Note that it's channeld which calculates the shared secret, too. This
minimizes the work that lightningd has to do, at cost of passing this
through.
We also don't yet save the blinding field(s) to the database.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Sending update_fee immediately after channel establishment seems to
upset LND, so work around it by deferring it. The reason we increase
the fee after establishment is because now we might need to close the
channel in a hurry due to htlcs, but until there are htlcs that's
unnecessary.
Fixes: #3596
Changelog-Changed: Added workaround for lnd rejecting our commitment_signed when we send an update_fee after channel confirmed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't free the signatures in this case, and for some reason leak checking
on my build machine just found it:
MEMLEAK: 0x560f7dc69fc8'
label=channeld/gen_channel_wire.c:266:secp256k1_ecdsa_signature'
backtrace:'
ccan/ccan/tal/tal.c:442 (tal_alloc_)'
channeld/gen_channel_wire.c:266 (fromwire_channel_init)'
channeld/channeld.c:3060 (init_channel)'
channeld/channeld.c:3254 (main)'
parents:'
channeld/channeld.c:3227:struct peer'
MEMLEAK: 0x560f7dc6a288'
label=channeld/gen_channel_wire.c:272:secp256k1_ecdsa_signature'
backtrace:'
ccan/ccan/tal/tal.c:442 (tal_alloc_)'
channeld/gen_channel_wire.c:272 (fromwire_channel_init)'
channeld/channeld.c:3060 (init_channel)'
channeld/channeld.c:3254 (main)'
parents:'
channeld/channeld.c:3227:struct peer'
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
common/onion is going to need to use this for the case where it finds a blinding
seed inside the TLV. But how it does ecdh is daemon-specific.
We already had this problem for devtools/gossipwith, which supplied a
special hsm_do_ecdh(). This just makes it more general.
So we create a generic ecdh() interface, with a specific implementation
which subdaemons and lightningd can use.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently abuse the added_htlc and failed_htlc messages to tell channeld
about existing htlcs when it restarts. It's clearer to have an explicit
'existing_htlc' type which contains all the information for this case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's almost always "their_features" and "our_features" respectively, so
make those names clear.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out that unnecessary: all callers can access the feature_set,
so make it much more like a normal primitive.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
At the moment, we store e.g. WIRE_TEMPORARY_CHANNEL_FAILURE, and then
lightningd has a large demux function which turns that into the correct
error message.
Such an enum demuxer is an anti-pattern.
Instead, store the message directly for output HTLCs; channeld now
sends us an error message rather than an error code.
For input HTLCs we will still need the failure code if the onion was
bad (since we need to prompt channeld to send a completely different
message than normal), though we can (and will!) eliminate its use in
non-BADONION failure cases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We'll use this in the next patch for when we need to create errors to
send back to lightningd; most commonly when the channel doesn't have
capacity for the HTLC.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of making it ourselves, lightningd does it. Now we only have
two cases of failed htlcs: completely malformed (BADONION), and with
an already-wrapped onion reply to send.
This makes channeld's job much simpler.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For incoming htlcs, we need failure details in case we need to
re-xmit them. But for outgoing htlcs, lightningd is telling us it
already knows they've failed, so we just need to flag them failed
and don't need the details.
Internally, we set the ->fail to a dummy non-NULL value; this is
cleaned up next.
This matters for the next patch, which moves onion handling into
lightningd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We could use sendonion to do this, but it actually takes a different path through
pay, and I wanted to test all of it, so I made a new dev flag.
We currently get upset with the response:
lightningd/pay.c:556: payment_failed: Assertion `!hout->failcode' failed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These messages may be exchanged between the master and any daemon. For now
these are just the daemons that a peer may be attached to at any time since
the first example of this is the custommsg infrastructure.
Generally I prefer structures over u8, since the size is enforced at
runtime; and in several places we were doing conversions as the code
using Sphinx does treat struct secret as type of the secret.
