BackgroundL Each log has a log_book: many logs can share the same one,
as each one can have a separate prefix.
Testing tickled a bug at the end of this series, where subd was
logging to the peer's log_book on shutdown, but the peer was already
freed. We've already had issues with logging while lightningd is
shutting down.
There are times when reference counting really is the right answer,
this seems to be one of them: the 'struct log' share the 'struct
log_book' and the last 'struct log' cleans it up.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we create new entries from wallet_channel_insert(), there's no
need for the branches. And indeed, many wallet functions can be
static.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We derive the seed from this, so it needs to be unique, but using
rowid forced us to put the channel into the db early, before it
was ready.
Instead, use a counter to ensure uniqueness, initialized when we load
existing peers. This doesn't need to touch the database at all.
As we now have only two places where the channel is committed (the
funder and fundee paths), so we create a new explicit
'wallet_channel_insert()' function: 'wallet_channel_save()' now just
updates.
Note that this also fixes some weirdness in
wallet_channels_load_active: we strangely avoided loading channels in
CLOSINGD_COMPLETE (which fortunately was a transient state, so
unlikely anyone hit this). Note that since the lines above already
delete all the OPENINGD channels, we now simply load them all.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Adds a simple check that compares genesis-blockhashes from the
chainparams against the blockhash that the wallet was created
with. The wallet is network specific, so mixing is always a bad idea.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
ZmnSCPxj queried the unilateral close case, so make that clearer.
Christian raise concerns about existing channels, so make it clear
what we're doing there too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We only need to do that if it's possible there's something to find:
either we have an unspent output from a unilateral close, or we've
ever handed out an address.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
With fallback depending on chainparams: this means the first upgrade
will be slow, but after that it'll be fast.
Fixes: #990
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We usually did this, but sometimes they were named after what they did,
rather than what they cleaned up.
There are still a few exceptions:
1. I didn't bother creating destroy_xxx wrappers for htable routines
which already existed.
2. Sometimes destructors really are used for side-effects (eg. to simply
mark that something was freed): these are clearer with boutique names.
3. Generally destructors are static, but they don't need to be: in some
cases we attach a destructor then remove it later, or only attach
to *some* cases. These are best with qualifiers in the destroy_<type>
name.
Suggested-by: @ZmnSCPxj
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This provides a sanity check that we are in sync, and also keeps the
logic in the program and out of the SQL.
Since the destructor now doesn't clean up the peer, there are some
wider changes to be made when cleaning up. Most notably we create
lots of channels in run-wallet.c and they previously freed the peer:
now we need free the peer explicitly, so we need to free them first.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Much like the database; peer contains id, address, channel contains
per-channel information. Where we create a channel, we always create
the peer too.
For the moment, peer->log and channel->log coexist side-by-side, to
reduce some of the churn.
Note that this changes the API to dev-forget-channel: if we have more
than one channel, we insist they specify the short-channel-id.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Both when we forget about an opening peer, and at startup. We're
going to be relying on this, and the next patch, as we refactor
peer/channel handling to mirror the db.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This caused a bit of confusion for our testers, when funding a channel
the funds are no longer available and listed in `lisfunds`, causing
them to believe funds to have disappeared. This PR adds funds that are
allocated to channels in the `listfunds` output, together with some
info about the channel, to make sure this doesn't happen again.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These are now logically arrays of pointers. This is much more natural,
and gets rid of the horrible utxo array converters.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Still writing the channel since some of the channel setup parameters
depends on `chan->id` to be set. If we later set the `chan->id`
signatures fail. This prevents OPENINGD channels showing up after
restarting.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We were sideloading it, which is awkward, now it's a field that we can
actually use in the code.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
If needed, they should be directly #included; otherwise the following
patches really mess things up.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* Add optional addresstype param to newaddr, which can be one of:
- bech32
- p2sh-segwit
- nothing (defaults to p2sh-segwit)
The naming here mirrors bitcoind
* txfilter already looks for p2wpkh outputs, so we're covered there
Signed-off-by: William Casarin <jb55@jb55.com>
This was removed because withdraw-to-self results in more than the
change being sent to us.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Maintaining it was always fraught, since the command could go away
if the JSON RPC died. Most recently, it was broken again on shutdown
(see below).
In future we may allow pay commands to block on previous payments, so
it won't even be a 1:1 mapping. Generalize it: keep commands in a
simple list and do a lookup when a payment fails/succeeds.
Valgrind error file: valgrind-errors.5732
==5732== Invalid read of size 8
==5732== at 0x4149FD: remove_cmd_from_hout (pay.c:292)
==5732== by 0x468BAB: notify (tal.c:237)
==5732== by 0x469077: del_tree (tal.c:400)
==5732== by 0x4690C7: del_tree (tal.c:410)
==5732== by 0x46948A: tal_free (tal.c:509)
==5732== by 0x40F1EA: main (lightningd.c:362)
==5732== Address 0x69df148 is 1,512 bytes inside a block of size 1,544 free'd
==5732== at 0x4C2EDEB: free (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==5732== by 0x469150: del_tree (tal.c:421)
==5732== by 0x46948A: tal_free (tal.c:509)
==5732== by 0x4198F2: free_htlcs (peer_control.c:1281)
==5732== by 0x40EBA9: shutdown_subdaemons (lightningd.c:209)
==5732== by 0x40F1DE: main (lightningd.c:360)
==5732== Block was alloc'd at
==5732== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==5732== by 0x468C30: allocate (tal.c:250)
==5732== by 0x4691F7: tal_alloc_ (tal.c:448)
==5732== by 0x40A279: new_htlc_out (htlc_end.c:143)
==5732== by 0x41FD64: send_htlc_out (peer_htlcs.c:397)
==5732== by 0x41511C: send_payment (pay.c:388)
==5732== by 0x41589E: json_sendpay (pay.c:513)
==5732== by 0x40D9B1: parse_request (jsonrpc.c:600)
==5732== by 0x40DCAC: read_json (jsonrpc.c:667)
==5732== by 0x45C706: next_plan (io.c:59)
==5732== by 0x45D1DD: do_plan (io.c:387)
==5732== by 0x45D21B: io_ready (io.c:397)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We move it into jsonrpc where it belongs, and make it fail the command.
This means it can tell us exactly what was wrong.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
So many channels stuck in channeld_awaiting_lockin, and I don't like
suggesting manually editing the DB, so this adds a very simple way to
sync with bitcoind's UTXO view. `dev` since it is dangerous, then
again if bitcoind says those funds aren't available there's little we
can do anyway.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The previous tests didn't make sense anyway, but I think they were trying
to exclude onchain channels.
We delete completely forgotten channels anyway now, so we don't need
such testing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
luca vaccaro
Christian Decker
practicalswift
William Casarin
ZmnSCPxj
rvandermeer