This is the final step: we pass the complete fee_states to and from
channeld.
Changelog-Fixed: "Bad commitment signature" closing channels when we sent back-to-back update_fee messages across multiple reconnects.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These used to be necessary as we could have feerate changes which
we couldn't track: now we do, we don't need these flags.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is an intermediary step: we still don't save it to the database,
but we do use the fee_states struct to track it internally.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Travis randomly picked up an error in test_feerate_stress:
**BROKEN** 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-channeld-chan#1: Cannot add htlc #0 10000msat to LOCAL (version a2541b9-modded)
This is because it hit an unlikely corner case involving applying multiple HTLCs
(similar to the previous c96cee9b8d).
In this case, the test sends a 500,000,000 "balancing" setup payment L1->L2.
It waits for L2 to get the preimage (which is the when pay() helper returns),
but crucially, it starts spamming with HTLCs before that HTLC is completely
removed.
From L2's point of view, the setup HTLC is in state RCVD_REMOVE_REVOCATION;
gone from L1's commitment tx, but still waiting for the commitment_signed
from L1 to remove it from L2's.
Note that each side keeps a local and remove view of both sides' current
balances: at this point, L2's view is REMOTE: "500,000,000 to L1, 499,900,000
to L2", LOCAL: "500,000,000 to L1, 0 to L2".
L2 sends a 10,000 msat HTLC to L1: legal, since L1 will allow it,
then the commitment_signed. L1 sends the revoke-and-ack for this,
*then* belatedly follows with the commitment_signed which both completes the
removal of the setup HTLC and adds the new one.
But L2 processes the HTLCs in hashtable (i.e. random) order: so if it
tries to apply its own HTLC first, it freaks out because it doesn't have
funds in its local view.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Unlikely corner case is simultanous HTLCs near balance limits fixed.
A long time ago (93dcd5fed7), I
simplified the htlc reload code so it adjusted the amounts for HTLCs
in id order. As we presumably allowed them to be added in that order,
this avoided special-casing overflow (which was about to deliberately
be made harder by the new amount_msat code).
Unfortunately, htlc id order is not canonical, since htlc ids are
assigned consecutively in both directions! Concretely, we can have two HTLCs:
HTLC #0 LOCAL->REMOTE: 500,000,000 msat, state RCVD_REMOVE_REVOCATION
HTLC #0 REMOTE->LOCAL: 10,000 msat, state SENT_ADD_COMMIT
On a new remote-funded channel, in which we have 0 balance, these
commits *only* work in this order. Sorting by HTLC ID is not enough!
In fact, we'd have to worry about redemption order as well, as that
matters.
So, regretfully, we offset the balances halfway to UINT64_MAX, then check
they didn't underflow at the end. This loses us this one sanity check,
but that's probably OK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
WIRE_REQUIRED_CHANNEL_FEATURE_MISSING anticipates a glorious Wumbo future,
and is closer to correct (it's a PERM failure).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The largest change is inside hsmd: it hands a null per-commitment key
to the wallet to tell it to spend the to_remote output.
It can also now resolve unknown commitments, even if it doesn't have a
possible_remote_per_commitment_point from the peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than reaching into data structures, let them register their own
callbacks. This avoids us having to expose "memleak_remove_xxx"
functions, and call them manually.
Under the hood, this is done by having a specially-named tal child of
the thing we want to assist, containing the callback.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The way we build transactions, serialize them, and compute fees depends on the
chain we are working on, so let's add some context to the transactions.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
And clean up some dev ones which actually happen (mainly by calling
channel_fail_permanent which logs UNUSUAL, rather than
channel_internal_error which logs BROKEN).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We track whether each change is affordable as we go;
test_channel_drainage got us so close that the difference mattered; we
hit an assert when we tried to commit the tx and realized we couldn't
afford it.
We should not be trying to add an HTLC if it will result in the funder
being unable to afford it on either the local *or remote* commitments.
Note the test still "fails" because it refuses to send the final
payment.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Rename channel_funding_locked to channel_funding_depth in
channeld/channel_wire.csv.
2. Add minimum_depth in struct channel in common/initial_channel.h and
change corresponding init function: new_initial_channel().
