1. Add special option where an empty host means 'wildcard for IPv4 and/or IPv6'
which means ':1234' can be used to set only the portnum.
2. Only add this protocol wildcard if --autolisten=1 (default)
and no other addresses specified.
3. Pass it down to gossipd, so it can handle errors correctly: in most cases,
it's fatal not to be able to bind to a port, but for this case, it's OK
if we can only bind to one of IPv4/v6 (fatal iff neither).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This replacement is a little menial, but it explicitly catches all
the places where we allow a local socket. The actual implementation of
opening a AF_UNIX socket is almost hidden in the patch.
The detection of "valid address" is now more complex:
p->addr.itype != ADDR_INTERNAL_WIREADDR || p->addr.u.wireaddr.type != ADDR_TYPE_PADDING
But most places we do this, we should audit: I'm pretty sure we can't
get an invalid address any more from gossipd (they may be in db, but
we should fix that too).
Closes: #1323
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It does all the other address handling, do this too. It also proves useful
as we clean up wildcard address handling.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we only bind to addresses in our wireaddrs array, we would not
autobind to local sockets if they couldn't reach google's nameserver.
That's clearly wrong: we should only not bind if there's a protocol
issue (eg. no IPv6 support).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's become clear that our network options are insufficient, with the coming
addition of Tor and unix domain support.
Currently:
1. We always bind to local IPv4 and IPv6 sockets, unless --port=0, --offline,
or any address is specified explicitly. If they're routable, we announce.
2. --addr is used to announce, but not to control binding.
After this change:
1. --port is deprecated.
2. --addr controls what we bind to and announce.
3. --bind-addr/--announce-addr can be used to control one and not the other.
4. Unless --autolisten=0, we add local IPv4 & IPv6 port 9735 (and announce if they are routable).
5. --offline still overrides listening (though announcing is still the same).
This means we can bind to as many ports/interfaces as we want, and for
special effects we can announce different things (eg. we're sitting
behind a port forward or a proxy).
What remains to implement is semi-automatic binding: we should be able
to say '--addr=0.0.0.0:9999' and have the address resolve at bind
time, or even '--addr=0.0.0.0:0' and have the port autoresolve too
(you could determine what it was from 'lightning-cli getinfo'.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We set no_reconnect with --offline, but that doesn't work if !DEVELOPER.
Make the flag positive, and non-DEVELOPER mode for gossipd.
We also don't override portnum with --offline, but have an explicit
'listen' flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can create the hsm file from python directly; that works even if we
don't have DEVELOPER set, and is simpler.
We add a test that the aliases are correct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Originally we were supposed to tell the HSM we had just created the directory,
otherwise it wouldn't create a new seed. But we modified it to check if
there was a seed file anyway: just move that logic into a branch of hsmd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No new functionality, just a continuation of my work toward completing #665.
I removed the common members of `struct withdrawal` and `struct fund_channel`
and placed them in a new `struct wallet_tx`. Then it was fairly straightforward
to reimplement the existing code in terms of `wallet_tx`.
Since I made some structural changes I wanted to get this approved before I
go any farther.
Added 'all' to fundchannel help message.
Fixes: #1445
Hacky fix, possibly. First cut at avoiding starting up onchaind and gossipd (which might make queries of chaintopology, which might start up a bitcoin-cli) before we can daemonize.
We're getting spurious closures, even on mainnet. Using --ignore-fee-limits
is dangerous; it's slightly less so to lower the minimum (which is the
usual cause of problems).
So let's halve it, but beware the floor.
This is a workaround, until we get independent feerates in the spec.
Fixes: #613
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means gossipd is live and we can tell it things, but it won't
receive incoming connections. The split also means that the main daemon
continues (eg. loading peers from db) while gossipd is loading from the store,
potentially speeding startup.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we start accepting peer connections before we initialized some of the other
parts (mainly the chaintopology) we could end up asking for stuff that isn't
ready yet (blockchain head for example).
Signed-off-by: Christian Decker <decker.christian@gmail.com>
If channeld dies for some reason (eg, reconnect) and we didn't yet announce
the channel, we can miss doing so. This is unusual, because if lightningd
restarts it rearms the callback which gives us funding_locked, so it only
happens if just channel dies before sending the announcement message.
This problem applies to both temporary announcement (for gossipd) and
the real one. For the temporary one, simply re-send on startup, and
remote the error msg gossipd gives if it sees a second one. For the
real one, we need a flag to tell us the depth is sufficient; the peer
will ignore re-sends anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When we get a reconnection, kill the current remote peer, and wait for the
master to tell us it's dead. Then we hand it the new peer.
Previously, we would end up with gossipd holding multiple peers, and
the logging was really hard to interpret; I'm not completely convinced
that we did the right thing when one terminated, either.
