As a side-effect of using amount_msat in gossipd/routing.c, we explicitly
handle overflows and don't need to pre-prune ridiculous-fee channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used a u16, and a 1000 multiplier, which meant we wrapped at
riskfactor 66. We also never undid the multiplier, so we ended up
applying 1000x the riskfactor they specified.
This changes us to pass the riskfactor with a 1M multiplier. The next
patch changes the definition of riskfactor to be more useful.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a general rule, lightningd shouldn't parse user packets. We move the
parsing into gossipd, and have it respond only to permanent failures.
Note that we should *not* unconditionally remove a channel on
WIRE_INVALID_ONION_HMAC, as this can be triggered (and we do!) by
feeding sendpay a route with an incorrect pubkey.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently only used by gossipd for channel elimination.
Also print them in canonical form (/[01]), so tests need to be
changed.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
seed isn't very useful at this level: I've left it in routing.c
because it might be useful for detailed testing. Pretty sure it's unused,
so I simply removed it.
The fuzzpercent is documented to default at 5%, but actually was 75%.
Fix that too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids some very ugly switch() statements which mixed the two,
but we also take the chance to rename 'towire_gossip_' to
'towire_gossipd_' for those inter-daemon messages; they're messages to
gossipd, not gossip messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Have c-lightning nodes send out the largest value for
`htlc_maximum_msat` that makes sense, ie the lesser of
the peer's max_inflight_htlc value or the total channel
capacity minus the total channel reserve.
We initialize it to 30 seconds, but it's *always* overridden by the
gossip_init message (and usually to 60 seconds, so it's doubly
misleading).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Gossipd provided a generic "get endpoints of this scid" and we only
use it in one place: to look up htlc forwards. But lightningd just
assumed that one would be us.
Instead, provide a simpler API which only returns the peer node
if any, and now we handle it much more gracefully.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For routeboost, we want to select from all our enabled channels with
sufficient incoming capacity. Gossipd knows which are enabled (ie. we
have received a `channel_update` from the peer), but doesn't know the
current incoming capacity.
So we get gossipd to give us all the candidates, and lightningd
selects from those.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We would never complete further ping commands if we had < responses
than pings. Oops.
Fixes: #1928
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were adding channels without their capacity, and eventually annotated them
when we exchanged `channel_update`s. This worked as long as we weren't
considering the channel capacity, but would result in local-only channels to be
unusable once we start checking.
This patch guts gossipd of all peer-related functionality, and hands
all the peer-related requests to channeld instead.
gossipd now gets the final announcable addresses in its init msg, since
it doesn't handle socket binding any more.
lightningd now actually starts connectd, and activates it. The init
messages for both gossipd and connectd still contain redundant fields
which need cleaning up.
There are shims to handle the fact that connectd's wire messages are
still (mostly) gossipd messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
json_listpeers returns an array of peers, and an array of nodes: the latter
is a subset of the former, and is used for printing alias/color information.
This changes it so there is a 1:1 correspondance between the peer information
and nodes, meaning no more O(n^2) search.
If there is no node_announce for a peer, we use a negative timestamp
(already used to indicate that the rest of the gossip_getnodes_entry
is not valid).
Other fixes:
1. Use get_node instead of iterating through the node map.
2. A node without addresses is perfectly valid: we have to use the timestamp
to see if the alias/color are set. Previously we wouldn't print that
if it didn't also advertize an address.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we currently only (ab)use it to send everything, we need a way to
generate boutique queries for testing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're telling gossipd about disconnections anyway, so let's just use that signal
to disable both sides of the channel.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This was failing some of our integration tests, i.e., the ones closing a channel
and not waiting for sigexchange. The remote node would often not be quick enough
to send us its disabling channel_update, and hence we'd still remember the
incoming direction. That could then be sent out as part of an invoice, and fail
subsequently. So just set both directions to be disabled and let the onchain
spend clean up once it happens.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This resolves the problem where both channeld and gossipd can generate
updates, and they can have the same timestamp. gossipd is always able
to generate them, so can ensure timestamp moves forward.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note: this will break the gossip_store if they have current channels,
but it will fail to parse and be discarded.
Have local_add_channel do just that: the update is logically separate
and can be sent separately.
This removes the ugly 'bool add_to_store' flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This takes the Tor service address in the same option, rather than using
a separate one. Gossipd now digests this like any other type.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For the moment, this is a straight handing of current parameters through
from master to the gossip daemon. Next we'll change that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rename tor_proxyaddrs and tor_serviceaddrs to tor_proxyaddr and tor_serviceaddr:
the 's' at the end suggests that there can be more than one.
Make them NULL or non-NULL, rather than using all-zero if unset.
Hand them the same way to gossipd; it's a bit of a hack since we don't
have optional fields, so we use a counter which is always 0 or 1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a rebased and combined patch for Tor support. It is extensively
reworked in the following patches, but the basis remains Saibato's work,
so it seemed fairest to begin with this.
