The left join should make sure we still get the results but
referencing the fields and/or attempting to write them to the JSON-RPC
result will cause unforeseen problems. So just omit if we forgot
something.
Noted by @cdecker, the term 'local' is grossly overused, and the hout
preimage is basically only used as a sanity check (though I've just put
a FIXME there for now).
Also eliminated spurious blank line which crept into wallet.c.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
failoutchannel tells us which channel to send an update for (specifically
for temporary_channel_failure); but we don't save it into the db. It's
not even clear we should, since it's a corner case and the channel might
not even exist when we come back.
So on db restore, change such errors to WIRE_TEMPORARY_NODE_FAILURE
which doesn't need an update.
We also don't memset it to 0 in the normal case (we only access if it
failcode has the UPDATE bit set) so valgrind will trigger if we're
wrong.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't save them to the database, so fix things up as we load them.
Next patch will actually save them into the db, and this will become
COMPAT code.
Also: call htlc_in_check() with NULL on db load, as otherwise it aborts
internally.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do this a lot, and had boutique helpers in various places. So add
a more generic one; for convenience it returns a pointer to the new
end element.
I prefer the name tal_arr_expand to tal_arr_append, since it's up to
the caller to populate the new array entry.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's no reason for the db to ever return non-NULL if it's spent. And there's
only one caller, for which that is definitely true.
Suggested-by: @cdeckerFixes: #1934
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's an array: we were only saving the single element; if there was more than
one changed HTLC we'd get a bad signature!
The report in #1907 is probably caused by the other side re-requesting
something we considered already finalized; to avoid this particular error,
we should set the field to NULL if there's no last_sent_commit.
I'm increasingly of the opinion we want to just save all the update
packets to the db and blast them out, instead of doing this
second-guessing dance.
Fixes: #1907
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we don't try to unilaterally close after a restart, *and*
we can tell onchaind to try to use the point to recover funds when the
peer unilaterally closes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that we don't actually need the output number: it's the tx itself
which is confirmed. And the next caller doesn't have it convenient, so
eliminate it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are not confirmed by the normal methods (wallet_can_spend is false!),
so we'll deal with them manually.
We use UTXO_FIELDS in wallet_add_utxo, too, for consistency.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
tal_count() is used where there's a type, even if it's char or u8, and
tal_bytelen() is going to replace tal_len() for clarity: it's only needed
where a pointer is void.
We shim tal_bytelen() for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This seems like a premature optimization: it tried to cut down the number of
allocations by reusing the same `struct invoice_details` while iterating through
a number of results. But this sidesteps the checks by `valgrind` and we'd miss a
missing field that was set by the previous iteration.
Reported-by: @rustyrussell
Signed-off-by: Christian Decker <@cdecker>
`wallet_stmt2payment` always expects the same fields in the same order, so we
should make sure that we always fetch them in that order and all of them.
Well, it's generated by shachain, so technically it is a sha256, but
that's an internal detail. It's a secret.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
structeq() is too dangerous: if a structure has padding, it can fail
silently.
The new ccan/structeq instead provides a macro to define foo_eq(),
which does the right thing in case of padding (which none of our
structures currently have anyway).
Upgrade ccan, and use it everywhere. Except run-peer-wire.c, which
is only testing code and can use raw memcmp(): valgrind will tell us
if padding exists.
Interestingly, we still declared short_channel_id_eq, even though
we didn't define it any more!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tor wasn't actually working for me to connect to anything, but it worked
for 'ssh -D' testing.
Note that the resulting 'netaddr' is a bit weird, but I guess it's honest.
$ ./cli/lightning-cli connect 021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b
{
"id": "021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b"
}
$ ./cli/lightning-cli listpeers
{
"peers": [
{
"state": "GOSSIPING",
"id": "021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b",
"netaddr": [
"ln1qg0je0lugpzu5ttsv78vlrkhteyg9yy8fjw68qr57mfhsfyrxurzkq522ah.lseed.bitcoinstats.com:9735"
],
"connected": true,
"owner": "lightning_gossipd"
}
]
}
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Risks leakage. We could do lookup via the proxy, but that's a TODO.
There's only one occurance of getaddrinfo (and no gethostbyname), so
we add a flag to the callers.
Note: the use of --always-use-proxy suppresses *all* DNS lookups, even
those from connect commands and the command line.
FIXME: An implicit setting of use_proxy_always is done in gossipd if it
determines that we are announcing nothing but Tor addresses, but that
does *not* suppress 'connect'.
This is fixed in a later patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Add special option where an empty host means 'wildcard for IPv4 and/or IPv6'
which means ':1234' can be used to set only the portnum.
2. Only add this protocol wildcard if --autolisten=1 (default)
and no other addresses specified.
3. Pass it down to gossipd, so it can handle errors correctly: in most cases,
it's fatal not to be able to bind to a port, but for this case, it's OK
if we can only bind to one of IPv4/v6 (fatal iff neither).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This replacement is a little menial, but it explicitly catches all
the places where we allow a local socket. The actual implementation of
opening a AF_UNIX socket is almost hidden in the patch.
The detection of "valid address" is now more complex:
p->addr.itype != ADDR_INTERNAL_WIREADDR || p->addr.u.wireaddr.type != ADDR_TYPE_PADDING
But most places we do this, we should audit: I'm pretty sure we can't
get an invalid address any more from gossipd (they may be in db, but
we should fix that too).
Closes: #1323
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I would have liked to make it a tal object, then we'd catch most
things with our memleak detection. However, sqlite3 doesn't seem to
allow allocator overrides.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the cause of 'sqlite3_close: unable to close due to unfinalized statements or unfinished backups' with the --daemon option.
Fixes: #1420
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently we intuit it from the fd being closed, but that may happen out
of order with when the master thinks it's dead.
So now if the gossip fd closes we just ignore it, and we'll get a
notification from the master when the peer is disconnected.
The notification is slightly ugly in that we have to disable it for
a channel when we manually hand the channel back to gossipd.
Note: as stands, this is racy with reconnects. See the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Simplification of the offset calculation to use the rescan parameter, and rename
of `wallet_first_blocknum`. We now use either relative rescan from our last
known location, or absolute if a negative rescan was given. It's all handled in
a single location (except the case in which the blockcount is below our
precomputed offset), so this should reduce surprises.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is a big simplification, we just report the DBs current blockchain height
as the point to continue scanning, or the passed in default. No more guessing
where to continue from or whether the wallet was used and when it first saw the
light of day.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Christian Decker
Rusty Russell
practicalswift
William Casarin
Jan Sarenik
ZmnSCPxj