTP_CODE CURLINFO_RESPONSE_CODE + +typedef enum { + CURLCLOSEPOLICY_NONE, /* first, never use this */ + + CURLCLOSEPOLICY_OLDEST, + CURLCLOSEPOLICY_LEAST_RECENTLY_USED, + CURLCLOSEPOLICY_LEAST_TRAFFIC, + CURLCLOSEPOLICY_SLOWEST, + CURLCLOSEPOLICY_CALLBACK, + + CURLCLOSEPOLICY_LAST /* last, never use this */ +} curl_closepolicy; + +#define CURL_GLOBAL_SSL (1<<0) +#define CURL_GLOBAL_WIN32 (1<<1) +#define CURL_GLOBAL_ALL (CURL_GLOBAL_SSL|CURL_GLOBAL_WIN32) +#define CURL_GLOBAL_NOTHING 0 +#define CURL_GLOBAL_DEFAULT CURL_GLOBAL_ALL +#define CURL_GLOBAL_ACK_EINTR (1<<2) + + +/***************************************************************************** + * Setup defines, protos etc for the sharing stuff. + */ + +/* Different data locks for a single share */ +typedef enum { + CURL_LOCK_DATA_NONE = 0, + /* CURL_LOCK_DATA_SHARE is used internally to say that + * the locking is just made to change the internal state of the share + * itself. + */ + CURL_LOCK_DATA_SHARE, + CURL_LOCK_DATA_COOKIE, + CURL_LOCK_DATA_DNS, + CURL_LOCK_DATA_SSL_SESSION, + CURL_LOCK_DATA_CONNECT, + CURL_LOCK_DATA_LAST +} curl_lock_data; + +/* Different lock access types */ +typedef enum { + CURL_LOCK_ACCESS_NONE = 0, /* unspecified action */ + CURL_LOCK_ACCESS_SHARED = 1, /* for read perhaps */ + CURL_LOCK_ACCESS_SINGLE = 2, /* for write perhaps */ + CURL_LOCK_ACCESS_LAST /* never use */ +} curl_lock_access; + +typedef void (*curl_lock_function)(CURL *handle, + curl_lock_data data, + curl_lock_access locktype, + void *userptr); +typedef void (*curl_unlock_function)(CURL *handle, + curl_lock_data data, + void *userptr); + + +typedef enum { + CURLSHE_OK, /* all is fine */ + CURLSHE_BAD_OPTION, /* 1 */ + CURLSHE_IN_USE, /* 2 */ + CURLSHE_INVALID, /* 3 */ + CURLSHE_NOMEM, /* 4 out of memory */ + CURLSHE_NOT_BUILT_IN, /* 5 feature not present in lib */ + CURLSHE_LAST /* never use */ +} CURLSHcode; + +typedef enum { + CURLSHOPT_NONE, /* don't use */ + CURLSHOPT_SHARE, /* specify a data type to share */ + CURLSHOPT_UNSHARE, /* specify which data type to stop sharing */ + CURLSHOPT_LOCKFUNC, /* pass in a 'curl_lock_function' pointer */ + CURLSHOPT_UNLOCKFUNC, /* pass in a 'curl_unlock_function' pointer */ + CURLSHOPT_USERDATA, /* pass in a user data pointer used in the lock/unlock + callback functions */ + CURLSHOPT_LAST /* never use */ +} CURLSHoption; + +CURL_EXTERN CURLSH *curl_share_init(void); +CURL_EXTERN CURLSHcode curl_share_setopt(CURLSH *, CURLSHoption option, ...); +CURL_EXTERN CURLSHcode curl_share_cleanup(CURLSH *); + +/**************************************************************************** + * Structures for querying information about the curl library at runtime. + */ + +typedef enum { + CURLVERSION_FIRST, + CURLVERSION_SECOND, + CURLVERSION_THIRD, + CURLVERSION_FOURTH, + CURLVERSION_LAST /* never actually use this */ +} CURLversion; + +/* The 'CURLVERSION_NOW' is the symbolic name meant to be used by + basically all programs ever that want to get version information. It is + meant to be a built-in version number for what kind of struct the caller + expects. If the struct ever changes, we redefine the NOW to another enum + from above. */ +#define CURLVERSION_NOW CURLVERSION_FOURTH + +typedef struct { + CURLversion age; /* age of the returned struct */ + const char *version; /* LIBCURL_VERSION */ + unsigned int version_num; /* LIBCURL_VERSION_NUM */ + const char *host; /* OS/host/cpu/machine when configured */ + int features; /* bitmask, see defines below */ + const char *ssl_version; /* human readable string */ + long ssl_version_num; /* not used anymore, always 0 */ + const char *libz_version; /* human readable string */ + /* protocols is terminated by an entry with a NULL protoname */ + const char * const *protocols; + + /* The fields below this were added in CURLVERSION_SECOND */ + const char *ares; + int ares_num; + + /* This field was added in CURLVERSION_THIRD */ + const char *libidn; + + /* These field were added in CURLVERSION_FOURTH */ + + /* Same as '_libiconv_version' if built with HAVE_ICONV */ + int iconv_ver_num; + + const char *libssh_version; /* human readable string */ + +} curl_version_info_data; + +#define CURL_VERSION_IPV6 (1<<0) /* IPv6-enabled */ +#define CURL_VERSION_KERBEROS4 (1<<1) /* Kerberos V4 auth is supported + (deprecated) */ +#define CURL_VERSION_SSL (1<<2) /* SSL options are present */ +#define CURL_VERSION_LIBZ (1<<3) /* libz features are present */ +#define CURL_VERSION_NTLM (1<<4) /* NTLM auth is supported */ +#define CURL_VERSION_GSSNEGOTIATE (1<<5) /* Negotiate auth is supported + (deprecated) */ +#define CURL_VERSION_DEBUG (1<<6) /* Built with debug capabilities */ +#define CURL_VERSION_ASYNCHDNS (1<<7) /* Asynchronous DNS resolves */ +#define CURL_VERSION_SPNEGO (1<<8) /* SPNEGO auth is supported */ +#define CURL_VERSION_LARGEFILE (1<<9) /* Supports files larger than 2GB */ +#define CURL_VERSION_IDN (1<<10) /* Internationized Domain Names are + supported */ +#define CURL_VERSION_SSPI (1<<11) /* Built against Windows SSPI */ +#define CURL_VERSION_CONV (1<<12) /* Character conversions supported */ +#define CURL_VERSION_CURLDEBUG (1<<13) /* Debug memory tracking supported */ +#define CURL_VERSION_TLSAUTH_SRP (1<<14) /* TLS-SRP auth is supported */ +#define CURL_VERSION_NTLM_WB (1<<15) /* NTLM delegation to winbind helper + is suported */ +#define CURL_VERSION_HTTP2 (1<<16) /* HTTP2 support built-in */ +#define CURL_VERSION_GSSAPI (1<<17) /* Built against a GSS-API library */ +#define CURL_VERSION_KERBEROS5 (1<<18) /* Kerberos V5 auth is supported */ +#define CURL_VERSION_UNIX_SOCKETS (1<<19) /* Unix domain sockets support */ +#define CURL_VERSION_PSL (1<<20) /* Mozilla's Public Suffix List, used + for cookie domain verification */ +#define CURL_VERSION_HTTPS_PROXY (1<<21) /* HTTPS-proxy support built-in */ + + /* + * NAME curl_version_info() + * + * DESCRIPTION + * + * This function returns a pointer to a static copy of the version info + * struct. See above. + */ +CURL_EXTERN curl_version_info_data *curl_version_info(CURLversion); + +/* + * NAME curl_easy_strerror() + * + * DESCRIPTION + * + * The curl_easy_strerror function may be used to turn a CURLcode value + * into the equivalent human readable error string. This is useful + * for printing meaningful error messages. + */ +CURL_EXTERN const char *curl_easy_strerror(CURLcode); + +/* + * NAME curl_share_strerror() + * + * DESCRIPTION + * + * The curl_share_strerror function may be used to turn a CURLSHcode value + * into the equivalent human readable error string. This is useful + * for printing meaningful error messages. + */ +CURL_EXTERN const char *curl_share_strerror(CURLSHcode); + +/* + * NAME curl_easy_pause() + * + * DESCRIPTION + * + * The curl_easy_pause function pauses or unpauses transfers. Select the new + * state by setting the bitmask, use the convenience defines below. + * + */ +CURL_EXTERN CURLcode curl_easy_pause(CURL *handle, int bitmask); + +#define CURLPAUSE_RECV (1<<0) +#define CURLPAUSE_RECV_CONT (0) + +#define CURLPAUSE_SEND (1<<2) +#define CURLPAUSE_SEND_CONT (0) + +#define CURLPAUSE_ALL (CURLPAUSE_RECV|CURLPAUSE_SEND) +#define CURLPAUSE_CONT (CURLPAUSE_RECV_CONT|CURLPAUSE_SEND_CONT) + +#ifdef __cplusplus +} +#endif + +/* unfortunately, the easy.h and multi.h include files need options and info + stuff before they can be included! */ +#include "easy.h" /* nothing in curl is fun without the easy stuff */ +#include "multi.h" + +/* the typechecker doesn't work in C++ (yet) */ +#if defined(__GNUC__) && defined(__GNUC_MINOR__) && \ + ((__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3)) && \ + !defined(__cplusplus) && !defined(CURL_DISABLE_TYPECHECK) +#include "typecheck-gcc.h" +#else +#if defined(__STDC__) && (__STDC__ >= 1) +/* This preprocessor magic that replaces a call with the exact same call is + only done to make sure application authors pass exactly three arguments + to these functions. */ +#define curl_easy_setopt(handle,opt,param) curl_easy_setopt(handle,opt,param) +#define curl_easy_getinfo(handle,info,arg) curl_easy_getinfo(handle,info,arg) +#define curl_share_setopt(share,opt,param) curl_share_setopt(share,opt,param) +#define curl_multi_setopt(handle,opt,param) curl_multi_setopt(handle,opt,param) +#endif /* __STDC__ >= 1 */ +#endif /* gcc >= 4.3 && !__cplusplus */ + +#endif /* __CURL_CURL_H */ diff --git a/win_lib/include/curl/curlbuild.h b/win_lib/include/curl/curlbuild.h new file mode 100644 index 000000000..80e4ba7ca --- /dev/null +++ b/win_lib/include/curl/curlbuild.h @@ -0,0 +1,198 @@ +/* include/curl/curlbuild.h. Generated from curlbuild.h.in by configure. */ +#ifndef __CURL_CURLBUILD_H +#define __CURL_CURLBUILD_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2012, Daniel Stenberg, , et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +/* ================================================================ */ +/* NOTES FOR CONFIGURE CAPABLE SYSTEMS */ +/* ================================================================ */ + +/* + * NOTE 1: + * ------- + * + * Nothing in this file is intended to be modified or adjusted by the + * curl library user nor by the curl library builder. + * + * If you think that something actually needs to be changed, adjusted + * or fixed in this file, then, report it on the libcurl development + * mailing list: https://cool.haxx.se/mailman/listinfo/curl-library/ + * + * This header file shall only export symbols which are 'curl' or 'CURL' + * prefixed, otherwise public name space would be polluted. + * + * NOTE 2: + * ------- + * + * Right now you might be staring at file include/curl/curlbuild.h.in or + * at file include/curl/curlbuild.h, this is due to the following reason: + * + * On systems capable of running the configure script, the configure process + * will overwrite the distributed include/curl/curlbuild.h file with one that + * is suitable and specific to the library being configured and built, which + * is generated from the include/curl/curlbuild.h.in template file. + * + */ + +/* ================================================================ */ +/* DEFINITION OF THESE SYMBOLS SHALL NOT TAKE PLACE ANYWHERE ELSE */ +/* ================================================================ */ + +#ifdef CURL_SIZEOF_LONG +#error "CURL_SIZEOF_LONG shall not be defined except in curlbuild.h" + Error Compilation_aborted_CURL_SIZEOF_LONG_already_defined +#endif + +#ifdef CURL_TYPEOF_CURL_SOCKLEN_T +#error "CURL_TYPEOF_CURL_SOCKLEN_T shall not be defined except in curlbuild.h" + Error Compilation_aborted_CURL_TYPEOF_CURL_SOCKLEN_T_already_defined +#endif + +#ifdef CURL_SIZEOF_CURL_SOCKLEN_T +#error "CURL_SIZEOF_CURL_SOCKLEN_T shall not be defined except in curlbuild.h" + Error Compilation_aborted_CURL_SIZEOF_CURL_SOCKLEN_T_already_defined +#endif + +#ifdef CURL_TYPEOF_CURL_OFF_T +#error "CURL_TYPEOF_CURL_OFF_T shall not be defined except in curlbuild.h" + Error Compilation_aborted_CURL_TYPEOF_CURL_OFF_T_already_defined +#endif + +#ifdef CURL_FORMAT_CURL_OFF_T +#error "CURL_FORMAT_CURL_OFF_T shall not be defined except in curlbuild.h" + Error Compilation_aborted_CURL_FORMAT_CURL_OFF_T_already_defined +#endif + +#ifdef CURL_FORMAT_CURL_OFF_TU +#error "CURL_FORMAT_CURL_OFF_TU shall not be defined except in curlbuild.h" + Error Compilation_aborted_CURL_FORMAT_CURL_OFF_TU_already_defined +#endif + +#ifdef CURL_FORMAT_OFF_T +#error "CURL_FORMAT_OFF_T shall not be defined except in curlbuild.h" + Error Compilation_aborted_CURL_FORMAT_OFF_T_already_defined +#endif + +#ifdef CURL_SIZEOF_CURL_OFF_T +#error "CURL_SIZEOF_CURL_OFF_T shall not be defined except in curlbuild.h" + Error Compilation_aborted_CURL_SIZEOF_CURL_OFF_T_already_defined +#endif + +#ifdef CURL_SUFFIX_CURL_OFF_T +#error "CURL_SUFFIX_CURL_OFF_T shall not be defined except in curlbuild.h" + Error Compilation_aborted_CURL_SUFFIX_CURL_OFF_T_already_defined +#endif + +#ifdef CURL_SUFFIX_CURL_OFF_TU +#error "CURL_SUFFIX_CURL_OFF_TU shall not be defined except in curlbuild.h" + Error Compilation_aborted_CURL_SUFFIX_CURL_OFF_TU_already_defined +#endif + +/* ================================================================ */ +/* EXTERNAL INTERFACE SETTINGS FOR CONFIGURE CAPABLE SYSTEMS ONLY */ +/* ================================================================ */ + +/* Configure process defines this to 1 when it finds out that system */ +/* header file ws2tcpip.h must be included by the external interface. */ +#define CURL_PULL_WS2TCPIP_H 1 +#ifdef CURL_PULL_WS2TCPIP_H +# ifndef WIN32_LEAN_AND_MEAN +# define WIN32_LEAN_AND_MEAN 1 +# endif +# include +# include +# include +#endif + +/* Configure process defines this to 1 when it finds out that system */ +/* header file sys/types.h must be included by the external interface. */ +#define CURL_PULL_SYS_TYPES_H 1 +#ifdef CURL_PULL_SYS_TYPES_H +# include +#endif + +/* Configure process defines this to 1 when it finds out that system */ +/* header file stdint.h must be included by the external interface. */ +#define CURL_PULL_STDINT_H 1 +#ifdef CURL_PULL_STDINT_H +# include +#endif + +/* Configure process defines this to 1 when it finds out that system */ +/* header file inttypes.h must be included by the external interface. */ +#define CURL_PULL_INTTYPES_H 1 +#ifdef CURL_PULL_INTTYPES_H +# include +#endif + +/* Configure process defines this to 1 when it finds out that system */ +/* header file sys/socket.h must be included by the external interface. */ +/* #undef CURL_PULL_SYS_SOCKET_H */ +#ifdef CURL_PULL_SYS_SOCKET_H +# include +#endif + +/* Configure process defines this to 1 when it finds out that system */ +/* header file sys/poll.h must be included by the external interface. */ +/* #undef CURL_PULL_SYS_POLL_H */ +#ifdef CURL_PULL_SYS_POLL_H +# include +#endif + +/* The size of `long', as computed by sizeof. */ +#define CURL_SIZEOF_LONG 4 + +/* Integral data type used for curl_socklen_t. */ +#define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t + +/* The size of `curl_socklen_t', as computed by sizeof. */ +#define CURL_SIZEOF_CURL_SOCKLEN_T 4 + +/* Data type definition of curl_socklen_t. */ +typedef CURL_TYPEOF_CURL_SOCKLEN_T curl_socklen_t; + +/* Signed integral data type used for curl_off_t. */ +#define CURL_TYPEOF_CURL_OFF_T int64_t + +/* Data type definition of curl_off_t. */ +typedef CURL_TYPEOF_CURL_OFF_T curl_off_t; + +/* curl_off_t formatting string directive without "%" conversion specifier. */ +#define CURL_FORMAT_CURL_OFF_T "I64d" + +/* unsigned curl_off_t formatting string without "%" conversion specifier. */ +#define CURL_FORMAT_CURL_OFF_TU "I64u" + +/* curl_off_t formatting string directive with "%" conversion specifier. */ +#define CURL_FORMAT_OFF_T "%I64d" + +/* The size of `curl_off_t', as computed by sizeof. */ +#define CURL_SIZEOF_CURL_OFF_T 8 + +/* curl_off_t constant suffix. */ +#define CURL_SUFFIX_CURL_OFF_T LL + +/* unsigned curl_off_t constant suffix. */ +#define CURL_SUFFIX_CURL_OFF_TU ULL + +#endif /* __CURL_CURLBUILD_H */ diff --git a/win_lib/include/curl/curlrules.h b/win_lib/include/curl/curlrules.h new file mode 100644 index 000000000..55d21f68f --- /dev/null +++ b/win_lib/include/curl/curlrules.h @@ -0,0 +1,262 @@ +#ifndef __CURL_CURLRULES_H +#define __CURL_CURLRULES_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2012, Daniel Stenberg, , et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +/* ================================================================ */ +/* COMPILE TIME SANITY CHECKS */ +/* ================================================================ */ + +/* + * NOTE 1: + * ------- + * + * All checks done in this file are intentionally placed in a public + * header file which is pulled by curl/curl.h when an application is + * being built using an already built libcurl library. Additionally + * this file is also included and used when building the library. + * + * If compilation fails on this file it is certainly sure that the + * problem is elsewhere. It could be a problem in the curlbuild.h + * header file, or simply that you are using different compilation + * settings than those used to build the library. + * + * Nothing in this file is intended to be modified or adjusted by the + * curl library user nor by the curl library builder. + * + * Do not deactivate any check, these are done to make sure that the + * library is properly built and used. + * + * You can find further help on the libcurl development mailing list: + * https://cool.haxx.se/mailman/listinfo/curl-library/ + * + * NOTE 2 + * ------ + * + * Some of the following compile time checks are based on the fact + * that the dimension of a constant array can not be a negative one. + * In this way if the compile time verification fails, the compilation + * will fail issuing an error. The error description wording is compiler + * dependent but it will be quite similar to one of the following: + * + * "negative subscript or subscript is too large" + * "array must have at least one element" + * "-1 is an illegal array size" + * "size of array is negative" + * + * If you are building an application which tries to use an already + * built libcurl library and you are getting this kind of errors on + * this file, it is a clear indication that there is a mismatch between + * how the library was built and how you are trying to use it for your + * application. Your already compiled or binary library provider is the + * only one who can give you the details you need to properly use it. + */ + +/* + * Verify that some macros are actually defined. + */ + +#ifndef CURL_SIZEOF_LONG +# error "CURL_SIZEOF_LONG definition is missing!" + Error Compilation_aborted_CURL_SIZEOF_LONG_is_missing +#endif + +#ifndef CURL_TYPEOF_CURL_SOCKLEN_T +# error "CURL_TYPEOF_CURL_SOCKLEN_T definition is missing!" + Error Compilation_aborted_CURL_TYPEOF_CURL_SOCKLEN_T_is_missing +#endif + +#ifndef CURL_SIZEOF_CURL_SOCKLEN_T +# error "CURL_SIZEOF_CURL_SOCKLEN_T definition is missing!" + Error Compilation_aborted_CURL_SIZEOF_CURL_SOCKLEN_T_is_missing +#endif + +#ifndef CURL_TYPEOF_CURL_OFF_T +# error "CURL_TYPEOF_CURL_OFF_T definition is missing!" + Error Compilation_aborted_CURL_TYPEOF_CURL_OFF_T_is_missing +#endif + +#ifndef CURL_FORMAT_CURL_OFF_T +# error "CURL_FORMAT_CURL_OFF_T definition is missing!" + Error Compilation_aborted_CURL_FORMAT_CURL_OFF_T_is_missing +#endif + +#ifndef CURL_FORMAT_CURL_OFF_TU +# error "CURL_FORMAT_CURL_OFF_TU definition is missing!" + Error Compilation_aborted_CURL_FORMAT_CURL_OFF_TU_is_missing +#endif + +#ifndef CURL_FORMAT_OFF_T +# error "CURL_FORMAT_OFF_T definition is missing!" + Error Compilation_aborted_CURL_FORMAT_OFF_T_is_missing +#endif + +#ifndef CURL_SIZEOF_CURL_OFF_T +# error "CURL_SIZEOF_CURL_OFF_T definition is missing!" + Error Compilation_aborted_CURL_SIZEOF_CURL_OFF_T_is_missing +#endif + +#ifndef CURL_SUFFIX_CURL_OFF_T +# error "CURL_SUFFIX_CURL_OFF_T definition is missing!" + Error Compilation_aborted_CURL_SUFFIX_CURL_OFF_T_is_missing +#endif + +#ifndef CURL_SUFFIX_CURL_OFF_TU +# error "CURL_SUFFIX_CURL_OFF_TU definition is missing!" + Error Compilation_aborted_CURL_SUFFIX_CURL_OFF_TU_is_missing +#endif + +/* + * Macros private to this header file. + */ + +#define CurlchkszEQ(t, s) sizeof(t) == s ? 