build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
# Copyright (c) IBM Corporation and Others. All Rights Reserved.
|
|
|
|
# very loosely based on icu.gyp from Chromium:
|
|
|
|
# Copyright (c) 2012 The Chromium Authors. All rights reserved.
|
|
|
|
# Use of this source code is governed by a BSD-style license that can be
|
|
|
|
# found in the LICENSE file.
|
|
|
|
|
|
|
|
|
|
|
|
{
|
|
|
|
'variables': {
|
|
|
|
'icu_src_derb': [
|
|
|
|
'<(icu_path)/source/tools/genrb/derb.c',
|
|
|
|
'<(icu_path)/source/tools/genrb/derb.cpp'
|
|
|
|
],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
},
|
|
|
|
'includes': [ '../../icu_config.gypi' ],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
'targets': [
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
{
|
|
|
|
# a target for additional uconfig defines, target only
|
|
|
|
'target_name': 'icu_uconfig_target',
|
|
|
|
'type': 'none',
|
|
|
|
'toolsets': [ 'target' ],
|
|
|
|
'direct_dependent_settings': {
|
|
|
|
'defines': [
|
|
|
|
'UCONFIG_NO_CONVERSION=1',
|
|
|
|
]
|
|
|
|
},
|
|
|
|
},
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
{
|
|
|
|
# a target to hold uconfig defines.
|
|
|
|
# for now these are hard coded, but could be defined.
|
|
|
|
'target_name': 'icu_uconfig',
|
|
|
|
'type': 'none',
|
|
|
|
'toolsets': [ 'host', 'target' ],
|
|
|
|
'direct_dependent_settings': {
|
|
|
|
'conditions': [
|
|
|
|
[ 'icu_endianness == "l"', {
|
|
|
|
'defines': [
|
|
|
|
# ICU cannot swap the initial data without this.
|
|
|
|
# http://bugs.icu-project.org/trac/ticket/11046
|
|
|
|
'UCONFIG_NO_LEGACY_CONVERSION=1',
|
|
|
|
'UCONFIG_NO_IDNA=1',
|
|
|
|
],
|
|
|
|
}],
|
|
|
|
],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
'defines': [
|
|
|
|
'UCONFIG_NO_TRANSLITERATION=1',
|
|
|
|
'UCONFIG_NO_SERVICE=1',
|
|
|
|
'UCONFIG_NO_REGULAR_EXPRESSIONS=1',
|
|
|
|
'U_ENABLE_DYLOAD=0',
|
|
|
|
'U_STATIC_IMPLEMENTATION=1',
|
|
|
|
# Don't need std::string in API.
|
|
|
|
# Also, problematic: <http://bugs.icu-project.org/trac/ticket/11333>
|
|
|
|
'U_HAVE_STD_STRING=0',
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
# TODO(srl295): reenable following pending
|
|
|
|
# https://code.google.com/p/v8/issues/detail?id=3345
|
|
|
|
# (saves some space)
|
|
|
|
'UCONFIG_NO_BREAK_ITERATION=0',
|
|
|
|
],
|
|
|
|
}
|
|
|
|
},
|
|
|
|
{
|
|
|
|
# a target to hold common settings.
|
|
|
|
# make any target that is ICU implementation depend on this.
|
|
|
|
'target_name': 'icu_implementation',
|
|
|
|
'toolsets': [ 'host', 'target' ],
|
|
|
|
'type': 'none',
|
|
|
|
'direct_dependent_settings': {
|
|
|
|
'conditions': [
|
|
|
