You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

748 lines
22 KiB

-include config.mk
BUILDTYPE ?= Release
PYTHON ?= python
DESTDIR ?=
SIGN ?=
PREFIX ?= /usr/local
FLAKY_TESTS ?= run
TEST_CI_ARGS ?=
STAGINGSERVER ?= node-www
OSTYPE := $(shell uname -s | tr '[A-Z]' '[a-z]')
ifdef JOBS
PARALLEL_ARGS = -j $(JOBS)
endif
test: run v8 tests from node tree Ported by exinfinitum from a PR by jasnell: see https://github.com/nodejs/node-v0.x-archive/pull/14185 Allows the running of v8 tests on node's packaged v8 source code. Note that the limited win32 support added by jasnell has NOT been ported, and so these tests are currently UNIX ONLY. Note that gclient depot tools (see https://commondatastorage.googleapis.com/ chrome-infra-docs/flat/depot_tools/docs/html/ depot_tools_tutorial.html#_setting_up) and subversion are required to run tests. To perform tests, run the following commands: make v8 DESTCPU=(ARCH) make test-v8 DESTCPU=(ARCH) where (ARCH) is your CPU architecture, e.g. x64, ia32. DESTCPU MUST be specified for this to work properly. Can also do tests on debug build by using "make test-v8 DESTCPU=(ARCH) BUILDTYPE=Debug", or perform intl or benchmark tests via make test-v8-intl or test-v8-benchmarks respectively. Note that by default, quickcheck and TAP output are disabled, and i18n is enabled. To activate these options, use options"QUICKCHECK=True" and "ENABLE_V8_TAP=True" respectively. Use "DISABLE_V8_I18N" to disable i18n. Use V8_BUILD_OPTIONS to allow custom user-defined flags to be appended onto "make v8". Any tests performed after changes to the packaged v8 file will require recompiling of v8, which can be done using "make v8 DESTCPU=(ARCH)". Finally, two additional files necessary for one of the v8 tests have been added to the v8 folder. PR-URL: https://github.com/nodejs/node/pull/4704 Reviewed-By: James M Snell <jasnell@gmail.com> Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com> Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl> Reviewed-By: targos - Michaël Zasso <mic.besace@gmail.com>
10 years ago
ifdef QUICKCHECK
QUICKCHECK_ARG := --quickcheck
endif
ifdef ENABLE_V8_TAP
TAP_V8 := --junitout $(PWD)/v8-tap.xml
TAP_V8_INTL := --junitout $(PWD)/v8-intl-tap.xml
TAP_V8_BENCHMARKS := --junitout $(PWD)/v8-benchmarks-tap.xml
test: run v8 tests from node tree Ported by exinfinitum from a PR by jasnell: see https://github.com/nodejs/node-v0.x-archive/pull/14185 Allows the running of v8 tests on node's packaged v8 source code. Note that the limited win32 support added by jasnell has NOT been ported, and so these tests are currently UNIX ONLY. Note that gclient depot tools (see https://commondatastorage.googleapis.com/ chrome-infra-docs/flat/depot_tools/docs/html/ depot_tools_tutorial.html#_setting_up) and subversion are required to run tests. To perform tests, run the following commands: make v8 DESTCPU=(ARCH) make test-v8 DESTCPU=(ARCH) where (ARCH) is your CPU architecture, e.g. x64, ia32. DESTCPU MUST be specified for this to work properly. Can also do tests on debug build by using "make test-v8 DESTCPU=(ARCH) BUILDTYPE=Debug", or perform intl or benchmark tests via make test-v8-intl or test-v8-benchmarks respectively. Note that by default, quickcheck and TAP output are disabled, and i18n is enabled. To activate these options, use options"QUICKCHECK=True" and "ENABLE_V8_TAP=True" respectively. Use "DISABLE_V8_I18N" to disable i18n. Use V8_BUILD_OPTIONS to allow custom user-defined flags to be appended onto "make v8". Any tests performed after changes to the packaged v8 file will require recompiling of v8, which can be done using "make v8 DESTCPU=(ARCH)". Finally, two additional files necessary for one of the v8 tests have been added to the v8 folder. PR-URL: https://github.com/nodejs/node/pull/4704 Reviewed-By: James M Snell <jasnell@gmail.com> Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com> Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl> Reviewed-By: targos - Michaël Zasso <mic.besace@gmail.com>
10 years ago
endif
V8_TEST_OPTIONS = $(V8_EXTRA_TEST_OPTIONS)
test: run v8 tests from node tree Ported by exinfinitum from a PR by jasnell: see https://github.com/nodejs/node-v0.x-archive/pull/14185 Allows the running of v8 tests on node's packaged v8 source code. Note that the limited win32 support added by jasnell has NOT been ported, and so these tests are currently UNIX ONLY. Note that gclient depot tools (see https://commondatastorage.googleapis.com/ chrome-infra-docs/flat/depot_tools/docs/html/ depot_tools_tutorial.html#_setting_up) and subversion are required to run tests. To perform tests, run the following commands: make v8 DESTCPU=(ARCH) make test-v8 DESTCPU=(ARCH) where (ARCH) is your CPU architecture, e.g. x64, ia32. DESTCPU MUST be specified for this to work properly. Can also do tests on debug build by using "make test-v8 DESTCPU=(ARCH) BUILDTYPE=Debug", or perform intl or benchmark tests via make test-v8-intl or test-v8-benchmarks respectively. Note that by default, quickcheck and TAP output are disabled, and i18n is enabled. To activate these options, use options"QUICKCHECK=True" and "ENABLE_V8_TAP=True" respectively. Use "DISABLE_V8_I18N" to disable i18n. Use V8_BUILD_OPTIONS to allow custom user-defined flags to be appended onto "make v8". Any tests performed after changes to the packaged v8 file will require recompiling of v8, which can be done using "make v8 DESTCPU=(ARCH)". Finally, two additional files necessary for one of the v8 tests have been added to the v8 folder. PR-URL: https://github.com/nodejs/node/pull/4704 Reviewed-By: James M Snell <jasnell@gmail.com> Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com> Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl> Reviewed-By: targos - Michaël Zasso <mic.besace@gmail.com>
10 years ago
ifdef DISABLE_V8_I18N
V8_TEST_OPTIONS += --noi18n
test: run v8 tests from node tree Ported by exinfinitum from a PR by jasnell: see https://github.com/nodejs/node-v0.x-archive/pull/14185 Allows the running of v8 tests on node's packaged v8 source code. Note that the limited win32 support added by jasnell has NOT been ported, and so these tests are currently UNIX ONLY. Note that gclient depot tools (see https://commondatastorage.googleapis.com/ chrome-infra-docs/flat/depot_tools/docs/html/ depot_tools_tutorial.html#_setting_up) and subversion are required to run tests. To perform tests, run the following commands: make v8 DESTCPU=(ARCH) make test-v8 DESTCPU=(ARCH) where (ARCH) is your CPU architecture, e.g. x64, ia32. DESTCPU MUST be specified for this to work properly. Can also do tests on debug build by using "make test-v8 DESTCPU=(ARCH) BUILDTYPE=Debug", or perform intl or benchmark tests via make test-v8-intl or test-v8-benchmarks respectively. Note that by default, quickcheck and TAP output are disabled, and i18n is enabled. To activate these options, use options"QUICKCHECK=True" and "ENABLE_V8_TAP=True" respectively. Use "DISABLE_V8_I18N" to disable i18n. Use V8_BUILD_OPTIONS to allow custom user-defined flags to be appended onto "make v8". Any tests performed after changes to the packaged v8 file will require recompiling of v8, which can be done using "make v8 DESTCPU=(ARCH)". Finally, two additional files necessary for one of the v8 tests have been added to the v8 folder. PR-URL: https://github.com/nodejs/node/pull/4704 Reviewed-By: James M Snell <jasnell@gmail.com> Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com> Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl> Reviewed-By: targos - Michaël Zasso <mic.besace@gmail.com>
10 years ago
V8_BUILD_OPTIONS += i18nsupport=off
endif
BUILDTYPE_LOWER := $(shell echo $(BUILDTYPE) | tr '[A-Z]' '[a-z]')
# Determine EXEEXT
EXEEXT := $(shell $(PYTHON) -c \
"import sys; print('.exe' if sys.platform == 'win32' else '')")
NODE_EXE = node$(EXEEXT)
NODE ?= ./$(NODE_EXE)
NODE_G_EXE = node_g$(EXEEXT)