1 : -1 + +#define CurlchkszGE(t1, t2) sizeof(t1) >= sizeof(t2) ? 1 : -1 + +/* + * Verify that the size previously defined and expected for long + * is the same as the one reported by sizeof() at compile time. + */ + +typedef char + __curl_rule_01__ + [CurlchkszEQ(long, CURL_SIZEOF_LONG)]; + +/* + * Verify that the size previously defined and expected for + * curl_off_t is actually the the same as the one reported + * by sizeof() at compile time. + */ + +typedef char + __curl_rule_02__ + [CurlchkszEQ(curl_off_t, CURL_SIZEOF_CURL_OFF_T)]; + +/* + * Verify at compile time that the size of curl_off_t as reported + * by sizeof() is greater or equal than the one reported for long + * for the current compilation. + */ + +typedef char + __curl_rule_03__ + [CurlchkszGE(curl_off_t, long)]; + +/* + * Verify that the size previously defined and expected for + * curl_socklen_t is actually the the same as the one reported + * by sizeof() at compile time. + */ + +typedef char + __curl_rule_04__ + [CurlchkszEQ(curl_socklen_t, CURL_SIZEOF_CURL_SOCKLEN_T)]; + +/* + * Verify at compile time that the size of curl_socklen_t as reported + * by sizeof() is greater or equal than the one reported for int for + * the current compilation. + */ + +typedef char + __curl_rule_05__ + [CurlchkszGE(curl_socklen_t, int)]; + +/* ================================================================ */ +/* EXTERNALLY AND INTERNALLY VISIBLE DEFINITIONS */ +/* ================================================================ */ + +/* + * CURL_ISOCPP and CURL_OFF_T_C definitions are done here in order to allow + * these to be visible and exported by the external libcurl interface API, + * while also making them visible to the library internals, simply including + * curl_setup.h, without actually needing to include curl.h internally. + * If some day this section would grow big enough, all this should be moved + * to its own header file. + */ + +/* + * Figure out if we can use the ## preprocessor operator, which is supported + * by ISO/ANSI C and C++. Some compilers support it without setting __STDC__ + * or __cplusplus so we need to carefully check for them too. + */ + +#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus) || \ + defined(__HP_aCC) || defined(__BORLANDC__) || defined(__LCC__) || \ + defined(__POCC__) || defined(__SALFORDC__) || defined(__HIGHC__) || \ + defined(__ILEC400__) + /* This compiler is believed to have an ISO compatible preprocessor */ +#define CURL_ISOCPP +#else + /* This compiler is believed NOT to have an ISO compatible preprocessor */ +#undef CURL_ISOCPP +#endif + +/* + * Macros for minimum-width signed and unsigned curl_off_t integer constants. + */ + +#if defined(__BORLANDC__) && (__BORLANDC__ == 0x0551) +# define __CURL_OFF_T_C_HLPR2(x) x +# define __CURL_OFF_T_C_HLPR1(x) __CURL_OFF_T_C_HLPR2(x) +# define CURL_OFF_T_C(Val) __CURL_OFF_T_C_HLPR1(Val) ## \ + __CURL_OFF_T_C_HLPR1(CURL_SUFFIX_CURL_OFF_T) +# define CURL_OFF_TU_C(Val) __CURL_OFF_T_C_HLPR1(Val) ## \ + __CURL_OFF_T_C_HLPR1(CURL_SUFFIX_CURL_OFF_TU) +#else +# ifdef CURL_ISOCPP +# define __CURL_OFF_T_C_HLPR2(Val,Suffix) Val ## Suffix +# else +# define __CURL_OFF_T_C_HLPR2(Val,Suffix) Val/**/Suffix +# endif +# define __CURL_OFF_T_C_HLPR1(Val,Suffix) __CURL_OFF_T_C_HLPR2(Val,Suffix) +# define CURL_OFF_T_C(Val) __CURL_OFF_T_C_HLPR1(Val,CURL_SUFFIX_CURL_OFF_T) +# define CURL_OFF_TU_C(Val) __CURL_OFF_T_C_HLPR1(Val,CURL_SUFFIX_CURL_OFF_TU) +#endif + +/* + * Get rid of macros private to this header file. + */ + +#undef CurlchkszEQ +#undef CurlchkszGE + +/* + * Get rid of macros not intended to exist beyond this point. + */ + +#undef CURL_PULL_WS2TCPIP_H +#undef CURL_PULL_SYS_TYPES_H +#undef CURL_PULL_SYS_SOCKET_H +#undef CURL_PULL_SYS_POLL_H +#undef CURL_PULL_STDINT_H +#undef CURL_PULL_INTTYPES_H + +#undef CURL_TYPEOF_CURL_SOCKLEN_T +#undef CURL_TYPEOF_CURL_OFF_T + +#ifdef CURL_NO_OLDIES +#undef CURL_FORMAT_OFF_T /* not required since 7.19.0 - obsoleted in 7.20.0 */ +#endif + +#endif /* __CURL_CURLRULES_H */ diff --git a/win_lib/include/curl/curlver.h b/win_lib/include/curl/curlver.h new file mode 100644 index 000000000..ae91b0d2b --- /dev/null +++ b/win_lib/include/curl/curlver.h @@ -0,0 +1,77 @@ +#ifndef __CURL_CURLVER_H +#define __CURL_CURLVER_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2016, Daniel Stenberg, , et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +/* This header file contains nothing but libcurl version info, generated by + a script at release-time. This was made its own header file in 7.11.2 */ + +/* This is the global package copyright */ +#define LIBCURL_COPYRIGHT "1996 - 2016 Daniel Stenberg, ." + +/* This is the version number of the libcurl package from which this header + file origins: */ +#define LIBCURL_VERSION "7.52.1" + +/* The numeric version number is also available "in parts" by using these + defines: */ +#define LIBCURL_VERSION_MAJOR 7 +#define LIBCURL_VERSION_MINOR 52 +#define LIBCURL_VERSION_PATCH 1 + +/* This is the numeric version of the libcurl version number, meant for easier + parsing and comparions by programs. The LIBCURL_VERSION_NUM define will + always follow this syntax: + + 0xXXYYZZ + + Where XX, YY and ZZ are the main version, release and patch numbers in + hexadecimal (using 8 bits each). All three numbers are always represented + using two digits. 1.2 would appear as "0x010200" while version 9.11.7 + appears as "0x090b07". + + This 6-digit (24 bits) hexadecimal number does not show pre-release number, + and it is always a greater number in a more recent release. It makes + comparisons with greater than and less than work. + + Note: This define is the full hex number and _does not_ use the + CURL_VERSION_BITS() macro since curl's own configure script greps for it + and needs it to contain the full number. +*/ +#define LIBCURL_VERSION_NUM 0x073401 + +/* + * This is the date and time when the full source package was created. The + * timestamp is not stored in git, as the timestamp is properly set in the + * tarballs by the maketgz script. + * + * The format of the date should follow this template: + * + * "Mon Feb 12 11:35:33 UTC 2007" + */ +#define LIBCURL_TIMESTAMP "Fri Dec 23 07:22:31 UTC 2016" + +#define CURL_VERSION_BITS(x,y,z) ((x)<<16|(y)<<8|z) +#define CURL_AT_LEAST_VERSION(x,y,z) \ + (LIBCURL_VERSION_NUM >= CURL_VERSION_BITS(x, y, z)) + +#endif /* __CURL_CURLVER_H */ diff --git a/win_lib/include/curl/easy.h b/win_lib/include/curl/easy.h new file mode 100644 index 000000000..752c5049f --- /dev/null +++ b/win_lib/include/curl/easy.h @@ -0,0 +1,102 @@ +#ifndef __CURL_EASY_H +#define __CURL_EASY_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2016, Daniel Stenberg, , et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ +#ifdef __cplusplus +extern "C" { +#endif + +CURL_EXTERN CURL *curl_easy_init(void); +CURL_EXTERN CURLcode curl_easy_setopt(CURL *curl, CURLoption option, ...); +CURL_EXTERN CURLcode curl_easy_perform(CURL *curl); +CURL_EXTERN void curl_easy_cleanup(CURL *curl); + +/* + * NAME curl_easy_getinfo() + * + * DESCRIPTION + * + * Request internal information from the curl session with this function. The + * third argument MUST be a pointer to a long, a pointer to a char * or a + * pointer to a double (as the documentation describes elsewhere). The data + * pointed to will be filled in accordingly and can be relied upon only if the + * function returns CURLE_OK. This function is intended to get used *AFTER* a + * performed transfer, all results from this function are undefined until the + * transfer is completed. + */ +CURL_EXTERN CURLcode curl_easy_getinfo(CURL *curl, CURLINFO info, ...); + + +/* + * NAME curl_easy_duphandle() + * + * DESCRIPTION + * + * Creates a new curl session handle with the same options set for the handle + * passed in. Duplicating a handle could only be a matter of cloning data and + * options, internal state info and things like persistent connections cannot + * be transferred. It is useful in multithreaded applications when you can run + * curl_easy_duphandle() for each new thread to avoid a series of identical + * curl_easy_setopt() invokes in every thread. + */ +CURL_EXTERN CURL *curl_easy_duphandle(CURL *curl); + +/* + * NAME curl_easy_reset() + * + * DESCRIPTION + * + * Re-initializes a CURL handle to the default values. This puts back the + * handle to the same state as it was in when it was just created. + * + * It does keep: live connections, the Session ID cache, the DNS cache and the + * cookies. + */ +CURL_EXTERN void curl_easy_reset(CURL *curl); + +/* + * NAME curl_easy_recv() + * + * DESCRIPTION + * + * Receives data from the connected socket. Use after successful + * curl_easy_perform() with CURLOPT_CONNECT_ONLY option. + */ +CURL_EXTERN CURLcode curl_easy_recv(CURL *curl, void *buffer, size_t buflen, + size_t *n); + +/* + * NAME curl_easy_send() + * + * DESCRIPTION + * + * Sends data over the connected socket. Use after successful + * curl_easy_perform() with CURLOPT_CONNECT_ONLY option. + */ +CURL_EXTERN CURLcode curl_easy_send(CURL *curl, const void *buffer, + size_t buflen, size_t *n); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/win_lib/include/curl/mprintf.h b/win_lib/include/curl/mprintf.h new file mode 100644 index 000000000..e20f546e1 --- /dev/null +++ b/win_lib/include/curl/mprintf.h @@ -0,0 +1,50 @@ +#ifndef __CURL_MPRINTF_H +#define __CURL_MPRINTF_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2016, Daniel Stenberg, , et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +#include +#include /* needed for FILE */ +#include "curl.h" /* for CURL_EXTERN */ + +#ifdef __cplusplus +extern "C" { +#endif + +CURL_EXTERN int curl_mprintf(const char *format, ...); +CURL_EXTERN int curl_mfprintf(FILE *fd, const char *format, ...); +CURL_EXTERN int curl_msprintf(char *buffer, const char *format, ...); +CURL_EXTERN int curl_msnprintf(char *buffer, size_t maxlength, + const char *format, ...); +CURL_EXTERN int curl_mvprintf(const char *format, va_list args); +CURL_EXTERN int curl_mvfprintf(FILE *fd, const char *format, va_list args); +CURL_EXTERN int curl_mvsprintf(char *buffer, const char *format, va_list args); +CURL_EXTERN int curl_mvsnprintf(char *buffer, size_t maxlength, + const char *format, va_list args); +CURL_EXTERN char *curl_maprintf(const char *format, ...); +CURL_EXTERN char *curl_mvaprintf(const char *format, va_list args); + +#ifdef __cplusplus +} +#endif + +#endif /* __CURL_MPRINTF_H */ diff --git a/win_lib/include/curl/multi.h b/win_lib/include/curl/multi.h new file mode 100644 index 000000000..d1e00cc5d --- /dev/null +++ b/win_lib/include/curl/multi.h @@ -0,0 +1,439 @@ +#ifndef __CURL_MULTI_H +#define __CURL_MULTI_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2016, Daniel Stenberg, , et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ +/* + This is an "external" header file. Don't give away any internals here! + + GOALS + + o Enable a "pull" interface. The application that uses libcurl decides where + and when to ask libcurl to get/send data. + + o Enable multiple simultaneous transfers in the same thread without making it + complicated for the application. + + o Enable the application to select() on its own file descriptors and curl's + file descriptors simultaneous easily. + +*/ + +/* + * This header file should not really need to include "curl.h" since curl.h + * itself includes this file and we expect user applications to do #include + * without the need for especially including multi.h. + * + * For some reason we added this include here at one point, and rather than to + * break existing (wrongly written) libcurl applications, we leave it as-is + * but with this warning attached. + */ +#include "curl.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(BUILDING_LIBCURL) || defined(CURL_STRICTER) +typedef struct Curl_multi CURLM; +#else +typedef void CURLM; +#endif + +typedef enum { + CURLM_CALL_MULTI_PERFORM = -1, /* please call curl_multi_perform() or + curl_multi_socket*() soon */ + CURLM_OK, + CURLM_BAD_HANDLE, /* the passed-in handle is not a valid CURLM handle */ + CURLM_BAD_EASY_HANDLE, /* an easy handle was not good/valid */ + CURLM_OUT_OF_MEMORY, /* if you ever get this, you're in deep sh*t */ + CURLM_INTERNAL_ERROR, /* this is a libcurl bug */ + CURLM_BAD_SOCKET, /* the passed in socket argument did not match */ + CURLM_UNKNOWN_OPTION, /* curl_multi_setopt() with unsupported option */ + CURLM_ADDED_ALREADY, /* an easy handle already added to a multi handle was + attempted to get added - again */ + CURLM_LAST +} CURLMcode; + +/* just to make code nicer when using curl_multi_socket() you can now check + for CURLM_CALL_MULTI_SOCKET too in the same style it works for + curl_multi_perform() and CURLM_CALL_MULTI_PERFORM */ +#define CURLM_CALL_MULTI_SOCKET CURLM_CALL_MULTI_PERFORM + +/* bitmask bits for CURLMOPT_PIPELINING */ +#define CURLPIPE_NOTHING 0L +#define CURLPIPE_HTTP1 1L +#define CURLPIPE_MULTIPLEX 2L + +typedef enum { + CURLMSG_NONE, /* first, not used */ + CURLMSG_DONE, /* This easy handle has completed. 'result' contains + the CURLcode of the transfer */ + CURLMSG_LAST /* last, not used */ +} CURLMSG; + +struct CURLMsg { + CURLMSG msg; /* what this message means */ + CURL *easy_handle; /* the handle it concerns */ + union { + void *whatever; /* message-specific data */ + CURLcode result; /* return code for transfer */ + } data; +}; +typedef struct CURLMsg CURLMsg; + +/* Based on poll(2) structure and values. + * We don't use pollfd and POLL* constants explicitly + * to cover platforms without poll(). */ +#define CURL_WAIT_POLLIN 0x0001 +#define CURL_WAIT_POLLPRI 0x0002 +#define CURL_WAIT_POLLOUT 0x0004 + +struct curl_waitfd { + curl_socket_t fd; + short events; + short revents; /* not supported yet */ +}; + +/* + * Name: curl_multi_init() + * + * Desc: inititalize multi-style curl usage + * + * Returns: a new CURLM handle to use in all 'curl_multi' functions. + */ +CURL_EXTERN CURLM *curl_multi_init(void); + +/* + * Name: curl_multi_add_handle() + * + * Desc: add a standard curl handle to the multi stack + * + * Returns: CURLMcode type, general multi error code. + */ +CURL_EXTERN CURLMcode curl_multi_add_handle(CURLM *multi_handle, + CURL *curl_handle); + + /* + * Name: curl_multi_remove_handle() + * + * Desc: removes a curl handle from the multi stack again + * + * Returns: CURLMcode type, general multi error code. + */ +CURL_EXTERN CURLMcode curl_multi_remove_handle(CURLM *multi_handle, + CURL *curl_handle); + + /* + * Name: curl_multi_fdset() + * + * Desc: Ask curl for its fd_set sets. The app can use these to select() or + * poll() on. We want curl_multi_perform() called as soon as one of + * them are ready. + * + * Returns: CURLMcode type, general multi error code. + */ +CURL_EXTERN CURLMcode curl_multi_fdset(CURLM *multi_handle, + fd_set *read_fd_set, + fd_set *write_fd_set, + fd_set *exc_fd_set, + int *max_fd); + +/* + * Name: curl_multi_wait() + * + * Desc: Poll on all fds within a CURLM set as well as any + * additional fds passed to the function. + * + * Returns: CURLMcode type, general multi error code. + */ +CURL_EXTERN CURLMcode curl_multi_wait(CURLM *multi_handle, + struct curl_waitfd extra_fds[], + unsigned int extra_nfds, + int timeout_ms, + int *ret); + + /* + * Name: curl_multi_perform() + * + * Desc: When the app thinks there's data available for curl it calls this + * function to read/write whatever there is right now. This returns + * as soon as the reads and writes are done. This function does not + * require that there actually is data available for reading or that + * data can be written, it can be called just in case. It returns + * the number of handles that still transfer data in the second + * argument's integer-pointer. + * + * Returns: CURLMcode type, general multi error code. *NOTE* that this only + * returns errors etc regarding the whole multi stack. There might + * still have occurred problems on invidual transfers even when this + * returns OK. + */ +CURL_EXTERN CURLMcode curl_multi_perform(CURLM *multi_handle, + int *running_handles); + + /* + * Name: curl_multi_cleanup() + * + * Desc: Cleans up and removes a whole multi stack. It does not free or + * touch any individual easy handles in any way. We need to define + * in what state those handles will be if this function is called + * in the middle of a transfer. + * + * Returns: CURLMcode type, general multi error code. + */ +CURL_EXTERN CURLMcode curl_multi_cleanup(CURLM *multi_handle); + +/* + * Name: curl_multi_info_read() + * + * Desc: Ask the multi handle if there's any messages/informationals from + * the individual transfers. Messages include informationals such as + * error code from the transfer or just the fact that a transfer is + * completed. More details on these should be written down as well. + * + * Repeated calls to this function will return a new struct each + * time, until a special "end of msgs" struct is returned as a signal + * that there is no more to get at this point. + * + * The data the returned pointer points to will not survive calling + * curl_multi_cleanup(). + * + * The 'CURLMsg' struct is meant to be very simple and only contain + * very basic informations. If more involved information is wanted, + * we will provide the particular "transfer handle" in that struct + * and that should/could/would be used in subsequent + * curl_easy_getinfo() calls (or similar). The point being that we + * must never expose complex structs to applications, as then we'll + * undoubtably get backwards compatibility problems in the future. + * + * Returns: A pointer to a filled-in struct, or NULL if it failed or ran out + * of structs. It also writes the number of messages left in the + * queue (after this read) in the integer the second argument points + * to. + */ +CURL_EXTERN CURLMsg *curl_multi_info_read(CURLM *multi_handle, + int *msgs_in_queue); + +/* + * Name: curl_multi_strerror() + * + * Desc: The curl_multi_strerror function may be used to turn a CURLMcode + * value into the equivalent human readable error string. This is + * useful for printing meaningful error messages. + * + * Returns: A pointer to a zero-terminated error message. + */ +CURL_EXTERN const char *curl_multi_strerror(CURLMcode); + +/* + * Name: curl_multi_socket() and + * curl_multi_socket_all() + * + * Desc: An alternative version of curl_multi_perform() that allows the + * application to pass in one of the file descriptors that have been + * detected to have "action" on them and let libcurl perform. + * See man page for details. + */ +#define CURL_POLL_NONE 0 +#define CURL_POLL_IN 1 +#define CURL_POLL_OUT 2 +#define CURL_POLL_INOUT 3 +#define CURL_POLL_REMOVE 4 + +#define CURL_SOCKET_TIMEOUT CURL_SOCKET_BAD + +#define CURL_CSELECT_IN 0x01 +#define CURL_CSELECT_OUT 0x02 +#define CURL_CSELECT_ERR 0x04 + +typedef int (*curl_socket_callback)(CURL *easy, /* easy handle */ + curl_socket_t s, /* socket */ + int what, /* see above */ + void *userp, /* private callback + pointer */ + void *socketp); /* private socket + pointer */ +/* + * Name: curl_multi_timer_callback + * + * Desc: Called by libcurl whenever the library detects a change in the + * maximum number of milliseconds the app is allowed to wait before + * curl_multi_socket() or curl_multi_perform() must be called + * (to allow libcurl's timed events to take place). + * + * Returns: The callback should return zero. + */ +typedef int (*curl_multi_timer_callback)(CURLM *multi, /* multi handle */ + long timeout_ms, /* see above */ + void *userp); /* private callback + pointer */ + +CURL_EXTERN CURLMcode curl_multi_socket(CURLM *multi_handle, curl_socket_t s, + int *running_handles); + +CURL_EXTERN CURLMcode curl_multi_socket_action(CURLM *multi_handle, + curl_socket_t s, + int ev_bitmask, + int *running_handles); + +CURL_EXTERN CURLMcode curl_multi_socket_all(CURLM *multi_handle, + int *running_handles); + +#ifndef CURL_ALLOW_OLD_MULTI_SOCKET +/* This macro below was added in 7.16.3 to push users who recompile to use + the new curl_multi_socket_action() instead of the old curl_multi_socket() +*/ +#define curl_multi_socket(x,y,z) curl_multi_socket_action(x,y,0,z) +#endif + +/* + * Name: curl_multi_timeout() + * + * Desc: Returns the maximum number of milliseconds the app is allowed to + * wait before curl_multi_socket() or curl_multi_perform() must be + * called (to allow libcurl's timed events to take place). + * + * Returns: CURLM error code. + */ +CURL_EXTERN CURLMcode curl_multi_timeout(CURLM *multi_handle, + long *milliseconds); + +#undef CINIT /* re-using the same name as in curl.h */ + +#ifdef CURL_ISOCPP +#define CINIT(name,type,num) CURLMOPT_ ## name = CURLOPTTYPE_ ## type + num +#else +/* The macro "##" is ISO C, we assume pre-ISO C doesn't support it. */ +#define LONG CURLOPTTYPE_LONG +#define OBJECTPOINT CURLOPTTYPE_OBJECTPOINT +#define FUNCTIONPOINT CURLOPTTYPE_FUNCTIONPOINT +#define OFF_T CURLOPTTYPE_OFF_T +#define CINIT(name,type,number) CURLMOPT_/**/name = type + number +#endif + +typedef enum { + /* This is the socket callback function pointer */ + CINIT(SOCKETFUNCTION, FUNCTIONPOINT, 1), + + /* This is the argument passed to the socket callback */ + CINIT(SOCKETDATA, OBJECTPOINT, 2), + + /* set to 1 to enable pipelining for this multi handle */ + CINIT(PIPELINING, LONG, 3), + + /* This is the timer callback function pointer */ + CINIT(TIMERFUNCTION, FUNCTIONPOINT, 4), + + /* This is the argument passed to the timer callback */ + CINIT(TIMERDATA, OBJECTPOINT, 5), + + /* maximum number of entries in the connection cache */ + CINIT(MAXCONNECTS, LONG, 6), + + /* maximum number of (pipelining) connections to one host */ + CINIT(MAX_HOST_CONNECTIONS, LONG, 7), + + /* maximum number of requests in a pipeline */ + CINIT(MAX_PIPELINE_LENGTH, LONG, 8), + + /* a connection with a content-length longer than this + will not be considered for pipelining */ + CINIT(CONTENT_LENGTH_PENALTY_SIZE, OFF_T, 9), + + /* a connection with a chunk length longer than this + will not be considered for pipelining */ + CINIT(CHUNK_LENGTH_PENALTY_SIZE, OFF_T, 10), + + /* a list of site names(+port) that are blacklisted from + pipelining */ + CINIT(PIPELINING_SITE_BL, OBJECTPOINT, 11), + + /* a list of server types that are blacklisted from + pipelining */ + CINIT(PIPELINING_SERVER_BL, OBJECTPOINT, 12), + + /* maximum number of open connections in total */ + CINIT(MAX_TOTAL_CONNECTIONS, LONG, 13), + + /* This is the server push callback function pointer */ + CINIT(PUSHFUNCTION, FUNCTIONPOINT, 14), + + /* This is the argument passed to the server push callback */ + CINIT(PUSHDATA, OBJECTPOINT, 15), + + CURLMOPT_LASTENTRY /* the last unused */ +} CURLMoption; + + +/* + * Name: curl_multi_setopt() + * + * Desc: Sets options for the multi handle. + * + * Returns: CURLM error code. + */ +CURL_EXTERN CURLMcode curl_multi_setopt(CURLM *multi_handle, + CURLMoption option, ...); + + +/* + * Name: curl_multi_assign() + * + * Desc: This function sets an association in the multi handle between the + * given socket and a private pointer of the application. This is + * (only) useful for curl_multi_socket uses. + * + * Returns: CURLM error code. + */ +CURL_EXTERN CURLMcode curl_multi_assign(CURLM *multi_handle, + curl_socket_t sockfd, void *sockp); + + +/* + * Name: curl_push_callback + * + * Desc: This callback gets called when a new stream is being pushed by the + * server. It approves or denies the new stream. + * + * Returns: CURL_PUSH_OK or CURL_PUSH_DENY. + */ +#define CURL_PUSH_OK 0 +#define CURL_PUSH_DENY 1 + +struct curl_pushheaders; /* forward declaration only */ + +CURL_EXTERN char *curl_pushheader_bynum(struct curl_pushheaders *h, + size_t num); +CURL_EXTERN char *curl_pushheader_byname(struct curl_pushheaders *h, + const char *name); + +typedef int (*curl_push_callback)(CURL *parent, + CURL *easy, + size_t num_headers, + struct curl_pushheaders *headers, + void *userp); + +#ifdef __cplusplus +} /* end of extern "C" */ +#endif + +#endif diff --git a/win_lib/include/curl/stdcheaders.h b/win_lib/include/curl/stdcheaders.h new file mode 100644 index 000000000..027b6f421 --- /dev/null +++ b/win_lib/include/curl/stdcheaders.h @@ -0,0 +1,33 @@ +#ifndef __STDC_HEADERS_H +#define __STDC_HEADERS_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2016, Daniel Stenberg, , et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +#include + +size_t fread(void *, size_t, size_t, FILE *); +size_t fwrite(const void *, size_t, size_t, FILE *); + +int strcasecmp(const char *, const char *); +int strncasecmp(const char *, const char *, size_t); + +#endif /* __STDC_HEADERS_H */ diff --git a/win_lib/include/curl/typecheck-gcc.h b/win_lib/include/curl/typecheck-gcc.h new file mode 100644 index 000000000..4eb896eaa --- /dev/null +++ b/win_lib/include/curl/typecheck-gcc.h @@ -0,0 +1,623 @@ +#ifndef __CURL_TYPECHECK_GCC_H +#define __CURL_TYPECHECK_GCC_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2016, Daniel Stenberg, , et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +/* wraps curl_easy_setopt() with typechecking */ + +/* To add a new kind of warning, add an + * if(_curl_is_sometype_option(_curl_opt)) + * if(!_curl_is_sometype(value)) + * _curl_easy_setopt_err_sometype(); + * block and define _curl_is_sometype_option, _curl_is_sometype and + * _curl_easy_setopt_err_sometype below + * + * NOTE: We use two nested 'if' statements here instead of the && operator, in + * order to work around gcc bug #32061. It affects only gcc 4.3.x/4.4.x + * when compiling with -Wlogical-op. + * + * To add an option that uses the same type as an existing option, you'll just + * need to extend the appropriate _curl_*_option macro + */ +#define curl_easy_setopt(handle, option, value) \ +__extension__ ({ \ + __typeof__(option) _curl_opt = option; \ + if(__builtin_constant_p(_curl_opt)) { \ + if(_curl_is_long_option(_curl_opt)) \ + if(!_curl_is_long(value)) \ + _curl_easy_setopt_err_long(); \ + if(_curl_is_off_t_option(_curl_opt)) \ + if(!_curl_is_off_t(value)) \ + _curl_easy_setopt_err_curl_off_t(); \ + if(_curl_is_string_option(_curl_opt)) \ + if(!_curl_is_string(value)) \ + _curl_easy_setopt_err_string(); \ + if(_curl_is_write_cb_option(_curl_opt)) \ + if(!_curl_is_write_cb(value)) \ + _curl_easy_setopt_err_write_callback(); \ + if((_curl_opt) == CURLOPT_READFUNCTION) \ + if(!_curl_is_read_cb(value)) \ + _curl_easy_setopt_err_read_cb(); \ + if((_curl_opt) == CURLOPT_IOCTLFUNCTION) \ + if(!_curl_is_ioctl_cb(value)) \ + _curl_easy_setopt_err_ioctl_cb(); \ + if((_curl_opt) == CURLOPT_SOCKOPTFUNCTION) \ + if(!_curl_is_sockopt_cb(value)) \ + _curl_easy_setopt_err_sockopt_cb(); \ + if((_curl_opt) == CURLOPT_OPENSOCKETFUNCTION) \ + if(!_curl_is_opensocket_cb(value)) \ + _curl_easy_setopt_err_opensocket_cb(); \ + if((_curl_opt) == CURLOPT_PROGRESSFUNCTION) \ + if(!_curl_is_progress_cb(value)) \ + _curl_easy_setopt_err_progress_cb(); \ + if((_curl_opt) == CURLOPT_DEBUGFUNCTION) \ + if(!_curl_is_debug_cb(value)) \ + _curl_easy_setopt_err_debug_cb(); \ + if((_curl_opt) == CURLOPT_SSL_CTX_FUNCTION) \ + if(!_curl_is_ssl_ctx_cb(value)) \ + _curl_easy_setopt_err_ssl_ctx_cb(); \ + if(_curl_is_conv_cb_option(_curl_opt)) \ + if(!_curl_is_conv_cb(value)) \ + _curl_easy_setopt_err_conv_cb(); \ + if((_curl_opt) == CURLOPT_SEEKFUNCTION) \ + if(!_curl_is_seek_cb(value)) \ + _curl_easy_setopt_err_seek_cb(); \ + if(_curl_is_cb_data_option(_curl_opt)) \ + if(!_curl_is_cb_data(value)) \ + _curl_easy_setopt_err_cb_data(); \ + if((_curl_opt) == CURLOPT_ERRORBUFFER) \ + if(!_curl_is_error_buffer(value)) \ + _curl_easy_setopt_err_error_buffer(); \ + if((_curl_opt) == CURLOPT_STDERR) \ + if(!_curl_is_FILE(value)) \ + _curl_easy_setopt_err_FILE(); \ + if(_curl_is_postfields_option(_curl_opt)) \ + if(!_curl_is_postfields(value)) \ + _curl_easy_setopt_err_postfields(); \ + if((_curl_opt) == CURLOPT_HTTPPOST) \ + if(!_curl_is_arr((value), struct curl_httppost)) \ + _curl_easy_setopt_err_curl_httpost(); \ + if(_curl_is_slist_option(_curl_opt)) \ + if(!_curl_is_arr((value), struct curl_slist)) \ + _curl_easy_setopt_err_curl_slist(); \ + if((_curl_opt) == CURLOPT_SHARE) \ + if(!_curl_is_ptr((value), CURLSH)) \ + _curl_easy_setopt_err_CURLSH(); \ + } \ + curl_easy_setopt(handle, _curl_opt, value); \ +}) + +/* wraps curl_easy_getinfo() with typechecking */ +/* FIXME: don't allow const pointers */ +#define curl_easy_getinfo(handle, info, arg) \ +__extension__ ({ \ + __typeof__(info) _curl_info = info; \ + if(__builtin_constant_p(_curl_info)) { \ + if(_curl_is_string_info(_curl_info)) \ + if(!_curl_is_arr((arg), char *)) \ + _curl_easy_getinfo_err_string(); \ + if(_curl_is_long_info(_curl_info)) \ + if(!_curl_is_arr((arg), long)) \ + _curl_easy_getinfo_err_long(); \ + if(_curl_is_double_info(_curl_info)) \ + if(!_curl_is_arr((arg), double)) \ + _curl_easy_getinfo_err_double(); \ + if(_curl_is_slist_info(_curl_info)) \ + if(!_curl_is_arr((arg), struct curl_slist *)) \ + _curl_easy_getinfo_err_curl_slist(); \ + } \ + curl_easy_getinfo(handle, _curl_info, arg); \ +}) + +/* TODO: typechecking for curl_share_setopt() and curl_multi_setopt(), + * for now just make sure that the functions are called with three + * arguments + */ +#define curl_share_setopt(share,opt,param) curl_share_setopt(share,opt,param) +#define curl_multi_setopt(handle,opt,param) curl_multi_setopt(handle,opt,param) + + +/* the actual warnings, triggered by calling the _curl_easy_setopt_err* + * functions */ + +/* To define a new warning, use _CURL_WARNING(identifier, "message") */ +#define _CURL_WARNING(id, message) \ + static void __attribute__((__warning__(message))) \ + __attribute__((__unused__)) __attribute__((__noinline__)) \ + id(void) { __asm__(""); } + +_CURL_WARNING(_curl_easy_setopt_err_long, + "curl_easy_setopt expects a long argument for this option") +_CURL_WARNING(_curl_easy_setopt_err_curl_off_t, + "curl_easy_setopt expects a curl_off_t argument for this option") +_CURL_WARNING(_curl_easy_setopt_err_string, + "curl_easy_setopt expects a " + "string ('char *' or char[]) argument for this option" + ) +_CURL_WARNING(_curl_easy_setopt_err_write_callback, + "curl_easy_setopt expects a curl_write_callback argument for this option") +_CURL_WARNING(_curl_easy_setopt_err_read_cb, + "curl_easy_setopt expects a curl_read_callback argument for this option") +_CURL_WARNING(_curl_easy_setopt_err_ioctl_cb, + "curl_easy_setopt expects a curl_ioctl_callback argument for this option") +_CURL_WARNING(_curl_easy_setopt_err_sockopt_cb, + "curl_easy_setopt expects a curl_sockopt_callback argument for this option") +_CURL_WARNING(_curl_easy_setopt_err_opensocket_cb, + "curl_easy_setopt expects a " + "curl_opensocket_callback argument for this option" + ) +_CURL_WARNING(_curl_easy_setopt_err_progress_cb, + "curl_easy_setopt expects a curl_progress_callback argument for this option") +_CURL_WARNING(_curl_easy_setopt_err_debug_cb, + "curl_easy_setopt expects a curl_debug_callback argument for this option") +_CURL_WARNING(_curl_easy_setopt_err_ssl_ctx_cb, + "curl_easy_setopt expects a curl_ssl_ctx_callback argument for this option") +_CURL_WARNING(_curl_easy_setopt_err_conv_cb, + "curl_easy_setopt expects a curl_conv_callback argument for this option") +_CURL_WARNING(_curl_easy_setopt_err_seek_cb, + "curl_easy_setopt expects a curl_seek_callback argument for this option") +_CURL_WARNING(_curl_easy_setopt_err_cb_data, + "curl_easy_setopt expects a " + "private data pointer as argument for this option") +_CURL_WARNING(_curl_easy_setopt_err_error_buffer, + "curl_easy_setopt expects a " + "char buffer of CURL_ERROR_SIZE as argument for this option") +_CURL_WARNING(_curl_easy_setopt_err_FILE, + "curl_easy_setopt expects a 'FILE *' argument for this option") +_CURL_WARNING(_curl_easy_setopt_err_postfields, + "curl_easy_setopt expects a 'void *' or 'char *' argument for this option") +_CURL_WARNING(_curl_easy_setopt_err_curl_httpost, + "curl_easy_setopt expects a 'struct curl_httppost *' " + "argument for this option") +_CURL_WARNING(_curl_easy_setopt_err_curl_slist, + "curl_easy_setopt expects a 'struct curl_slist *' argument for this option") +_CURL_WARNING(_curl_easy_setopt_err_CURLSH, + "curl_easy_setopt expects a CURLSH* argument for this option") + +_CURL_WARNING(_curl_easy_getinfo_err_string, + "curl_easy_getinfo expects a pointer to 'char *' for this info") +_CURL_WARNING(_curl_easy_getinfo_err_long, + "curl_easy_getinfo expects a pointer to long for this info") +_CURL_WARNING(_curl_easy_getinfo_err_double, + "curl_easy_getinfo expects a pointer to double for this info") +_CURL_WARNING(_curl_easy_getinfo_err_curl_slist, + "curl_easy_getinfo expects a pointer to 'struct curl_slist *' for this info") + +/* groups of curl_easy_setops options that take the same type of argument */ + +/* To add a new option to one of the groups, just add + * (option) == CURLOPT_SOMETHING + * to the or-expression. If the option takes a long or curl_off_t, you don't + * have to do anything + */ + +/* evaluates to true if option takes a long argument */ +#define _curl_is_long_option(option) \ + (0 < (option) && (option) < CURLOPTTYPE_OBJECTPOINT) + +#define _curl_is_off_t_option(option) \ + ((option) > CURLOPTTYPE_OFF_T) + +/* evaluates to true if option takes a char* argument */ +#define _curl_is_string_option(option) \ + ((option) == CURLOPT_ACCEPT_ENCODING || \ + (option) == CURLOPT_CAINFO || \ + (option) == CURLOPT_CAPATH || \ + (option) == CURLOPT_COOKIE || \ + (option) == CURLOPT_COOKIEFILE || \ + (option) == CURLOPT_COOKIEJAR || \ + (option) == CURLOPT_COOKIELIST || \ + (option) == CURLOPT_CRLFILE || \ + (option) == CURLOPT_CUSTOMREQUEST || \ + (option) == CURLOPT_DEFAULT_PROTOCOL || \ + (option) == CURLOPT_DNS_INTERFACE || \ + (option) == CURLOPT_DNS_LOCAL_IP4 || \ + (option) == CURLOPT_DNS_LOCAL_IP6 || \ + (option) == CURLOPT_DNS_SERVERS || \ + (option) == CURLOPT_EGDSOCKET || \ + (option) == CURLOPT_FTPPORT || \ + (option) == CURLOPT_FTP_ACCOUNT || \ + (option) == CURLOPT_FTP_ALTERNATIVE_TO_USER || \ + (option) == CURLOPT_INTERFACE || \ + (option) == CURLOPT_ISSUERCERT || \ + (option) == CURLOPT_KEYPASSWD || \ + (option) == CURLOPT_KRBLEVEL || \ + (option) == CURLOPT_LOGIN_OPTIONS || \ + (option) == CURLOPT_MAIL_AUTH || \ + (option) == CURLOPT_MAIL_FROM || \ + (option) == CURLOPT_NETRC_FILE || \ + (option) == CURLOPT_NOPROXY || \ + (option) == CURLOPT_PASSWORD || \ + (option) == CURLOPT_PINNEDPUBLICKEY || \ + (option) == CURLOPT_PROXY || \ + (option) == CURLOPT_PROXYPASSWORD || \ + (option) == CURLOPT_PROXYUSERNAME || \ + (option) == CURLOPT_PROXYUSERPWD || \ + (option) == CURLOPT_PROXY_SERVICE_NAME || \ + (option) == CURLOPT_RANDOM_FILE || \ + (option) == CURLOPT_RANGE || \ + (option) == CURLOPT_REFERER || \ + (option) == CURLOPT_RTSP_SESSION_ID || \ + (option) == CURLOPT_RTSP_STREAM_URI || \ + (option) == CURLOPT_RTSP_TRANSPORT || \ + (option) == CURLOPT_SERVICE_NAME || \ + (option) == CURLOPT_SOCKS5_GSSAPI_SERVICE || \ + (option) == CURLOPT_SSH_HOST_PUBLIC_KEY_MD5 || \ + (option) == CURLOPT_SSH_KNOWNHOSTS || \ + (option) == CURLOPT_SSH_PRIVATE_KEYFILE || \ + (option) == CURLOPT_SSH_PUBLIC_KEYFILE || \ + (option) == CURLOPT_SSLCERT || \ + (option) == CURLOPT_SSLCERTTYPE || \ + (option) == CURLOPT_SSLENGINE || \ + (option) == CURLOPT_SSLKEY || \ + (option) == CURLOPT_SSLKEYTYPE || \ + (option) == CURLOPT_SSL_CIPHER_LIST || \ + (option) == CURLOPT_TLSAUTH_PASSWORD || \ + (option) == CURLOPT_TLSAUTH_TYPE || \ + (option) == CURLOPT_TLSAUTH_USERNAME || \ + (option) == CURLOPT_UNIX_SOCKET_PATH || \ + (option) == CURLOPT_URL || \ + (option) == CURLOPT_USERAGENT || \ + (option) == CURLOPT_USERNAME || \ + (option) == CURLOPT_USERPWD || \ + (option) == CURLOPT_XOAUTH2_BEARER || \ + 0) + +/* evaluates to true if option takes a curl_write_callback argument */ +#define _curl_is_write_cb_option(option) \ + ((option) == CURLOPT_HEADERFUNCTION || \ + (option) == CURLOPT_WRITEFUNCTION) + +/* evaluates to true if option takes a curl_conv_callback argument */ +#define _curl_is_conv_cb_option(option) \ + ((option) == CURLOPT_CONV_TO_NETWORK_FUNCTION || \ + (option) == CURLOPT_CONV_FROM_NETWORK_FUNCTION || \ + (option) == CURLOPT_CONV_FROM_UTF8_FUNCTION) + +/* evaluates to true if option takes a data argument to pass to a callback */ +#define _curl_is_cb_data_option(option) \ + ((option) == CURLOPT_CHUNK_DATA || \ + (option) == CURLOPT_CLOSESOCKETDATA || \ + (option) == CURLOPT_DEBUGDATA || \ + (option) == CURLOPT_FNMATCH_DATA || \ + (option) == CURLOPT_HEADERDATA || \ + (option) == CURLOPT_INTERLEAVEDATA || \ + (option) == CURLOPT_IOCTLDATA || \ + (option) == CURLOPT_OPENSOCKETDATA || \ + (option) == CURLOPT_PRIVATE || \ + (option) == CURLOPT_PROGRESSDATA || \ + (option) == CURLOPT_READDATA || \ + (option) == CURLOPT_SEEKDATA || \ + (option) == CURLOPT_SOCKOPTDATA || \ + (option) == CURLOPT_SSH_KEYDATA || \ + (option) == CURLOPT_SSL_CTX_DATA || \ + (option) == CURLOPT_WRITEDATA || \ + 0) + +/* evaluates to true if option takes a POST data argument (void* or char*) */ +#define _curl_is_postfields_option(option) \ + ((option) == CURLOPT_POSTFIELDS || \ + (option) == CURLOPT_COPYPOSTFIELDS || \ + 0) + +/* evaluates to true if option takes a struct curl_slist * argument */ +#define _curl_is_slist_option(option) \ + ((option) == CURLOPT_HTTP200ALIASES || \ + (option) == CURLOPT_HTTPHEADER || \ + (option) == CURLOPT_MAIL_RCPT || \ + (option) == CURLOPT_POSTQUOTE || \ + (option) == CURLOPT_PREQUOTE || \ + (option) == CURLOPT_PROXYHEADER || \ + (option) == CURLOPT_QUOTE || \ + (option) == CURLOPT_RESOLVE || \ + (option) == CURLOPT_TELNETOPTIONS || \ + 0) + +/* groups of curl_easy_getinfo infos that take the same type of argument */ + +/* evaluates to true if info expects a pointer to char * argument */ +#define _curl_is_string_info(info) \ + (CURLINFO_STRING < (info) && (info) < CURLINFO_LONG) + +/* evaluates to true if info expects a pointer to long argument */ +#define _curl_is_long_info(info) \ + (CURLINFO_LONG < (info) && (info) < CURLINFO_DOUBLE) + +/* evaluates to true if info expects a pointer to double argument */ +#define _curl_is_double_info(info) \ + (CURLINFO_DOUBLE < (info) && (info) < CURLINFO_SLIST) + +/* true if info expects a pointer to struct curl_slist * argument */ +#define _curl_is_slist_info(info) \ + (CURLINFO_SLIST < (info)) + + +/* typecheck helpers -- check whether given expression has requested type*/ + +/* For pointers, you can use the _curl_is_ptr/_curl_is_arr macros, + * otherwise define a new macro. Search for __builtin_types_compatible_p + * in the GCC manual. + * NOTE: these macros MUST NOT EVALUATE their arguments! The argument is + * the actual expression passed to the curl_easy_setopt macro. This + * means that you can only apply the sizeof and __typeof__ operators, no + * == or whatsoever. + */ + +/* XXX: should evaluate to true iff expr is a pointer */ +#define _curl_is_any_ptr(expr) \ + (sizeof(expr) == sizeof(void *)) + +/* evaluates to true if expr is NULL */ +/* XXX: must not evaluate expr, so this check is not accurate */ +#define _curl_is_NULL(expr) \ + (__builtin_types_compatible_p(__typeof__(expr), __typeof__(NULL))) + +/* evaluates to true if expr is type*, const type* or NULL */ +#define _curl_is_ptr(expr, type) \ + (_curl_is_NULL(expr) || \ + __builtin_types_compatible_p(__typeof__(expr), type *) || \ + __builtin_types_compatible_p(__typeof__(expr), const type *)) + +/* evaluates to true if expr is one of type[], type*, NULL or const type* */ +#define _curl_is_arr(expr, type) \ + (_curl_is_ptr((expr), type) || \ + __builtin_types_compatible_p(__typeof__(expr), type [])) + +/* evaluates to true if expr is a string */ +#define _curl_is_string(expr) \ + (_curl_is_arr((expr), char) || \ + _curl_is_arr((expr), signed char) || \ + _curl_is_arr((expr), unsigned char)) + +/* evaluates to true if expr is a long (no matter the signedness) + * XXX: for now, int is also accepted (and therefore short and char, which + * are promoted to int when passed to a variadic function) */ +#define _curl_is_long(expr) \ + (__builtin_types_compatible_p(__typeof__(expr), long) || \ + __builtin_types_compatible_p(__typeof__(expr), signed long) || \ + __builtin_types_compatible_p(__typeof__(expr), unsigned long) || \ + __builtin_types_compatible_p(__typeof__(expr), int) || \ + __builtin_types_compatible_p(__typeof__(expr), signed int) || \ + __builtin_types_compatible_p(__typeof__(expr), unsigned int) || \ + __builtin_types_compatible_p(__typeof__(expr), short) || \ + __builtin_types_compatible_p(__typeof__(expr), signed short) || \ + __builtin_types_compatible_p(__typeof__(expr), unsigned short) || \ + __builtin_types_compatible_p(__typeof__(expr), char) || \ + __builtin_types_compatible_p(__typeof__(expr), signed char) || \ + __builtin_types_compatible_p(__typeof__(expr), unsigned char)) + +/* evaluates to true if expr is of type curl_off_t */ +#define _curl_is_off_t(expr) \ + (__builtin_types_compatible_p(__typeof__(expr), curl_off_t)) + +/* evaluates to true if expr is abuffer suitable for CURLOPT_ERRORBUFFER */ +/* XXX: also check size of an char[] array? */ +#define _curl_is_error_buffer(expr) \ + (_curl_is_NULL(expr) || \ + __builtin_types_compatible_p(__typeof__(expr), char *) || \ + __builtin_types_compatible_p(__typeof__(expr), char[])) + +/* evaluates to true if expr is of type (const) void* or (const) FILE* */ +#if 0 +#define _curl_is_cb_data(expr) \ + (_curl_is_ptr((expr), void) || \ + _curl_is_ptr((expr), FILE)) +#else /* be less strict */ +#define _curl_is_cb_data(expr) \ + _curl_is_any_ptr(expr) +#endif + +/* evaluates to true if expr is of type FILE* */ +#define _curl_is_FILE(expr) \ + (__builtin_types_compatible_p(__typeof__(expr), FILE *)) + +/* evaluates to true if expr can be passed as POST data (void* or char*) */ +#define _curl_is_postfields(expr) \ + (_curl_is_ptr((expr), void) || \ + _curl_is_arr((expr), char)) + +/* FIXME: the whole callback checking is messy... + * The idea is to tolerate char vs. void and const vs. not const + * pointers in arguments at least + */ +/* helper: __builtin_types_compatible_p distinguishes between functions and + * function pointers, hide it */ +#define _curl_callback_compatible(func, type) \ + (__builtin_types_compatible_p(__typeof__(func), type) || \ + __builtin_types_compatible_p(__typeof__(func), type*)) + +/* evaluates to true if expr is of type curl_read_callback or "similar" */ +#define _curl_is_read_cb(expr) \ + (_curl_is_NULL(expr) || \ + __builtin_types_compatible_p(__typeof__(expr), __typeof__(fread)) || \ + __builtin_types_compatible_p(__typeof__(expr), curl_read_callback) || \ + _curl_callback_compatible((expr), _curl_read_callback1) || \ + _curl_callback_compatible((expr), _curl_read_callback2) || \ + _curl_callback_compatible((expr), _curl_read_callback3) || \ + _curl_callback_compatible((expr), _curl_read_callback4) || \ + _curl_callback_compatible((expr), _curl_read_callback5) || \ + _curl_callback_compatible((expr), _curl_read_callback6)) +typedef size_t (_curl_read_callback1)(char *, size_t, size_t, void *); +typedef size_t (_curl_read_callback2)(char *, size_t, size_t, const void *); +typedef size_t (_curl_read_callback3)(char *, size_t, size_t, FILE *); +typedef size_t (_curl_read_callback4)(void *, size_t, size_t, void *); +typedef size_t (_curl_read_callback5)(void *, size_t, size_t, const void *); +typedef size_t (_curl_read_callback6)(void *, size_t, size_t, FILE *); + +/* evaluates to true if expr is of type curl_write_callback or "similar" */ +#define _curl_is_write_cb(expr) \ + (_curl_is_read_cb(expr) || \ + __builtin_types_compatible_p(__typeof__(expr), __typeof__(fwrite)) || \ + __builtin_types_compatible_p(__typeof__(expr), curl_write_callback) || \ + _curl_callback_compatible((expr), _curl_write_callback1) || \ + _curl_callback_compatible((expr), _curl_write_callback2) || \ + _curl_callback_compatible((expr), _curl_write_callback3) || \ + _curl_callback_compatible((expr), _curl_write_callback4) || \ + _curl_callback_compatible((expr), _curl_write_callback5) || \ + _curl_callback_compatible((expr), _curl_write_callback6)) +typedef size_t (_curl_write_callback1)(const char *, size_t, size_t, void *); +typedef size_t (_curl_write_callback2)(const char *, size_t, size_t, + const void *); +typedef size_t (_curl_write_callback3)(const char *, size_t, size_t, FILE *); +typedef size_t (_curl_write_callback4)(const void *, size_t, size_t, void *); +typedef size_t (_curl_write_callback5)(const void *, size_t, size_t, + const void *); +typedef size_t (_curl_write_callback6)(const void *, size_t, size_t, FILE *); + +/* evaluates to true if expr is of type curl_ioctl_callback or "similar" */ +#define _curl_is_ioctl_cb(expr) \ + (_curl_is_NULL(expr) || \ + __builtin_types_compatible_p(__typeof__(expr), curl_ioctl_callback) || \ + _curl_callback_compatible((expr), _curl_ioctl_callback1) || \ + _curl_callback_compatible((expr), _curl_ioctl_callback2) || \ + _curl_callback_compatible((expr), _curl_ioctl_callback3) || \ + _curl_callback_compatible((expr), _curl_ioctl_callback4)) +typedef curlioerr (_curl_ioctl_callback1)(CURL *, int, void *); +typedef curlioerr (_curl_ioctl_callback2)(CURL *, int, const void *); +typedef curlioerr (_curl_ioctl_callback3)(CURL *, curliocmd, void *); +typedef curlioerr (_curl_ioctl_callback4)(CURL *, curliocmd, const void *); + +/* evaluates to true if expr is of type curl_sockopt_callback or "similar" */ +#define _curl_is_sockopt_cb(expr) \ + (_curl_is_NULL(expr) || \ + __builtin_types_compatible_p(__typeof__(expr), curl_sockopt_callback) || \ + _curl_callback_compatible((expr), _curl_sockopt_callback1) || \ + _curl_callback_compatible((expr), _curl_sockopt_callback2)) +typedef int (_curl_sockopt_callback1)(void *, curl_socket_t, curlsocktype); +typedef int (_curl_sockopt_callback2)(const void *, curl_socket_t, + curlsocktype); + +/* evaluates to true if expr is of type curl_opensocket_callback or + "similar" */ +#define _curl_is_opensocket_cb(expr) \ + (_curl_is_NULL(expr) || \ + __builtin_types_compatible_p(__typeof__(expr), curl_opensocket_callback) ||\ + _curl_callback_compatible((expr), _curl_opensocket_callback1) || \ + _curl_callback_compatible((expr), _curl_opensocket_callback2) || \ + _curl_callback_compatible((expr), _curl_opensocket_callback3) || \ + _curl_callback_compatible((expr), _curl_opensocket_callback4)) +typedef curl_socket_t (_curl_opensocket_callback1) + (void *, curlsocktype, struct curl_sockaddr *); +typedef curl_socket_t (_curl_opensocket_callback2) + (void *, curlsocktype, const struct curl_sockaddr *); +typedef curl_socket_t (_curl_opensocket_callback3) + (const void *, curlsocktype, struct curl_sockaddr *); +typedef curl_socket_t (_curl_opensocket_callback4) + (const void *, curlsocktype, const struct curl_sockaddr *); + +/* evaluates to true if expr is of type curl_progress_callback or "similar" */ +#define _curl_is_progress_cb(expr) \ + (_curl_is_NULL(expr) || \ + __builtin_types_compatible_p(__typeof__(expr), curl_progress_callback) || \ + _curl_callback_compatible((expr), _curl_progress_callback1) || \ + _curl_callback_compatible((expr), _curl_progress_callback2)) +typedef int (_curl_progress_callback1)(void *, + double, double, double, double); +typedef int (_curl_progress_callback2)(const void *, + double, double, double, double); + +/* evaluates to true if expr is of type curl_debug_callback or "similar" */ +#define _curl_is_debug_cb(expr) \ + (_curl_is_NULL(expr) || \ + __builtin_types_compatible_p(__typeof__(expr), curl_debug_callback) || \ + _curl_callback_compatible((expr), _curl_debug_callback1) || \ + _curl_callback_compatible((expr), _curl_debug_callback2) || \ + _curl_callback_compatible((expr), _curl_debug_callback3) || \ + _curl_callback_compatible((expr), _curl_debug_callback4) || \ + _curl_callback_compatible((expr), _curl_debug_callback5) || \ + _curl_callback_compatible((expr), _curl_debug_callback6) || \ + _curl_callback_compatible((expr), _curl_debug_callback7) || \ + _curl_callback_compatible((expr), _curl_debug_callback8)) +typedef int (_curl_debug_callback1) (CURL *, + curl_infotype, char *, size_t, void *); +typedef int (_curl_debug_callback2) (CURL *, + curl_infotype, char *, size_t, const void *); +typedef int (_curl_debug_callback3) (CURL *, + curl_infotype, const char *, size_t, void *); +typedef int (_curl_debug_callback4) (CURL *, + curl_infotype, const char *, size_t, const void *); +typedef int (_curl_debug_callback5) (CURL *, + curl_infotype, unsigned char *, size_t, void *); +typedef int (_curl_debug_callback6) (CURL *, + curl_infotype, unsigned char *, size_t, const void *); +typedef int (_curl_debug_callback7) (CURL *, + curl_infotype, const unsigned char *, size_t, void *); +typedef int (_curl_debug_callback8) (CURL *, + curl_infotype, const unsigned char *, size_t, const void *); + +/* evaluates to true if expr is of type curl_ssl_ctx_callback or "similar" */ +/* this is getting even messier... */ +#define _curl_is_ssl_ctx_cb(expr) \ + (_curl_is_NULL(expr) || \ + __builtin_types_compatible_p(__typeof__(expr), curl_ssl_ctx_callback) || \ + _curl_callback_compatible((expr), _curl_ssl_ctx_callback1) || \ + _curl_callback_compatible((expr), _curl_ssl_ctx_callback2) || \ + _curl_callback_compatible((expr), _curl_ssl_ctx_callback3) || \ + _curl_callback_compatible((expr), _curl_ssl_ctx_callback4) || \ + _curl_callback_compatible((expr), _curl_ssl_ctx_callback5) || \ + _curl_callback_compatible((expr), _curl_ssl_ctx_callback6) || \ + _curl_callback_compatible((expr), _curl_ssl_ctx_callback7) || \ + _curl_callback_compatible((expr), _curl_ssl_ctx_callback8)) +typedef CURLcode (_curl_ssl_ctx_callback1)(CURL *, void *, void *); +typedef CURLcode (_curl_ssl_ctx_callback2)(CURL *, void *, const void *); +typedef CURLcode (_curl_ssl_ctx_callback3)(CURL *, const void *, void *); +typedef CURLcode (_curl_ssl_ctx_callback4)(CURL *, const void *, const void *); +#ifdef HEADER_SSL_H +/* hack: if we included OpenSSL's ssl.h, we know about SSL_CTX + * this will of course break if we're included before OpenSSL headers... + */ +typedef CURLcode (_curl_ssl_ctx_callback5)(CURL *, SSL_CTX, void *); +typedef CURLcode (_curl_ssl_ctx_callback6)(CURL *, SSL_CTX, const void *); +typedef CURLcode (_curl_ssl_ctx_callback7)(CURL *, const SSL_CTX, void *); +typedef CURLcode (_curl_ssl_ctx_callback8)(CURL *, const SSL_CTX, + const void *); +#else +typedef _curl_ssl_ctx_callback1 _curl_ssl_ctx_callback5; +typedef _curl_ssl_ctx_callback1 _curl_ssl_ctx_callback6; +typedef _curl_ssl_ctx_callback1 _curl_ssl_ctx_callback7; +typedef _curl_ssl_ctx_callback1 _curl_ssl_ctx_callback8; +#endif + +/* evaluates to true if expr is of type curl_conv_callback or "similar" */ +#define _curl_is_conv_cb(expr) \ + (_curl_is_NULL(expr) || \ + __builtin_types_compatible_p(__typeof__(expr), curl_conv_callback) || \ + _curl_callback_compatible((expr), _curl_conv_callback1) || \ + _curl_callback_compatible((expr), _curl_conv_callback2) || \ + _curl_callback_compatible((expr), _curl_conv_callback3) || \ + _curl_callback_compatible((expr), _curl_conv_callback4)) +typedef CURLcode (*_curl_conv_callback1)(char *, size_t length); +typedef CURLcode (*_curl_conv_callback2)(const char *, size_t length); +typedef CURLcode (*_curl_conv_callback3)(void *, size_t length); +typedef CURLcode (*_curl_conv_callback4)(const void *, size_t length); + +/* evaluates to true if expr is of type curl_seek_callback or "similar" */ +#define _curl_is_seek_cb(expr) \ + (_curl_is_NULL(expr) || \ + __builtin_types_compatible_p(__typeof__(expr), curl_seek_callback) || \ + _curl_callback_compatible((expr), _curl_seek_callback1) || \ + _curl_callback_compatible((expr), _curl_seek_callback2)) +typedef CURLcode (*_curl_seek_callback1)(void *, curl_off_t, int); +typedef CURLcode (*_curl_seek_callback2)(const void *, curl_off_t, int); + + +#endif /* __CURL_TYPECHECK_GCC_H */ diff --git a/win_lib/lib/libcurl.a b/win_lib/lib/libcurl.a new file mode 100644 index 000000000..845b4b26c Binary files /dev/null and b/win_lib/lib/libcurl.a differ diff --git a/win_lib/lib/libcurl.dll.a b/win_lib/lib/libcurl.dll.a new file mode 100755 index 000000000..39c3a7527 Binary files /dev/null and b/win_lib/lib/libcurl.dll.a