We're going to use the hsm for a migration, so we need to set up the HSM
before we get to the wallet migration code.
All that this requires is removing the places in HSM init that we touch
the database struct -- easy enough to accomplish by passing the required
field back out from init, and then associating it onto the wallet after
it's been initialized.
On node start we replay onchaind's transactions from the database/from
our loaded htlc table. To keep things tidy, we shouldn't notify the
ledger about these, so we wrap pretty much everything in a flag that
tells us whether or not this is a replay.
There's a very small corner case where dust transactions will get missed
if the node crashes after the htlc has been added to the database but
before we've successfully notified onchaind about it.
Notably, most of the obtrusive updates to onchaind wrappings are due to
the fact that we record dust (ignored outputs) before we receive
confirmation of its confirmation.
This will allow the dynamic starting code to use them too.
Also lets us move dev_debug_subprocess under #if DEVELOPER.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we know whether the command completed or not, we can correctly
call command_still_pending() if it didn't complete.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I noticed the following in logs for tests/test_connection.py::test_feerate_stress:
```
DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Failing HTLC 18446744073709551615 due to peer death
DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: local_routing_failure: 8194 (WIRE_TEMPORARY_NODE_FAILURE)
```
This is because it reports the (transient) node_failure error, because
our channel_failure message is incomplete. Fix this wart up.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously we've used the term 'funder' to refer to the peer
paying the fees for a transaction; v2 of openchannel will make
this no longer true. Instead we rename this to 'opener', or the
peer sending the 'open_channel' message, since this will be universally
true in a dual-funding world.
We use the new function `plugins_free` to define the correct deallocation
order on shutdown, since under normal operation the allocation tree is
organized to allow plugins to terminate and automatically free all dependent
resources. During shutdown the deallocation order is under-defined since
siblings may get freed in any order, but we implicitly rely on them staying
around.
One is called on every plugin return, and tells us whether to continue;
the other is only called if every plugin says ok.
This works for things like payload replacement, where we need to process
the results from each plugin, not just the final one!
We should probably turn everything into a chained callback next
release.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They callback must take ownership of the payload (almost all do, but
now it's explicit).
And since the payload and cb_arg arguments to plugin_hook_call_() are
always identical, make them a single parameter.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that it's channeld which calculates the shared secret, too. This
minimizes the work that lightningd has to do, at cost of passing this
through.
We also don't yet save the blinding field(s) to the database.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Use `LC_ALL=C sort` instead of `sort` so that mocks get sorted in
the same way on all developers' environments.
Re-record the result of `make update-mocks`.
Changelog-None
common/onion is going to need to use this for the case where it finds a blinding
seed inside the TLV. But how it does ecdh is daemon-specific.
We already had this problem for devtools/gossipwith, which supplied a
special hsm_do_ecdh(). This just makes it more general.
So we create a generic ecdh() interface, with a specific implementation
which subdaemons and lightningd can use.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is useful in general, but in particular it allows fundchannel to avoid YA
query to figure out if it can wumbo.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON: `connect` returns `features` of the connected peer on success.
Turns out that unnecessary: all callers can access the feature_set,
so make it much more like a normal primitive.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Unfortunately the invoice_payment_hook can give us a failcode, so I simply
restrict it to the two sensible ones.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-deprecated: plugins: invoice_payment_hook "failure_code" only handles simple cases now, use "failure_message".
Now that we have json_stream in common/, we can move all the related
helpers from lightningd/json to common/json. This way everyone can
benefit of them (including libplugin, the plugins themselves,
potentially lightning-cli), not lightningd alone!
Note that the Makefile of the common/test/ had to be modified, because
the new helpers make use of common/wireaddr... Which turns out to
\#include <lightingd/lightningd.h> ! So we couldnt just include the .c
and add mocks if we redefined some structs (hello run-param).
Changelog-Added: lightningd: Added --subdaemon command to allow alternate subdaemons.
[ Wow, that was mammoth; 44 comments over 12 commits. Feels almost unfair to squash it into one commit, so I wanted to note @ksedgwic's perseverence here! --RR ]
Before this patch we used `int` for error codes. The problem with
`int` is that we try to pass it to/from wire and the size of `int` is
not defined by the standard. So a sender with 4-byte `int` would write
4 bytes to the wire and a receiver with 2-byte `int` (for example) would
read just 2 bytes from the wire.
To resolve this:
* Introduce an error code type with a known size:
`typedef s32 errcode_t`.
* Change all error code macros to constants of type `errcode_t`.
Constants also play better with gdb - it would visualize the name of
the constant instead of the numeric value.
* Change all functions that take error codes to take the new type
`errcode_t` instead of `int`.
* Introduce towire / fromwire functions to send / receive the newly added
type `errcode_t` and use it instead of `towire_int()`.
In addition:
* Remove the now unneeded `towire_int()`.
* Replace a hardcoded error code `-2` with a new constant
`INVOICE_EXPIRED_DURING_WAIT` (903).
Changelog-Changed: The waitinvoice command would now return error code 903 to designate that the invoice expired during wait, instead of the previous -2
This command injects a custom message into the encrypted transport stream to
the peer, allowing users to build custom protocols on top of c-lightning
without requiring any changes to c-lightning itself.
This is needed to fully implement handling of blockheight disagreements
between us and payee.
If payee believes the blockheight is higher than ours, then `pay`
should wait for our node to achieve that blockheight.
Changelog-Add: Implement `waitblockheight` to wait for a specific blockheight.
This lets us do more flexible filtering in the next patch. But it also
keeps some weird logic out of gossipd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the final step: we pass the complete fee_states to and from
channeld.
Changelog-Fixed: "Bad commitment signature" closing channels when we sent back-to-back update_fee messages across multiple reconnects.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The invoice_try_pay code now takes a set, rather than a single htlc, but
it's basically the same thing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a transient field, so rework things so we don't leave it in
struct htlc_out. Instead, load htlc_in first and connect htlc_out to
them as we go.
This also changes one place where we use it instead of the am_origin
flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't set the secret to compulsory (yet!) but put code in for the
future. Meanwhile, if there is a secret, check it is correct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In a future version, we will use features to insist that payers
provide the secret. In transition, we may have old invoices which
didn't insist on that, so we need to know this on a per-invoice basis.
Not sure if I got the right syntax for adding an empty blob though!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
lightning-cli is going to need to know what network we're on, so
it will need to parse the config files. Move the code which does
the initial bootstrap parsing into common, as well as the config
file parsing core.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The tal overhead of 5 pointers, the linked list node is 2; and we also
tal'd the string. That's 96 bytes per entry.
Use a simple array instead, though it means more work on deletion
since each log_entry is no longer a tal object.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This simplifies our tests, too, since we don't need a magic option to
enable io logging in subdaemons.
Note that test_bad_onion still takes too long, due to a separate minor
bug, so that's marked and left dev-only for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
niftynei
rbndg
Christian Decker
Vasil Dimov
darosior
Ken Sedgwick
ZmnSCPxj
fiatjaf