We split json_invoice(), as it now needs to round-trip to the gossipd,
and uniqueness checks need to happen *after* gossipd replies to avoid
a race.
For every candidate channel gossipd gives us, we check that it's in
state NORMAL (not shutting down, not still waiting for lockin), that
it's connected, and that it has capacity. We then choose one with
probability weighted by excess capacity, so larger channels are more
likely.
As a side effect of this, we can tell if an invoice is unpayble (no
channels have sufficient incoming capacity) or difficuly (no *online*
channels have sufficient capacity), so we add those warnings.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For routeboost, we want to select from all our enabled channels with
sufficient incoming capacity. Gossipd knows which are enabled (ie. we
have received a `channel_update` from the peer), but doesn't know the
current incoming capacity.
So we get gossipd to give us all the candidates, and lightningd
selects from those.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Otherwise, if we don't announce the last node, we'll not flush this
out; it will be delayed until the next time we send gossip!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is consistent: we don't broadcast a channel_announce until we've seen
a channel_update, so we probably shouldn't advertise it here.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I split the peer_connected() function into the peer_reconnected(),
which is basically an entire separate path from the rest of
peer_connected().
Also, removed unused TAKEN annotation from `id` parameter. Nobody actually
hands us take() there, and just as well, since we don't take it!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
connectd is the only user of the cryptomsg async APIs; better to
open-code it here. We need to expose a little from cryptomsg(),
but we remove the 'struct peer' entirely from connectd.
One trick is that we still need to defer telling lightningd when a
peer reconnects (until it tells us the old one is disconnected). So
now we generate the message for lightningd and send it once we're woken.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We only call it once, so don't free the "old" one. And fix some indenting.
And make hostname const.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're about to slow down the invoice rpc (esp. under valgrind), which
breaks the delicate timing of the autocleaninvoice test.
Change that so the autocleaner (and timestamp) starts after the invoices
are added.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do this a lot, and had boutique helpers in various places. So add
a more generic one; for convenience it returns a pointer to the new
end element.
I prefer the name tal_arr_expand to tal_arr_append, since it's up to
the caller to populate the new array entry.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Travis failures:
valgrind: m_scheduler/sema.c:104 (vgModuleLocal_sema_down): Assertion 'sema->owner_lwpid != lwpid' failed.
host stacktrace:
==1296== at 0x38083F48: ??? (in /usr/lib/valgrind/memcheck-amd64-linux)
==1296== by 0x38084064: ??? (in /usr/lib/valgrind/memcheck-amd64-linux)
==1296== by 0x380841F1: ??? (in /usr/lib/valgrind/memcheck-amd64-linux)
==1296== by 0x38135DAE: ??? (in /usr/lib/valgrind/memcheck-amd64-linux)
==1296== by 0x380D328D: ??? (in /usr/lib/valgrind/memcheck-amd64-linux)
==1296== by 0x3809A4AC: ??? (in /usr/lib/valgrind/memcheck-amd64-linux)
==1296== by 0x3809AE43: ??? (in /usr/lib/valgrind/memcheck-amd64-linux)
==1296== by 0x380988CF: ??? (in /usr/lib/valgrind/memcheck-amd64-linux)
sched status:
running_tid=0
Thread 1: status = VgTs_WaitSys (lwpid 1296)
==1296== at 0x5729730: __poll_nocancel (syscall-template.S:84)
==1296== by 0x4348DF: daemon_poll (daemon.c:78)
==1296== by 0x4169E7: io_poll_lightningd (lightningd.c:543)
==1296== by 0x471ECD: io_loop (poll.c:282)
==1296== by 0x416E06: main (lightningd.c:744)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have a lot of infrastructure to delay local channel_updates to
avoid spamming on each peer reconnect; we had to keep tracking of
pending ones though, in case we needed the very latest for sending an
error when failing an HTLC.
Instead, it's far simpler to set the local_disabled flag on a channel
when we disconnect, but only send a disabling channel_update if we
actually fail an HTLC.
Note: handle_channel_update() TAKES update (due to tal_arr_dup), but we
didn't use that before. Now we do, add annotation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We trade channel_update before channel_announce makes the channel
public, and currently forget them when we finally get the
channel_announce. We should instead apply them, and not rely on
retransmission (which we remove in the next patch!).
This earlier channel_update means test_gossip_jsonrpc triggers too
early, so have that wait for node_announcement.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's simpler and more robust to just check that it's not yet announced
(the broadcast index will be 0).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I wanted to add run-secret_eq_consttime and run-find_my_abspath to the
.gitignore file, but instead I replaced all the names of tests with a simple
regex.
This works because git doesn't ignore files that are already in git. So
source and header file are safe. It doesn't ignore *.c files that haven't been
added to git either.
Signed-off-by: Mark Beckwith <wythe@intrig.com>
The help command now adds command usage to its output by calling each
command handler in CMD_USAGE mode.
Instead of seeing, for example:
decodepay
Decode {bolt11}, using {description} if necessary
we see:
decodepay bolt11 [description]
Decode {bolt11}, using {description} if necessary
Signed-off-by: Mark Beckwith <wythe@intrig.com>
Callers to param() can now optionally set a flag to see if command_fail was
called.
This is necessary because the `cmd` is freed in case of failure.
I spent a bit of time trying to extend the lifetime of the `cmd` to the end
of parse_request(), but the destructors still needed to be called when they
were, and it was getting ugly. So I took this minimal approach.
Signed-off-by: Mark Beckwith <wythe@intrig.com>
Now call param() even for commands that don't accept any parameters.
This is a bugfix of sorts. For example, before you could call:
bitcoin-cli getinfo blah
and the blah parameter would be ignored.
Now you will get an error: "too many parameters: got 1, expected 0"
Signed-off-by: Mark Beckwith <wythe@intrig.com>
Added the concept of a "command mode". The
behavior of param() changes based on the mode.
Added and tested the command mode of CMD_USAGE for
setting the usage of a command without running it.
Only infrastructure and test. No functional changes.
Signed-off-by: Mark Beckwith <wythe@intrig.com>
It turns out we were heavily relying on the fact that after each message from
the client there'd be a flush, and that there would not be anything after the
JSON object we read. This will no longer be the case once we start streaming
things or we are very quick in issuing the JSON-RPC requests.
This just takes one of the error paths (incomplete read) and makes it into a
successful path if we have indeed read a full root element.
Incrementing version number means stores which were prior to the previous
commit will be removed, and refreshed. The simplest fix, if not the most
efficient.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's no reason for the db to ever return non-NULL if it's spent. And there's
only one caller, for which that is definitely true.
Suggested-by: @cdeckerFixes: #1934
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Christian Decker
lisa neigut
Mark Beckwith
Rene Pickhardt