It's just a sha256_double, but importantly when we convert it to a
string (in type_to_string, which is used in logging) we use
bitcoin_blkid_to_hex() so it's reversed as people expect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's just a sha256_double, but importantly when we convert it to a
string (in type_to_string, which is used in logging) we use
bitcoin_txid_to_hex() so it's reversed as people expect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When gossipd sends a message, have a gossip_index. When it gets back a
peer, the current gossip_index is included, so it can know exactly where
it's up to.
Most of this is mechanical plumbing through openingd, channeld and closingd,
even though openingd and closingd don't (currently) read gossip, so their
gossip_index will be unchanged.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The master now hands channeld either an error code, and channeld
generates the error message, or an error message relayed from another
node to pass through.
This doesn't fill in the channel_update yet: we need to wire up gossipd
to give us that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently lightningd does this, but channeld is perfectly capable of doing it.
channeld is also in a far better position to add channel_updates to it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We only send them when we're not awaiting revoke_and_ack: our
simplified handling can't deal with multiple in flights.
Closes: #244
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There is a race we see sometimes under valgrind on Travis which shows
gossipd receiving the node_announce from master before it reads the
channel_announce from channeld, and thus fails. The simplest solution
is to send the channel_announce and channel_update to master as well,
so it can ensure it sends them to gossipd in order
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were sending a channeld message to onchaind, which was v. confusing
due to overlap. We make all the numbers distinct, which means we can
also add an assert() that it's valid for that daemon, which catches
such errors immediately.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This change is really to allow us to have a --dev-fail-on-subdaemon-fail option
so we can handle failures from subdaemons generically.
It also neatens handling so we can have an explicit callback for "peer
did something wrong" (which matters if we want to close the channel in
that case).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is what it actually is, and makes it clearer when we refer to the
spec. It's the commitment we're currently updating, which is the next
commitment.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We keep the scriptpubkey to send until after a commitment_signed (or,
in the corner case, if there's no pending commitment). When we
receive a shutdown from the peer, we pass it up to the master.
It's up to the master not to add any more HTLCs, which works because
we move from CHANNELD_NORMAL to CHANNELD_SHUTTING_DOWN.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This matters in one case: channeld receiving a bad message is a
permenant failure, whereas losing a connection is transient.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need the old remote per_commitment_point so we can validate the
per_commitment_secret when we get it.
We unify this housekeeping in the master daemon using
update_per_commit_point().
This patch also saves whether remote funding is locked, and disallows
doing that twice (channeld should ignore it).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are two ways we can do retransmission on reconnect: re-derive
what we would have sent, or remember it and simply re-send. The
rederivation is difficult: unwinding state depends on whether we sent
a revoke_and_ack before or after the commitment_signed, and unwinding
a revoke_and_ack would require us to remember HTLCs we would have
normally forgotten at this point.
So we simply tell the master to remember the old signatures for us,
and hand them back in case we need to re-send.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In the case where we can't decrypt the onion, we can't fail it in the
normal way (which is encrypted using the onion shared secret), we need
to respond with a update_fail_malformed_htlc message.
Moreover, we need to remember this for persistence. This means that
we really have three conclusions for an HTLC: fulfilled, failed,
malformed. Fix up the logic everywhere which assumed failed or
fulfilled.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's easiest to have the master keep the last commit we sent, for
re-transmission. We could recalculate it, but it's made more difficult
by the before/after revoke case.
And because revoke_and_ack changes the channel state, we need to
remember which order we sent them in for re-transmission.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It needs to save them to the db in case of restart; this means we tell
it about funding_locked, as well as the next_per_commit_point given
in revoke_and_ack.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The channel daemon gets the shared secrets from the HSM to save
the master daemon some work. It used to hand these over at
revoke_and_ack receive, which is when the master daemon needs them.
However, it's a bit simpler to hand them over when we first tell
the master about the incoming HTLC (the first commitsig).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When adding their HTLCs, it needs all the information. When failing,
it needs the id as key and the failure reason. When fulfilling, it
needs the id and payment preimage.
It also needs to know when we have received an revoke_and_ack or a
commitment_signed, to place in the database.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We still get the shared secret, since that requires a round trip to the HSM
(why waste the master daemon's time?) but it does the processing, which
simplifies the message passing and things like realm handling which
have nothing to do with this particular channeld.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The format we use to generate marshal/unmarshal code is from
the spec's tools/extract-formats.py which includes the offset:
we don't use it at all, so rather than having manually-calculated
(and thus probably wrong) values, or 0, emit it altogther.
Reported-by: Christian Decker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use this to make it send the funding_signed message, rather than having
the master daemon do it (which was even more hacky). It also means it
can handle the crypto, so no need for the packet to be handed up encrypted,
and also make --dev-disconnect "just work" for this packet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. We explicitly assert what state we're coming from, to make transitions
clearer.
2. Every transition has a state, even between owners while waiting for HSM.
3. Explictly step though getting the HSM signature on the funding tx
before starting channeld, rather than doing it in parallel: makes
states clearer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather a big commit, but I couldn't figure out how to split it
nicely. It introduces a new message from the channel to the master
signaling that the channel has been announced, so that the master can
take care of announcing the node itself. A provisorial announcement is
created and passed to the HSM, which signs it and passes it back to
the master. Finally the master injects it into gossipd which will take
care of broadcasting it.
We alternated between using a sha256 and using a privkey, but there are
numerous places where we have a random 32 bytes which are neither.
This fixes many of them (plus, struct privkey is now defined in terms of
struct secret).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we now use the short_channel_id to identify the next hop we need
to resolve the channel_id to the pubkey of the next hop. This is done
by calling out to `gossipd` and stuffing the necessary information
into `htlc_end` and recovering it from there once we receive a reply.
Rusty Russell
Christian Decker