differ diff --git a/win_lib/lib/libcurl.la b/win_lib/lib/libcurl.la new file mode 100755 index 000000000..f8dd7f3a1 --- /dev/null +++ b/win_lib/lib/libcurl.la @@ -0,0 +1,41 @@ +# libcurl.la - a libtool library file +# Generated by libtool (GNU libtool) 2.4.6 Debian-2.4.6-2 +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='' + +# Names of this library. +library_names='' + +# The name of the static archive. +old_library='libcurl.a' + +# Linker flags that cannot go in dependency_libs. +inherited_linker_flags='' + +# Libraries that this one depends upon. +dependency_libs=' -L/home/ca/Schreibtisch/supernet/crypto777/curl-7.52.1/openssl-1.1.0e/dist/lib -lssl -lcrypto -lgdi32 -lwldap32 -lws2_32' + +# Names of additional weak libraries provided by this library +weak_library_names='' + +# Version information for libcurl. +current=8 +age=4 +revision=0 + +# Is this an already installed library? +installed=yes + +# Should we warn about portability when linking against -modules? +shouldnotlink=no + +# Files to dlopen/dlpreopen +dlopen='' +dlpreopen='' + +# Directory that this library needs to be installed in: +libdir='/home/ca/Schreibtisch/supernet/crypto777/curl-7.52.1/win_lib/lib' diff --git a/win_lib/lib/pkgconfig/libcurl.pc b/win_lib/lib/pkgconfig/libcurl.pc new file mode 100644 index 000000000..f4f22700c --- /dev/null +++ b/win_lib/lib/pkgconfig/libcurl.pc @@ -0,0 +1,39 @@ +#*************************************************************************** +# _ _ ____ _ +# Project ___| | | | _ \| | +# / __| | | | |_) | | +# | (__| |_| | _ <| |___ +# \___|\___/|_| \_\_____| +# +# Copyright (C) 1998 - 2012, Daniel Stenberg, , et al. +# +# This software is licensed as described in the file COPYING, which +# you should have received as part of this distribution. The terms +# are also available at https://curl.haxx.se/docs/copyright.html. +# +# You may opt to use, copy, modify, merge, publish, distribute and/or sell +# copies of the Software, and permit persons to whom the Software is +# furnished to do so, under the terms of the COPYING file. +# +# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY +# KIND, either express or implied. +# +########################################################################### + +# This should most probably benefit from getting a "Requires:" field added +# dynamically by configure. +# +prefix=/home/ca/Schreibtisch/supernet/crypto777/curl-7.52.1/win_lib +exec_prefix=${prefix} +libdir=${exec_prefix}/lib +includedir=${prefix}/include +supported_protocols="DICT FILE FTP FTPS GOPHER HTTP HTTPS IMAP IMAPS LDAP LDAPS POP3 POP3S RTSP SMB SMBS SMTP SMTPS TELNET TFTP" +supported_features="SSL IPv6 NTLM TLS-SRP HTTPS-proxy" + +Name: libcurl +URL: https://curl.haxx.se/ +Description: Library to transfer files with ftp, http, etc. +Version: 7.52.1 +Libs: -L${libdir} -lcurl +Libs.private: -lssl -lcrypto -lssl -lcrypto -lgdi32 -lwldap32 -lws2_32 +Cflags: -I${includedir} -DCURL_STATICLIB diff --git a/win_lib/share/aclocal/libcurl.m4 b/win_lib/share/aclocal/libcurl.m4 new file mode 100644 index 000000000..53d694d0a --- /dev/null +++ b/win_lib/share/aclocal/libcurl.m4 @@ -0,0 +1,272 @@ +#*************************************************************************** +# _ _ ____ _ +# Project ___| | | | _ \| | +# / __| | | | |_) | | +# | (__| |_| | _ <| |___ +# \___|\___/|_| \_\_____| +# +# Copyright (C) 2006, David Shaw +# +# This software is licensed as described in the file COPYING, which +# you should have received as part of this distribution. The terms +# are also available at https://curl.haxx.se/docs/copyright.html. +# +# You may opt to use, copy, modify, merge, publish, distribute and/or sell +# copies of the Software, and permit persons to whom the Software is +# furnished to do so, under the terms of the COPYING file. +# +# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY +# KIND, either express or implied. +# +########################################################################### +# LIBCURL_CHECK_CONFIG ([DEFAULT-ACTION], [MINIMUM-VERSION], +# [ACTION-IF-YES], [ACTION-IF-NO]) +# ---------------------------------------------------------- +# David Shaw May-09-2006 +# +# Checks for libcurl. DEFAULT-ACTION is the string yes or no to +# specify whether to default to --with-libcurl or --without-libcurl. +# If not supplied, DEFAULT-ACTION is yes. MINIMUM-VERSION is the +# minimum version of libcurl to accept. Pass the version as a regular +# version number like 7.10.1. If not supplied, any version is +# accepted. ACTION-IF-YES is a list of shell commands to run if +# libcurl was successfully found and passed the various tests. +# ACTION-IF-NO is a list of shell commands that are run otherwise. +# Note that using --without-libcurl does run ACTION-IF-NO. +# +# This macro #defines HAVE_LIBCURL if a working libcurl setup is +# found, and sets @LIBCURL@ and @LIBCURL_CPPFLAGS@ to the necessary +# values. Other useful defines are LIBCURL_FEATURE_xxx where xxx are +# the various features supported by libcurl, and LIBCURL_PROTOCOL_yyy +# where yyy are the various protocols supported by libcurl. Both xxx +# and yyy are capitalized. See the list of AH_TEMPLATEs at the top of +# the macro for the complete list of possible defines. Shell +# variables $libcurl_feature_xxx and $libcurl_protocol_yyy are also +# defined to 'yes' for those features and protocols that were found. +# Note that xxx and yyy keep the same capitalization as in the +# curl-config list (e.g. it's "HTTP" and not "http"). +# +# Users may override the detected values by doing something like: +# LIBCURL="-lcurl" LIBCURL_CPPFLAGS="-I/usr/myinclude" ./configure +# +# For the sake of sanity, this macro assumes that any libcurl that is +# found is after version 7.7.2, the first version that included the +# curl-config script. Note that it is very important for people +# packaging binary versions of libcurl to include this script! +# Without curl-config, we can only guess what protocols are available, +# or use curl_version_info to figure it out at runtime. + +AC_DEFUN([LIBCURL_CHECK_CONFIG], +[ + AH_TEMPLATE([LIBCURL_FEATURE_SSL],[Defined if libcurl supports SSL]) + AH_TEMPLATE([LIBCURL_FEATURE_KRB4],[Defined if libcurl supports KRB4]) + AH_TEMPLATE([LIBCURL_FEATURE_IPV6],[Defined if libcurl supports IPv6]) + AH_TEMPLATE([LIBCURL_FEATURE_LIBZ],[Defined if libcurl supports libz]) + AH_TEMPLATE([LIBCURL_FEATURE_ASYNCHDNS],[Defined if libcurl supports AsynchDNS]) + AH_TEMPLATE([LIBCURL_FEATURE_IDN],[Defined if libcurl supports IDN]) + AH_TEMPLATE([LIBCURL_FEATURE_SSPI],[Defined if libcurl supports SSPI]) + AH_TEMPLATE([LIBCURL_FEATURE_NTLM],[Defined if libcurl supports NTLM]) + + AH_TEMPLATE([LIBCURL_PROTOCOL_HTTP],[Defined if libcurl supports HTTP]) + AH_TEMPLATE([LIBCURL_PROTOCOL_HTTPS],[Defined if libcurl supports HTTPS]) + AH_TEMPLATE([LIBCURL_PROTOCOL_FTP],[Defined if libcurl supports FTP]) + AH_TEMPLATE([LIBCURL_PROTOCOL_FTPS],[Defined if libcurl supports FTPS]) + AH_TEMPLATE([LIBCURL_PROTOCOL_FILE],[Defined if libcurl supports FILE]) + AH_TEMPLATE([LIBCURL_PROTOCOL_TELNET],[Defined if libcurl supports TELNET]) + AH_TEMPLATE([LIBCURL_PROTOCOL_LDAP],[Defined if libcurl supports LDAP]) + AH_TEMPLATE([LIBCURL_PROTOCOL_DICT],[Defined if libcurl supports DICT]) + AH_TEMPLATE([LIBCURL_PROTOCOL_TFTP],[Defined if libcurl supports TFTP]) + AH_TEMPLATE([LIBCURL_PROTOCOL_RTSP],[Defined if libcurl supports RTSP]) + AH_TEMPLATE([LIBCURL_PROTOCOL_POP3],[Defined if libcurl supports POP3]) + AH_TEMPLATE([LIBCURL_PROTOCOL_IMAP],[Defined if libcurl supports IMAP]) + AH_TEMPLATE([LIBCURL_PROTOCOL_SMTP],[Defined if libcurl supports SMTP]) + + AC_ARG_WITH(libcurl, + AS_HELP_STRING([--with-libcurl=PREFIX],[look for the curl library in PREFIX/lib and headers in PREFIX/include]), + [_libcurl_with=$withval],[_libcurl_with=ifelse([$1],,[yes],[$1])]) + + if test "$_libcurl_with" != "no" ; then + + AC_PROG_AWK + + _libcurl_version_parse="eval $AWK '{split(\$NF,A,\".\"); X=256*256*A[[1]]+256*A[[2]]+A[[3]]; print X;}'" + + _libcurl_try_link=yes + + if test -d "$_libcurl_with" ; then + LIBCURL_CPPFLAGS="-I$withval/include" + _libcurl_ldflags="-L$withval/lib" + AC_PATH_PROG([_libcurl_config],[curl-config],[], + ["$withval/bin"]) + else + AC_PATH_PROG([_libcurl_config],[curl-config],[],[$PATH]) + fi + + if test x$_libcurl_config != "x" ; then + AC_CACHE_CHECK([for the version of libcurl], + [libcurl_cv_lib_curl_version], + [libcurl_cv_lib_curl_version=`$_libcurl_config --version | $AWK '{print $[]2}'`]) + + _libcurl_version=`echo $libcurl_cv_lib_curl_version | $_libcurl_version_parse` + _libcurl_wanted=`echo ifelse([$2],,[0],[$2]) | $_libcurl_version_parse` + + if test $_libcurl_wanted -gt 0 ; then + AC_CACHE_CHECK([for libcurl >= version $2], + [libcurl_cv_lib_version_ok], + [ + if test $_libcurl_version -ge $_libcurl_wanted ; then + libcurl_cv_lib_version_ok=yes + else + libcurl_cv_lib_version_ok=no + fi + ]) + fi + + if test $_libcurl_wanted -eq 0 || test x$libcurl_cv_lib_version_ok = xyes ; then + if test x"$LIBCURL_CPPFLAGS" = "x" ; then + LIBCURL_CPPFLAGS=`$_libcurl_config --cflags` + fi + if test x"$LIBCURL" = "x" ; then + LIBCURL=`$_libcurl_config --libs` + + # This is so silly, but Apple actually has a bug in their + # curl-config script. Fixed in Tiger, but there are still + # lots of Panther installs around. + case "${host}" in + powerpc-apple-darwin7*) + LIBCURL=`echo $LIBCURL | sed -e 's|-arch i386||g'` + ;; + esac + fi + + # All curl-config scripts support --feature + _libcurl_features=`$_libcurl_config --feature` + + # Is it modern enough to have --protocols? (7.12.4) + if test $_libcurl_version -ge 461828 ; then + _libcurl_protocols=`$_libcurl_config --protocols` + fi + else + _libcurl_try_link=no + fi + + unset _libcurl_wanted + fi + + if test $_libcurl_try_link = yes ; then + + # we didn't find curl-config, so let's see if the user-supplied + # link line (or failing that, "-lcurl") is enough. + LIBCURL=${LIBCURL-"$_libcurl_ldflags -lcurl"} + + AC_CACHE_CHECK([whether libcurl is usable], + [libcurl_cv_lib_curl_usable], + [ + _libcurl_save_cppflags=$CPPFLAGS + CPPFLAGS="$LIBCURL_CPPFLAGS $CPPFLAGS" + _libcurl_save_libs=$LIBS + LIBS="$LIBCURL $LIBS" + + AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include ]],[[ +/* Try and use a few common options to force a failure if we are + missing symbols or can't link. */ +int x; +curl_easy_setopt(NULL,CURLOPT_URL,NULL); +x=CURL_ERROR_SIZE; +x=CURLOPT_WRITEFUNCTION; +x=CURLOPT_WRITEDATA; +x=CURLOPT_ERRORBUFFER; +x=CURLOPT_STDERR; +x=CURLOPT_VERBOSE; +if (x) {;} +]])],libcurl_cv_lib_curl_usable=yes,libcurl_cv_lib_curl_usable=no) + + CPPFLAGS=$_libcurl_save_cppflags + LIBS=$_libcurl_save_libs + unset _libcurl_save_cppflags + unset _libcurl_save_libs + ]) + + if test $libcurl_cv_lib_curl_usable = yes ; then + + # Does curl_free() exist in this version of libcurl? + # If not, fake it with free() + + _libcurl_save_cppflags=$CPPFLAGS + CPPFLAGS="$CPPFLAGS $LIBCURL_CPPFLAGS" + _libcurl_save_libs=$LIBS + LIBS="$LIBS $LIBCURL" + + AC_CHECK_FUNC(curl_free,, + AC_DEFINE(curl_free,free, + [Define curl_free() as free() if our version of curl lacks curl_free.])) + + CPPFLAGS=$_libcurl_save_cppflags + LIBS=$_libcurl_save_libs + unset _libcurl_save_cppflags + unset _libcurl_save_libs + + AC_DEFINE(HAVE_LIBCURL,1, + [Define to 1 if you have a functional curl library.]) + AC_SUBST(LIBCURL_CPPFLAGS) + AC_SUBST(LIBCURL) + + for _libcurl_feature in $_libcurl_features ; do + AC_DEFINE_UNQUOTED(AS_TR_CPP(libcurl_feature_$_libcurl_feature),[1]) + eval AS_TR_SH(libcurl_feature_$_libcurl_feature)=yes + done + + if test "x$_libcurl_protocols" = "x" ; then + + # We don't have --protocols, so just assume that all + # protocols are available + _libcurl_protocols="HTTP FTP FILE TELNET LDAP DICT TFTP" + + if test x$libcurl_feature_SSL = xyes ; then + _libcurl_protocols="$_libcurl_protocols HTTPS" + + # FTPS wasn't standards-compliant until version + # 7.11.0 (0x070b00 == 461568) + if test $_libcurl_version -ge 461568; then + _libcurl_protocols="$_libcurl_protocols FTPS" + fi + fi + + # RTSP, IMAP, POP3 and SMTP were added in + # 7.20.0 (0x071400 == 463872) + if test $_libcurl_version -ge 463872; then + _libcurl_protocols="$_libcurl_protocols RTSP IMAP POP3 SMTP" + fi + fi + + for _libcurl_protocol in $_libcurl_protocols ; do + AC_DEFINE_UNQUOTED(AS_TR_CPP(libcurl_protocol_$_libcurl_protocol),[1]) + eval AS_TR_SH(libcurl_protocol_$_libcurl_protocol)=yes + done + else + unset LIBCURL + unset LIBCURL_CPPFLAGS + fi + fi + + unset _libcurl_try_link + unset _libcurl_version_parse + unset _libcurl_config + unset _libcurl_feature + unset _libcurl_features + unset _libcurl_protocol + unset _libcurl_protocols + unset _libcurl_version + unset _libcurl_ldflags + fi + + if test x$_libcurl_with = xno || test x$libcurl_cv_lib_curl_usable != xyes ; then + # This is the IF-NO path + ifelse([$4],,:,[$4]) + else + # This is the IF-YES path + ifelse([$3],,:,[$3]) + fi + + unset _libcurl_with +])dnl diff --git a/win_lib/share/man/man1/curl-config.1 b/win_lib/share/man/man1/curl-config.1 new file mode 100644 index 000000000..4c1e323c6 --- /dev/null +++ b/win_lib/share/man/man1/curl-config.1 @@ -0,0 +1,98 @@ +.\" ************************************************************************** +.\" * _ _ ____ _ +.\" * Project ___| | | | _ \| | +.\" * / __| | | | |_) | | +.\" * | (__| |_| | _ <| |___ +.\" * \___|\___/|_| \_\_____| +.\" * +.\" * Copyright (C) 1998 - 2012, Daniel Stenberg, , et al. +.\" * +.\" * This software is licensed as described in the file COPYING, which +.\" * you should have received as part of this distribution. The terms +.\" * are also available at https://curl.haxx.se/docs/copyright.html. +.\" * +.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell +.\" * copies of the Software, and permit persons to whom the Software is +.\" * furnished to do so, under the terms of the COPYING file. +.\" * +.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY +.\" * KIND, either express or implied. +.\" * +.\" ************************************************************************** +.\" +.TH curl-config 1 "25 Oct 2007" "Curl 7.17.1" "curl-config manual" +.SH NAME +curl-config \- Get information about a libcurl installation +.SH SYNOPSIS +.B curl-config [options] +.SH DESCRIPTION +.B curl-config +displays information about the curl and libcurl installation. +.SH OPTIONS +.IP "--ca" +Displays the built-in path to the CA cert bundle this libcurl uses. +.IP "--cc" +Displays the compiler used to build libcurl. +.IP "--cflags" +Set of compiler options (CFLAGS) to use when compiling files that use +libcurl. Currently that is only the include path to the curl include files. +.IP "--checkfor [version]" +Specify the oldest possible libcurl version string you want, and this +script will return 0 if the current installation is new enough or it +returns 1 and outputs a text saying that the current version is not new +enough. (Added in 7.15.4) +.IP "--configure" +Displays the arguments given to configure when building curl. +.IP "--feature" +Lists what particular main features the installed libcurl was built with. At +the time of writing, this list may include SSL, KRB4 or IPv6. Do not assume +any particular order. The keywords will be separated by newlines. There may be +none, one, or several keywords in the list. +.IP "--help" +Displays the available options. +.IP "--libs" +Shows the complete set of libs and other linker options you will need in order +to link your application with libcurl. +.IP "--prefix" +This is the prefix used when libcurl was installed. Libcurl is then installed +in $prefix/lib and its header files are installed in $prefix/include and so +on. The prefix is set with "configure --prefix". +.IP "--protocols" +Lists what particular protocols the installed libcurl was built to support. At +the time of writing, this list may include HTTP, HTTPS, FTP, FTPS, FILE, +TELNET, LDAP, DICT. Do not assume any particular order. The protocols will +be listed using uppercase and are separated by newlines. There may be none, +one, or several protocols in the list. (Added in 7.13.0) +.IP "--static-libs" +Shows the complete set of libs and other linker options you will need in order +to link your application with libcurl statically. (Added in 7.17.1) +.IP "--version" +Outputs version information about the installed libcurl. +.IP "--vernum" +Outputs version information about the installed libcurl, in numerical mode. +This outputs the version number, in hexadecimal, with 8 bits for each part; +major, minor, patch. So that libcurl 7.7.4 would appear as 070704 and libcurl +12.13.14 would appear as 0c0d0e... Note that the initial zero might be +omitted. (This option was broken in the 7.15.0 release.) +.SH "EXAMPLES" +What linker options do I need when I link with libcurl? + + $ curl-config --libs + +What compiler options do I need when I compile using libcurl functions? + + $ curl-config --cflags + +How do I know if libcurl was built with SSL support? + + $ curl-config --feature | grep SSL + +What's the installed libcurl version? + + $ curl-config --version + +How do I build a single file with a one-line command? + + $ `curl-config --cc --cflags` -o example example.c `curl-config --libs` +.SH "SEE ALSO" +.BR curl (1) diff --git a/win_lib/share/man/man1/curl.1 b/win_lib/share/man/man1/curl.1 new file mode 100644 index 000000000..5866ba908 --- /dev/null +++ b/win_lib/share/man/man1/curl.1 @@ -0,0 +1,2668 @@ +.\" ************************************************************************** +.\" * _ _ ____ _ +.\" * Project ___| | | | _ \| | +.\" * / __| | | | |_) | | +.\" * | (__| |_| | _ <| |___ +.\" * \___|\___/|_| \_\_____| +.\" * +.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, , et al. +.\" * +.\" * This software is licensed as described in the file COPYING, which +.