There is very little that is plugin specific in the jsonrpc_request so
this just extracts the common parts so we can reuse them outside of
the plugin compilation unit as well.
Obviously the Facebook relationship status joke was a bit subtle, but I've
continued it anyway because I'm especially susceptible to Dad jokes.
Suggested-by: @niftynei
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This causes a compiler warning if we don't do something with the
result (hopefully return immediately!).
We use was_pending() to ignore the result in the case where we
complete a command in a callback (thus really do want to ignore
the result).
This actually fixes one bug: we didn't return after command_fail
in json_getroute with a bad seed value.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Usually, this means they return 'command_param_failed()' if param()
fails, and changing 'command_success(); return;' to 'return
command_success()'.
Occasionally, it's more complex: there's a command_its_complicated()
for the case where we can't exactly determine what the status is,
but it should be considered a last resort.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These routines free the 'struct command': a common coding error is not
to return immediately.
To catch this, we make them return a non-NULL 'struct command_result
*', and we're going to make the command handlers return the same (to
encourage 'return command_fail(...)'-style usage).
We also provide two sources for external use:
1. command_param_failed() when param() fails.
2. command_its_complicated() for some complex cases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
json_escaped.[ch], param.[ch] and jsonrpc_errors.h move from lightningd/
to common/. Tests moved too.
We add a new 'common/json_tok.[ch]' for the common parameter parsing
routines which a plugin might want, taking them out of
lightningd/json.c (which now only contains the lightningd-specific
ones).
The rest is mainly fixing up includes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I want to use param functions in plugins, and they don't have struct
command.
I had to use a special arg to param() for check to flag it as allowing
extra parameters, rather than adding a one-use accessor.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This (will) avoid the plugin having to walk back from the params object
as it currently does.
No code changes; I removed UNUSED and UNNEEDED labels from the other
parameters though (as *every* json_rpc callback needs to call param()
these days, they're *always* used).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The check command allows us to check the parameters of a command
without running it. Example:
lightning-cli check invoice 234 foo desc
We do this by removing the "command_to_check" parameter and then using the
remaining parameters as-is.
I chose the parameter name "command_to_check" instead of just "command" because
it must be unique to all other parameter names for all other commands. Why?
Because it may be ambiguous in the case of a json object, where the parameters are
not necessary ordered. We don't know which one is the command to check and
which one is a parameter.
Signed-off-by: Mark Beckwith <wythe@intrig.com>
We can now set a flag to have param() ignore unexpected parameters.
Normally unexpected parameters are considered errors.
Needed by the check command.
Signed-off-by: Mark Beckwith <wythe@intrig.com>
This is needed in order to be able to add methods while initializing
the plugins, but before actually moving to the config dir and starting
to listen.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We now keep multiple commands for a json_connection, and an array of
json_streams.
When a command wants to write something, we allocate a new json_stream
at the end of the array.
We always output from the first available json_stream; once that
command has finished, we free that and move to the next. Once all are
done, we wake the reader.
This means we won't read a new command if output is still pending, but
as most commands don't start writing until they're ready to write
everything, we still get command parallelism.
In particular, you can now 'waitinvoice' and 'delinvoice' and it will
work even though the 'waitinvoice' blocks.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
json_stream_success / json_stream_fail belong in jsonrpc.c, and the
json_tok helpers for special types belong in json.x
json_add_object() isn't used, remove it rather than moving it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We promote 'struct json_stream' to contain the membuf; we only attach
the json_stream to the command when we actually call
json_stream_success / json_stream_fail.
This means we are closer to 'struct json_stream' being an independent
layer; the tests are already modified to use it directly to create
JSON.
This is also the first step toward re-enabling non-serial command
execution.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
My test case is a mainnet gossip store with 22107 channels, and
time to do `lightning-cli listchannels`:
Before: `lightning-cli listchannels` DEVELOPER=0
real 0m1.303000-1.324000(1.3114+/-0.0091)s
After:
real 0m0.629000-0.695000(0.64985+/-0.019)s
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Such an API is required for when we stream it directly. Almost all our
handlers fit this pattern already, or nearly do.
We remove new_json_result() in favor of explicit json_stream_success()
and json_stream_fail(), but still allowing command_fail() if you just
want a simple all-in-one fail wrapper.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This isn't a big change, since we basically dump the entire JSON
resuly string into the membuf then write it out, but it's prep for the
next changes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's a DoS if we keep reading commands and don't insist the client
read the responses.
My initial implementation simply removed the io_duplex, but that
doesn't work if we want to inject notifications in the stream (as we
will eventually want to do), so we operate it as duplex but have each
side wake the other when it's done.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a bit of overkill now that we simply accumulate the entire
JSON response in the buffer before flushing, but when we move to
streamed responses it allows us to have a single command that has
exclusive access to the out direction of the JSON-RPC connection.
