A new string field is added to the command structure and is specified at the creation of each native command, and in the JSON created by 'json_add_help_command()'.
We now have a test blockchain for MCP which has the correct channels,
so this is not needed.
Also fix a benchmark script bug where 'mv "$DIR"/log
"$DIR"/log.old.$$' would fail if you log didn't exist from a previous run.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The old value of 1000 sat was too small to cover the dust reserves.
This lead to the situation when trying to open a channel with minimal
amount, the channels got refused because they were not able cover the
commitment fees.
For this reason the minimal capacity should be increased to i.e. 10k
satoshi, as the technical minimum that also accounts for fees and
reserves is somewhere around 6k sat.
I tried to just do gossipd, but it was uncontainable, so this ended up being
a complete sweep.
We didn't get much space saving in gossipd, even though we should save
24 bytes per node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pubkeys are not not actually DER encoding, but Pieter Wuille corrected
me: it's SEC 1 documented encoding.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
38922-39297(39180.6+/-1.3e+02),2880728,41.040000-41.160000(41.106+/-0.05),2.270000-2.530000(2.338+/-0.097),44.570000-53.980000(49.696+/-3),32.840000-33.080000(32.95+/-0.095),43.060000-44.950000(43.696+/-0.72)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
- add config value min_capacity_sat that will replaces the magic value
min_effective_htlc_capacity = AMOUNT_MSAT(1000000)
- add config switch min_capacity_sat
This lets us benchmark without a valid blockchain.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'fixup!_gossipd__dev_option_to_allow_unknown_channels.patch':
fixup! gossipd: dev option to allow unknown channels.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This patch will properly set fee_per_satoshi to _unsigned_ integer,
as support for negative fees was removed from overall design.
This change does not break any tests, so I assume its
better this way.
Christian and I both unwittingly used it in form:
*tal_arr_expand(&x) = tal(x, ...)
Since '=' isn't a sequence point, the compiler can (and does!) cache
the value of x, handing it to tal *after* tal_arr_expand() moves it
due to tal_resize().
The new version is somewhat less convenient to use, but doesn't have
this problem, since the assignment is always evaluated after the
resize.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we are planning to release a bug fix release, and the plugin
subsystem is not yet complete, it is better to make plugin support
opt-in while we continue testing.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Usually, this means they return 'command_param_failed()' if param()
fails, and changing 'command_success(); return;' to 'return
command_success()'.
Occasionally, it's more complex: there's a command_its_complicated()
for the case where we can't exactly determine what the status is,
but it should be considered a last resort.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Handers of a specific form are both designed to be used as callbacks
for param(), and also dispose of the command if something goes wrong.
Make them return the 'struct command_result *' from command_failed(),
or NULL.
Renaming them just makes sense: json_tok_XXX is used for non-command-freeing
parsers too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are only supposed to be used when you want the token contents including
surrounding "". We should use this when reporting errors, but usually
we just want to access the tok members directly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
json_escaped.[ch], param.[ch] and jsonrpc_errors.h move from lightningd/
to common/. Tests moved too.
We add a new 'common/json_tok.[ch]' for the common parameter parsing
routines which a plugin might want, taking them out of
lightningd/json.c (which now only contains the lightningd-specific
ones).
The rest is mainly fixing up includes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This (will) avoid the plugin having to walk back from the params object
as it currently does.
No code changes; I removed UNUSED and UNNEEDED labels from the other
parameters though (as *every* json_rpc callback needs to call param()
these days, they're *always* used).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This currently just invokes GDB, but we could generalize it (though
pdb doesn't allow attaching to a running process, other python
debuggers seem to).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We also make `--help` a non-early arg so it allows for the plugins to
register their options before printing the help message. The options
themselves are stored in a separate struct inbetween them being
registered and them being forwarded to the plugin. Currently only
supports string options.
Signed-off-by: Christian Decker <@cdecker>
The idea is that `plugin` is an early arg that is parsed (from command
line or the config file). We can then start the plugins and have them
tell us about the options they'd like to add to the mix, before we
actually parse them.
Signed-off-by: Christian Decker <@cdecker>
Such an API is required for when we stream it directly. Almost all our
handlers fit this pattern already, or nearly do.
We remove new_json_result() in favor of explicit json_stream_success()
and json_stream_fail(), but still allowing command_fail() if you just
want a simple all-in-one fail wrapper.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's the only user of them, and it's going to get optimized.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
gossip.pydiff --git a/common/test/run-json.c b/common/test/run-json.c
index 956fdda35..db52d6b01 100644
We initialize it to 30 seconds, but it's *always* overridden by the
gossip_init message (and usually to 60 seconds, so it's doubly
misleading).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Right now, the `config` file is read *after* the configuration working directory is moved to in the software. However one configuration option `lightning-dir` settable in the `config` file sets this working directory. As the directory is already opened (which defaults to `$HOME/.lightning`) before the configuration is read, the configured directory will not be used.
This patch parses the configuration file before opening the working directory, fixing this bug.
[ Update CHANGELOG.md and man pages -- RR ]
We do this a lot, and had boutique helpers in various places. So add
a more generic one; for convenience it returns a pointer to the new
end element.
I prefer the name tal_arr_expand to tal_arr_append, since it's up to
the caller to populate the new array entry.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And no more filtering out messages, as we should no longer spam the
logs with them (the 'Connected json input' one was removed some time
ago).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Manipulate fees via fake-bitcoin-cli. It's not quite the same, as
these are pre-smoothing, so we need a restart to override that where
we really need an exact change. Or we can wait until it reaches a
certain value in cases we don't care about exact amounts.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was a very simple change and allowed us to remove the special
`json_opt_tok` macro.
Moved the callback out of `common/json.c` to `lightningd/json.c` because the new
callbacks are dependent on `struct command` etc.
(I already started on `json_tok_number`)
My plan is to:
1. upgrade json_tok_X one a time, maybe a PR for each one.
2. When done, rename macros (i.e, remove "_tal").
3. Remove all vestiges of the old callbacks
4. Add new callbacks so that we no longer need json_tok_tok!
(e.g., json_tok_label, json_tok_str, json_tok_msat)
Signed-off-by: Mark Beckwith <wythe@intrig.com>
This gives the network options a chance to load from arguments before usage
exits, so that the proper defaults are shown.
This didn't work:
lightningd --mainnet --help
before it showed testnet defaults, now it shows mainnet defaults.
Signed-off-by: William Casarin <jb55@jb55.com>
In several places we use low-level tal functions because we want the
label to be something other than the default. ccan/tal is adding
tal_*_label so replace them and shim it for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
tal_count() is used where there's a type, even if it's char or u8, and
tal_bytelen() is going to replace tal_len() for clarity: it's only needed
where a pointer is void.
We shim tal_bytelen() for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Removed `json_get_params`.
Also added json_tok_percent and json_tok_newaddr. Probably should
have been a separate PR but it was so easy.
[ Squashed comment update for gcc workaround --RR ]
Signed-off-by: Mark Beckwith <wythe@intrig.com>
darosior
Rusty Russell
Michael Schmoock
Richard Bondi
Christian Decker
arowser
trueserve
Mark Beckwith
Simon Vrouwe
William Casarin
Mark Beckwith