The check command allows us to check the parameters of a command
without running it. Example:
lightning-cli check invoice 234 foo desc
We do this by removing the "command_to_check" parameter and then using the
remaining parameters as-is.
I chose the parameter name "command_to_check" instead of just "command" because
it must be unique to all other parameter names for all other commands. Why?
Because it may be ambiguous in the case of a json object, where the parameters are
not necessary ordered. We don't know which one is the command to check and
which one is a parameter.
Signed-off-by: Mark Beckwith <wythe@intrig.com>
We can now set a flag to have param() ignore unexpected parameters.
Normally unexpected parameters are considered errors.
Needed by the check command.
Signed-off-by: Mark Beckwith <wythe@intrig.com>
This is needed in order to be able to add methods while initializing
the plugins, but before actually moving to the config dir and starting
to listen.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We now keep multiple commands for a json_connection, and an array of
json_streams.
When a command wants to write something, we allocate a new json_stream
at the end of the array.
We always output from the first available json_stream; once that
command has finished, we free that and move to the next. Once all are
done, we wake the reader.
This means we won't read a new command if output is still pending, but
as most commands don't start writing until they're ready to write
everything, we still get command parallelism.
In particular, you can now 'waitinvoice' and 'delinvoice' and it will
work even though the 'waitinvoice' blocks.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
json_stream_success / json_stream_fail belong in jsonrpc.c, and the
json_tok helpers for special types belong in json.x
json_add_object() isn't used, remove it rather than moving it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We promote 'struct json_stream' to contain the membuf; we only attach
the json_stream to the command when we actually call
json_stream_success / json_stream_fail.
This means we are closer to 'struct json_stream' being an independent
layer; the tests are already modified to use it directly to create
JSON.
This is also the first step toward re-enabling non-serial command
execution.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
My test case is a mainnet gossip store with 22107 channels, and
time to do `lightning-cli listchannels`:
Before: `lightning-cli listchannels` DEVELOPER=0
real 0m1.303000-1.324000(1.3114+/-0.0091)s
After:
real 0m0.629000-0.695000(0.64985+/-0.019)s
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's a very ugly one-liner; really ccan/io should have an io_replan
for this, but it would have to be written carefully as it makes
assumptions currently about plans not changing. In this case, we know
it's in io_write, and we're just moving a pointer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Such an API is required for when we stream it directly. Almost all our
handlers fit this pattern already, or nearly do.
We remove new_json_result() in favor of explicit json_stream_success()
and json_stream_fail(), but still allowing command_fail() if you just
want a simple all-in-one fail wrapper.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This isn't a big change, since we basically dump the entire JSON
resuly string into the membuf then write it out, but it's prep for the
next changes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We occasionaly had a travis hang in test_multirpc, and it's due to a
thinko in the prior patch: if a command completes immediately, it will
do the wake before we go to sleep. That means we don't digest the
rest of the buffer until the next write.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's a DoS if we keep reading commands and don't insist the client
read the responses.
My initial implementation simply removed the io_duplex, but that
doesn't work if we want to inject notifications in the stream (as we
will eventually want to do), so we operate it as duplex but have each
side wake the other when it's done.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's the only user of them, and it's going to get optimized.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
gossip.pydiff --git a/common/test/run-json.c b/common/test/run-json.c
index 956fdda35..db52d6b01 100644
And use wallet_forward_status_in_db() everywhere in db code.
And clean up extra CHANGELOG.md entry (looks like rebase error?)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It went something like:
niftynei: Hey, cppcheck complains this might be NULL, so I put in a check.
rusty: cppcheck is dumb. Make it an assert("Rusty always right!").
niftynei: You seem certain of this so I shall do that.
https://github.com/ElementsProject/lightning/pull/1994
...
renepickhardt: I asked fiatjaf to run
`lightning-cli sendpay "[{'id':'02db8f487fcc0a'}]" 4efe0ba89b`
and his node crashed!
rusty: grep Assertion logs/*
lightningd/jsonrpc.c:326: connection_complete_error: Assertion `Rusty is always right!' failed.
It turns out that in the 'can't parse' error case, we hand NULL cmd to
connection_compete_error.
Next time, less asserting, more grepping!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a bit of overkill now that we simply accumulate the entire
JSON response in the buffer before flushing, but when we move to
streamed responses it allows us to have a single command that has
exclusive access to the out direction of the JSON-RPC connection.
Instead of two code paths that return different help objects, simplify things by
always returning the full help object. This not only includes description and
the command name, but the verbose description as well.
Signed-off-by: William Casarin <jb55@jb55.com>
The help command now adds command usage to its output by calling each
command handler in CMD_USAGE mode.
