deps: upgrade openssl sources to 1.0.2k

This replaces all sources of openssl-1.0.2k.tar.gz into
deps/openssl/openssl

PR-URL: https://github.com/nodejs/node/pull/11021
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>

deps/openssl/openssl/CHANGES

@@ -2,6 +2,67 @@
  OpenSSL CHANGES
  _______________
 
+ Changes between 1.0.2j and 1.0.2k [26 Jan 2017]
+
+  *) Truncated packet could crash via OOB read
+
+     If one side of an SSL/TLS path is running on a 32-bit host and a specific
+     cipher is being used, then a truncated packet can cause that host to
+     perform an out-of-bounds read, usually resulting in a crash.
+
+     This issue was reported to OpenSSL by Robert Święcki of Google.
+     (CVE-2017-3731)
+     [Andy Polyakov]
+
+  *) BN_mod_exp may produce incorrect results on x86_64
+
+     There is a carry propagating bug in the x86_64 Montgomery squaring
+     procedure. No EC algorithms are affected. Analysis suggests that attacks
+     against RSA and DSA as a result of this defect would be very difficult to
+     perform and are not believed likely. Attacks against DH are considered just
+     feasible (although very difficult) because most of the work necessary to
+     deduce information about a private key may be performed offline. The amount
+     of resources required for such an attack would be very significant and
+     likely only accessible to a limited number of attackers. An attacker would
+     additionally need online access to an unpatched system using the target
+     private key in a scenario with persistent DH parameters and a private
+     key that is shared between multiple clients. For example this can occur by
+     default in OpenSSL DHE based SSL/TLS ciphersuites. Note: This issue is very
+     similar to CVE-2015-3193 but must be treated as a separate problem.
+
+     This issue was reported to OpenSSL by the OSS-Fuzz project.
+     (CVE-2017-3732)
+     [Andy Polyakov]
+
+  *) Montgomery multiplication may produce incorrect results
+
+     There is a carry propagating bug in the Broadwell-specific Montgomery
+     multiplication procedure that handles input lengths divisible by, but
+     longer than 256 bits. Analysis suggests that attacks against RSA, DSA
+     and DH private keys are impossible. This is because the subroutine in
+     question is not used in operations with the private key itself and an input
+     of the attacker's direct choice. Otherwise the bug can manifest itself as
+     transient authentication and key negotiation failures or reproducible
+     erroneous outcome of public-key operations with specially crafted input.
+     Among EC algorithms only Brainpool P-512 curves are affected and one
+     presumably can attack ECDH key negotiation. Impact was not analyzed in
+     detail, because pre-requisites for attack are considered unlikely. Namely
+     multiple clients have to choose the curve in question and the server has to
+     share the private key among them, neither of which is default behaviour.
+     Even then only clients that chose the curve will be affected.
+
+     This issue was publicly reported as transient failures and was not
+     initially recognized as a security issue. Thanks to Richard Morgan for
+     providing reproducible case.
+     (CVE-2016-7055)
+     [Andy Polyakov]
+
+  *) OpenSSL now fails if it receives an unrecognised record type in TLS1.0
+     or TLS1.1. Previously this only happened in SSLv3 and TLS1.2. This is to
+     prevent issues where no progress is being made and the peer continually
+     sends unrecognised record types, using up resources processing them.
+     [Matt Caswell]
+
  Changes between 1.0.2i and 1.0.2j [26 Sep 2016]
 
   *) Missing CRL sanity check

deps/openssl/openssl/CONTRIBUTING

@@ -1,4 +1,4 @@
-HOW TO CONTRIBUTE TO PATCHES OpenSSL
+HOW TO CONTRIBUTE PATCHES TO OpenSSL
 ------------------------------------
 
 (Please visit https://www.openssl.org/community/getting-started.html for
@@ -11,34 +11,12 @@ OpenSSL community you might want to discuss it on the openssl-dev mailing
 list first.  Someone may be already working on the same thing or there
 may be a good reason as to why that feature isn't implemented.
 
-The best way to submit a patch is to make a pull request on GitHub.
-(It is not necessary to send mail to rt@openssl.org to open a ticket!)
-If you think the patch could use feedback from the community, please
-start a thread on openssl-dev.
+To submit a patch, make a pull request on GitHub.  If you think the patch
+could use feedback from the community, please start a thread on openssl-dev
+to discuss it.
 
-You can also submit patches by sending it as mail to rt@openssl.org.
-Please include the word "PATCH" and an explanation of what the patch
-does in the subject line.  If you do this, our preferred format is "git
-format-patch" output. For example to provide a patch file containing the
-last commit in your local git repository use the following command:
-
-    % git format-patch --stdout HEAD^ >mydiffs.patch
-
-Another method of creating an acceptable patch file without using git is as
-follows:
-
-    % cd openssl-work
-    ...make your changes...
-    % ./Configure dist; make clean
-    % cd ..
-    % diff -ur openssl-orig openssl-work >mydiffs.patch
-
-Note that pull requests are generally easier for the team, and community, to
-work with.  Pull requests benefit from all of the standard GitHub features,
-including code review tools, simpler integration, and CI build support.
-
-No matter how a patch is submitted, the following items will help make
-the acceptance and review process faster:
+Having addressed the following items before the PR will help make the
+acceptance and review process faster:
 
     1. Anything other than trivial contributions will require a contributor
     licensing agreement, giving us permission to use your code. See
@@ -55,21 +33,22 @@ the acceptance and review process faster:
         in the file LICENSE in the source distribution or at
         https://www.openssl.org/source/license.html
 
-    3.  Patches should be as current as possible.  When using GitHub, please
-    expect to have to rebase and update often. Note that we do not accept merge
-    commits. You will be asked to remove them before a patch is considered
-    acceptable.
+    3.  Patches should be as current as possible; expect to have to rebase
+    often. We do not accept merge commits; You will be asked to remove
+    them before a patch is considered acceptable.
 
     4.  Patches should follow our coding style (see
     https://www.openssl.org/policies/codingstyle.html) and compile without
     warnings. Where gcc or clang is availble you should use the
     --strict-warnings Configure option.  OpenSSL compiles on many varied
     platforms: try to ensure you only use portable features.
+    Clean builds via Travis and AppVeyor are expected, and done whenever
+    a PR is created or updated.
 
-    5.  When at all possible, patches should include tests. These can either be
-    added to an existing test, or completely new.  Please see test/README
-    for information on the test framework.
+    5.  When at all possible, patches should include tests. These can
+    either be added to an existing test, or completely new.  Please see
+    test/README for information on the test framework.
 
-    6.  New features or changed functionality must include documentation. Please
-    look at the "pod" files in doc/apps, doc/crypto and doc/ssl for examples of
-    our style.
+    6.  New features or changed functionality must include
+    documentation. Please look at the "pod" files in doc/apps, doc/crypto
+    and doc/ssl for examples of our style.

deps/openssl/openssl/Configure

@@ -7,6 +7,7 @@ eval 'exec perl -S $0 ${1+"$@"}'
 
 require 5.000;
 use strict;
+use File::Compare;
 
 # see INSTALL for instructions.
 
@@ -57,12 +58,13 @@ my $usage="Usage: Configure [no-<cipher> ...] [enable-<cipher> ...] [experimenta
 # zlib-dynamic	Like "zlib", but the zlib library is expected to be a shared
 #		library and will be loaded in run-time by the OpenSSL library.
 # sctp          include SCTP support
-# 386           generate 80386 code
 # enable-weak-ssl-ciphers
 #		Enable EXPORT and LOW SSLv3 ciphers that are disabled by
 #		default.  Note, weak SSLv2 ciphers are unconditionally
 #		disabled.
-# no-sse2	disables IA-32 SSE2 code, above option implies no-sse2
+# 386		generate 80386 code in assembly modules
+# no-sse2	disables IA-32 SSE2 code in assembly modules, the above
+#		mentioned '386' option implies this one
 # no-<cipher>   build without specified algorithm (rsa, idea, rc5, ...)
 # -<xxx> +<xxx> compiler options are passed through 
 #
@@ -1792,8 +1794,16 @@ while (<IN>)
 	}
 close(IN);
 close(OUT);
-rename($Makefile,"$Makefile.bak") || die "unable to rename $Makefile\n" if -e $Makefile;
-rename("$Makefile.new",$Makefile) || die "unable to rename $Makefile.new\n";
+if ((compare($Makefile, "$Makefile.new"))
+	or file_newer('Configure', $Makefile)
+	or file_newer('config', $Makefile)
+	or file_newer('Makefile.org', $Makefile))
+	{
+	rename($Makefile,"$Makefile.bak") || die "unable to rename $Makefile\n" if -e $Makefile;
+	rename("$Makefile.new",$Makefile) || die "unable to rename $Makefile.new\n";
+	}
+else
+	{ unlink("$Makefile.new"); }
 
 print "CC            =$cc\n";
 print "CFLAG         =$cflags\n";
@@ -1985,9 +1995,13 @@ print OUT "#ifdef  __cplusplus\n";
 print OUT "}\n";
 print OUT "#endif\n";
 close(OUT);
-rename("crypto/opensslconf.h","crypto/opensslconf.h.bak") || die "unable to rename crypto/opensslconf.h\n" if -e "crypto/opensslconf.h";
-rename("crypto/opensslconf.h.new","crypto/opensslconf.h") || die "unable to rename crypto/opensslconf.h.new\n";
-
+if (compare("crypto/opensslconf.h.new","crypto/opensslconf.h"))
+	{
+	rename("crypto/opensslconf.h","crypto/opensslconf.h.bak") || die "unable to rename crypto/opensslconf.h\n" if -e "crypto/opensslconf.h";
+	rename("crypto/opensslconf.h.new","crypto/opensslconf.h") || die "unable to rename crypto/opensslconf.h.new\n";
+	}
+else
+	{ unlink("crypto/opensslconf.h.new"); }
 
 # Fix the date
 
@@ -2289,3 +2303,9 @@ sub test_sanity
 	print STDERR "No sanity errors detected!\n" if $errorcnt == 0;
 	return $errorcnt;
 	}
+
+sub file_newer
+	{
+	my ($file1, $file2) = @_;
+	return (stat($file1))[9] > (stat($file2))[9]
+	}

deps/openssl/openssl/INSTALL

@@ -74,24 +74,26 @@
 
   no-asm        Do not use assembler code.
 