Note that this now means we can have peers with neither ->local nor ->remote
populated, so we check that more carefully.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently we intuit it from the fd being closed, but that may happen out
of order with when the master thinks it's dead.
So now if the gossip fd closes we just ignore it, and we'll get a
notification from the master when the peer is disconnected.
The notification is slightly ugly in that we have to disable it for
a channel when we manually hand the channel back to gossipd.
Note: as stands, this is racy with reconnects. See the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This was sitting in my gossip-enchancement patch queue, but it simplifies
this set too, so I moved it here).
In 94711969f we added an explicit gossip_index so when gossipd gets
peers back from other daemons, it knows what gossip it has sent (since
gossipd can send gossip after the other daemon is already complete).
This solution is insufficient for the more general case where gossipd
wants to send other messages reliably, so replace it with the other
solution: have gossipd drain the "gossip fd" which the daemon returns.
This turns out to be quite simple, and is probably how I should have
done it originally :(
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Lifetime of 'struct reaching' now only while we're actively doing connect.
2. Always free after a single attempt: if it's an important peer, retry
on a timer.
3. Have a single response message to master, rather than relying on
peer_connected on success and other msgs on failure.
4. If we are actively connecting and we get another command for the same
id, just increment the counter
The result is much simpler in the master daemon, and much nicer for
reconnection: if they say to connect they get an immediate response,
rather than waiting for 10 retries. Even if it's an important peer,
it fires off another reconnect attempt, unless it's actively
connecting now.
This removes exponential backoff: that's restored in next patch. It
also doesn't handle multiple addresses for a single peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And on channel_fail_permanent and closing (the two places we drop to
chain), we tell gossipd it's no longer important.
Fixes: #1316
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These don't have a maximum number of reconnect attempts, and ensure
that we try to reconnect when the peer dies.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Simplification of the offset calculation to use the rescan parameter, and rename
of `wallet_first_blocknum`. We now use either relative rescan from our last
known location, or absolute if a negative rescan was given. It's all handled in
a single location (except the case in which the blockcount is below our
precomputed offset), so this should reduce surprises.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is intended to recover from an inconsistent state, involving
`onchaind`. Should we for some reason not restore the `onchaind` process
correctly we can instruct `lightningd` to go back in time and just replay
everything.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Since we reference the channel ID to allow cascades in the database we also need
the ability to look up a channel by its database ID.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This will allow us in the next commit to store the transactions that triggered
this event in the DB and thus allowing us to replay them later on.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We used to queue the preimages to be sent to onchaind only after receiving the
onchaind_init_reply. Once we start replaying we might end up in a situation in
which we queue the tx that onchaind should react to before providing it with the
preimages. This commit just moves the preimages being sent, making it atomic
with the init, and without changing the order.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These were so far only used for bolt11 construction, but we'll need them for the
DNS seed as well, so here we just pull them out into their own unit and prefix
them.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
d822ba1ee accidentally removed this case, which is important: if the
other side didn't get our final matching closing_signed, it will
reconnect and try again. We consider the channel no longer "active"
and thus ignore it, and get upset when it send the
`channel_reestablish` message.
We could just consider CLOSINGD_COMPLETE to be active, but then we'd
have to wait for the closing transaction to be mined before we'd allow
another connection.
We can't special case it when the peer reconnects, because there
could be (in theory) multiple channels for that peer in CLOSINGD_COMPLETE,
and we don't know which one to reestablish.
So, we need to catch this when they send the reestablish, and hand
that msg to closingd to do negotiation again. We already have code
to note that we're in CLOSINGD_COMPLETE and thus ignore any result
it gives us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're about to remove automatic retrying of connect, and that uncovered
that we actually print out our "Server started" message before we create
the listening socket.
Move the init higher (outside the db transaction) and make it a
request/response, the loop until it's done.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The new connect code revealed an existing race: we tell gossipd to
release the peer, but at the same time it connects in. gossipd fails
the release because the peer is remote, and json_fundchannel fails.
Instead, we catch this race when we get peer_connected() and we were
trying to open a channel. It means keeping a list of fundchannels which
are awaiting a gossipd response though.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We missed it in some corner cases where we crashed/were killed between
being told of the lockin and sending the channel_normal_operation message.
When we were restarted, we were told both sides were locked in already,
so we never updated the state.
Pull the entire "tell channeld" logic into channel_control.c, and make
it clear that we need to keep waching if we cant't tell channeld. I think
we did get this correct in practice, since funding_announce_cb has the
same test, but it's better to be clear.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We'd usually commit to the db soon, but there's a window where it
could be missed.
Also moves loc into the block it's used and make it tmpctx to avoid
an explicit free.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>