Allocating a htable is overkill for most nodes; we can fit 11 pointers
in the same space (10, since we use 1 to indicate we're using an array).
MCP results from 5 runs, min-max(mean +/- stddev):
store_load_msec:45947-47016(46683.4+/-4e+02)
vsz_kb:2639240
store_rewrite_sec:46.950000-49.830000(48.048+/-0.95)
listnodes_sec:1.090000-1.350000(1.196+/-0.095)
listchannels_sec:48.960000-57.640000(53.358+/-2.8)
routing_sec:29.990000-33.880000(31.088+/-1.4)
peer_write_all_sec:49.360000-53.210000(51.338+/-1.4)
MCP notable changes from previous patch (>1 stddev):
- vsz_kb:2641316
+ vsz_kb:2639240
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Makes the next step easier.
MCP results from 5 runs, min-max(mean +/- stddev):
store_load_msec:45791-46917(46330.4+/-3.6e+02)
vsz_kb:2641316
store_rewrite_sec:47.040000-48.720000(47.684+/-0.57)
listnodes_sec:1.140000-1.340000(1.2+/-0.072)
listchannels_sec:50.970000-54.250000(52.698+/-1.3)
routing_sec:29.950000-31.010000(30.332+/-0.37)
peer_write_all_sec:51.570000-52.970000(52.1+/-0.54)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Either private or simply not enough confirms. They would have been added
on reconnect, but that's not ideal.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This lets us benchmark without a valid blockchain.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'fixup!_gossipd__dev_option_to_allow_unknown_channels.patch':
fixup! gossipd: dev option to allow unknown channels.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For giant nodes, it seems we spend a lot of time memmoving this array.
Normally we'd go for a linked list, but that's actually hard: each
channel has two nodes, so needs two embedded list pointers, and when
iterating there's no good way to figure out which embedded pointer
we'd be using.
So we (ab)use htable; we don't really need an index, but it's good for
cache-friendly iteration (our main operation). We can actually change
to a hybrid later to avoid the extra allocation for small nodes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we asked `bitcoind` for a txout and it failed we were not storing that
information anywhere, meaning that when we see the channel announcement the
next time we'd be reaching out to `lightningd` and `bitcoind` again, just to
see it fail again. This adds an in-memory cache for these failures so we can
just ignore these the next time around.
Fixes#2503
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We need to do it in various places, but we shouldn't do it lightly:
the primitives are there to help us get overflow handling correct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Basically we tell it that every field ending in '_msat' is a struct
amount_msat, and 'satoshis' is an amount_sat. The exceptions are
channel_update's fee_base_msat which is a u32, and
final_incorrect_htlc_amount's incoming_htlc_amt which is also a
'struct amount_msat'.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a side-effect of using amount_msat in gossipd/routing.c, we explicitly
handle overflows and don't need to pre-prune ridiculous-fee channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Up until now, riskfactor was useless due to implementation bugs, and
also the default setting is wrong (too low to have an effect on
reasonable payment scenarios).
Let's simplify the definition (by assuming that P(failure) of a node
is 1), to make it a simple percentage. I examined the current network
fees to see what would work, and under this definition, a default of
10 seems reasonable (equivalent to 1000 under the old definition).
It is *this* change which finally fixes our test case! The riskfactor
is now 40msat (1500000 * 14 * 10 / 5259600 = 39.9), comparable with
worst-case fuzz is 50msat (1001 * 0.05 = 50).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were only comparing by total msatoshis.
Note, this *still* isn't sufficient to fix our indirect problem, as
our risk values are all 1 (the minimum):
lightning_gossipd(25480): 2 hop solution: 1501990 + 2
lightning_gossipd(25480): 3 hop solution: 1501971 + 3
...
lightning_gossipd(25480): => chose 3 hop solution
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have a seed, which is for (future!) unit testing consistency. This
makes it change every time, so our pay_direct_test is more useful.
I tried restarting the noed around the loop, but it tended to fail
rebinding to the same port for some reason?
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a general rule, lightningd shouldn't parse user packets. We move the
parsing into gossipd, and have it respond only to permanent failures.