|
[ 'os_posix == 1 and OS != "mac" and OS != "ios"', {
|
|
|
|
'cflags': [ '-Wno-deprecated-declarations' ],
|
|
|
|
'cflags_cc': [ '-frtti' ],
|
|
|
|
}],
|
|
|
|
[ 'OS == "mac" or OS == "ios"', {
|
|
|
|
'xcode_settings': {'GCC_ENABLE_CPP_RTTI': 'YES' },
|
|
|
|
}],
|
|
|
|
[ 'OS == "win"', {
|
|
|
|
'msvs_settings': {
|
|
|
|
'VCCLCompilerTool': {'RuntimeTypeInfo': 'true'},
|
|
|
|
}
|
|
|
|
}],
|
|
|
|
],
|
|
|
|
'msvs_settings': {
|
|
|
|
'VCCLCompilerTool': {
|
|
|
|
'RuntimeTypeInfo': 'true',
|
|
|
|
'ExceptionHandling': '1',
|
|
|
|
},
|
|
|
|
},
|
|
|
|
'configurations': {
|
|
|
|
# TODO: why does this need to be redefined for Release and Debug?
|
|
|
|
# Maybe this should be pushed into common.gypi with an "if v8 i18n"?
|
|
|
|
'Release': {
|
|
|
|
'msvs_settings': {
|
|
|
|
'VCCLCompilerTool': {
|
|
|
|
'RuntimeTypeInfo': 'true',
|
|
|
|
'ExceptionHandling': '1',
|
|
|
|
},
|
|
|
|
},
|
|
|
|
},
|
|
|
|
'Debug': {
|
|
|
|
'msvs_settings': {
|
|
|
|
'VCCLCompilerTool': {
|
|
|
|
'RuntimeTypeInfo': 'true',
|
|
|
|
'ExceptionHandling': '1',
|
|
|
|
},
|
|
|
|
},
|
|
|
|
},
|
|
|
|
},
|
|
|
|
'defines': [
|
|
|
|
'U_ATTRIBUTE_DEPRECATED=',
|
|
|
|
'_CRT_SECURE_NO_DEPRECATE=',
|
|
|
|
'U_STATIC_IMPLEMENTATION=1',
|
|
|
|
],
|
|
|
|
},
|
|
|
|
},
|
|
|
|
{
|
|
|
|
'target_name': 'icui18n',
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
'toolsets': [ 'target', 'host' ],
|
|
|
|
'conditions' : [
|
|
|
|
['_toolset=="target"', {
|
|
|
|
'type': '<(library)',
|
|
|
|
'sources': [
|
|
|
|
'<@(icu_src_i18n)'
|
|
|
|
],
|
|
|
|
## if your compiler can dead-strip, these exclusions will
|
|
|
|
## make ZERO difference to binary size.
|
|
|
|
## Made ICU-specific for future-proofing.
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
'conditions': [
|
|
|
|
[ 'icu_ver_major == 55', { 'sources!': [
|
|
|
|
# alphabetic index
|
|
|
|
'<(icu_path)/source/i18n/alphaindex.cpp',
|
|
|
|
# BOCSU
|
|
|
|
# misc
|
|
|
|
'<(icu_path)/source/i18n/regexcmp.cpp',
|
|
|
|
'<(icu_path)/source/i18n/regexcmp.h',
|
|
|
|
'<(icu_path)/source/i18n/regexcst.h',
|
|
|
|
'<(icu_path)/source/i18n/regeximp.cpp',
|
|
|
|
'<(icu_path)/source/i18n/regeximp.h',
|
|
|
|
'<(icu_path)/source/i18n/regexst.cpp',
|
|
|
|
'<(icu_path)/source/i18n/regexst.h',
|
|
|
|
'<(icu_path)/source/i18n/regextxt.cpp',
|
|
|
|
'<(icu_path)/source/i18n/regextxt.h',
|
|
|
|
'<(icu_path)/source/i18n/region.cpp',
|
|
|
|
'<(icu_path)/source/i18n/region_impl.h',
|
|
|
|
'<(icu_path)/source/i18n/reldatefmt.cpp',
|
|
|
|
'<(icu_path)/source/i18n/reldatefmt.h'
|
|
|
|
'<(icu_path)/source/i18n/scientificformathelper.cpp',
|
|
|
|
