We currently send channel_announcement as soon as we and our
peer agree it's 6 blocks deep. In theory, our other peers might
not have seen that block yet though, so delay a little.
This is mitigated by two factors:
1. lnd will stash any "not ready yet" channel_announcements anyway.
2. c-lightning doesn't enforce the 6 depth minimum at all.
We should not rely on other nodes' generosity or laxity, however!
Next release, we can start enforcing the depth limit, and maybe stashing
ones which don't quite make it (or simply enforce depth 5, not 6).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We normally reconnect after 1 second: have a flag to say wait for
60. This will be used in the next patch which handles "soft" errors.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'channel_fail_transient_slowretry.patch':
fixup! lightningd: add slow_reconnect flag for transient failure.
@ZmnSCPxj points out that function is unsafe, since omitting the bool
parameter still compiled. Make it two separate functions, each
with a distinctive name so every caller has to be fixed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's only one caller which used the flag.
As a side-effect, now we'll try reconnect even if the previous owner
was NULL (which mainly effects the case where we couldn't create the subd).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes a corner case when reconnecting (which restarts channeld) at depth=6
where we didn't correctly send/respond with announce_signatures.
NOTE: A complete restart of node may initialize channeld with unupdated height
because of an unfinished rescan. But when rescan is finished, funding tx_watch is
fired (at least once), which then tells channeld the latest depth.
Encapsulating the peer state was a win for lightningd; not surprisingly,
it's even more of a win for the other daemons, especially as we want
to add a little gossip information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Add remote_ann_node_sigs and remote_bitcoin_sigs fields in channel_init message;
2. Master add announcement signatures into channel_init message, and send this message to Channeld.
Channeld will initial the channel with this signatures when it reenables the channel.
Channeld sends announcement signatures to Master by this message.
When Channeld receive a new channel announcement msg, (After channel locking)it will sends announcement signatures to Master by this message.
These are always handed to subdaemons as a set, so group them. This makes
it easier to add an fd (in the next patch).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For me this happened only under valgrind with
test_option_upfront_shutdown_script (in a pending branch):
==5063== by 0x51FC076: raise (raise.c:48)
==5063== by 0x51DD534: abort (abort.c:79)
==5063== by 0x1292D2: fatal (log.c:647)
==5063== by 0x116570: channel_set_state (channel.c:340)
==5063== by 0x116E04: lockin_complete (channel_control.c:73)
==5063== by 0x116F15: peer_got_funding_locked (channel_control.c:108)
==5063== by 0x117354: channel_msg (channel_control.c:208)
No CHANGELOG: this was introduced in a recent refactor.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Rename channel_funding_locked to channel_funding_depth in
channeld/channel_wire.csv.
2. Add minimum_depth in struct channel in common/initial_channel.h and
change corresponding init function: new_initial_channel().
3. Add confirmation_needed in struct peer in channeld/channeld.c.
4. Rename channel_tell_funding_locked to channel_tell_depth.
5. Call channel_tell_depth even if depth < minimum, and still call
lockin_complete in channel_tell_depth, iff depth > minimum_depth.
6. channeld ignore the channel_funding_depth unless its >
minimum_depth(except to update billboard, and set
peer->confirmation_needed = minimum_depth - depth).
- Intrduce DB update `channel` values: `feerate_base` and `feerate_ppm`
- Make fist use of now context realted DB migration
- Add `struct channel` members of the same name
- Use struct values instead of config when commiting new channels
As a side-effect of using amount_msat in gossipd/routing.c, we explicitly
handle overflows and don't need to pre-prune ridiculous-fee channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christian and I both unwittingly used it in form:
*tal_arr_expand(&x) = tal(x, ...)
Since '=' isn't a sequence point, the compiler can (and does!) cache
the value of x, handing it to tal *after* tal_arr_expand() moves it
due to tal_resize().
The new version is somewhat less convenient to use, but doesn't have
this problem, since the assignment is always evaluated after the
resize.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do this a lot, and had boutique helpers in various places. So add
a more generic one; for convenience it returns a pointer to the new
end element.
