You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

211 lines
7.9 KiB

/* Copyright (c) 2012 The Chromium Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* From ppb_audio_config.idl modified Fri Jan 24 16:19:35 2014. */
#ifndef PPAPI_C_PPB_AUDIO_CONFIG_H_
#define PPAPI_C_PPB_AUDIO_CONFIG_H_
#include "ppapi/c/pp_bool.h"
#include "ppapi/c/pp_instance.h"
#include "ppapi/c/pp_macros.h"
#include "ppapi/c/pp_resource.h"
#include "ppapi/c/pp_stdint.h"
#define PPB_AUDIO_CONFIG_INTERFACE_1_0 "PPB_AudioConfig;1.0"
#define PPB_AUDIO_CONFIG_INTERFACE_1_1 "PPB_AudioConfig;1.1"
#define PPB_AUDIO_CONFIG_INTERFACE PPB_AUDIO_CONFIG_INTERFACE_1_1
/**
* @file
* This file defines the PPB_AudioConfig interface for establishing an
* audio configuration resource within the browser.
*/
/**
* @addtogroup Enums
* @{
*/
/**
* This enumeration contains audio frame count constants.
* <code>PP_AUDIOMINSAMPLEFRAMECOUNT</code> is the minimum possible frame
* count. <code>PP_AUDIOMAXSAMPLEFRAMECOUNT</code> is the maximum possible
* frame count.
*/
enum {
PP_AUDIOMINSAMPLEFRAMECOUNT = 64,
PP_AUDIOMAXSAMPLEFRAMECOUNT = 32768
};
/**
* PP_AudioSampleRate is an enumeration of the different audio sampling rates.
* <code>PP_AUDIOSAMPLERATE_44100</code> is the sample rate used on CDs and
* <code>PP_AUDIOSAMPLERATE_48000</code> is the sample rate used on DVDs and
* Digital Audio Tapes.
*/
typedef enum {
PP_AUDIOSAMPLERATE_NONE = 0,
PP_AUDIOSAMPLERATE_44100 = 44100,
PP_AUDIOSAMPLERATE_48000 = 48000
} PP_AudioSampleRate;
PP_COMPILE_ASSERT_SIZE_IN_BYTES(PP_AudioSampleRate, 4);
/**
* @}
*/
/**
* @addtogroup Interfaces
* @{
*/
/**
* The <code>PPB_AudioConfig</code> interface contains pointers to several
* functions for establishing your audio configuration within the browser.
* This interface only supports 16-bit stereo output.
*
* Refer to the
* <a href="/native-client/devguide/coding/audio.html">Audio
* </a> chapter in the Developer's Guide for information on using this
* interface.
*/
struct PPB_AudioConfig_1_1 {
/**
* CreateStereo16bit() creates a 16 bit audio configuration resource. The
* <code>sample_rate</code> should be the result of calling
* <code>RecommendSampleRate</code> and <code>sample_frame_count</code> should
* be the result of calling <code>RecommendSampleFrameCount</code>. If the
* sample frame count or bit rate isn't supported, this function will fail and
* return a null resource.
*
* A single sample frame on a stereo device means one value for the left
* channel and one value for the right channel.
*
* Buffer layout for a stereo int16 configuration:
* <code>int16_t *buffer16;</code>
* <code>buffer16[0]</code> is the first left channel sample.
* <code>buffer16[1]</code> is the first right channel sample.
* <code>buffer16[2]</code> is the second left channel sample.
* <code>buffer16[3]</code> is the second right channel sample.
* ...
* <code>buffer16[2 * (sample_frame_count - 1)]</code> is the last left
* channel sample.
* <code>buffer16[2 * (sample_frame_count - 1) + 1]</code> is the last
* right channel sample.
* Data will always be in the native endian format of the platform.
*
* @param[in] instance A <code>PP_Instance</code> identifying one instance
* of a module.
* @param[in] sample_rate A <code>PP_AudioSampleRate</code> which is either
* <code>PP_AUDIOSAMPLERATE_44100</code> or
* <code>PP_AUDIOSAMPLERATE_48000</code>.
* @param[in] sample_frame_count A <code>uint32_t</code> frame count returned
* from the <code>RecommendSampleFrameCount</code> function.
*
* @return A <code>PP_Resource</code> containing the
* <code>PPB_Audio_Config</code> if successful or a null resource if the
* sample frame count or bit rate are not supported.
