27 KiB

Raw Blame History

layout	description	permalink
learn	How to use Blockstack on iOS Mobile	/:collection/:path.html

iOS SDK Tutorial (Pre-release)

{:.no_toc}

This tutorial teaches you how to create a decentralized application using Blockstack's iOS SDK using the following content:

TOC {:toc}

This tutorial was extensively tested using Xcode Version 11.2 (11B52) on a MacBook Pro running Mojave 10.14. If your environment is different, you may encounter slight or even major discrepancies when performing the procedures in this tutorial. Please join the Blockstack community Slack and post questions or comments to the #support channel.

Finally, this tutorial is written for all levels from the beginner to the most experienced. For best results, beginners should follow the guide as written. It is expected that the fast or furiously brilliant will skip ahead and improvise on this material at will. God speed one and all.

If you want to download a complete application rather than working through a tutorial, see this alternative sample, the photoblock-demo.

Understand the sample application flow

When complete, the sample application is a simple hello-world intended for use on an iOS phone.

Only users with an existing blockstack.id can run your final sample application. When complete, users interact with the sample application by doing the following:

Set up your environment

This sample application requires two code bases, a BlockStack hello-blockstack web application and a hello-ios iOS application. You use the iOS application to run the web application on an iOS device.

Before you start developing the sample, there are a few elements you need in your environment.

Install XCode

If you are an experienced iOS developer and already have an iOS development environment on your workstation, you can use that and skip this step. However, you may need to adjust the remaining instructions for your environment.

Follow the installation instructions to download and install XCode for your operating system. Depending on your network connection, this can take between 15-30 minutes.

Do you have Node.js?

Node.js v10 or higher is recommended the minimum supported version is Node.js v8. Before you begin, verify you have the correct version of Node.js and its tools installed.

$ node -v
v12.10.0
$ which npm npx
/usr/local/bin/npm
/usr/local/bin/npx

If you don't have these installed, take a moment to install or upgrade as needed.

Install the CocoaPods 1.6.0.beta.1 dependency manager

The sample application only runs on devices with iOS 11.0 or higher. You install the Blockstack iOS SDK through the CocoaPods. Cocoapods is a dependency manager for Swift and Objective-C Cocoa projects. It’s a simple, user friendly way to use libraries from the community in your project.

You must use the 1.6.0.beta.1 version of CocoaPods or newer to avoid an incapability between Cocoapods and XCode. Before starting the tutorial, confirm you have installed CocoaPods.

$ pod --version
1.8.1

If you don't have the CocoaPods beta version, install it:

sudo gem install cocoapods -v 1.8.1

Build the Blockstack hello-world

In this section, you build a Blockstack hello-world application. Then, you modify the hello-world to interact with the iOS app via a redirect.

Generate and launch your hello-blockstack application

{% include scaffolding.md %}

In this section, you build an initial React.js application called hello-blockstack.

Create a hello-blockstack directory.
```
mkdir hello-blockstack
```
Change into your new directory.
```
cd hello-blockstack
```

Create your initial hello-world-tutorial application.

$ npx generator-blockstack --react
  npx: installed 338 in 13.792s
    create package.json
    create .gitignore
    create webpack.config.js
    create netlify.toml
    create firebase.json
    ...
    I'm all done. Running npm install for you to install the required dependencies. If this fails, try running the command yourself.

  > fsevents@1.2.9 install /private/tmp/testymc/node_modules/fsevents
  > node install
  added 775 packages from 455 contributors and audited 9435 packages in 20.934s
  found 0 vulnerabilities

Depending on your environment you may have some warnings with the installation. Optionally, you can fix these before continuing to the next section.

