Save some overhead, plus gets us ready for giving subdaemons direct
store access. This is the first time we *upgrade* the gossip_store,
rather than just discarding.
The downside is that we need to add an extra message after each
channel_announcement, containing the channel capacity.
After:
store_load_msec:28337-30288(28975+/-7.4e+02)
vsz_kb:582304-582316(582306+/-4.8)
store_rewrite_sec:11.240000-11.800000(11.55+/-0.21)
listnodes_sec:1.800000-1.880000(1.84+/-0.028)
listchannels_sec:22.690000-26.260000(23.878+/-1.3)
routing_sec:2.280000-9.570000(6.842+/-2.8)
peer_write_all_sec:48.160000-51.480000(49.608+/-1.1)
Differences:
-vsz_kb:582320
+vsz_kb:582316
-listnodes_sec:2.100000-2.170000(2.118+/-0.026)
+listnodes_sec:1.800000-1.880000(1.84+/-0.028)
-peer_write_all_sec:51.600000-52.550000(52.188+/-0.34)
+peer_write_all_sec:48.160000-51.480000(49.608+/-1.1)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we can benchmark, and remove 500 bytes per node.
MCP results from 5 runs, min-max(mean +/- stddev):
store_load_msec:35093-37907(36146+/-1.1e+03)
vsz_kb:555168
store_rewrite_sec:12.120000-13.750000(12.7+/-0.6)
listnodes_sec:1.270000-1.370000(1.322+/-0.039)
listchannels_sec:29.770000-31.600000(30.82+/-0.64)
routing_sec:0.00
peer_write_all_sec:63.630000-67.850000(65.432+/-1.7)
MCP notable changes from pre-Dijkstra (>1 stddev):
-vsz_kb:577456
+vsz_kb:555168
-routing_sec:60.70
+routing_sec:12.04
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If a route is too long, we try to bias Dijkstra towards choosing a
shorter route by adding a per-hop cost. We do a naive "shortest path"
pass, then using that cost as a ceiling on per-hop cost, we do a
binary search.
There are some subtleties: we use risk rather than total as our
counter field (we normally bias this by 1 anyway, so it's easy to make
that a variable), and we set riskfactor to a mimimal value once we're
iterating. It's good enough to get a solution, we don't need to do a
2-dimensional search on riskfactor and riskbias.
Of course, this is extremely slow if we hit it on our benchmark,
though it doesn't happen in a more realistic network:
$ gossipd/test/run-bench-find_route 100000 100:
Before:
100 (79 succeeded) routes in 100000 nodes in 25341 msec (253412314 nanoseconds per route)
After:
100 (100 succeeded) routes in 100000 nodes in 97346 msec (973461784 nanoseconds per route)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Use a uintmap as our minheap.
Note that Dijkstra can give overlength routes, so some checks are disabled.
Comparison using gossipd/test/run-bench-find_route 100000 10:
Before:
10 (10 succeeded) routes in 100000 nodes in 120087 msec (12008708402 nanoseconds per route)
After:
10 (10 succeeded) routes in 100000 nodes in 2269 msec (226925462 nanoseconds per route)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When we compact the store, we need to adjust the broadast index for
peers so they know where they're up to.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This requires some trickiness when we want to re-add unannounced channels
to the store after compaction, so we extract a common "copy_message" to
transfer from old store to new.
MCP results from 5 runs, min-max(mean +/- stddev):
store_load_msec:36034-37853(37109.8+/-5.9e+02)
vsz_kb:577456
store_rewrite_sec:12.490000-13.250000(12.862+/-0.27)
listnodes_sec:1.250000-1.480000(1.364+/-0.09)
listchannels_sec:30.820000-31.480000(31.068+/-0.24)
routing_sec:26.940000-27.990000(27.616+/-0.39)
peer_write_all_sec:65.690000-68.600000(66.698+/-0.99)
MCP notable changes from previous patch (>1 stddev):
-vsz_kb:1202316
+vsz_kb:577456
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is more compact, but also required once we replace the arbitrary
"index" with an actual offset into the gossip store. That will let us
remove the in-memory variants entirely.
MCP results from 5 runs, min-max(mean +/- stddev):
store_load_msec:35685-38538(37090.4+/-9.1e+02)
vsz_kb:2288768
store_rewrite_sec:35.530000-41.230000(37.904+/-2.3)
listnodes_sec:0.720000-0.810000(0.762+/-0.041)
listchannels_sec:30.750000-35.990000(32.704+/-2)
routing_sec:29.570000-34.010000(31.374+/-1.8)
peer_write_all_sec:51.140000-58.350000(55.69+/-2.4)
MCP notable changes from previous patch (>1 stddev):
-vsz_kb:2621808
+vsz_kb:2288768
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Don't turn them to/from pubkeys implicitly. This means nodeids in the store
don't get converted, but bitcoin keys still do.