I prefer the name tal_arr_expand to tal_arr_append, since it's up to
the caller to populate the new array entry.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
That matches the other CSV names (HSM was the first, so it was written
before the pattern emerged).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We could refine this later (based on existing wallet, for example), but
this gives some estimate.
[ Rename onchain_estimates -> onchain_fee_estimates Suggested-by: @SimonVrouwe ]
[ Factor of 1000 fix Reported-by: @SimonVrouwe ]
Suggested-by: @molxyz
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use feerate in several places, and each one really should react
differently when it's not available (such as when bitcoind is still
catching up):
1. For general fee-enforcement, we use the broadest possible limits.
2. For closingd, we use it as our opening negotiation point: just use half
the last tx feerate.
3. For onchaind, we can use the last tx feerate as a guide for our own txs;
it might be too high, but at least we know it was sufficient to be mined.
4. For withdraw and fund_channel, we can simply refuse.
Fixes: #1836
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't respond to fee changes until we're locked in: make sure we catch
up at that point.
Note that we use NORMAL fees during opening, but IMMEDIATE after, so
this often sends a fee update. The tests which break, we set those
feerates to be equal.
This (sometimes) changes the behavior of test_permfail, as we now
get an immediate commit, so that is fixed too so we always wait for
that to complete.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a noop if we're opening a new channel (channel_fees_can_change(channel)
is false until funding locked in), but important if we're restarting.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When in this state, we send a canned error "Awaiting unilateral close".
We enter this both when we drop to chain, and when we're trying to get
them to drop to chain due to option_data_loss_protect.
As this state (unlike channel errors) is saved to the database, it means
we will *never* talk to a peer again in this state, so they can't
confuse us.
Since we set this state in channel_fail_permanent() (which is the only
place we call drop_to_chain for a unilateral close), we don't need to
save to the db: channel_set_state() does that for us.
This state change has a subtle effect: we return WIRE_UNKNOWN_NEXT_PEER
instead of WIRE_TEMPORARY_CHANNEL_FAILURE as soon as we get a failure
with a peer. To provoke a temporary failure in test_pay_disconnect we
take the node offline.
Reported-by: Christian Decker @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we don't try to unilaterally close after a restart, *and*
we can tell onchaind to try to use the point to recover funds when the
peer unilaterally closes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For option_data_loss_protect, the peer can prove to us that it's ahead;
it gives us the (hopefully honest!) per_commitment_point it will use,
and we make sure we don't broadcast the commitment transaction we have.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We ignore incoming for now, but this means we advertize the option and
we send the required fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
connectd tells master about every disconnection, and master knows
whether it's important to reconnect. Just get the master to invoke a new
connect command if it considers the peer important!
The only twist is timeouts: we don't want to immediately reconnect if
we've failed to connect. To solve this, connectd passes a 'delaytime'
to the master when a connection fails, and the master passes it back
when it asks for a connection.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This will avoid us having to round-trip to the HSM each time we want it.
For now we still derive it, too, and assert it's correct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need this later, to generate its seed. When we switch to lnd's key system,
we'll only need this, and not peerid.
Note also that the peerid is not just for messages any more, too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Just have a "new depth" callback, and let channeld do the right thing.
This makes the channeld paths a bit more straightforward.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If channeld dies for some reason (eg, reconnect) and we didn't yet announce
the channel, we can miss doing so. This is unusual, because if lightningd
restarts it rearms the callback which gives us funding_locked, so it only
happens if just channel dies before sending the announcement message.
This problem applies to both temporary announcement (for gossipd) and
the real one. For the temporary one, simply re-send on startup, and
remote the error msg gossipd gives if it sees a second one. For the
real one, we need a flag to tell us the depth is sufficient; the peer
will ignore re-sends anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Simon Vrouwe
trueptolemy
trueptolemy
Michael Schmoock
ZmnSCPxj