Run the initial application.

 npm run start

> hello-blockstack@0.0.0 start /Users/meepers/repos/hello-blockstack
> webpack-dev-server

Project is running at http://localhost:8080/
webpack output is served from /
404s will fallback to /index.html
Hash: 4d2312ba236a4b95dc3a
Version: webpack 2.7.0
Time: 2969ms
                                 Asset       Size  Chunks                    Chunk Names
....
  Child html-webpack-plugin for "index.html":
     chunk    {0} index.html 541 kB [entry] [rendered]
         [0] ./~/lodash/lodash.js 540 kB {0} [built]
         [1] ./~/html-webpack-plugin/lib/loader.js!./src/index.html 533 bytes {0} [built]
         [2] (webpack)/buildin/global.js 509 bytes {0} [built]
         [3] (webpack)/buildin/module.js 517 bytes {0} [built]
 webpack: Compiled successfully.

At this point, the browser is running a Blockstack server on your local host.

Navigate to http://localhost:8080 with your browser to display the application.

![]({{ site.baseurl }}/browser/images/initial-app.png)

This local instances is for testing your applications only.
Choose Sign in with Blockstack

The system displays a prompt allowing you to create a new Blockstack ID or restore an existing one.

![]({{ site.baseurl }}/browser/images/login-choice.png)
Follow the prompts appropriate to your situation.

If you are restoring an existing ID, you may see a prompt about your user being nameless, ignore it. At this point you have only a single application on your test server. So, you should see this single application, with your own blockstack.id display name, once you are signed in:

![]({{ site.baseurl }}/browser/images/hello-authd.png)

Add a redirect end point to your application

When a user opens the webapp from the Blockstack Browser on an iOS phone, you want the web app to redirect the user to your iOS application. The work you do here will allow it.

From the terminal command line, change directory to your web application directory (hello-blockstack).
If it doesn't ext, create the public directory.
```
$ mkdir public
```
Use the touch command to add a redirect endpoint to your application.

This endpoint on the web version of your app will redirect iOS users back to your mobile app.
```
$ touch public/redirect.html
```
Open redirect.html and add code to the endpoint.
```
<!DOCTYPE html>
<html>
<head>
  <title>Hello, Blockstack!</title>
  <script>
  function getParameterByName(name) {
    var match = RegExp('[?&]' + name + '=([^&]*)').exec(window.location.search);
    return match && decodeURIComponent(match[1].replace(/\+/g, ' '));
  }

  var authResponse = getParameterByName('authResponse')
  window.location="myblockstackapp://?authResponse=" + authResponse
  </script>
<body>
</body>
</html>
```
Blockstack apps are identified by their domain names. The endpoint will receive a get request with the query parameter authResponse=XXXX and should redirect the browser to myblockstackapp:XXXX.

myblockstackapp: is custom protocol handler. The handler should be unique to your application. Your app's web-based authentication uses this handler to redirect the user back to your iOS app. Later, you'll add a reference to this handler in your iOS application.
Close and save the redirect.html file.
Ensure your Blockstack app compiles successfully.

The npm process should detect and compile your change.

Build the hello-blockstack-ios

Now, you build an iOS application that can work with your Blockstack web application on a mobile device.

Create an XCode Project

This tutorial uses XCode 11.1, you can use another version but be aware that some menu items and therefore these procedures may be differœent on your version.

Launch the XCode interface.
Choose Create a new XCode project.
Select iOS.
Select Single View App.
On the Choose options for your new project dialog, set the following:

Product Name hello-blockstack-ios

Organization Name USERNAME

User Interface Storyboard
Press Next.

The system prompts you for a location to store your code.
Save your project in your hello-blockstack-ios directory.
Close XCode.

Product Name	`hello-blockstack-ios`
Organization Name	`USERNAME`
User Interface	Storyboard

Add and edit a Podfile

To use CocoaPods you need to define the XCode target to link them to. So, for exampleM if you are writing an iOS app, it would be the name of your app. Create a target section by writing target $TARGET_NAME do and an end a few lines after.