'<(icu_path)/source/i18n/tmunit.cpp',
|
|
|
|
'<(icu_path)/source/i18n/tmutamt.cpp',
|
|
|
|
'<(icu_path)/source/i18n/tmutfmt.cpp',
|
|
|
|
'<(icu_path)/source/i18n/uregex.cpp',
|
|
|
|
'<(icu_path)/source/i18n/uregexc.cpp',
|
|
|
|
'<(icu_path)/source/i18n/uregion.cpp',
|
|
|
|
'<(icu_path)/source/i18n/uspoof.cpp',
|
|
|
|
'<(icu_path)/source/i18n/uspoof_build.cpp',
|
|
|
|
'<(icu_path)/source/i18n/uspoof_conf.cpp',
|
|
|
|
'<(icu_path)/source/i18n/uspoof_conf.h',
|
|
|
|
'<(icu_path)/source/i18n/uspoof_impl.cpp',
|
|
|
|
'<(icu_path)/source/i18n/uspoof_impl.h',
|
|
|
|
'<(icu_path)/source/i18n/uspoof_wsconf.cpp',
|
|
|
|
'<(icu_path)/source/i18n/uspoof_wsconf.h',
|
|
|
|
]}],
|
|
|
|
[ 'icu_ver_major == 57', { 'sources!': [
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
|
|
|
|
# alphabetic index
|
|
|
|
'<(icu_path)/source/i18n/alphaindex.cpp',
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
# BOCSU
|
|
|
|
# misc
|
|
|
|
'<(icu_path)/source/i18n/regexcmp.cpp',
|
|
|
|
'<(icu_path)/source/i18n/regexcmp.h',
|
|
|
|
'<(icu_path)/source/i18n/regexcst.h',
|
|
|
|
'<(icu_path)/source/i18n/regeximp.cpp',
|
|
|
|
'<(icu_path)/source/i18n/regeximp.h',
|
|
|
|
'<(icu_path)/source/i18n/regexst.cpp',
|
|
|
|
'<(icu_path)/source/i18n/regexst.h',
|
|
|
|
'<(icu_path)/source/i18n/regextxt.cpp',
|
|
|
|
'<(icu_path)/source/i18n/regextxt.h',
|
|
|
|
'<(icu_path)/source/i18n/region.cpp',
|
|
|
|
'<(icu_path)/source/i18n/region_impl.h',
|
|
|
|
'<(icu_path)/source/i18n/reldatefmt.cpp',
|
|
|
|
'<(icu_path)/source/i18n/reldatefmt.h'
|
|
|
|
'<(icu_path)/source/i18n/scientificformathelper.cpp',
|
|
|
|
'<(icu_path)/source/i18n/tmunit.cpp',
|
|
|
|
'<(icu_path)/source/i18n/tmutamt.cpp',
|
|
|
|
'<(icu_path)/source/i18n/tmutfmt.cpp',
|
|
|
|
'<(icu_path)/source/i18n/uregex.cpp',
|
|
|
|
'<(icu_path)/source/i18n/uregexc.cpp',
|
|
|
|
'<(icu_path)/source/i18n/uregion.cpp',
|
|
|
|
'<(icu_path)/source/i18n/uspoof.cpp',
|
|
|
|
'<(icu_path)/source/i18n/uspoof_build.cpp',
|
|
|
|
'<(icu_path)/source/i18n/uspoof_conf.cpp',
|
|
|
|
'<(icu_path)/source/i18n/uspoof_conf.h',
|
|
|
|
'<(icu_path)/source/i18n/uspoof_impl.cpp',
|
|
|
|
'<(icu_path)/source/i18n/uspoof_impl.h',
|
|
|
|
'<(icu_path)/source/i18n/uspoof_wsconf.cpp',
|
|
|
|
'<(icu_path)/source/i18n/uspoof_wsconf.h',
|
|
|
|
]}],
|
|
|
|
],
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
'include_dirs': [
|
|
|
|
'<(icu_path)/source/i18n',
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
],
|
|
|
|
'defines': [
|
|
|
|
'U_I18N_IMPLEMENTATION=1',
|
|
|
|
],
|
|
|
|
'dependencies': [ 'icuucx', 'icu_implementation', 'icu_uconfig', 'icu_uconfig_target' ],
