Browse Source

daemon/test: speed up and clean up tests.

They would sometimes fail under load, if using valgrind.  Retry
properly rather than relying on random sleeps.  Also, takes "make
check" running time here from 1m31.864s to 1m16.872s.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
ppa-0.6.1
Rusty Russell 9 years ago
parent
commit
effcb73a48
  1. 171
      daemon/test/test.sh

171
daemon/test/test.sh

@ -88,6 +88,26 @@ lcli2()
$LCLI2 "$@"
}
# Usage: <node responsible> <cmd to test>...
check()
{
local i=0
local node="$1"
shift
while ! eval "$@"; do
# Try making time pass for the node (if on mocktime), then sleeping.
if [ -n "$MOCKTIME" ]; then
MOCKTIME=$(($MOCKTIME + 1))
$node dev-mocktime $MOCKTIME
fi
sleep 1
i=$(($i + 1))
if [ $i = 20 ]; then
return 1
fi
done
}
check_status_single()
{
lcli="$1"
@ -98,7 +118,7 @@ check_status_single()
them_fee=$6
them_htlcs="$7"
if $lcli getpeers | tr -s '\012\011 ' ' ' | $FGREP '"our_amount" : '$us_pay', "our_fee" : '$us_fee', "their_amount" : '$them_pay', "their_fee" : '$them_fee', "our_htlcs" : [ '"$us_htlcs"'], "their_htlcs" : [ '"$them_htlcs"']'; then :; else
if check $lcli "$lcli getpeers | tr -s '\012\011\" ' ' ' | $FGREP \"our_amount : $us_pay, our_fee : $us_fee, their_amount : $them_pay, their_fee : $them_fee, our_htlcs : [ $us_htlcs], their_htlcs : [ $them_htlcs]\""; then :; else
echo Cannot find $lcli output: '"our_amount" : '$us_pay', "our_fee" : '$us_fee', "their_amount" : '$them_pay', "their_fee" : '$them_fee', "our_htlcs" : [ '"$us_htlcs"'], "their_htlcs" : [ '"$them_htlcs"']' >&2
$lcli getpeers | tr -s '\012\011 ' ' ' >&2
return 1
@ -123,7 +143,7 @@ check_staged()
lcli="$1"
num_htlcs="$2"
if $lcli getpeers | tr -s '\012\011 ' ' ' | $FGREP '"staged_changes" : '$num_htlcs; then :; else
if check $lcli "$lcli getpeers | tr -s '\012\011\" ' ' ' | $FGREP 'staged_changes : '$num_htlcs"; then :; else
echo Cannot find $lcli output: '"staged_changes" : '$num_htlcs >&2
$lcli getpeers | tr -s '\012\011 ' ' ' >&2
return 1
@ -132,19 +152,17 @@ check_staged()
check_tx_spend()
{
$CLI generate 1
if [ $($CLI getblock $($CLI getbestblockhash) | grep -c '^ "') -gt 1 ]; then
:
if check "$1" "$CLI getrawmempool | $FGREP '\"'"; then :;
else
echo "Block didn't include tx:" >&2
$CLI getblock $($CLI getbestblockhash) >&2
echo "No tx in mempool:" >&2
$CLI getrawmempool >&2
exit 1
fi
}
check_peerstate()
{
if $1 getpeers | $FGREP -w $2; then :
if check "$1" "$1 getpeers | $FGREP -w $2"; then :
else
echo "$1" not in state "$2": >&2
$1 getpeers >&2
@ -154,7 +172,7 @@ check_peerstate()
check_peerconnected()
{
if $1 getpeers | $FGREP -w '"connected" : '$2; then :
if check "$1" "$1 getpeers | tr -s '\012\011\" ' ' ' | $FGREP -w 'connected : '$2"; then :
else
echo "$1" not connected "$2": >&2
$1 getpeers >&2
@ -164,7 +182,7 @@ check_peerconnected()
check_no_peers()
{
if $1 getpeers | tr -s '\012\011 ' ' ' | $FGREP '"peers" : [ ]'; then :
if check "$1" "$1 getpeers | tr -s '\012\011\" ' ' ' | $FGREP 'peers : [ ]'"; then :