Instead of seeing, for example:
decodepay
Decode {bolt11}, using {description} if necessary
we see:
decodepay bolt11 [description]
Decode {bolt11}, using {description} if necessary
Signed-off-by: Mark Beckwith <wythe@intrig.com>
Callers to param() can now optionally set a flag to see if command_fail was
called.
This is necessary because the `cmd` is freed in case of failure.
I spent a bit of time trying to extend the lifetime of the `cmd` to the end
of parse_request(), but the destructors still needed to be called when they
were, and it was getting ugly. So I took this minimal approach.
Signed-off-by: Mark Beckwith <wythe@intrig.com>
Now call param() even for commands that don't accept any parameters.
This is a bugfix of sorts. For example, before you could call:
bitcoin-cli getinfo blah
and the blah parameter would be ignored.
Now you will get an error: "too many parameters: got 1, expected 0"
Signed-off-by: Mark Beckwith <wythe@intrig.com>
Added the concept of a "command mode". The
behavior of param() changes based on the mode.
Added and tested the command mode of CMD_USAGE for
setting the usage of a command without running it.
Only infrastructure and test. No functional changes.
Signed-off-by: Mark Beckwith <wythe@intrig.com>
Code changes:
1. Expose daemon_poll() so lightningd can call it directly, which avoids us
having store a global and document it.
2. Remove the (undocumented, unused, forgotten) --rpc-file="" option to disable
JSON RPC.
3. Move the ickiness of finding the executable path into subd.c, so it doesn't
distract from lightningd.c overview.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was a very simple change and allowed us to remove the special
`json_opt_tok` macro.
Moved the callback out of `common/json.c` to `lightningd/json.c` because the new
callbacks are dependent on `struct command` etc.
(I already started on `json_tok_number`)
My plan is to:
1. upgrade json_tok_X one a time, maybe a PR for each one.
2. When done, rename macros (i.e, remove "_tal").
3. Remove all vestiges of the old callbacks
4. Add new callbacks so that we no longer need json_tok_tok!
(e.g., json_tok_label, json_tok_str, json_tok_msat)
Signed-off-by: Mark Beckwith <wythe@intrig.com>
The easiest way to do this is to play with the 'wallet_tx' semantics
and have 'amount' have meaning even when 'all_funds' is set.
Note that we change the string 'Cannot afford funding transaction' to
'Cannot afford transaction' as this code is also used for withdrawls.
Inspired-by: molz on #c-lightning
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Just log the failed ones, not every connection and successful commands.
Before (VALGRIND=0 -n10):
111 passed, 1 skipped in 175.78 seconds
After:
111 passed, 1 skipped in 173.92 seconds
111 passed, 1 skipped in 164.16 seconds
111 passed, 1 skipped in 171.30 seconds
111 passed, 1 skipped in 180.05 seconds
111 passed, 1 skipped in 180.04 seconds
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This needs to be done separately from the rest of the daemon since we can
otherwise not make sure that it happens before the DB is freed and we might
still need the DN, and be running in a DB transaction, for some destructors to
run.
Removed `json_get_params`.
Also added json_tok_percent and json_tok_newaddr. Probably should
have been a separate PR but it was so easy.
[ Squashed comment update for gcc workaround --RR ]
Signed-off-by: Mark Beckwith <wythe@intrig.com>
Until now, `command_fail()` reported an error code of -1 for all uses.
This PR adds an `int code` parameter to `command_fail()`, requiring the
caller to explicitly include the error code.
This is part of #1464.
The majority of the calls are used during parameter validation and
their error code is now JSONRPC2_INVALID_PARAMS.
The rest of the calls report an error code of LIGHTNINGD, which I defined to
-1 in `jsonrpc_errors.h`. The intention here is that as we improve our error
reporting, all occurenaces of LIGHTNINGD will go away and we can eventually
remove it.
I also converted calls to `command_fail_detailed()` that took a `NULL` `data`
parameter to use the new `command_fail()`.
The only difference from an end user perspecive is that bad input errors that
used to be -1 will now be -32602 (JSONRPC2_INVALID_PARAMS).
If we're given a wildcard address, we can't announce it like that: we need
to try to turn it into a real address (using guess_address). Then we
use that address. As a side-effect of this cleanup, we only announce
*any* '--addr' if it's routable.
This fix means that our tests have to force '--announce-addr' because
otherwise localhost isn't routable.
This means that gossipd really controls the addresses now, and breaks
them into two arrays: what we bind to, and what we announce. That is
now what we return to the master for json_getinfo(), which prints them
as 'bindings' and 'addresses' respectively.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Mark Beckwith
Christian Decker
Conor Scott
William Casarin
lisa neigut
Mark Beckwith
arowser