In several places we use low-level tal functions because we want the
label to be something other than the default. ccan/tal is adding
tal_*_label so replace them and shim it for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
tal_count() is used where there's a type, even if it's char or u8, and
tal_bytelen() is going to replace tal_len() for clarity: it's only needed
where a pointer is void.
We shim tal_bytelen() for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are three cases:
1. failcode is 0, scid is NULL, failreason is the onion to fwd.
2. failcode is non-zero, but UPDATE bit not set. scid is NULL, failreason NULL.
3. failcode has UPDATE bit set. scid is non-NULL, failreason is NULL.
Assert these on marshaling, and only send the parts we need so unmarshal is
always canonical.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The master tells us the short_channel_id of the outgoing channel when
failing an HTLC, but channeld didn't store it anywhere. It also
didn't tell channeld the short_channel_id in the case where we're
reconnecting and it's feeding us an array of failed htlcs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
That was the cause of the bad gossip order failures: gossipd thought our
channel was live, but the other end didn't receive message last time.
Now gossipd doesn't use fd to kill us (connectd tells master to do so), we
can implement read_peer_msg_nogossip().
Fixes: #1706
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Removed `json_get_params`.
Also added json_tok_percent and json_tok_newaddr. Probably should
have been a separate PR but it was so easy.
[ Squashed comment update for gcc workaround --RR ]
Signed-off-by: Mark Beckwith <wythe@intrig.com>
Often we only need a single secret, so it's clearer to have routines
to do just that. When we change to the lnd key scheme, there will be
no benefit in calculating them all together.
This also adds a test!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Well, it's generated by shachain, so technically it is a sha256, but
that's an internal detail. It's a secret.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I'm not completely convinced that it's only ever set to a failcode
with the BADONION bit set, especially after the previous patches in
this series. Now that channeld can handle arbitrary failcodes passed
this way, simply rename it.
We add marshalling assertions that only one of failcode and failreason
is set, and we unmarshal an empty 'fail' to NULL (just the the
generated unmarshalling code does).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is part of #1464 and incorporates Rusty's suggested updates from #1569.
See comment in param.h for description, here's the basics:
unsigned cltv;
const jsmntok_t *note;
u64 msatoshi;
struct param * mp;
if (!param_parse(cmd, buffer, tokens,
param_req("cltv", json_tok_number, &cltv),
param_opt("note", json_tok_tok, ¬e),
mp = param_opt("msatoshi", json_tok_u64, &msatoshi),
NULL))
return;
if (param_is_set(mp))
do_something()
There is a lot of developer mode code to make sure we don't make mistakes,
like trying to unmarshal into the same variable twice or adding a required param
after optional.
During testing, I found a bug (of sorts) in the current system. It allows you
to provide two named parameters with the same name without error; e.g.:
# cli/lightning-cli -k newaddr addresstype=p2sh-segwit addresstype=bech32
{
"address": "2N3r6fT65PhfhE1mcMS6TtcdaEurud6M7pA"
}
It just takes the first and ignores the second. The new system reports this as an
error for now. We can always change this later.
structeq() is too dangerous: if a structure has padding, it can fail
silently.
The new ccan/structeq instead provides a macro to define foo_eq(),
which does the right thing in case of padding (which none of our
structures currently have anyway).
Upgrade ccan, and use it everywhere. Except run-peer-wire.c, which
is only testing code and can use raw memcmp(): valgrind will tell us
if padding exists.
Interestingly, we still declared short_channel_id_eq, even though
we didn't define it any more!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a best effort attempt to skip connection attempts if we detect a broken
ISP resolver. A broken ISP resolver is a resolver that will replace NXDOMAIN
replies with a dummy response. This is best effort in that it'll only detect a
single fixed dummy reply, it'll check only on startup, and will not detect if we
switched networks. It should be good enough for most cases, and in the worst
case it will result in a connection attempt that does not complete.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Reported-by: Glenn Willen <@gwillen>
New codes: FUND_MAX_EXCEEDED, FUND_CANNOT_AFFORD, FUND_DUST_LIMIT_UNMET.
The error message "Cannot afford fee" was not exactly correct because
it would also occur if the amount requested could not be afforded. So
I changed it to the more generic "Cannot afford transaction".