Note that passing an array is the same as passing the address, so
changing from 'u8 secret[32]' to 'struct secret secret' means various
'secret' parameters change to '&secret'. Technically, '&secret' also
would have worked before, since '&' is a noop on array, but that's
always seemed a bit weird.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes it clear we're dealing with a message which is a wrapped error
reply (needing unwrap_onionreply), not an already-wrapped one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We still close the channel if we *send* an error, but we seem to have hit
another case where LND sends an error which seems transient, so this will
make a best-effort attempt to preserve our channel in that case.
Some test have to be modified, since they don't terminate as they did
previously :(
Changelog-Changed: quirks: We'll now reconnect and retry if we get an error on an established channel. This works around lnd sending error messages that may be non-fatal.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Thanks to @t-bast, who made this possible by interop testing with Eclair!
Changelog-Added: Protocol: can now send and receive TLV-style onion messages.
Changelog-Added: Protocol: can now send and receive BOLT11 payment_secrets.
Changelog-Added: Protocol: can now receive basic multi-part payments.
Changelog-Added: RPC: low-level commands sendpay and waitsendpay can now be used to manually send multi-part payments.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the final step: we pass the complete fee_states to and from
channeld.
Changelog-Fixed: "Bad commitment signature" closing channels when we sent back-to-back update_fee messages across multiple reconnects.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These used to be necessary as we could have feerate changes which
we couldn't track: now we do, we don't need these flags.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The `channel_got_commitsig` we send the lightningd also implies we sent
the revoke_and_ack, as an optimization. It doesn't currently matter,
since channel_sending_revoke_and_ack doesn't do anything important to the
state, but that changes once we start uploading the entire fee_states.
So now we move our state machine *before* sending to lightningd, in
preparation for sending fee_states too.
Unfortunately, we need to marshall the info to send before we
increment the state, as lightningd expects that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Also pulls in a new onion error (mpp_timeout). We change our
route_step_decode_end() to always return the total_msat and optional
secret.
We check total_amount (to prohibit mpp), but we do nothing with
secret for now other than hand it to the htlc_accepted hook.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Check behavior for user supplied upfront_shutdown_script via close_to
Header from folded patch 'fix__return__not__iff_well_close_to_the_provided_addr.patch':
fix: return not iff we'll close to the provided addr
I had a report of a 0.7.2 user whose node hadn't appeared on 1ml. Their
node_announcement wasn't visible to my node, either.
I suspect this is a consequence of recent version reducing the amount of
gossip they send, as well as large nodes increasingly turning off gossip
altogether from some peers (as we do). We should ignore timestamp filters
for our own channels: the easiest way to do this is to push them out
directly from gossipd (other messages are sent via the store).
We change channeld to wrap the local channel_announcements: previously
we just handed it to gossipd as for any other gossip message we received
from our peer. Now gossipd knows to push it out, as it's local.
This interferes with the logic in tests/test_misc.py::test_htlc_send_timeout
which expects the node_announcement message last, so we generalize
that too.
[ Thanks to @trueptolmy for bugfix! ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is mainly an internal-only change, especially since we don't
offer any globalfeatures.
However, LND (as of next release) will offer global features, and also
expect option_static_remotekey to be a *global* feature. So we send
our (merged) feature bitset as both global and local in init, and fold
those bitsets together when we get an init msg.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Command format: close id [unilateraltimeout] [destination]
Close the channel with peer {id}, forcing a unilateral
close after {unilateraltimeout} seconds if non-zero, and
the to-local output will be sent to {destination}. If
{destination} isn't specified, the default is the address
of lightningd.
Also change the pylightning:
update the `close` API to support `destination` parameter
WIRE_REQUIRED_CHANNEL_FEATURE_MISSING anticipates a glorious Wumbo future,
and is closer to correct (it's a PERM failure).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now have a pointer to chainparams, that fails valgrind if we do anything
chain-specific before setting it.
Suggested-by: Rusty Russell <@rustyrussell>
It's generally clearer to have simple hardcoded numbers with an
#if DEVELOPER around it, than apparent variables which aren't, really.
Interestingly, our pruning test was always kinda broken: we have to pass
two cycles, since l2 will refresh the channel once to avoid pruning.
Do the more obvious thing, and cut the network in half and check that
l1 and l3 time out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Dr. Maxim Orlovsky
lisa neigut
Ken Sedgwick
Christian Decker
Vasil Dimov
trueptolemy