NPM ?= ./deps/npm/bin/npm-cli.js
# Flags for packaging.
BUILD_DOWNLOAD_FLAGS ?= --download=all
BUILD_INTL_FLAGS ?= --with-intl=small-icu
BUILD_RELEASE_FLAGS ?= $(BUILD_DOWNLOAD_FLAGS) $(BUILD_INTL_FLAGS)
# Default to verbose builds.
# To do quiet/pretty builds, run `make V=` to set V to an empty string,
# or set the V environment variable to an empty string.
V ?= 1
# BUILDTYPE=Debug builds both release and debug builds. If you want to compile
# just the debug build, run `make -C out BUILDTYPE=Debug` instead.
13 years ago
ifeq ($(BUILDTYPE),Release)
all: out/Makefile $(NODE_EXE)
13 years ago
else
all: out/Makefile $(NODE_EXE) $(NODE_G_EXE)
13 years ago
endif
# The .PHONY is needed to ensure that we recursively use the out/Makefile
# to check for changes.
.PHONY: $(NODE_EXE) $(NODE_G_EXE)
13 years ago
$(NODE_EXE): config.gypi out/Makefile
$(MAKE) -C out BUILDTYPE=Release V=$(V)
ln -fs out/Release/$(NODE_EXE) $@
13 years ago
$(NODE_G_EXE): config.gypi out/Makefile
$(MAKE) -C out BUILDTYPE=Debug V=$(V)
ln -fs out/Debug/$(NODE_EXE) $@
out/Makefile: common.gypi deps/uv/uv.gyp deps/http_parser/http_parser.gyp \
deps/zlib/zlib.gyp deps/v8/gypfiles/toolchain.gypi \
deps/v8/gypfiles/features.gypi deps/v8/src/v8.gyp node.gyp \
config.gypi
$(PYTHON) tools/gyp_node.py -f make
config.gypi: configure
$(error Missing or stale $@, please run ./$<)
install: all
$(PYTHON) tools/install.py $@ '$(DESTDIR)' '$(PREFIX)'
uninstall:
$(PYTHON) tools/install.py $@ '$(DESTDIR)' '$(PREFIX)'
clean:
-rm -rf out/Makefile $(NODE_EXE) $(NODE_G_EXE) out/$(BUILDTYPE)/$(NODE_EXE) \
out/$(BUILDTYPE)/node.exp
@if [ -d out ]; then find out/ -name '*.o' -o -name '*.a' -o -name '*.d' | xargs rm -rf; fi
-rm -rf node_modules
@if [ -d deps/icu ]; then echo deleting deps/icu; rm -rf deps/icu; fi
-rm -f test.tap
distclean:
-rm -rf out
-rm -f config.gypi icu_config.gypi config_fips.gypi
-rm -f config.mk
-rm -rf $(NODE_EXE) $(NODE_G_EXE)
-rm -rf node_modules
build: i18n: add icu config options Make &#34;--with-intl=none&#34; the default and add &#34;intl-none&#34; option to vcbuild.bat. If icu data is missing print a warning unless either --download=all or --download=icu is set. If set then automatically download, verify (MD5) and unpack the ICU data if not already available. There&#39;s a &#34;list&#34; of URLs being used, but right now only the first is picked up. The logic works something like this: * If there is no directory deps/icu, * If no zip file (currently icu4c-54_1-src.zip), * Download zip file (icu-project.org -&gt; sf.net) * Verify the MD5 sum of the zipfile * If bad, print error and exit * Unpack the zipfile into deps/icu * If deps/icu now exists, use it, else fail with help text Add the configuration option &#34;--with-icu-source=...&#34; Usage: * --with-icu-source=/path/to/my/other/icu * --with-icu-source=/path/to/icu54.zip * --with-icu-source=/path/to/icu54.tgz * --with-icu-source=http://example.com/icu54.tar.bz2 Add the configuration option &#34;--with-icu-locals=...&#34;. Allows choosing which locales are used in the &#34;small-icu&#34; case. Example: configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl (Also note that as of this writing, neither Klingon nor Ancient Greek are in upstream CLDR data. Serving suggestion only.) Don&#39;t use hard coded ../../out paths on windows. This was suggested by @misterdjules as it causes test failures. With this fix, &#34;out&#34; is no longer created on windows and the following can run properly: python tools/test.py simple Reduce space by about 1MB with ICU 54 (over without this patch). Also trims a few other source files, but only conditional on the exact ICU version used. This is to future-proof - a file that is unneeded now may be needed in future ICUs. Also: * Update distclean to remove icu related files * Refactor some code into tools/configure.d/nodedownload.py * Update docs * Add test PR-URL: https://github.com/joyent/node/pull/8719 Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230 [trev.norris@gmail.com small change to test&#39;s whitespace and logic] Signed-off-by: Trevor Norris &lt;trev.norris@gmail.com&gt;
10 years ago
-rm -rf deps/icu
-rm -rf deps/icu4c*.tgz deps/icu4c*.zip deps/icu-tmp
-rm -f $(BINARYTAR).* $(TARBALL).*
test: run v8 tests from node tree Ported by exinfinitum from a PR by jasnell: see https://github.com/nodejs/node-v0.x-archive/pull/14185 Allows the running of v8 tests on node&#39;s packaged v8 source code. Note that the limited win32 support added by jasnell has NOT been ported, and so these tests are currently UNIX ONLY. Note that gclient depot tools (see https://commondatastorage.googleapis.com/ chrome-infra-docs/flat/depot_tools/docs/html/ depot_tools_tutorial.html#_setting_up) and subversion are required to run tests. To perform tests, run the following commands: make v8 DESTCPU=(ARCH) make test-v8 DESTCPU=(ARCH) where (ARCH) is your CPU architecture, e.g. x64, ia32. DESTCPU MUST be specified for this to work properly. Can also do tests on debug build by using &#34;make test-v8 DESTCPU=(ARCH) BUILDTYPE=Debug&#34;, or perform intl or benchmark tests via make test-v8-intl or test-v8-benchmarks respectively. Note that by default, quickcheck and TAP output are disabled, and i18n is enabled. To activate these options, use options&#34;QUICKCHECK=True&#34; and &#34;ENABLE_V8_TAP=True&#34; respectively. Use &#34;DISABLE_V8_I18N&#34; to disable i18n. Use V8_BUILD_OPTIONS to allow custom user-defined flags to be appended onto &#34;make v8&#34;. Any tests performed after changes to the packaged v8 file will require recompiling of v8, which can be done using &#34;make v8 DESTCPU=(ARCH)&#34;. Finally, two additional files necessary for one of the v8 tests have been added to the v8 folder. PR-URL: https://github.com/nodejs/node/pull/4704 Reviewed-By: James M Snell &lt;jasnell@gmail.com&gt; Reviewed-By: Michael Dawson &lt;michael_dawson@ca.ibm.com&gt; Reviewed-By: Ben Noordhuis &lt;info@bnoordhuis.nl&gt; Reviewed-By: targos - Michaël Zasso &lt;mic.besace@gmail.com&gt;
10 years ago
-rm -rf deps/v8/testing/gmock
check: test
cctest: all
@out/$(BUILDTYPE)/$@
