Someone could try to announce an internal address, and we might probe
it.
This breaks tests, so we add '--dev-allow-localhost' for our tests, so
we don't eliminate that one. Of course, now we need to skip some more
tests in non-developer mode.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we're given a wildcard address, we can't announce it like that: we need
to try to turn it into a real address (using guess_address). Then we
use that address. As a side-effect of this cleanup, we only announce
*any* '--addr' if it's routable.
This fix means that our tests have to force '--announce-addr' because
otherwise localhost isn't routable.
This means that gossipd really controls the addresses now, and breaks
them into two arrays: what we bind to, and what we announce. That is
now what we return to the master for json_getinfo(), which prints them
as 'bindings' and 'addresses' respectively.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Add special option where an empty host means 'wildcard for IPv4 and/or IPv6'
which means ':1234' can be used to set only the portnum.
2. Only add this protocol wildcard if --autolisten=1 (default)
and no other addresses specified.
3. Pass it down to gossipd, so it can handle errors correctly: in most cases,
it's fatal not to be able to bind to a port, but for this case, it's OK
if we can only bind to one of IPv4/v6 (fatal iff neither).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was something @icota implemented, but it fits logically into this
cleanup series. We create a new type which is the internal generalization
of a wireaddr (which is defined by the spec), and add a case here for
a socket name.
Based-on-the-true-story-by: @icota
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's become clear that our network options are insufficient, with the coming
addition of Tor and unix domain support.
Currently:
1. We always bind to local IPv4 and IPv6 sockets, unless --port=0, --offline,
or any address is specified explicitly. If they're routable, we announce.
2. --addr is used to announce, but not to control binding.
After this change:
1. --port is deprecated.
2. --addr controls what we bind to and announce.
3. --bind-addr/--announce-addr can be used to control one and not the other.
4. Unless --autolisten=0, we add local IPv4 & IPv6 port 9735 (and announce if they are routable).
5. --offline still overrides listening (though announcing is still the same).
This means we can bind to as many ports/interfaces as we want, and for
special effects we can announce different things (eg. we're sitting
behind a port forward or a proxy).
What remains to implement is semi-automatic binding: we should be able
to say '--addr=0.0.0.0:9999' and have the address resolve at bind
time, or even '--addr=0.0.0.0:0' and have the port autoresolve too
(you could determine what it was from 'lightning-cli getinfo'.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No new functionality, just a continuation of my work toward completing #665.
I removed the common members of `struct withdrawal` and `struct fund_channel`
and placed them in a new `struct wallet_tx`. Then it was fairly straightforward
to reimplement the existing code in terms of `wallet_tx`.
Since I made some structural changes I wanted to get this approved before I
go any farther.
Added 'all' to fundchannel help message.
This means that openingd and closingd now forward our gossip. But the real
reason we want to do this is that it gives an easy way for gossipd to kill
any active daemon, by closing its fd: previously closingd and openingd didn't
read the fd, so tended not to notice.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This was sitting in my gossip-enchancement patch queue, but it simplifies
this set too, so I moved it here).
In 94711969f we added an explicit gossip_index so when gossipd gets
peers back from other daemons, it knows what gossip it has sent (since
gossipd can send gossip after the other daemon is already complete).
This solution is insufficient for the more general case where gossipd
wants to send other messages reliably, so replace it with the other
solution: have gossipd drain the "gossip fd" which the daemon returns.
This turns out to be quite simple, and is probably how I should have
done it originally :(
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These were so far only used for bolt11 construction, but we'll need them for the
DNS seed as well, so here we just pull them out into their own unit and prefix
them.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Just a small cleanup of the indentation code, so we don't have to reformat all
the issue reports to become readable. This is much closer to what `jq` or
`json_pp` spit out and doesn't have those infinitely long lines.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We can have more than one; eg we might offer both bech32 and a p2sh
address, and in future we might offer v1 segwit, etc.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is probably covered by our "channel capacity" heuristic which
requires the channel be significant, but best to be explicit and sure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, the main daemon and subdaemons share the backtrace code,
with hooks for logging.
The daemon hook inserts the io_poll override, which means we no longer
need io_debug.[ch]. Though most daemons don't need it, they still link
against ccan/io, so it's harmess (suggested by @ZmnSCPxj).
This was tested manually to make sure we get backtraces still.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I didn't convert all tests: they can still use a standalone context.
It's just marginally more efficient to share the libwally one for all
our daemons which link against it anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The overflow check `mul_overflows_s64(int64_t, int64_t)` overflows.
Since this is an signed integer overflow this triggers UB, which
in turn means that we cannot trust the check.
Luckily mul_overflows_s64(int64_t, int64_t) is unused. Removing it.
We don't handle \u, since we assume everyone sane is using UTF-8. We'd
still have to reject '\u0000' and maybe other weird cases if we did.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we're going to simply take() a pointer, don't allocate it off a random
object. Using NULL makes our intent clear, particularly with allocating
packets we're going to take() onto a queue.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I did a brief audit of tmpctx uses, and we do leak them in various
corner cases. Fortunely, all our daemons are based on some kind of
I/O loop, so it's fairly easy to clean a global tmpctx at that point.
This makes things a bit neater, and slightly more efficient, but also
clearer: I avoided creating a tmpctx in a few places because I didn't
want to add another allocation. With that penalty removed, I can use
it more freely and hopefully write clearer code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now it just returns true if it queued something. This allows it
to queue multiple packets, and lets it share code paths with other code
in future patches.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As we add more features, the current code is insufficient.
1. Keep an array of single feature bits, for easy switching on and off.
2. Create feature_offered() which checks for both compulsory and optional
variants.
3. Invert requires_unsupported_features() and unsupported_features()
which tend to be double-negative, all_supported_features() and
features_supported().
4. Move single feature definition from wire/peer_wire.h to common/features.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Mark Beckwith
practicalswift
Christian Decker
Justin Litchfield
conanoc