-  386           Use the 80386 instruction set only (the default x86 code is
-                more efficient, but requires at least a 486). Note: Use
-                compiler flags for any other CPU specific configuration,
-                e.g. "-m32" to build x86 code on an x64 system.
-
-  no-sse2	Exclude SSE2 code pathes. Normally SSE2 extention is
-		detected at run-time, but the decision whether or not the
-		machine code will be executed is taken solely on CPU
-		capability vector. This means that if you happen to run OS
-		kernel which does not support SSE2 extension on Intel P4
-		processor, then your application might be exposed to
-		"illegal instruction" exception. There might be a way
-		to enable support in kernel, e.g. FreeBSD kernel can be
-		compiled with CPU_ENABLE_SSE, and there is a way to
-		disengage SSE2 code pathes upon application start-up,
-		but if you aim for wider "audience" running such kernel,
-		consider no-sse2. Both 386 and no-asm options above imply
-		no-sse2.
+  386           In 32-bit x86 builds, when generating assembly modules,
+                use the 80386 instruction set only (the default x86 code
+                is more efficient, but requires at least a 486). Note:
+                This doesn't affect code generated by compiler, you're
+                likely to complement configuration command line with
+                suitable compiler-specific option.
+
+  no-sse2       Exclude SSE2 code paths from 32-bit x86 assembly modules.
+                Normally SSE2 extension is detected at run-time, but the
+                decision whether or not the machine code will be executed
+                is taken solely on CPU capability vector. This means that
+                if you happen to run OS kernel which does not support SSE2
+                extension on Intel P4 processor, then your application
+                might be exposed to "illegal instruction" exception.
+                There might be a way to enable support in kernel, e.g.
+                FreeBSD kernel can  be compiled with CPU_ENABLE_SSE, and
+                there is a way to disengage SSE2 code paths upon application
+                start-up, but if you aim for wider "audience" running
+                such kernel, consider no-sse2. Both the 386 and
+                no-asm options imply no-sse2.
 
   no-<cipher>   Build without the specified cipher (bf, cast, des, dh, dsa,
                 hmac, md2, md5, mdc2, rc2, rc4, rc5, rsa, sha).
@@ -101,7 +103,12 @@
   -Dxxx, -lxxx, -Lxxx, -fxxx, -mXXX, -Kxxx These system specific options will
                 be passed through to the compiler to allow you to
                 define preprocessor symbols, specify additional libraries,
-                library directories or other compiler options.
+                library directories or other compiler options. It might be
+                worth noting that some compilers generate code specifically
+                for processor the compiler currently executes on. This is
+                not necessarily what you might have in mind, since it might
+                be unsuitable for execution on other, typically older,
+                processor. Consult your compiler documentation.
 
   -DHAVE_CRYPTODEV Enable the BSD cryptodev engine even if we are not using
 		BSD. Useful if you are running ocf-linux or something
@@ -159,18 +166,18 @@
      OpenSSL binary ("openssl"). The libraries will be built in the top-level
      directory, and the binary will be in the "apps" directory.
 
-     If "make" fails, look at the output.  There may be reasons for
-     the failure that aren't problems in OpenSSL itself (like missing
-     standard headers).  If it is a problem with OpenSSL itself, please
-     report the problem to <openssl-bugs@openssl.org> (note that your
-     message will be recorded in the request tracker publicly readable
-     at https://www.openssl.org/community/index.html#bugs and will be
-     forwarded to a public mailing list). Include the output of "make
-     report" in your message.  Please check out the request tracker. Maybe
-     the bug was already reported or has already been fixed.
-
-     [If you encounter assembler error messages, try the "no-asm"
-     configuration option as an immediate fix.]
+     If the build fails, look at the output.  There may be reasons
+     for the failure that aren't problems in OpenSSL itself (like
+     missing standard headers).  If you are having problems you can
+     get help by sending an email to the openssl-users email list (see
+     https://www.openssl.org/community/mailinglists.html for details). If
+     it is a bug with OpenSSL itself, please open an issue on GitHub, at
+     https://github.com/openssl/openssl/issues. Please review the existing
+     ones first; maybe the bug was already reported or has already been
+     fixed.
+
+     (If you encounter assembler error messages, try the "no-asm"
+     configuration option as an immediate fix.)
 
      Compiling parts of OpenSSL with gcc and others with the system
      compiler will result in unresolved symbols on some systems.

deps/openssl/openssl/Makefile

@@ -4,7 +4,7 @@
 ## Makefile for OpenSSL
 ##
 
-VERSION=1.0.2j
+VERSION=1.0.2k
 MAJOR=1
 MINOR=0.2
 SHLIB_VERSION_NUMBER=1.0.0
@@ -203,7 +203,8 @@ CLEARENV=	TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}	\
 		$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS}		\
 		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS}	\
 		$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}	\
-		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
+		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}	\
+		$${APPS+APPS}
 
 # LC_ALL=C ensures that error [and other] messages are delivered in
 # same language for uniform treatment.

deps/openssl/openssl/Makefile.bak

@@ -4,7 +4,7 @@
 ## Makefile for OpenSSL
 ##
 
-VERSION=1.0.2j
+VERSION=1.0.2k
 MAJOR=1
 MINOR=0.2
 SHLIB_VERSION_NUMBER=1.0.0
@@ -203,7 +203,8 @@ CLEARENV=	TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}	\
 		$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS}		\
 		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS}	\
 		$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}	\
-		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
+		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}	\
+		$${APPS+APPS}
 
 # LC_ALL=C ensures that error [and other] messages are delivered in
 # same language for uniform treatment.

deps/openssl/openssl/Makefile.org

@@ -201,7 +201,8 @@ CLEARENV=	TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}	\
 		$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS}		\
 		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS}	\
 		$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}	\
-		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
+		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}	\
+		$${APPS+APPS}
 
 # LC_ALL=C ensures that error [and other] messages are delivered in
 # same language for uniform treatment.

deps/openssl/openssl/NEWS

@@ -5,9 +5,15 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
+  Major changes between OpenSSL 1.0.2j and OpenSSL 1.0.2k [26 Jan 2017]
+
+      o Truncated packet could crash via OOB read (CVE-2017-3731)
+      o BN_mod_exp may produce incorrect results on x86_64 (CVE-2017-3732)
+      o Montgomery multiplication may produce incorrect results (CVE-2016-7055)
+
   Major changes between OpenSSL 1.0.2i and OpenSSL 1.0.2j [26 Sep 2016]
 
-      o Fix Use After Free for large message sizes (CVE-2016-6309)
+      o Missing CRL sanity check (CVE-2016-7052)
 
   Major changes between OpenSSL 1.0.2h and OpenSSL 1.0.2i [22 Sep 2016]
 

deps/openssl/openssl/README

@@ -1,5 +1,5 @@
 
- OpenSSL 1.0.2j 26 Sep 2016
+ OpenSSL 1.0.2k 26 Jan 2017
 
  Copyright (c) 1998-2015 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
@@ -66,13 +66,13 @@
  If you have any problems with OpenSSL then please take the following steps
  first:
 
-    - Download the current snapshot from ftp://ftp.openssl.org/snapshot/
+    - Download the latest version from the repository
       to see if the problem has already been addressed
-    - Remove ASM versions of libraries
+    - Configure with no-asm
     - Remove compiler optimisation flags
 
- If you wish to report a bug then please include the following information in
- any bug report:
+ If you wish to report a bug then please include the following information
+ and create an issue on GitHub:
 
     - On Unix systems:
         Self-test report generated by 'make report'
@@ -84,27 +84,9 @@
     - Problem Description (steps that will reproduce the problem, if known)
     - Stack Traceback (if the application dumps core)
 
- Email the report to:
-
-    rt@openssl.org
-
- In order to avoid spam, this is a moderated mailing list, and it might
- take a day for the ticket to show up.  (We also scan posts to make sure
- that security disclosures aren't publically posted by mistake.) Mail
- to this address is recorded in the public RT (request tracker) database
- (see https://www.openssl.org/community/index.html#bugs for details) and
- also forwarded the public openssl-dev mailing list.  Confidential mail
- may be sent to openssl-security@openssl.org (PGP key available from the
- key servers).
-
- Please do NOT use this for general assistance or support queries.
  Just because something doesn't work the way you expect does not mean it
  is necessarily a bug in OpenSSL.
 
- You can also make GitHub pull requests. If you do this, please also send
- mail to rt@openssl.org with a link to the PR so that we can more easily
- keep track of it.
-
  HOW TO CONTRIBUTE TO OpenSSL
  ----------------------------
 
@@ -113,7 +95,7 @@
  LEGALITIES
  ----------
 
- A number of nations, in particular the U.S., restrict the use or export
- of cryptography. If you are potentially subject to such restrictions
- you should seek competent professional legal advice before attempting to
- develop or distribute cryptographic code.
+ A number of nations restrict the use or export of cryptography. If you
+ are potentially subject to such restrictions you should seek competent
+ professional legal advice before attempting to develop or distribute
+ cryptographic code.

deps/openssl/openssl/apps/app_rand.c

@@ -124,16 +124,7 @@ int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn)
     char buffer[200];
 
 #ifdef OPENSSL_SYS_WINDOWS
-    /*
-     * allocate 2 to dont_warn not to use RAND_screen() via
-     * -no_rand_screen option in s_client
-     */
-    if (dont_warn != 2) {
-      BIO_printf(bio_e, "Loading 'screen' into random state -");
-      BIO_flush(bio_e);
     RAND_screen();
-      BIO_printf(bio_e, " done\n");
-    }
 #endif
 
     if (file == NULL)

deps/openssl/openssl/apps/apps.c

@@ -972,7 +972,10 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
         if (!e)
             BIO_printf(err, "no engine specified\n");
         else {
+            if (ENGINE_init(e)) {
                 pkey = ENGINE_load_private_key(e, file, ui_method, &cb_data);
+                ENGINE_finish(e);
+            }
             if (!pkey) {
                 BIO_printf(err, "cannot load %s from engine\n", key_descrip);
                 ERR_print_errors(err);
@@ -1532,11 +1535,13 @@ static ENGINE *try_load_engine(BIO *err, const char *engine, int debug)
     }
     return e;
 }
+#endif
 
 ENGINE *setup_engine(BIO *err, const char *engine, int debug)
 {
     ENGINE *e = NULL;
 
+#ifndef OPENSSL_NO_ENGINE
     if (engine) {
         if (strcmp(engine, "auto") == 0) {
             BIO_printf(err, "enabling auto ENGINE support\n");
@@ -1561,13 +1566,19 @@ ENGINE *setup_engine(BIO *err, const char *engine, int debug)
         }
 
