Since we reference the channel ID to allow cascades in the database we also need
the ability to look up a channel by its database ID.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This will allow us in the next commit to store the transactions that triggered
this event in the DB and thus allowing us to replay them later on.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We used to queue the preimages to be sent to onchaind only after receiving the
onchaind_init_reply. Once we start replaying we might end up in a situation in
which we queue the tx that onchaind should react to before providing it with the
preimages. This commit just moves the preimages being sent, making it atomic
with the init, and without changing the order.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These were so far only used for bolt11 construction, but we'll need them for the
DNS seed as well, so here we just pull them out into their own unit and prefix
them.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
d822ba1ee accidentally removed this case, which is important: if the
other side didn't get our final matching closing_signed, it will
reconnect and try again. We consider the channel no longer "active"
and thus ignore it, and get upset when it send the
`channel_reestablish` message.
We could just consider CLOSINGD_COMPLETE to be active, but then we'd
have to wait for the closing transaction to be mined before we'd allow
another connection.
We can't special case it when the peer reconnects, because there
could be (in theory) multiple channels for that peer in CLOSINGD_COMPLETE,
and we don't know which one to reestablish.
So, we need to catch this when they send the reestablish, and hand
that msg to closingd to do negotiation again. We already have code
to note that we're in CLOSINGD_COMPLETE and thus ignore any result
it gives us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're about to remove automatic retrying of connect, and that uncovered
that we actually print out our "Server started" message before we create
the listening socket.
Move the init higher (outside the db transaction) and make it a
request/response, the loop until it's done.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The new connect code revealed an existing race: we tell gossipd to
release the peer, but at the same time it connects in. gossipd fails
the release because the peer is remote, and json_fundchannel fails.
Instead, we catch this race when we get peer_connected() and we were
trying to open a channel. It means keeping a list of fundchannels which
are awaiting a gossipd response though.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We missed it in some corner cases where we crashed/were killed between
being told of the lockin and sending the channel_normal_operation message.
When we were restarted, we were told both sides were locked in already,
so we never updated the state.
Pull the entire "tell channeld" logic into channel_control.c, and make
it clear that we need to keep waching if we cant't tell channeld. I think
we did get this correct in practice, since funding_announce_cb has the
same test, but it's better to be clear.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We'd usually commit to the db soon, but there's a window where it
could be missed.
Also moves loc into the block it's used and make it tmpctx to avoid
an explicit free.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Without this, we can get errors on shutdown:
Valgrind error file: valgrind-errors.27444
==27444== Invalid read of size 8
==27444== at 0x1950E2: secp256k1_pubkey_load (secp256k1.c:127)
==27444== by 0x19CF87: secp256k1_ec_pubkey_serialize (secp256k1.c:189)
==27444== by 0x14FED9: towire_pubkey (towire.c:59)
==27444== by 0x15AAFB: towire_gossipctl_peer_disconnected (gen_gossip_wire.c:969)
==27444== by 0x1253EF: opening_channel_errmsg (opening_control.c:526)
==27444== by 0x1386A3: destroy_subd (subd.c:589)
==27444== by 0x18222C: notify (tal.c:240)
==27444== by 0x1826E1: del_tree (tal.c:400)
==27444== by 0x182733: del_tree (tal.c:410)
==27444== by 0x182733: del_tree (tal.c:410)
==27444== by 0x182B1F: tal_free (tal.c:511)
==27444== by 0x11FC53: main (lightningd.c:410)
==27444== Address 0x6c3af98 is 72 bytes inside a block of size 216 free'd
==27444== at 0x4C30D3B: free (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==27444== by 0x1827BC: del_tree (tal.c:421)
==27444== by 0x182B1F: tal_free (tal.c:511)
==27444== by 0x11F3C7: shutdown_subdaemons (lightningd.c:211)
==27444== by 0x11FC27: main (lightningd.c:406)
==27444== Block was alloc'd at
==27444== at 0x4C2FB0F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==27444== by 0x182296: allocate (tal.c:250)
==27444== by 0x182863: tal_alloc_ (tal.c:448)
==27444== by 0x12F2DF: new_peer (peer_control.c:74)
==27444== by 0x125600: new_uncommitted_channel (opening_control.c:576)
==27444== by 0x125870: peer_accept_channel (opening_control.c:668)
==27444== by 0x13032A: peer_sent_nongossip (peer_control.c:427)
==27444== by 0x116B9E: peer_nongossip (gossip_control.c:60)
==27444== by 0x116F2B: gossip_msg (gossip_control.c:172)
==27444== by 0x138323: sd_msg_read (subd.c:503)
==27444== by 0x137C02: read_fds (subd.c:330)
==27444== by 0x175550: next_plan (io.c:59)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Also report tx and txid, and whether we closed unilaterally or
bilaterally, if we could close the channel.