test: run v8 tests from node tree Ported by exinfinitum from a PR by jasnell: see https://github.com/nodejs/node-v0.x-archive/pull/14185 Allows the running of v8 tests on node&#39;s packaged v8 source code. Note that the limited win32 support added by jasnell has NOT been ported, and so these tests are currently UNIX ONLY. Note that gclient depot tools (see https://commondatastorage.googleapis.com/ chrome-infra-docs/flat/depot_tools/docs/html/ depot_tools_tutorial.html#_setting_up) and subversion are required to run tests. To perform tests, run the following commands: make v8 DESTCPU=(ARCH) make test-v8 DESTCPU=(ARCH) where (ARCH) is your CPU architecture, e.g. x64, ia32. DESTCPU MUST be specified for this to work properly. Can also do tests on debug build by using &#34;make test-v8 DESTCPU=(ARCH) BUILDTYPE=Debug&#34;, or perform intl or benchmark tests via make test-v8-intl or test-v8-benchmarks respectively. Note that by default, quickcheck and TAP output are disabled, and i18n is enabled. To activate these options, use options&#34;QUICKCHECK=True&#34; and &#34;ENABLE_V8_TAP=True&#34; respectively. Use &#34;DISABLE_V8_I18N&#34; to disable i18n. Use V8_BUILD_OPTIONS to allow custom user-defined flags to be appended onto &#34;make v8&#34;. Any tests performed after changes to the packaged v8 file will require recompiling of v8, which can be done using &#34;make v8 DESTCPU=(ARCH)&#34;. Finally, two additional files necessary for one of the v8 tests have been added to the v8 folder. PR-URL: https://github.com/nodejs/node/pull/4704 Reviewed-By: James M Snell &lt;jasnell@gmail.com&gt; Reviewed-By: Michael Dawson &lt;michael_dawson@ca.ibm.com&gt; Reviewed-By: Ben Noordhuis &lt;info@bnoordhuis.nl&gt; Reviewed-By: targos - Michaël Zasso &lt;mic.besace@gmail.com&gt;
10 years ago
v8:
tools/make-v8.sh v8
$(MAKE) -C deps/v8 $(V8_ARCH).$(BUILDTYPE_LOWER) $(V8_BUILD_OPTIONS)
test: run v8 tests from node tree Ported by exinfinitum from a PR by jasnell: see https://github.com/nodejs/node-v0.x-archive/pull/14185 Allows the running of v8 tests on node&#39;s packaged v8 source code. Note that the limited win32 support added by jasnell has NOT been ported, and so these tests are currently UNIX ONLY. Note that gclient depot tools (see https://commondatastorage.googleapis.com/ chrome-infra-docs/flat/depot_tools/docs/html/ depot_tools_tutorial.html#_setting_up) and subversion are required to run tests. To perform tests, run the following commands: make v8 DESTCPU=(ARCH) make test-v8 DESTCPU=(ARCH) where (ARCH) is your CPU architecture, e.g. x64, ia32. DESTCPU MUST be specified for this to work properly. Can also do tests on debug build by using &#34;make test-v8 DESTCPU=(ARCH) BUILDTYPE=Debug&#34;, or perform intl or benchmark tests via make test-v8-intl or test-v8-benchmarks respectively. Note that by default, quickcheck and TAP output are disabled, and i18n is enabled. To activate these options, use options&#34;QUICKCHECK=True&#34; and &#34;ENABLE_V8_TAP=True&#34; respectively. Use &#34;DISABLE_V8_I18N&#34; to disable i18n. Use V8_BUILD_OPTIONS to allow custom user-defined flags to be appended onto &#34;make v8&#34;. Any tests performed after changes to the packaged v8 file will require recompiling of v8, which can be done using &#34;make v8 DESTCPU=(ARCH)&#34;. Finally, two additional files necessary for one of the v8 tests have been added to the v8 folder. PR-URL: https://github.com/nodejs/node/pull/4704 Reviewed-By: James M Snell &lt;jasnell@gmail.com&gt; Reviewed-By: Michael Dawson &lt;michael_dawson@ca.ibm.com&gt; Reviewed-By: Ben Noordhuis &lt;info@bnoordhuis.nl&gt; Reviewed-By: targos - Michaël Zasso &lt;mic.besace@gmail.com&gt;
10 years ago
test: all
$(MAKE) build-addons
$(MAKE) cctest
$(PYTHON) tools/test.py --mode=release -J \
addons doctool inspector known_issues message pseudo-tty parallel sequential
$(MAKE) lint
test-parallel: all
$(PYTHON) tools/test.py --mode=release parallel -J
test-valgrind: all
$(PYTHON) tools/test.py --mode=release --valgrind sequential parallel message
test/gc/node_modules/weak/build/Release/weakref.node: $(NODE_EXE)
$(NODE) deps/npm/node_modules/node-gyp/bin/node-gyp rebuild \
--python="$(PYTHON)" \
--directory="$(shell pwd)/test/gc/node_modules/weak" \
--nodedir="$(shell pwd)"
# Implicitly depends on $(NODE_EXE), see the build-addons rule for rationale.
DOCBUILDSTAMP_PREREQS = tools/doc/addon-verify.js doc/api/addons.md
ifeq ($(OSTYPE),aix)
DOCBUILDSTAMP_PREREQS := $(DOCBUILDSTAMP_PREREQS) out/$(BUILDTYPE)/node.exp
endif
test/addons/.docbuildstamp: $(DOCBUILDSTAMP_PREREQS)
$(RM) -r test/addons/??_*/
$(NODE) $<
touch $@
ADDONS_BINDING_GYPS := \
$(filter-out test/addons/??_*/binding.gyp, \
$(wildcard test/addons/*/binding.gyp))
ADDONS_BINDING_SOURCES := \
$(filter-out test/addons/??_*/*.cc, $(wildcard test/addons/*/*.cc)) \
$(filter-out test/addons/??_*/*.h, $(wildcard test/addons/*/*.h))
# Implicitly depends on $(NODE_EXE), see the build-addons rule for rationale.
# Depends on node-gyp package.json so that build-addons is (re)executed when
# node-gyp is updated as part of an npm update.
test/addons/.buildstamp: config.gypi \
deps/npm/node_modules/node-gyp/package.json \
$(ADDONS_BINDING_GYPS) $(ADDONS_BINDING_SOURCES) \
deps/uv/include/*.h deps/v8/include/*.h \
src/node.h src/node_buffer.h src/node_object_wrap.h src/node_version.h \
test/addons/.docbuildstamp
# Cannot use $(wildcard test/addons/*/) here, it's evaluated before
# embedded addons have been generated from the documentation.
for dirname in test/addons/*/; do \
$(NODE) deps/npm/node_modules/node-gyp/bin/node-gyp rebuild \
--python="$(PYTHON)" \
--directory="$$PWD/$$dirname" \
--nodedir="$$PWD" || exit 1 ; \
done
touch $@
# .buildstamp and .docbuildstamp need $(NODE_EXE) but cannot depend on it
# directly because it calls make recursively. The parent make cannot know
# if the subprocess touched anything so it pessimistically assumes that
# .buildstamp and .docbuildstamp are out of date and need a rebuild.
# Just goes to show that recursive make really is harmful...
# TODO(bnoordhuis) Force rebuild after gyp update.
build-addons: $(NODE_EXE) test/addons/.buildstamp
test-gc: all test/gc/node_modules/weak/build/Release/weakref.node
$(PYTHON) tools/test.py --mode=release gc
test-build: | all build-addons
test-all: test-build test/gc/node_modules/weak/build/Release/weakref.node
$(PYTHON) tools/test.py --mode=debug,release
test-all-valgrind: test-build
$(PYTHON) tools/test.py --mode=debug,release --valgrind
CI_NATIVE_SUITES := addons
CI_JS_SUITES := doctool inspector known_issues message parallel pseudo-tty sequential
# Build and test addons without building anything else
test-ci-native: | test/addons/.buildstamp
$(PYTHON) tools/test.py $(PARALLEL_ARGS) -p tap --logfile test.tap \
--mode=release --flaky-tests=$(FLAKY_TESTS) \
$(TEST_CI_ARGS) $(CI_NATIVE_SUITES)
# This target should not use a native compiler at all
test-ci-js:
$(PYTHON) tools/test.py $(PARALLEL_ARGS) -p tap --logfile test.tap \
--mode=release --flaky-tests=$(FLAKY_TESTS) \
$(TEST_CI_ARGS) $(CI_JS_SUITES)
test-ci: | build-addons
out/Release/cctest --gtest_output=tap:cctest.tap
$(PYTHON) tools/test.py $(PARALLEL_ARGS) -p tap --logfile test.tap \
--mode=release --flaky-tests=$(FLAKY_TESTS) \
$(TEST_CI_ARGS) $(CI_NATIVE_SUITES) $(CI_JS_SUITES)
test-release: test-build
$(PYTHON) tools/test.py --mode=release
test-debug: test-build
$(PYTHON) tools/test.py --mode=debug
test-message: test-build
$(PYTHON) tools/test.py message
15 years ago
test-simple: | cctest # Depends on 'all'.
