This is a rebased and combined patch for Tor support. It is extensively
reworked in the following patches, but the basis remains Saibato's work,
so it seemed fairest to begin with this.
Minor changes:
1. Use --announce-addr instead of --tor-external.
2. I also reverted some whitespace and unrelated changes from the patch.
3. Removed unnecessary ';' after } in functions.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Add special option where an empty host means 'wildcard for IPv4 and/or IPv6'
which means ':1234' can be used to set only the portnum.
2. Only add this protocol wildcard if --autolisten=1 (default)
and no other addresses specified.
3. Pass it down to gossipd, so it can handle errors correctly: in most cases,
it's fatal not to be able to bind to a port, but for this case, it's OK
if we can only bind to one of IPv4/v6 (fatal iff neither).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This replacement is a little menial, but it explicitly catches all
the places where we allow a local socket. The actual implementation of
opening a AF_UNIX socket is almost hidden in the patch.
The detection of "valid address" is now more complex:
p->addr.itype != ADDR_INTERNAL_WIREADDR || p->addr.u.wireaddr.type != ADDR_TYPE_PADDING
But most places we do this, we should audit: I'm pretty sure we can't
get an invalid address any more from gossipd (they may be in db, but
we should fix that too).
Closes: #1323
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No new functionality, just a continuation of my work toward completing #665.
I removed the common members of `struct withdrawal` and `struct fund_channel`
and placed them in a new `struct wallet_tx`. Then it was fairly straightforward
to reimplement the existing code in terms of `wallet_tx`.
Since I made some structural changes I wanted to get this approved before I
go any farther.
Added 'all' to fundchannel help message.
We're getting spurious closures, even on mainnet. Using --ignore-fee-limits
is dangerous; it's slightly less so to lower the minimum (which is the
usual cause of problems).
So let's halve it, but beware the floor.
This is a workaround, until we get independent feerates in the spec.
Fixes: #613
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I would have liked to make it a tal object, then we'd catch most
things with our memleak detection. However, sqlite3 doesn't seem to
allow allocator overrides.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the cause of 'sqlite3_close: unable to close due to unfinalized statements or unfinished backups' with the --daemon option.
Fixes: #1420
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently we intuit it from the fd being closed, but that may happen out
of order with when the master thinks it's dead.
So now if the gossip fd closes we just ignore it, and we'll get a
notification from the master when the peer is disconnected.
The notification is slightly ugly in that we have to disable it for
a channel when we manually hand the channel back to gossipd.
Note: as stands, this is racy with reconnects. See the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This was sitting in my gossip-enchancement patch queue, but it simplifies
this set too, so I moved it here).
In 94711969f we added an explicit gossip_index so when gossipd gets
peers back from other daemons, it knows what gossip it has sent (since
gossipd can send gossip after the other daemon is already complete).
This solution is insufficient for the more general case where gossipd
wants to send other messages reliably, so replace it with the other
solution: have gossipd drain the "gossip fd" which the daemon returns.
This turns out to be quite simple, and is probably how I should have
done it originally :(
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Lifetime of 'struct reaching' now only while we're actively doing connect.
2. Always free after a single attempt: if it's an important peer, retry
on a timer.
3. Have a single response message to master, rather than relying on
peer_connected on success and other msgs on failure.
4. If we are actively connecting and we get another command for the same
id, just increment the counter
The result is much simpler in the master daemon, and much nicer for
reconnection: if they say to connect they get an immediate response,
rather than waiting for 10 retries. Even if it's an important peer,
it fires off another reconnect attempt, unless it's actively
connecting now.
This removes exponential backoff: that's restored in next patch. It
also doesn't handle multiple addresses for a single peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And on channel_fail_permanent and closing (the two places we drop to
chain), we tell gossipd it's no longer important.