         BIO_printf(err, "engine \"%s\" set.\n", ENGINE_get_id(e));
-
-        /* Free our "structural" reference. */
-        ENGINE_free(e);
     }
+#endif
     return e;
 }
+
+void release_engine(ENGINE *e)
+{
+#ifndef OPENSSL_NO_ENGINE
+    if (e != NULL)
+        /* Free our "structural" reference. */
+        ENGINE_free(e);
 #endif
+}
 
 int load_config(BIO *err, CONF *cnf)
 {

deps/openssl/openssl/apps/apps.h

@@ -259,9 +259,9 @@ STACK_OF(X509_CRL) *load_crls(BIO *err, const char *file, int format,
                               const char *pass, ENGINE *e,
                               const char *cert_descrip);
 X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath);
-# ifndef OPENSSL_NO_ENGINE
+
 ENGINE *setup_engine(BIO *err, const char *engine, int debug);
-# endif
+void release_engine(ENGINE *e);
 
 # ifndef OPENSSL_NO_OCSP
 OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req,

deps/openssl/openssl/apps/ca.c

@@ -319,9 +319,7 @@ int MAIN(int argc, char **argv)
 #define BSIZE 256
     MS_STATIC char buf[3][BSIZE];
     char *randfile = NULL;
-#ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-#endif
     char *tofree = NULL;
     DB_ATTR db_attr;
 
@@ -595,9 +593,7 @@ int MAIN(int argc, char **argv)
     if (!load_config(bio_err, conf))
         goto err;
 
-#ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine, 0);
-#endif
 
     /* Lets get the config section we are using */
     if (section == NULL) {
@@ -1485,6 +1481,7 @@ int MAIN(int argc, char **argv)
     X509_CRL_free(crl);
     NCONF_free(conf);
     NCONF_free(extconf);
+    release_engine(e);
     OBJ_cleanup();
     apps_shutdown();
     OPENSSL_EXIT(ret);
@@ -2227,7 +2224,6 @@ static int certify_spkac(X509 **xret, char *infile, EVP_PKEY *pkey,
     sk = CONF_get_section(parms, "default");
     if (sk_CONF_VALUE_num(sk) == 0) {
         BIO_printf(bio_err, "no name/value pairs found in %s\n", infile);
-        CONF_free(parms);
         goto err;
     }
 

deps/openssl/openssl/apps/cms.c

@@ -143,9 +143,7 @@ int MAIN(int argc, char **argv)
     const EVP_MD *sign_md = NULL;
     int informat = FORMAT_SMIME, outformat = FORMAT_SMIME;
     int rctformat = FORMAT_SMIME, keyform = FORMAT_PEM;
-# ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-# endif
     unsigned char *secret_key = NULL, *secret_keyid = NULL;
     unsigned char *pwri_pass = NULL, *pwri_tmp = NULL;
     size_t secret_keylen = 0, secret_keyidlen = 0;
@@ -665,9 +663,7 @@ int MAIN(int argc, char **argv)
                    "cert.pem       recipient certificate(s) for encryption\n");
         goto end;
     }
-# ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine, 0);
-# endif
 
     if (!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
         BIO_printf(bio_err, "Error getting password\n");
@@ -1170,6 +1166,7 @@ int MAIN(int argc, char **argv)
     EVP_PKEY_free(key);
     CMS_ContentInfo_free(cms);
     CMS_ContentInfo_free(rcms);
+    release_engine(e);
     BIO_free(rctin);
     BIO_free(in);
     BIO_free(indata);

deps/openssl/openssl/apps/dgst.c

@@ -537,6 +537,7 @@ int MAIN(int argc, char **argv)
         OPENSSL_free(sigbuf);
     if (bmd != NULL)
         BIO_free(bmd);
+    release_engine(e);
     apps_shutdown();
     OPENSSL_EXIT(err);
 }

deps/openssl/openssl/apps/dh.c

@@ -94,9 +94,7 @@ int MAIN(int argc, char **argv)
     BIO *in = NULL, *out = NULL;
     int informat, outformat, check = 0, noout = 0, C = 0, ret = 1;
     char *infile, *outfile, *prog;
-# ifndef OPENSSL_NO_ENGINE
     char *engine;
-# endif
 
     apps_startup();
 
@@ -107,9 +105,7 @@ int MAIN(int argc, char **argv)
     if (!load_config(bio_err, NULL))
         goto end;
 
-# ifndef OPENSSL_NO_ENGINE
     engine = NULL;
-# endif
     infile = NULL;
     outfile = NULL;
     informat = FORMAT_PEM;
@@ -183,9 +179,7 @@ int MAIN(int argc, char **argv)
 
     ERR_load_crypto_strings();
 
-# ifndef OPENSSL_NO_ENGINE
     setup_engine(bio_err, engine, 0);
-# endif
 
     in = BIO_new(BIO_s_file());
     out = BIO_new(BIO_s_file());

deps/openssl/openssl/apps/dhparam.c

@@ -159,9 +159,8 @@ int MAIN(int argc, char **argv)
     int informat, outformat, check = 0, noout = 0, C = 0, ret = 1;
     char *infile, *outfile, *prog;
     char *inrand = NULL;
-# ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-# endif
+    ENGINE *e = NULL;
     int num = 0, g = 0;
 
     apps_startup();
@@ -270,9 +269,7 @@ int MAIN(int argc, char **argv)
 
     ERR_load_crypto_strings();
 
-# ifndef OPENSSL_NO_ENGINE
-    setup_engine(bio_err, engine, 0);
-# endif
+    e = setup_engine(bio_err, engine, 0);
 
     if (g && !num)
         num = DEFBITS;
@@ -512,6 +509,7 @@ int MAIN(int argc, char **argv)
         BIO_free_all(out);
     if (dh != NULL)
         DH_free(dh);
+    release_engine(e);
     apps_shutdown();
     OPENSSL_EXIT(ret);
 }

deps/openssl/openssl/apps/dsa.c

@@ -106,9 +106,7 @@ int MAIN(int argc, char **argv)
     int informat, outformat, text = 0, noout = 0;
     int pubin = 0, pubout = 0;
     char *infile, *outfile, *prog;
-# ifndef OPENSSL_NO_ENGINE
     char *engine;
-# endif
     char *passargin = NULL, *passargout = NULL;
     char *passin = NULL, *passout = NULL;
     int modulus = 0;
@@ -124,9 +122,7 @@ int MAIN(int argc, char **argv)
     if (!load_config(bio_err, NULL))
         goto end;
 
-# ifndef OPENSSL_NO_ENGINE
     engine = NULL;
-# endif
     infile = NULL;
     outfile = NULL;
     informat = FORMAT_PEM;
@@ -239,9 +235,7 @@ int MAIN(int argc, char **argv)
 
     ERR_load_crypto_strings();
 
-# ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine, 0);
-# endif
 
     if (!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
         BIO_printf(bio_err, "Error getting passwords\n");
@@ -358,6 +352,7 @@ int MAIN(int argc, char **argv)
         BIO_free_all(out);
     if (dsa != NULL)
         DSA_free(dsa);
+    release_engine(e);
     if (passin)
         OPENSSL_free(passin);
     if (passout)

deps/openssl/openssl/apps/dsaparam.c

@@ -121,9 +121,8 @@ int MAIN(int argc, char **argv)
     char *infile, *outfile, *prog, *inrand = NULL;
     int numbits = -1, num, genkey = 0;
     int need_rand = 0;
-# ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-# endif
+    ENGINE *e = NULL;
 # ifdef GENCB_TEST
     int timebomb = 0;
 # endif
@@ -263,9 +262,7 @@ int MAIN(int argc, char **argv)
         }
     }
 
-# ifndef OPENSSL_NO_ENGINE
-    setup_engine(bio_err, engine, 0);
-# endif
+    e = setup_engine(bio_err, engine, 0);
 
     if (need_rand) {
         app_RAND_load_file(NULL, bio_err, (inrand != NULL));
@@ -433,6 +430,7 @@ int MAIN(int argc, char **argv)
         BIO_free_all(out);
     if (dsa != NULL)
         DSA_free(dsa);
+    release_engine(e);
     apps_shutdown();
     OPENSSL_EXIT(ret);
 }

deps/openssl/openssl/apps/ec.c

@@ -95,6 +95,7 @@ int MAIN(int argc, char **argv)
     int informat, outformat, text = 0, noout = 0;
     int pubin = 0, pubout = 0, param_out = 0;
     char *infile, *outfile, *prog, *engine;
+    ENGINE *e = NULL;
     char *passargin = NULL, *passargout = NULL;
     char *passin = NULL, *passout = NULL;
     point_conversion_form_t form = POINT_CONVERSION_UNCOMPRESSED;
@@ -235,9 +236,7 @@ int MAIN(int argc, char **argv)
 
     ERR_load_crypto_strings();
 
-# ifndef OPENSSL_NO_ENGINE
-    setup_engine(bio_err, engine, 0);
-# endif
+    e = setup_engine(bio_err, engine, 0);
 
     if (!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
         BIO_printf(bio_err, "Error getting passwords\n");
@@ -349,6 +348,7 @@ int MAIN(int argc, char **argv)
         BIO_free_all(out);
     if (eckey)
         EC_KEY_free(eckey);
+    release_engine(e);
     if (passin)
         OPENSSL_free(passin);
     if (passout)

deps/openssl/openssl/apps/ecparam.c

@@ -131,6 +131,7 @@ int MAIN(int argc, char **argv)
     BIO *in = NULL, *out = NULL;
     int informat, outformat, noout = 0, C = 0, ret = 1;
     char *engine = NULL;
+    ENGINE *e = NULL;
 
     BIGNUM *ec_p = NULL, *ec_a = NULL, *ec_b = NULL,
         *ec_gen = NULL, *ec_order = NULL, *ec_cofactor = NULL;
@@ -311,9 +312,7 @@ int MAIN(int argc, char **argv)
         }
     }
 
-# ifndef OPENSSL_NO_ENGINE
-    setup_engine(bio_err, engine, 0);
-# endif
+    e = setup_engine(bio_err, engine, 0);
 
     if (list_curves) {
         EC_builtin_curve *curves = NULL;
@@ -620,12 +619,13 @@ int MAIN(int argc, char **argv)
         BN_free(ec_cofactor);
     if (buffer)
         OPENSSL_free(buffer);
+    if (group != NULL)
+        EC_GROUP_free(group);
+    release_engine(e);
     if (in != NULL)
         BIO_free(in);
     if (out != NULL)
         BIO_free_all(out);
-    if (group != NULL)
-        EC_GROUP_free(group);
     apps_shutdown();
     OPENSSL_EXIT(ret);
 }

deps/openssl/openssl/apps/enc.c

@@ -126,9 +126,8 @@ int MAIN(int argc, char **argv)
         NULL, *wbio = NULL;
 #define PROG_NAME_SIZE  39
     char pname[PROG_NAME_SIZE + 1];
-#ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-#endif
+    ENGINE *e = NULL;
     const EVP_MD *dgst = NULL;
     int non_fips_allow = 0;
 
