Since we now over-write the wally malloc/free functions, we need to do
so for tests as well. Here we pull up all of the common setup/teardown
logic into a separate place, and update the tests that use libwally to
use the new common_setup core
Changelog-None
Previously we were annotating every movement with the blockheight of
lightningd at notification time. Which is lossy in terms of info, and
won't be helpful for reorg reconciliation. Here we switch over to
logging chain moves iff they've been confirmed.
Next PR will fix this up for withdrawals, which are currently tagged
with a blockheight of zero, since we log on successful send.
On node start we replay onchaind's transactions from the database/from
our loaded htlc table. To keep things tidy, we shouldn't notify the
ledger about these, so we wrap pretty much everything in a flag that
tells us whether or not this is a replay.
There's a very small corner case where dust transactions will get missed
if the node crashes after the htlc has been added to the database but
before we've successfully notified onchaind about it.
Notably, most of the obtrusive updates to onchaind wrappings are due to
the fact that we record dust (ignored outputs) before we receive
confirmation of its confirmation.
HTLCs trigger a coin movement only when their final form (state) is
reached. This prevents us from needing to concern ourselves with
retries, as well as being the absolutely most correct in terms of
answering the question 'when has the money irrevocably changed hands'.
All coin movements should pass this bar, for ultimate accounting
correctness
The current plan for coin movements involves tagging
origination/destination htlc's with a separate tag from 'routed' htlcs
(which pass through our node). In order to do this, we need a persistent flag on
incoming htlcs as to whether or not we are the final destination.
I noticed the following in logs for tests/test_connection.py::test_feerate_stress:
```
DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Failing HTLC 18446744073709551615 due to peer death
DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: local_routing_failure: 8194 (WIRE_TEMPORARY_NODE_FAILURE)
```
This is because it reports the (transient) node_failure error, because
our channel_failure message is incomplete. Fix this wart up.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously we've used the term 'funder' to refer to the peer
paying the fees for a transaction; v2 of openchannel will make
this no longer true. Instead we rename this to 'opener', or the
peer sending the 'open_channel' message, since this will be universally
true in a dual-funding world.
One is called on every plugin return, and tells us whether to continue;
the other is only called if every plugin says ok.
This works for things like payload replacement, where we need to process
the results from each plugin, not just the final one!
We should probably turn everything into a chained callback next
release.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They callback must take ownership of the payload (almost all do, but
now it's explicit).
And since the payload and cb_arg arguments to plugin_hook_call_() are
always identical, make them a single parameter.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that it's channeld which calculates the shared secret, too. This
minimizes the work that lightningd has to do, at cost of passing this
through.
We also don't yet save the blinding field(s) to the database.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This requires us to call ecdh() in the corner case where the blinding seed
is in the TLV itself (which is the case for the start of a blinded route).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Use `LC_ALL=C sort` instead of `sort` so that mocks get sorted in
the same way on all developers' environments.
Re-record the result of `make update-mocks`.
Changelog-None
This is useful in general, but in particular it allows fundchannel to avoid YA
query to figure out if it can wumbo.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON: `connect` returns `features` of the connected peer on success.
For messages, we use the onion but payload lengths 0 and 1 aren't special.
Create a flag to disable that logic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Even without optimization, it's faster to walk all the channels than
ping another daemon and wait for the response.
Changelog-Changed: Forwarding messages is now much faster (less inter-daemon traffic)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The idea is that gossipd can give us the cupdate we need for an error, and
we wire things up so that we ask for it (async) just before we send the
error to the subdaemon.
I tried many other things, but they were all too high-risk.
1. We need to ask gossipd every time, since it produces these lazily
(in particular, it doesn't actually generate an offline update unless
the channel is used).
2. We can't do async calls in random places, since we'll end up with
an HTLC in limbo. What if another path tries to fail it at the same time?
3. This allows us to use a temporary_node_failure error, and upgrade it
when gossipd replies. This doesn't change any existing assumptions.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This completes the conversion; any in-flight HTLC failures get turned into temporary_node_failures.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
At the moment, we store e.g. WIRE_TEMPORARY_CHANNEL_FAILURE, and then
lightningd has a large demux function which turns that into the correct
error message.