Note that we should *not* unconditionally remove a channel on
WIRE_INVALID_ONION_HMAC, as this can be triggered (and we do!) by
feeding sendpay a route with an incorrect pubkey.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently only used by gossipd for channel elimination.
Also print them in canonical form (/[01]), so tests need to be
changed.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christian and I both unwittingly used it in form:
*tal_arr_expand(&x) = tal(x, ...)
Since '=' isn't a sequence point, the compiler can (and does!) cache
the value of x, handing it to tal *after* tal_arr_expand() moves it
due to tal_resize().
The new version is somewhat less convenient to use, but doesn't have
this problem, since the assignment is always evaluated after the
resize.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is mainly just copying over the copy-editing from the
lightning-rfc repository.
[ Split to just perform changes after the UNKNOWN_PAYMENT_HASH change --RR ]
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Reported-by: Rusty Russell <@rustyrussell>
This is mainly just copying over the copy-editing from the
lightning-rfc repository.
[ Split to just perform changes prior to the UNKNOWN_PAYMENT_HASH change --RR ]
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Reported-by: Rusty Russell <@rustyrussell>
We keep a chain_hash in struct daemon, becayse otherwise we end up with
`&peer->daemon->rstate->chainparams->genesis_blockhash` which is a bit
ridiculous.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids some very ugly switch() statements which mixed the two,
but we also take the chance to rename 'towire_gossip_' to
'towire_gossipd_' for those inter-daemon messages; they're messages to
gossipd, not gossip messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Messages from a peer may be invalid in many ways: we send an error
packet in that case. Rather than internally calling peer_error,
however, we make it explicit by having the handle_ functions return
NULL or an error packet.
Messages from the daemon itself should not be invalid: we log an error
and close the fd to them if it is. Previously we logged an error but
didn't kill them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If another channel has set the optional `htlc_maximum_msat` field,
we should correctly parse that field and respect it when drawing up
routes for payments.
And use ARRAY_SIZE() everywhere which will break compile if it's not a
literal array, plus assertions that it's the same length.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do this a lot, and had boutique helpers in various places. So add
a more generic one; for convenience it returns a pointer to the new
end element.
I prefer the name tal_arr_expand to tal_arr_append, since it's up to
the caller to populate the new array entry.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have a lot of infrastructure to delay local channel_updates to
avoid spamming on each peer reconnect; we had to keep tracking of
pending ones though, in case we needed the very latest for sending an
error when failing an HTLC.
Instead, it's far simpler to set the local_disabled flag on a channel
when we disconnect, but only send a disabling channel_update if we
actually fail an HTLC.
Note: handle_channel_update() TAKES update (due to tal_arr_dup), but we
didn't use that before. Now we do, add annotation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We trade channel_update before channel_announce makes the channel
public, and currently forget them when we finally get the
channel_announce. We should instead apply them, and not rely on
retransmission (which we remove in the next patch!).
This earlier channel_update means test_gossip_jsonrpc triggers too
early, so have that wait for node_announcement.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's simpler and more robust to just check that it's not yet announced
(the broadcast index will be 0).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
BOLT 7's been updated to split the flags field in `channel_update`
into two: `channel_flags` and `message_flags`. This changeset does the
minimal necessary to get to building with the new flags.
If we receive a channel_announce but not a channel_update, we store the announce
but don't put it in the broadcast map.
When we delete a channel, we check if the node_announcement broadcast
now preceeds all channel_announcements, and if so, we move it to the
end of the map. However, with a channel_announcement at index '0',
this test fails.
This is at least one potential cause of the node map getting out of order.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These happen after we compact the store; every log I've seen of a
restart on a real node has a message about truncating the store,
because node_announcements predate channel_announcements.
I extracted one such case from testnet, and reduced it to test here.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As pointed out by @rustyrussell the capacity is now always defined, so we can
fold that into the construction of the channel itself.
Reported-by: Rusty Russell <@rustyrussell>
Signed-off-by: Christian Decker <@cdecker>
Rusty Russell
Christian Decker
Michael Schmoock
lisa neigut