else
echo "$1" still has peers: >&2
$1 getpeers >&2
@ -216,24 +234,15 @@ else
$PREFIX ../lightningd --lightning-dir=$DIR2 > $REDIR2 2> $REDIRERR2 &
fi
i=0
while ! $LCLI1 getlog 2>/dev/null | $FGREP Hello; do
sleep 1
i=$(($i + 1))
if [ $i -gt 10 ]; then
echo Failed to start daemon 1 >&2
exit 1
fi
done
if ! check "$LCLI1" "$LCLI1 getlog 2>/dev/null | $FGREP Hello"; then
echo Failed to start daemon 1 >&2
exit 1
fi
while ! $LCLI2 getlog 2>/dev/null | $FGREP 'listener on port'; do
sleep 1
i=$(($i + 1))
if [ $i -gt 10 ]; then
echo Failed to start daemon 2 >&2
exit 1
fi
done
if ! check "$LCLI2" "$LCLI2 getlog 2>/dev/null | $FGREP Hello"; then
echo Failed to start daemon 2 >&2
exit 1
fi
ID1=`$LCLI1 getlog | sed -n 's/.*"ID: \([0-9a-f]*\)".*/\1/p'`
ID2=`$LCLI2 getlog | sed -n 's/.*"ID: \([0-9a-f]*\)".*/\1/p'`
@ -244,73 +253,55 @@ PORT2=`$LCLI2 getlog | sed -n 's/.*on port \([0-9]*\).*/\1/p'`
P2SHADDR=`$LCLI1 newaddr | sed -n 's/{ "address" : "\(.*\)" }/\1/p'`
TXID=`$CLI sendtoaddress $P2SHADDR 0.01`
TX=`$CLI getrawtransaction $TXID`
$CLI generate 1
lcli1 connect localhost $PORT2 $TX
sleep 5
# Expect them to be waiting for anchor.
check_peerstate lcli1 STATE_OPEN_WAITING_OURANCHOR
check_peerstate lcli2 STATE_OPEN_WAITING_THEIRANCHOR
if [ -n "$TIMEOUT_ANCHOR" ]; then
# Anchor gets 1 commit.
check_tx_spend
# Check anchor emitted, not mined deep enough.
check_tx_spend lcli1
$CLI generate 2
# Timeout before anchor committed deep enough.
TIME=$((`date +%s` + 7200 + 3 * 1200 + 1))
# Timeout before anchor committed.
MOCKTIME=$((`date +%s` + 7200 + 3 * 1200 + 1))
lcli1 dev-mocktime $TIME
lcli1 dev-mocktime $MOCKTIME
# This will crash immediately
if $LCLI2 dev-mocktime $TIME 2> /dev/null; then
if $LCLI2 dev-mocktime $MOCKTIME 2> /dev/null; then
echo Node2 did not crash >&2
exit 1
fi
$FGREP 'Entered error state STATE_ERR_ANCHOR_TIMEOUT' $DIR2/crash.log
sleep 2
# It should send out commit tx.
# Node1 should be disconnected.
check_peerconnected lcli1 false
# Generate a block (should include commit tx)
check_tx_spend
# Should be handling it now.
TIME=$(($TIME + 1))
lcli1 dev-mocktime $TIME
sleep 1
# It should send out commit tx; mine it.
check_tx_spend lcli1
$CLI generate 1
check_peerstate lcli1 STATE_CLOSE_ONCHAIN_OUR_UNILATERAL
# Now "wait" for 1 day, which is what node2 asked for on commit.
TIME=$(($TIME + 24 * 60 * 60 - 1))
lcli1 dev-mocktime $TIME
MOCKTIME=$(($MOCKTIME + 24 * 60 * 60 - 1))
lcli1 dev-mocktime $MOCKTIME
# Move bitcoind median time as well, so CSV moves.
$CLI setmocktime $TIME
$CLI setmocktime $MOCKTIME
$CLI generate 6
# Due to laziness, we trigger by block generation.
TIME=$(($TIME + 1))
lcli1 dev-mocktime $TIME
sleep 2
# Sometimes it skips poll because it's busy. Do it again.
TIME=$(($TIME + 1))
lcli1 dev-mocktime $TIME
sleep 2
check_peerstate lcli1 STATE_CLOSE_ONCHAIN_OUR_UNILATERAL
# Now it should have spent the commit tx.
check_tx_spend
check_tx_spend lcli1
# 99 more blocks pass...
$CLI generate 99
TIME=$(($TIME + 1))
lcli1 dev-mocktime $TIME