@@ -322,9 +321,7 @@ int MAIN(int argc, char **argv)
         argv++;
     }
 
-#ifndef OPENSSL_NO_ENGINE
-    setup_engine(bio_err, engine, 0);
-#endif
+    e = setup_engine(bio_err, engine, 0);
 
     if (cipher && EVP_CIPHER_flags(cipher) & EVP_CIPH_FLAG_AEAD_CIPHER) {
         BIO_printf(bio_err,
@@ -674,6 +671,7 @@ int MAIN(int argc, char **argv)
     if (bzl != NULL)
         BIO_free(bzl);
 #endif
+    release_engine(e);
     if (pass)
         OPENSSL_free(pass);
     apps_shutdown();

deps/openssl/openssl/apps/gendh.c

@@ -96,9 +96,7 @@ int MAIN(int argc, char **argv)
     int g = 2;
     char *outfile = NULL;
     char *inrand = NULL;
-# ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-# endif
     BIO *out = NULL;
 
     apps_startup();
@@ -162,9 +160,7 @@ int MAIN(int argc, char **argv)
         BIO_printf(bio_err, "             the random number generator\n");
         goto end;
     }
-# ifndef OPENSSL_NO_ENGINE
     setup_engine(bio_err, engine, 0);
-# endif
 
     out = BIO_new(BIO_s_file());
     if (out == NULL) {

deps/openssl/openssl/apps/gendsa.c

@@ -85,9 +85,8 @@ int MAIN(int argc, char **argv)
     char *passargout = NULL, *passout = NULL;
     BIO *out = NULL, *in = NULL;
     const EVP_CIPHER *enc = NULL;
-# ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-# endif
+    ENGINE *e = NULL;
 
     apps_startup();
 
@@ -206,9 +205,7 @@ int MAIN(int argc, char **argv)
                    "           - a DSA parameter file as generated by the dsaparam command\n");
         goto end;
     }
-# ifndef OPENSSL_NO_ENGINE
-    setup_engine(bio_err, engine, 0);
-# endif
+    e = setup_engine(bio_err, engine, 0);
 
     if (!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
         BIO_printf(bio_err, "Error getting password\n");
@@ -273,6 +270,7 @@ int MAIN(int argc, char **argv)
         BIO_free_all(out);
     if (dsa != NULL)
         DSA_free(dsa);
+    release_engine(e);
     if (passout)
         OPENSSL_free(passout);
     apps_shutdown();

deps/openssl/openssl/apps/genpkey.c

@@ -275,9 +275,9 @@ int MAIN(int argc, char **argv)
     if (out)
         BIO_free_all(out);
     BIO_free(in);
+    release_engine(e);
     if (pass)
         OPENSSL_free(pass);
-
     return ret;
 }
 

deps/openssl/openssl/apps/genrsa.c

@@ -91,9 +91,7 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 {
     BN_GENCB cb;
-# ifndef OPENSSL_NO_ENGINE
     ENGINE *e = NULL;
-# endif
     int ret = 1;
     int i, num = DEFBITS;
     long l;
@@ -101,9 +99,7 @@ int MAIN(int argc, char **argv)
     unsigned long f4 = RSA_F4;
     char *outfile = NULL;
     char *passargout = NULL, *passout = NULL;
-# ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-# endif
     char *inrand = NULL;
     BIO *out = NULL;
     BIGNUM *bn = BN_new();
@@ -240,9 +236,7 @@ int MAIN(int argc, char **argv)
         BIO_printf(bio_err, "Error getting password\n");
         goto err;
     }
-# ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine, 0);
-# endif
 
     if (outfile == NULL) {
         BIO_set_fp(out, stdout, BIO_NOCLOSE);
@@ -314,6 +308,7 @@ int MAIN(int argc, char **argv)
         RSA_free(rsa);
     if (out)
         BIO_free_all(out);
+    release_engine(e);
     if (passout)
         OPENSSL_free(passout);
     if (ret != 0)

deps/openssl/openssl/apps/pkcs12.c

@@ -129,9 +129,7 @@ int MAIN(int argc, char **argv)
     char *inrand = NULL;
     char *macalg = NULL;
     char *CApath = NULL, *CAfile = NULL;
-# ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-# endif
 
     apps_startup();
 
@@ -406,9 +404,7 @@ int MAIN(int argc, char **argv)
                    "-LMK          Add local machine keyset attribute to private key\n");
         goto end;
     }
-# ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine, 0);
-# endif
 
     if (passarg) {
         if (export_cert)
@@ -756,6 +752,7 @@ int MAIN(int argc, char **argv)
 # ifdef CRYPTO_MDEBUG
     CRYPTO_remove_all_info();
 # endif
+    release_engine(e);
     BIO_free(in);
     BIO_free_all(out);
     if (canames)
@@ -1110,4 +1107,6 @@ static int set_pbe(BIO *err, int *ppbe, const char *str)
     return 1;
 }
 
+#else
+static void *dummy = &dummy;
 #endif

deps/openssl/openssl/apps/pkcs7.c

@@ -90,9 +90,8 @@ int MAIN(int argc, char **argv)
     char *infile, *outfile, *prog;
     int print_certs = 0, text = 0, noout = 0, p7_print = 0;
     int ret = 1;
-#ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-#endif
+    ENGINE *e = NULL;
 
     apps_startup();
 
@@ -175,9 +174,7 @@ int MAIN(int argc, char **argv)
 
     ERR_load_crypto_strings();
 
-#ifndef OPENSSL_NO_ENGINE
-    setup_engine(bio_err, engine, 0);
-#endif
+    e = setup_engine(bio_err, engine, 0);
 
     in = BIO_new(BIO_s_file());
     out = BIO_new(BIO_s_file());
@@ -303,6 +300,7 @@ int MAIN(int argc, char **argv)
  end:
     if (p7 != NULL)
         PKCS7_free(p7);
+    release_engine(e);
     if (in != NULL)
         BIO_free(in);
     if (out != NULL)

deps/openssl/openssl/apps/pkcs8.c

@@ -87,9 +87,7 @@ int MAIN(int argc, char **argv)
     char pass[50], *passin = NULL, *passout = NULL, *p8pass = NULL;
     int badarg = 0;
     int ret = 1;
-#ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-#endif
 
     if (bio_err == NULL)
         bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
@@ -223,9 +221,7 @@ int MAIN(int argc, char **argv)
 #endif
         goto end;
     }
-#ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine, 0);
-#endif
 
     if (!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
         BIO_printf(bio_err, "Error getting passwords\n");
@@ -391,6 +387,7 @@ int MAIN(int argc, char **argv)
     X509_SIG_free(p8);
     PKCS8_PRIV_KEY_INFO_free(p8inf);
     EVP_PKEY_free(pkey);
+    release_engine(e);
     BIO_free_all(out);
     BIO_free(in);
     if (passin)

deps/openssl/openssl/apps/pkey.c

@@ -79,9 +79,7 @@ int MAIN(int argc, char **argv)
     EVP_PKEY *pkey = NULL;
     char *passin = NULL, *passout = NULL;
     int badarg = 0;
-#ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-#endif
     int ret = 1;
 
     if (bio_err == NULL)
@@ -178,9 +176,7 @@ int MAIN(int argc, char **argv)
 #endif
         return 1;
     }
-#ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine, 0);
-#endif
 
     if (!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
         BIO_printf(bio_err, "Error getting passwords\n");
@@ -240,6 +236,7 @@ int MAIN(int argc, char **argv)
 
  end:
     EVP_PKEY_free(pkey);
+    release_engine(e);
     BIO_free_all(out);
     BIO_free(in);
     if (passin)

deps/openssl/openssl/apps/pkeyparam.c

@@ -74,9 +74,8 @@ int MAIN(int argc, char **argv)
     int text = 0, noout = 0;
     EVP_PKEY *pkey = NULL;
     int badarg = 0;
-#ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-#endif
+    ENGINE *e = NULL;
     int ret = 1;
 
     if (bio_err == NULL)
@@ -134,9 +133,7 @@ int MAIN(int argc, char **argv)
 #endif
         return 1;
     }
-#ifndef OPENSSL_NO_ENGINE
-    setup_engine(bio_err, engine, 0);
-#endif
+    e = setup_engine(bio_err, engine, 0);
 
     if (infile) {
         if (!(in = BIO_new_file(infile, "r"))) {
@@ -178,6 +175,7 @@ int MAIN(int argc, char **argv)
 
  end:
     EVP_PKEY_free(pkey);
+    release_engine(e);
     BIO_free_all(out);
     BIO_free(in);
 

deps/openssl/openssl/apps/pkeyutl.c

@@ -357,6 +357,7 @@ int MAIN(int argc, char **argv)
  end:
     if (ctx)
         EVP_PKEY_CTX_free(ctx);
+    release_engine(e);
     BIO_free(in);
     BIO_free_all(out);
     if (buf_in != NULL)

deps/openssl/openssl/apps/prime.c

@@ -128,16 +128,24 @@ int MAIN(int argc, char **argv)
         BIO_printf(bio_out, "%s\n", s);
         OPENSSL_free(s);
     } else {
+        int r;
+
         if (hex)
-            BN_hex2bn(&bn, argv[0]);
+            r = BN_hex2bn(&bn, argv[0]);
         else
-            BN_dec2bn(&bn, argv[0]);
+            r = BN_dec2bn(&bn, argv[0]);
+
+        if(!r) {
+            BIO_printf(bio_err, "Failed to process value (%s)\n", argv[0]);
+            goto end;
+        }
 
         BN_print(bio_out, bn);
         BIO_printf(bio_out, " is %sprime\n",
                    BN_is_prime_ex(bn, checks, NULL, NULL) ? "" : "not ");
     }
 
+ end:
     BN_free(bn);
     BIO_free_all(bio_out);
 

deps/openssl/openssl/apps/rand.c

@@ -86,9 +86,8 @@ int MAIN(int argc, char **argv)
     int hex = 0;
     BIO *out = NULL;
     int num = -1;
-#ifndef OPENSSL_NO_ENGINE
+    ENGINE *e = NULL;
     char *engine = NULL;
-#endif
 
     apps_startup();
 
