We could refine this later (based on existing wallet, for example), but
this gives some estimate.
[ Rename onchain_estimates -> onchain_fee_estimates Suggested-by: @SimonVrouwe ]
[ Factor of 1000 fix Reported-by: @SimonVrouwe ]
Suggested-by: @molxyz
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't know what our peer is doing, but if we see those values, maybe
they did too, and for longer. And add the min/max acceptable values
into our JSON API.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is useful mainly in the case where bitcoind is not giving estimates,
but can also be used to bias results if you want.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And no more filtering out messages, as we should no longer spam the
logs with them (the 'Connected json input' one was removed some time
ago).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Move the list to the start of `struct peer`: memleak walks the
list correctly this way.
2. Don't create tal parent loop daemon->conn->daemon.
The second one is silly anyway: we exit via master_gone when the master
conn is closed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to call out to subds for memleak detection, and the disabler
looks like a memleak if we're inside a callback.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
memleak can't see into htables, as it overloads unused pointer bits.
And it can't see into intmap, since they use malloc (it only looks for tal
pointers).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use feerate in several places, and each one really should react
differently when it's not available (such as when bitcoind is still
catching up):
1. For general fee-enforcement, we use the broadest possible limits.
2. For closingd, we use it as our opening negotiation point: just use half
the last tx feerate.
3. For onchaind, we can use the last tx feerate as a guide for our own txs;
it might be too high, but at least we know it was sufficient to be mined.
4. For withdraw and fund_channel, we can simply refuse.
Fixes: #1836
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Manipulate fees via fake-bitcoin-cli. It's not quite the same, as
these are pre-smoothing, so we need a restart to override that where
we really need an exact change. Or we can wait until it reaches a
certain value in cases we don't care about exact amounts.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Not just during startup: we could have bitcoind not give estimates until
later, but we don't want to smooth with zero.
The test changes in next patch trigger this, so I didn't write a test
with this patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't respond to fee changes until we're locked in: make sure we catch
up at that point.
Note that we use NORMAL fees during opening, but IMMEDIATE after, so
this often sends a fee update. The tests which break, we set those
feerates to be equal.
This (sometimes) changes the behavior of test_permfail, as we now
get an immediate commit, so that is fixed too so we always wait for
that to complete.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a noop if we're opening a new channel (channel_fees_can_change(channel)
is false until funding locked in), but important if we're restarting.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When in this state, we send a canned error "Awaiting unilateral close".
We enter this both when we drop to chain, and when we're trying to get
them to drop to chain due to option_data_loss_protect.
As this state (unlike channel errors) is saved to the database, it means
we will *never* talk to a peer again in this state, so they can't
confuse us.
Since we set this state in channel_fail_permanent() (which is the only
place we call drop_to_chain for a unilateral close), we don't need to
save to the db: channel_set_state() does that for us.
This state change has a subtle effect: we return WIRE_UNKNOWN_NEXT_PEER
instead of WIRE_TEMPORARY_CHANNEL_FAILURE as soon as we get a failure
with a peer. To provoke a temporary failure in test_pay_disconnect we
take the node offline.
Reported-by: Christian Decker @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we don't try to unilaterally close after a restart, *and*
we can tell onchaind to try to use the point to recover funds when the
peer unilaterally closes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For option_data_loss_protect, the peer can prove to us that it's ahead;
it gives us the (hopefully honest!) per_commitment_point it will use,
and we make sure we don't broadcast the commitment transaction we have.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We ignore incoming for now, but this means we advertize the option and
we send the required fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
peer features are only kept for connected peers (as they can change),
but we didn't update them on reconnect. The main effect was that
after a restart we displayed the features as empty, even after
reconnect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. l1 update_fee -> l2
2. l1 commitment_signed -> l2 (using new feerate)
3. l1 <- revoke_and_ack l2
4. l1 <- commitment_signed l2 (using new feerate)
5. l1 -> revoke_and_ack l2
When we break the connection after #3, the reconnection causes #4 to
be retransmitted, but it turns out l1 wasn't telling the master to set
the local feerate until it received the commitment_signed, so on
reconnect it uses the old feerate, with predictable results (bad
signature).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It introduces imprecision (took 1 satoshi off results in the coming
tests), and we have a helper for this already.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We only did this when we were first creating a wallet, or when we
asked for a relative rescan, not in the normal case!
Fixes: #1843
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Normal wallet txs get reconfirmed as blocks come in, but ones which need
closeinfo are more fragile, so we do it manually using txwatch for them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're about to use the txwatch facility for UTXOs, where there's no channel,
so allow that the be NULL, and hand the struct lightningd which callers
want anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was a very simple change and allowed us to remove the special
`json_opt_tok` macro.
Moved the callback out of `common/json.c` to `lightningd/json.c` because the new
callbacks are dependent on `struct command` etc.
(I already started on `json_tok_number`)
My plan is to:
1. upgrade json_tok_X one a time, maybe a PR for each one.
2. When done, rename macros (i.e, remove "_tal").
3. Remove all vestiges of the old callbacks
4. Add new callbacks so that we no longer need json_tok_tok!
(e.g., json_tok_label, json_tok_str, json_tok_msat)
Signed-off-by: Mark Beckwith <wythe@intrig.com>
Rusty Russell
Christian Decker
Mark Beckwith
Simon Vrouwe