sleep 5
# 100 blocks pass...
$CLI generate 100
MOCKTIME=$(($MOCKTIME + 1))
lcli1 dev-mocktime $MOCKTIME
# Considers it all done now.
check_no_peers lcli1
@ -318,13 +309,10 @@ if [ -n "$TIMEOUT_ANCHOR" ]; then
lcli1 stop
all_ok
fi
# Now make it pass anchor (should be in first block, then two more to bury it)
check_tx_spend
$CLI generate 2
# They poll every second, so give them time to process.
sleep 2
# Now make it pass anchor (should be in mempool: three blocks bury it)
check_tx_spend lcli1
$CLI generate 3
check_peerstate lcli1 STATE_NORMAL
check_peerstate lcli2 STATE_NORMAL
@ -372,10 +360,11 @@ if [ -n "$DUMP_ONCHAIN" ]; then
check_peerconnected lcli1 false
# lcli1 should have sent out commitment tx
check_tx_spend
check_peerstate lcli1 STATE_ERR_BREAKDOWN
check_tx_spend lcli1
# Now lcli2 sees it.
sleep 1
# Mine it.
$CLI generate 1
check_peerstate lcli1 STATE_CLOSE_ONCHAIN_OUR_UNILATERAL
check_peerstate lcli2 STATE_CLOSE_ONCHAIN_THEIR_UNILATERAL
@ -387,23 +376,18 @@ if [ -n "$DUMP_ONCHAIN" ]; then
$CLI generate 6
# Now, lcli1 should spend its own output.
sleep 2
check_tx_spend
check_tx_spend lcli1
check_peerstate lcli1 STATE_CLOSE_ONCHAIN_OUR_UNILATERAL
# Move bitcoind's time so HTLC has expired.
$CLI setmocktime $(($EXPIRY + 1))
$CLI generate 6
# Wait for nodes to notice
sleep 2
# lcli1 should have gotten HTLC back.
check_tx_spend
check_tx_spend lcli1
# Now, after 100 blocks, should all be concluded.
$CLI generate 100
sleep 5
# Both consider it all done now.
check_no_peers lcli1
@ -458,13 +442,14 @@ A_FEE=$(($A_FEE + $EXTRA_FEE))
check_status $A_AMOUNT $A_FEE '{ "msatoshis" : '$HTLC_AMOUNT', "expiry" : { "second" : '$EXPIRY' }, "rhash" : "'$RHASH'" } ' $B_AMOUNT $B_FEE ""
# Make sure node1 accepts the expiry packet.
lcli1 dev-mocktime $(($EXPIRY))
MOCKTIME=$(($EXPIRY))
lcli1 dev-mocktime $MOCKTIME
# This should make node2 send it.
lcli2 dev-mocktime $(($EXPIRY + 31))
MOCKTIME=$(($MOCKTIME + 31))
lcli2 dev-mocktime $MOCKTIME
lcli2 commit $ID1
lcli1 commit $ID2
sleep 1
# Back to how we were before.
A_AMOUNT=$(($A_AMOUNT + $EXTRA_FEE + $HTLC_AMOUNT))
@ -473,17 +458,12 @@ check_status $A_AMOUNT $A_FEE "" $B_AMOUNT $B_FEE ""
lcli1 close $ID2
sleep 1
# They should be waiting for close.
check_peerstate lcli1 STATE_CLOSE_WAIT_CLOSE
check_peerstate lcli2 STATE_CLOSE_WAIT_CLOSE
$CLI generate 1
# Make sure they saw it!
lcli1 dev-mocktime $(($EXPIRY + 32))
lcli2 dev-mocktime $(($EXPIRY + 32))
sleep 1
check_peerstate lcli1 STATE_CLOSE_ONCHAIN_MUTUAL
check_peerstate lcli2 STATE_CLOSE_ONCHAIN_MUTUAL
@ -491,18 +471,11 @@ check_peerstate lcli2 STATE_CLOSE_ONCHAIN_MUTUAL
$CLI generate 98
# Make sure they saw it!
lcli1 dev-mocktime $(($EXPIRY + 33))
lcli2 dev-mocktime $(($EXPIRY + 33))
sleep 5
check_peerstate lcli1 STATE_CLOSE_ONCHAIN_MUTUAL
check_peerstate lcli2 STATE_CLOSE_ONCHAIN_MUTUAL
# Now the final one.
$CLI generate 1
TIME=$(($EXPIRY + 34))
lcli1 dev-mocktime $TIME
lcli2 dev-mocktime $TIME
sleep 2
check_no_peers lcli1
check_no_peers lcli2

Loading…
Cancel
Save