Changelog-Changed: `fundchannel_cancel` will now succeed even when executed while a `fundchannel_complete` is ongoing; in that case, it will be considered as cancelling the funding *after* the `fundchannel_complete` succeeds.
Let me introduce the concept of "Sequential Consistency":
All operations on parallel processes form a single total order agreed upon by all processes.
So for example, suppose we have parallel invocations of `fundchannel_complete` and `fundchannel_cancel`:
+--[fundchannel_complete]-->
|
--[fundchannel_start]-+
|
+--[fundchannel_cancel]---->
What "Sequential Consistency" means is that the above parallel operations can be serialized as a single total order as:
--[fundchannel_start]--[fundchannel_complete]--[fundchannel_cancel]-->
Or:
--[fundchannel_start]--[fundchannel_cancel]--[fundchannel_complete]-->
In the first case, `fundchannel_complete` succeeds, and the `fundchannel_cancel` invocation also succeeds, sending an `error` to the peer to make them forget the chanel.
In the second case, `fundchannel_cancel` succeeds, and the succeeding `fundchannel_complete` invocation fails, since the funding is already cancelled and there is nothing to complete.
Note that in both cases, `fundchannel_cancel` **always** succeeds.
Unfortunately, prior to this commit, `fundchannel_cancel` could fail with a `Try fundchannel_cancel again` error if the `fundchannel_complete` is ongoing when the `fundchannel_cancel` is initiated.
This violates Sequential Consistency, as there is no single total order that would have caused `fundchannel_cancel` to fail.
This commit is a minimal patch which just reschedules `fundchannel_cancel` to occur after any `fundchannel_complete` that is ongoing.
I noticed the following in logs for tests/test_connection.py::test_feerate_stress:
```
DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Failing HTLC 18446744073709551615 due to peer death
DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: local_routing_failure: 8194 (WIRE_TEMPORARY_NODE_FAILURE)
```
This is because it reports the (transient) node_failure error, because
our channel_failure message is incomplete. Fix this wart up.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we don't wait for close tx to reach mempool, it might not get to
depth 100, and we don't get 'onchaind complete, forgetting peer'.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously we've used the term 'funder' to refer to the peer
paying the fees for a transaction; v2 of openchannel will make
this no longer true. Instead we rename this to 'opener', or the
peer sending the 'open_channel' message, since this will be universally
true in a dual-funding world.
The new `keysend` plugin modifies the node features that we send to
peers. This commit breaks out the 'expected_features' we use for tests
to encompass this differentiation.
Sending update_fee immediately after channel establishment seems to
upset LND, so work around it by deferring it. The reason we increase
the fee after establishment is because now we might need to close the
channel in a hurry due to htlcs, but until there are htlcs that's
unnecessary.
Fixes: #3596
Changelog-Changed: Added workaround for lnd rejecting our commitment_signed when we send an update_fee after channel confirmed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that now we check capacity once we've figured out which peer, which
broke a test (we returned "unknown peer" instead of "capacity exceeded"),
so we rework that too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A CONSERVATIVE/3 target for them.
Some noisy changes to the tests as we had to update the estimatesmartfee
mock.
Changelog-Changed: We now use a higher feerate for resolving onchain HTLCs and for penalty transactions
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: JSON: `fundchannel` and `fundchannel_start` `satoshi` parameter removed (renamed to `amount` in 0.7.3).
Add new check if we're funder trying to add HTLC, keeping us
with enough extra funds to pay for another HTLC the peer might add.
We also need to adjust the spendable_msat calculation, and update
various tests which try to unbalance channels. We eliminate
the now-redundant test_channel_drainage entirely.
Changelog-Fixed: Corner case where channel could become unusable (https://github.com/lightningnetwork/lightning-rfc/issues/728)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
restrict fundchannel_cancel usage to only the opener side
Changelog-Changed: Only the opener of a fundchannel can cancel the channel open with fundchannel_cancel
it's that time of year (merry xmas!)
enables the ability to push_msat on fundchannel
Changelog-Added: RPC: `fundchannel` and `fundchannel_start` can now accept an optional parameter, `push_msat`, which will gift that amount of satoshis to the peer at channel open.
We still close the channel if we *send* an error, but we seem to have hit
another case where LND sends an error which seems transient, so this will
make a best-effort attempt to preserve our channel in that case.
Some test have to be modified, since they don't terminate as they did
previously :(
Changelog-Changed: quirks: We'll now reconnect and retry if we get an error on an established channel. This works around lnd sending error messages that may be non-fatal.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is an intermediary step: we still don't save it to the database,
but we do use the fee_states struct to track it internally.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The spec is (RSN!) going to explicitly denote where each feature should
be presented, so create that infrastructure.