3. Add confirmation_needed in struct peer in channeld/channeld.c.
4. Rename channel_tell_funding_locked to channel_tell_depth.
5. Call channel_tell_depth even if depth < minimum, and still call
lockin_complete in channel_tell_depth, iff depth > minimum_depth.
6. channeld ignore the channel_funding_depth unless its >
minimum_depth(except to update billboard, and set
peer->confirmation_needed = minimum_depth - depth).
We need to do it in various places, but we shouldn't do it lightly:
the primitives are there to help us get overflow handling correct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a side-effect of using amount_msat in gossipd/routing.c, we explicitly
handle overflows and don't need to pre-prune ridiculous-fee channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to just throw htlcs into the channel with a flag to tell it to
ignore overflow. Instead, we can insert them in order (which is the same as
id order) which always must be valid.
This helps when we turn the balance into a struct amount_msat which will get
upset with overflows.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christian and I both unwittingly used it in form:
*tal_arr_expand(&x) = tal(x, ...)
Since '=' isn't a sequence point, the compiler can (and does!) cache
the value of x, handing it to tal *after* tal_arr_expand() moves it
due to tal_resize().
The new version is somewhat less convenient to use, but doesn't have
this problem, since the assignment is always evaluated after the
resize.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Funder can't spend the fee it needs to pay for the commitment transaction:
we were not converting to millisatoshis, however!
This breaks our routeboost test, which no longer has sufficient funds
to make payment.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This simplifies lifetime assumptions. Currently all callers keep the
original around, but everything broke when I changed that in the next
patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They were not universally used, and most are trivial accessors anyway.
The exception is getting the channel reserve: we have to multiply by 1000
as well as flip direction, so keep that one.
The BOLT quotes move to `struct channel_config`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do this a lot, and had boutique helpers in various places. So add
a more generic one; for convenience it returns a pointer to the new
end element.
I prefer the name tal_arr_expand to tal_arr_append, since it's up to
the caller to populate the new array entry.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
tal_count() is used where there's a type, even if it's char or u8, and
tal_bytelen() is going to replace tal_len() for clarity: it's only needed
where a pointer is void.
We shim tal_bytelen() for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The master tells us the short_channel_id of the outgoing channel when
failing an HTLC, but channeld didn't store it anywhere. It also
didn't tell channeld the short_channel_id in the case where we're
reconnecting and it's feeding us an array of failed htlcs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I'm not completely convinced that it's only ever set to a failcode
with the BADONION bit set, especially after the previous patches in
this series. Now that channeld can handle arbitrary failcodes passed
this way, simply rename it.
We add marshalling assertions that only one of failcode and failreason
is set, and we unmarshal an empty 'fail' to NULL (just the the
generated unmarshalling code does).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
None of these sanity checks should fail, but let's be thorough: we
were testing for htlc->fail but not failcode when fulfilling an HTLC.
The failing-htlc case had this correct already.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
'struct htlc' in channeld has a 'malformed' field, which is really only
used in the "retransmit updates on reconnect" case. That's quite confusing,
and I'm not entirely convinced that it can only be set to a failcode
with the BADONION bit set.
So generalize it, using the same logic we use in the master daemon:
failcode: a locally generated error, for channeld to turn into the appropriate
error message.
fail: a remotely generated onion error, for forwarding.
Either of these being non-zero/non-NULL means we've failed, and only one
should be set at any time.
We unify the "send htlc fail/fulfill update due to retransmit" and the
normal send update paths, by always calling send_fail_or_fulfill.
This unification revealed that we accidentally skipped the
onion-wrapping stage when we retransmit failed htlcs!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
structeq() is too dangerous: if a structure has padding, it can fail
silently.
The new ccan/structeq instead provides a macro to define foo_eq(),
which does the right thing in case of padding (which none of our
structures currently have anyway).
Upgrade ccan, and use it everywhere. Except run-peer-wire.c, which
is only testing code and can use raw memcmp(): valgrind will tell us
if padding exists.
Interestingly, we still declared short_channel_id_eq, even though
we didn't define it any more!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Christian Decker
darosior
Rene Pickhardt
Michael Schmoock
trueptolemy
practicalswift