Note that now we check capacity once we've figured out which peer, which
broke a test (we returned "unknown peer" instead of "capacity exceeded"),
so we rework that too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A CONSERVATIVE/3 target for them.
Some noisy changes to the tests as we had to update the estimatesmartfee
mock.
Changelog-Changed: We now use a higher feerate for resolving onchain HTLCs and for penalty transactions
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: JSON: `fundchannel` and `fundchannel_start` `satoshi` parameter removed (renamed to `amount` in 0.7.3).
Add new check if we're funder trying to add HTLC, keeping us
with enough extra funds to pay for another HTLC the peer might add.
We also need to adjust the spendable_msat calculation, and update
various tests which try to unbalance channels. We eliminate
the now-redundant test_channel_drainage entirely.
Changelog-Fixed: Corner case where channel could become unusable (https://github.com/lightningnetwork/lightning-rfc/issues/728)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
restrict fundchannel_cancel usage to only the opener side
Changelog-Changed: Only the opener of a fundchannel can cancel the channel open with fundchannel_cancel
it's that time of year (merry xmas!)
enables the ability to push_msat on fundchannel
Changelog-Added: RPC: `fundchannel` and `fundchannel_start` can now accept an optional parameter, `push_msat`, which will gift that amount of satoshis to the peer at channel open.
We still close the channel if we *send* an error, but we seem to have hit
another case where LND sends an error which seems transient, so this will
make a best-effort attempt to preserve our channel in that case.
Some test have to be modified, since they don't terminate as they did
previously :(
Changelog-Changed: quirks: We'll now reconnect and retry if we get an error on an established channel. This works around lnd sending error messages that may be non-fatal.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is an intermediary step: we still don't save it to the database,
but we do use the fee_states struct to track it internally.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The spec is (RSN!) going to explicitly denote where each feature should
be presented, so create that infrastructure.
Incorporate the new proposed bolt11 features, which need this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: .lightningd plugins and files moved into <network>/ subdir
Changelog-changed: WARNING: If you don't have a config file, you now may need to specify the network to lightning-cli
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rounds out the application of `upfront_shutdown_script`, allowing
an accepting node to specify a close_to address.
Prior to this, only the opening node could specify one.
Changelog-Added: Plugins: Allow the 'accepter' to specify an upfront_shutdown_script for a channel via a `close_to` field in the openchannel hook result
Spaces just make life a little harder for everyone.
(Plus, fix documentation: it's 'jsonrpc' not 'json' subsystem).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This simplifies our tests, too, since we don't need a magic option to
enable io logging in subdaemons.
Note that test_bad_onion still takes too long, due to a separate minor
bug, so that's marked and left dev-only for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Printed form is always "[<nodeid>-]<prefix>: <string>"
2. "jcon fd %i" becomes "jsonrpc #%i".
3. "jsonrpc" log is only used once, and is removed.
4. "database" log prefix is use for db accesses.
5. "lightningd(%i)" becomes simply "lightningd" without the pid.
6. The "lightningd_" prefix is stripped from subd log prefixes, and pid removed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Logging: formatting made uniform: [NODEID-]SUBSYSTEM: MESSAGE
Changelog-removed: `lightning_` prefixes removed from subdaemon names, including in listpeers `owner` field.
A log can have a default node_id, which can be overridden on a per-entry
basis. This changes the format of logging, so some tests need rework.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If a 'upfront_shutdown_script' was specified, show the address +
scriptpubky in `listpeers`
Changelog-added: JSON API: `listpeers` channels now include `close_to` and `close_to_addr` iff a `close_to` address was specified at channel open
Reduce test_feerate_stress iterations, and simply don't run
test_pay_retry under VALGRIND with SLOW_MACHINE at all.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A long time ago (93dcd5fed7), I
simplified the htlc reload code so it adjusted the amounts for HTLCs
in id order. As we presumably allowed them to be added in that order,
this avoided special-casing overflow (which was about to deliberately
be made harder by the new amount_msat code).
Unfortunately, htlc id order is not canonical, since htlc ids are
assigned consecutively in both directions! Concretely, we can have two HTLCs:
HTLC #0 LOCAL->REMOTE: 500,000,000 msat, state RCVD_REMOVE_REVOCATION
HTLC #0 REMOTE->LOCAL: 10,000 msat, state SENT_ADD_COMMIT
On a new remote-funded channel, in which we have 0 balance, these
commits *only* work in this order. Sorting by HTLC ID is not enough!
In fact, we'd have to worry about redemption order as well, as that
matters.
So, regretfully, we offset the balances halfway to UINT64_MAX, then check
they didn't underflow at the end. This loses us this one sanity check,
but that's probably OK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Feerate changes are asymmetric, as they can only be sent by the funder.
For FUNDER, the remote feerate is set when upon send of
commitment_signed, and the local feerate is set on receipt of
revoke_and_ack.
For non-funder, the local feerate is set on receipt of
commitment_signed, and the remote feerate set on send of
revoke_and_ack. In our code, these two happen together.
channeld gets this right, but lightningd ignored the funder/fundee
distinction, and as a result, receipt of a commitment_signed by the
funder altered fees in the database. If there was a reconnection
event or restart, then these (incorrect) values would be used, causing
us to complain about a 'Bad commit_sig signature' and close the
channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A 'Bad commit_sig signature' was reported by @Javier on Telegram and
@DarthCoin. This was between two c-lightning peers, so definitely our fault.
Analysis of this message revealed the signature was using the wrong
feerate. I finally managed to make a test case which triggered this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Check behavior for user supplied upfront_shutdown_script via close_to
Header from folded patch 'fix__return__not__iff_well_close_to_the_provided_addr.patch':
fix: return not iff we'll close to the provided addr
This is mainly an internal-only change, especially since we don't
offer any globalfeatures.
However, LND (as of next release) will offer global features, and also
expect option_static_remotekey to be a *global* feature. So we send
our (merged) feature bitset as both global and local in init, and fold
those bitsets together when we get an init msg.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It sometimes fail with a bad_gossip error because the sending node
might not have found out about the channel when it gets a
channel_update. Make sure the whole network knows everything before
we start.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since elements addresses look quite different from the bitcoin mainnet
addresses I just added a sample to the chainparams fixture. In addition I
extracted some of the fixed strings to reference chainparams instead.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
It only had an effect if the peer didn't support option_gossip_queries, but
still, we don't want a gossip blast any more.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The test was implicitly relying on us selecting the larger output and then not
touching the smaller, leaving it there for the final `withdraw` to claim. This
ordering of UTXOs is not guaranteed, and in particular can fail when switching
DB backends. To stabilize we just need to make sure to select the change
output as well.
It's generally clearer to have simple hardcoded numbers with an
#if DEVELOPER around it, than apparent variables which aren't, really.
Interestingly, our pruning test was always kinda broken: we have to pass
two cycles, since l2 will refresh the channel once to avoid pruning.
Do the more obvious thing, and cut the network in half and check that
l1 and l3 time out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
After switching to a plugin, we verify that we can fund a channel
before we check to contact a peer. We'll need to have a funded wallet
to pass the check in this test that verifies that 'fundchannel' cannot
be called for a peer after fundchannel_start is.
For now, we can't fully ensure that the broadcast was catched from a third pary. Only when the transaction (broadcast by a third pary) is onchain, we can catch it.
Rusty Russell
darosior
Christian Decker
Michael Schmoock
lisa neigut
trueptolemy