|
|
|
|
'direct_dependent_settings': {
|
|
|
|
'include_dirs': [
|
|
|
|
'<(icu_path)/source/i18n',
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
],
|
|
|
|
},
|
|
|
|
'export_dependent_settings': [ 'icuucx', 'icu_uconfig_target' ],
|
|
|
|
}],
|
|
|
|
['_toolset=="host"', {
|
|
|
|
'type': 'none',
|
|
|
|
'dependencies': [ 'icutools' ],
|
|
|
|
'export_dependent_settings': [ 'icutools' ],
|
|
|
|
}],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
],
|
|
|
|
},
|
|
|
|
# This exports actual ICU data
|
|
|
|
{
|
|
|
|
'target_name': 'icudata',
|
|
|
|
'type': '<(library)',
|
|
|
|
'toolsets': [ 'target' ],
|
|
|
|
'conditions': [
|
|
|
|
[ 'OS == "win"', {
|
|
|
|
'conditions': [
|
|
|
|
[ 'icu_small == "false"', { # and OS=win
|
|
|
|
# full data - just build the full data file, then we are done.
|
|
|
|
'sources': [ '<(SHARED_INTERMEDIATE_DIR)/icudt<(icu_ver_major)<(icu_endianness)_dat.obj' ],
|
|
|
|
'dependencies': [ 'genccode#host' ],
|
|
|
|
'actions': [
|
|
|
|
{
|
|
|
|
'action_name': 'icudata',
|
|
|
|
'inputs': [ '<(icu_data_in)' ],
|
|
|
|
'outputs': [ '<(SHARED_INTERMEDIATE_DIR)/icudt<(icu_ver_major)<(icu_endianness)_dat.obj' ],
|
|
|
|
'action': [ '<(PRODUCT_DIR)/genccode',
|
|
|
|
'-o',
|
|
|
|
'-d', '<(SHARED_INTERMEDIATE_DIR)',
|
|
|
|
'-n', 'icudata',
|
|
|
|
'-e', 'icudt<(icu_ver_major)',
|
|
|
|
'<@(_inputs)' ],
|
|
|
|
},
|
|
|
|
],
|
|
|
|
}, { # icu_small == TRUE and OS == win
|
|
|
|
# link against stub data primarily
|
|
|
|
# then, use icupkg and genccode to rebuild data
|
|
|
|
'dependencies': [ 'icustubdata', 'genccode#host', 'icupkg#host', 'genrb#host', 'iculslocs#host' ],
|
|
|
|
'export_dependent_settings': [ 'icustubdata' ],
|
|
|
|
'actions': [
|
|
|
|
{
|
|
|
|
# trim down ICU
|
|
|
|
'action_name': 'icutrim',
|
|
|
|
'inputs': [ '<(icu_data_in)', 'icu_small.json' ],
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
'outputs': [ '<(SHARED_INTERMEDIATE_DIR)/icutmp/icudt<(icu_ver_major)<(icu_endianness).dat' ],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
'action': [ 'python',
|
|
|
|
'icutrim.py',
|
|
|
|
'-P', '../../<(CONFIGURATION_NAME)',
|
|
|
|
'-D', '<(icu_data_in)',
|
|
|
|
'--delete-tmp',
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
'-T', '<(SHARED_INTERMEDIATE_DIR)/icutmp',
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
'-F', 'icu_small.json',
|
|
|
|
'-O', 'icudt<(icu_ver_major)<(icu_endianness).dat',
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
'-v',
|
|
|
|
'-L', '<(icu_locales)'],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
},
|
|
|
|
{
|
|
|
|
# build final .dat -> .obj
|
|
|
|
'action_name': 'genccode',
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
'inputs': [ '<(SHARED_INTERMEDIATE_DIR)/icutmp/icudt<(icu_ver_major)<(icu_endianness).dat' ],
|
|
|
|
'outputs': [ '<(SHARED_INTERMEDIATE_DIR)/icudt<(icu_ver_major)<(icu_endianness)_dat.obj' ],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
