Previously we were annotating every movement with the blockheight of
lightningd at notification time. Which is lossy in terms of info, and
won't be helpful for reorg reconciliation. Here we switch over to
logging chain moves iff they've been confirmed.
Next PR will fix this up for withdrawals, which are currently tagged
with a blockheight of zero, since we log on successful send.
Adds a new plugin notification for getting information about coin
movements. Also includes two 'helper' notification methods that can be
called from within lightningd. Separated from the 'common' set because
the lightningd struct is required to finalize the blockheight etc
Changelog-Added: Plugins: new notification type 'coin_movement'
We don't compile with NDEBUG defined, but if we did, this code would
vanish. I did a quick audit, inspired by @ZmnSCPxj.
I actually hacked up something to compile with NDEBUG (many unused vars
resulted, and of course unit tests are allowed to rely on assert()), and
after this the testsuite still passes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If the peer is not connected, or other error which means we don't
actually create an outgoing HTLC, we don't record the
short_channel_id. This is unhelpful!
Pass the scid down to the wallet code, and explicitly hand the
scid and amount down to the notification code rather than handing it
the htlc_out (which it doesn't need).
Changelog-Changed: JSON API: `listforwards` now shows `out_channel` even if we couldn't forward.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before this patch we used `int` for error codes. The problem with
`int` is that we try to pass it to/from wire and the size of `int` is
not defined by the standard. So a sender with 4-byte `int` would write
4 bytes to the wire and a receiver with 2-byte `int` (for example) would
read just 2 bytes from the wire.
To resolve this:
* Introduce an error code type with a known size:
`typedef s32 errcode_t`.
* Change all error code macros to constants of type `errcode_t`.
Constants also play better with gdb - it would visualize the name of
the constant instead of the numeric value.
* Change all functions that take error codes to take the new type
`errcode_t` instead of `int`.
* Introduce towire / fromwire functions to send / receive the newly added
type `errcode_t` and use it instead of `towire_int()`.
In addition:
* Remove the now unneeded `towire_int()`.
* Replace a hardcoded error code `-2` with a new constant
`INVOICE_EXPIRED_DURING_WAIT` (903).
Changelog-Changed: The waitinvoice command would now return error code 903 to designate that the invoice expired during wait, instead of the previous -2
This makes it clear we're dealing with a message which is a wrapped error
reply (needing unwrap_onionreply), not an already-wrapped one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(The json when sendpay successes is too different when sendpay fails, so
divide the sendpay result into two notifications: `sendpay_success` and
`sendpay_failure`)
`sendpay_failure`
A notification for topic `sendpay_failure` is sent every time a sendpay
success(with `failed` status). The json is same as the return value of
command `sendpay`/`waitsendpay` when this cammand fails.
```json
{
"sendpay_failure": {
"code": 204,
"message": "failed: WIRE_UNKNOWN_NEXT_PEER (reply from remote)",
"data": {
"id": 2,
"payment_hash": "9036e3bdbd2515f1e653cb9f22f8e4c49b73aa2c36e937c926f43e33b8db8851",
"destination": "035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d",
"msatoshi": 100000000,
"amount_msat": "100000000msat",
"msatoshi_sent": 100001001,
"amount_sent_msat": "100001001msat",
"created_at": 1561395134,
"status": "failed",
"erring_index": 1,
"failcode": 16394,
"failcodename": "WIRE_UNKNOWN_NEXT_PEER",
"erring_node": "022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59",
"erring_channel": "103x2x1",
"erring_direction": 0
}
}
}
```
`sendpay` doesn't wait for the result of sendpay and `waitsendpay`
returns the result of sendpay in specified time or timeout, but
`sendpay_failure` will always return the result anytime when sendpay
fails if is was subscribed.
`sendpay_success`
A notification for topic `sendpay_success` is sent every time a sendpay
success(with `complete` status). The json is same as the return value of
command `sendpay`/`waitsendpay` when these cammand succeeds.
```json
{
"sendpay_success": {
"id": 1,
"payment_hash": "5c85bf402b87d4860f4a728e2e58a2418bda92cd7aea0ce494f11670cfbfb206",
"destination": "035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d",
"msatoshi": 100000000,
"amount_msat": "100000000msat",
"msatoshi_sent": 100001001,
"amount_sent_msat": "100001001msat",
"created_at": 1561390572,
"status": "complete",
"payment_preimage": "9540d98095fd7f37687ebb7759e733934234d4f934e34433d4998a37de3733ee"
}
}
```
`sendpay` doesn't wait for the result of sendpay and `waitsendpay`
returns the result of sendpay in specified time or timeout, but
`sendpay_success` will always return the result anytime when sendpay
successes if is was subscribed.
`forward_event`
A notification for topic `forward_event` is sent every time the status
of a forward payment is set. The json format is same as the API
`listforwards`.