$(PYTHON) tools/test.py parallel sequential
test-pummel: all
$(PYTHON) tools/test.py pummel
test-internet: all
$(PYTHON) tools/test.py internet
15 years ago
test-debugger: all
$(PYTHON) tools/test.py debugger
test-inspector: all
$(PYTHON) tools/test.py inspector
test-known-issues: all
$(PYTHON) tools/test.py known_issues
test-npm: $(NODE_EXE)
NODE=$(NODE) tools/test-npm.sh
test-npm-publish: $(NODE_EXE)
npm_package_config_publishtest=true $(NODE) deps/npm/test/run.js
test-addons: test-build
$(PYTHON) tools/test.py --mode=release addons
test-timers:
$(MAKE) --directory=tools faketime
$(PYTHON) tools/test.py --mode=release timers
test-timers-clean:
$(MAKE) --directory=tools clean
ifneq ("","$(wildcard deps/v8/tools/run-tests.py)")
test-v8: v8
test: run v8 tests from node tree Ported by exinfinitum from a PR by jasnell: see https://github.com/nodejs/node-v0.x-archive/pull/14185 Allows the running of v8 tests on node&#39;s packaged v8 source code. Note that the limited win32 support added by jasnell has NOT been ported, and so these tests are currently UNIX ONLY. Note that gclient depot tools (see https://commondatastorage.googleapis.com/ chrome-infra-docs/flat/depot_tools/docs/html/ depot_tools_tutorial.html#_setting_up) and subversion are required to run tests. To perform tests, run the following commands: make v8 DESTCPU=(ARCH) make test-v8 DESTCPU=(ARCH) where (ARCH) is your CPU architecture, e.g. x64, ia32. DESTCPU MUST be specified for this to work properly. Can also do tests on debug build by using &#34;make test-v8 DESTCPU=(ARCH) BUILDTYPE=Debug&#34;, or perform intl or benchmark tests via make test-v8-intl or test-v8-benchmarks respectively. Note that by default, quickcheck and TAP output are disabled, and i18n is enabled. To activate these options, use options&#34;QUICKCHECK=True&#34; and &#34;ENABLE_V8_TAP=True&#34; respectively. Use &#34;DISABLE_V8_I18N&#34; to disable i18n. Use V8_BUILD_OPTIONS to allow custom user-defined flags to be appended onto &#34;make v8&#34;. Any tests performed after changes to the packaged v8 file will require recompiling of v8, which can be done using &#34;make v8 DESTCPU=(ARCH)&#34;. Finally, two additional files necessary for one of the v8 tests have been added to the v8 folder. PR-URL: https://github.com/nodejs/node/pull/4704 Reviewed-By: James M Snell &lt;jasnell@gmail.com&gt; Reviewed-By: Michael Dawson &lt;michael_dawson@ca.ibm.com&gt; Reviewed-By: Ben Noordhuis &lt;info@bnoordhuis.nl&gt; Reviewed-By: targos - Michaël Zasso &lt;mic.besace@gmail.com&gt;
10 years ago
# note: performs full test unless QUICKCHECK is specified
deps/v8/tools/run-tests.py --arch=$(V8_ARCH) \
--mode=$(BUILDTYPE_LOWER) $(V8_TEST_OPTIONS) $(QUICKCHECK_ARG) \
test: run v8 tests from node tree Ported by exinfinitum from a PR by jasnell: see https://github.com/nodejs/node-v0.x-archive/pull/14185 Allows the running of v8 tests on node&#39;s packaged v8 source code. Note that the limited win32 support added by jasnell has NOT been ported, and so these tests are currently UNIX ONLY. Note that gclient depot tools (see https://commondatastorage.googleapis.com/ chrome-infra-docs/flat/depot_tools/docs/html/ depot_tools_tutorial.html#_setting_up) and subversion are required to run tests. To perform tests, run the following commands: make v8 DESTCPU=(ARCH) make test-v8 DESTCPU=(ARCH) where (ARCH) is your CPU architecture, e.g. x64, ia32. DESTCPU MUST be specified for this to work properly. Can also do tests on debug build by using &#34;make test-v8 DESTCPU=(ARCH) BUILDTYPE=Debug&#34;, or perform intl or benchmark tests via make test-v8-intl or test-v8-benchmarks respectively. Note that by default, quickcheck and TAP output are disabled, and i18n is enabled. To activate these options, use options&#34;QUICKCHECK=True&#34; and &#34;ENABLE_V8_TAP=True&#34; respectively. Use &#34;DISABLE_V8_I18N&#34; to disable i18n. Use V8_BUILD_OPTIONS to allow custom user-defined flags to be appended onto &#34;make v8&#34;. Any tests performed after changes to the packaged v8 file will require recompiling of v8, which can be done using &#34;make v8 DESTCPU=(ARCH)&#34;. Finally, two additional files necessary for one of the v8 tests have been added to the v8 folder. PR-URL: https://github.com/nodejs/node/pull/4704 Reviewed-By: James M Snell &lt;jasnell@gmail.com&gt; Reviewed-By: Michael Dawson &lt;michael_dawson@ca.ibm.com&gt; Reviewed-By: Ben Noordhuis &lt;info@bnoordhuis.nl&gt; Reviewed-By: targos - Michaël Zasso &lt;mic.besace@gmail.com&gt;
10 years ago
--no-presubmit \
--shell-dir=$(PWD)/deps/v8/out/$(V8_ARCH).$(BUILDTYPE_LOWER) \
$(TAP_V8)
test-v8-intl: v8
test: run v8 tests from node tree Ported by exinfinitum from a PR by jasnell: see https://github.com/nodejs/node-v0.x-archive/pull/14185 Allows the running of v8 tests on node&#39;s packaged v8 source code. Note that the limited win32 support added by jasnell has NOT been ported, and so these tests are currently UNIX ONLY. Note that gclient depot tools (see https://commondatastorage.googleapis.com/ chrome-infra-docs/flat/depot_tools/docs/html/ depot_tools_tutorial.html#_setting_up) and subversion are required to run tests. To perform tests, run the following commands: make v8 DESTCPU=(ARCH) make test-v8 DESTCPU=(ARCH) where (ARCH) is your CPU architecture, e.g. x64, ia32. DESTCPU MUST be specified for this to work properly. Can also do tests on debug build by using &#34;make test-v8 DESTCPU=(ARCH) BUILDTYPE=Debug&#34;, or perform intl or benchmark tests via make test-v8-intl or test-v8-benchmarks respectively. Note that by default, quickcheck and TAP output are disabled, and i18n is enabled. To activate these options, use options&#34;QUICKCHECK=True&#34; and &#34;ENABLE_V8_TAP=True&#34; respectively. Use &#34;DISABLE_V8_I18N&#34; to disable i18n. Use V8_BUILD_OPTIONS to allow custom user-defined flags to be appended onto &#34;make v8&#34;. Any tests performed after changes to the packaged v8 file will require recompiling of v8, which can be done using &#34;make v8 DESTCPU=(ARCH)&#34;. Finally, two additional files necessary for one of the v8 tests have been added to the v8 folder. PR-URL: https://github.com/nodejs/node/pull/4704 Reviewed-By: James M Snell &lt;jasnell@gmail.com&gt; Reviewed-By: Michael Dawson &lt;michael_dawson@ca.ibm.com&gt; Reviewed-By: Ben Noordhuis &lt;info@bnoordhuis.nl&gt; Reviewed-By: targos - Michaël Zasso &lt;mic.besace@gmail.com&gt;