Such an enum demuxer is an anti-pattern.
Instead, store the message directly for output HTLCs; channeld now
sends us an error message rather than an error code.
For input HTLCs we will still need the failure code if the onion was
bad (since we need to prompt channeld to send a completely different
message than normal), though we can (and will!) eliminate its use in
non-BADONION failure cases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to change our internal structure next, so this is preparation.
We populate existing errors with temporary node failures, for simplicity.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of making it ourselves, lightningd does it. Now we only have
two cases of failed htlcs: completely malformed (BADONION), and with
an already-wrapped onion reply to send.
This makes channeld's job much simpler.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I hadn't realized that lightningd asks gossipd every time we forward
a payment. But I'm going to abuse it here to get the latest channel_update,
otherwise (as lightningd takes over error message generation) lightningd
needs to do an async request at various painful points.
So have gossipd tell us the lastest update (stripped so compatible with
the strange in-onion-error format).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If the peer is not connected, or other error which means we don't
actually create an outgoing HTLC, we don't record the
short_channel_id. This is unhelpful!
Pass the scid down to the wallet code, and explicitly hand the
scid and amount down to the notification code rather than handing it
the htlc_out (which it doesn't need).
Changelog-Changed: JSON API: `listforwards` now shows `out_channel` even if we couldn't forward.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before this patch we used `int` for error codes. The problem with
`int` is that we try to pass it to/from wire and the size of `int` is
not defined by the standard. So a sender with 4-byte `int` would write
4 bytes to the wire and a receiver with 2-byte `int` (for example) would
read just 2 bytes from the wire.
To resolve this:
* Introduce an error code type with a known size:
`typedef s32 errcode_t`.
* Change all error code macros to constants of type `errcode_t`.
Constants also play better with gdb - it would visualize the name of
the constant instead of the numeric value.
* Change all functions that take error codes to take the new type
`errcode_t` instead of `int`.
* Introduce towire / fromwire functions to send / receive the newly added
type `errcode_t` and use it instead of `towire_int()`.
In addition:
* Remove the now unneeded `towire_int()`.
* Replace a hardcoded error code `-2` with a new constant
`INVOICE_EXPIRED_DURING_WAIT` (903).
Changelog-Changed: The waitinvoice command would now return error code 903 to designate that the invoice expired during wait, instead of the previous -2
This command injects a custom message into the encrypted transport stream to
the peer, allowing users to build custom protocols on top of c-lightning
without requiring any changes to c-lightning itself.
Generally I prefer structures over u8, since the size is enforced at
runtime; and in several places we were doing conversions as the code
using Sphinx does treat struct secret as type of the secret.
Note that passing an array is the same as passing the address, so
changing from 'u8 secret[32]' to 'struct secret secret' means various
'secret' parameters change to '&secret'. Technically, '&secret' also
would have worked before, since '&' is a noop on array, but that's
always seemed a bit weird.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes it clear we're dealing with a message which is a wrapped error
reply (needing unwrap_onionreply), not an already-wrapped one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`wallet_payment_store` would free the `wallet_payment` instance which would
then cause us to reload it from the DB. Instead of doing the store->free->load
dance we now tell `wallet_payment_store` whether it should take ownership and
leave it alone if not.
Passing the payment around instead of referencing it through payment_hash and
partid is a nice side-effect.
This increments the `data_version` upon committing dirty transactions, reads
the last data_version upon startup, and tracks the number in memory in
parallel to the DB (see next commit for rationale).
Changelog-Changed: JSON-RPC: Added a `data_version` field to the `db_write` hook which returns a numeric transaction counter.
This is the final step: we pass the complete fee_states to and from
channeld.
Changelog-Fixed: "Bad commitment signature" closing channels when we sent back-to-back update_fee messages across multiple reconnects.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
niftynei
Rusty Russell
Christian Decker
Vasil Dimov
darosior