@@ -162,9 +161,7 @@ int MAIN(int argc, char **argv)
         BIO_printf(bio_err, "-hex                  - hex encode output\n");
         goto err;
     }
-#ifndef OPENSSL_NO_ENGINE
-    setup_engine(bio_err, engine, 0);
-#endif
+    e = setup_engine(bio_err, engine, 0);
 
     app_RAND_load_file(NULL, bio_err, (inrand != NULL));
     if (inrand != NULL)
@@ -222,6 +219,7 @@ int MAIN(int argc, char **argv)
 
  err:
     ERR_print_errors(bio_err);
+    release_engine(e);
     if (out)
         BIO_free_all(out);
     apps_shutdown();

deps/openssl/openssl/apps/req.c

@@ -179,9 +179,7 @@ int MAIN(int argc, char **argv)
     int nodes = 0, kludge = 0, newhdr = 0, subject = 0, pubkey = 0;
     char *infile, *outfile, *prog, *keyfile = NULL, *template =
         NULL, *keyout = NULL;
-#ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-#endif
     char *extensions = NULL;
     char *req_exts = NULL;
     const EVP_CIPHER *cipher = NULL;
@@ -595,9 +593,7 @@ int MAIN(int argc, char **argv)
     if ((in == NULL) || (out == NULL))
         goto end;
 
-#ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine, 0);
-#endif
 
     if (keyfile != NULL) {
         pkey = load_key(bio_err, keyfile, keyform, 0, passin, e,
@@ -1040,6 +1036,7 @@ int MAIN(int argc, char **argv)
     X509_REQ_free(req);
     X509_free(x509ss);
     ASN1_INTEGER_free(serial);
+    release_engine(e);
     if (passargin && passin)
         OPENSSL_free(passin);
     if (passargout && passout)

deps/openssl/openssl/apps/rsa.c

@@ -111,9 +111,7 @@ int MAIN(int argc, char **argv)
     char *infile, *outfile, *prog;
     char *passargin = NULL, *passargout = NULL;
     char *passin = NULL, *passout = NULL;
-# ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-# endif
     int modulus = 0;
 
     int pvk_encr = 2;
@@ -254,9 +252,7 @@ int MAIN(int argc, char **argv)
 
     ERR_load_crypto_strings();
 
-# ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine, 0);
-# endif
 
     if (!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
         BIO_printf(bio_err, "Error getting passwords\n");
@@ -419,6 +415,7 @@ int MAIN(int argc, char **argv)
     } else
         ret = 0;
  end:
+    release_engine(e);
     if (out != NULL)
         BIO_free_all(out);
     if (rsa != NULL)

deps/openssl/openssl/apps/rsautl.c

@@ -88,9 +88,7 @@ int MAIN(int argc, char **argv)
     ENGINE *e = NULL;
     BIO *in = NULL, *out = NULL;
     char *infile = NULL, *outfile = NULL;
-# ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-# endif
     char *keyfile = NULL;
     char rsa_mode = RSA_VERIFY, key_type = KEY_PRIVKEY;
     int keyform = FORMAT_PEM;
@@ -195,9 +193,7 @@ int MAIN(int argc, char **argv)
         BIO_printf(bio_err, "A private key is needed for this operation\n");
         goto end;
     }
-# ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine, 0);
-# endif
     if (!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
         BIO_printf(bio_err, "Error getting password\n");
         goto end;
@@ -327,6 +323,7 @@ int MAIN(int argc, char **argv)
         BIO_write(out, rsa_out, rsa_outlen);
  end:
     RSA_free(rsa);
+    release_engine(e);
     BIO_free(in);
     BIO_free_all(out);
     if (rsa_in)

deps/openssl/openssl/apps/s_cb.c

@@ -548,12 +548,12 @@ long MS_CALLBACK bio_dump_callback(BIO *bio, int cmd, const char *argp,
 
     if (cmd == (BIO_CB_READ | BIO_CB_RETURN)) {
         BIO_printf(out, "read from %p [%p] (%lu bytes => %ld (0x%lX))\n",
-                   (void *)bio, argp, (unsigned long)argi, ret, ret);
+                   (void *)bio, (void *)argp, (unsigned long)argi, ret, ret);
         BIO_dump(out, argp, (int)ret);
         return (ret);
     } else if (cmd == (BIO_CB_WRITE | BIO_CB_RETURN)) {
         BIO_printf(out, "write to %p [%p] (%lu bytes => %ld (0x%lX))\n",
-                   (void *)bio, argp, (unsigned long)argi, ret, ret);
+                   (void *)bio, (void *)argp, (unsigned long)argi, ret, ret);
         BIO_dump(out, argp, (int)ret);
     }
     return (ret);

deps/openssl/openssl/apps/s_client.c

@@ -180,13 +180,6 @@ typedef unsigned int u_int;
 # include <fcntl.h>
 #endif
 
-/* Use Windows API with STD_INPUT_HANDLE when checking for input?
-   Don't look at OPENSSL_SYS_MSDOS for this, since it is always defined if
-   OPENSSL_SYS_WINDOWS is defined */
-#if defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_WINCE) && defined(STD_INPUT_HANDLE)
-#define OPENSSL_USE_STD_INPUT_HANDLE
-#endif
-
 #undef PROG
 #define PROG    s_client_main
 
@@ -236,7 +229,6 @@ static BIO *bio_c_msg = NULL;
 static int c_quiet = 0;
 static int c_ign_eof = 0;
 static int c_brief = 0;
-static int c_no_rand_screen = 0;
 
 #ifndef OPENSSL_NO_PSK
 /* Default PSK identity and key */
@@ -452,10 +444,6 @@ static void sc_usage(void)
                " -keymatexport label   - Export keying material using label\n");
     BIO_printf(bio_err,
                " -keymatexportlen len  - Export len bytes of keying material (default 20)\n");
-#ifdef OPENSSL_SYS_WINDOWS
-    BIO_printf(bio_err,
-               " -no_rand_screen  - Do not use RAND_screen() to initialize random state\n");
-#endif
 }
 
 #ifndef OPENSSL_NO_TLSEXT
@@ -706,12 +694,12 @@ int MAIN(int argc, char **argv)
     char *inrand = NULL;
     int mbuf_len = 0;
     struct timeval timeout, *timeoutp;
-#ifndef OPENSSL_NO_ENGINE
     char *engine_id = NULL;
+    ENGINE *e = NULL;
+#ifndef OPENSSL_NO_ENGINE
     char *ssl_client_engine_id = NULL;
     ENGINE *ssl_client_engine = NULL;
 #endif
-    ENGINE *e = NULL;
 #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE) || defined(OPENSSL_SYS_BEOS_R5)
     struct timeval tv;
 # if defined(OPENSSL_SYS_BEOS_R5)
@@ -1148,10 +1136,6 @@ int MAIN(int argc, char **argv)
             keymatexportlen = atoi(*(++argv));
             if (keymatexportlen == 0)
                 goto bad;
-#ifdef OPENSSL_SYS_WINDOWS
-        } else if (strcmp(*argv, "-no_rand_screen") == 0) {
-          c_no_rand_screen = 1;
-#endif
         } else {
             BIO_printf(bio_err, "unknown option %s\n", *argv);
             badop = 1;
@@ -1202,8 +1186,8 @@ int MAIN(int argc, char **argv)
         next_proto.data = NULL;
 #endif
 
-#ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine_id, 1);
+#ifndef OPENSSL_NO_ENGINE
     if (ssl_client_engine_id) {
         ssl_client_engine = ENGINE_by_id(ssl_client_engine_id);
         if (!ssl_client_engine) {
@@ -1268,7 +1252,7 @@ int MAIN(int argc, char **argv)
     if (!load_excert(&exc, bio_err))
         goto end;
 
-    if (!app_RAND_load_file(NULL, bio_err, ++c_no_rand_screen) && inrand == NULL
+    if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
         && !RAND_status()) {
         BIO_printf(bio_err,
                    "warning, not much extra random data, consider using the -rand option\n");
@@ -1806,7 +1790,10 @@ int MAIN(int argc, char **argv)
                     tv.tv_usec = 0;
                     i = select(width, (void *)&readfds, (void *)&writefds,
                                NULL, &tv);
-#if defined(OPENSSL_USE_STD_INPUT_HANDLE)
+# if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
+                    if (!i && (!_kbhit() || !read_tty))
+                        continue;
+# else
                     if (!i && (!((_kbhit())
                                  || (WAIT_OBJECT_0 ==
                                      WaitForSingleObject(GetStdHandle
@@ -1814,8 +1801,6 @@ int MAIN(int argc, char **argv)
                                                          0)))
                                || !read_tty))
                         continue;
-#else
-                    if(!i && (!_kbhit() || !read_tty) ) continue;
 # endif
                 } else
                     i = select(width, (void *)&readfds, (void *)&writefds,
@@ -2017,12 +2002,12 @@ int MAIN(int argc, char **argv)
             }
         }
 #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
-#if defined(OPENSSL_USE_STD_INPUT_HANDLE)
+# if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
+        else if (_kbhit())
+# else
         else if ((_kbhit())
                  || (WAIT_OBJECT_0 ==
                      WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0)))
-#else
-        else if (_kbhit())
 # endif
 #elif defined (OPENSSL_SYS_NETWARE)
         else if (_kbhit())
@@ -2138,6 +2123,7 @@ int MAIN(int argc, char **argv)
         OPENSSL_cleanse(mbuf, BUFSIZZ);
         OPENSSL_free(mbuf);
     }
+    release_engine(e);
     if (bio_c_out != NULL) {
         BIO_free(bio_c_out);
         bio_c_out = NULL;

deps/openssl/openssl/apps/s_server.c

@@ -328,9 +328,7 @@ static char *keymatexportlabel = NULL;
 static int keymatexportlen = 20;
 
 static int hack = 0;
-#ifndef OPENSSL_NO_ENGINE
 static char *engine_id = NULL;
-#endif
 static const char *session_id_prefix = NULL;
 
 static int enable_timeouts = 0;
@@ -484,9 +482,7 @@ static void s_server_init(void)
     s_quiet = 0;
     s_brief = 0;
     hack = 0;
-# ifndef OPENSSL_NO_ENGINE
     engine_id = NULL;
-# endif
 }
 #endif
 
@@ -1603,9 +1599,7 @@ int MAIN(int argc, char *argv[])
     SSL_load_error_strings();
     OpenSSL_add_ssl_algorithms();
 