Open a terminal window on your workstation.
Change directory into your new project directory where your hello-blockstack-ios.xcodeproj file was created.
```
$ cd hello-blockstack-ios
```

Create a Podfile.

$ pod init


 The command creates a `Podfile` in the directory.

Open the Podfile for editing.

Add a line stating the Blockstack dependency.

# Uncomment the next line to define a global platform for your project
# platform :ios, '9.0'

target 'hello-blockstack-ios' do
      # Comment the next line if you're not using Swift and don't want to use dynamic frameworks
      use_frameworks!

      # Pods for hello-blockstack-ios
      pod 'Blockstack'

      target 'hello-blockstack-iosTests' do
        inherit! :search_paths
        # Pods for testing
      end
end

Save and close the Podfile.

Install Blockstack SDK and open the pod project

Close your new XCode project if you haven't already.
In terminal, make sure it is open to the root of your hello-blockstack-ios project.

Initialize the project with Cocoapods via the pod install command.

$ pod install
Analyzing dependencies
Downloading dependencies
Installing Blockstack (1.0.1)
Installing CryptoSwift (0.15.0)
Installing PromisesObjC (1.2.8)
Installing PromisesSwift (1.2.8)
Installing STRegex (2.1.0)
Generating Pods project
Integrating client project

[!] Please close any current XCode sessions and use `hello-blockstack-ios.xcworkspace` for this project from now on.
Sending stats
Pod installation complete! There is 1 dependency from the Podfile and 2 total pods installed.

[!] Automatically assigning platform `ios` with version `11.3` on target `hello-blockstack-ios` because no platform was specified. Please specify a platform for this target in your Podfile. See `https://guides.cocoapods.org/syntax/podfile.html#platform`.


This command creates a number of files

Review the files that the pod installation created:

$ ls
Podfile                hello-blockstack-ios                    hello-blockstack-iosTests
Podfile.lock           hello-blockstack-ios.xcodeproj
Pods                   hello-blockstack-ios.xcworkspace

Start XCode and choose Open another project.
Choose the .xcworkspace file created in your project folder.

When you open the workspace, the system will begin indexing the project. Then, after indexing, you may see a warning indicator at the top in the project title. If you see the warning, continue to step 7. Otherwise, go to the next section.
Click the signal to reveal the warning.
Click Next.
Select all the targets and press Next and Continue when prompted.

Make sure you have no errors; warnings are acceptable to continue.

Choose a custom protocol handler

You'll need to choose a custom protocol handler that is unique to your app. This is so that your app's web-based authentication redirect.html endpoint can redirect the user back to your iOS app. In this example, you use myblockstackapp://.

Open the .xcworkspace file in XCode if it isn't open already.
Select the top node of your project.
Select the Info tab in XCode.
Scroll to URL Types and press + (plus) sign.
Enter an Identifier and URL Schemes value.

| Identifier | MyBlockstackApp | | URL Schemes | myblockstackapp |
Set the Role to Editor.

When you are done the URL Types appears as follows:

Add a splash screen

All iOS applications require a splash page.

Select Assets.xcassets
Move your cursor into the area below Appicon.
Right click and choose New Image Set
Download the Blockstack icon.
Drag the downloaded file into the 3X position in your new Images folder.
Select the LaunchScreen.storyboard.
Choose Open As > Source Code.

Replace the content of the <scenes> element with the following:

<scenes>
    <!--View Controller-->
    <scene sceneID="EHf-IW-A2E">
        <objects>
            <viewController id="01J-lp-oVM" sceneMemberID="viewController">
                <view key="view" contentMode="scaleToFill" id="Ze5-6b-2t3">
                    <rect key="frame" x="0.0" y="0.0" width="375" height="667"/>
                    <autoresizingMask key="autoresizingMask" widthSizable="YES" heightSizable="YES"/>
                    <subviews>
                        <imageView userInteractionEnabled="NO" contentMode="scaleToFill" horizontalHuggingPriority="251" verticalHuggingPriority="251" image="Image" translatesAutoresizingMaskIntoConstraints="NO" id="SpU-hA-y2f">
                            <rect key="frame" x="155.5" y="273" width="64" height="64"/>
                        </imageView>
                        <label opaque="NO" userInteractionEnabled="NO" contentMode="left" horizontalHuggingPriority="251" verticalHuggingPriority="251" text="Hello Blockstack iOS" textAlignment="natural" lineBreakMode="tailTruncation" baselineAdjustment="alignBaselines" adjustsFontSizeToFit="NO" translatesAutoresizingMaskIntoConstraints="NO" id="Wfj-A6-BZM">
                            <rect key="frame" x="108" y="432" width="158" height="21"/>
                            <fontDescription key="fontDescription" type="system" pointSize="17"/>
                            <nil key="textColor"/>
                            <nil key="highlightedColor"/>
                        </label>
                    </subviews>
                    <color key="backgroundColor" red="1" green="1" blue="1" alpha="1" colorSpace="custom" customColorSpace="sRGB"/>
                    <constraints>
                        <constraint firstItem="Wfj-A6-BZM" firstAttribute="centerX" secondItem="6Tk-OE-BBY" secondAttribute="centerX" id="AZy-qf-xHq"/>
                        <constraint firstItem="Wfj-A6-BZM" firstAttribute="top" secondItem="6Tk-OE-BBY" secondAttribute="top" constant="412" id="SwP-qV-1RP"/>
                        <constraint firstItem="SpU-hA-y2f" firstAttribute="centerX" secondItem="6Tk-OE-BBY" secondAttribute="centerX" id="XdI-Db-fDo"/>
                        <constraint firstItem="SpU-hA-y2f" firstAttribute="top" secondItem="6Tk-OE-BBY" secondAttribute="top" constant="253" id="xc5-po-W1E"/>
                    </constraints>
                    <viewLayoutGuide key="safeArea" id="6Tk-OE-BBY"/>
                </view>
            </viewController>
            <placeholder placeholderIdentifier="IBFirstResponder" id="iYj-Kq-Ea1" userLabel="First Responder" sceneMemberID="firstResponder"/>
        </objects>
        <point key="canvasLocation" x="52" y="374.66266866566718"/>
    </scene>
</scenes>

Immediately after scenes but before the close of the </document> tag add the following <resources>.

        <resources>
      <image name="Image" width="64" height="64"/>
        </resources>
     </document>

Choose Run > Run app in the emulator.

The emulator now contains a new splash screen.

Update the Main.storyboard

Rather than have you build up your own UI in the interface builder, this section has you copy and paste a layout into the XML file source code for the Main.storyboard file.

Select the Main.storyboard file.
Choose Open As > Source Code

The hello-blockstack-ios/Base.lproj/Main.storyboard file defines the graphical elements, and their functionality will be defined in a respective .swift file.

Within the <viewController> element, replace the existing <view> subelement with the following:

