We're rarely in a hurry here, and bitcoind is aggressive with fees.
You can always spend this output if you really have to, using CPFP.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: mutual closing feerate reduced to "slow" to avoid overpaying.
Too trivial a fix to really list in Changelog, but I noticed that we
specified "wumbo" twice. We should really just use the proper name
in listconfigs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This removes the reservation cleanup at startup, too, now they're all
using 'reserved_til'.
This changes test_withdraw, since it asserted that outputs were marked
spent as soon as we broadcast a transaction: now they're reserved until
it's mined. Similarly, test_addfunds_from_block assumed we'd see funds
as soon as we broadcast the tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` now randomizes input and output order, not BIP69.
These tests appear in both test_misc.py and test_wallet.py.
I checked, and they're the only duplcates; they were moved in
0543149b89 then re-added (merge error?)
in 67fc8ffbcf.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
First, simplify: amount is set to 1000000, but then we deposit 1000000 + 0.01btc
(i.e. 2000000), and we always use 2 * amount. Just use a single constant to
make it clear.
Secondly, we assume that the wallet considers outputs spent as soon as
we created the tx: this will not be true once withdraw uses sendpsbt.
So, we generate blocks, but now sometimes withdraw will pick up change
txs, so we need to reserve them to avoid that messing our coinmovements.
Finally, we assumed the withdrawl order was BIP69, which becomes
variable.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
With a feerate of 7500perkw and subtracting 660 sats for anchors, a
20,000 sat channel has capacity about 9800 sat, below our default:
You gave bad parameters: channel capacity with funding 20000sat, reserves 546sat/546sat, max_htlc_value_in_flight_msat is 18446744073709551615msat, channel capacity is 9818sat, which is below 10000000msat
So bump channel amounts.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Anchor outputs break many assumptions in our tests:
1. Remove some hardcoded numbers in favor of a fee calc, so we only have to
change in one place.
FIXME: This should also be done for elements!
2. Do binary search to get feerate for a given closing fee.
3. Don't assume output #0: anchor outputs perturb them.
4. Don't assume we can make 1ksat channels (anchors cost 660 sats!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I started replacing all get_node() calls, but got bored, so then just did the
tests which call get_node() 3 times or more.
Ends up not making a measurable speed difference, but it does make some
things neater and more standard.
Times with SLOW_MACHINE=1 (given that's how Travis tests):
Time before (non-valgrind):
393 sec (had 3 failures?)
Time after (non-valgrind):
410 sec
Time before (valgrind):
890 seconds (had 2 failures)
Time after (valgrind):
892 sec
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: New option `--important-plugin` loads a plugin is so important that if it dies, `lightningd` will exit rather than continue. You can still `--disable-plugin` it, however, which trumps `--important-plugin` and it will not be started at all.
Technically an API break, but nobody relies on these I hope!
Note that the feerates warning was buried inside the style object:
it should be top-level.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This commit collects the changes required to the tests caused by the changes
to the `pay` and `paystatus` commands. They are also rather good hints as to
what these changes entail.
These are pulled from wallet/wallet.c, with the fix now that we grind sigs.
This reduces the fees we pay slightly, as you can see in the coinmoves changes.
I now print out all the coin moves in suitable format before we match:
you only see this if the test fails, but it's really helpful.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
By setting nLocktime to the current block, the reorg test
"test_funding_reorg_remote_lags" actually drops the funding transaction
entirely when a reorg happens.
Except the 1 in 10 cases where nLocktime is randomly set to 1-10
blocks earlier.
This implies, strongly, that we hit "restart" too often on Travis.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are various places where our tests failed with
--enable-expimental-features. And our plugin test overlapped an
existing feature.
We make our expected_feature functions more generic, and use them
everywhere.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Much nicer for grepping, since `{ "foo": { "bar": [7] } }` is turned into
`foo.bar[0]=7`.
Changelog-Added: cli: New `--flat` mode for easy grepping.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
-H removes the top-level if there's only one, and 'format-hint'
breaks this heuristic, so we end up with:
```
help=command=autocleaninvoice [cycle_seconds] [expired_by]
category=plugin
description=Set up autoclean of expired invoices.
verbose=Perform cleanup every {cycle_seconds} (default 3600), or disable autoclean if 0. Clean up expired invoices that have expired for {expired_by} seconds (default 86400).
command=check command_to_check
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This moves the notification for our coin spends from when it's
successfully submited to the mempool to when they're confirmed in a
block.
We also add an 'informational' notice tagged as `spend_track` which
can be used to track which transaction a wallet output was spent in.
A CONSERVATIVE/3 target for them.
Some noisy changes to the tests as we had to update the estimatesmartfee
mock.
Changelog-Changed: We now use a higher feerate for resolving onchain HTLCs and for penalty transactions
This is to prepare for dynamic features, including making plugins first
class citizens at setting them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adapts our fee estimations requests to the Bitcoin backend to the
new semantic, and batch the requests.
This makes our request for fees much simpler, and leaves some more
flexibility for a plugin to do something smart (it could still lie before
but now it's explicit, at least.) as we don't explicitly request
estimation for a specific mode and a target.
Changelog-Changed: We now batch the requests for fee estimation to our Bitcoin backend.
Changelog-Changed: We now get more fine-grained fee estimation from our Bitcoin backend.
We kept track of an URGENT, a NORMAL, and a SLOW feerate. They were used
for opening (NORMAL), mutual (NORMAL), UNILATERAL (URGENT) transactions
as well as minimum and maximum estimations, and onchain resolution.
We now keep track of more fine-grained feerates:
- `opening` used for funding and also misc transactions
- `mutual_close` used for the mutual close transaction
- `unilateral_close` used for unilateral close (commitment transactions)
- `delayed_to_us` used for resolving our output from our unilateral close
- `htlc_resolution` used for resolving onchain HTLCs
- `penalty` used for resolving revoked transactions
We don't modify our requests to our Bitcoin backend, as the next commit
will batch them !
Changelog-deprecated: The "urgent", "slow", and "normal" field of the `feerates` command are now deprecated.
Changelog-added: The fields "opening", "mutual_close", "unilateral_close", "delayed_to_us", "htlc_resolution" and "penalty" have been added to the `feerates` command.
ChangeLog-Added: New `getsharedsecret` command, which lets you compute a shared secret with this node knowing only a public point. This implements the BOLT standard of hashing the ECDH point, and is incompatible with ECIES.
Instead of saving a stripped_update, we use the new
local_fail_in_htlc_needs_update.
One minor change: we return the more correct
towire_temporary_channel_failure when the node is still syncing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For bitcoind_fail_first:
We only ever send `getblock` if we got a successful block hash from
`getblockhash`, and if we can't get the block in that case it means
our Bitcoin backend is faulty and we shouldnt continue.
So, mock `getblockhash` instead, which is authorized to spuriously fail.
For both bitcoind_fail_first and bitcoind_failure:
Adapt the logs.
1. We asserted that there wouldn't be a raw failcode.
2. We didn't pass the failure information via JSON in this case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
niftynei
Rusty Russell
Jan Sarenik
Christian Decker
ZmnSCPxj jxPCSnmZ
Antoine Poinsot