*/
PP_Resource (*CreateStereo16Bit)(PP_Instance instance,
PP_AudioSampleRate sample_rate,
uint32_t sample_frame_count);
/**
* RecommendSampleFrameCount() returns the supported sample frame count
* closest to the requested count. The sample frame count determines the
* overall latency of audio. Since one "frame" is always buffered in advance,
* smaller frame counts will yield lower latency, but higher CPU utilization.
*
* Supported sample frame counts will vary by hardware and system (consider
* that the local system might be anywhere from a cell phone or a high-end
* audio workstation). Sample counts less than
* <code>PP_AUDIOMINSAMPLEFRAMECOUNT</code> and greater than
* <code>PP_AUDIOMAXSAMPLEFRAMECOUNT</code> are never supported on any
* system, but values in between aren't necessarily valid. This function
* will return a supported count closest to the requested frame count.
*
* RecommendSampleFrameCount() result is intended for audio output devices.
*
* @param[in] instance
* @param[in] sample_rate A <code>PP_AudioSampleRate</code> which is either
* <code>PP_AUDIOSAMPLERATE_44100</code> or
* <code>PP_AUDIOSAMPLERATE_48000.</code>
* @param[in] requested_sample_frame_count A <code>uint_32t</code> requested
* frame count.
*
* @return A <code>uint32_t</code> containing the recommended sample frame
* count if successful.
*/
uint32_t (*RecommendSampleFrameCount)(
PP_Instance instance,
PP_AudioSampleRate sample_rate,
uint32_t requested_sample_frame_count);
/**
* IsAudioConfig() determines if the given resource is a
* <code>PPB_Audio_Config</code>.
*
* @param[in] resource A <code>PP_Resource</code> corresponding to an audio
* config resource.
*
* @return A <code>PP_Bool</code> containing <code>PP_TRUE</code> if the given
* resource is an <code>AudioConfig</code> resource, otherwise
* <code>PP_FALSE</code>.
*/
PP_Bool (*IsAudioConfig)(PP_Resource resource);
/**
* GetSampleRate() returns the sample rate for the given
* <code>PPB_Audio_Config</code>.
*
* @param[in] config A <code>PP_Resource</code> corresponding to a
* <code>PPB_Audio_Config</code>.
*
* @return A <code>PP_AudioSampleRate</code> containing sample rate or
* <code>PP_AUDIOSAMPLERATE_NONE</code> if the resource is invalid.
*/
PP_AudioSampleRate (*GetSampleRate)(PP_Resource config);
/**
* GetSampleFrameCount() returns the sample frame count for the given
* <code>PPB_Audio_Config</code>.
*
* @param[in] config A <code>PP_Resource</code> corresponding to an audio
* config resource.
*
* @return A <code>uint32_t</code> containing sample frame count or
* 0 if the resource is invalid. Refer to
* RecommendSampleFrameCount() for more on sample frame counts.
*/
uint32_t (*GetSampleFrameCount)(PP_Resource config);
/**
* RecommendSampleRate() returns the native sample rate that the browser
* is using in the backend. Applications that use the recommended sample
* rate will have potentially better latency and fidelity. The return value
* is intended for audio output devices. If the output sample rate cannot be
* determined, this function can return PP_AUDIOSAMPLERATE_NONE.
*
* @param[in] instance
*
* @return A <code>uint32_t</code> containing the recommended sample frame
* count if successful.
*/
PP_AudioSampleRate (*RecommendSampleRate)(PP_Instance instance);
};
typedef struct PPB_AudioConfig_1_1 PPB_AudioConfig;
struct PPB_AudioConfig_1_0 {
PP_Resource (*CreateStereo16Bit)(PP_Instance instance,
PP_AudioSampleRate sample_rate,
uint32_t sample_frame_count);
uint32_t (*RecommendSampleFrameCount)(
PP_AudioSampleRate sample_rate,
uint32_t requested_sample_frame_count);
PP_Bool (*IsAudioConfig)(PP_Resource resource);
PP_AudioSampleRate (*GetSampleRate)(PP_Resource config);
uint32_t (*GetSampleFrameCount)(PP_Resource config);
};
/**
* @}
*/
#endif /* PPAPI_C_PPB_AUDIO_CONFIG_H_ */