We split json_invoice(), as it now needs to round-trip to the gossipd,
and uniqueness checks need to happen *after* gossipd replies to avoid
a race.
For every candidate channel gossipd gives us, we check that it's in
state NORMAL (not shutting down, not still waiting for lockin), that
it's connected, and that it has capacity. We then choose one with
probability weighted by excess capacity, so larger channels are more
likely.
As a side effect of this, we can tell if an invoice is unpayble (no
channels have sufficient incoming capacity) or difficuly (no *online*
channels have sufficient capacity), so we add those warnings.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Callers to param() can now optionally set a flag to see if command_fail was
called.
This is necessary because the `cmd` is freed in case of failure.
I spent a bit of time trying to extend the lifetime of the `cmd` to the end
of parse_request(), but the destructors still needed to be called when they
were, and it was getting ugly. So I took this minimal approach.
Signed-off-by: Mark Beckwith <wythe@intrig.com>
Added the concept of a "command mode". The
behavior of param() changes based on the mode.
Added and tested the command mode of CMD_USAGE for
setting the usage of a command without running it.
Only infrastructure and test. No functional changes.
Signed-off-by: Mark Beckwith <wythe@intrig.com>
The easiest way to do this is to play with the 'wallet_tx' semantics
and have 'amount' have meaning even when 'all_funds' is set.
Note that we change the string 'Cannot afford funding transaction' to
'Cannot afford transaction' as this code is also used for withdrawls.
Inspired-by: molz on #c-lightning
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Just log the failed ones, not every connection and successful commands.
Before (VALGRIND=0 -n10):
111 passed, 1 skipped in 175.78 seconds
After:
111 passed, 1 skipped in 173.92 seconds
111 passed, 1 skipped in 164.16 seconds
111 passed, 1 skipped in 171.30 seconds
111 passed, 1 skipped in 180.05 seconds
111 passed, 1 skipped in 180.04 seconds
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Removed `json_get_params`.
Also added json_tok_percent and json_tok_newaddr. Probably should
have been a separate PR but it was so easy.
[ Squashed comment update for gcc workaround --RR ]
Signed-off-by: Mark Beckwith <wythe@intrig.com>
Until now, `command_fail()` reported an error code of -1 for all uses.
This PR adds an `int code` parameter to `command_fail()`, requiring the
caller to explicitly include the error code.
This is part of #1464.
The majority of the calls are used during parameter validation and
their error code is now JSONRPC2_INVALID_PARAMS.
The rest of the calls report an error code of LIGHTNINGD, which I defined to
-1 in `jsonrpc_errors.h`. The intention here is that as we improve our error
reporting, all occurenaces of LIGHTNINGD will go away and we can eventually
remove it.
I also converted calls to `command_fail_detailed()` that took a `NULL` `data`
parameter to use the new `command_fail()`.
The only difference from an end user perspecive is that bad input errors that
used to be -1 will now be -32602 (JSONRPC2_INVALID_PARAMS).
No new functionality, just a continuation of my work toward completing #665.
I removed the common members of `struct withdrawal` and `struct fund_channel`
and placed them in a new `struct wallet_tx`. Then it was fairly straightforward
to reimplement the existing code in terms of `wallet_tx`.
Since I made some structural changes I wanted to get this approved before I
go any farther.
Added 'all' to fundchannel help message.
* Modifies invoice command to have the following format
invoice <msatoshi> <label> <desc> <?expiry> <?fallbackaddr>
* Adds support for Segwit bcrt1 addresses for withdraw
* Add test case for fallback address in invoice creation
* Create a common json_tok_address_scriptpubkey to be used
by invoice and withdraw commands.
We now keep a list of commands for the jcon instead of a simple
'current' pointer: the assertions become a bit more complex, but
the rest is fairly mechanical.
Fixes: #1007
Reported-by: @ZmnSCPxj
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We move it into jsonrpc where it belongs, and make it fail the command.
This means it can tell us exactly what was wrong.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This can be used for upgrades to make sure you're not using deprecated
options, JSON commands, JSON fields, etc.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's just a sha256_double, but importantly when we convert it to a
string (in type_to_string, which is used in logging) we use
bitcoin_txid_to_hex() so it's reversed as people expect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I prefer the typesafety of specific functions, rather than having the
caller know that txids are traditionally reversed in bitcoin.
And we already have a bitcoin_txid_to_hex() function for this.
Closes: #411
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
jsonrpc handlers usually directly call command_success or
command_fail; not doing that implies they're waiting for something
async.
Put an explicit call (currently a noop) there, and add debugging
checks to make sure it's used.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In future it will have TOR support, so the name will be awkward.
We collect the to/fromwire functions in common/wireaddr.c, and the
parsing functions in lightningd/netaddress.c.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christian Decker
Rusty Russell
Mark Beckwith
Mark Beckwith
ZmnSCPxj
John Barboza
practicalswift