No more sending "all-channel" errors; in particular, gossipd now only
sends warnings (which make us hang up), not errors, and peer_connected
rejections are warnings (and disconnect), not errors.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Plugins: `peer_connected` rejections now send a warning, not an error, to the peer.
Prior to this, all reconnect logic lived in channeld. If you
disconnected before we finished building a funding transaction, that was
no big deal. Now, however, we're waiting for the funding to lock in in
dualopend, instead of handing straight to channeld to wait.
So we need a way to restart dualopend.
This reverts commit c239a7161b.
The goal of c239a716 was to reduce the memory footprint of our
internal UTXO set tracking, and testing against the sqlite3 backend
showed no performance impact. We have since found that the added
roundtrips to the DB server with postgres was having a considerable
performance impact, and backups would also bloat due to the increased
number of queries.
Undoing this change skips the noop updates that were causing this
regression.
Changelog-Fixed: db: Fixed a performance regression during block sync, resulting in many more queries against the DB than necessary.
This allows us to mark an offer used when an invoice derived from it
is paid, and importantly, avoid any other invoices for the offer being
paid.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Still asserts that it's the standard size, but makes it a dynamic
member. For simpliciy, changes the parse_onionpacket API (it must be
a tal object now, so we might as well allocate it here to catch all
the callers).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's actually a (very unlikely) race here: we would previously have
crashed with an assertion in invoices_resolve.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Avoids much cut & paste. Some tests don't need any of it, but most
want at least some of this infrastructure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds a `state_change` 'cause' to a channel.
A 'cause' is some initial 'reason' a channel was created or closed by:
/* Anything other than the reasons below. Should not happen. */
REASON_UNKNOWN,
/* Unconscious internal reasons, e.g. dev fail of a channel. */
REASON_LOCAL,
/* The operator or a plugin opened or closed a channel by intention. */
REASON_USER,
/* The remote closed or funded a channel with us by intention. */
REASON_REMOTE,
/* E.g. We need to close a channel because of bad signatures and such. */
REASON_PROTOCOL,
/* A channel was closed onchain, while we were offline. */
/* Note: This is very likely a conscious remote decision. */
REASON_ONCHAIN
If a 'cause' is known and a subsequent state change is made with
`REASON_UNKNOWN` the preceding cause will be used as reason, since a lot
(all `REASON_UNKNOWN`) state changes are a subsequent consequences of a prior
cause: local, user, remote, protocol or onchain.
Changelog-Added: Plugins: Channel closure resaon/cause to channel_state_changed notification
For compatibility, we only do this if `allow-deprecated-apis` is false
for now. Otherwise scripts parsing should use `grep -v '^# '` or
start using `-N none`.
Changelog-Added: JSON-RPC: `close` now sends notifications for slow closes (if `allow-deprecated-apis`=false)
Changelog-Deprecated: cli: scripts should filter out '^# ' or use `-N none`, as commands will start returning notifications soon
Fixes: #3925
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need the PSBT to create the finalized tx from once the peer's
tx_signatures are received. Since we're passing the PSBT, we no longer
need the secondary message to be passed, as it was derived from the
PSBT.
Also removes now unused witness serialization code
This notification will be raised whenever a channel state changes.
The payload includes the channel and peer identifiers and the
old and the new state.
Example payload:
```
{
"channel_state_changed": {
"peer_id": "03bc9337c7a28bb784d67742ebedd30a93bacdf7e4ca16436ef3798000242b2251",
"channel_id": "a2d0851832f0e30a0cf778a826d72f077ca86b69f72677e0267f23f63a0599b4",
"short_channel_id" : "561820x1020x1",
"old_state": "CHANNELD_NORMAL",
"new_state": "AWAITING_UNILATERAL"
}
}
```
Changelog-Added: Plugins: channel_state_changed notification
Greatly simplify the changeset API. Instead of 'diff' we simply generate
the changes.