Minor changes:
1. Use --announce-addr instead of --tor-external.
2. I also reverted some whitespace and unrelated changes from the patch.
3. Removed unnecessary ';' after } in functions.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Someone could try to announce an internal address, and we might probe
it.
This breaks tests, so we add '--dev-allow-localhost' for our tests, so
we don't eliminate that one. Of course, now we need to skip some more
tests in non-developer mode.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we're given a wildcard address, we can't announce it like that: we need
to try to turn it into a real address (using guess_address). Then we
use that address. As a side-effect of this cleanup, we only announce
*any* '--addr' if it's routable.
This fix means that our tests have to force '--announce-addr' because
otherwise localhost isn't routable.
This means that gossipd really controls the addresses now, and breaks
them into two arrays: what we bind to, and what we announce. That is
now what we return to the master for json_getinfo(), which prints them
as 'bindings' and 'addresses' respectively.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Add special option where an empty host means 'wildcard for IPv4 and/or IPv6'
which means ':1234' can be used to set only the portnum.
2. Only add this protocol wildcard if --autolisten=1 (default)
and no other addresses specified.
3. Pass it down to gossipd, so it can handle errors correctly: in most cases,
it's fatal not to be able to bind to a port, but for this case, it's OK
if we can only bind to one of IPv4/v6 (fatal iff neither).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This replacement is a little menial, but it explicitly catches all
the places where we allow a local socket. The actual implementation of
opening a AF_UNIX socket is almost hidden in the patch.
The detection of "valid address" is now more complex:
p->addr.itype != ADDR_INTERNAL_WIREADDR || p->addr.u.wireaddr.type != ADDR_TYPE_PADDING
But most places we do this, we should audit: I'm pretty sure we can't
get an invalid address any more from gossipd (they may be in db, but
we should fix that too).
Closes: #1323
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It does all the other address handling, do this too. It also proves useful
as we clean up wildcard address handling.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's become clear that our network options are insufficient, with the coming
addition of Tor and unix domain support.
Currently:
1. We always bind to local IPv4 and IPv6 sockets, unless --port=0, --offline,
or any address is specified explicitly. If they're routable, we announce.
2. --addr is used to announce, but not to control binding.
After this change:
1. --port is deprecated.
2. --addr controls what we bind to and announce.
3. --bind-addr/--announce-addr can be used to control one and not the other.
4. Unless --autolisten=0, we add local IPv4 & IPv6 port 9735 (and announce if they are routable).
5. --offline still overrides listening (though announcing is still the same).
This means we can bind to as many ports/interfaces as we want, and for
special effects we can announce different things (eg. we're sitting
behind a port forward or a proxy).
What remains to implement is semi-automatic binding: we should be able
to say '--addr=0.0.0.0:9999' and have the address resolve at bind
time, or even '--addr=0.0.0.0:0' and have the port autoresolve too
(you could determine what it was from 'lightning-cli getinfo'.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We set no_reconnect with --offline, but that doesn't work if !DEVELOPER.
Make the flag positive, and non-DEVELOPER mode for gossipd.
We also don't override portnum with --offline, but have an explicit
'listen' flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means gossipd is live and we can tell it things, but it won't
receive incoming connections. The split also means that the main daemon
continues (eg. loading peers from db) while gossipd is loading from the store,
potentially speeding startup.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently we intuit it from the fd being closed, but that may happen out
of order with when the master thinks it's dead.
So now if the gossip fd closes we just ignore it, and we'll get a
notification from the master when the peer is disconnected.
The notification is slightly ugly in that we have to disable it for
a channel when we manually hand the channel back to gossipd.
Note: as stands, this is racy with reconnects. See the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This was sitting in my gossip-enchancement patch queue, but it simplifies
this set too, so I moved it here).
In 94711969f we added an explicit gossip_index so when gossipd gets
peers back from other daemons, it knows what gossip it has sent (since
gossipd can send gossip after the other daemon is already complete).
This solution is insufficient for the more general case where gossipd
wants to send other messages reliably, so replace it with the other
solution: have gossipd drain the "gossip fd" which the daemon returns.
This turns out to be quite simple, and is probably how I should have
done it originally :(
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Lifetime of 'struct reaching' now only while we're actively doing connect.
2. Always free after a single attempt: if it's an important peer, retry
on a timer.
3. Have a single response message to master, rather than relying on
peer_connected on success and other msgs on failure.
4. If we are actively connecting and we get another command for the same
id, just increment the counter
The result is much simpler in the master daemon, and much nicer for
reconnection: if they say to connect they get an immediate response,
rather than waiting for 10 retries. Even if it's an important peer,
it fires off another reconnect attempt, unless it's actively
connecting now.
This removes exponential backoff: that's restored in next patch. It
also doesn't handle multiple addresses for a single peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And on channel_fail_permanent and closing (the two places we drop to
chain), we tell gossipd it's no longer important.
Fixes: #1316
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
lisa neigut
Christian Decker
Saibato