'action': [ '../../<(CONFIGURATION_NAME)/genccode',
|
|
|
|
'-o',
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
'-d', '<(SHARED_INTERMEDIATE_DIR)/',
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
'-n', 'icudata',
|
|
|
|
'-e', 'icusmdt<(icu_ver_major)',
|
|
|
|
'<@(_inputs)' ],
|
|
|
|
},
|
|
|
|
],
|
|
|
|
# This file contains the small ICU data.
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
'sources': [ '<(SHARED_INTERMEDIATE_DIR)/icudt<(icu_ver_major)<(icu_endianness)_dat.obj' ],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
} ] ], #end of OS==win and icu_small == true
|
|
|
|
}, { # OS != win
|
|
|
|
'conditions': [
|
|
|
|
[ 'icu_small == "false"', {
|
|
|
|
# full data - just build the full data file, then we are done.
|
|
|
|
'sources': [ '<(SHARED_INTERMEDIATE_DIR)/icudt<(icu_ver_major)_dat.c' ],
|
|
|
|
'dependencies': [ 'genccode#host', 'icupkg#host', 'icu_implementation#host', 'icu_uconfig' ],
|
|
|
|
'include_dirs': [
|
|
|
|
'<(icu_path)/source/common',
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
],
|
|
|
|
'actions': [
|
|
|
|
{
|
|
|
|
# Swap endianness (if needed), or at least copy the file
|
|
|
|
'action_name': 'icupkg',
|
|
|
|
'inputs': [ '<(icu_data_in)' ],
|
|
|
|
'outputs':[ '<(SHARED_INTERMEDIATE_DIR)/icudt<(icu_ver_major)<(icu_endianness).dat' ],
|
|
|
|
'action': [ '<(PRODUCT_DIR)/icupkg',
|
|
|
|
'-t<(icu_endianness)',
|
|
|
|
'<@(_inputs)',
|
|
|
|
'<@(_outputs)',
|
|
|
|
],
|
|
|
|
},
|
|
|
|
{
|
|
|
|
# Rename without the endianness marker
|
|
|
|
'action_name': 'copy',
|
|
|
|
'inputs': [ '<(SHARED_INTERMEDIATE_DIR)/icudt<(icu_ver_major)<(icu_endianness).dat' ],
|
|
|
|
'outputs':[ '<(SHARED_INTERMEDIATE_DIR)/icudt<(icu_ver_major).dat' ],
|
|
|
|
'action': [ 'cp',
|
|
|
|
'<@(_inputs)',
|
|
|
|
'<@(_outputs)',
|
|
|
|
],
|
|
|
|
},
|
|
|
|
{
|
|
|
|
'action_name': 'icudata',
|
|
|
|
'inputs': [ '<(SHARED_INTERMEDIATE_DIR)/icudt<(icu_ver_major).dat' ],
|
|
|
|
'outputs':[ '<(SHARED_INTERMEDIATE_DIR)/icudt<(icu_ver_major)_dat.c' ],
|
|
|
|
'action': [ '<(PRODUCT_DIR)/genccode',
|
|
|
|
'-e', 'icudt<(icu_ver_major)',
|
|
|
|
'-d', '<(SHARED_INTERMEDIATE_DIR)',
|
|
|
|
'-f', 'icudt<(icu_ver_major)_dat',
|
|
|
|
'<@(_inputs)' ],
|
|
|
|
},
|
|
|
|
], # end actions
|
|
|
|
}, { # icu_small == true ( and OS != win )
|
|
|
|
# link against stub data (as primary data)
|
|
|
|
# then, use icupkg and genccode to rebuild small data
|