10 years ago
# note: performs full test unless QUICKCHECK is specified
deps/v8/tools/run-tests.py --arch=$(V8_ARCH) \
--mode=$(BUILDTYPE_LOWER) --no-presubmit $(QUICKCHECK_ARG) \
--shell-dir=deps/v8/out/$(V8_ARCH).$(BUILDTYPE_LOWER) intl \
$(TAP_V8_INTL)
test-v8-benchmarks: v8
test: run v8 tests from node tree Ported by exinfinitum from a PR by jasnell: see https://github.com/nodejs/node-v0.x-archive/pull/14185 Allows the running of v8 tests on node&#39;s packaged v8 source code. Note that the limited win32 support added by jasnell has NOT been ported, and so these tests are currently UNIX ONLY. Note that gclient depot tools (see https://commondatastorage.googleapis.com/ chrome-infra-docs/flat/depot_tools/docs/html/ depot_tools_tutorial.html#_setting_up) and subversion are required to run tests. To perform tests, run the following commands: make v8 DESTCPU=(ARCH) make test-v8 DESTCPU=(ARCH) where (ARCH) is your CPU architecture, e.g. x64, ia32. DESTCPU MUST be specified for this to work properly. Can also do tests on debug build by using &#34;make test-v8 DESTCPU=(ARCH) BUILDTYPE=Debug&#34;, or perform intl or benchmark tests via make test-v8-intl or test-v8-benchmarks respectively. Note that by default, quickcheck and TAP output are disabled, and i18n is enabled. To activate these options, use options&#34;QUICKCHECK=True&#34; and &#34;ENABLE_V8_TAP=True&#34; respectively. Use &#34;DISABLE_V8_I18N&#34; to disable i18n. Use V8_BUILD_OPTIONS to allow custom user-defined flags to be appended onto &#34;make v8&#34;. Any tests performed after changes to the packaged v8 file will require recompiling of v8, which can be done using &#34;make v8 DESTCPU=(ARCH)&#34;. Finally, two additional files necessary for one of the v8 tests have been added to the v8 folder. PR-URL: https://github.com/nodejs/node/pull/4704 Reviewed-By: James M Snell &lt;jasnell@gmail.com&gt; Reviewed-By: Michael Dawson &lt;michael_dawson@ca.ibm.com&gt; Reviewed-By: Ben Noordhuis &lt;info@bnoordhuis.nl&gt; Reviewed-By: targos - Michaël Zasso &lt;mic.besace@gmail.com&gt;
10 years ago
deps/v8/tools/run-tests.py --arch=$(V8_ARCH) --mode=$(BUILDTYPE_LOWER) \
--download-data $(QUICKCHECK_ARG) --no-presubmit \
--shell-dir=deps/v8/out/$(V8_ARCH).$(BUILDTYPE_LOWER) benchmarks \
$(TAP_V8_BENCHMARKS)
test-v8-all: test-v8 test-v8-intl test-v8-benchmarks
# runs all v8 tests
else
test-v8 test-v8-intl test-v8-benchmarks test-v8-all:
@echo "Testing v8 is not available through the source tarball."
@echo "Use the git repo instead:" \
"$ git clone https://github.com/nodejs/node.git"
endif
test: run v8 tests from node tree Ported by exinfinitum from a PR by jasnell: see https://github.com/nodejs/node-v0.x-archive/pull/14185 Allows the running of v8 tests on node&#39;s packaged v8 source code. Note that the limited win32 support added by jasnell has NOT been ported, and so these tests are currently UNIX ONLY. Note that gclient depot tools (see https://commondatastorage.googleapis.com/ chrome-infra-docs/flat/depot_tools/docs/html/ depot_tools_tutorial.html#_setting_up) and subversion are required to run tests. To perform tests, run the following commands: make v8 DESTCPU=(ARCH) make test-v8 DESTCPU=(ARCH) where (ARCH) is your CPU architecture, e.g. x64, ia32. DESTCPU MUST be specified for this to work properly. Can also do tests on debug build by using &#34;make test-v8 DESTCPU=(ARCH) BUILDTYPE=Debug&#34;, or perform intl or benchmark tests via make test-v8-intl or test-v8-benchmarks respectively. Note that by default, quickcheck and TAP output are disabled, and i18n is enabled. To activate these options, use options&#34;QUICKCHECK=True&#34; and &#34;ENABLE_V8_TAP=True&#34; respectively. Use &#34;DISABLE_V8_I18N&#34; to disable i18n. Use V8_BUILD_OPTIONS to allow custom user-defined flags to be appended onto &#34;make v8&#34;. Any tests performed after changes to the packaged v8 file will require recompiling of v8, which can be done using &#34;make v8 DESTCPU=(ARCH)&#34;. Finally, two additional files necessary for one of the v8 tests have been added to the v8 folder. PR-URL: https://github.com/nodejs/node/pull/4704 Reviewed-By: James M Snell &lt;jasnell@gmail.com&gt; Reviewed-By: Michael Dawson &lt;michael_dawson@ca.ibm.com&gt; Reviewed-By: Ben Noordhuis &lt;info@bnoordhuis.nl&gt; Reviewed-By: targos - Michaël Zasso &lt;mic.besace@gmail.com&gt;
10 years ago
apidoc_sources = $(wildcard doc/api/*.md)
apidocs = $(addprefix out/,$(apidoc_sources:.md=.html)) \
$(addprefix out/,$(apidoc_sources:.md=.json))
apidoc_dirs = out/doc out/doc/api/ out/doc/api/assets
14 years ago
apiassets = $(subst api_assets,api/assets,$(addprefix out/,$(wildcard doc/api_assets/*)))
doc-only: $(apidoc_dirs) $(apiassets) $(apidocs) tools/doc/
doc: $(NODE_EXE) doc-only
$(apidoc_dirs):
mkdir -p $@
14 years ago
out/doc/api/assets/%: doc/api_assets/% out/doc/api/assets/
cp $< $@
out/doc/%: doc/%
cp -r $< $@
# check if ./node is actually set, else use user pre-installed binary
gen-json = tools/doc/generate.js --format=json $< > $@
out/doc/api/%.json: doc/api/%.md
[ -e tools/doc/node_modules/js-yaml/package.json ] || \
[ -e tools/eslint/node_modules/js-yaml/package.json ] || \
if [ -x $(NODE) ]; then \
cd tools/doc && ../../$(NODE) ../../$(NPM) install; \
else \
cd tools/doc && node ../../$(NPM) install; \
fi
[ -x $(NODE) ] && $(NODE) $(gen-json) || node $(gen-json)
# check if ./node is actually set, else use user pre-installed binary
gen-html = tools/doc/generate.js --node-version=$(FULLVERSION) --format=html --template=doc/template.html $< > $@
out/doc/api/%.html: doc/api/%.md
[ -e tools/doc/node_modules/js-yaml/package.json ] || \
[ -e tools/eslint/node_modules/js-yaml/package.json ] || \
if [ -x $(NODE) ]; then \
cd tools/doc && ../../$(NODE) ../../$(NPM) install; \
else \
cd tools/doc && node ../../$(NPM) install; \
fi
[ -x $(NODE) ] && $(NODE) $(gen-html) || node $(gen-html)
docopen: out/doc/api/all.html
-google-chrome out/doc/api/all.html
docclean:
-rm -rf out/doc
build-ci:
$(PYTHON) ./configure $(CONFIG_FLAGS)
$(MAKE)
run-ci: build-ci
$(MAKE) test-ci
RAWVER=$(shell $(PYTHON) tools/getnodeversion.py)
VERSION=v$(RAWVER)