\" * you should have received as part of this distribution. The terms +.\" * are also available at https://curl.haxx.se/docs/copyright.html. +.\" * +.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell +.\" * copies of the Software, and permit persons to whom the Software is +.\" * furnished to do so, under the terms of the COPYING file. +.\" * +.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY +.\" * KIND, either express or implied. +.\" * +.\" ************************************************************************** +.\" +.\" DO NOT EDIT. Generated by the curl project gen.pl man page generator. +.\" +.TH curl 1 "16 Dec 2016" "Curl 7.52.0" "Curl Manual" +.SH NAME +curl \- transfer a URL +.SH SYNOPSIS +.B curl [options] +.I [URL...] +.SH DESCRIPTION +.B curl +is a tool to transfer data from or to a server, using one of the supported +protocols (DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, +LDAPS, POP3, POP3S, RTMP, RTSP, SCP, SFTP, SMB, SMBS, SMTP, SMTPS, TELNET +and TFTP). The command is designed to work without user interaction. + +curl offers a busload of useful tricks like proxy support, user +authentication, FTP upload, HTTP post, SSL connections, cookies, file transfer +resume, Metalink, and more. As you will see below, the number of features will +make your head spin! + +curl is powered by libcurl for all transfer-related features. See +\fIlibcurl(3)\fP for details. +.SH URL +The URL syntax is protocol-dependent. You'll find a detailed description in +RFC 3986. + +You can specify multiple URLs or parts of URLs by writing part sets within +braces as in: + + http://site.{one,two,three}.com + +or you can get sequences of alphanumeric series by using [] as in: + + ftp://ftp.example.com/file[1-100].txt + + ftp://ftp.example.com/file[001-100].txt (with leading zeros) + + ftp://ftp.example.com/file[a-z].txt + +Nested sequences are not supported, but you can use several ones next to each +other: + + http://example.com/archive[1996-1999]/vol[1-4]/part{a,b,c}.html + +You can specify any amount of URLs on the command line. They will be fetched +in a sequential manner in the specified order. + +You can specify a step counter for the ranges to get every Nth number or +letter: + + http://example.com/file[1-100:10].txt + + http://example.com/file[a-z:2].txt + +When using [] or {} sequences when invoked from a command line prompt, you +probably have to put the full URL within double quotes to avoid the shell from +interfering with it. This also goes for other characters treated special, like +for example '&', '?' and '*'. + +Provide the IPv6 zone index in the URL with an escaped percentage sign and the +interface name. Like in + + http://[fe80::3%25eth0]/ + +If you specify URL without protocol:// prefix, curl will attempt to guess what +protocol you might want. It will then default to HTTP but try other protocols +based on often-used host name prefixes. For example, for host names starting +with "ftp." curl will assume you want to speak FTP. + +curl will do its best to use what you pass to it as a URL. It is not trying to +validate it as a syntactically correct URL by any means but is instead +\fBvery\fP liberal with what it accepts. + +curl will attempt to re-use connections for multiple file transfers, so that +getting many files from the same server will not do multiple connects / +handshakes. This improves speed. Of course this is only done on files +specified on a single command line and cannot be used between separate curl +invokes. +.SH "PROGRESS METER" +curl normally displays a progress meter during operations, indicating the +amount of transferred data, transfer speeds and estimated time left, etc. The +progress meter displays number of bytes and the speeds are in bytes per +second. The suffixes (k, M, G, T, P) are 1024 based. For example 1k is 1024 +bytes. 1M is 1048576 bytes. + +curl displays this data to the terminal by default, so if you invoke curl to +do an operation and it is about to write data to the terminal, it +\fIdisables\fP the progress meter as otherwise it would mess up the output +mixing progress meter and response data. + +If you want a progress meter for HTTP POST or PUT requests, you need to +redirect the response output to a file, using shell redirect (>), -o [file] or +similar. + +It is not the same case for FTP upload as that operation does not spit out +any response data to the terminal. + +If you prefer a progress "bar" instead of the regular meter, \fI-#, --progress-bar\fP is +your friend. +.SH OPTIONS +Options start with one or two dashes. Many of the options require an +additional value next to them. + +The short "single-dash" form of the options, -d for example, may be used with +or without a space between it and its value, although a space is a recommended +separator. The long "double-dash" form, \fI-d, --data\fP for example, requires a space +between it and its value. + +Short version options that don't need any additional values can be used +immediately next to each other, like for example you can specify all the +options -O, -L and -v at once as -OLv. + +In general, all boolean options are enabled with --\fBoption\fP and yet again +disabled with --\fBno-\fPoption. That is, you use the exact same option name +but prefix it with "no-". However, in this list we mostly only list and show +the --option version of them. (This concept with --no options was added in +7.19.0. Previously most options were toggled on/off on repeated use of the +same command line option.) +.IP "--anyauth" +(HTTP) Tells curl to figure out authentication method by itself, and use the most +secure one the remote site claims to support. This is done by first doing a +request and checking the response-headers, thus possibly inducing an extra +network round-trip. This is used instead of setting a specific authentication +method, which you can do with \fI--basic\fP, \fI--digest\fP, \fI--ntlm\fP, and \fI--negotiate\fP. + +Using \fI--anyauth\fP is not recommended if you do uploads from stdin, since it may +require data to be sent twice and then the client must be able to rewind. If +the need should arise when uploading from stdin, the upload operation will +fail. + +Used together with \fI-u, --user\fP. + +See also \fI--proxy-anyauth\fP and \fI--basic\fP and \fI--digest\fP. +.IP "-a, --append" +(FTP SFTP) When used in an upload, this makes curl append to the target file instead of +overwriting it. If the remote file doesn't exist, it will be created. Note +that this flag is ignored by some SFTP servers (including OpenSSH). +.IP "--basic" +(HTTP) Tells curl to use HTTP Basic authentication with the remote host. This is the +default and this option is usually pointless, unless you use it to override a +previously set option that sets a different authentication method (such as +\fI--ntlm\fP, \fI--digest\fP, or \fI--negotiate\fP). + +Used together with \fI-u, --user\fP. + +See also \fI--proxy-basic\fP. +.IP "--cacert " +(TLS) Tells curl to use the specified certificate file to verify the peer. The file +may contain multiple CA certificates. The certificate(s) must be in PEM +format. Normally curl is built to use a default file for this, so this option +is typically used to alter that default file. + +curl recognizes the environment variable named 'CURL_CA_BUNDLE' if it is +set, and uses the given path as a path to a CA cert bundle. This option +overrides that variable. + +The windows version of curl will automatically look for a CA certs file named +\'curl-ca-bundle.crt\', either in the same directory as curl.exe, or in the +Current Working Directory, or in any folder along your PATH. + +If curl is built against the NSS SSL library, the NSS PEM PKCS#11 module +(libnsspem.so) needs to be available for this option to work properly. + +(iOS and macOS only) If curl is built against Secure Transport, then this +option is supported for backward compatibility with other SSL engines, but it +should not be set. If the option is not set, then curl will use the +certificates in the system and user Keychain to verify the peer, which is the +preferred method of verifying the peer's certificate chain. + +If this option is used several times, the last one will be used. +.IP "--capath " +(TLS) Tells curl to use the specified certificate directory to verify the +peer. Multiple paths can be provided by separating them with ":" (e.g. +\&"path1:path2:path3"). The certificates must be in PEM format, and if curl is +built against OpenSSL, the directory must have been processed using the +c_rehash utility supplied with OpenSSL. Using \fI--capath\fP can allow +OpenSSL-powered curl to make SSL-connections much more efficiently than using +\fI--cacert\fP if the --cacert file contains many CA certificates. + +If this option is set, the default capath value will be ignored, and if it is +used several times, the last one will be used. +.IP "--cert-status" +(TLS) Tells curl to verify the status of the server certificate by using the +Certificate Status Request (aka. OCSP stapling) TLS extension. + +If this option is enabled and the server sends an invalid (e.g. expired) +response, if the response suggests that the server certificate has been revoked, +or no response at all is received, the verification fails. + +This is currently only implemented in the OpenSSL, GnuTLS and NSS backends. + +Added in 7.41.0. +.IP "--cert-type " +(TLS) Tells curl what certificate type the provided certificate is in. PEM, DER and +ENG are recognized types. If not specified, PEM is assumed. + +If this option is used several times, the last one will be used. + +See also \fI-E, --cert\fP and \fI--key\fP and \fI--key-type\fP. +.IP "-E, --cert " +(TLS) Tells curl to use the specified client certificate file when getting a file +with HTTPS, FTPS or another SSL-based protocol. The certificate must be in +PKCS#12 format if using Secure Transport, or PEM format if using any other +engine. If the optional password isn't specified, it will be queried for on +the terminal. Note that this option assumes a \&"certificate" file that is the +private key and the client certificate concatenated! See \fI-E, --cert\fP and \fI--key\fP to +specify them independently. + +If curl is built against the NSS SSL library then this option can tell +curl the nickname of the certificate to use within the NSS database defined +by the environment variable SSL_DIR (or by default /etc/pki/nssdb). If the +NSS PEM PKCS#11 module (libnsspem.so) is available then PEM files may be +loaded. If you want to use a file from the current directory, please precede +it with "./" prefix, in order to avoid confusion with a nickname. If the +nickname contains ":", it needs to be preceded by "\\" so that it is not +recognized as password delimiter. If the nickname contains "\\", it needs to +be escaped as "\\\\" so that it is not recognized as an escape character. + +(iOS and macOS only) If curl is built against Secure Transport, then the +certificate string can either be the name of a certificate/private key in the +system or user keychain, or the path to a PKCS#12-encoded certificate and +private key. If you want to use a file from the current directory, please +precede it with "./" prefix, in order to avoid confusion with a nickname. + +If this option is used several times, the last one will be used. + +See also \fI--cert-type\fP and \fI--key\fP and \fI--key-type\fP. +.IP "--ciphers " +(TLS) Specifies which ciphers to use in the connection. The list of ciphers must +specify valid ciphers. Read up on SSL cipher list details on this URL: + + https://www.openssl.org/docs/apps/ciphers.html + +NSS ciphers are done differently than OpenSSL and GnuTLS. The full list of NSS +ciphers is in the NSSCipherSuite entry at this URL: + + https://git.fedorahosted.org/cgit/mod_nss.git/plain/docs/mod_nss.html#Directives + +If this option is used several times, the last one will be used. +.IP "--compressed" +(HTTP) Request a compressed response using one of the algorithms curl supports, and +save the uncompressed document. If this option is used and the server sends +an unsupported encoding, curl will report an error. +.IP "-K, --config " +Specify which config file to read curl arguments from. The config file is a +text file in which command line arguments can be written which then will be +used as if they were written on the actual command line. + +Options and their parameters must be specified on the same config file line, +separated by whitespace, colon, or the equals sign. Long option names can +optionally be given in the config file without the initial double dashes and +if so, the colon or equals characters can be used as separators. If the option +is specified with one or two dashes, there can be no colon or equals character +between the option and its parameter. + +If the parameter is to contain whitespace, the parameter must be enclosed +within quotes. Within double quotes, the following escape sequences are +available: \\\\, \\", \\t, \\n, \\r and \\v. A backslash preceding any other +letter is ignored. If the first column of a config line is a '#' character, +the rest of the line will be treated as a comment. Only write one option per +physical line in the config file. + +Specify the filename to \fI-K, --config\fP as '-' to make curl read the file from stdin. + +Note that to be able to specify a URL in the config file, you need to specify +it using the \fI--url\fP option, and not by simply writing the URL on its own +line. So, it could look similar to this: + +url = "https://curl.haxx.se/docs/" + +When curl is invoked, it always (unless \fI-q, --disable\fP is used) checks for a +default config file and uses it if found. The default config file is checked +for in the following places in this order: + +1) curl tries to find the "home dir": It first checks for the CURL_HOME and +then the HOME environment variables. Failing that, it uses getpwuid() on +Unix-like systems (which returns the home dir given the current user in your +system). On Windows, it then checks for the APPDATA variable, or as a last +resort the '%USERPROFILE%\\Application Data'. + +2) On windows, if there is no _curlrc file in the home dir, it checks for one +in the same dir the curl executable is placed. On Unix-like systems, it will +simply try to load .curlrc from the determined home dir. + +.nf +# --- Example file --- +# this is a comment +url = "example.com" +output = "curlhere.html" +user-agent = "superagent/1.0" + +# and fetch another URL too +url = "example.com/docs/manpage.html" +-O +referer = "http://nowhereatall.example.com/" +# --- End of example file --- +.fi + +This option can be used multiple times to load multiple config files. +.IP "--connect-timeout " +Maximum time in seconds that you allow curl's connection to take. This only +limits the connection phase, so if curl connects within the given period it +will continue - if not it will exit. Since version 7.32.0, this option +accepts decimal values. + +If this option is used several times, the last one will be used. + +See also \fI-m, --max-time\fP. +.IP "--connect-to " + +For a request to the given HOST:PORT pair, connect to +CONNECT-TO-HOST:CONNECT-TO-PORT instead. This option is suitable to direct +requests at a specific server, e.g. at a specific cluster node in a cluster of +servers. This option is only used to establish the network connection. It +does NOT affect the hostname/port that is used for TLS/SSL (e.g. SNI, +certificate verification) or for the application protocols. "host" and "port" +may be the empty string, meaning "any host/port". "connect-to-host" and +"connect-to-port" may also be the empty string, meaning "use the request's +original host/port". + +This option can be used many times to add many connect rules. + +See also \fI--resolve\fP and \fI-H, --header\fP. Added in 7.49.0. +.IP "-C, --continue-at " +Continue/Resume a previous file transfer at the given offset. The given offset +is the exact number of bytes that will be skipped, counting from the beginning +of the source file before it is transferred to the destination. If used with +uploads, the FTP server command SIZE will not be used by curl. + +Use "-C -" to tell curl to automatically find out where/how to resume the +transfer. It then uses the given output/input files to figure that out. + +If this option is used several times, the last one will be used. + +See also \fI-r, --range\fP. +.IP "-c, --cookie-jar " +(HTTP) Specify to which file you want curl to write all cookies after a completed +operation. Curl writes all cookies from its in-memory cookie storage to the +given file at the end of operations. If no cookies are known, no data will be +written. The file will be written using the Netscape cookie file format. If +you set the file name to a single dash, "-", the cookies will be written to +stdout. + +This command line option will activate the cookie engine that makes curl +record and use cookies. Another way to activate it is to use the \fI-b, --cookie\fP +option. + +If the cookie jar can't be created or written to, the whole curl operation +won't fail or even report an error clearly. Using \fI-v, --verbose\fP will get a warning +displayed, but that is the only visible feedback you get about this possibly +lethal situation. + +If this option is used several times, the last specified file name will be +used. +.IP "-b, --cookie " +(HTTP) Pass the data to the HTTP server in the Cookie header. It is supposedly +the data previously received from the server in a "Set-Cookie:" line. The +data should be in the format "NAME1=VALUE1; NAME2=VALUE2". + +If no '=' symbol is used in the argument, it is instead treated as a filename +to read previously stored cookie from. This option also activates the cookie +engine which will make curl record incoming cookies, which may be handy if +you're using this in combination with the \fI-L, --location\fP