if there are any comments that aren't "attached" to a message,
print them at the top of the generated file. we need this for
the fancy auto-gen'd dependencies in the tool-wiregen tests.
The new TLV spec uses BigSize, like Bitcoin's CompactInt but
*little-endian*. So change our name for clarity, and insist that
decoding be minimal as the spec requires.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
the RFC's extract-format.py is switching to a new format.
this script can correctly parse them.
mostly moves logic over from generate-wire.py, uses a
Python formatting libarary called mako, which needs to be
installed prior to running this script.
you can add it to your system with
sudo apt-get install python3-mako
Encapsulating the peer state was a win for lightningd; not surprisingly,
it's even more of a win for the other daemons, especially as we want
to add a little gossip information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now have a test blockchain for MCP which has the correct channels,
so this is not needed.
Also fix a benchmark script bug where 'mv "$DIR"/log
"$DIR"/log.old.$$' would fail if you log didn't exist from a previous run.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Save some overhead, plus gets us ready for giving subdaemons direct
store access. This is the first time we *upgrade* the gossip_store,
rather than just discarding.
The downside is that we need to add an extra message after each
channel_announcement, containing the channel capacity.
After:
store_load_msec:28337-30288(28975+/-7.4e+02)
vsz_kb:582304-582316(582306+/-4.8)
store_rewrite_sec:11.240000-11.800000(11.55+/-0.21)
listnodes_sec:1.800000-1.880000(1.84+/-0.028)
listchannels_sec:22.690000-26.260000(23.878+/-1.3)
routing_sec:2.280000-9.570000(6.842+/-2.8)
peer_write_all_sec:48.160000-51.480000(49.608+/-1.1)
Differences:
-vsz_kb:582320
+vsz_kb:582316
-listnodes_sec:2.100000-2.170000(2.118+/-0.026)
+listnodes_sec:1.800000-1.880000(1.84+/-0.028)
-peer_write_all_sec:51.600000-52.550000(52.188+/-0.34)
+peer_write_all_sec:48.160000-51.480000(49.608+/-1.1)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* remove libbase58, use base58 from libwally
This removes libbase58 and uses libwally instead.
It allocates and then frees some memory, we may want to
add a function in wally that doesn't or override
wally_operations to use tal.
Signed-off-by: Lawrence Nahum lawrence@greenaddress.it
Some tests require dev support, but the rest can run. We simplify
the gossip_store output so it's the same in non-dev mode too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It can take a while if bitcoind has the regtest chain, and grossly
distorts our benchmarks!
Reported-by: Joe Netti <jnetti@blockstream.io>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
added sanity check to make sure scid of csv is the same as scid in gossip.
Revised style, mem allocation, and error checks
[ Minor fixups, and updated benchmark script -- RR ]
With data.tar.gz: 456609740 Apr 2 12:33
store_load_msec:35300-42354(37118.2+/-2.7e+03)
vsz_kb:582832
store_rewrite_sec:12.700000-13.430000(12.988+/-0.27)
listnodes_sec:3.000000-3.160000(3.076+/-0.057)
listchannels_sec:30.790000-31.690000(31.03+/-0.34)
routing_sec:0.00
peer_write_all_sec:63.640000-67.860000(66.294+/-1.4)
Channels have a htlc_minimum_msat of 10000, which is why we didn't
find routes.
This makes a significant speed drop:
-routing_sec:26.940000-27.990000(27.616+/-0.39)
+routing_sec:60.70
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
now we print the subtypes out when you call printwire
note that we have to reverse the order the subtypes appear in
because
1) they're static and,
2) a few of them are nested
the original version of the subtype generator emitted '$'
to designate that a field was a subtype; now it's got a different
format:
funding_type,8,num_inputs,2
funding_type,10,input_info,num_inputs*input_info
this patch updates our generator to understand this new format
This is needed so that some csv's can expose their subtype parsing
functions in their header. This gets used in a later PR where
we start replacing manually created 'subtype' definitions with
generated ones.
This doesn't result in a speedup for our benchmark, since we use the
cli tool which does the formatting.