<view key="view" contentMode="scaleToFill" id="8bC-Xf-vdC">
     <rect key="frame" x="0.0" y="0.0" width="375" height="667"/>
     <autoresizingMask key="autoresizingMask" widthSizable="YES" heightSizable="YES"/>
     <subviews>
         <label opaque="NO" userInteractionEnabled="NO" contentMode="left" horizontalHuggingPriority="251" verticalHuggingPriority="251" text="hello-blockstack-ios" textAlignment="center" lineBreakMode="tailTruncation" baselineAdjustment="alignBaselines" adjustsFontSizeToFit="NO" translatesAutoresizingMaskIntoConstraints="NO" id="9eE-ZS-LU9">
             <rect key="frame" x="0.0" y="101" width="375" height="50"/>
             <color key="backgroundColor" red="0.44735813140000003" green="0.1280144453" blue="0.57268613580000005" alpha="1" colorSpace="custom" customColorSpace="sRGB"/>
             <constraints>
                 <constraint firstAttribute="height" constant="50" id="U5v-13-4Ux"/>
             </constraints>
             <fontDescription key="fontDescription" type="system" pointSize="17"/>
             <color key="textColor" white="1" alpha="1" colorSpace="custom" customColorSpace="genericGamma22GrayColorSpace"/>
             <nil key="highlightedColor"/>
         </label>
         <button opaque="NO" contentMode="scaleToFill" contentHorizontalAlignment="center" contentVerticalAlignment="center" buttonType="roundedRect" lineBreakMode="middleTruncation" translatesAutoresizingMaskIntoConstraints="NO" id="Lfp-KX-BDb">
             <rect key="frame" x="100" y="382" width="175" height="40"/>
             <color key="backgroundColor" red="0.1215686275" green="0.12941176469999999" blue="0.14117647059999999" alpha="1" colorSpace="custom" customColorSpace="sRGB"/>
             <constraints>
                 <constraint firstAttribute="height" constant="40" id="8fN-Ro-Krn"/>
             </constraints>
             <color key="tintColor" white="0.0" alpha="1" colorSpace="calibratedWhite"/>
             <state key="normal" title="Sign into Blocksack">
                 <color key="titleColor" white="1" alpha="1" colorSpace="custom" customColorSpace="genericGamma22GrayColorSpace"/>
             </state>
             <connections>
                 <action selector="signIn:" destination="BYZ-38-t0r" eventType="touchUpInside" id="nV7-rt-euZ"/>
             </connections>
         </button>
     </subviews>
     <color key="backgroundColor" red="1" green="1" blue="1" alpha="1" colorSpace="custom" customColorSpace="sRGB"/>
     <constraints>
         <constraint firstItem="9eE-ZS-LU9" firstAttribute="leading" secondItem="6Tk-OE-BBY" secondAttribute="leading" id="2ZP-tU-h9Y"/>
         <constraint firstItem="9eE-ZS-LU9" firstAttribute="top" secondItem="6Tk-OE-BBY" secondAttribute="top" constant="81" id="DBh-q0-pAV"/>
         <constraint firstItem="6Tk-OE-BBY" firstAttribute="trailing" secondItem="Lfp-KX-BDb" secondAttribute="trailing" constant="100" id="MHO-ew-4Bd"/>
         <constraint firstItem="Lfp-KX-BDb" firstAttribute="leading" secondItem="6Tk-OE-BBY" secondAttribute="leading" constant="100" id="Rsm-LP-ya7"/>
         <constraint firstItem="Lfp-KX-BDb" firstAttribute="top" secondItem="6Tk-OE-BBY" secondAttribute="top" constant="362" id="chE-B7-ya6"/>
         <constraint firstItem="6Tk-OE-BBY" firstAttribute="trailing" secondItem="9eE-ZS-LU9" secondAttribute="trailing" id="j0x-8j-04u"/>
     </constraints>
     <viewLayoutGuide key="safeArea" id="6Tk-OE-BBY"/>
 </view>

Select the Main.storyboard and choose Open as > Interface Builder - Storyboard.

You should see the following:

Add the UI variables to the ViewController file.

In this section, you edit the ViewController.swift file using the storyboard as a starting point.

Select the Main.storyboard and choose Open As > Interface Builder - storyboard.
With the interface builder open, choose Editor > Assistant to edit the ViewController.swift file.
In the storyboard, select the Sign into Blockstack button.
Control-drag from the button to the code display in the editor on the right, stopping the drag at the line below controller's viewDidLoad() statement.
Set the Connection to Outlet.
Name the new section signinButton.
Press Connect.
Repeat with purple hello-blockstack-ios label, name it `nameLabel.

Add an import statement for the Blockstack and another for the SafariServices module.

