Deprecated, but this can happen:
```
==1578== Conditional jump or move depends on uninitialised value(s)
==1578== at 0x12B30E: amount_msat_add (amount.c:224)
==1578== by 0x11270B: add_amount_sent (pay.c:1734)
==1578== by 0x112D89: listsendpays_done (pay.c:1831)
==1578== by 0x114F4B: handle_rpc_reply (libplugin.c:555)
==1578== by 0x115704: rpc_read_response_one (libplugin.c:685)
==1578== by 0x115821: rpc_conn_read_response (libplugin.c:705)
==1578== by 0x148E40: next_plan (io.c:59)
==1578== by 0x1499BD: do_plan (io.c:407)
==1578== by 0x1499FB: io_ready (io.c:417)
==1578== by 0x14BBC1: io_loop (poll.c:445)
==1578== by 0x117A82: plugin_main (libplugin.c:1322)
==1578== by 0x113ABC: main (pay.c:2096)
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #3926
(probably)
Changelog-Fixed: pay: Also limit the number of splits if the payee seems to have a low number of channels that can enter it, given the max-concurrent-htlcs limit.
The routehints paymod shares the storage of the array d->routehints and
p->invoice->routes, but once it operates, it possibly leaves it as a stale
pointer to memory it used to have.
Since other paymods may be interested in the invoice details, including
the routehints in the invoice, we should ensure the p->invoice->routes
remains valid whenever we try mutating that array.
As revealed by the failure of tests in #3936, where we ended up trying
to send a partial payment using legacy style, we are not handling
style properly.
1. BOLT9 has features, so we can *know* that the destination supports
MPP. We may not have seen a node_announcement.
2. We can't assume that nodes inside routehints support TLV.
3. We can't assume direct peers support TLV.
The keysend code tried to fix this up, so I'm not sure that this caused
the issue in #3968, though.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: `pay` will now make reliable multi-part payments to nodes it doesn't have a node_announcement for.
This will update the fee output if it exists, rather than unilaterally
adding a new one.
Also, if the fee output already exists, we should make sure that it
doesn't interfere with the outnums of the other outputs
Fixes: #2679
Changelog-Added: JSON-RPC: New `multiwithdraw` command to batch multiple onchain sends in a single transaction. Note it shuffles inputs and outputs, does not use BIP69.
Changelog-Added: We now have `multifundchannel` as a builtin plugin command to fund multiple channels to different peers all in a single onchain transaction.
Header from folded patch 'fixup-use-json_add_psbt.patch':
fixup!
Header from folded patch 'use-goto-no-ok-chain.patch':
fixup!
Header from folded patch 'destinations-at-parse-time.patch':
fixup!
Header from folded patch 'multifundchannel__use_jsmntoks_to_pass_through_json_string,_not_strings.patch':
multifundchannel: use jsmntoks to pass through json string, not strings
Passing in "" for utxos would crash lightningd on the command-line
otherwise. Now returns an error.
Header from folded patch 'update_plugins-multifundchannel.c.patch':
Update plugins/multifundchannel.c
Co-authored-by: Darosior <darosior@protonmail.com>
Changelog-Deprecated: plugin: `bcli` replacements should note that `sendrawtransaction` now has a second required Boolean argument, `allowhighfees`, which if `true`, means ignore any fee limits and just broadcast the transaction. Use `--deprecated-apis` to use older `bcli` replacement plugins that only support a single argument.
This removes the reservation cleanup at startup, too, now they're all
using 'reserved_til'.
This changes test_withdraw, since it asserted that outputs were marked
spent as soon as we broadcast a transaction: now they're reserved until
it's mined. Similarly, test_addfunds_from_block assumed we'd see funds
as soon as we broadcast the tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` now randomizes input and output order, not BIP69.
This is a little lazy, but simpler than extracting the common parts
or making withdraw a plugin which calls txprepare (which should be
deprecated soon in favor of fundpsbt etc).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some minor phrasing differences cause test changes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: txprepare reservations stay across restarts: use fundpsbt/reservepsbt/unreservepsbt
Changelog-Removed: txprepare `destination` `satoshi` argument form removed (deprecated v0.7.3)
This uses `fundpsbt` and similar to simulate the txprepare command.
