Fixing the following error by changing 'enum feerate' to int.
lightningd/bitcoind.c:183:29: error: result of comparison of constant
8 with expression of type 'enum feerate' is always true [-Werror,
-Wtautological-constant-out-of-range-compare]
for (enum feerate f = 0; f < NUM_FEERATES; f++) {
Changelog-Fixed: compile error on macos
Changelog-Deprecated: plugin: `bcli` replacements should note that `sendrawtransaction` now has a second required Boolean argument, `allowhighfees`, which if `true`, means ignore any fee limits and just broadcast the transaction. Use `--deprecated-apis` to use older `bcli` replacement plugins that only support a single argument.
The symptom (under heavy load and valgrind) in test_plugin_command:
lightningd: common/json_stream.c:237: json_stream_output_: Assertion `!js->reader' failed.
This is because we try to call `getmanifest` again on `pay` which has not yet
responded to init.
The minimal fix for this is to keep proper state, so we can tell the
difference between "not yet called getmanifest" and "not yet finished
init".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This in addition removes the init fixed timeout hack.
Changelog-fixed: We now *always* die if our Bitcoin backend failed unexpectedly.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
This adapts our fee estimations requests to the Bitcoin backend to the
new semantic, and batch the requests.
This makes our request for fees much simpler, and leaves some more
flexibility for a plugin to do something smart (it could still lie before
but now it's explicit, at least.) as we don't explicitly request
estimation for a specific mode and a target.
Changelog-Changed: We now batch the requests for fee estimation to our Bitcoin backend.
Changelog-Changed: We now get more fine-grained fee estimation from our Bitcoin backend.
This avoids the getblockhash+getblock, and more importantly that was the
last functionality making use of bitcoind_getrawblock() and bitcoin_getblockhash(),
so we can also get rid of them.
This adds `getchaininfo` and `getrawblockbyheight` handling lightningd-side,
and use them in setup_topology().
We then remove legacy bitcoind_getblockcount() (we already get the count in
`getchaininfo`), bitcoind_getblockchaininfo() (it was only used in setup_topology()),
and wait_for_bitcoind() (this was specific to bitcoin-core and we assume our Bitcoin
backend to be functional if the plugin responds to `init`).
This leads to all sorts of problems; in particular it's incredibly
slow (days, weeks!) if bitcoind is a long way back. This also changes
the behaviour of a rescan argument referring to a future block: we will
also refuse to start in that case, which I think is the correct behavior.
We already ignore bitcoind if it goes backwards while we're running.
Also cover a false positive memleak.
Changelog-Fixed: If bitcoind goes backwards (e.g. reindex) refuse to start (unless forced with --rescan).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's less helpful, sure, but it's far better than someone
sending me their output and leaking this information.
Fixes: #3242
Reported-by: @JavierRSobrino
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently the only source for amount_asset is the value getter on a tx output,
and we don't hand it too far around (mainly ignoring it if it isn't the
chain's main currency). Eventually we could bubble them up to the wallet, use
them to select outputs or actually support assets in the channels.
Since we don't hand them around too widely I thought it was ok for them to be
pass-by-value rather than having to allocate them and pass them around by
reference. They're just 41 bytes currently so the overhead should be ok.
Signed-off-by: Christian Decker <@cdecker>
During sync it is highly likely that we can coalesce multiple calls and share
results among them. We also report back failures for non-existing blocks early
on, so we don't run into issues with blocks that our bitcoind doesn't have
yet.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Instead of allowing all calls to `getfilteredblock` to be scheduled on the
`bitcoind` queue right away we instead add them in a separate queue, and
process a single call at a time. This limits the concurrency and avoids
thrashing `bitcoind`. At the same time we dispatch incoming results back to
all calls that were queued for that particular blockheight, reducing the
overall number of calls and an increase in overall speed.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We will be calling the callback out of order once we fan out the results of a
single lookip to multiple calls, so being sure that everything is allocated
ahead of time is necessary.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Since we now check all P2WSH outputs in a block, this is getting quite a
common occurence, so logging just produces lots of noise.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This will eventually replace the multi-step `getblockhash` + `getblock` +
`gettxout` mechanism, and return entire filtered blocks which can be added to
the DB, and represent the full set of P2WSH UTXOs.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
At the moment we simply get a crypto log line on exit:
bitcoin-cli getblockchaininfo: invalid response
Fixes: 6deed77d88
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
At the beginning of the lightningd, we use "echo" command to check if bitcoin-cli is running.
Now we raplace "echo" with "getblockchaininfo" for this check, and also check whether the "chain" field in response is same as the blockchain that lightningd is on.
"getblockchaininfo" is also valid for litecoin-cli.
1. bcli_args_direct() will be used in wait_for_bitcoind;
At the beginning, we check if bitcoin-cli is running by "echo" command
whitout any bitcoin_cli struction. If this first command fails, we need
present the agrs gathered, like "-rpcuser", like "-rpcpassword".
Related changes include:
i) rename bcli_args() to bcli_args_direct(), and use 'const char **'
as the paramater for bcli_args_direct();
ii) add a new function bcli_args() warpped on bcli_args_direct(), this
warpping can reduce the large number of changes later in the file;
2. bcli_args() warpping on bcli_args_direct() is used like original.
Direct leak of 1024 byte(s) in 2 object(s) allocated from:
#0 0x7f4c84ce4448 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10c448)
#1 0x55d11b782c96 in timer_default_alloc ccan/ccan/timer/timer.c:16
#2 0x55d11b7832b7 in add_level ccan/ccan/timer/timer.c:166
#3 0x55d11b783864 in timer_fast_forward ccan/ccan/timer/timer.c:334
#4 0x55d11b78396a in timers_expire ccan/ccan/timer/timer.c:359
#5 0x55d11b774993 in io_loop ccan/ccan/io/poll.c:395
#6 0x55d11b72322f in plugins_init lightningd/plugin.c:1013
#7 0x55d11b7060ea in main lightningd/lightningd.c:664
#8 0x7f4c84696b6a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x26b6a)
To fix this, we actually make 'ld->timers' a pointer, so we can clean
it up last of all. We can't free it before ld, because that causes
timers to be destroyed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to do it in various places, but we shouldn't do it lightly:
the primitives are there to help us get overflow handling correct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christian and I both unwittingly used it in form:
*tal_arr_expand(&x) = tal(x, ...)
Since '=' isn't a sequence point, the compiler can (and does!) cache
the value of x, handing it to tal *after* tal_arr_expand() moves it
due to tal_resize().
The new version is somewhat less convenient to use, but doesn't have
this problem, since the assignment is always evaluated after the
resize.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are only supposed to be used when you want the token contents including
surrounding "". We should use this when reporting errors, but usually
we just want to access the tok members directly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Moller40
ZmnSCPxj jxPCSnmZ
Sebastian Falbesoner
Antoine Poinsot
Vasil Dimov
Christian Decker
trueptolemy
Jeff Vandrew Jr
nicolas.dorier