-#ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine_id, 1);
-#endif
 
     if (!app_passwd(bio_err, passarg, dpassarg, &pass, &dpass)) {
         BIO_printf(bio_err, "Error getting password\n");
@@ -2129,6 +2123,7 @@ int MAIN(int argc, char *argv[])
     if (jpake_secret && psk_key)
         OPENSSL_free(psk_key);
 #endif
+    release_engine(e);
     if (bio_s_out != NULL) {
         BIO_free(bio_s_out);
         bio_s_out = NULL;

deps/openssl/openssl/apps/smime.c

@@ -114,9 +114,7 @@ int MAIN(int argc, char **argv)
     const EVP_MD *sign_md = NULL;
     int informat = FORMAT_SMIME, outformat = FORMAT_SMIME;
     int keyform = FORMAT_PEM;
-#ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-#endif
 
     X509_VERIFY_PARAM *vpm = NULL;
 
@@ -461,9 +459,7 @@ int MAIN(int argc, char **argv)
                    "cert.pem       recipient certificate(s) for encryption\n");
         goto end;
     }
-#ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine, 0);
-#endif
 
     if (!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
         BIO_printf(bio_err, "Error getting password\n");
@@ -736,6 +732,7 @@ int MAIN(int argc, char **argv)
     X509_free(signer);
     EVP_PKEY_free(key);
     PKCS7_free(p7);
+    release_engine(e);
     BIO_free(in);
     BIO_free(indata);
     BIO_free_all(out);

deps/openssl/openssl/apps/speed.c

@@ -372,6 +372,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 {
+    ENGINE *e = NULL;
     unsigned char *buf = NULL, *buf2 = NULL;
     int mret = 1;
     long count = 0, save_count = 0;
@@ -669,6 +670,10 @@ int MAIN(int argc, char **argv)
         ecdh_b[i] = NULL;
     }
 # endif
+# ifndef OPENSSL_NO_RSA
+    for (i = 0; i < RSA_NUM; i++)
+        rsa_key[i] = NULL;
+# endif
 
     if (bio_err == NULL)
         if ((bio_err = BIO_new(BIO_s_file())) != NULL)
@@ -677,12 +682,6 @@ int MAIN(int argc, char **argv)
     if (!load_config(bio_err, NULL))
         goto end;
 
-# ifndef OPENSSL_NO_RSA
-    memset(rsa_key, 0, sizeof(rsa_key));
-    for (i = 0; i < RSA_NUM; i++)
-        rsa_key[i] = NULL;
-# endif
-
     if ((buf = (unsigned char *)OPENSSL_malloc((int)BUFSIZE)) == NULL) {
         BIO_printf(bio_err, "out of memory\n");
         goto end;
@@ -749,7 +748,7 @@ int MAIN(int argc, char **argv)
                 BIO_printf(bio_err, "no engine given\n");
                 goto end;
             }
-            setup_engine(bio_err, *argv, 0);
+            e = setup_engine(bio_err, *argv, 0);
             /*
              * j will be increased again further down.  We just don't want
              * speed to confuse an engine with an algorithm, especially when
@@ -2526,6 +2525,7 @@ int MAIN(int argc, char **argv)
     }
 # endif
 
+    release_engine(e);
     apps_shutdown();
     OPENSSL_EXIT(mret);
 }

deps/openssl/openssl/apps/spkac.c

@@ -94,9 +94,7 @@ int MAIN(int argc, char **argv)
     CONF *conf = NULL;
     NETSCAPE_SPKI *spki = NULL;
     EVP_PKEY *pkey = NULL;
-#ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-#endif
 
     apps_startup();
 
@@ -185,9 +183,7 @@ int MAIN(int argc, char **argv)
         BIO_printf(bio_err, "Error getting password\n");
         goto end;
     }
-#ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine, 0);
-#endif
 
     if (keyfile) {
         pkey = load_key(bio_err,
@@ -305,6 +301,7 @@ int MAIN(int argc, char **argv)
     BIO_free(in);
     BIO_free_all(out);
     EVP_PKEY_free(pkey);
+    release_engine(e);
     if (passin)
         OPENSSL_free(passin);
     apps_shutdown();

deps/openssl/openssl/apps/srp.c

@@ -293,9 +293,8 @@ int MAIN(int argc, char **argv)
     int i;
     long errorline = -1;
     char *randfile = NULL;
-# ifndef OPENSSL_NO_ENGINE
+    ENGINE *e = NULL;
     char *engine = NULL;
-# endif
     char *tofree = NULL;
     DB_ATTR db_attr;
 
@@ -411,9 +410,7 @@ int MAIN(int argc, char **argv)
 
     ERR_load_crypto_strings();
 
-# ifndef OPENSSL_NO_ENGINE
-    setup_engine(bio_err, engine, 0);
-# endif
+    e = setup_engine(bio_err, engine, 0);
 
     if (!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
         BIO_printf(bio_err, "Error getting passwords\n");
@@ -760,6 +757,7 @@ int MAIN(int argc, char **argv)
     if (db)
         free_index(db);
 
+    release_engine(e);
     OBJ_cleanup();
     apps_shutdown();
     OPENSSL_EXIT(ret);

deps/openssl/openssl/apps/verify.c

@@ -89,9 +89,7 @@ int MAIN(int argc, char **argv)
     X509_LOOKUP *lookup = NULL;
     X509_VERIFY_PARAM *vpm = NULL;
     int crl_download = 0;
-#ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-#endif
 
     cert_ctx = X509_STORE_new();
     if (cert_ctx == NULL)
@@ -160,9 +158,7 @@ int MAIN(int argc, char **argv)
             break;
     }
 
-#ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine, 0);
-#endif
 
     if (vpm)
         X509_STORE_set1_param(cert_ctx, vpm);
@@ -255,6 +251,7 @@ int MAIN(int argc, char **argv)
     sk_X509_pop_free(untrusted, X509_free);
     sk_X509_pop_free(trusted, X509_free);
     sk_X509_CRL_pop_free(crls, X509_CRL_free);
+    release_engine(e);
     apps_shutdown();
     OPENSSL_EXIT(ret < 0 ? 2 : ret);
 }

deps/openssl/openssl/apps/x509.c

@@ -218,9 +218,7 @@ int MAIN(int argc, char **argv)
     char *checkhost = NULL;
     char *checkemail = NULL;
     char *checkip = NULL;
-#ifndef OPENSSL_NO_ENGINE
     char *engine = NULL;
-#endif
 
     reqfile = 0;
 
@@ -501,9 +499,7 @@ int MAIN(int argc, char **argv)
             BIO_printf(bio_err, "%s", *pp);
         goto end;
     }
-#ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine, 0);
-#endif
 
     if (need_rand)
         app_RAND_load_file(NULL, bio_err, 0);
@@ -1040,6 +1036,7 @@ int MAIN(int argc, char **argv)
     ASN1_INTEGER_free(sno);
     sk_ASN1_OBJECT_pop_free(trust, ASN1_OBJECT_free);
     sk_ASN1_OBJECT_pop_free(reject, ASN1_OBJECT_free);
+    release_engine(e);
     if (passin)
         OPENSSL_free(passin);
     apps_shutdown();

deps/openssl/openssl/crypto/aes/asm/aes-s390x.pl

@@ -1568,8 +1568,8 @@ ___
 }
 
 ########################################################################
-# void AES_xts_encrypt(const char *inp,char *out,size_t len,
-#	const AES_KEY *key1, const AES_KEY *key2,
+# void AES_xts_encrypt(const unsigned char *inp, unsigned char *out,
+#	size_t len, const AES_KEY *key1, const AES_KEY *key2,
 #	const unsigned char iv[16]);
 #
 {
@@ -1937,8 +1937,8 @@ $code.=<<___;
 	br	$ra
 .size	AES_xts_encrypt,.-AES_xts_encrypt
 ___
-# void AES_xts_decrypt(const char *inp,char *out,size_t len,
-#	const AES_KEY *key1, const AES_KEY *key2,
+# void AES_xts_decrypt(const unsigned char *inp, unsigned char *out,
+#	size_t len, const AES_KEY *key1, const AES_KEY *key2,
 #	const unsigned char iv[16]);
 #
 $code.=<<___;

deps/openssl/openssl/crypto/asn1/p5_pbev2.c

@@ -91,12 +91,11 @@ X509_ALGOR *PKCS5_pbe2_set_iv(const EVP_CIPHER *cipher, int iter,
                               unsigned char *salt, int saltlen,
                               unsigned char *aiv, int prf_nid)
 {
-    X509_ALGOR *scheme = NULL, *kalg = NULL, *ret = NULL;
+    X509_ALGOR *scheme = NULL, *ret = NULL;
     int alg_nid, keylen;
     EVP_CIPHER_CTX ctx;
     unsigned char iv[EVP_MAX_IV_LENGTH];
     PBE2PARAM *pbe2 = NULL;
-    ASN1_OBJECT *obj;
 
     alg_nid = EVP_CIPHER_type(cipher);
     if (alg_nid == NID_undef) {
@@ -104,7 +103,6 @@ X509_ALGOR *PKCS5_pbe2_set_iv(const EVP_CIPHER *cipher, int iter,
                 ASN1_R_CIPHER_HAS_NO_OBJECT_IDENTIFIER);
         goto err;
     }
-    obj = OBJ_nid2obj(alg_nid);
 
     if (!(pbe2 = PBE2PARAM_new()))
         goto merr;
@@ -112,7 +110,7 @@ X509_ALGOR *PKCS5_pbe2_set_iv(const EVP_CIPHER *cipher, int iter,
     /* Setup the AlgorithmIdentifier for the encryption scheme */
     scheme = pbe2->encryption;
 
-    scheme->algorithm = obj;
+    scheme->algorithm = OBJ_nid2obj(alg_nid);
     if (!(scheme->parameter = ASN1_TYPE_new()))
         goto merr;
 
