No more sending "all-channel" errors; in particular, gossipd now only
sends warnings (which make us hang up), not errors, and peer_connected
rejections are warnings (and disconnect), not errors.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Plugins: `peer_connected` rejections now send a warning, not an error, to the peer.
We should actually be including this (as it may define _GNU_SOURCE
etc) before any system headers. But where we include <assert.h> we
often didn't, because check-includes would complain that the headers
included it too.
Weaken that check, and include config.h in C files before assert.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Took me a while (stressing under valgrind) to reproduce this,
then longer to figure out how it happened.
Turns out io_new_conn() can fail if the init function fails.
In our case, this can happen if connect() immediately returns
an error (inside io_connect). But we've already set the finish
function, which (if this was the last address), will free connect,
making the assignment `connect->conn = ...` write to a freed address.
Either way, if it fails, try_connect_one_addr() has taken care to
update connect->conn, or free connect, and the caller should not do it.
Here's the valgrind trace:
```
==384981== Invalid write of size 8
==384981== at 0x11127C: try_connect_one_addr (connectd.c:880)
==384981== by 0x112BA1: destroy_io_conn (connectd.c:708)
==384981== by 0x141459: destroy_conn (poll.c:244)
==384981== by 0x14147F: destroy_conn_close_fd (poll.c:250)
==384981== by 0x149EB9: notify (tal.c:240)
==384981== by 0x149F8B: del_tree (tal.c:402)
==384981== by 0x14A51A: tal_free (tal.c:486)
==384981== by 0x140036: io_close (io.c:450)
==384981== by 0x1400B3: do_plan (io.c:401)
==384981== by 0x140134: io_ready (io.c:423)
==384981== by 0x141A57: io_loop (poll.c:445)
==384981== by 0x112CB0: main (connectd.c:1703)
==384981== Address 0x4d67020 is 64 bytes inside a block of size 160 free'd
==384981== at 0x483CA3F: free (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==384981== by 0x14A020: del_tree (tal.c:421)
==384981== by 0x14A51A: tal_free (tal.c:486)
==384981== by 0x1110C5: try_connect_one_addr (connectd.c:806)
==384981== by 0x112BA1: destroy_io_conn (connectd.c:708)
==384981== by 0x141459: destroy_conn (poll.c:244)
==384981== by 0x14147F: destroy_conn_close_fd (poll.c:250)
==384981== by 0x149EB9: notify (tal.c:240)
==384981== by 0x149F8B: del_tree (tal.c:402)
==384981== by 0x14A51A: tal_free (tal.c:486)
==384981== by 0x140036: io_close (io.c:450)
==384981== by 0x1405DC: io_connect_ (io.c:345)
==384981== Block was alloc'd at
==384981== at 0x483B7F3: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==384981== by 0x149CF1: allocate (tal.c:250)
==384981== by 0x14A3C6: tal_alloc_ (tal.c:428)
==384981== by 0x1114F2: try_connect_peer (connectd.c:1526)
==384981== by 0x111717: connect_to_peer (connectd.c:1558)
==384981== by 0x1124F5: recv_req (connectd.c:1627)
==384981== by 0x1188B2: handle_read (daemon_conn.c:31)
==384981== by 0x13FBCB: next_plan (io.c:59)
==384981== by 0x140076: do_plan (io.c:407)
==384981== by 0x140113: io_ready (io.c:417)
==384981== by 0x141A57: io_loop (poll.c:445)
==384981== by 0x112CB0: main (connectd.c:1703)
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Occasional crash in connectd due to use-after-free
Fixes: #4343
This is stolen from the bitcoind source, so we use their style
(no tabs, 4-wide spaces). Clean it up and add the emacs magic to
maintain it in future.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As reported by Wladimir J. van der Laan. Valgrind will complain
about padding and unset fields, so memset the structs.
```
==42653== Syscall param socketcall.connect(serv_addr..sa_len) points to uninitialised byte(s)
==42653== at 0x4C7D19A: _connect (in /lib/libc.so.7)
==42653== by 0x4EE1F35: ??? (in /lib/libthr.so.3)
==42653== by 0x249D57: get_local_sockname (netaddress.c:212)
==42653== by 0x249CDB: guess_address (netaddress.c:242)
==42653== by 0x2473D0: public_address (connectd.c:1003)
==42653== by 0x246CE4: setup_listeners (connectd.c:0)
==42653== by 0x246566: connect_init (connectd.c:1311)
==42653== by 0x270CEB: next_plan (io.c:59)
==42653== by 0x2713EE: io_ready (io.c:417)
==42653== by 0x2726B1: io_loop (poll.c:445)
==42653== by 0x24618A: main (connectd.c:1703)
==42653== Address 0x7fc000690 is on thread 1's stack
==42653== in frame #3, created by guess_address (netaddress.c:231)
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is vital for calculating merkle trees; I previously used
towire+fromwire to get this!