|
|
|
'dependencies': [ 'icustubdata', 'genccode#host', 'icupkg#host', 'genrb#host', 'iculslocs#host',
|
|
|
|
'icu_implementation', 'icu_uconfig' ],
|
|
|
|
'export_dependent_settings': [ 'icustubdata' ],
|
|
|
|
'actions': [
|
|
|
|
{
|
|
|
|
# trim down ICU
|
|
|
|
'action_name': 'icutrim',
|
|
|
|
'inputs': [ '<(icu_data_in)', 'icu_small.json' ],
|
|
|
|
'outputs': [ '<(SHARED_INTERMEDIATE_DIR)/icutmp/icudt<(icu_ver_major)<(icu_endianness).dat' ],
|
|
|
|
'action': [ 'python',
|
|
|
|
'icutrim.py',
|
|
|
|
'-P', '<(PRODUCT_DIR)',
|
|
|
|
'-D', '<(icu_data_in)',
|
|
|
|
'--delete-tmp',
|
|
|
|
'-T', '<(SHARED_INTERMEDIATE_DIR)/icutmp',
|
|
|
|
'-F', 'icu_small.json',
|
|
|
|
'-O', 'icudt<(icu_ver_major)<(icu_endianness).dat',
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
'-v',
|
|
|
|
'-L', '<(icu_locales)'],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
}, {
|
|
|
|
# rename to get the final entrypoint name right
|
|
|
|
'action_name': 'rename',
|
|
|
|
'inputs': [ '<(SHARED_INTERMEDIATE_DIR)/icutmp/icudt<(icu_ver_major)<(icu_endianness).dat' ],
|
|
|
|
'outputs': [ '<(SHARED_INTERMEDIATE_DIR)/icutmp/icusmdt<(icu_ver_major).dat' ],
|
|
|
|
'action': [ 'cp',
|
|
|
|
'<@(_inputs)',
|
|
|
|
'<@(_outputs)',
|
|
|
|
],
|
|
|
|
}, {
|
|
|
|
# build final .dat -> .obj
|
|
|
|
'action_name': 'genccode',
|
|
|
|
'inputs': [ '<(SHARED_INTERMEDIATE_DIR)/icutmp/icusmdt<(icu_ver_major).dat' ],
|
|
|
|
'outputs': [ '<(SHARED_INTERMEDIATE_DIR)/icusmdt<(icu_ver_major)_dat.c' ],
|
|
|
|
'action': [ '<(PRODUCT_DIR)/genccode',
|
|
|
|
'-d', '<(SHARED_INTERMEDIATE_DIR)',
|
|
|
|
'<@(_inputs)' ],
|
|
|
|
},
|
|
|
|
],
|
|
|
|
# This file contains the small ICU data
|
|
|
|
'sources': [ '<(SHARED_INTERMEDIATE_DIR)/icusmdt<(icu_ver_major)_dat.c' ],
|
|
|
|
# for umachine.h
|
|
|
|
'include_dirs': [
|
|
|
|
'<(icu_path)/source/common',
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
],
|
|
|
|
}]], # end icu_small == true
|
|
|
|
}]], # end OS != win
|
|
|
|
}, # end icudata
|
|
|
|
# icustubdata is a tiny (~1k) symbol with no ICU data in it.
|
|
|
|
# tools must link against it as they are generating the full data.
|
|
|
|
{
|
|
|
|
'target_name': 'icustubdata',
|
|
|
|
'type': '<(library)',
|
|
|
|
'toolsets': [ 'target' ],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
'dependencies': [ 'icu_implementation' ],
|
|
|
|
'sources': [
|
|
|
|
'<@(icu_src_stubdata)'
