This fixes block parsing on testnet; specifically, non-standard tx versions.
We hit a type bug in libwally (wallt_get_secp_context()) which I had to
work around for the moment, and the updated libsecp adds an optional hash
function arg to the ECDH function.
Fixes: #2563
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I tried to just do gossipd, but it was uncontainable, so this ended up being
a complete sweep.
We didn't get much space saving in gossipd, even though we should save
24 bytes per node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Node ids are pubkeys, but we only use them as pubkeys for routing and checking
gossip messages. So we're packing and unpacking them constantly, and wasting
some space and time.
This introduces a new type, explicitly the SEC1 compressed encoding
(33 bytes). We ensure its validity when we load from the db, or get it
from JSON. We still use 'struct pubkey' for peer messages, which checks
validity.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
39475-39572(39518+/-36),2880732,41.150000-41.390000(41.298+/-0.085),2.260000-2.550000(2.336+/-0.11),44.390000-65.150000(58.648+/-7.5),32.740000-33.020000(32.89+/-0.093),44.130000-45.090000(44.566+/-0.32)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I tried to fundchannel 0.01btc, and of course it wanted 8 decimals exactly.
If I can't get this right, it's probably a bad idea.
I still don't allow whole number of btc though, since that's probably a mistake
and you're not supposed to put that much in c-lightning yet :)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a side-effect of using amount_msat in gossipd/routing.c, we explicitly
handle overflows and don't need to pre-prune ridiculous-fee channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The current param_sat accepts "any": rename and move that to invoice.c
where it's called. We rename it to param_msat_or_any and invoice.c
is our first (trivial) amount_msat user.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They're generally used pass-by-copy (unusual for C structs, but
convenient they're basically u64) and all possibly problematic
operations return WARN_UNUSED_RESULT bool to make you handle the
over/underflow cases.
The new #include in json.h means we bolt11.c sees the amount.h definition
of MSAT_PER_BTC, so delete its local version.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
jsmn would accept invalid JSON objects. This is bad because it would
set ->size incorrectly: we expect to have at least size * 2 tokens (in
pairs). We want to rely on ->size, but this would create an exploitable
buffer overflow!
Fortunately, this is fixed upstream, so we add a test and upgrade to v1.0.0.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Wasn't using valid JSON, but worked anyway. This is actually OK
because we don't rely on tok->size, but we want to, so another fix
coming.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The external/jsmn/README.md only says:
int size; // Number of child (nested) tokens
But it only counts *direct* children, or *direct* members for an object.
This test verifies this (the bug proved to be elsewhere: see next patch!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is mainly just copying over the copy-editing from the
lightning-rfc repository.
[ Split to just perform changes after the UNKNOWN_PAYMENT_HASH change --RR ]
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Reported-by: Rusty Russell <@rustyrussell>
Handers of a specific form are both designed to be used as callbacks
for param(), and also dispose of the command if something goes wrong.
Make them return the 'struct command_result *' from command_failed(),
or NULL.
Renaming them just makes sense: json_tok_XXX is used for non-command-freeing
parsers too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These routines free the 'struct command': a common coding error is not
to return immediately.
To catch this, we make them return a non-NULL 'struct command_result
*', and we're going to make the command handlers return the same (to
encourage 'return command_fail(...)'-style usage).
We also provide two sources for external use:
1. command_param_failed() when param() fails.
2. command_its_complicated() for some complex cases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was removed (as unused) in 6269a4c55d592e8720b7f2a304c21f61f7931238;
now I've even added tests.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
json_escaped.[ch], param.[ch] and jsonrpc_errors.h move from lightningd/
to common/. Tests moved too.
We add a new 'common/json_tok.[ch]' for the common parameter parsing
routines which a plugin might want, taking them out of
lightningd/json.c (which now only contains the lightningd-specific
ones).
The rest is mainly fixing up includes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
json_tok* is used with 'struct command', so rename this to match the other
low-level json tok helpers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is prep work for when we sign htlc txs with
SIGHASH_SINGLE|SIGHASH_ANYONECANPAY.
We still deal with raw signatures for the htlc txs at the moment, since
we send them like that across the wire, and changing that was simply too
painful (for the moment?).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We probably also want to call secp_randomise/wally_secp_randomize here
too, and since these calls all call setup_tmpctx, it probably makes
sense to have a helper function to do all that. Until thats done, I
modified the tests so grepping will show the places where the sequence
of calls is repeated.
Signed-off-by: Jon Griffiths <jon_p_griffiths@yahoo.com>
It's the only user of them, and it's going to get optimized.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
gossip.pydiff --git a/common/test/run-json.c b/common/test/run-json.c
index 956fdda35..db52d6b01 100644
Totally forgot to add this test. It just shows how a writer can take
exclusive access of a socket over multiple `io_write` calls, and
queuing all others behind it.
It turns out we were heavily relying on the fact that after each message from
the client there'd be a flush, and that there would not be anything after the
JSON object we read. This will no longer be the case once we start streaming
things or we are very quick in issuing the JSON-RPC requests.
This just takes one of the error paths (incomplete read) and makes it into a
successful path if we have indeed read a full root element.
To be safe, we should never memcmp secrets. We don't do this
currently outside tests, but we're about to.
The tests to prove this as constant time are the tricky bit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
tal_count() is used where there's a type, even if it's char or u8, and
tal_bytelen() is going to replace tal_len() for clarity: it's only needed
where a pointer is void.
We shim tal_bytelen() for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Often we only need a single secret, so it's clearer to have routines
to do just that. When we change to the lnd key scheme, there will be
no benefit in calculating them all together.
This also adds a test!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
structeq() is too dangerous: if a structure has padding, it can fail
silently.
The new ccan/structeq instead provides a macro to define foo_eq(),
which does the right thing in case of padding (which none of our
structures currently have anyway).
Upgrade ccan, and use it everywhere. Except run-peer-wire.c, which
is only testing code and can use raw memcmp(): valgrind will tell us
if padding exists.
Interestingly, we still declared short_channel_id_eq, even though
we didn't define it any more!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. We need to test all bits, not all bytes.
2. Both local and global features need to be supported.
3. Untested code is broken code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Risks leakage. We could do lookup via the proxy, but that's a TODO.
There's only one occurance of getaddrinfo (and no gethostbyname), so
we add a flag to the callers.
Note: the use of --always-use-proxy suppresses *all* DNS lookups, even
those from connect commands and the command line.
FIXME: An implicit setting of use_proxy_always is done in gossipd if it
determines that we are announcing nothing but Tor addresses, but that
does *not* suppress 'connect'.
This is fixed in a later patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Lawrence Nahum
Christian Decker
Mark Beckwith
Jon Griffiths
practicalswift