option or do multiple URL +transfers on the same invoke. + +The file format of the file to read cookies from should be plain HTTP headers +(Set-Cookie style) or the Netscape/Mozilla cookie file format. + +The file specified with \fI-b, --cookie\fP is only used as input. No cookies will be +written to the file. To store cookies, use the \fI-c, --cookie-jar\fP option. + +Exercise caution if you are using this option and multiple transfers may +occur. If you use the NAME1=VALUE1; format, or in a file use the Set-Cookie +format and don't specify a domain, then the cookie is sent for any domain +(even after redirects are followed) and cannot be modified by a server-set +cookie. If the cookie engine is enabled and a server sets a cookie of the same +name then both will be sent on a future transfer to that server, likely not +what you intended. To address these issues set a domain in Set-Cookie (doing +that will include sub domains) or use the Netscape format. + +If this option is used several times, the last one will be used. + +Users very often want to both read cookies from a file and write updated +cookies back to a file, so using both \fI-b, --cookie\fP and \fI-c, --cookie-jar\fP in the same +command line is common. +.IP "--create-dirs" +When used in conjunction with the \fI-o, --output\fP option, curl will create the +necessary local directory hierarchy as needed. This option creates the dirs +mentioned with the \fI-o, --output\fP option, nothing else. If the --output file name +uses no dir or if the dirs it mentions already exist, no dir will be created. + +To create remote directories when using FTP or SFTP, try \fI--ftp-create-dirs\fP. +.IP "--crlf" +(FTP SMTP) Convert LF to CRLF in upload. Useful for MVS (OS/390). + +(SMTP added in 7.40.0) +.IP "--crlfile " +(TLS) Provide a file using PEM format with a Certificate Revocation List that may +specify peer certificates that are to be considered revoked. + +If this option is used several times, the last one will be used. + +Added in 7.19.7. +.IP "--data-ascii " +(HTTP) This is just an alias for \fI-d, --data\fP. +.IP "--data-binary " +(HTTP) This posts data exactly as specified with no extra processing whatsoever. + +If you start the data with the letter @, the rest should be a filename. Data +is posted in a similar manner as \fI-d, --data\fP does, except that newlines and +carriage returns are preserved and conversions are never done. + +If this option is used several times, the ones following the first will append +data as described in \fI-d, --data\fP. +.IP "--data-raw " +(HTTP) This posts data similarly to \fI-d, --data\fP but without the special +interpretation of the @ character. + +See also \fI-d, --data\fP. Added in 7.43.0. +.IP "--data-urlencode " +(HTTP) This posts data, similar to the other \fI-d, --data\fP options with the exception +that this performs URL-encoding. + +To be CGI-compliant, the part should begin with a \fIname\fP followed +by a separator and a content specification. The part can be passed to +curl using one of the following syntaxes: +.RS +.IP "content" +This will make curl URL-encode the content and pass that on. Just be careful +so that the content doesn't contain any = or @ symbols, as that will then make +the syntax match one of the other cases below! +.IP "=content" +This will make curl URL-encode the content and pass that on. The preceding = +symbol is not included in the data. +.IP "name=content" +This will make curl URL-encode the content part and pass that on. Note that +the name part is expected to be URL-encoded already. +.IP "@filename" +This will make curl load data from the given file (including any newlines), +URL-encode that data and pass it on in the POST. +.IP "name@filename" +This will make curl load data from the given file (including any newlines), +URL-encode that data and pass it on in the POST. The name part gets an equal +sign appended, resulting in \fIname=urlencoded-file-content\fP. Note that the +name is expected to be URL-encoded already. +.RE + +See also \fI-d, --data\fP and \fI--data-raw\fP. Added in 7.18.0. +.IP "-d, --data " +(HTTP) Sends the specified data in a POST request to the HTTP server, in the same way +that a browser does when a user has filled in an HTML form and presses the +submit button. This will cause curl to pass the data to the server using the +content-type application/x-www-form-urlencoded. Compare to \fI-F, --form\fP. + +\fI--data-raw\fP is almost the same but does not have a special interpretation of +the @ character. To post data purely binary, you should instead use the +\fI--data-binary\fP option. To URL-encode the value of a form field you may use +\fI--data-urlencode\fP. + +If any of these options is used more than once on the same command line, the +data pieces specified will be merged together with a separating +&-symbol. Thus, using '-d name=daniel -d skill=lousy' would generate a post +chunk that looks like \&'name=daniel&skill=lousy'. + +If you start the data with the letter @, the rest should be a file name to +read the data from, or - if you want curl to read the data from +stdin. Multiple files can also be specified. Posting data from a file named +'foobar' would thus be done with \fI-d, --data\fP @foobar. When --data is told to read +from a file like that, carriage returns and newlines will be stripped out. If +you don't want the @ character to have a special interpretation use \fI--data-raw\fP +instead. + +See also \fI--data-binary\fP and \fI--data-urlencode\fP and \fI--data-raw\fP. This option overrides \fI-F, --form\fP and \fI-I, --head\fP and \fI--upload\fP. +.IP "--delegation " +(GSS/kerberos) Set LEVEL to tell the server what it is allowed to delegate when it +comes to user credentials. +.RS +.IP "none" +Don't allow any delegation. +.IP "policy" +Delegates if and only if the OK-AS-DELEGATE flag is set in the Kerberos +service ticket, which is a matter of realm policy. +.IP "always" +Unconditionally allow the server to delegate. +.RE +.IP "--digest" +(HTTP) Enables HTTP Digest authentication. This is an authentication scheme that +prevents the password from being sent over the wire in clear text. Use this in +combination with the normal \fI-u, --user\fP option to set user name and password. + +If this option is used several times, only the first one is used. + +See also \fI-u, --user\fP and \fI--proxy-digest\fP and \fI--anyauth\fP. This option overrides \fI--basic\fP and \fI--ntlm\fP and \fI--negotiate\fP. +.IP "--disable-eprt" +(FTP) Tell curl to disable the use of the EPRT and LPRT commands when doing active +FTP transfers. Curl will normally always first attempt to use EPRT, then LPRT +before using PORT, but with this option, it will use PORT right away. EPRT and +LPRT are extensions to the original FTP protocol, and may not work on all +servers, but they enable more functionality in a better way than the +traditional PORT command. + +--eprt can be used to explicitly enable EPRT again and --no-eprt is an alias +for \fI--disable-eprt\fP. + +If the server is accessed using IPv6, this option will have no effect as EPRT +is necessary then. + +Disabling EPRT only changes the active behavior. If you want to switch to +passive mode you need to not use \fI-P, --ftp-port\fP or force it with \fI--ftp-pasv\fP. +.IP "--disable-epsv" +(FTP) (FTP) Tell curl to disable the use of the EPSV command when doing passive FTP +transfers. Curl will normally always first attempt to use EPSV before PASV, +but with this option, it will not try using EPSV. + +--epsv can be used to explicitly enable EPSV again and --no-epsv is an alias +for \fI--disable-epsv\fP. + +If the server is an IPv6 host, this option will have no effect as EPSV is +necessary then. + +Disabling EPSV only changes the passive behavior. If you want to switch to +active mode you need to use \fI-P, --ftp-port\fP. +.IP "-q, --disable" +If used as the first parameter on the command line, the \fIcurlrc\fP config +file will not be read and used. See the \fI-K, --config\fP for details on the default +config file search path. +.IP "--dns-interface " +(DNS) Tell curl to send outgoing DNS requests through . This option is a +counterpart to \fI--interface\fP (which does not affect DNS). The supplied string +must be an interface name (not an address). + +See also \fI--dns-ipv4-addr\fP and \fI--dns-ipv6-addr\fP. \fI--dns-interface\fP requires that the underlying libcurl was built to support c-ares. Added in 7.33.0. +.IP "--dns-ipv4-addr
" +(DNS) Tell curl to bind to when making IPv4 DNS requests, so that +the DNS requests originate from this address. The argument should be a +single IPv4 address. + +See also \fI--dns-interface\fP and \fI--dns-ipv6-addr\fP. \fI--dns-ipv4-addr\fP requires that the underlying libcurl was built to support c-ares. Added in 7.33.0. +.IP "--dns-ipv6-addr
" +(DNS) Tell curl to bind to when making IPv6 DNS requests, so that +the DNS requests originate from this address. The argument should be a +single IPv6 address. + +See also \fI--dns-interface\fP and \fI--dns-ipv4-addr\fP. \fI--dns-ipv6-addr\fP requires that the underlying libcurl was built to support c-ares. Added in 7.33.0. +.IP "--dns-servers " +Set the list of DNS servers to be used instead of the system default. +The list of IP addresses should be separated with commas. Port numbers +may also optionally be given as \fI:\fP after each IP +address. + +\fI--dns-servers\fP requires that the underlying libcurl was built to support c-ares. Added in 7.33.0. +.IP "-D, --dump-header " +(HTTP FTP) Write the received protocol headers to the specified file. + +This option is handy to use when you want to store the headers that an HTTP +site sends to you. Cookies from the headers could then be read in a second +curl invocation by using the \fI-b, --cookie\fP option! The \fI-c, --cookie-jar\fP option is a +better way to store cookies. + +When used in FTP, the FTP server response lines are considered being "headers" +and thus are saved there. + +If this option is used several times, the last one will be used. + +See also \fI-o, --output\fP. +.IP "--egd-file " +(TLS) Specify the path name to the Entropy Gathering Daemon socket. The socket is +used to seed the random engine for SSL connections. + +See also \fI--random-file\fP. +.IP "--engine " +(TLS) Select the OpenSSL crypto engine to use for cipher operations. Use \fI--engine\fP +list to print a list of build-time supported engines. Note that not all (or +none) of the engines may be available at run-time. +.IP "--environment" +Sets a range of environment variables, using the names the \fI-w, --write-out\fP option +supports, to allow easier extraction of useful information after having run +curl. + +\fI--environment\fP requires that the underlying libcurl was built to support RISC OS. +.IP "--expect100-timeout " +(HTTP) Maximum time in seconds that you allow curl to wait for a 100-continue +response when curl emits an Expects: 100-continue header in its request. By +default curl will wait one second. This option accepts decimal values! When +curl stops waiting, it will continue as if the response has been received. + +See also \fI--connect-timeout\fP. Added in 7.47.0. +.IP "--fail-early" +Fail and exit on first detected error. + +When curl is used to do multiple transfers on the command line, it will +attempt to operate on each given URL, one by one. By default, it will ignore +errors if there are more URLs given and the last URL's success will determine +the error code curl returns. So early failures will be "hidden" by subsequent +successful transfers. + +Using this option, curl will instead return an error on the first transfers +that fails, independent on the amount of more URLs that are given on the +command line. This way, no transfer failures go undetected by scripts and +similar. + +This option will apply for all given URLs even if you use \fI-:, --next\fP. + +Added in 7.52.0. +.IP "-f, --fail" +(HTTP) Fail silently (no output at all) on server errors. This is mostly done to +better enable scripts etc to better deal with failed attempts. In normal cases +when an HTTP server fails to deliver a document, it returns an HTML document +stating so (which often also describes why and more). This flag will prevent +curl from outputting that and return error 22. + +This method is not fail-safe and there are occasions where non-successful +response codes will slip through, especially when authentication is involved +(response codes 401 and 407). +.IP "--false-start" +(TLS) Tells curl to use false start during the TLS handshake. False start is a mode +where a TLS client will start sending application data before verifying the +server's Finished message, thus saving a round trip when performing a full +handshake. + +This is currently only implemented in the NSS and Secure Transport (on iOS 7.0 +or later, or OS X 10.9 or later) backends. + +Added in 7.42.0. +.IP "--form-string " +(HTTP) Similar to \fI-F, --form\fP except that the value string for the named parameter is used +literally. Leading \&'@' and \&'<' characters, and the \&';type=' string in +the value have no special meaning. Use this in preference to \fI-F, --form\fP if +there's any possibility that the string value may accidentally trigger the +\&'@' or \&'<' features of \fI-F, --form\fP. + +See also \fI-F, --form\fP. +.IP "-F, --form " +(HTTP) This lets curl emulate a filled-in form in which a user has pressed the submit +button. This causes curl to POST data using the Content-Type +multipart/form-data according to RFC 2388. This enables uploading of binary +files etc. To force the 'content' part to be a file, prefix the file name with +an @ sign. To just get the content part from a file, prefix the file name with +the symbol <. The difference between @ and < is then that @ makes a file get +attached in the post as a file upload, while the < makes a text field and just +get the contents for that text field from a file. + +Example: to send an image to a server, where \&'profile' is the name of the +form-field to which portrait.jpg will be the input: + + curl -F profile=@portrait.jpg https://example.com/upload.cgi + +To read content from stdin instead of a file, use - as the filename. This goes +for both @ and < constructs. Unfortunately it does not support reading the +file from a named pipe or similar, as it needs the full size before the +transfer starts. + +You can also tell curl what Content-Type to use by using 'type=', in a manner +similar to: + + curl -F "web=@index.html;type=text/html" example.com + +or + + curl -F "name=daniel;type=text/foo" example.com + +You can also explicitly change the name field of a file upload part by setting +filename=, like this: + + curl -F "file=@localfile;filename=nameinpost" example.com + +If filename/path contains ',' or ';', it must be quoted by double-quotes like: + + curl -F "file=@\\"localfile\\";filename=\\"nameinpost\\"" example.com + +or + + curl -F 'file=@"localfile";filename="nameinpost"' example.com + +Note that if a filename/path is quoted by double-quotes, any double-quote +or backslash within the filename must be escaped by backslash. + +See further examples and details in the MANUAL. + +This option can be used multiple times. + +This option overrides \fI-d, --data\fP and \fI-I, --head\fP and \fI--upload\fP. +.IP "--ftp-account " +(FTP) When an FTP server asks for "account data" after user name and password has +been provided, this data is sent off using the ACCT command. + +If this option is used several times, the last one will be used. + +Added in 7.13.0. +.IP "--ftp-alternative-to-user " +(FTP) If authenticating with the USER and PASS commands fails, send this command. +When connecting to Tumbleweed's Secure Transport server over FTPS using a +client certificate, using "SITE AUTH" will tell the server to retrieve the +username from the certificate. + +Added in 7.15.5. +.IP "--ftp-create-dirs" +(FTP SFTP) When an FTP or SFTP URL/operation uses a path that doesn't currently exist on +the server, the standard behavior of curl is to fail. Using this option, curl +will instead attempt to create missing directories. + +See also \fI--create-dirs\fP. +.IP "--ftp-method " +(FTP) Control what method curl should use to reach a file on an FTP(S) +server. The method argument should be one of the following alternatives: +.RS +.IP multicwd +curl does a single CWD operation for each path part in the given URL. For deep +hierarchies this means very many commands. This is how RFC 1738 says it should +be done. This is the default but the slowest behavior. +.IP nocwd +curl does no CWD at all. curl will do SIZE, RETR, STOR etc and give a full +path to the server for all these commands. This is the fastest behavior. +.IP singlecwd +curl does one CWD with the full target directory and then operates on the file +\&"normally" (like in the multicwd case). This is somewhat more standards +compliant than 'nocwd' but without the full penalty of 'multicwd'. +.RE + +Added in 7.15.1. +.IP "--ftp-pasv" +(FTP) Use passive mode for the data connection. Passive is the internal default +behavior, but using this option can be used to override a previous \fI-P, --ftp-port\fP +option. + +If this option is used several times, only the first one is used. Undoing an +enforced passive really isn't doable but you must then instead enforce the +correct \fI-P, --ftp-port\fP again. + +Passive mode means that curl will try the EPSV command first and then PASV, +unless \fI--disable-epsv\fP is used. + +See also \fI--disable-epsv\fP. Added in 7.11.0. +.IP "-P, --ftp-port
" +(FTP) Reverses the default initiator/listener roles when connecting with FTP. This +option makes curl use active mode. curl then tells the server to connect back +to the client's specified address and port, while passive mode asks the server +to setup an IP address and port for it to connect to.