|
|
|
|
],
|
|
|
|
'include_dirs': [
|
|
|
|
'<(icu_path)/source/common',
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
],
|
|
|
|
},
|
|
|
|
# this target is for v8 consumption.
|
|
|
|
# it is icuuc + stubdata
|
|
|
|
# it is only built for target
|
|
|
|
{
|
|
|
|
'target_name': 'icuuc',
|
|
|
|
'type': 'none',
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
'toolsets': [ 'target', 'host' ],
|
|
|
|
'conditions' : [
|
|
|
|
['_toolset=="host"', {
|
|
|
|
'dependencies': [ 'icutools' ],
|
|
|
|
'export_dependent_settings': [ 'icutools' ],
|
|
|
|
}],
|
|
|
|
['_toolset=="target"', {
|
|
|
|
'dependencies': [ 'icuucx', 'icudata' ],
|
|
|
|
'export_dependent_settings': [ 'icuucx', 'icudata' ],
|
|
|
|
}],
|
|
|
|
],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
},
|
|
|
|
# This is the 'real' icuuc.
|
|
|
|
{
|
|
|
|
'target_name': 'icuucx',
|
|
|
|
'type': '<(library)',
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
'dependencies': [ 'icu_implementation', 'icu_uconfig', 'icu_uconfig_target' ],
|
|
|
|
'toolsets': [ 'target' ],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
'sources': [
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
'<@(icu_src_common)',
|
|
|
|
],
|
|
|
|
## if your compiler can dead-strip, this will
|
|
|
|
## make ZERO difference to binary size.
|
|
|
|
## Made ICU-specific for future-proofing.
|
|
|
|
'conditions': [
|
|
|
|
[ 'icu_ver_major == 55', { 'sources!': [
|
|
|
|
|
|
|
|
# bidi- not needed (yet!)
|
|
|
|
'<(icu_path)/source/common/ubidi.c',
|
|
|
|
'<(icu_path)/source/common/ubidiimp.h',
|
|
|
|
'<(icu_path)/source/common/ubidiln.c',
|
|
|
|
'<(icu_path)/source/common/ubidiwrt.c',
|
|
|
|
#'<(icu_path)/source/common/ubidi_props.c',
|
|
|
|
#'<(icu_path)/source/common/ubidi_props.h',
|
|
|
|
#'<(icu_path)/source/common/ubidi_props_data.h',
|
|
|
|
# and the callers
|
|
|
|
'<(icu_path)/source/common/ushape.cpp',
|
|
|
|
'<(icu_path)/source/common/usprep.cpp',
|
|
|
|
'<(icu_path)/source/common/uts46.cpp',
|
|
|
|
'<(icu_path)/source/common/uidna.cpp',
|
|
|
|
]}],
|
|
|
|
[ 'icu_ver_major == 57', { 'sources!': [
|
|
|
|
# work around http://bugs.icu-project.org/trac/ticket/12451
|
|
|
|
# (benign afterwards)
|
|
|
|
'<(icu_path)/source/common/cstr.cpp',
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
|
|
|
|
# bidi- not needed (yet!)
|
|
|
|
'<(icu_path)/source/common/ubidi.c',
|
|
|
|
'<(icu_path)/source/common/ubidiimp.h',
|
|
|
|
'<(icu_path)/source/common/ubidiln.c',
|
|
|
|
'<(icu_path)/source/common/ubidiwrt.c',
|
|
|
|
#'<(icu_path)/source/common/ubidi_props.c',
|
|
|
|
#'<(icu_path)/source/common/ubidi_props.h',
|
|
|
|
#'<(icu_path)/source/common/ubidi_props_data.h',
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
# and the callers
|
|
|
|
'<(icu_path)/source/common/ushape.cpp',
|
|
|
|
'<(icu_path)/source/common/usprep.cpp',
|
|
|
|
'<(icu_path)/source/common/uts46.cpp',
|
|
|
|
'<(icu_path)/source/common/uidna.cpp',
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
]}],
|
|
|
|
[ 'OS == "solaris"', { 'defines': [
|
|
|
|
'_XOPEN_SOURCE_EXTENDED=0',
|
|
|
|
]}],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
],
|
|
|
|
'include_dirs': [
|
|
|
|
'<(icu_path)/source/common',
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
],
|
|
|
|
'defines': [
|
|
|
|
'U_COMMON_IMPLEMENTATION=1',
|
|
|
|
],
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
'cflags_c': ['-std=c99'],
|
|
|
|
'export_dependent_settings': [ 'icu_uconfig', 'icu_uconfig_target' ],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