@@ -188,11 +186,9 @@ X509_ALGOR *PKCS5_pbe2_set_iv(const EVP_CIPHER *cipher, int iter,
  err:
     PBE2PARAM_free(pbe2);
     /* Note 'scheme' is freed as part of pbe2 */
-    X509_ALGOR_free(kalg);
     X509_ALGOR_free(ret);
 
     return NULL;
-
 }
 
 X509_ALGOR *PKCS5_pbe2_set(const EVP_CIPHER *cipher, int iter,

deps/openssl/openssl/crypto/asn1/x_crl.c

@@ -254,6 +254,7 @@ static int crl_cb(int operation, ASN1_VALUE **pval, const ASN1_ITEM *it,
 
         for (idx = 0; idx < sk_X509_EXTENSION_num(exts); idx++) {
             int nid;
+
             ext = sk_X509_EXTENSION_value(exts, idx);
             nid = OBJ_obj2nid(ext->object);
             if (nid == NID_freshest_crl)
@@ -263,7 +264,7 @@ static int crl_cb(int operation, ASN1_VALUE **pval, const ASN1_ITEM *it,
                 if ((nid == NID_issuing_distribution_point)
                     || (nid == NID_authority_key_identifier)
                     || (nid == NID_delta_crl))
-                    break;;
+                    continue;
                 crl->flags |= EXFLAG_CRITICAL;
                 break;
             }

deps/openssl/openssl/crypto/bn/asm/x86_64-mont.pl

@@ -1148,18 +1148,17 @@ $code.=<<___;
 	mulx	2*8($aptr),%r15,%r13	# ...
 	adox	-3*8($tptr),%r11
 	adcx	%r15,%r12
-	adox	$zero,%r12
+	adox	-2*8($tptr),%r12
 	adcx	$zero,%r13
+	adox	$zero,%r13
 
 	mov	$bptr,8(%rsp)		# off-load &b[i]
-	.byte	0x67
 	mov	$mi,%r15
 	imulq	24(%rsp),$mi		# "t[0]"*n0
 	xor	%ebp,%ebp		# xor	$zero,$zero	# cf=0, of=0
 
 	mulx	3*8($aptr),%rax,%r14
 	 mov	$mi,%rdx
-	adox	-2*8($tptr),%r12
 	adcx	%rax,%r13
 	adox	-1*8($tptr),%r13
 	adcx	$zero,%r14

deps/openssl/openssl/crypto/bn/asm/x86_64-mont5.pl

@@ -1925,6 +1925,7 @@ __bn_sqr8x_reduction:
 
 .align	32
 .L8x_tail_done:
+	xor	%rax,%rax
 	add	(%rdx),%r8		# can this overflow?
 	adc	\$0,%r9
 	adc	\$0,%r10
@@ -1932,10 +1933,8 @@ __bn_sqr8x_reduction:
 	adc	\$0,%r12
 	adc	\$0,%r13
 	adc	\$0,%r14
-	adc	\$0,%r15		# can't overflow, because we
-					# started with "overhung" part
-					# of multiplication
-	xor	%rax,%rax
+	adc	\$0,%r15
+	adc	\$0,%rax
 
 	neg	$carry
 .L8x_no_tail:
@@ -3375,6 +3374,7 @@ __bn_sqrx8x_reduction:
 
 .align	32
 .Lsqrx8x_tail_done:
+	xor	%rax,%rax
 	add	24+8(%rsp),%r8		# can this overflow?
 	adc	\$0,%r9
 	adc	\$0,%r10
@@ -3382,10 +3382,8 @@ __bn_sqrx8x_reduction:
 	adc	\$0,%r12
 	adc	\$0,%r13
 	adc	\$0,%r14
-	adc	\$0,%r15		# can't overflow, because we
-					# started with "overhung" part
-					# of multiplication
-	mov	$carry,%rax		# xor	%rax,%rax
+	adc	\$0,%r15
+	adc	\$0,%rax
 
 	sub	16+8(%rsp),$carry	# mov 16(%rsp),%cf
 .Lsqrx8x_no_tail:			# %cf is 0 if jumped here
@@ -3400,7 +3398,7 @@ __bn_sqrx8x_reduction:
 	adc	8*5($tptr),%r13
 	adc	8*6($tptr),%r14
 	adc	8*7($tptr),%r15
-	adc	%rax,%rax		# top-most carry
+	adc	\$0,%rax		# top-most carry
 
 	mov	32+8(%rsp),%rbx		# n0
 	mov	8*8($tptr,%rcx),%rdx	# modulo-scheduled "%r8"

deps/openssl/openssl/crypto/bn/bn_exp.c

@@ -180,8 +180,9 @@ int BN_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx)
                 goto err;
         }
     }
-    if (r != rr)
-        BN_copy(r, rr);
+    if (r != rr && BN_copy(r, rr) == NULL)
+        goto err;
+
     ret = 1;
  err:
     BN_CTX_end(ctx);

deps/openssl/openssl/crypto/bn/bn_mul.c

@@ -1083,8 +1083,9 @@ int BN_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
  end:
 #endif
     bn_correct_top(rr);
-    if (r != rr)
-        BN_copy(r, rr);
+    if (r != rr && BN_copy(r, rr) == NULL)
+        goto err;
+
     ret = 1;
  err:
     bn_check_top(r);

deps/openssl/openssl/crypto/bn/bn_prime.c

@@ -283,7 +283,8 @@ int BN_is_prime_fasttest_ex(const BIGNUM *a, int checks, BN_CTX *ctx_passed,
         BIGNUM *t;
         if ((t = BN_CTX_get(ctx)) == NULL)
             goto err;
-        BN_copy(t, a);
+        if (BN_copy(t, a) == NULL)
+            goto err;
         t->neg = 0;
         A = t;
     } else

deps/openssl/openssl/crypto/bn/bn_sqr.c

@@ -143,8 +143,9 @@ int BN_sqr(BIGNUM *r, const BIGNUM *a, BN_CTX *ctx)
         rr->top = max - 1;
     else
         rr->top = max;
-    if (rr != r)
-        BN_copy(r, rr);
+    if (r != rr && BN_copy(r, rr) == NULL)
+        goto err;
+
     ret = 1;
  err:
     bn_check_top(rr);

deps/openssl/openssl/crypto/cms/cms_kari.c

@@ -401,9 +401,12 @@ static int cms_wrap_init(CMS_KeyAgreeRecipientInfo *kari,
      * Pick a cipher based on content encryption cipher. If it is DES3 use
      * DES3 wrap otherwise use AES wrap similar to key size.
      */
+#ifndef OPENSSL_NO_DES
     if (EVP_CIPHER_type(cipher) == NID_des_ede3_cbc)
         kekcipher = EVP_des_ede3_wrap();
-    else if (keylen <= 16)
+    else
+#endif
+    if (keylen <= 16)
         kekcipher = EVP_aes_128_wrap();
     else if (keylen <= 24)
         kekcipher = EVP_aes_192_wrap();

deps/openssl/openssl/crypto/dh/dh_key.c

@@ -223,6 +223,8 @@ static int compute_key(unsigned char *key, const BIGNUM *pub_key, DH *dh)
         goto err;
     BN_CTX_start(ctx);
     tmp = BN_CTX_get(ctx);
+    if (tmp == NULL)
+        goto err;
 
     if (dh->priv_key == NULL) {
         DHerr(DH_F_COMPUTE_KEY, DH_R_NO_PRIVATE_VALUE);

deps/openssl/openssl/crypto/dsa/dsa_pmeth.c

@@ -180,7 +180,7 @@ static int pkey_dsa_ctrl(EVP_PKEY_CTX *ctx, int type, int p1, void *p2)
             DSAerr(DSA_F_PKEY_DSA_CTRL, DSA_R_INVALID_DIGEST_TYPE);
             return 0;
         }
-        dctx->md = p2;
+        dctx->pmd = p2;
         return 1;
 
     case EVP_PKEY_CTRL_MD:

deps/openssl/openssl/crypto/ec/ec2_mult.c

@@ -267,7 +267,7 @@ static int ec_GF2m_montgomery_point_multiply(const EC_GROUP *group,
                                              BN_CTX *ctx)
 {
     BIGNUM *x1, *x2, *z1, *z2;
-    int ret = 0, i;
+    int ret = 0, i, group_top;
     BN_ULONG mask, word;
 
     if (r == point) {
@@ -297,10 +297,12 @@ static int ec_GF2m_montgomery_point_multiply(const EC_GROUP *group,
     x2 = &r->X;
     z2 = &r->Y;
 
-    bn_wexpand(x1, group->field.top);
-    bn_wexpand(z1, group->field.top);
-    bn_wexpand(x2, group->field.top);
-    bn_wexpand(z2, group->field.top);
+    group_top = group->field.top;
+    if (bn_wexpand(x1, group_top) == NULL
+        || bn_wexpand(z1, group_top) == NULL
+        || bn_wexpand(x2, group_top) == NULL
+        || bn_wexpand(z2, group_top) == NULL)
+        goto err;
 
     if (!BN_GF2m_mod_arr(x1, &point->X, group->poly))
         goto err;               /* x1 = x */
@@ -329,14 +331,14 @@ static int ec_GF2m_montgomery_point_multiply(const EC_GROUP *group,
     for (; i >= 0; i--) {
         word = scalar->d[i];
         while (mask) {
-            BN_consttime_swap(word & mask, x1, x2, group->field.top);
-            BN_consttime_swap(word & mask, z1, z2, group->field.top);
+            BN_consttime_swap(word & mask, x1, x2, group_top);
+            BN_consttime_swap(word & mask, z1, z2, group_top);
             if (!gf2m_Madd(group, &point->X, x2, z2, x1, z1, ctx))
                 goto err;
             if (!gf2m_Mdouble(group, x1, z1, ctx))
                 goto err;
-            BN_consttime_swap(word & mask, x1, x2, group->field.top);
-            BN_consttime_swap(word & mask, z1, z2, group->field.top);
+            BN_consttime_swap(word & mask, x1, x2, group_top);
+            BN_consttime_swap(word & mask, z1, z2, group_top);
             mask >>= 1;
         }
         mask = BN_TBIT;

deps/openssl/openssl/crypto/ecdh/ech_ossl.c

@@ -212,7 +212,9 @@ static int ecdh_compute_key(void *out, size_t outlen, const EC_POINT *pub_key,
         BN_CTX_end(ctx);
     if (ctx)
         BN_CTX_free(ctx);
-    if (buf)
+    if (buf) {
+        OPENSSL_cleanse(buf, buflen);
         OPENSSL_free(buf);
+    }
     return (ret);
 }

deps/openssl/openssl/crypto/err/err.c

@@ -868,6 +868,9 @@ void ERR_error_string_n(unsigned long e, char *buf, size_t len)
     const char *ls, *fs, *rs;
     unsigned long l, f, r;
 