Also make a manpage.
Fixes: #1207Fixes: #714Fixes: #622
We had an intermittant test failure, where the fee we negotiated was
further from our ideal than the final commitment transaction. It worked
fine if the other side sent the mutual close first, but not if we sent
our unilateral close first.
ERROR: test_closing_different_fees (__main__.LightningDTests)
----------------------------------------------------------------------
Traceback (most recent call last):
File "tests/test_lightningd.py", line 1319, in test_closing_different_fees
wait_for(lambda: p.rpc.listpeers(l1.info['id'])['peers'][0]['channels'][0]['status'][1] == 'ONCHAIN:Tracking mutual close transaction')
File "tests/test_lightningd.py", line 74, in wait_for
raise ValueError("Error waiting for {}", success)
ValueError: ('Error waiting for {}', <function LightningDTests.test_closing_different_fees.<locals>.<lambda> at 0x7f4b43e31a60>)
Really, if we're prepared to negotiate it, we should be prepared to
accept it ourselves. Simply take the cheapest tx which is above our
minimum.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The only use for these was to compute their txids so we could notify depth
in case of reorgs.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We are slowly hollowing out the in-memory blockchain representation to make
restarts easier.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
All of the callback functions were only using the tx to generate the txid again,
so we just pass that in directly and save passing the tx itself.
This is a simplification to move to the DB backed depth callbacks. It'd be
rather wasteful to read the rawtx and deserialize just to serialize right away
again to find the txid, when we already searched the DB for exactly that txid.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This will later allow us to determine the transaction confirmation count, and
recover transactions for rebroadcasts.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Internally both payment and routing use 64-bit, but the interface
between them used 32-bit.
Since both components already support 64-bit we should use that.
In the short_channel_id check we were copying the entire result into the next
bitcoin-cli call, including the newline character.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Reported-By: @gdassori
Creating the pid-file before daemonizing results in the pid-file containing the
pid of the process that started the daemon, but is now dead.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Reported-By: Torkel Rogstad @torkelrogstad
We can have more than one; eg we might offer both bech32 and a p2sh
address, and in future we might offer v1 segwit, etc.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are two very hard problems in software engineering:
1. Off-by-one errors
In this case we were rolling back further than needed and we were starting the
catchup one block further than expected.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
I saw a failure in test_funding_fail():
assert l2.rpc.listpeers()['peers'][0]['connected']
This can happen if l2 hasn't yet handed back to gossipd. Turns out
we didn't mark uncommitted channels as connected:
[{'id': '03afa3c78bb39217feb8aac308852e6383d59409839c2b91955b2d992421f4a41e', 'connected': False, 'channels': [{'state': 'OPENINGD', 'owner': 'lightning_openingd', 'funder': 'REMOTE', 'status': ['Incoming channel: accepted, now waiting for them to create funding tx']}]}]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is probably covered by our "channel capacity" heuristic which
requires the channel be significant, but best to be explicit and sure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
So we know how much counterparty could theoretically steal from us
(msatoshi_to_us - msatoshi_to_us_min) and how much we could
theoretically steal from counterparty (msatoshi_to_us_max -
msatoshi_to_us).
For more piloting goodness.
In particular, the main daemon and subdaemons share the backtrace code,
with hooks for logging.
The daemon hook inserts the io_poll override, which means we no longer
need io_debug.[ch]. Though most daemons don't need it, they still link
against ccan/io, so it's harmess (suggested by @ZmnSCPxj).
This was tested manually to make sure we get backtraces still.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I didn't convert all tests: they can still use a standalone context.
It's just marginally more efficient to share the libwally one for all
our daemons which link against it anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we only remember the actions that added channels then we'd restore them when
re-reading the gossip_store, so put a tombstone in there to remember to delete
it. These will be cleared upon re-writing the store since the announcements wont
be written anymore.
Signed-off-by: Christian Decker <decker.christian@gmail.com>