should be one +of: +.RS +.IP interface +i.e "eth0" to specify which interface's IP address you want to use (Unix only) +.IP "IP address" +i.e "192.168.10.1" to specify the exact IP address +.IP "host name" +i.e "my.host.domain" to specify the machine +.IP "-" +make curl pick the same IP address that is already used for the control +connection +.RE + +If this option is used several times, the last one will be used. Disable the +use of PORT with \fI--ftp-pasv\fP. Disable the attempt to use the EPRT command +instead of PORT by using \fI--disable-eprt\fP. EPRT is really PORT++. + +Since 7.19.5, you can append \&":[start]-[end]\&" to the right of the address, +to tell curl what TCP port range to use. That means you specify a port range, +from a lower to a higher number. A single number works as well, but do note +that it increases the risk of failure since the port may not be available. + +See also \fI--ftp-pasv\fP and \fI--disable-eprt\fP. +.IP "--ftp-pret" +(FTP) Tell curl to send a PRET command before PASV (and EPSV). Certain FTP servers, +mainly drftpd, require this non-standard command for directory listings as +well as up and downloads in PASV mode. + +Added in 7.20.0. +.IP "--ftp-skip-pasv-ip" +(FTP) Tell curl to not use the IP address the server suggests in its response +to curl's PASV command when curl connects the data connection. Instead curl +will re-use the same IP address it already uses for the control +connection. + +This option has no effect if PORT, EPRT or EPSV is used instead of PASV. + +See also \fI--ftp-pasv\fP. Added in 7.14.2. +.IP "--ftp-ssl-ccc-mode " +(FTP) Sets the CCC mode. The passive mode will not initiate the shutdown, but +instead wait for the server to do it, and will not reply to the shutdown from +the server. The active mode initiates the shutdown and waits for a reply from +the server. + +See also \fI--ftp-ssl-ccc\fP. Added in 7.16.2. +.IP "--ftp-ssl-ccc" +(FTP) Use CCC (Clear Command Channel) Shuts down the SSL/TLS layer after +authenticating. The rest of the control channel communication will be +unencrypted. This allows NAT routers to follow the FTP transaction. The +default mode is passive. + +See also \fI--ssl\fP and \fI--ftp-ssl-ccc-mode\fP. Added in 7.16.1. +.IP "--ftp-ssl-control" +(FTP) Require SSL/TLS for the FTP login, clear for transfer. Allows secure +authentication, but non-encrypted data transfers for efficiency. Fails the +transfer if the server doesn't support SSL/TLS. + +Added in 7.16.0. +.IP "-G, --get" +When used, this option will make all data specified with \fI-d, --data\fP, \fI--data-binary\fP +or \fI--data-urlencode\fP to be used in an HTTP GET request instead of the POST +request that otherwise would be used. The data will be appended to the URL +with a '?' separator. + +If used in combination with \fI-I, --head\fP, the POST data will instead be appended to +the URL with a HEAD request. + +If this option is used several times, only the first one is used. This is +because undoing a GET doesn't make sense, but you should then instead enforce +the alternative method you prefer. +.IP "-g, --globoff" +This option switches off the "URL globbing parser". When you set this option, +you can specify URLs that contain the letters {}[] without having them being +interpreted by curl itself. Note that these letters are not normal legal URL +contents but they should be encoded according to the URI standard. +.IP "-I, --head" +(HTTP FTP FILE) Fetch the headers only! HTTP-servers feature the command HEAD which this uses +to get nothing but the header of a document. When used on an FTP or FILE file, +curl displays the file size and last modification time only. +.IP "-H, --header
" +(HTTP) +Extra header to include in the request when sending HTTP to a server. You may +specify any number of extra headers. Note that if you should add a custom +header that has the same name as one of the internal ones curl would use, your +externally set header will be used instead of the internal one. This allows +you to make even trickier stuff than curl would normally do. You should not +replace internally set headers without knowing perfectly well what you're +doing. Remove an internal header by giving a replacement without content on +the right side of the colon, as in: -H \&"Host:". If you send the custom +header with no-value then its header must be terminated with a semicolon, such +as \-H \&"X-Custom-Header;" to send "X-Custom-Header:". + +curl will make sure that each header you add/replace is sent with the proper +end-of-line marker, you should thus \fBnot\fP add that as a part of the header +content: do not add newlines or carriage returns, they will only mess things up +for you. + +See also the \fI-A, --user-agent\fP and \fI-e, --referer\fP options. + +Starting in 7.37.0, you need \fI--proxy-header\fP to send custom headers intended +for a proxy. + +Example: + + curl -H "X-First-Name: Joe" http://example.com/ + +\fBWARNING\fP: headers set with this option will be set in all requests - even +after redirects are followed, like when told with \fI-L, --location\fP. This can lead to +the header being sent to other hosts than the original host, so sensitive +headers should be used with caution combined with following redirects. + +This option can be used multiple times to add/replace/remove multiple headers. +.IP "-h, --help" +Usage help. This lists all current command line options with a short +description. +.IP "--hostpubmd5 " +(SFTP SCP) Pass a string containing 32 hexadecimal digits. The string should +be the 128 bit MD5 checksum of the remote host's public key, curl will refuse +the connection with the host unless the md5sums match. + +Added in 7.17.1. +.IP "-0, --http1.0" +(HTTP) Tells curl to use HTTP version 1.0 instead of using its internally preferred +HTTP version. + +This option overrides \fI--http1.1\fP and \fI--http2\fP. +.IP "--http1.1" +(HTTP) Tells curl to use HTTP version 1.1. + +This option overrides \fI-0, --http1.0\fP and \fI--http2\fP. Added in 7.33.0. +.IP "--http2-prior-knowledge" +(HTTP) Tells curl to issue its non-TLS HTTP requests using HTTP/2 without HTTP/1.1 +Upgrade. It requires prior knowledge that the server supports HTTP/2 straight +away. HTTPS requests will still do HTTP/2 the standard way with negotiated +protocol version in the TLS handshake. + +\fI--http2-prior-knowledge\fP requires that the underlying libcurl was built to support HTTP/2. This option overrides \fI--http1.1\fP and \fI-0, --http1.0\fP and \fI--http2\fP. Added in 7.49.0. +.IP "--http2" +(HTTP) Tells curl to use HTTP version 2. + +See also \fI--no-alpn\fP. \fI--http2\fP requires that the underlying libcurl was built to support HTTP/2. This option overrides \fI--http1.1\fP and \fI-0, --http1.0\fP and \fI--http2-prior-knowledge\fP. Added in 7.33.0. +.IP "--ignore-content-length" +(FTP HTTP) For HTTP, Ignore the Content-Length header. This is particularly useful for +servers running Apache 1.x, which will report incorrect Content-Length for +files larger than 2 gigabytes. + +For FTP (since 7.46.0), skip the RETR command to figure out the size before +downloading a file. +.IP "-i, --include" +Include the HTTP-header in the output. The HTTP-header includes things like +server-name, date of the document, HTTP-version and more... + +See also \fI-v, --verbose\fP. +.IP "-k, --insecure" +(TLS) This option explicitly allows curl to perform "insecure" SSL connections and +transfers. All SSL connections are attempted to be made secure by using the CA +certificate bundle installed by default. This makes all connections considered +\&"insecure" fail unless \fI-k, --insecure\fP is used. + +See this online resource for further details: + https://curl.haxx.se/docs/sslcerts.html +.IP "--interface " + +Perform an operation using a specified interface. You can enter interface +name, IP address or host name. An example could look like: + + curl --interface eth0:1 https://www.example.com/ + +If this option is used several times, the last one will be used. + +See also \fI--dns-interface\fP. +.IP "-4, --ipv4" +This option tells curl to resolve names to IPv4 addresses only, and not for +example try IPv6. + +See also \fI--http1.1\fP and \fI--http2\fP. This option overrides \fI-6, --ipv6\fP. +.IP "-6, --ipv6" +This option tells curl to resolve names to IPv6 addresses only, and not for +example try IPv4. + +See also \fI--http1.1\fP and \fI--http2\fP. This option overrides \fI-6, --ipv6\fP. +.IP "-j, --junk-session-cookies" +(HTTP) When curl is told to read cookies from a given file, this option will make it +discard all "session cookies". This will basically have the same effect as if +a new session is started. Typical browsers always discard session cookies when +they're closed down. + +See also \fI-b, --cookie\fP and \fI-c, --cookie-jar\fP. +.IP "--keepalive-time " +This option sets the time a connection needs to remain idle before sending +keepalive probes and the time between individual keepalive probes. It is +currently effective on operating systems offering the TCP_KEEPIDLE and +TCP_KEEPINTVL socket options (meaning Linux, recent AIX, HP-UX and more). This +option has no effect if \fI--no-keepalive\fP is used. + +If this option is used several times, the last one will be used. If +unspecified, the option defaults to 60 seconds. + +Added in 7.18.0. +.IP "--key-type " +(TLS) Private key file type. Specify which type your \fI--key\fP provided private key +is. DER, PEM, and ENG are supported. If not specified, PEM is assumed. + +If this option is used several times, the last one will be used. +.IP "--key " +(TLS SSH) Private key file name. Allows you to provide your private key in this separate +file. For SSH, if not specified, curl tries the following candidates in order: +'~/.ssh/id_rsa', '~/.ssh/id_dsa', './id_rsa', './id_dsa'. + +If this option is used several times, the last one will be used. +.IP "--krb " +(FTP) Enable Kerberos authentication and use. The level must be entered and should +be one of 'clear', 'safe', 'confidential', or 'private'. Should you use a +level that is not one of these, 'private' will instead be used. + +If this option is used several times, the last one will be used. + +\fI--krb\fP requires that the underlying libcurl was built to support Kerberos. +.IP "--libcurl " +Append this option to any ordinary curl command line, and you will get a +libcurl-using C source code written to the file that does the equivalent +of what your command-line operation does! + +If this option is used several times, the last given file name will be +used. + +Added in 7.16.1. +.IP "--limit-rate " +Specify the maximum transfer rate you want curl to use - for both downloads +and uploads. This feature is useful if you have a limited pipe and you'd like +your transfer not to use your entire bandwidth. To make it slower than it +otherwise would be. + +The given speed is measured in bytes/second, unless a suffix is appended. +Appending 'k' or 'K' will count the number as kilobytes, 'm' or M' makes it +megabytes, while 'g' or 'G' makes it gigabytes. Examples: 200K, 3m and 1G. + +If you also use the \fI-Y, --speed-limit\fP option, that option will take precedence and +might cripple the rate-limiting slightly, to help keeping the speed-limit +logic working. + +If this option is used several times, the last one will be used. +.IP "-l, --list-only" +(FTP POP3) (FTP) +When listing an FTP directory, this switch forces a name-only view. This is +especially useful if the user wants to machine-parse the contents of an FTP +directory since the normal directory view doesn't use a standard look or +format. When used like this, the option causes a NLST command to be sent to +the server instead of LIST. + +Note: Some FTP servers list only files in their response to NLST; they do not +include sub-directories and symbolic links. + +(POP3) +When retrieving a specific email from POP3, this switch forces a LIST command +to be performed instead of RETR. This is particularly useful if the user wants +to see if a specific message id exists on the server and what size it is. + +Note: When combined with \fI-X, --request\fP, this option can be used to send an UIDL +command instead, so the user may use the email's unique identifier rather than +it's message id to make the request. + +Added in 7.21.5. +.IP "--local-port " +Set a preferred single number or range (FROM-TO) of local port numbers to use +for the connection(s). Note that port numbers by nature are a scarce resource +that will be busy at times so setting this range to something too narrow might +cause unnecessary connection setup failures. + +Added in 7.15.2. +.IP "--location-trusted" +(HTTP) Like \fI-L, --location\fP, but will allow sending the name + password to all hosts that +the site may redirect to. This may or may not introduce a security breach if +the site redirects you to a site to which you'll send your authentication info +(which is plaintext in the case of HTTP Basic authentication). + +See also \fI-u, --user\fP. +.IP "-L, --location" +(HTTP) If the server reports that the requested page has moved to a different +location (indicated with a Location: header and a 3XX response code), this +option will make curl redo the request on the new place. If used together with +\fI-i, --include\fP or \fI-I, --head\fP, headers from all requested pages will be shown. When +authentication is used, curl only sends its credentials to the initial +host. If a redirect takes curl to a different host, it won't be able to +intercept the user+password. See also \fI--location-trusted\fP on how to change +this. You can limit the amount of redirects to follow by using the +\fI--max-redirs\fP option. + +When curl follows a redirect and the request is not a plain GET (for example +POST or PUT), it will do the following request with a GET if the HTTP response +was 301, 302, or 303. If the response code was any other 3xx code, curl will +re-send the following request using the same unmodified method. + +You can tell curl to not change the non-GET request method to GET after a 30x +response by using the dedicated options for that: \fI--post301\fP, \fI--post302\fP and +\fI--post303\fP. +.IP "--login-options " +(IMAP POP3 SMTP) Specify the login options to use during server authentication. + +You can use the login options to specify protocol specific options that may +be used during authentication. At present only IMAP, POP3 and SMTP support +login options. For more information about the login options please see +RFC 2384, RFC 5092 and IETF draft draft-earhart-url-smtp-00.txt + +If this option is used several times, the last one will be used. + +Added in 7.34.0. +.IP "--mail-auth
" +(SMTP) Specify a single address. This will be used to specify the authentication +address (identity) of a submitted message that is being relayed to another +server. + +See also \fI--mail-rcpt\fP and \fI--mail-from\fP. Added in 7.25.0. +.IP "--mail-from
" +(SMTP) Specify a single address that the given mail should get sent from. + +See also \fI--mail-rcpt\fP and \fI--mail-auth\fP. Added in 7.20.0. +.IP "--mail-rcpt
" +(SMTP) Specify a single address, user name or mailing list name. Repeat this +option several times to send to multiple recipients. + +When performing a mail transfer, the recipient should specify a valid email +address to send the mail to. + +When performing an address verification (VRFY command), the recipient should be +specified as the user name or user name and domain (as per Section 3.5 of +RFC5321). (Added in 7.34.0) + +When performing a mailing list expand (EXPN command), the recipient should be +specified using the mailing list name, such as "Friends" or "London-Office". +(Added in 7.34.0) + +Added in 7.20.0. +.IP "-M, --manual" +Manual. Display the huge help text. +.IP "--max-filesize " +Specify the maximum size (in bytes) of a file to download. If the file +requested is larger than this value, the transfer will not start and curl will +return with exit code 63. + +\fBNOTE:\fP The file size is not always known prior to download, and for such +files this option has no effect even if the file transfer ends up being larger +than this given limit. This concerns both FTP and HTTP transfers. + +See also \fI--limit-rate\fP. +.IP "--max-redirs " +(HTTP) Set maximum number of redirection-followings allowed. When \fI-L, --location\fP is used, +is used to prevent curl from following redirections \&"in absurdum". By +default, the limit is set to 50 redirections. Set this option to -1 to make it +unlimited. + +If this option is used several times, the last one will be used. +.IP "-m, --max-time