# For nightly builds, you must set DISTTYPE to "nightly", "next-nightly" or
# "custom". For the nightly and next-nightly case, you need to set DATESTRING
# and COMMIT in order to properly name the build.
# For the rc case you need to set CUSTOMTAG to an appropriate CUSTOMTAG number
ifndef DISTTYPE
DISTTYPE=release
endif
ifeq ($(DISTTYPE),release)
FULLVERSION=$(VERSION)
else # ifeq ($(DISTTYPE),release)
ifeq ($(DISTTYPE),custom)
ifndef CUSTOMTAG
$(error CUSTOMTAG is not set for DISTTYPE=custom)
endif # ifndef CUSTOMTAG
TAG=$(CUSTOMTAG)
else # ifeq ($(DISTTYPE),custom)
ifndef DATESTRING
$(error DATESTRING is not set for nightly)
endif # ifndef DATESTRING
ifndef COMMIT
$(error COMMIT is not set for nightly)
endif # ifndef COMMIT
ifneq ($(DISTTYPE),nightly)
ifneq ($(DISTTYPE),next-nightly)
$(error DISTTYPE is not release, custom, nightly or next-nightly)
endif # ifneq ($(DISTTYPE),next-nightly)
endif # ifneq ($(DISTTYPE),nightly)
TAG=$(DISTTYPE)$(DATESTRING)$(COMMIT)
endif # ifeq ($(DISTTYPE),custom)
FULLVERSION=$(VERSION)-$(TAG)
endif # ifeq ($(DISTTYPE),release)
DISTTYPEDIR ?= $(DISTTYPE)
RELEASE=$(shell sed -ne 's/\#define NODE_VERSION_IS_RELEASE \([01]\)/\1/p' src/node_version.h)
PLATFORM=$(shell uname | tr '[:upper:]' '[:lower:]')
NPMVERSION=v$(shell cat deps/npm/package.json | grep '"version"' | sed 's/^[^:]*: "\([^"]*\)",.*/\1/')
UNAME_M=$(shell uname -m)
ifeq ($(findstring x86_64,$(UNAME_M)),x86_64)
DESTCPU ?= x64
else
ifeq ($(findstring ppc64,$(UNAME_M)),ppc64)
DESTCPU ?= ppc64
else
ifeq ($(findstring ppc,$(UNAME_M)),ppc)
DESTCPU ?= ppc
else
ifeq ($(findstring s390x,$(UNAME_M)),s390x)
DESTCPU ?= s390x
else
ifeq ($(findstring s390,$(UNAME_M)),s390)
DESTCPU ?= s390
else
ifeq ($(findstring arm,$(UNAME_M)),arm)
DESTCPU ?= arm
else
ifeq ($(findstring aarch64,$(UNAME_M)),aarch64)
DESTCPU ?= aarch64
else
ifeq ($(findstring powerpc,$(shell uname -p)),powerpc)
DESTCPU ?= ppc64
else
DESTCPU ?= x86
endif
endif
endif
endif
endif
endif
endif
endif
ifeq ($(DESTCPU),x64)
ARCH=x64
else
ifeq ($(DESTCPU),arm)
ARCH=arm
else
ifeq ($(DESTCPU),aarch64)
ARCH=arm64
else
ifeq ($(DESTCPU),ppc64)
ARCH=ppc64
else
ifeq ($(DESTCPU),ppc)
ARCH=ppc
else
ifeq ($(DESTCPU),s390)
ARCH=s390
else
ifeq ($(DESTCPU),s390x)
ARCH=s390x
else
ARCH=x86
endif
endif
endif
endif
endif
endif
endif
test: run v8 tests from node tree Ported by exinfinitum from a PR by jasnell: see https://github.com/nodejs/node-v0.x-archive/pull/14185 Allows the running of v8 tests on node&#39;s packaged v8 source code. Note that the limited win32 support added by jasnell has NOT been ported, and so these tests are currently UNIX ONLY. Note that gclient depot tools (see https://commondatastorage.googleapis.com/ chrome-infra-docs/flat/depot_tools/docs/html/ depot_tools_tutorial.html#_setting_up) and subversion are required to run tests. To perform tests, run the following commands: make v8 DESTCPU=(ARCH) make test-v8 DESTCPU=(ARCH) where (ARCH) is your CPU architecture, e.g. x64, ia32. DESTCPU MUST be specified for this to work properly. Can also do tests on debug build by using &#34;make test-v8 DESTCPU=(ARCH) BUILDTYPE=Debug&#34;, or perform intl or benchmark tests via make test-v8-intl or test-v8-benchmarks respectively. Note that by default, quickcheck and TAP output are disabled, and i18n is enabled. To activate these options, use options&#34;QUICKCHECK=True&#34; and &#34;ENABLE_V8_TAP=True&#34; respectively. Use &#34;DISABLE_V8_I18N&#34; to disable i18n. Use V8_BUILD_OPTIONS to allow custom user-defined flags to be appended onto &#34;make v8&#34;. Any tests performed after changes to the packaged v8 file will require recompiling of v8, which can be done using &#34;make v8 DESTCPU=(ARCH)&#34;. Finally, two additional files necessary for one of the v8 tests have been added to the v8 folder. PR-URL: https://github.com/nodejs/node/pull/4704 Reviewed-By: James M Snell &lt;jasnell@gmail.com&gt; Reviewed-By: Michael Dawson &lt;michael_dawson@ca.ibm.com&gt; Reviewed-By: Ben Noordhuis &lt;info@bnoordhuis.nl&gt; Reviewed-By: targos - Michaël Zasso &lt;mic.besace@gmail.com&gt;
10 years ago
# node and v8 use different arch names (e.g. node 'x86' vs v8 'ia32').
# pass the proper v8 arch name to $V8_ARCH based on user-specified $DESTCPU.
ifeq ($(DESTCPU),x86)
V8_ARCH=ia32
else
V8_ARCH ?= $(DESTCPU)
endif
# enforce "x86" over "ia32" as the generally accepted way of referring to 32-bit intel
ifeq ($(ARCH),ia32)
override ARCH=x86
endif
ifeq ($(DESTCPU),ia32)
override DESTCPU=x86
endif
TARNAME=node-$(FULLVERSION)
TARBALL=$(TARNAME).tar
# Custom user-specified variation, use it directly
ifdef VARIATION
BINARYNAME=$(TARNAME)-$(PLATFORM)-$(ARCH)-$(VARIATION)
else
BINARYNAME=$(TARNAME)-$(PLATFORM)-$(ARCH)
endif
BINARYTAR=$(BINARYNAME).tar
# OSX doesn't have xz installed by default, http://macpkg.sourceforge.net/
XZ=$(shell which xz > /dev/null 2>&1; echo $$?)
