Each state (effectively, each daemon) has two slots: a permanent slot
if something permanent happens (usually, a failure), and a transient
slot which summarizes what's happening right now.
Uncommitted channels only have a transient slot, by their very nature.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And now we can finally do the db upgrade to remove any OPENINGD
channels once, since we never put them back.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's giant, but it's encapsulating at least. It is called from the wallet
code when loading channels, or from the opening code when converting
an uncommitted_channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now any struct channel is a genuine channel, the following fields are
always valid:
1. funding_txid: doesn't need to be a pointer.
2. our_msatoshi: doesn't need to be a pointer.
3. last_sig: doesn't need to be a pointer.
4. channel_info: doesn't need to be a pointer.
In addition, 'last_tx' is always valid.
The main effect is to remove a whole heap of branches from the wallet code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we create new entries from wallet_channel_insert(), there's no
need for the branches. And indeed, many wallet functions can be
static.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We derive the seed from this, so it needs to be unique, but using
rowid forced us to put the channel into the db early, before it
was ready.
Instead, use a counter to ensure uniqueness, initialized when we load
existing peers. This doesn't need to touch the database at all.
As we now have only two places where the channel is committed (the
funder and fundee paths), so we create a new explicit
'wallet_channel_insert()' function: 'wallet_channel_save()' now just
updates.
Note that this also fixes some weirdness in
wallet_channels_load_active: we strangely avoided loading channels in
CLOSINGD_COMPLETE (which fortunately was a transient state, so
unlikely anyone hit this). Note that since the lines above already
delete all the OPENINGD channels, we now simply load them all.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Adds a simple check that compares genesis-blockhashes from the
chainparams against the blockhash that the wallet was created
with. The wallet is network specific, so mixing is always a bad idea.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
ZmnSCPxj queried the unilateral close case, so make that clearer.
Christian raise concerns about existing channels, so make it clear
what we're doing there too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We only need to do that if it's possible there's something to find:
either we have an unspent output from a unilateral close, or we've
ever handed out an address.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
With fallback depending on chainparams: this means the first upgrade
will be slow, but after that it'll be fast.
Fixes: #990
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We usually did this, but sometimes they were named after what they did,
rather than what they cleaned up.
There are still a few exceptions:
1. I didn't bother creating destroy_xxx wrappers for htable routines
which already existed.
2. Sometimes destructors really are used for side-effects (eg. to simply
mark that something was freed): these are clearer with boutique names.
3. Generally destructors are static, but they don't need to be: in some
cases we attach a destructor then remove it later, or only attach
to *some* cases. These are best with qualifiers in the destroy_<type>
name.
Suggested-by: @ZmnSCPxj
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This provides a sanity check that we are in sync, and also keeps the
logic in the program and out of the SQL.
Since the destructor now doesn't clean up the peer, there are some
wider changes to be made when cleaning up. Most notably we create
lots of channels in run-wallet.c and they previously freed the peer:
now we need free the peer explicitly, so we need to free them first.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Much like the database; peer contains id, address, channel contains
per-channel information. Where we create a channel, we always create
the peer too.
For the moment, peer->log and channel->log coexist side-by-side, to
reduce some of the churn.
Note that this changes the API to dev-forget-channel: if we have more
than one channel, we insist they specify the short-channel-id.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Both when we forget about an opening peer, and at startup. We're
going to be relying on this, and the next patch, as we refactor
peer/channel handling to mirror the db.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Still writing the channel since some of the channel setup parameters
depends on `chan->id` to be set. If we later set the `chan->id`
signatures fail. This prevents OPENINGD channels showing up after
restarting.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We were sideloading it, which is awkward, now it's a field that we can
actually use in the code.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Maintaining it was always fraught, since the command could go away
if the JSON RPC died. Most recently, it was broken again on shutdown
(see below).
In future we may allow pay commands to block on previous payments, so
it won't even be a 1:1 mapping. Generalize it: keep commands in a
simple list and do a lookup when a payment fails/succeeds.
Valgrind error file: valgrind-errors.5732
==5732== Invalid read of size 8
==5732== at 0x4149FD: remove_cmd_from_hout (pay.c:292)
==5732== by 0x468BAB: notify (tal.c:237)
==5732== by 0x469077: del_tree (tal.c:400)
==5732== by 0x4690C7: del_tree (tal.c:410)
==5732== by 0x46948A: tal_free (tal.c:509)
==5732== by 0x40F1EA: main (lightningd.c:362)
==5732== Address 0x69df148 is 1,512 bytes inside a block of size 1,544 free'd
==5732== at 0x4C2EDEB: free (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==5732== by 0x469150: del_tree (tal.c:421)
==5732== by 0x46948A: tal_free (tal.c:509)
==5732== by 0x4198F2: free_htlcs (peer_control.c:1281)
==5732== by 0x40EBA9: shutdown_subdaemons (lightningd.c:209)
==5732== by 0x40F1DE: main (lightningd.c:360)
==5732== Block was alloc'd at
==5732== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==5732== by 0x468C30: allocate (tal.c:250)
==5732== by 0x4691F7: tal_alloc_ (tal.c:448)
==5732== by 0x40A279: new_htlc_out (htlc_end.c:143)
==5732== by 0x41FD64: send_htlc_out (peer_htlcs.c:397)
==5732== by 0x41511C: send_payment (pay.c:388)
==5732== by 0x41589E: json_sendpay (pay.c:513)
==5732== by 0x40D9B1: parse_request (jsonrpc.c:600)
==5732== by 0x40DCAC: read_json (jsonrpc.c:667)
==5732== by 0x45C706: next_plan (io.c:59)
==5732== by 0x45D1DD: do_plan (io.c:387)
==5732== by 0x45D21B: io_ready (io.c:397)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The previous tests didn't make sense anyway, but I think they were trying
to exclude onchain channels.
We delete completely forgotten channels anyway now, so we don't need
such testing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
From test_reconnect_sender_add1:
lightningd(13643):BROKEN: backtrace: wallet/wallet.c:1537 (wallet_payment_set_status) 0x561c91b03080
lightningd(13643):BROKEN: backtrace: lightningd/pay.c:67 (payment_failed) 0x561c91ac4f99
lightningd(13643):BROKEN: backtrace: lightningd/peer_htlcs.c:132 (fail_out_htlc) 0x561c91acf627
lightningd(13643):BROKEN: backtrace: lightningd/peer_htlcs.c:321 (hout_subd_died) 0x561c91acfb62
When payment fails, we call wallet_payment_set_status; this is perfectly
possible before it's been committed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For performance, we delay entering the 'wallet_payment' into the db
until we actually commit to the HTLC (when we have to touch the DB
anyway).
This opens a race where we can try to pay twice, and since it's not in
the database yet, we don't notice the duplicate.
So remove the temporary payment field from htlc_out, which was always
an uncomfortable hack, and make the wallet code abstract over the
deferred entry a little by maintaining a 'unstored_payments' list
and incorporating that in results.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need these to decode any returned errors.
We remove it from struct pay_command too, and load directly from db
when we need it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We should be saving this, as it's our proof of payment. Also, we return
it if they try to pay again.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christian Decker
Igor Cota
ZmnSCPxj
Rusty Russell
practicalswift