I got a corrupt file, which looked like multiple concurrent attempts
to build it. So instead, build it in one command, but also use
VERBOSE so we print correctly with V=1 (and --quiet).
Also move into plugins/ where it logically belongs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to want this for bolt13 formation as well.
As a result of reworking the logic into "candidate selection" then
"route hint selection", we need to change the way round-robin works.
We use a simple incrementing index now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's now only needed by devtools/mkfunding, so include a reduced one
there, and this also means we remove tx_spending_utxos().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This removes the reservation cleanup at startup, too, now they're all
using 'reserved_til'.
This changes test_withdraw, since it asserted that outputs were marked
spent as soon as we broadcast a transaction: now they're reserved until
it's mined. Similarly, test_addfunds_from_block assumed we'd see funds
as soon as we broadcast the tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` now randomizes input and output order, not BIP69.
We create ALL_PROGRAMS, ALL_TEST_PROGRAMS, ALL_C_SOURCES and
ALL_C_HEADERS. Then the toplevel Makefile knows which are
autogenerated (by wildcard), so it can have all the rules to clean
them or check the source as necessary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that other directories were explicitly depending on the generated
file, instead of relying on their (already existing) dependency on
$(LIGHTNINGD_HSM_CLIENT_OBJS), so we remove that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we now over-write the wally malloc/free functions, we need to do
so for tests as well. Here we pull up all of the common setup/teardown
logic into a separate place, and update the tests that use libwally to
use the new common_setup core
Changelog-None
Adds a new plugin notification for getting information about coin
movements. Also includes two 'helper' notification methods that can be
called from within lightningd. Separated from the 'common' set because
the lightningd struct is required to finalize the blockheight etc
Changelog-Added: Plugins: new notification type 'coin_movement'
Note that it's channeld which calculates the shared secret, too. This
minimizes the work that lightningd has to do, at cost of passing this
through.
We also don't yet save the blinding field(s) to the database.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
common/onion is going to need to use this for the case where it finds a blinding
seed inside the TLV. But how it does ecdh is daemon-specific.
We already had this problem for devtools/gossipwith, which supplied a
special hsm_do_ecdh(). This just makes it more general.
So we create a generic ecdh() interface, with a specific implementation
which subdaemons and lightningd can use.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes it clear we're dealing with a message which is a wrapped error
reply (needing unwrap_onionreply), not an already-wrapped one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the final step: we pass the complete fee_states to and from
channeld.
Changelog-Fixed: "Bad commitment signature" closing channels when we sent back-to-back update_fee messages across multiple reconnects.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This isn't plumbed in yet, but the idea is that every htlc gets put
into a "set" and then we process them once the set is satisfied. For
the !EXPERIMENTAL_FEATURES, the set is simply always size 1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now "raw_payload" is always the complete string (including realm or length
bytes at the front).
This has several effects:
1. We can receive an decrypt an onion which is grossly malformed.
2. We can still hand this to the htlc_accepted hook.
3. We then fail it unless the htlc_accepted accepts it manually.
4. The createonion API now takes the raw payload, and does not know
anything about "style".
The only caveat is that the sphinx code needs to know the payload
length: we have a call for that, which simply tells it to copy the
entire onion (and treat us as the final node) if it's invalid.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We want to have a static Tor service created from a blob bound to
our node on cmdline
Changelog-added: persistent Tor address support
Changelog-added: allow the Tor inbound service port differ from 9735
Signed-off-by: Saibato <saibato.naga@pm.me>
Add base64 encode/decode to common
We need this to encode the blob for the tor service
Signed-off-by: Saibato <saibato.naga@pm.me>
This adds a new pair of files : lightningd/plugin_control, along with a new RPC
command : 'plugin'. This command can be used to manage plugins without restarting lightningd:
lightning-cli plugin start helloworld.py
lightning-cli plugin stop helloworld.py
We're going to need this for P2WSH scripts. pull it out into
a common file plus adopt the sanity checks so that it will allow for
either P2WSH or P2WPKH (previously only encoded P2WPKH scripts)
These are generalized from our internal implementations.
The main difference is that 'struct json_escaped' is now 'struct
json_escape', so we replace that immediately.
The difference between lightningd's json-writing ringbuffer and the
more generic ccan/json_out is that the latter has a better API and
handles escaping transparently if something slips through (though
it does offer direct accessors so you can mess things up yourself!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Take into account the fee we'd have to pay if we're the funder, and
also drop to 0 if the amount is less than the smallest HTLC the peer
will accept.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Encapsulating the peer state was a win for lightningd; not surprisingly,
it's even more of a win for the other daemons, especially as we want
to add a little gossip information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are always handed to subdaemons as a set, so group them. This makes
it easier to add an fd (in the next patch).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Node ids are pubkeys, but we only use them as pubkeys for routing and checking
gossip messages. So we're packing and unpacking them constantly, and wasting
some space and time.
This introduces a new type, explicitly the SEC1 compressed encoding
(33 bytes). We ensure its validity when we load from the db, or get it
from JSON. We still use 'struct pubkey' for peer messages, which checks
validity.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
39475-39572(39518+/-36),2880732,41.150000-41.390000(41.298+/-0.085),2.260000-2.550000(2.336+/-0.11),44.390000-65.150000(58.648+/-7.5),32.740000-33.020000(32.89+/-0.093),44.130000-45.090000(44.566+/-0.32)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The current param_sat accepts "any": rename and move that to invoice.c
where it's called. We rename it to param_msat_or_any and invoice.c
is our first (trivial) amount_msat user.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I might have gone a bit overboard with the type-checking, but
typesafe_cb_cast is quite nice to use, so why not. The macro to
register a new hook encapsulates the entire flow from param
serialization, to dispatch, parsing and callback dispatch in one
bundle. I was tempted to have the callback outside of the
registration, but it's unlikely that we'll have two calls to the same
hook with different callbacks.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
json_escaped.[ch], param.[ch] and jsonrpc_errors.h move from lightningd/
to common/. Tests moved too.
We add a new 'common/json_tok.[ch]' for the common parameter parsing
routines which a plugin might want, taking them out of
lightningd/json.c (which now only contains the lightningd-specific
ones).
The rest is mainly fixing up includes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a bit different from the other cases: we need to iterate through
the peers and ask all the ones in openingd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We promote 'struct json_stream' to contain the membuf; we only attach
the json_stream to the command when we actually call
json_stream_success / json_stream_fail.
This means we are closer to 'struct json_stream' being an independent
layer; the tests are already modified to use it directly to create
JSON.
This is also the first step toward re-enabling non-serial command
execution.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's the only user of them, and it's going to get optimized.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
gossip.pydiff --git a/common/test/run-json.c b/common/test/run-json.c
index 956fdda35..db52d6b01 100644
This is a bit of overkill now that we simply accumulate the entire
JSON response in the buffer before flushing, but when we move to
streamed responses it allows us to have a single command that has
exclusive access to the out direction of the JSON-RPC connection.
Rusty Russell
niftynei
ZmnSCPxj jxPCSnmZ
Christian Decker
darosior
Saibato