It has one difference (when complete), in that it those reservations
are now timed and don't get reset on restart.
It also doesn't have the restriction that `all` can only be used with
no other output, as I didn't realize that when I implemented it!
Note that change is now inserted in a random position, not sorted
into BIP69 order.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids overwriting the ones in git, and generally makes things neater.
We have convenience headers wire/peer_wire.h and wire/onion_wire.h to
avoid most #ifdefs: simply include those.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were using `tal_fmt` to truncate off the last byte of the
response (newline), which required an allocation, a call to `vsnprintf` and a
copy of the block contents. This being >2MB in size on mainnet was rather
expensive.
We now just signal the end of the string by overwriting the trailing newline,
and stealing directly onto the result.
We create ALL_PROGRAMS, ALL_TEST_PROGRAMS, ALL_C_SOURCES and
ALL_C_HEADERS. Then the toplevel Makefile knows which are
autogenerated (by wildcard), so it can have all the rules to clean
them or check the source as necessary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Using `waitblockheight 0` is a very slightly faster query than `getinfo`.
Also, avoid querying blockheight for child payments (allow `waitblockheight`
paymod to provide the blockheight returned from the `waitblockheight`, and
just resample the starting blockheight from the parent).
Changelog-None: pointless micro-optimization
This was checked with `gcc -S -O2` to see how an optimized build
would compile the function.
The original code completed calls into each child (and the `.s`
file showed that GCC 9.x was not smart enough to do early-out).
This modification explicitly does early-out, and avoids call-return
stack overhead for the common case where a payment is an ancestor
of a long line of single-child payments due to retrying.
Changelog-None: pointless micro-optimization
This is the simplest possible fix: increase the target amount until we get
the desired number of parts, while still bucketizing payments together that
are in approximately the same size.
The current logic puts all payments that are in the range x < amount <= 16*x
in the same bucket, making them harder to distinguish.
Changelog-Fixed: pay: The `presplit` modifier now supports large payments without exhausting the available HTLCs.
We have sanity checks in there that it's a valid point. Simply store
the JSON token like we do with others.
time lightning-cli -R --network=regtest --lightning-dir /tmp/ltests-k8jhvtty/test_pay_stress_1/lightning-1/ listpays > /dev/null
Before:
real 0m2.054s
user 0m0.114s
sys 0m0.024s
After:
real 0m1.781s
user 0m0.127s
sys 0m0.013s
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
time lightning-cli -R --network=regtest --lightning-dir /tmp/ltests-k8jhvtty/test_pay_stress_1/lightning-1/ listpays > /dev/null
Before:
real 0m12.447s
user 0m0.143s
sys 0m0.008s
After:
real 0m2.054s
user 0m0.114s
sys 0m0.024s
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
memmem is also O(n^2), though it's faster. Now we have infrastructure,
let's do incremental parsing.
time lightning-cli -R --network=regtest --lightning-dir /tmp/ltests-k8jhvtty/test_pay_stress_1/lightning-1/ listpays > /dev/null
Before:
real 0m13.674s
user 0m0.131s
sys 0m0.024s
After:
real 0m12.447s
user 0m0.143s
sys 0m0.008s
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This doesn't make any difference, since lightningd generally sends us
short commands (command responses are via the rpc loop, which is
already done), but it's harmless.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The jsmn parser is a beautiful piece of code. In particular, you can parse
part of a string, then continue where you left off.
We don't take advantage of this, however, meaning for large JSON objects
we parse them multiple times before finally having enough to complete.
Expose the parser state and tokens through the API, so the caller can pass
them in repeatedly. For the moment, every caller is allocates each time
(except the unit tests).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to change the API on the more complete JSON parser, so
make and use a simple API for the easy cases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Antoine Poinsot
ZmnSCPxj jxPCSnmZ
niftynei
Christian Decker