We have to do a dance when we get a reconnect in openingd, because we
don't normally expect to free both owner and peer. It's a layering
violation: freeing a peer should clean up the owner's pointer to it,
to avoid a double free, and we can eliminate this dance.
The free order is now different, and the test_reconnect_openingd was
overprecise.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This fixes the only case where the master currently has to write directly
to the peer: re-sending an error. We make gossipd do it, by adding
a new gossipctl_fail_peer message.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We pull them from the database on-demand, where we're storing them
anyway. No need to keep them in memory as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
No idea why we were iterating over the list of stubs and then passing
in the index instead of a pointer to the stub directly.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This wires in the loading of `struct htlc_stub`s on-demand when
starting `onchaind` so that we don't need to keep them in memory.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
peer_fail_permanent() frees peer->owner, but for bad_peer() we're
being called by the sd->badpeercb(), which then goes on to
io_close(conn) which is a child of sd.
We need to detach the two for this case, so neither tries to free the
other.
This leads to a corner case when the subd exits after the peer is gone:
subd->peer is NULL, so we have to handle that too.
Fixes: #282
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have a race where we start onchaind, but state is unchanged, so checks
like peer_control.c's:
peer_ready = (peer->owner && peer->state == CHANNELD_AWAITING_LOCKIN);
if (!peer_ready) {
log_unusual(peer->log,
"Funding tx confirmed, but peer state %s %s",
peer_state_name(peer->state),
peer->owner ? peer->owner->name : "unowned");
} else {
subd_send_msg(peer->owner,
take(towire_channel_funding_locked(peer,
peer->scid)));
}
Can send to the wrong daemon.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We re-use the value for reasonable_depth given by the master, and we
tell it when our timeout transactions reach that depth.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When we see an offered HTLC onchain, we need to use the preimage if we
know it. So we dump all the known HTLC preimages at startup, and send
new ones as we discover them.
This doesn't cover preimages we know because we're the final
recipient; that can happen if an HTLC hasn't been irrevocably
committed yet. We'll do that in a followup patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If the HSM is slow it might happen that the timestamp has changed the
second time we come around, so we generate the timestamp externally
and pass it in so we're sure it won't change between calls.
Reported-by: Rusty Russell
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This change is really to allow us to have a --dev-fail-on-subdaemon-fail option
so we can handle failures from subdaemons generically.
It also neatens handling so we can have an explicit callback for "peer
did something wrong" (which matters if we want to close the channel in
that case).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the step where we broadcast the transaction to the network and
a nice place to extract the change from the transaction.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
So far we were always using the deadline in the announcements, that's
obviously not good, so this introduces the parameter as per spec.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We weren't killing it. Eventually it would die, and peer_owner_finished()
would access subd->peer->owner, but that peer was freed already.
Closes: #261
Reported-by: Christian Decker <decker.christian@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To reproduce the next bug, I had to ensure that one node keeps thinking it's
disconnected, then the other node reconnects, then the first node realizes
it's disconnected.
This code does that, adding a '0' dev-disconnect modifier. That means
we fork off a process which (due to pipebuf) will accept a little
data, but when the dev_disconnect file is truncated (a hacky, but
effective, signalling mechanism) will exit, as if the socket finally
realized it's not connected any more.
The python tests hang waiting for the daemon to terminate if you leave
the blackhole around; to give a clue as to what's happening in this
case I moved the log dump to before killing the daemon.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In this case, we unset the old subd->peer, then freed subd.
peer_owner_finished dereferenced subd->peer->owner, and boom:
test_disconnect_funder (__main__.LightningDTests) ... Fatal signal 11. Log dumped in crash.log
------------------------------- Valgrind errors --------------------------------
Valgrind error file: valgrind-errors.2882
==2882== Invalid read of size 8
==2882== at 0x413F74: peer_owner_finished (peer_control.c:679)
==2882== by 0x41EA2C: destroy_subd (subd.c:381)
==2882== by 0x459700: notify (tal.c:240)
==2882== by 0x459BB1: del_tree (tal.c:400)
==2882== by 0x459FC0: tal_free (tal.c:509)
==2882== by 0x413796: peer_reconnected (peer_control.c:493)
==2882== by 0x413A6A: add_peer (peer_control.c:592)
==2882== by 0x40ED1F: handshake_succeeded (new_connection.c:186)
==2882== by 0x41E3DD: sd_msg_reply (subd.c:262)
==2882== by 0x41E6BB: sd_msg_read (subd.c:318)
==2882== by 0x41E4E6: read_fds (subd.c:283)
==2882== by 0x44DEB4: next_plan (io.c:59)
==2882== Address 0x838 is not stack'd, malloc'd or (recently) free'd
==2882==
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The logic of dispatching the announcement_signatures message was
distributed over several places and daemons. This aims to simplify it
by moving it all into `channeld`, making peer_control only report
announcement depth to `channeld`, which then takes care of the
rest. We also do not reuse the funding_locked tx watcher since it is
easier to just fire off a new watcher with the specific purpose of
waiting for the announcement_depth.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Some fields were redundant, some are simply moved into 'struct lightningd'.
All routines updated to hand 'struct lightningd *ld' now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Also, we split the more sophisticated json_add helpers to avoid pulling in
everything into lightning-cli, and unify the routines to print struct
short_channel_id (it's ':', not '/' too).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To avoid everything pulling in HTLCs stuff to the opening daemon, we
split the channel and commit_tx routines into initial_channel and
initial_commit_tx (no HTLC support) and move full HTLC supporting versions
into channeld.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're very simple about it: if there's a reorganization, we restart. Otherwise
we tell it about everything.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's in the shachain, so storing it is completely redundant. We leave
it in for the moment so we can assert() that nothing has changed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The peer->seed needs to be unique for each channel, since bitcoin
pubkeys and the shachain are generated from it. However we also need
to guarantee that the same seed is generated for a given channel every
time, e.g., upon a restart. The DB channel ID is guaranteed to be
unique, and will not change throughout the lifetime of a channel, so
we simply mix it in, instead of a separate increasing counter.
We also needed to make sure to store in the DB before deriving the
seed, in order to get an ID assigned by the DB.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is the big one, and it's completely anticlimactic: it loads all
channels that have reached opening and are not marked as
closingd_complete into memory, that's it.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This was supposed to be a temporary solution anyway, and I had a
rather annoying mixup between peer_id and unique_id, the latter of
which is actually a connection identifier.
Add the channel to the peer on the two open paths (fundee and funder)
and store it into the database. Currently fails when opening a channel
to a known peer after loading from DB because we attempt to insert a
new peer with the same node_id. Will fix later.
Rusty Russell
Christian Decker