Also pulls up the 'next message' method, as at some point the
interactive tx protocol will be used for other things as well
(splices/closes etc)
Suggested-By: @rustyrussell
v2 of channel establishment, in the accpeter case, now sends 2 messages
to our peer after saving the information to disk (our commitment
signatures and our funding transaction signatures)
v2 channel open uses a different method to derive the channel_id, so now
we save it to the database so that we dont have to remember how to
derive it for each.
includes a migration for existing channels
We're going to want this for bolt13 formation as well.
As a result of reworking the logic into "candidate selection" then
"route hint selection", we need to change the way round-robin works.
We use a simple incrementing index now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This removes the reservation cleanup at startup, too, now they're all
using 'reserved_til'.
This changes test_withdraw, since it asserted that outputs were marked
spent as soon as we broadcast a transaction: now they're reserved until
it's mined. Similarly, test_addfunds_from_block assumed we'd see funds
as soon as we broadcast the tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` now randomizes input and output order, not BIP69.
We create ALL_PROGRAMS, ALL_TEST_PROGRAMS, ALL_C_SOURCES and
ALL_C_HEADERS. Then the toplevel Makefile knows which are
autogenerated (by wildcard), so it can have all the rules to clean
them or check the source as necessary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that other directories were explicitly depending on the generated
file, instead of relying on their (already existing) dependency on
$(LIGHTNINGD_HSM_CLIENT_OBJS), so we remove that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means some files get renamed, and I took the opportunity to clarify
our naming (the *d* is important!)
1. channeld/channel_wire.csv -> channeld/channeld_wire.csv
2. channeld/gen_channel_wire.h -> channeld/channeld_wiregen.h
3. enum channel_wire_type -> enum channeld_wire
4. WIRE_CHANNEL_FUNDING_DEPTH -> WIRE_CHANNELD_FUNDING_DEPTH.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to remember this in the db (it's a P2WSH for option_anchor_outputs),
and we need to set nSequence to 1 to spend it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is best done by passing `struct bitcoin_signature` around instead
of raw signatures. We still save raw sigs to the db, and of course the
wire protocol uses them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
HTLC fees increase (larger weight), and the fee paid by the opener
has to include the anchor outputs (i.e. 660 sats).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
the way we use PSBTs to sign things requires that we have the
scriptpubkey available on the utxo so we can populate the witness-utxo
field with it.
this causes problems if we don't already have the scriptpubkey cached in
the database, as in *some* cases we require a round trip to the HSM to
populate them
to get over this hump, we backfill any and all missing scriptpubkey
information for the utxo's that we hold in our wallet.
this will allow us to clean up the NULL handling of missing
scriptpubkeys.
we're about to add a migration that requires access to the bip32_key
in order to calculate missing scriptpubkeys.
prior to this patch, we don't have access to the bip32 key in the db
migration, as it's set on the wallet but after the db migrations are
run.
here we patch it through so that every migration can access it
We update the `last_tx` in `channels` to be psbt format, instead
of a linearized transaction.
We need the amount of the input populated, which we have since
this is the 'funding' amount. Ideally we'd also populate the funding
scriptPubkey, but to do that we'd need to access the HSM module to fetch
our local funding pubkey, which isn't initialized at the time that the
database migrations are run.
Since the only field the HSM uses currently when signing these is the
amount field, it's ok to just leave it out.
needs a test!
We did not take the value of --commit-fee into account : this removes
the unused option from lightningd and instead registers it in bcli,
where we set the actual feerate of commitment transactions. This also
corrects the documentation.
Changelog-Fixed: config: we now take the --commit-fee parameter into account.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
Since we now over-write the wally malloc/free functions, we need to do
so for tests as well. Here we pull up all of the common setup/teardown
logic into a separate place, and update the tests that use libwally to
use the new common_setup core
Changelog-None
Previously we were annotating every movement with the blockheight of
lightningd at notification time. Which is lossy in terms of info, and
won't be helpful for reorg reconciliation. Here we switch over to
logging chain moves iff they've been confirmed.
Next PR will fix this up for withdrawals, which are currently tagged
with a blockheight of zero, since we log on successful send.
Rusty Russell
niftynei
Christian Decker
Michael Schmoock
ZmnSCPxj jxPCSnmZ
Antoine Poinsot