MCP results from 5 runs, min-max(mean +/- stddev):
store_load_msec:33422-36830(35196.2+/-1.2e+03)
vsz_kb:2637488
store_rewrite_sec:36.030000-37.630000(36.794+/-0.52)
listnodes_sec:0.720000-0.950000(0.86+/-0.077)
listchannels_sec:40.300000-41.080000(40.668+/-0.29)
routing_sec:30.440000-31.030000(30.69+/-0.2)
peer_write_all_sec:50.060000-52.800000(51.416+/-0.91)
MCP notable changes from 2 patches ago (>1 stddev):
-listchannels_sec:48.560000-55.680000(52.642+/-2.7)
+listchannels_sec:40.300000-41.080000(40.668+/-0.29)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Plugins don't do it right anyway, and we're about to remove it from
lightningd. Produces same format as json_pp.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can save significant space by combining both sides: so much that we
can reduce the WIRE_LEN_LIMIT to something sane again.
MCP results from 5 runs, min-max(mean +/- stddev):
store_load_msec:34467-36764(35517.8+/-7.7e+02)
vsz_kb:2637488
store_rewrite_sec:35.310000-36.580000(35.816+/-0.44)
listnodes_sec:1.140000-2.780000(1.596+/-0.6)
listchannels_sec:55.390000-58.110000(56.998+/-0.99)
routing_sec:30.330000-30.920000(30.642+/-0.19)
peer_write_all_sec:50.640000-53.360000(51.822+/-0.91)
MCP notable changes from previous patch (>1 stddev):
-store_rewrite_sec:34.720000-35.130000(34.94+/-0.14)
+store_rewrite_sec:35.310000-36.580000(35.816+/-0.44)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Don't turn them to/from pubkeys implicitly. This means nodeids in the store
don't get converted, but bitcoin keys still do.
MCP results from 5 runs, min-max(mean +/- stddev):
store_load_msec:33934-35251(34531.4+/-5e+02)
vsz_kb:2637488
store_rewrite_sec:34.720000-35.130000(34.94+/-0.14)
listnodes_sec:1.020000-1.290000(1.146+/-0.086)
listchannels_sec:51.110000-58.240000(54.826+/-2.5)
routing_sec:30.000000-33.320000(30.726+/-1.3)
peer_write_all_sec:50.370000-52.970000(51.646+/-1.1)
MCP notable changes from previous patch (>1 stddev):
-store_load_msec:46184-47474(46673.4+/-4.5e+02)
+store_load_msec:33934-35251(34531.4+/-5e+02)
-vsz_kb:2638880
+vsz_kb:2637488
-store_rewrite_sec:46.750000-48.280000(47.512+/-0.51)
+store_rewrite_sec:34.720000-35.130000(34.94+/-0.14)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Outputs CSV. We add some stats for load times in developer mode, so we can
easily read them out.
peer_read_all_sec doesn't work, since we seem to reject about half the
updates for having bad signatures. It's also very slow...
routing fails, for unknown reasons, so that failure is ignored in routing_sec.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
39275-44779(40466.8+/-2.2e+03),2899248,41.010000-44.970000(41.972+/-1.5),2.280000-2.350000(2.304+/-0.025),49.770000-63.390000(59.178+/-5),33.310000-34.260000(33.62+/-0.35),42.100000-44.080000(43.082+/-0.67)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'fixup!_tools-bench-gossipd.sh__rough_benchmark_for_gossipd_and_the_million_channels_project-2.patch':
fixup! tools/bench-gossipd.sh: rough benchmark for gossipd and the million channels project
Suggested-by: @niftynei
Header from folded patch 'fixup!_tools-bench-gossipd.sh__rough_benchmark_for_gossipd_and_the_million_channels_project-1.patch':
fixup! tools/bench-gossipd.sh: rough benchmark for gossipd and the million channels project
MCP filename change.
Header from folded patch 'tools-bench-gossipd.sh__dont_print_csv_by_default.patch':
tools/bench-gossipd.sh: don't print CSV by default.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'fixup!_tools-bench-gossipd.sh__rough_benchmark_for_gossipd_and_the_million_channels_project.patch':
fixup! tools/bench-gossipd.sh: rough benchmark for gossipd and the million channels project
Make shellcheck happy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
fixup printing methods in devtools/decodemsg such that TLV's can
now be printed as well. here's how you'd use it:
$ ./devtools/decodemsg --tlv opening_tlv 0120001E020202020202020202020202020202020202020202020202020202020202
> WIRE_OPTION_UPFRONT_SHUTDOWN_SCRIPT (size 32):
> shutdown_scriptpubkey=[020202020202020202020202020202020202020202020202020202020202]
TLV's use var_int's for messages sizes, both internally and
in the top level (you should really stack a var_int inside a var_int!!)
this updates our automagick generator code to understand 'var_ints'
lisa neigut
Rusty Russell
GreenAddress
Christian Decker
Joe Netti