'direct_dependent_settings': {
|
|
|
|
'include_dirs': [
|
|
|
|
'<(icu_path)/source/common',
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
],
|
|
|
|
'conditions': [
|
|
|
|
[ 'OS=="win"', {
|
|
|
|
'link_settings': {
|
|
|
|
'libraries': [ '-lAdvAPI32.Lib', '-lUser32.lib' ],
|
|
|
|
},
|
|
|
|
}],
|
|
|
|
],
|
|
|
|
},
|
|
|
|
},
|
|
|
|
# tools library. This builds all of ICU together.
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
{
|
|
|
|
'target_name': 'icutools',
|
|
|
|
'type': '<(library)',
|
|
|
|
'toolsets': [ 'host' ],
|
|
|
|
'dependencies': [ 'icu_implementation', 'icu_uconfig' ],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
'sources': [
|
|
|
|
'<@(icu_src_tools)',
|
|
|
|
'<@(icu_src_common)',
|
|
|
|
'<@(icu_src_i18n)',
|
|
|
|
'<@(icu_src_io)',
|
|
|
|
'<@(icu_src_stubdata)',
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
],
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
'sources!': [
|
|
|
|
'<(icu_path)/source/tools/toolutil/udbgutil.cpp',
|
|
|
|
'<(icu_path)/source/tools/toolutil/udbgutil.h',
|
|
|
|
'<(icu_path)/source/tools/toolutil/dbgutil.cpp',
|
|
|
|
'<(icu_path)/source/tools/toolutil/dbgutil.h',
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
'include_dirs': [
|
|
|
|
'<(icu_path)/source/common',
|
|
|
|
'<(icu_path)/source/i18n',
|
|
|
|
'<(icu_path)/source/io',
|
|
|
|
'<(icu_path)/source/tools/toolutil',
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
],
|
|
|
|
'defines': [
|
|
|
|
'U_COMMON_IMPLEMENTATION=1',
|
|
|
|
'U_I18N_IMPLEMENTATION=1',
|
|
|
|
'U_IO_IMPLEMENTATION=1',
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
'U_TOOLUTIL_IMPLEMENTATION=1',
|
|
|
|
#'DEBUG=0', # http://bugs.icu-project.org/trac/ticket/10977
|
|
|
|
],
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
'cflags_c': ['-std=c99'],
|
|
|
|
'conditions': [
|
|
|
|
['OS == "solaris"', {
|
|
|
|
'defines': [ '_XOPEN_SOURCE_EXTENDED=0' ]
|
|
|
|
}]
|
|
|
|
],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
'direct_dependent_settings': {
|
|
|
|
'include_dirs': [
|
|
|
|
'<(icu_path)/source/common',
|
|
|
|
'<(icu_path)/source/i18n',
|
|
|
|
'<(icu_path)/source/io',
|
|
|
|
'<(icu_path)/source/tools/toolutil',
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
],
|
|
|
|
'conditions': [
|
|
|
|
[ 'OS=="win"', {
|
|
|
|
'link_settings': {
|
|
|
|
'libraries': [ '-lAdvAPI32.Lib', '-lUser32.lib' ],
|
|
|
|
},
|
|
|
|
}],
|
|
|
|
],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
},
|
build: i18n: add icu config options
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
10 years ago
|
|
|
'export_dependent_settings': [ 'icu_uconfig' ],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
},
|
|
|
|
# This tool is needed to rebuild .res files from .txt,
|
|
|
|
# or to build index (res_index.txt) files for small-icu
|
|
|
|
{
|
|
|
|
'target_name': 'genrb',
|
|
|
|
'type': 'executable',
|
|
|
|
'toolsets': [ 'host' ],
|
|
|
|
'dependencies': [ 'icutools' ],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
'sources': [
|
|
|
|
'<@(icu_src_genrb)'
|
|
|
|
],
|
|
|
|
# derb is a separate executable
|
|
|
|
# (which is not currently built)
|
|
|
|
'sources!': [
|
|
|
|
'<@(icu_src_derb)',
|
|
|
|
'no-op.cc',
|
|
|
|
],
|
|
|
|
},
|
|
|
|
# This tool is used to rebuild res_index.res manifests
|
|
|
|
{
|
|
|
|
'target_name': 'iculslocs',
|
|
|
|
'toolsets': [ 'host' ],
|
|
|
|
'type': 'executable',
|
|
|
|
'dependencies': [ 'icutools' ],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
'sources': [
|
|
|
|
'iculslocs.cc',
|
|
|
|
'no-op.cc',
|
|
|
|
],
|
|
|
|
},
|
|
|
|
# This tool is used to package, unpackage, repackage .dat files
|
|
|
|
# and convert endianesses
|
|
|
|
{
|
|
|
|
'target_name': 'icupkg',
|
|
|
|
'toolsets': [ 'host' ],
|
|
|
|
'type': 'executable',
|
|
|
|
'dependencies': [ 'icutools' ],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
'sources': [
|
|
|
|
'<@(icu_src_icupkg)',
|
|
|
|
'no-op.cc',
|
|
|
|
],
|
|
|
|
},
|
|
|
|
# this is used to convert .dat directly into .obj
|
|
|
|
{
|
|
|
|
'target_name': 'genccode',
|
|
|
|
'toolsets': [ 'host' ],
|
|
|
|
'type': 'executable',
|
|
|
|
'dependencies': [ 'icutools' ],
|
build, i18n: improve Intl build, add "--with-intl"
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
10 years ago
|
|
|
'sources': [
|
|
|
|
'<@(icu_src_genccode)',
|
|
|
|
'no-op.cc',
|
|
|
|
],
|
|
|
|
},
|
|
|
|
],
|
|
|
|
}
|