When you are done, your ViewController.swift file contains the following:

import UIKit
import Blockstack
import SafariServices

class ViewController: UIViewController {

    override func viewDidLoad() {
        super.viewDidLoad()
        // Do any additional setup after loading the view.
    }

        @IBOutlet weak var nameLabel: UILabel!
        @IBOutlet var signinButton: UIButton!

}

And XCode has added two outlines to the Main.storyboard source.

<connections>
<outlet property="nameLabel" destination="9eE-ZS-LU9" id="Ahv-Te-ZZo"/>
<outlet property="signinButton" destination="Lfp-KX-BDb" id="yef-Jj-uPt"/>
</connections>

Your connectors will have their own destination and id values.

Edit the ViewController.swift file

Now, you are ready to connect your application with your Blockstack Web Application. Normally, after building your Web application you would have registred it with Blockstack and the app would be available on the Web. This example skips this registration step and uses an example application we've already created for you:

https://heuristic-brown-7a88f8.netlify.com/redirect.html

This web application already has a redirect in place for you. You'll reference this application in your mobile add for now. In XCode, do the following;

Open the ViewController.swift file.
Add an import both for Blockstack.
```
  import UIKit
  import Blockstack
```

Add a private updateUI() function.

This function takes care of loading the user data from Blockstack.

private func updateUI() {
    DispatchQueue.main.async {
        if Blockstack.shared.isUserSignedIn() {
            // Read user profile data
            let retrievedUserData = Blockstack.shared.loadUserData()
            print(retrievedUserData?.profile?.name as Any)
            let name = retrievedUserData?.profile?.name ?? "Nameless Person"
            self.nameLabel?.text = "Hello, \(name)"
            self.nameLabel?.isHidden = false
            self.signinButton?.setTitle("Sign Out", for: .normal)
            print("UI update SIGNED_IN")
        } else {
            self.nameLabel?.text = "hello-blockstack-ios"
            self.signinButton?.setTitle("Sign into Blockstack", for: .normal)
            print("UI update SIGNED_OUT")
        }
    }
}

The function uses the Blockstack.shared.isUserSignedIn() method to determine if the user is already logged into Blockstack or not. It then uses the Blockstack.shared.loadUserData() method to load the user data and update the application display with the username.

Replace the content of the viewDidLoad() function so that it calls this private function.

override func viewDidLoad() {
    super.viewDidLoad()
    // Do any additional setup after loading the view, typically from a nib.
    self.updateUI()
}

Create a signIn() function that handles both sign in and out.

The function uses the Blockstack.shared.signIn() and Blockstack.shared.signUserOut() methods to sign the user into the application.

@IBAction func signIn(_ sender: UIButton) {
   if Blockstack.shared.isUserSignedIn() {
       print("Currently signed in so signing out.")
       Blockstack.shared.signUserOut()
       self.updateUI()
   } else {
       print("Currently signed out so signing in.")
       // Address of deployed example web app
       Blockstack.shared.signIn(redirectURI: URL(string: "https://heuristic-brown-7a88f8.netlify.com/redirect.html")!,
                                appDomain: URL(string: "https://heuristic-brown-7a88f8.netlify.com")!) { authResult in
                                   switch authResult {
                                   case .success(let userData):
                                       print("Sign in SUCCESS", userData.profile?.name as Any)
                                       self.updateUI()
                                   case .cancelled:
                                       print("Sign in CANCELLED")
                                   case .failed(let error):
                                       print("Sign in FAILED, error: ", error ?? "n/a")
                                   }
       }
   }

}

Troubleshooting your build in XCode

XCode builds can retain old data. To ensure your builds are clean, try the following:

Reset the simulator by choosing Hardware -> Erase all content and settings from the menu.
In XCode, clean the project by choosing Product > Clean from the menu or press Command + Shift + K on your keyboard.
Clean the build folder by pressing Command + Option + Shift + K on your keyboard.
Run the code on the simulator again.

27 KiB Raw Blame History