I run with ulimit -c unlimited, and valgrind leaves core files like
valgrind-errors.22114.core.22114 which test_lightning.py tries to
parse as log files.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It crashes under valgrind, causing a valgrind error: valgrind gives us a
backtrace anyway, so we don't need it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
"near \"AND\": syntax error"
This was caught by the "always keep errors for db_commit_transaction".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to need this, and the PRINTF_FMT(1,2) in front of it caused
mockup.sh to miss the declaration.
We also eliminate the obviously-unused fallback case (which referred
to daemon/*.h).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Normally, we get an error as soon as we send WIRE_REVOKE_AND_ACK. But if the
commit timer goes off, we get some extra cycles, during which the other side
can reconnect. In this case, we simply kill the channeld before it fails,
and never check for the permfail string.
b'lightning_channeld(18613): TRACE: dev_disconnect: -WIRE_REVOKE_AND_ACK'
b'lightning_channeld(18613): TRACE: Trying commit'
b'lightning_channeld(18613): TRACE: htlc 0: SENT_ADD_REVOCATION->SENT_ADD_ACK_COMMIT'
b'lightning_channeld(18613): TRACE: htlc added REMOTE: local +0 remote -200000000'
b'lightning_channeld(18613): TRACE: sending_commit: HTLC REMOTE 0 = SENT_ADD_ACK_COMMIT/RCVD_ADD_ACK_COMMIT'
b'lightning_gossipd(18590): TRACE: Responder: Act 1'
b'lightning_channeld(18613): TRACE: Derived key 034aab0b5cb755de836cffb34c053ba115fba6fe75414e8f56261e23c80eabb1fe from basepoint 03e0a7bb422b254f54bc954be05bd6823a7b7a4b996ff8d3079ca211590fb5df39, point 02f3bf525b6ca595bf85d63e89c95fc59c0fde3ae434b55c8093bbb5c64849da37'
b'lightningd(18465): Connected json input'
b'lightningd(18465):jcon fd 16: Success'
b'lightningd(18465):jcon fd 16: Closing (Bad file descriptor)'
b'lightning_gossipd(18590): TRACE: Responder: Act 2'
b'lightning_gossipd(18590): TRACE: Responder: Act 3'
b'lightning_gossipd(18590): UPDATE WIRE_GOSSIP_PEER_CONNECTED'
b'lightning_gossipd(18590): UPDATE WIRE_GOSSIP_PEER_CONNECTED'
b'lightningd(18465): peer 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518: Peer has reconnected, state CHANNELD_NORMAL'
b'lightning_channeld(18613): Status closed, but not exited. Killing'
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And we report these through the getpeers JSON RPC again (carefully: in
our reconnect tests we can get duplicates which this patch now filters
out).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In future it will have TOR support, so the name will be awkward.
We collect the to/fromwire functions in common/wireaddr.c, and the
parsing functions in lightningd/netaddress.c.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to derive this from the fd when they connect in, but we already
know it if we're connecting out.
We want this so we can tell (in next few patches) master the peer's address.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
954a3990fa had two errors:
1) We created the handoff message *before* we sent the final packet, meaning
that the cryptostate was out-of-sync.
2) We called io_wait() on the output side of a duplex connection: it has
to be io_wait_out().
This time, stress testing for 2 hours revealed no more problems.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They don't currently, since callers check, but be safe. In addition,
handle NULL returns from these in the bitcoind code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are others, but they really are casued by bad failure. We need a
parachute system for these.
Closes: #176
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a bit messier than I'd like, but we want to clearly remove all
dev code (not just have it uncalled), so we remove fields and functions
altogether rather than stub them out. This means we put #ifdefs in callers
in some places, but at least it's explicit.
We still run tests, but only a subset, and we run with NO_VALGRIND under
Travis to avoid increasing test times too much.
See-also: #176
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In this case, it was a gossip message half-sent, when we asked the peer
to be released. Fix the problem in general by making send_peer_with_fds()
wait until after the next packet.
test_routing_gossip/lightning-4/log:
b'lightning_openingd(8738): TRACE: First per_commit_point = 02e2ff759ed70c71f154695eade1983664a72546ebc552861f844bff5ea5b933bf'
b'lightning_openingd(8738): TRACE: Failed hdr decrypt with rn=11'
b'lightning_openingd(8738): STATUS_FAIL_PEER_IO: Reading accept_channel: Success'
test_routing_gossip/lightning-5/log:
b'lightning_gossipd(8461): UPDATE WIRE_GOSSIP_PEER_NONGOSSIP'
b'lightning_gossipd(8461): UPDATE WIRE_GOSSIP_PEER_NONGOSSIP'
b'lightningd(8308): Failed to get netaddr for outgoing: Transport endpoint is not connected'
The problem occurs here on release, but could be on any place where we hand
a peer over when using ccan/io. Note the other case (channel.c).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For message read, we do it as header then body, so we can have
io_plan_in_started(conn) false, but we're between header and body.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
test_routing_gossip (__main__.LightningDTests) ... lightningd: Outstanding taken pointers: lightningd/peer_control.c:2352:towire_errorfmt(ld, ((void *)0), "Can't resolve your address")
This caused by the other end closing due to the next bug.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There is a race we see sometimes under valgrind on Travis which shows
gossipd receiving the node_announce from master before it reads the
channel_announce from channeld, and thus fails. The simplest solution
is to send the channel_announce and channel_update to master as well,
so it can ensure it sends them to gossipd in order
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It makes it impossible to embed an ipaddr in another structure, since we
always try to skip over any zeroes, which may swallow a following field.
Do the skip specially for the case where we're parsing routing messages:
we never use padding for our own internal messages anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Makes it easier to compare before/after failures. Ideally, we should
run under Travis both with this option and with the seed based on the
entire tmp path (which is still reproducible with determination, but
not fixed every run like this is).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are now only two kinds of subdaemons: global ones (hsmd, gossipd) and
per-peer ones. We can handle many callbacks internally now.
We can have a handler to set a new peer owner, and automatically do
the cleanup of the old one if necessary, since we now know which ones
are per-peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently rely on a zero exit status. That's the only difference between
onchain finished handling and other per-peer daemons, so instead we should
have an explicit "done" message. This is both clearer, and allows us to
unify.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now the flow is much simpler from a lightningd POV:
1. If we want to connect to a peer, just send gossipd `gossipctl_reach_peer`.
2. Every new peer, gossipd hands up to lightningd, with global/local features
and the peer fd and a gossip fd using `gossip_peer_connected`
3. If lightningd doesn't want it, it just hands the peerfd and global/local
features back to gossipd using `gossipctl_handle_peer`
4. If a peer sends a non-gossip msg (eg `open_channel`) the gossipd sends
it up using `gossip_peer_nongossip`.
5. If lightningd wants to fund a channel, it simply calls `release_channel`.
Notes:
* There's no more "unique_id": we use the peer id.
* For the moment, we don't ask gossipd when we're told to list peers, so
connected peers without a channel don't appear in the JSON getpeers API.
* We add a `gossipctl_peer_addrhint` for the moment, so you can connect to
a specific ip/port, but using other sources is a TODO.
* We now (correctly) only give up on reaching a peer after we exchange init
messages, which changes the test_disconnect case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell