This function ensures we have all the infos we need to continue if the
htlc_accepted hook tells us to. It also enforces well-formedness of the TLV
payload if we have a TLV payload.
Suggested-by: List Neigut <@niftynei>
Signed-off-by: Christian Decker <@cdecker>
We wire in the code-generated function, which removes the upfront validation
and add the validation back after the `htlc_accepted` hook returns. If a
plugin wanted to handle the onion in a special way it'll not have told us to
just continue.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: JSON API: `htlc_accepted` hook has `type` (currently `legacy` or `tlv`) and other fields directly inside `onion`.
Changelog-deprecated: JSON API: `htlc_accepted` hook `per_hop_v0` object deprecated, as is `short_channel_id` for the final hop.
Feerate changes are asymmetric, as they can only be sent by the funder.
For FUNDER, the remote feerate is set when upon send of
commitment_signed, and the local feerate is set on receipt of
revoke_and_ack.
For non-funder, the local feerate is set on receipt of
commitment_signed, and the remote feerate set on send of
revoke_and_ack. In our code, these two happen together.
channeld gets this right, but lightningd ignored the funder/fundee
distinction, and as a result, receipt of a commitment_signed by the
funder altered fees in the database. If there was a reconnection
event or restart, then these (incorrect) values would be used, causing
us to complain about a 'Bad commit_sig signature' and close the
channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
WIRE_REQUIRED_CHANNEL_FEATURE_MISSING anticipates a glorious Wumbo future,
and is closer to correct (it's a PERM failure).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This removes the WIRE_FINAL_EXPIRY_TOO_SOON which leaked too much info,
and adds the blockheight to WIRE_INCORRECT_OR_UNKNOWN_PAYMENT_DETAILS.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We want to still allow incoming connections, and reestablishment of
channels, but if one tries to give us an HTLC, stall until we're
synced.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we don't know block height, we shouldn't be sending HTLCs. This
stops us forwarding HTLCs as well as new payments.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In file included from wallet/test/run-wallet.c:15:0:
./lightningd/peer_htlcs.c: In function ‘htlcs_reconnect’:
./lightningd/peer_htlcs.c:2060:15: error: ‘failcode’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
} else if (failcode) {
^~~~~~~~
./lightningd/peer_htlcs.c:2056:19: error: ‘failcode’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
failcode != 0
~~~~~~~~~^~~~
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Warp this process as a new function: 'void json_format_forwarding_object()'. This function will be used in 'forward_event' next, and can ensure the consistent json object structure for forward_payment between 'listforwards' API and 'forward_event' notification.
This is the other origin, besides `bitcoin_tx`, where we create `bitcoin_tx`
instances, so add the context as soon as possible. Sadly I can't weave the
chainparams into the deserialization code since that'd need to change all the
generated wire code as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
updates the bolt version to 6639cef095a2ecc7b8f0c48c6e7f2f906fbfbc58.
this requires us to use the new bolt parser at generate-bolt.py
and updates to all of the type specifications (ie. from u8 -> byte)
Direct leak of 1024 byte(s) in 2 object(s) allocated from:
#0 0x7f4c84ce4448 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10c448)
#1 0x55d11b782c96 in timer_default_alloc ccan/ccan/timer/timer.c:16
#2 0x55d11b7832b7 in add_level ccan/ccan/timer/timer.c:166
#3 0x55d11b783864 in timer_fast_forward ccan/ccan/timer/timer.c:334
#4 0x55d11b78396a in timers_expire ccan/ccan/timer/timer.c:359
#5 0x55d11b774993 in io_loop ccan/ccan/io/poll.c:395
#6 0x55d11b72322f in plugins_init lightningd/plugin.c:1013
#7 0x55d11b7060ea in main lightningd/lightningd.c:664
#8 0x7f4c84696b6a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x26b6a)
To fix this, we actually make 'ld->timers' a pointer, so we can clean
it up last of all. We can't free it before ld, because that causes
timers to be destroyed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we ever do this, we'd end up with an unspendable commitment tx anyway.
It might be able to happen if we have htlcs added from the non-fee-paying
party while the fees are increased, though. But better to close the
channel and get a report about it if that happens.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
"result" should always be an object (so that we can add new fields),
so make that implicit in json_stream_success.
This makes our primitives well-formed: we previously used NULL as our
fieldname when calling the first json_object_start, which is a hack
since we're actually in an object and the fieldname is 'result' (which
was already written by json_object_start).
There were only two cases which didn't do this:
1. dev-memdump returned an array. No API guarantees on this.
2. shutdown returned a string.
I temporarily made shutdown return an empty object, which shouldn't
break anything, but I want to fix that later anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are generalized from our internal implementations.
The main difference is that 'struct json_escaped' is now 'struct
json_escape', so we replace that immediately.
The difference between lightningd's json-writing ringbuffer and the
more generic ccan/json_out is that the latter has a better API and
handles escaping transparently if something slips through (though
it does offer direct accessors so you can mess things up yourself!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was incorrectly handled before, hence the wrapper which checks
correctness of the arguments.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This takes the guesswork out of `drop_to_chain` and allows us to annotate the
last_tx consistently.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Since we have more or less given up on the separation between response
callback and deserialization we can also just have the individual parts
returned.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Suggested-by: Rusty Russell <@rustyrussell>
It disables the error when attempting to do a state transition from
`RCVD_ADD_ACK_REVOCATION` to `RCVD_ADD_ACK_REVOCATION` which was done before
getting to this point.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Since we might soon be changing the payload it is a good idea to not just
expose the v0 payload, but also the raw payload for the plugin to
interpret. This might also include payloads that `lightningd` itself cannot
understand, but the plugin might.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Suggested-by: Corné Plooy <@bitonic-cjp>
This is a rather simple hook that allows a plugin to take control over
HTLCs that were accepted, but weren't resolved as part of an invoice
or forwarded to the next hop yet.
The goal is to allow plugins to terminate a route early, perform
intermediate checks before the payment is accepted (check inventory or
service delivery before accepting in order to avoid a refund for
example) or handle an onion differently if it has a different
realm (cross-chain atomic swaps).
This doesn't implement serializing the payload or deserializing it,
instead just passes the full context along. The details for
serializing and deserializing will be implemented in a future commit.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
A new string field is added to the command structure and is specified at the creation of each native command, and in the JSON created by 'json_add_help_command()'.
New fields don't have to be spelled out twice.
The raw version are called _only, so we don't miss a call
accidentally. We can rename them when we finally deprecated old
fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to make it async, so start by moving the core code into
invoice.c and having that directly call fail/success functions for the
htlc.
We add an extra check in fulfill_htlc() that the HTLC state is correct:
that can't happen now, but may once we're async.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christian Decker
darosior
Rusty Russell
Yash Bhutwala
trueptolemy
lisa neigut
trueptolemy