I decided to try a faster implementation, only to find our crc32c was
not correct! Ouch.
I removed the crc32c functions from ccan/crc, and added a new crc32c
module which has the Mark Adler x86-64-optimized variants.
We bump gossip_store version again, since csums have changed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is where payment tests should go. Also mark it xfail for the moment,
and remove developer-only tag (propagating gossip is only 60 seconds, which
is OK).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There were several gossip breakages in master; bumping version means
upgrades get a clean store (not just those upgrading from stable version).
Fixes: #2719
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We didn't count some records before, so we could compare the two counters.
This is much simpler, and avoids reliance on bs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we intercept the peer's gossip_timestamp_filter request
in the per-peer subdaemon itself. The rest of the semantics are fairly
simple however.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(We don't increment the gossip_store version, since there are only a
few commits since the last time we did this).
This lets the reader simply filter messages; this is especially nice since
the channel_announcement timestamp is *derived*, not in the actual message.
This also creates a 'struct gossip_hdr' which makes the code a bit
clearer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Keeping the uintmap ordering all the broadcastable messages is expensive:
130MB for the million-channels project. But now we delete obsolete entries
from the store, we can have the per-peer daemons simply read that sequentially
and stream the gossip itself.
This is the most primitive version, where all gossip is streamed;
successive patches will bring back proper handling of timestamp filtering
and initial_routing_sync.
We add a gossip_state field to track what's happening with our gossip
streaming: it's initialized in gossipd, and currently always set, but
once we handle timestamps the per-peer daemon may do it when the first
filter is sent.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use the high bit of the length field: this way we can still check
that the checksums are valid on deleted fields.
Once this is done, serially reading the gossip_store file will result
in a complete, ordered, minimal gossip broadcast. Also, the horrible
corner case where we might try to delete things from the store during
load time is completely gone: we only load non-deleted things.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're about to bump version again, and the code to upgrade it was
quite hairy (and buggy!). It's not worthwhile for such a
poorly-tested path: I will just add code to limit how much incoming
gossip we get to avoid flooding when we upgrade, however.
I also use a modern gossip_store version in our test_gossip_store_load
test, instead of relying on the upgrade path.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When we first receive a channel_update, we write both the
channel_announcement and that channel_update to the store: we need
that first update so we can set the channel_announcement timestamp.
However, the channel_update can be replaced later. This means we can
have a channel_announcement, a node_update which relies on it, then
the channel_update later.
So move the "this applies to a pending announcement" check lower, where
gossip_store can use it too. Has a nice side-effect of avoiding
one lookup of the node id.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
First, we should have a channel_update so we actually do some compaction!
(Reported-by @SimonVrouwe). But we should also handle the cases where:
1. A channel_announcement is *not* directly followed by a
channel_update (happens when the channel_update is replaced).
2. A node_announcement predates a channel_update for the peer
(again, can happen once a channel_update is replaced).
3. A local/private channel_creation is not directly followed by an
update.
In addition, we might as well check that we can *load* such a store,
before compaction.
This checks the corner cases which occur in real gossip stores.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's possible that it hasn't got the node_announcement messages;
it will still list the nodes, however (the channel_announcement tells
it the nodes exist). Check for the alias field instead.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
My raspberry pi node hung up on my other node:
lightning_openingd-... chan #1: Got bad message from gossipd: 0db1
This is because we didn't handle that message in one path.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Save some overhead, plus gets us ready for giving subdaemons direct
store access. This is the first time we *upgrade* the gossip_store,
rather than just discarding.
The downside is that we need to add an extra message after each
channel_announcement, containing the channel capacity.
After:
store_load_msec:28337-30288(28975+/-7.4e+02)
vsz_kb:582304-582316(582306+/-4.8)
store_rewrite_sec:11.240000-11.800000(11.55+/-0.21)
listnodes_sec:1.800000-1.880000(1.84+/-0.028)
listchannels_sec:22.690000-26.260000(23.878+/-1.3)
routing_sec:2.280000-9.570000(6.842+/-2.8)
peer_write_all_sec:48.160000-51.480000(49.608+/-1.1)
Differences:
-vsz_kb:582320
+vsz_kb:582316
-listnodes_sec:2.100000-2.170000(2.118+/-0.026)
+listnodes_sec:1.800000-1.880000(1.84+/-0.028)
-peer_write_all_sec:51.600000-52.550000(52.188+/-0.34)
+peer_write_all_sec:48.160000-51.480000(49.608+/-1.1)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It was waiting for a remote channel, but not for all the interesting
channels we want to check. It can sometimes happen that further away
channels are added before closer ones are added, depending on
propagation path, flush timers and bitcoind poll timers. This now just
checks for all channels, which also reduces the ambiguity of whether
we selected a path solely because we were lacking alternatives.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Don't do this:
(gdb) bt
#0 0x00007f37ae667c40 in ?? () from /lib/x86_64-linux-gnu/libz.so.1
#1 0x00007f37ae668b38 in ?? () from /lib/x86_64-linux-gnu/libz.so.1
#2 0x00007f37ae669907 in deflate () from /lib/x86_64-linux-gnu/libz.so.1
#3 0x00007f37ae674c65 in compress2 () from /lib/x86_64-linux-gnu/libz.so.1
#4 0x000000000040cfe3 in zencode_scids (ctx=0xc1f118, scids=0x2599bc49 "\a\325{", len=176320) at gossipd/gossipd.c:218
#5 0x000000000040d0b3 in encode_short_channel_ids_end (encoded=0x7fff8f98d9f0, max_bytes=65490) at gossipd/gossipd.c:236
#6 0x000000000040dd28 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17290511, number_of_blocks=8) at gossipd/gossipd.c:576
#7 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17290511, number_of_blocks=16) at gossipd/gossipd.c:595
#8 0x000000000040ddee in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17290495, number_of_blocks=32) at gossipd/gossipd.c:596
#9 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17290495, number_of_blocks=64) at gossipd/gossipd.c:595
