You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

155 lines
4.9 KiB

.TH "LIGHTNING-FEERATES" "7" "" "" "lightning-feerates"
.SH NAME
lightning-feerates - Command for querying recommended onchain feerates
.SH SYNOPSIS
\fBfeerates\fR \fIstyle\fR
.SH DESCRIPTION
The \fBfeerates\fR command returns the feerates that C-lightning will use\.
The feerates will be based on the recommended feerates from the backend\.
The backend may fail to provide estimates, but if it was able to provide
estimates in the past, C-lightning will continue to use those for a while\.
C-lightning will also smoothen feerate estimations from the backend\.
\fIstyle\fR is either of the two strings:
.RS
.IP \[bu]
\fIperkw\fR - provide feerate in units of satoshis per 1000 weight\.
.IP \[bu]
\fIperkb\fR - provide feerate in units of satoshis per 1000 virtual bytes\.
.RE
Bitcoin transactions have non-witness and witness bytes:
.RS
.IP \[bu]
Non-witness bytes count as 4 weight, 1 virtual byte\.
All bytes other than SegWit witness count as non-witness bytes\.
.IP \[bu]
Witness bytes count as 1 weight, 0\.25 virtual bytes\.
.RE
Thus, all \fIperkb\fR feerates will be exactly 4 times \fIperkw\fR feerates\.
To compute the fee for a transaction, multiply its weight or virtual bytes
by the appropriate \fIperkw\fR or \fIperkw\fR feerate
returned by this command,
then divide by 1000\.
There is currently no way to change these feerates from the RPC\.
If you need custom control over onchain feerates,
you will need to provide your own plugin
that replaces the \fBbcli\fR plugin backend\.
For commands like \fBlightning-withdraw\fR(7) or \fBlightning-fundchannel\fR(7) you
can provide a preferred feerate directly as a parameter,
which will override the recommended feerates returned by \fBfeerates\fR\.
.SH RETURN VALUE
The \fBfeerates\fR command returns the feerates in an object named
\fIperkw\fR or \fIperkb\fR, depending on your \fIstyle\fR parameter\.
Some of these estimations may be missing, except for \fImin_acceptable\fR
and \fImax_acceptable\fR, which are always present\.
The \fIperkw\fR or \fIperkb\fR object may have fields containing the estimates:
.RS
.IP \[bu]
\fIopening\fR - feerate used for channel opening by \fBlightning-fundchannel\fR(7),
as well as normal onchain-to-onchain spends by \fBlightning-withdraw\fR(7)\.
In general, for all normal onchain-to-onchain spends, this is the feerate
you should also use\.
.IP \[bu]
\fImutual_close\fR - the starting feerate used in mutual close negotiation\.
Note that since mutual close is a \fBnegotiation\fR,
the actual feerate used in mutual close
will be somewhere between this
and the corresponding mutual close feerate of the peer\.
.IP \[bu]
\fIunilateral_close\fR - the feerate we will pay for when a unilateral close
is done on a channel we originally funded\.
When anchor commitments are implemented,
this will be the feerate we will use
for a unilateral close we initiated\.
.IP \[bu]
\fIdelayed_to_us\fR - the feerate we will use when claiming our output from
a unilateral close we initiated\.
.IP \[bu]
\fIhtlc_resolution\fR - the feerate we will use to claim HTLCs
from a unilateral close we initiated\.
.IP \[bu]
\fIpenalty\fR - the feerate we will use to revoke old state,
if the counterparty attempts to cheat us\.
.RE
The following fields are always present in the \fIperkw\fR or \fIperkb\fR object:
.RS
.IP \[bu]
\fImin_acceptable\fR - the smallest feerate that you can use,
usually the minimum relayed feerate of the backend\.
.IP \[bu]
\fImax_acceptable\fR - the largest feerate we will accept
from remote negotiations\.
If a peer attempts to open a channel to us but wants a unilateral close
feerate larger than \fImax_acceptable\fR, we reject the open attempt\.
If the peer attempts to change the unilateral close feerate of a channel it
opened to us, such that the new feerate exceeds \fImax_acceptable\fR, we
unilaterally close the channel
(at the current unilateral close feerate instead of the new one)\.
.RE
.SH ERRORS
The \fBfeerates\fR command will never error,
however some fields may be missing in the result
if feerate estimates for that kind of transaction are unavailable\.
.SH NOTES
Many other commands have a \fIfeerate\fR parameter, which can be the strings
\fIurgent\fR, \fInormal\fR, or \fIslow\fR\.
These are mapped to the \fBfeerates\fR outputs as:
.RS
.IP \[bu]
\fIurgent\fR - equal to \fIunilateral_close\fR
.IP \[bu]
\fInormal\fR - equal to \fIopening\fR
.IP \[bu]
\fIslow\fR - equal to \fImin_acceptable\fR\.
.RE
.SH TRIVIA
In C-lightning we like to call the weight unit "sipa"
in honor of Pieter Wuille,
who uses the name "sipa" on IRC and elsewhere\.
Internally we call the \fIperkw\fR style as "feerate per kilosipa"\.
.SH AUTHOR
ZmnSCPxj < \fIZmnSCPxj@protonmail.com\fR > wrote the initial version of this
manpage\.
.SH SEE ALSO
\fBlightning-fundchannel\fR(7), \fBlightning-withdraw\fR(7), \fBlightning-txprepare\fR(7),
\fBlightning-fundchannel_start\fR(7)\.
.SH RESOURCES
Main web site: \fIhttps://github.com/ElementsProject/lightning\fR