```json
{
"forward_event": {
"payment_hash": "f5a6a059a25d1e329d9b094aeeec8c2191ca037d3f5b0662e21ae850debe8ea2",
"in_channel": "103x2x1",
"out_channel": "103x1x1",
"in_msatoshi": 100001001,
"in_msat": "100001001msat",
"out_msatoshi": 100000000,
"out_msat": "100000000msat",
"fee": 1001,
"fee_msat": "1001msat",
"status": "settled",
"received_time": 1560696342.368,
"resolved_time": 1560696342.556
}
}
```
or
```json
{
"forward_event": {
"payment_hash": "ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff",
"in_channel": "103x2x1",
"out_channel": "110x1x0",
"in_msatoshi": 100001001,
"in_msat": "100001001msat",
"out_msatoshi": 100000000,
"out_msat": "100000000msat",
"fee": 1001,
"fee_msat": "1001msat",
"status": "local_failed",
"failcode": 16392,
"failreason": "WIRE_PERMANENT_CHANNEL_FAILURE",
"received_time": 1560696343.052
}
}
```
- The status includes `offered`, `settled`, `failed` and `local_failed`,
and they are all string type in json.
- When the forward payment is valid for us, we'll set `offered`
and send the forward payment to next hop to resolve;
- When the payment forwarded by us gets paid eventually, the forward
payment will change the status from `offered` to `settled`;
- If payment fails locally(like failing to resolve locally) or the
corresponding htlc with next hop fails(like htlc timeout), we will
set the status as `local_failed`. `local_failed` may be set before
setting `offered` or after setting `offered`. In fact, from the
time we receive the htlc of the previous hop, all we can know the
cause of the failure is treated as `local_failed`. `local_failed`
only occuors locally or happens in the htlc between us and next hop;
- If `local_failed` is set before `offered`, this
means we just received htlc from the previous hop and haven't
generate htlc for next hop. In this case, the json of `forward_event`
sets the fields of `out_msatoshi`, `out_msat`,`fee` and `out_channel`
as 0;
- Note: In fact, for this case we may be not sure if this incoming
htlc represents a pay to us or a payment we need to forward.
We just simply treat all incoming failed to resolve as
`local_failed`.
- Only in `local_failed` case, json includes `failcode` and
`failreason` fields;
- `failed` means the payment forwarded by us fails in the
latter hops, and the failure isn't related to us, so we aren't
accessed to the fail reason. `failed` must be set after
`offered`.
- `failed` case doesn't include `failcode` and `failreason`
fields;
- `received_time` means when we received the htlc of this payment from
the previous peer. It will be contained into all status case;
- `resolved_time` means when the htlc of this payment between us and the
next peer was resolved. The resolved result may success or fail, so
only `settled` and `failed` case contain `resolved_time`;
- The `failcode` and `failreason` are defined in [BOLT 4][bolt4-failure-codes].
This notification bases on `LOG_BROKEN` and `LOG_UNUSUAL` level log.
--Introduction
A notification for topic `warning` is sent every time a new `BROKEN`/
`UNUSUAL` level(in plugins, we use `error`/`warn`) log generated, which
means an unusual/borken thing happens, such as channel failed,
message resolving failed...
```json
{
"warning": {
"level": "warn",
"time": "1559743608.565342521",
"source": "lightningd(17652): 0821f80652fb840239df8dc99205792bba2e559a05469915804c08420230e23c7c chan #7854:",
"log": "Peer permanent failure in CHANNELD_NORMAL: lightning_channeld: sent ERROR bad reestablish dataloss msg"
}
}
```
1. `level` is `warn` or `error`:
`warn` means something seems bad happened and it's under control, but
we'd better check it;
`error` means something extremely bad is out of control, and it may lead
to crash;
2. `time` is the second since epoch;
3. `source`, in fact, is the `prefix` of the log_entry. It means where
the event happened, it may have the following forms:
`<node_id> chan #<db_id_of_channel>:`, `lightningd(<lightningd_pid>):`,
`plugin-<plugin_name>:`, `<daemon_name>(<daemon_pid>):`, `jsonrpc:`,
`jcon fd <error_fd_to_jsonrpc>:`, `plugin-manager`;
4. `log` is the context of the original log entry.
--Note:
1. The main code uses `UNUSUAL`/`BROKEN`, and plugin module uses `warn`
/`error`, considering the consistency with plugin, warning choose `warn`
/`error`. But users who use c-lightning with plugins may want to
`getlog` with specified level when receive warning. It's the duty for
plugin dev to turn `warn`/`error` into `UNUSUAL`/`BROKEN` and present it
to the users, or pass it directly to `getlog`;
2. About time, `json_log()` in `log` module uses the Relative Time, from
the time when `log_book` inited to the time when this event happend.
But I consider the `UNUSUAL`/`BROKEN` event is rare, and it is very
likely to happen after running for a long time, so for users, they will
pay more attention to Absolute Time.
-- Related Change
1. Remove the definitions of `log`, `log_book`, `log_entry` from `log.c`
to `log.h`, then they can be used in warning declaration and definition.
2. Remove `void json_add_time(struct json_stream *result, const char
*fieldname, struct timespec ts)` from `log.c` to `json.c`, and add
related declaration in `json.h`. Now the notification function in
`notification.c` can call it.
2. Add a pointer to `struct lightningd` in `struct log_book`. This may
affect the independence of the `log` module, but storing a pointer to
`ld` is more direct;
I tried to just do gossipd, but it was uncontainable, so this ended up being
a complete sweep.
We didn't get much space saving in gossipd, even though we should save
24 bytes per node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
lisa neigut
rbndg
Rusty Russell
Vasil Dimov
Christian Decker
trueptolemy
trueptolemy
darosior