Fixes: #1316
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The no-rescan change requires us to rescan one last time from the first_blocknum
of our channels (if we have any). The migrations just drop blocks that are
higher, then insert a dummy with the first_blocknum, and then clean up after
us. If we don't have any channels we don't go back at all.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Simplification of the offset calculation to use the rescan parameter, and rename
of `wallet_first_blocknum`. We now use either relative rescan from our last
known location, or absolute if a negative rescan was given. It's all handled in
a single location (except the case in which the blockcount is below our
precomputed offset), so this should reduce surprises.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is a big simplification, we just report the DBs current blockchain height
as the point to continue scanning, or the passed in default. No more guessing
where to continue from or whether the wallet was used and when it first saw the
light of day.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This will allow us in the next commit to store the transactions that triggered
this event in the DB and thus allowing us to replay them later on.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This will be used to replay transactions that were witnessed in the blockchain
during startup, so that onchaind can be recreate its state.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These transactions being seen on the blockchain triggered some action in
onchaind so we need to replay them when we restore the onchaind.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
d822ba1ee accidentally removed this case, which is important: if the
other side didn't get our final matching closing_signed, it will
reconnect and try again. We consider the channel no longer "active"
and thus ignore it, and get upset when it send the
`channel_reestablish` message.
We could just consider CLOSINGD_COMPLETE to be active, but then we'd
have to wait for the closing transaction to be mined before we'd allow
another connection.
We can't special case it when the peer reconnects, because there
could be (in theory) multiple channels for that peer in CLOSINGD_COMPLETE,
and we don't know which one to reestablish.
So, we need to catch this when they send the reestablish, and hand
that msg to closingd to do negotiation again. We already have code
to note that we're in CLOSINGD_COMPLETE and thus ignore any result
it gives us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The new connect code revealed an existing race: we tell gossipd to
release the peer, but at the same time it connects in. gossipd fails
the release because the peer is remote, and json_fundchannel fails.
Instead, we catch this race when we get peer_connected() and we were
trying to open a channel. It means keeping a list of fundchannels which
are awaiting a gossipd response though.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We missed it in some corner cases where we crashed/were killed between
being told of the lockin and sending the channel_normal_operation message.
When we were restarted, we were told both sides were locked in already,
so we never updated the state.
Pull the entire "tell channeld" logic into channel_control.c, and make
it clear that we need to keep waching if we cant't tell channeld. I think
we did get this correct in practice, since funding_announce_cb has the
same test, but it's better to be clear.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Also report tx and txid, and whether we closed unilaterally or
bilaterally, if we could close the channel.
Also make a manpage.
Fixes: #1207Fixes: #714Fixes: #622
The only use for these was to compute their txids so we could notify depth
in case of reorgs.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
All of the callback functions were only using the tx to generate the txid again,
so we just pass that in directly and save passing the tx itself.
This is a simplification to move to the DB backed depth callbacks. It'd be
rather wasteful to read the rawtx and deserialize just to serialize right away
again to find the txid, when we already searched the DB for exactly that txid.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Currently these are either transactions we sent ourselves or transactions that
we are watching because they are part of a channel.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Repeated crashes could result in the `last_processed_block` variable being
pushed further and further into the past (in some cases going as far back as
scanning blocks from 2012...). This is a stop-gap solution that just lower
bounds the value to what is the first possible block we might be interested in
LN, until we have the 0-rescan fix I'm working on.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
There are two very hard problems in software engineering:
1. Off-by-one errors
In this case we were rolling back further than needed and we were starting the
catchup one block further than expected.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
So we know how much counterparty could theoretically steal from us
(msatoshi_to_us - msatoshi_to_us_min) and how much we could
theoretically steal from counterparty (msatoshi_to_us_max -
msatoshi_to_us).
For more piloting goodness.
I didn't convert all tests: they can still use a standalone context.
It's just marginally more efficient to share the libwally one for all
our daemons which link against it anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This may be causing #1280, since with `--daemon` the DB is being reopened
without enabling the foreign key relations and hence the delete cascades.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Saibato
Rusty Russell
ZmnSCPxj
Mark Beckwith
practicalswift
Christian Decker
conanoc
Zhen Zhang