Even without optimization, it's faster to walk all the channels than
ping another daemon and wait for the response.
Changelog-Changed: Forwarding messages is now much faster (less inter-daemon traffic)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a common thing to do, so create a macro.
Unfortunately, it still needs the type arg, because the paramter may
be const, and the return cannot be, and C doesn't have a general
"(-const)" cast.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Add new check if we're funder trying to add HTLC, keeping us
with enough extra funds to pay for another HTLC the peer might add.
We also need to adjust the spendable_msat calculation, and update
various tests which try to unbalance channels. We eliminate
the now-redundant test_channel_drainage entirely.
Changelog-Fixed: Corner case where channel could become unusable (https://github.com/lightningnetwork/lightning-rfc/issues/728)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The newly introduced type is used to determine what the call semantics of the
hook are. We have `single` corresponding to the old behavior, as well as
`chain` which allows multiple plugins to register for the hook, and they are
then called sequentially (if all plugins return `{"result": "continue"}`) or
exit the chain if the hook event was handled.
This solves a couple of issues with the need to synchronously drop the
connection in case we were required to understand what the peer was talking
about while still allowing users to experiment, just not kill connections.
We cannot let users use `sendcustommsg` to inject messages that are handled
internally since it could result in our internal state tracking being borked.
This command injects a custom message into the encrypted transport stream to
the peer, allowing users to build custom protocols on top of c-lightning
without requiring any changes to c-lightning itself.
This is needed to fully implement handling of blockheight disagreements
between us and payee.
If payee believes the blockheight is higher than ours, then `pay`
should wait for our node to achieve that blockheight.
Changelog-Add: Implement `waitblockheight` to wait for a specific blockheight.
This is the final step: we pass the complete fee_states to and from
channeld.
Changelog-Fixed: "Bad commitment signature" closing channels when we sent back-to-back update_fee messages across multiple reconnects.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a transient field, so rework things so we don't leave it in
struct htlc_out. Instead, load htlc_in first and connect htlc_out to
them as we go.
This also changes one place where we use it instead of the am_origin
flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: .lightningd plugins and files moved into <network>/ subdir
Changelog-changed: WARNING: If you don't have a config file, you now may need to specify the network to lightning-cli
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Printed form is always "[<nodeid>-]<prefix>: <string>"
2. "jcon fd %i" becomes "jsonrpc #%i".
3. "jsonrpc" log is only used once, and is removed.
4. "database" log prefix is use for db accesses.
5. "lightningd(%i)" becomes simply "lightningd" without the pid.
6. The "lightningd_" prefix is stripped from subd log prefixes, and pid removed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Logging: formatting made uniform: [NODEID-]SUBSYSTEM: MESSAGE
Changelog-removed: `lightning_` prefixes removed from subdaemon names, including in listpeers `owner` field.
We had a separate logbook for each peer, and copy log entries above
the printable log level into the master logbook. This didn't always
work well, since we didn't dump it on crash for example.
Keep a single global logbook instead, and remove this infrastructure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A log can have a default node_id, which can be overridden on a per-entry
basis. This changes the format of logging, so some tests need rework.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If a 'upfront_shutdown_script' was specified, show the address +
scriptpubky in `listpeers`
Changelog-added: JSON API: `listpeers` channels now include `close_to` and `close_to_addr` iff a `close_to` address was specified at channel open
Takes advantage of upfront-shutdown-script to permit users to
specify the close-to address for a channel at open, by adding
a `close_to` field to `fundchannel_start`.
Note that this only is in effect if `fundchannel_start` returns
with `close_to` set -- otherwise, peer doesn't
support `option_upfront_shutdown_script`.
This is mainly an internal-only change, especially since we don't
offer any globalfeatures.
However, LND (as of next release) will offer global features, and also
expect option_static_remotekey to be a *global* feature. So we send
our (merged) feature bitset as both global and local in init, and fold
those bitsets together when we get an init msg.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This patch adds a channel_id parameter to allow for specifying
channels that are lacking a short_channel_id.
Useful in the case where a peer has 1) multiple channels (ONCHAIN etc)
and 2) a channel where the funding transaction hasn't been
broadcast/mined.
Command format: close id [unilateraltimeout] [destination]
Close the channel with peer {id}, forcing a unilateral
close after {unilateraltimeout} seconds if non-zero, and
the to-local output will be sent to {destination}. If
{destination} isn't specified, the default is the address
of lightningd.
Also change the pylightning:
update the `close` API to support `destination` parameter
Currently the only source for amount_asset is the value getter on a tx output,
and we don't hand it too far around (mainly ignoring it if it isn't the
chain's main currency). Eventually we could bubble them up to the wallet, use
them to select outputs or actually support assets in the channels.
Since we don't hand them around too widely I thought it was ok for them to be
pass-by-value rather than having to allocate them and pass them around by
reference. They're just 41 bytes currently so the overhead should be ok.
Signed-off-by: Christian Decker <@cdecker>
It's generally clearer to have simple hardcoded numbers with an
#if DEVELOPER around it, than apparent variables which aren't, really.
Interestingly, our pruning test was always kinda broken: we have to pass
two cycles, since l2 will refresh the channel once to avoid pruning.
Do the more obvious thing, and cut the network in half and check that
l1 and l3 time out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`close` takes two optional arguments: `force` and `timeout`.
`timeout` doesn't timeout the close (there's no way to do that), just
the JSON call. `force` (default `false`) if set, means we unilaterally
close at the timeout, instead of just failing.
Timing out JSON calls is generally deprecated: that's the job of the
client. And the semantics of this are confusing, even to me! A
better API is a timeout which, if non-zero, is the time at which we
give up and unilaterally close.
The transition code is awkward, but we'll manage for the three
releases until we can remove it.
The new defaults are to unilaterally close after 48 hours.
Fixes: #2791
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The reason lnd was sending sync error was that we were taking more than
30 seconds to send the channel_reestablish after connect. That's
understandable on my test node under valgrind, but shouldn't happen normally.
However, it seems it has at least once,
(see https://github.com/ElementsProject/lightning/issues/2847)
: space out startup so it's less likely to happen.
Suggested-by: @cfromknecht
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The spec says to close the channel if they send us an error, but we
need to be more lenient to preserve channels with other
implementations.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We normally reconnect after 1 second: have a flag to say wait for
60. This will be used in the next patch which handles "soft" errors.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'channel_fail_transient_slowretry.patch':
fixup! lightningd: add slow_reconnect flag for transient failure.
@ZmnSCPxj points out that function is unsafe, since omitting the bool
parameter still compiled. Make it two separate functions, each
with a distinctive name so every caller has to be fixed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And clean up some dev ones which actually happen (mainly by calling
channel_fail_permanent which logs UNUSUAL, rather than
channel_internal_error which logs BROKEN).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of deleting the channels we will simple mark them as `CLOSED` from now
on. This is needed for some of the other tables not to end up with dangling
references that would otherwise survive the channel lifetime, e.g., forwards
and transactions.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Michael Schmoock
Rusty Russell
darosior
Christian Decker
ZmnSCPxj
lisa neigut
gorazdko
trueptolemy