MCP results from 5 runs, min-max(mean +/- stddev):
store_load_msec:33934-35251(34531.4+/-5e+02)
vsz_kb:2637488
store_rewrite_sec:34.720000-35.130000(34.94+/-0.14)
listnodes_sec:1.020000-1.290000(1.146+/-0.086)
listchannels_sec:51.110000-58.240000(54.826+/-2.5)
routing_sec:30.000000-33.320000(30.726+/-1.3)
peer_write_all_sec:50.370000-52.970000(51.646+/-1.1)
MCP notable changes from previous patch (>1 stddev):
-store_load_msec:46184-47474(46673.4+/-4.5e+02)
+store_load_msec:33934-35251(34531.4+/-5e+02)
-vsz_kb:2638880
+vsz_kb:2637488
-store_rewrite_sec:46.750000-48.280000(47.512+/-0.51)
+store_rewrite_sec:34.720000-35.130000(34.94+/-0.14)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I tried to just do gossipd, but it was uncontainable, so this ended up being
a complete sweep.
We didn't get much space saving in gossipd, even though we should save
24 bytes per node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This lets us benchmark without a valid blockchain.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'fixup!_gossipd__dev_option_to_allow_unknown_channels.patch':
fixup! gossipd: dev option to allow unknown channels.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Basically we tell it that every field ending in '_msat' is a struct
amount_msat, and 'satoshis' is an amount_sat. The exceptions are
channel_update's fee_base_msat which is a u32, and
final_incorrect_htlc_amount's incoming_htlc_amt which is also a
'struct amount_msat'.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a side-effect of using amount_msat in gossipd/routing.c, we explicitly
handle overflows and don't need to pre-prune ridiculous-fee channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We didn't populate the channels properly so it always failed.
Additionally, somewhere along the line we kept using the single scid
so we only created one channel.
Also, the next patch will start comparing the pubkeys, so make valid
ones: use an array so we don't affect the benchmark too much.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We keep a chain_hash in struct daemon, becayse otherwise we end up with
`&peer->daemon->rstate->chainparams->genesis_blockhash` which is a bit
ridiculous.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids some very ugly switch() statements which mixed the two,
but we also take the chance to rename 'towire_gossip_' to
'towire_gossipd_' for those inter-daemon messages; they're messages to
gossipd, not gossip messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The idea is that `plugin` is an early arg that is parsed (from command
line or the config file). We can then start the plugins and have them
tell us about the options they'd like to add to the mix, before we
actually parse them.
Signed-off-by: Christian Decker <@cdecker>
If another channel has set the optional `htlc_maximum_msat` field,
we should correctly parse that field and respect it when drawing up
routes for payments.
BOLT 7's been updated to split the flags field in `channel_update`
into two: `channel_flags` and `message_flags`. This changeset does the
minimal necessary to get to building with the new flags.
As pointed out by @rustyrussell the capacity is now always defined, so we can
fold that into the construction of the channel itself.
Reported-by: Rusty Russell <@rustyrussell>
Signed-off-by: Christian Decker <@cdecker>
We were adding channels without their capacity, and eventually annotated them
when we exchanged `channel_update`s. This worked as long as we weren't
considering the channel capacity, but would result in local-only channels to be
unusable once we start checking.
This lets detect if a node announce preceeds a channel announce once we
delete the node announcement.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is something which generally shouldn't happen, but we didn't
notice it previously.
We ignore this warning in the case where a channel was deleted: this
happens because one side can send an update while the other notices
that the channel is closed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note: this will break the gossip_store if they have current channels,
but it will fail to parse and be discarded.
Have local_add_channel do just that: the update is logically separate
and can be sent separately.
This removes the ugly 'bool add_to_store' flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. If we have a channel_announcement, the channel is public, otherwise
it's not. Not all channels are public, as they can be local: those
have a NULL channel_announcement.
2. If we don't have a channel_update, we know nothing about that half
of the channel, and no other fields are valid.
3. We can tell if a half channel is disabled by the flags field directly.
Note that we never send halfchannels without an update over
gossip_getchannels_reply so that marshalling/unmarshalling can be
vastly simplified.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Make the update/announce messages own the element in the broadcast map
not the other way around.
Then we keep a pointer to the message, and when we free it
(eg. channel closed, update replaces it), it gets freed from the
broadcast map automatically.
The result is much nicer!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Someone could try to announce an internal address, and we might probe
it.
This breaks tests, so we add '--dev-allow-localhost' for our tests, so
we don't eliminate that one. Of course, now we need to skip some more
tests in non-developer mode.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we open with O_APPEND, any write() will append as we want it to.
But we want to distinguish a new store creation from a truncation due
to bad version.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we only remember the actions that added channels then we'd restore them when
re-reading the gossip_store, so put a tombstone in there to remember to delete
it. These will be cleared upon re-writing the store since the announcements wont
be written anymore.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This stores and reads the channel_announcements in the wrapping message which
allows us to store associated data with the raw channel_announcements.
The gossip_store applies channel_announcements directly but it also returns it,
and it gets discarded as a duplicate. In the next commit we'll have gossip_store
apply all changes, bypassing verification, so the duplication is only temporary.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
As we add more features, the current code is insufficient.
1. Keep an array of single feature bits, for easy switching on and off.
2. Create feature_offered() which checks for both compulsory and optional
variants.
3. Invert requires_unsupported_features() and unsupported_features()
which tend to be double-negative, all_supported_features() and
features_supported().
4. Move single feature definition from wire/peer_wire.h to common/features.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We only access via index. We do, however, want to clean up when we
delete nodes and channels, so we tie lifetimes to that. This leads
us to put the index into 'struct queued_message'.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Christian Decker
lisa neigut
arowser
practicalswift