#10 0x000000000040ddee in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17290431, number_of_blocks=128) at gossipd/gossipd.c:596
#11 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17290431, number_of_blocks=256) at gossipd/gossipd.c:595
#12 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17290431, number_of_blocks=512) at gossipd/gossipd.c:595
#13 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17290431, number_of_blocks=1024) at gossipd/gossipd.c:595
#14 0x000000000040ddee in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17289408, number_of_blocks=2047) at gossipd/gossipd.c:596
#15 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17289408, number_of_blocks=4095) at gossipd/gossipd.c:595
#16 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17289408, number_of_blocks=8191) at gossipd/gossipd.c:595
#17 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17289408, number_of_blocks=16382) at gossipd/gossipd.c:595
#18 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17289408, number_of_blocks=32764) at gossipd/gossipd.c:595
#19 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17289408, number_of_blocks=65528) at gossipd/gossipd.c:595
#20 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17289408, number_of_blocks=131056) at gossipd/gossipd.c:595
#21 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17289408, number_of_blocks=262112) at gossipd/gossipd.c:595
#22 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17289408, number_of_blocks=524225) at gossipd/gossipd.c:595
#23 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17289408, number_of_blocks=1048450) at gossipd/gossipd.c:595
#24 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17289408, number_of_blocks=2096900) at gossipd/gossipd.c:595
#25 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17289408, number_of_blocks=4193801) at gossipd/gossipd.c:595
#26 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17289408, number_of_blocks=8387603) at gossipd/gossipd.c:595
#27 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=17289408, number_of_blocks=16775207) at gossipd/gossipd.c:595
#28 0x000000000040ddee in queue_channel_ranges (peer=0x3868fc8, first_blocknum=514201, number_of_blocks=33550414) at gossipd/gossipd.c:596
#29 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=514201, number_of_blocks=67100829) at gossipd/gossipd.c:595
#30 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=514201, number_of_blocks=134201659) at gossipd/gossipd.c:595
#31 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=514201, number_of_blocks=268403318) at gossipd/gossipd.c:595
#32 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=514201, number_of_blocks=536806636) at gossipd/gossipd.c:595
#33 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=514201, number_of_blocks=1073613273) at gossipd/gossipd.c:595
#34 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=514201, number_of_blocks=2147226547) at gossipd/gossipd.c:595
#35 0x000000000040ddc6 in queue_channel_ranges (peer=0x3868fc8, first_blocknum=514201, number_of_blocks=4294453094) at gossipd/gossipd.c:595
#36 0x000000000040df26 in handle_query_channel_range (peer=0x3868fc8, msg=0x37e0678 "\001\ao\342\214\n\266\361\263r\301\246\242F\256c\367O\223\036\203e\341Z\b\234h\326\031") at gossipd/gossipd.c:625
The cause was that converting a block number to an scid truncates it
at 24 bits. When we look through the index from (truncated number) to
(real end number) we get every channel, which is too large to encode,
so we iterate again.
This fixes both that problem, and also the issue that we'd end up
dividing into many empty sections until we get to the highest block
number. Instead, we just tack the empty blocks on to then end of the
final query.
(My initial version requested 0xFFFFFFFE blocks, but the dev code
which records what blocks were returned can't make a bitmap that big
on 32 bit).
Reported-by: George Vaccaro
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Make the two channels adjacent, and specify exactly the number of
divide-and-conquer steps there are.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently only used by gossipd for channel elimination.
Also print them in canonical form (/[01]), so tests need to be
changed.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
generate was deprecated some time ago, so we added the generate_block()
helper. But many calls crept back in, and git master refuses it.
(test_blockchaintrack relied on the return value, so make generate_block
return the list of blocks).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
After Ubuntu 18.10 upgrade, lots of new flake8 warnings.
$ flake8 --version:
3.5.0 (mccabe: 0.6.1, pycodestyle: 2.4.0, pyflakes: 1.6.0) CPython 3.6.7rc1 on Linux
Note it seems that W503 warned about line breaks before binary
operators, and W504 complains about them after. I prefer W504, so
disable W503.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We trade channel_update before channel_announce makes the channel
public, and currently forget them when we finally get the
channel_announce. We should instead apply them, and not rely on
retransmission (which we remove in the next patch!).
This earlier channel_update means test_gossip_jsonrpc triggers too
early, so have that wait for node_announcement.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Incrementing version number means stores which were prior to the previous
commit will be removed, and refreshed. The simplest fix, if not the most
efficient.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's no reason for the db to ever return non-NULL if it's spent. And there's
only one caller, for which that is definitely true.
Suggested-by: @cdeckerFixes: #1934
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These happen after we compact the store; every log I've seen of a
restart on a real node has a message about truncating the store,
because node_announcements predate channel_announcements.
I extracted one such case from testnet, and reduced it to test here.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we have an address hint, we start with that, but we'll use
node_announcement information if required.
Note: we (ab)use the address hint when restoring from the database
or reconnecting, even if the connection was *incoming*. That meant
that the recipient of a connection would *never* manage to connect out.
We still don't take multiple addresses from the DNS seeds: I assume we
should, since there could be IPv4 and IPv6.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's now a potential race: the source peer connect returns, but in
destination peer the master hasn't read the connect message from
connectd, so the peer isn't in listpeers yet.
(Previously the connection stayed in connectd, so there was no such
window).
This is an occasional issue in a few places.
Note that we take the opportunity to speed up test_disconnectpeer too
while we're there.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Michael Schmoock
Michael Schmoock
Christian Decker
lisa neigut