This was incorrectly handled before, hence the wrapper which checks
correctness of the arguments.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
- Related Changes for `warning` notification
Add a `bool` type parameter in `log_()` and `lov()`, this `bool` flag
indicates if we should call `warning` notifier.
1) The process of copying `log_book` of every peer to the `log_book` of
`ld` is usually included in `log_()` and `lov()`, and it may lead to
repeated `warning` notification. So a `bool`, which explicitly indicates
if the `warning` notification is disabled during this call, is necessary
.
2) The `LOG_INFO` and `LOG_DEBUG` level don't need to call
warning, so set that `bool` paramater as `FALSE` for these log level and
only set it as `TRUE` for `LOG_UNUAUSL`/`LOG_BROKEN`. As for `LOG_IO`,
it use `log_io()` to log, so we needn't think about notifier for it.
We reserve inputs when we're going to send a transaction, but we don't
unreserve them if we crash. This is most graphically demonstrated by
the txprepare case, which makes it easier to trigger.
Instead, we should query bitcoind to see whether the tx made it out or
not, as we would do manually with dev-rescan-outputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows you to prepare a tx, then release or discard it later.
Shares almost all the code with json_withdraw (which is now technically
superfluous).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently allocate utxos off cmd, but the next commit will persist a
wtx beyond the command which created it, breaking that assumption.
In general, a struct member should be owned by the struct itself, and
a tal context should be an explicit arg, not implicit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We generally want to do as much validation as possible inside
parameter parsing, as that means the 'check' command detects more
erroneous uses. In this case, we can try to interpret the destination
address as soon as we encounter it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a side-effect, we now only add txfilters for addresses we actually
expose, rather than always filtering for both p2sh and native segwit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It would always return bech32; fix that, and don't bother printing
it if they use the (new) 'all' parameter.
This API was introduced in 3e67c09d5e,
which means it wasn't in a release so no CHANGELOG entry necessary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Keeping the uintmap ordering all the broadcastable messages is expensive:
130MB for the million-channels project. But now we delete obsolete entries
from the store, we can have the per-peer daemons simply read that sequentially
and stream the gossip itself.
This is the most primitive version, where all gossip is streamed;
successive patches will bring back proper handling of timestamp filtering
and initial_routing_sync.
We add a gossip_state field to track what's happening with our gossip
streaming: it's initialized in gossipd, and currently always set, but
once we handle timestamps the per-peer daemon may do it when the first
filter is sent.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Encapsulating the peer state was a win for lightningd; not surprisingly,
it's even more of a win for the other daemons, especially as we want
to add a little gossip information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A new string field is added to the command structure and is specified at the creation of each native command, and in the JSON created by 'json_add_help_command()'.
New fields don't have to be spelled out twice.
The raw version are called _only, so we don't miss a call
accidentally. We can rename them when we finally deprecated old
fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of lightningd telling us when it's ready, we ask it.
This also provides an opportunity to have a plugin hook at this point.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The original idea is to "tal" channel on the "ctx"(In fact, we'd like to set ctx as "ld").
But we already tal channel on "ld" in new_channel(), so "ctx" is unused.
These are always handed to subdaemons as a set, so group them. This makes
it easier to add an fd (in the next patch).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The chainparams are needed to know the prefixes, so instead of passing down
the testnet, we pass the entire params struct.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
68fe5eacde introduced a skip in the iteration
of the available funds, which means utxos[i] may be off the end of utxos.
Reported-and-debugged-by: @nitramiz
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The old value of 1000 sat was too small to cover the dust reserves.
This lead to the situation when trying to open a channel with minimal
amount, the channels got refused because they were not able cover the
commitment fees.
For this reason the minimal capacity should be increased to i.e. 10k
satoshi, as the technical minimum that also accounts for fees and
reserves is somewhere around 6k sat.
This fixes block parsing on testnet; specifically, non-standard tx versions.
We hit a type bug in libwally (wallt_get_secp_context()) which I had to
work around for the moment, and the updated libsecp adds an optional hash
function arg to the ECDH function.
Fixes: #2563
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to make it async, so start by moving the core code into
invoice.c and having that directly call fail/success functions for the
htlc.
We add an extra check in fulfill_htlc() that the HTLC state is correct:
that can't happen now, but may once we're async.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We'd like to display the receive and resolution times in the forwardings
table. In order to remember the receive time we need to store it in the DB
along with the other information.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
I tried to just do gossipd, but it was uncontainable, so this ended up being
a complete sweep.
We didn't get much space saving in gossipd, even though we should save
24 bytes per node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Node ids are pubkeys, but we only use them as pubkeys for routing and checking
gossip messages. So we're packing and unpacking them constantly, and wasting
some space and time.
This introduces a new type, explicitly the SEC1 compressed encoding
(33 bytes). We ensure its validity when we load from the db, or get it
from JSON. We still use 'struct pubkey' for peer messages, which checks
validity.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
39475-39572(39518+/-36),2880732,41.150000-41.390000(41.298+/-0.085),2.260000-2.550000(2.336+/-0.11),44.390000-65.150000(58.648+/-7.5),32.740000-33.020000(32.89+/-0.093),44.130000-45.090000(44.566+/-0.32)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pubkeys are not not actually DER encoding, but Pieter Wuille corrected
me: it's SEC 1 documented encoding.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
38922-39297(39180.6+/-1.3e+02),2880728,41.040000-41.160000(41.106+/-0.05),2.270000-2.530000(2.338+/-0.097),44.570000-53.980000(49.696+/-3),32.840000-33.080000(32.95+/-0.095),43.060000-44.950000(43.696+/-0.72)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
- add config value min_capacity_sat that will replaces the magic value
min_effective_htlc_capacity = AMOUNT_MSAT(1000000)
- add config switch min_capacity_sat
wallet/test/run-wallet was failing the valgrind check; turns out
`sqlite3_expanded_sql` expects you to manage the memory of strings
it returns. from `sqlite3.h`:
** ^The string returned by sqlite3_expanded_sql(P), on the other hand,
** is obtained from [sqlite3_malloc()] and must be free by the application
** by passing it to [sqlite3_free()].
Adding a giant IO message simply causes it to be pruned immediately,
so truncate it if it's more than 1/64 the max size.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>