XZ_COMPRESSION ?= 9
PKG=$(TARNAME).pkg
PACKAGEMAKER ?= /Developer/Applications/Utilities/PackageMaker.app/Contents/MacOS/PackageMaker
PKGDIR=out/dist-osx
release-only:
@if [ "$(DISTTYPE)" != "nightly" ] && [ "$(DISTTYPE)" != "next-nightly" ] && \
`grep -q REPLACEME doc/api/*.md`; then \
echo 'Please update Added: tags in the documentation first.' ; \
exit 1 ; \
fi
@if [ "$(shell git status --porcelain | egrep -v '^\?\? ')" = "" ]; then \
exit 0 ; \
else \
echo "" >&2 ; \
echo "The git repository is not clean." >&2 ; \
echo "Please commit changes before building release tarball." >&2 ; \
echo "" >&2 ; \
git status --porcelain | egrep -v '^\?\?' >&2 ; \
echo "" >&2 ; \
exit 1 ; \
fi
@if [ "$(DISTTYPE)" != "release" -o "$(RELEASE)" = "1" ]; then \
exit 0; \
else \
echo "" >&2 ; \
echo "#NODE_VERSION_IS_RELEASE is set to $(RELEASE)." >&2 ; \
echo "Did you remember to update src/node_version.h?" >&2 ; \
echo "" >&2 ; \
exit 1 ; \
fi
$(PKG): release-only
rm -rf $(PKGDIR)
rm -rf out/deps out/Release
$(PYTHON) ./configure \
--dest-cpu=x64 \
--tag=$(TAG) \
--release-urlbase=$(RELEASE_URLBASE) \
$(CONFIG_FLAGS) $(BUILD_RELEASE_FLAGS)
$(MAKE) install V=$(V) DESTDIR=$(PKGDIR)
SIGN="$(CODESIGN_CERT)" PKGDIR="$(PKGDIR)" bash tools/osx-codesign.sh
cat tools/osx-pkg.pmdoc/index.xml.tmpl \
| sed -E "s/\\{nodeversion\\}/$(FULLVERSION)/g" \
| sed -E "s/\\{npmversion\\}/$(NPMVERSION)/g" \
> tools/osx-pkg.pmdoc/index.xml
$(PACKAGEMAKER) \
--id "org.nodejs.pkg" \
--doc tools/osx-pkg.pmdoc \
--out $(PKG)
SIGN="$(PRODUCTSIGN_CERT)" PKG="$(PKG)" bash tools/osx-productsign.sh
pkg: $(PKG)
pkg-upload: pkg
ssh $(STAGINGSERVER) "mkdir -p nodejs/$(DISTTYPEDIR)/$(FULLVERSION)"
chmod 664 node-$(FULLVERSION).pkg
scp -p node-$(FULLVERSION).pkg $(STAGINGSERVER):nodejs/$(DISTTYPEDIR)/$(FULLVERSION)/node-$(FULLVERSION).pkg
ssh $(STAGINGSERVER) "touch nodejs/$(DISTTYPEDIR)/$(FULLVERSION)/node-$(FULLVERSION).pkg.done"
$(TARBALL): release-only $(NODE_EXE) doc
git checkout-index -a -f --prefix=$(TARNAME)/
mkdir -p $(TARNAME)/doc/api
cp doc/node.1 $(TARNAME)/doc/node.1
cp -r out/doc/api/* $(TARNAME)/doc/api/
rm -rf $(TARNAME)/deps/v8/{test,samples,tools/profviz,tools/run-tests.py}
rm -rf $(TARNAME)/doc/images # too big
rm -rf $(TARNAME)/deps/uv/{docs,samples,test}
rm -rf $(TARNAME)/deps/openssl/openssl/{doc,demos,test}
rm -rf $(TARNAME)/deps/zlib/contrib # too big, unused
rm -rf $(TARNAME)/.{editorconfig,git*,mailmap}
rm -rf $(TARNAME)/tools/{eslint,eslint-rules,osx-pkg.pmdoc,pkgsrc}
rm -rf $(TARNAME)/tools/{osx-*,license-builder.sh,cpplint.py}
rm -rf $(TARNAME)/test*.tap
find $(TARNAME)/ -name ".eslint*" -maxdepth 2 | xargs rm
find $(TARNAME)/ -type l | xargs rm # annoying on windows
tar -cf $(TARNAME).tar $(TARNAME)
rm -rf $(TARNAME)
gzip -c -f -9 $(TARNAME).tar > $(TARNAME).tar.gz
ifeq ($(XZ), 0)
xz -c -f -$(XZ_COMPRESSION) $(TARNAME).tar > $(TARNAME).tar.xz
endif
rm $(TARNAME).tar
tar: $(TARBALL)
tar-upload: tar
ssh $(STAGINGSERVER) "mkdir -p nodejs/$(DISTTYPEDIR)/$(FULLVERSION)"
chmod 664 node-$(FULLVERSION).tar.gz
scp -p node-$(FULLVERSION).tar.gz $(STAGINGSERVER):nodejs/$(DISTTYPEDIR)/$(FULLVERSION)/node-$(FULLVERSION).tar.gz
ssh $(STAGINGSERVER) "touch nodejs/$(DISTTYPEDIR)/$(FULLVERSION)/node-$(FULLVERSION).tar.gz.done"
ifeq ($(XZ), 0)
chmod 664 node-$(FULLVERSION).tar.xz
scp -p node-$(FULLVERSION).tar.xz $(STAGINGSERVER):nodejs/$(DISTTYPEDIR)/$(FULLVERSION)/node-$(FULLVERSION).tar.xz
ssh $(STAGINGSERVER) "touch nodejs/$(DISTTYPEDIR)/$(FULLVERSION)/node-$(FULLVERSION).tar.xz.done"
endif
doc-upload: tar
ssh $(STAGINGSERVER) "mkdir -p nodejs/$(DISTTYPEDIR)/$(FULLVERSION)"
chmod -R ug=rw-x+X,o=r+X out/doc/
scp -pr out/doc/ $(STAGINGSERVER):nodejs/$(DISTTYPEDIR)/$(FULLVERSION)/docs/
ssh $(STAGINGSERVER) "touch nodejs/$(DISTTYPEDIR)/$(FULLVERSION)/docs.done"
$(TARBALL)-headers: release-only
$(PYTHON) ./configure \
--prefix=/ \
--dest-cpu=$(DESTCPU) \
--tag=$(TAG) \
--release-urlbase=$(RELEASE_URLBASE) \
$(CONFIG_FLAGS) $(BUILD_RELEASE_FLAGS)
HEADERS_ONLY=1 $(PYTHON) tools/install.py install '$(TARNAME)' '/'
find $(TARNAME)/ -type l | xargs rm -f
tar -cf $(TARNAME)-headers.tar $(TARNAME)
rm -rf $(TARNAME)
gzip -c -f -9 $(TARNAME)-headers.tar > $(TARNAME)-headers.tar.gz
ifeq ($(XZ), 0)
xz -c -f -$(XZ_COMPRESSION) $(TARNAME)-headers.tar > $(TARNAME)-headers.tar.xz
endif
rm $(TARNAME)-headers.tar
tar-headers: $(TARBALL)-headers
tar-headers-upload: tar-headers
ssh $(STAGINGSERVER) "mkdir -p nodejs/$(DISTTYPEDIR)/$(FULLVERSION)"
chmod 664 $(TARNAME)-headers.tar.gz
scp -p $(TARNAME)-headers.tar.gz $(STAGINGSERVER):nodejs/$(DISTTYPEDIR)/$(FULLVERSION)/$(TARNAME)-headers.tar.gz
ssh $(STAGINGSERVER) "touch nodejs/$(DISTTYPEDIR)/$(FULLVERSION)/$(TARNAME)-headers.tar.gz.done"
ifeq ($(XZ), 0)
chmod 664 $(TARNAME)-headers.tar.xz
scp -p $(TARNAME)-headers.tar.xz $(STAGINGSERVER):nodejs/$(DISTTYPEDIR)/$(FULLVERSION)/$(TARNAME)-headers.tar.xz
ssh $(STAGINGSERVER) "touch nodejs/$(DISTTYPEDIR)/$(FULLVERSION)/$(TARNAME)-headers.tar.xz.done"
endif
$(BINARYTAR): release-only
rm -rf $(BINARYNAME)
rm -rf out/deps out/Release
$(PYTHON) ./configure \
--prefix=/ \
--dest-cpu=$(DESTCPU) \
--tag=$(TAG) \
--release-urlbase=$(RELEASE_URLBASE) \
$(CONFIG_FLAGS) $(BUILD_RELEASE_FLAGS)
$(MAKE) install DESTDIR=$(BINARYNAME) V=$(V) PORTABLE=1
cp README.md $(BINARYNAME)
cp LICENSE $(BINARYNAME)
cp CHANGELOG.md $(BINARYNAME)
tar -cf $(BINARYNAME).tar $(BINARYNAME)