Incorporate the new proposed bolt11 features, which need this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: .lightningd plugins and files moved into <network>/ subdir
Changelog-changed: WARNING: If you don't have a config file, you now may need to specify the network to lightning-cli
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rounds out the application of `upfront_shutdown_script`, allowing
an accepting node to specify a close_to address.
Prior to this, only the opening node could specify one.
Changelog-Added: Plugins: Allow the 'accepter' to specify an upfront_shutdown_script for a channel via a `close_to` field in the openchannel hook result
Spaces just make life a little harder for everyone.
(Plus, fix documentation: it's 'jsonrpc' not 'json' subsystem).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This simplifies our tests, too, since we don't need a magic option to
enable io logging in subdaemons.
Note that test_bad_onion still takes too long, due to a separate minor
bug, so that's marked and left dev-only for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Printed form is always "[<nodeid>-]<prefix>: <string>"
2. "jcon fd %i" becomes "jsonrpc #%i".
3. "jsonrpc" log is only used once, and is removed.
4. "database" log prefix is use for db accesses.
5. "lightningd(%i)" becomes simply "lightningd" without the pid.
6. The "lightningd_" prefix is stripped from subd log prefixes, and pid removed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Logging: formatting made uniform: [NODEID-]SUBSYSTEM: MESSAGE
Changelog-removed: `lightning_` prefixes removed from subdaemon names, including in listpeers `owner` field.
A log can have a default node_id, which can be overridden on a per-entry
basis. This changes the format of logging, so some tests need rework.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If a 'upfront_shutdown_script' was specified, show the address +
scriptpubky in `listpeers`
Changelog-added: JSON API: `listpeers` channels now include `close_to` and `close_to_addr` iff a `close_to` address was specified at channel open
Reduce test_feerate_stress iterations, and simply don't run
test_pay_retry under VALGRIND with SLOW_MACHINE at all.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A long time ago (93dcd5fed7), I
simplified the htlc reload code so it adjusted the amounts for HTLCs
in id order. As we presumably allowed them to be added in that order,
this avoided special-casing overflow (which was about to deliberately
be made harder by the new amount_msat code).
Unfortunately, htlc id order is not canonical, since htlc ids are
assigned consecutively in both directions! Concretely, we can have two HTLCs:
HTLC #0 LOCAL->REMOTE: 500,000,000 msat, state RCVD_REMOVE_REVOCATION
HTLC #0 REMOTE->LOCAL: 10,000 msat, state SENT_ADD_COMMIT
On a new remote-funded channel, in which we have 0 balance, these
commits *only* work in this order. Sorting by HTLC ID is not enough!
In fact, we'd have to worry about redemption order as well, as that
matters.
So, regretfully, we offset the balances halfway to UINT64_MAX, then check
they didn't underflow at the end. This loses us this one sanity check,
but that's probably OK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Feerate changes are asymmetric, as they can only be sent by the funder.
For FUNDER, the remote feerate is set when upon send of
commitment_signed, and the local feerate is set on receipt of
revoke_and_ack.
For non-funder, the local feerate is set on receipt of
commitment_signed, and the remote feerate set on send of
revoke_and_ack. In our code, these two happen together.
channeld gets this right, but lightningd ignored the funder/fundee
distinction, and as a result, receipt of a commitment_signed by the
funder altered fees in the database. If there was a reconnection
event or restart, then these (incorrect) values would be used, causing
us to complain about a 'Bad commit_sig signature' and close the
channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A 'Bad commit_sig signature' was reported by @Javier on Telegram and
@DarthCoin. This was between two c-lightning peers, so definitely our fault.
Analysis of this message revealed the signature was using the wrong
feerate. I finally managed to make a test case which triggered this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Check behavior for user supplied upfront_shutdown_script via close_to
Header from folded patch 'fix__return__not__iff_well_close_to_the_provided_addr.patch':
fix: return not iff we'll close to the provided addr
This is mainly an internal-only change, especially since we don't
offer any globalfeatures.
However, LND (as of next release) will offer global features, and also
expect option_static_remotekey to be a *global* feature. So we send
our (merged) feature bitset as both global and local in init, and fold
those bitsets together when we get an init msg.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It sometimes fail with a bad_gossip error because the sending node
might not have found out about the channel when it gets a
channel_update. Make sure the whole network knows everything before
we start.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
niftynei
ZmnSCPxj jxPCSnmZ
Christian Decker
Rusty Russell
darosior
Michael Schmoock
trueptolemy