Requires generation change so we can magic the ARRAY_SIZE var (the C
pre-processor can't uppercase things).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Avoids much cut & paste. Some tests don't need any of it, but most
want at least some of this infrastructure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we're already attempting to connect to a peer, we would ignore
new connection requests. This is problematic if your node has bad
connection details for the node -- you can't update it while inflight.
This patch appends new connection suggestions to the list of connections
to try.
Fixes#4154
There's a few structs/wire calls that only exist under experimental features.
These were in a common file that was shared/used a bunch of places but
this causes problems. Here we move one of the problematic methods back
into `openingd`, as it's only used locally and then isolate the
references to the `witness_stack` in a new `common/psbt_internal` file.
This lets us remove the iff EXP_FEATURES inclusion switches in most of
the Makefiles.
1. Rename memleak_enter_allocations to memleak_find_allocations.
2. Unify scanning for pointers into memleak_remove_region / memleak_remove_pointer.
3. Document the functions.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is simple, and we now can multifundchannel to every node on testnet
(one simply hangs once we connect).
Changelog-Fixed: Protocol: We now hang up if peer doesn't respond to init message after 60 seconds.
And add secp_recovery to headers, while we're at it.
```
./wire/wire.h:7:10: fatal error: secp256k1_recovery.h: No such file or directory
#include <secp256k1_recovery.h>
^~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Makefile:254: recipe for target 'connectd/test/run-initiator-success.o' failed
make: *** [connectd/test/run-initiator-success.o] Error 1
m
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
dual funding needs the max-witness-len and utxo fields set for every
input. we should add them when we create a 'fundpsbt', so that every
psbt that c-lightning generates is dual-funding ready
There's a lot of it, and it means we can't `make check-source` on
these files.
Also bring bolt quotes up-to-date.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids overwriting the ones in git, and generally makes things neater.
We have convenience headers wire/peer_wire.h and wire/onion_wire.h to
avoid most #ifdefs: simply include those.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to make experimental versions of these completely separate files.
Also remove the dependency on the Makefile itself: it simply causes
unnecessary churn. We can always force-rebuild when we change a rule.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We create ALL_PROGRAMS, ALL_TEST_PROGRAMS, ALL_C_SOURCES and
ALL_C_HEADERS. Then the toplevel Makefile knows which are
autogenerated (by wildcard), so it can have all the rules to clean
them or check the source as necessary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that other directories were explicitly depending on the generated
file, instead of relying on their (already existing) dependency on
$(LIGHTNINGD_HSM_CLIENT_OBJS), so we remove that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This simplifies our test matrix, as we never have to handle talking
to peers that specify one but not the other.
This is particularly important for option_anchor_outputs which
assumes option_static_remotekey.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't preserve detailed asset information at the moment, so provide a
way to convert from a sat to an amount_asset struct.
We also need a way to convert from an 'amount_asset' to a 'value' for
elements, which for explicit (i.e. non-blinded) asssets is a 0x01 prefix
plus the big-endian encoded value.
@thestick613 noticed that since tor version below 0.3.2.2-alpha
will not support V3 ed25519 address formats, the error handling
is not that helpful in the error message from cli.
So now we add an hint.
Changelog-None:
Signed-off-by: Saibato <saibato.naga@pm.me>
connectd/connectd.h; Add helper function to update conn error list
Signed-off-by: Saibato <saibato.naga@pm.me>
Our existing coin_moves tracking logic assumed that any tx we had an
input in belonged to *all* of our wallet (not a bad assumption as long
as there was no way to update a tx that spends our wallets)
Now that we've got `signpsbt` implemented, however, we need to be
careful about how we account for withdrawals. For now we do a best guess
at what the feerate is, and lump all of our spent outputs as a
'withdrawal' when it's impossible to disambiguate
It returns NULL, so you can simply `return fromwire_fail(...)`
if you want to return NULL in this case. Use that more.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we now over-write the wally malloc/free functions, we need to do
so for tests as well. Here we pull up all of the common setup/teardown
logic into a separate place, and update the tests that use libwally to
use the new common_setup core
Changelog-None
Rusty Russell
niftynei
Matt Whitlock
Saibato