rm -rf $(BINARYNAME)
gzip -c -f -9 $(BINARYNAME).tar > $(BINARYNAME).tar.gz
ifeq ($(XZ), 0)
xz -c -f -$(XZ_COMPRESSION) $(BINARYNAME).tar > $(BINARYNAME).tar.xz
endif
rm $(BINARYNAME).tar
binary: $(BINARYTAR)
binary-upload: binary
ssh $(STAGINGSERVER) "mkdir -p nodejs/$(DISTTYPEDIR)/$(FULLVERSION)"
chmod 664 node-$(FULLVERSION)-$(OSTYPE)-$(ARCH).tar.gz
scp -p node-$(FULLVERSION)-$(OSTYPE)-$(ARCH).tar.gz $(STAGINGSERVER):nodejs/$(DISTTYPEDIR)/$(FULLVERSION)/node-$(FULLVERSION)-$(OSTYPE)-$(ARCH).tar.gz
ssh $(STAGINGSERVER) "touch nodejs/$(DISTTYPEDIR)/$(FULLVERSION)/node-$(FULLVERSION)-$(OSTYPE)-$(ARCH).tar.gz.done"
ifeq ($(XZ), 0)
chmod 664 node-$(FULLVERSION)-$(OSTYPE)-$(ARCH).tar.xz
scp -p node-$(FULLVERSION)-$(OSTYPE)-$(ARCH).tar.xz $(STAGINGSERVER):nodejs/$(DISTTYPEDIR)/$(FULLVERSION)/node-$(FULLVERSION)-$(OSTYPE)-$(ARCH).tar.xz
ssh $(STAGINGSERVER) "touch nodejs/$(DISTTYPEDIR)/$(FULLVERSION)/node-$(FULLVERSION)-$(OSTYPE)-$(ARCH).tar.xz.done"
endif
bench-net: all
@$(NODE) benchmark/run.js net
bench-crypto: all
@$(NODE) benchmark/run.js crypto
bench-tls: all
@$(NODE) benchmark/run.js tls
bench-http: all
@$(NODE) benchmark/run.js http
bench-fs: all
@$(NODE) benchmark/run.js fs
bench-misc: all
@$(MAKE) -C benchmark/misc/function_call/
@$(NODE) benchmark/run.js misc
bench-array: all
@$(NODE) benchmark/run.js arrays
bench-buffer: all
@$(NODE) benchmark/run.js buffers
bench-url: all
@$(NODE) benchmark/run.js url
bench-events: all
@$(NODE) benchmark/run.js events
bench-util: all
@$(NODE) benchmark/run.js util
bench-dgram: all
@$(NODE) benchmark/run.js dgram
bench-all: bench bench-misc bench-array bench-buffer bench-url bench-events bench-dgram bench-util
bench: bench-net bench-http bench-fs bench-tls
bench-ci: bench
jslint:
$(NODE) tools/eslint/bin/eslint.js --cache --rulesdir=tools/eslint-rules \
benchmark lib test tools
jslint-ci:
$(NODE) tools/jslint.js $(PARALLEL_ARGS) -f tap -o test-eslint.tap \
benchmark lib test tools
CPPLINT_EXCLUDE ?=
CPPLINT_EXCLUDE += src/node_root_certs.h
CPPLINT_EXCLUDE += src/queue.h
CPPLINT_EXCLUDE += src/tree.h
CPPLINT_EXCLUDE += $(wildcard test/addons/??_*/*.cc test/addons/??_*/*.h)
CPPLINT_FILES = $(filter-out $(CPPLINT_EXCLUDE), $(wildcard \
src/*.c \
src/*.cc \
src/*.h \
test/addons/*/*.cc \
test/addons/*/*.h \
tools/icu/*.cc \
tools/icu/*.h \
))
cpplint:
@$(PYTHON) tools/cpplint.py $(CPPLINT_FILES)
@$(PYTHON) tools/check-imports.py
ifneq ("","$(wildcard tools/eslint/lib/eslint.js)")
lint: jslint cpplint
CONFLICT_RE=^>>>>>>> [0-9A-Fa-f]+|^<<<<<<< [A-Za-z]+
lint-ci: jslint-ci cpplint
@if ! ( grep -IEqrs "$(CONFLICT_RE)" benchmark deps doc lib src test tools ) \
&& ! ( find . -maxdepth 1 -type f | xargs grep -IEqs "$(CONFLICT_RE)" ); then \
exit 0 ; \
else \
echo "" >&2 ; \
echo "Conflict marker detected in one or more files. Please fix them first." >&2 ; \
exit 1 ; \
fi
else
lint:
@echo "Linting is not available through the source tarball."
@echo "Use the git repo instead:" \
"$ git clone https://github.com/nodejs/node.git"
lint-ci: lint
endif
.PHONY: lint cpplint jslint bench clean docopen docclean doc dist distclean \
check uninstall install install-includes install-bin all staticlib \
dynamiclib test test-all test-addons build-addons website-upload pkg \
blog blogclean tar binary release-only bench-http-simple bench-idle \
bench-all bench bench-misc bench-array bench-buffer bench-net \
test: run v8 tests from node tree Ported by exinfinitum from a PR by jasnell: see https://github.com/nodejs/node-v0.x-archive/pull/14185 Allows the running of v8 tests on node&#39;s packaged v8 source code. Note that the limited win32 support added by jasnell has NOT been ported, and so these tests are currently UNIX ONLY. Note that gclient depot tools (see https://commondatastorage.googleapis.com/ chrome-infra-docs/flat/depot_tools/docs/html/ depot_tools_tutorial.html#_setting_up) and subversion are required to run tests. To perform tests, run the following commands: make v8 DESTCPU=(ARCH) make test-v8 DESTCPU=(ARCH) where (ARCH) is your CPU architecture, e.g. x64, ia32. DESTCPU MUST be specified for this to work properly. Can also do tests on debug build by using &#34;make test-v8 DESTCPU=(ARCH) BUILDTYPE=Debug&#34;, or perform intl or benchmark tests via make test-v8-intl or test-v8-benchmarks respectively. Note that by default, quickcheck and TAP output are disabled, and i18n is enabled. To activate these options, use options&#34;QUICKCHECK=True&#34; and &#34;ENABLE_V8_TAP=True&#34; respectively. Use &#34;DISABLE_V8_I18N&#34; to disable i18n. Use V8_BUILD_OPTIONS to allow custom user-defined flags to be appended onto &#34;make v8&#34;. Any tests performed after changes to the packaged v8 file will require recompiling of v8, which can be done using &#34;make v8 DESTCPU=(ARCH)&#34;. Finally, two additional files necessary for one of the v8 tests have been added to the v8 folder. PR-URL: https://github.com/nodejs/node/pull/4704 Reviewed-By: James M Snell &lt;jasnell@gmail.com&gt; Reviewed-By: Michael Dawson &lt;michael_dawson@ca.ibm.com&gt; Reviewed-By: Ben Noordhuis &lt;info@bnoordhuis.nl&gt; Reviewed-By: targos - Michaël Zasso &lt;mic.besace@gmail.com&gt;
10 years ago
bench-http bench-fs bench-tls cctest run-ci test-v8 test-v8-intl \
test-v8-benchmarks test-v8-all v8 lint-ci bench-ci jslint-ci doc-only \
$(TARBALL)-headers test-ci test-ci-native test-ci-js build-ci