The previous dev-force-features forced you to explicitly declare every
desired feature bit in an array, for each set.
Here, we allow you to also denote adding/subtracing a feature bit
by just passing in the number of the bit to flip and the direction to
turn it. e.g.
'dev-force-features': '+223'
Will turn on opt_dual_fund/odd.
'dev-force-features': '-16'
Will flag off opt_basic_mpp.
This is simple, and we now can multifundchannel to every node on testnet
(one simply hangs once we connect).
Changelog-Fixed: Protocol: We now hang up if peer doesn't respond to init message after 60 seconds.
Too trivial a fix to really list in Changelog, but I noticed that we
specified "wumbo" twice. We should really just use the proper name
in listconfigs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As per https://github.com/lightningnetwork/lightning-rfc/pull/785
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: config: the default CLTV expiry is now 34 blocks, and final expiry 18 blocks as per new BOLT recommendations.
Changelog-Added: New option `--important-plugin` loads a plugin is so important that if it dies, `lightningd` will exit rather than continue. You can still `--disable-plugin` it, however, which trumps `--important-plugin` and it will not be started at all.
Reduces VALGRIND=1 node_factory.line_graph(5) time on my laptop from 42s to 36s.
This is simply because forking all the subdaemons just to check the
version is very expensive under valgrind.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We did not take the value of --commit-fee into account : this removes
the unused option from lightningd and instead registers it in bcli,
where we set the actual feerate of commitment transactions. This also
corrects the documentation.
Changelog-Fixed: config: we now take the --commit-fee parameter into account.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
The previous implementation was a bit lazy: in particular, since we didn't
remember the disabled plugins, we would load them on rescan.
Changelog-Changed: config: the `plugin-disable` option works even if specified before the plugin is found.
This will let us unify the startup and runtime-started infrastructure.
Note that there are two kinds of notifications:
1. Starting a single plugin (i.e. `plugin start`)
2. Starting multiple plugins (i.e. `plugin rescan` or `plugin startdir`).
In the latter case, we want the command to complete only once *all*
the plugins are dead/finished.
We also call plugin_kill() in all cases, and correctly return afterwards
(it matters once we use the same paths for dynamic plugins, which don't
cause a fatal error if they don't startup).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's almost always "their_features" and "our_features" respectively, so
make those names clear.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out that unnecessary: all callers can access the feature_set,
so make it much more like a normal primitive.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is to prepare for dynamic features, including making plugins first
class citizens at setting them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: lightningd: Added --subdaemon command to allow alternate subdaemons.
[ Wow, that was mammoth; 44 comments over 12 commits. Feels almost unfair to squash it into one commit, so I wanted to note @ksedgwic's perseverence here! --RR ]
We could use sendonion to do this, but it actually takes a different path through
pay, and I wanted to test all of it, so I made a new dev flag.
We currently get upset with the response:
lightningd/pay.c:556: payment_failed: Assertion `!hout->failcode' failed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
json_listconfigs() returns in the middle; the name0 is not always freed.
It will be freed later with the response, but our memleak detection doesn't
know that, and Travis caught it:
Global errors:
E - Node /tmp/ltests-5mfrzh5v/test_hsmtool_secret_decryption_1/lightning-1/ has memory leaks: [
E {
E "backtrace": [
E "ccan/ccan/tal/tal.c:437 (tal_alloc_)",
E "ccan/ccan/tal/tal.c:466 (tal_alloc_arr_)",
E "ccan/ccan/tal/tal.c:794 (tal_dup_)",
E "ccan/ccan/tal/str/str.c:32 (tal_strndup_)",
E "lightningd/options.c:1122 (add_config)",
E "lightningd/options.c:1282 (json_listconfigs)",
E "lightningd/jsonrpc.c:588 (command_exec)",
E "lightningd/jsonrpc.c:679 (rpc_command_hook_callback)",
E "lightningd/plugin_hook.c:123 (plugin_hook_call_)",
E "lightningd/jsonrpc.c:729 (plugin_hook_call_rpc_command)",
E "lightningd/jsonrpc.c:736 (call_rpc_command_hook)",
E "common/timeout.c:39 (timer_expired)",
E "lightningd/io_loop_with_timers.c:32 (io_loop_with_timers)",
E "lightningd/lightningd.c:871 (main)"
E ],
E "label": "lightningd/options.c:1122:char[]",
E "parents": [
E "lightningd/json_stream.c:49:struct json_stream",
E "ccan/ccan/io/io.c:91:struct io_conn",
E "lightningd/lightningd.c:104:struct lightningd"
E ],
E "value": "0x5569ada057a8"
E }
E ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We want to have a static Tor service created from a blob bound to
our node on cmdline
Changelog-added: persistent Tor address support
Changelog-added: allow the Tor inbound service port differ from 9735
Signed-off-by: Saibato <saibato.naga@pm.me>
Add base64 encode/decode to common
We need this to encode the blob for the tor service
Signed-off-by: Saibato <saibato.naga@pm.me>
cppcheck found this:
[lightningd/options.c:1137] -> [lightningd/options.c:1120] -> [lightningd/options.c:1193]: (error) Using pointer to local variable 'buf' that is out of scope.
Indeed, answer can point into buf, which is no longer in scope at the end.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were using sleeps to hope we catch the password prompt. This makes the test
flaky. So I added a help text followed by a `fflush` to make sure we catcht he
right moment, instead of guessing. The `fflush` is also useful for debugging
if a user ever pipes the output to a file it'd get buffered and the user would
wait forever. The same applies for automated systems such as `expect` or
`pexpect` based scripts that enter the password on prompt.
Do the same thing '--help' does with them; append `...`.
Valgrind noticed that we weren't NUL-terminarting if answer was over
78 characters.
Changelog-Fixed: JSONRPC: listconfigs appends '...' to truncated config options.
They're already qualified with network name, and there's little point
moving them; it might even be dangerous if multiple are running.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. "conf" can't be specified in a configuration file.
2. "lightning-dir" can't be specified in a configuration file unless the file
was explicitly set with --conf=.
3. "network" options can't be set in a per-network configuration file.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: .lightningd plugins and files moved into <network>/ subdir
Changelog-changed: WARNING: If you don't have a config file, you now may need to specify the network to lightning-cli
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This lets you have a default, but also a network-specific config.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Options: `config` and <network>/`config` read by default.
lightning-cli is going to need to know what network we're on, so
it will need to parse the config files. Move the code which does
the initial bootstrap parsing into common, as well as the config
file parsing core.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows finegrained logging control of particular subdaemons or
subsystems.
To do this, we defer setting the logging levels for each log object
until after early argument parsing (since e.g. "bitcoind" log object
is created early).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Options: log-level can now specify different levels for different subsystems.
--dev-force-tmp-channel-id flag takes a 64-character hex string
to use as the temporary channel id. Useful for spec tests
[ Fixed crash in non-DEVELOPER mode --RR ]
Changelog-None