Other things:
* Fixed off-by-one satoshi in fundchannel manpage.
* Changed 'arror' to 'error' because we are not pirates.
2018-06-14T01:09:03.495Z lightningd(23766): HSM: created new hsm_secret file
==23785== Syscall param socketcall.bind(my_addr.sin6_flowinfo) points to uninitialised byte(s)
==23785== at 0x5731877: bind (syscall-template.S:78)
==23785== by 0x11767C: make_listen_fd (gossip.c:2405)
==23785== by 0x117DA2: handle_wireaddr_listen (gossip.c:2558)
==23785== by 0x1183B7: setup_listeners (gossip.c:2653)
==23785== by 0x118E86: gossip_activate (gossip.c:2871)
==23785== by 0x11AC42: recv_req (gossip.c:3543)
==23785== by 0x143FF1: next_plan (io.c:59)
==23785== by 0x144AEE: do_plan (io.c:387)
==23785== by 0x144B2C: io_ready (io.c:397)
==23785== by 0x146719: io_loop (poll.c:310)
==23785== by 0x11B0B0: main (gossip.c:3687)
==23785== Address 0x1ffeffffa4 is on thread 1's stack
==23785== in frame #2, created by handle_wireaddr_listen (gossip.c:2539)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Until now, `command_fail()` reported an error code of -1 for all uses.
This PR adds an `int code` parameter to `command_fail()`, requiring the
caller to explicitly include the error code.
This is part of #1464.
The majority of the calls are used during parameter validation and
their error code is now JSONRPC2_INVALID_PARAMS.
The rest of the calls report an error code of LIGHTNINGD, which I defined to
-1 in `jsonrpc_errors.h`. The intention here is that as we improve our error
reporting, all occurenaces of LIGHTNINGD will go away and we can eventually
remove it.
I also converted calls to `command_fail_detailed()` that took a `NULL` `data`
parameter to use the new `command_fail()`.
The only difference from an end user perspecive is that bad input errors that
used to be -1 will now be -32602 (JSONRPC2_INVALID_PARAMS).
1. We need to test all bits, not all bytes.
2. Both local and global features need to be supported.
3. Untested code is broken code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tor wasn't actually working for me to connect to anything, but it worked
for 'ssh -D' testing.
Note that the resulting 'netaddr' is a bit weird, but I guess it's honest.
$ ./cli/lightning-cli connect 021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b
{
"id": "021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b"
}
$ ./cli/lightning-cli listpeers
{
"peers": [
{
"state": "GOSSIPING",
"id": "021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b",
"netaddr": [
"ln1qg0je0lugpzu5ttsv78vlrkhteyg9yy8fjw68qr57mfhsfyrxurzkq522ah.lseed.bitcoinstats.com:9735"
],
"connected": true,
"owner": "lightning_gossipd"
}
]
}
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is useful for the next patch, where we want to hand the unresolved
name through to the proxy.
This also addresses @Saibato's worry that we still called getaddrinfo()
(with the AI_NUMERICHOST option) even if we didn't want a lookup.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means it will effect connect commands too (though it's too
late to stop DNS lookups caused by commandline options).
We also warn that this is one case where we allow forcing through Tor
without a proxy set: it just means all connections will fail.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This takes the Tor service address in the same option, rather than using
a separate one. Gossipd now digests this like any other type.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For the moment, this is a straight handing of current parameters through
from master to the gossip daemon. Next we'll change that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently it's always for messages to peer: make that status_peer_io and
add a new status_io for other IO.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Risks leakage. We could do lookup via the proxy, but that's a TODO.
There's only one occurance of getaddrinfo (and no gethostbyname), so
we add a flag to the callers.
Note: the use of --always-use-proxy suppresses *all* DNS lookups, even
those from connect commands and the command line.
FIXME: An implicit setting of use_proxy_always is done in gossipd if it
determines that we are announcing nothing but Tor addresses, but that
does *not* suppress 'connect'.
This is fixed in a later patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And use it in wireaddr.
We fix up the double '.onion' in the test case, which seems like an error?
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Mark Beckwith
Mark Beckwith
Christian Decker
practicalswift