We cannot let users use `sendcustommsg` to inject messages that are handled
internally since it could result in our internal state tracking being borked.
I really want a type which means "I am a wrapped onion reply" as separate
from "I am a normal wire msg". Currently both user u8 *, and I got very
confused trying to figure out where each one was an unwrapped error msg,
or where it still needed (un)wrapping.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Add towire_int() and fromwire_int() functions to "(de)serialize"
"int". This will only work as long as both the caller of towire_int()
and the caller of fromwire_int() use the same in-memory representation
of signed integers and have the same sizeof(int).
Changelog-None
TIL: `rename` doesn't like its source and target to be on different
partitions. This was causing the `hsmtool` tests to fail whenever we ran them
on a different partition than the lightning-dir (e.g., `/dev/shm` for faster
testing), because we made the backup copy in the current working directory.
This changes this and creates the backup next to the original file, which has
a reasonable chance to be on the same partition.
Changelog-Changed: hsmtool: The `hsmtool` now creates its backup copy in the same directory as the original `hsm_secret` file.
Recent FreeBSD versions use LLVM's lld as a linker, not the GNU ld.
Their behavior slightly differs, so adapt the build system to handle
either one.
* The LLVM's linker prints "undefined symbol:" instead of
"undefined reference to". Tweak tools/mockup.sh to also look for that
message.
* The LLVM's linker may only print the first dozen errors (omitting
the rest to avoid flooding the screen). tools/update-mocks.sh relies
on getting all errors as it extracts the missing symbols' names from
the error output and creates mocks for them. Detect if errors were
omitted and re-run, telling the linker to not omit any. The GNU linker
does not support -error-limit=0, so unfortunately we can't just run
with that option unconditionally from the first attempt.
* Nit: FreeBSD's sed(1) prints "t" for "\t" instead of a horizontal tab.
Use a verbatim tab in the command, instead of "\t" which works on
both.
Changelog-Fixed: Developer mode compilation on FreeBSD.
This is the final step: we pass the complete fee_states to and from
channeld.
Changelog-Fixed: "Bad commitment signature" closing channels when we sent back-to-back update_fee messages across multiple reconnects.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This, in the case of data loss on a channel with `option_static_remotekey`
negotiated, allows to likely (if the dbid is not unreasonable) recover
the funds from a remote unilateral close just with the hsm_secret.
Changelog-added: A new command, 'guesstoremote', is added to the hsmtool. It is meant to be used to recover funds after an unilateral close of a channel with `option_static_remotekey` enabled.
Since the parser itself just parses and doesn't include validation anymore we
need to put that functionality somewhere. The validation consists of enforcing
that the types are in monotonically increasing order without duplicates and
that for the even types we know how to handle it.
We were weaving in and out of generic code through `fromwire_tlvs` with custom
parameters defining the types in that namespace. This hard-wires the parser
with the namespace's types. Slowly trying to deprecate `fromwire_tlvs` in
favor of this typesafe variant.
This takes a dbid, a "depth" (how many points to dump), the hsm_secret
path, and a potential password to dump informations about all
commitments until the depth.
Co-Authored-By: Sjors Provoost <sjors@sprovoost.nl>
We now have a pointer to chainparams, that fails valgrind if we do anything
chain-specific before setting it.
Suggested-by: Rusty Russell <@rustyrussell>
These are special in extended regexs, and so we fail to match once we fix
the BOLT comment in common/test/run-bigsize.c
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Somehow this change got lost, but it's needed for option_static_remotekey,
to quote gen_peer_wire_csv:
msgtype,channel_reestablish,136
msgdata,channel_reestablish,channel_id,channel_id,
msgdata,channel_reestablish,next_commitment_number,u64,
msgdata,channel_reestablish,next_revocation_number,u64,
msgdata,channel_reestablish,your_last_per_commitment_secret,byte,32,option_data_loss_protect,option_static_remotekey
msgdata,channel_reestablish,my_current_per_commitment_point,point,,option_data_loss_protect
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Makefile:424: warning: overriding recipe for target 'clean'
tools/Makefile:12: warning: ignoring old recipe for target 'clean'
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Because it required update-mocks, which is a hack which relies on the
format of linker errors (!) I'd prefer to make this --enable-developer
only.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to tell it that the tmp file is an intermediate, so doesn't need
remaking if it doesn't exist.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Our TLV serializer relies on TLV outputs to be ordered by type
number. Prior to this commit we relied on 1) the ordering in the
RFC to be correct and 2) users to be using a version of Python that
respects stable ordering of dicts (i.e. Python 3.7+)
Instead of relying on these implicitly, we now explicitly sort messages
by type number when the TLV sets.
Resolves#2956.
Thanks-To: @ScottTre for the sort function
Reported-By: @ZmnSCPxj
1. These days we delete the [Unreleased] tag during rcs.
2. Make sure we test the release build process during rc1, since I
screwed that up last release.
3. Add a section on rc2, etc.
4. Do final release via a github PR, since I screwed that up on the
prior release.
5. Update `tools/build-release.sh` and instructions to show that we now
make a reproducible build for Ubuntu 18.04 x86-64.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This simplifies the dependencies:
1. Objs depend on headers, not other objs.
2. Programs depend on objs.
3. A .o file will generally implicitly depend on the .c file it's built from.
4. If a file has a build line, it's often better to list all deps there.
5. I spotted some missing 'make clean' files.
The particular problem in this case seems to be that make would use
tools/test/gen_test.c before it was ready. It's probably confused by
the use of recursive make via update-mocks, so explicitly split that
into two stages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Naturally, it's a struct pubkey. However, those are large, and take
time to marshal, so gossipd treats them as node_id which is a simple
array. It adds explicit checks at the right points to make sure
they're valid pubkeys.
However, the next commit adds TLV test vectors, which assumes we treat
node_id as a point (thus catch invalid values when parsing). The best
solution is to restrain our types here to exactly those we've
optimized for.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes it build for me on FreeBSD 11:
1. $(MAKE) has to passed through into update-mocks.
2. FreeBSD sed doesn't turn \n into a newline on RHS.
3. Bash and mako dependencies were missing from INSTALL.md
Fixes: #2850
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
TLVs have an implicit `len` field, so allow expressions containing
that (eg. `len-1`), but assume it means "the remainder of the
message".
This means in most places, f.size() needs an fallback for the
implicit-length case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They're currently called varint, but there's a proposal to call them all
bigsize. Allow both for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to hand -s to both header and body generation, or neither:
wire/gen_peer_wire.c:53:13: error: static declaration of ‘towire_channel_update_timestamps’ follows non-static declaration
In file included from wire/gen_peer_wire.c:5:
./wire/gen_peer_wire.h:78:6: note: previous declaration of ‘towire_channel_update_timestamps’ was here
We also need it for printwire, otherwise we get static unused functions for subtypes:
devtools/gen_print_wire.c:155:13: error: ‘printwire_channel_update_checksums’ defined but not used [-Werror=unused-function]
static void printwire_channel_update_checksums(const char *fieldname, const u8 **cursor, size_t *plen)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
devtools/gen_print_wire.c:133:13: error: ‘printwire_channel_update_timestamps’ defined but not used [-Werror=unused-function]
static void printwire_channel_update_timestamps(const char *fieldname, const u8 **cursor, size_t *plen)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christian Decker
Rusty Russell
Vasil Dimov
lisa neigut
darosior
trueptolemy