+    if (len == 0)
+        return;
+
     l = ERR_GET_LIB(e);
     f = ERR_GET_FUNC(e);
     r = ERR_GET_REASON(e);

deps/openssl/openssl/crypto/evp/e_aes.c

@@ -155,10 +155,10 @@ void AES_ctr32_encrypt(const unsigned char *in, unsigned char *out,
                        const unsigned char ivec[AES_BLOCK_SIZE]);
 # endif
 # ifdef AES_XTS_ASM
-void AES_xts_encrypt(const char *inp, char *out, size_t len,
+void AES_xts_encrypt(const unsigned char *inp, unsigned char *out, size_t len,
                      const AES_KEY *key1, const AES_KEY *key2,
                      const unsigned char iv[16]);
-void AES_xts_decrypt(const char *inp, char *out, size_t len,
+void AES_xts_decrypt(const unsigned char *inp, unsigned char *out, size_t len,
                      const AES_KEY *key1, const AES_KEY *key2,
                      const unsigned char iv[16]);
 # endif

deps/openssl/openssl/crypto/evp/e_rc4_hmac_md5.c

@@ -269,6 +269,8 @@ static int rc4_hmac_md5_ctrl(EVP_CIPHER_CTX *ctx, int type, int arg,
             len = p[arg - 2] << 8 | p[arg - 1];
 
             if (!ctx->encrypt) {
+                if (len < MD5_DIGEST_LENGTH)
+                    return -1;
                 len -= MD5_DIGEST_LENGTH;
                 p[arg - 2] = len >> 8;
                 p[arg - 1] = len;

deps/openssl/openssl/crypto/evp/evp.h

@@ -1370,6 +1370,7 @@ void EVP_add_alg_module(void);
  * The following lines are auto generated by the script mkerr.pl. Any changes
  * made after this point may be overwritten when the script is next run.
  */
+
 void ERR_load_EVP_strings(void);
 
 /* Error codes for the EVP functions. */
@@ -1489,6 +1490,7 @@ void ERR_load_EVP_strings(void);
 # define EVP_R_INPUT_NOT_INITIALIZED                      111
 # define EVP_R_INVALID_DIGEST                             152
 # define EVP_R_INVALID_FIPS_MODE                          168
+# define EVP_R_INVALID_KEY                                171
 # define EVP_R_INVALID_KEY_LENGTH                         130
 # define EVP_R_INVALID_OPERATION                          148
 # define EVP_R_IV_TOO_LARGE                               102
@@ -1528,7 +1530,7 @@ void ERR_load_EVP_strings(void);
 # define EVP_R_WRONG_FINAL_BLOCK_LENGTH                   109
 # define EVP_R_WRONG_PUBLIC_KEY_TYPE                      110
 
-#ifdef  __cplusplus
+# ifdef  __cplusplus
 }
-#endif
+# endif
 #endif

deps/openssl/openssl/crypto/evp/evp_err.c

@@ -1,6 +1,6 @@
 /* crypto/evp/evp_err.c */
 /* ====================================================================
- * Copyright (c) 1999-2013 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1999-2016 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -192,6 +192,7 @@ static ERR_STRING_DATA EVP_str_reasons[] = {
     {ERR_REASON(EVP_R_INPUT_NOT_INITIALIZED), "input not initialized"},
     {ERR_REASON(EVP_R_INVALID_DIGEST), "invalid digest"},
     {ERR_REASON(EVP_R_INVALID_FIPS_MODE), "invalid fips mode"},
+    {ERR_REASON(EVP_R_INVALID_KEY), "invalid key"},
     {ERR_REASON(EVP_R_INVALID_KEY_LENGTH), "invalid key length"},
     {ERR_REASON(EVP_R_INVALID_OPERATION), "invalid operation"},
     {ERR_REASON(EVP_R_IV_TOO_LARGE), "iv too large"},

deps/openssl/openssl/crypto/evp/pmeth_fn.c

@@ -65,17 +65,19 @@
 #include "evp_locl.h"
 
 #define M_check_autoarg(ctx, arg, arglen, err) \
-        if (ctx->pmeth->flags & EVP_PKEY_FLAG_AUTOARGLEN) \
-                { \
+    if (ctx->pmeth->flags & EVP_PKEY_FLAG_AUTOARGLEN) {           \
         size_t pksize = (size_t)EVP_PKEY_size(ctx->pkey);         \
-                if (!arg) \
-                        { \
+                                                                  \
+        if (pksize == 0) {                                        \
+            EVPerr(err, EVP_R_INVALID_KEY); /*ckerr_ignore*/      \
+            return 0;                                             \
+        }                                                         \
+        if (!arg) {                                               \
             *arglen = pksize;                                     \
             return 1;                                             \
         }                                                         \
-                else if (*arglen < pksize) \
-                        { \
-                        EVPerr(err, EVP_R_BUFFER_TOO_SMALL); /*ckerr_ignore*/\
+        if (*arglen < pksize) {                                   \
+            EVPerr(err, EVP_R_BUFFER_TOO_SMALL); /*ckerr_ignore*/ \
             return 0;                                             \
         }                                                         \
     }

deps/openssl/openssl/crypto/evp/pmeth_lib.c

@@ -199,6 +199,7 @@ static EVP_PKEY_CTX *int_ctx_new(EVP_PKEY *pkey, ENGINE *e, int id)
 EVP_PKEY_METHOD *EVP_PKEY_meth_new(int id, int flags)
 {
     EVP_PKEY_METHOD *pmeth;
+
     pmeth = OPENSSL_malloc(sizeof(EVP_PKEY_METHOD));
     if (!pmeth)
         return NULL;
@@ -207,33 +208,6 @@ EVP_PKEY_METHOD *EVP_PKEY_meth_new(int id, int flags)
 
     pmeth->pkey_id = id;
     pmeth->flags = flags | EVP_PKEY_FLAG_DYNAMIC;
-
-    pmeth->init = 0;
-    pmeth->copy = 0;
-    pmeth->cleanup = 0;
-    pmeth->paramgen_init = 0;
-    pmeth->paramgen = 0;
-    pmeth->keygen_init = 0;
-    pmeth->keygen = 0;
-    pmeth->sign_init = 0;
-    pmeth->sign = 0;
-    pmeth->verify_init = 0;
-    pmeth->verify = 0;
-    pmeth->verify_recover_init = 0;
-    pmeth->verify_recover = 0;
-    pmeth->signctx_init = 0;
-    pmeth->signctx = 0;
-    pmeth->verifyctx_init = 0;
-    pmeth->verifyctx = 0;
-    pmeth->encrypt_init = 0;
-    pmeth->encrypt = 0;
-    pmeth->decrypt_init = 0;
-    pmeth->decrypt = 0;
-    pmeth->derive_init = 0;
-    pmeth->derive = 0;
-    pmeth->ctrl = 0;
-    pmeth->ctrl_str = 0;
-
     return pmeth;
 }
 

deps/openssl/openssl/crypto/modes/ctr128.c

@@ -100,7 +100,7 @@ static void ctr128_inc_aligned(unsigned char *counter)
         --n;
         d = data[n] += c;
         /* did addition carry? */
-        c = ((d - c) ^ d) >> (sizeof(size_t) * 8 - 1);
+        c = ((d - c) & ~d) >> (sizeof(size_t) * 8 - 1);
     } while (n);
 }
 #endif

deps/openssl/openssl/crypto/opensslconf.h

@@ -1 +1,265 @@
-#include "../../config/opensslconf.h"
+/* opensslconf.h */
+/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+/* OpenSSL was configured with the following options: */
+#ifndef OPENSSL_DOING_MAKEDEPEND
+
+
+#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128
+# define OPENSSL_NO_EC_NISTP_64_GCC_128
+#endif
+#ifndef OPENSSL_NO_GMP
+# define OPENSSL_NO_GMP
+#endif
+#ifndef OPENSSL_NO_JPAKE
+# define OPENSSL_NO_JPAKE
+#endif
+#ifndef OPENSSL_NO_KRB5
+# define OPENSSL_NO_KRB5
+#endif
+#ifndef OPENSSL_NO_LIBUNBOUND
+# define OPENSSL_NO_LIBUNBOUND
+#endif
+#ifndef OPENSSL_NO_MD2
+# define OPENSSL_NO_MD2
+#endif
+#ifndef OPENSSL_NO_RC5
+# define OPENSSL_NO_RC5
+#endif
+#ifndef OPENSSL_NO_RFC3779
+# define OPENSSL_NO_RFC3779
+#endif
+#ifndef OPENSSL_NO_SCTP
+# define OPENSSL_NO_SCTP
+#endif
+#ifndef OPENSSL_NO_SSL_TRACE
+# define OPENSSL_NO_SSL_TRACE
+#endif
+#ifndef OPENSSL_NO_SSL2
+# define OPENSSL_NO_SSL2
+#endif
+#ifndef OPENSSL_NO_STORE
+# define OPENSSL_NO_STORE
+#endif
+#ifndef OPENSSL_NO_UNIT_TEST
+# define OPENSSL_NO_UNIT_TEST
+#endif
+#ifndef OPENSSL_NO_WEAK_SSL_CIPHERS
+# define OPENSSL_NO_WEAK_SSL_CIPHERS
+#endif
+
+#endif /* OPENSSL_DOING_MAKEDEPEND */
+
+#ifndef OPENSSL_NO_DYNAMIC_ENGINE
+# define OPENSSL_NO_DYNAMIC_ENGINE
+#endif
+
+/* The OPENSSL_NO_* macros are also defined as NO_* if the application
+   asks for it.  This is a transient feature that is provided for those
+   who haven't had the time to do the appropriate changes in their
+   applications.  */
+#ifdef OPENSSL_ALGORITHM_DEFINES
+# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128)
+#  define NO_EC_NISTP_64_GCC_128
+# endif
+# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP)
+#  define NO_GMP
+# endif
+# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE)
+#  define NO_JPAKE
+# endif
+# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
+#  define NO_KRB5
+# endif
+# if defined(OPENSSL_NO_LIBUNBOUND) && !defined(NO_LIBUNBOUND)
+#  define NO_LIBUNBOUND
+# endif
+# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2)
+#  define NO_MD2
+# endif
+# if defined(OPENSSL_NO_RC5) && !defined(NO_RC5)
+#  define NO_RC5
+# endif
+# if defined(OPENSSL_NO_RFC3779) && !defined(NO_RFC3779)
+#  define NO_RFC3779
+# endif
+# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP)
+#  define NO_SCTP
+# endif
+# if defined(OPENSSL_NO_SSL_TRACE) && !defined(NO_SSL_TRACE)
+#  define NO_SSL_TRACE
+# endif
+# if defined(OPENSSL_NO_SSL2) && !defined(NO_SSL2)
+#  define NO_SSL2
+# endif
+# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE)
+#  define NO_STORE
+# endif
+# if defined(OPENSSL_NO_UNIT_TEST) && !defined(NO_UNIT_TEST)
+#  define NO_UNIT_TEST
+# endif
+# if defined(OPENSSL_NO_WEAK_SSL_CIPHERS) && !defined(NO_WEAK_SSL_CIPHERS)
+#  define NO_WEAK_SSL_CIPHERS
+# endif
+#endif
+
+/* crypto/opensslconf.h.in */
+
+/* Generate 80386 code? */
+#undef I386_ONLY
+
+#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
+#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
+#define ENGINESDIR "/usr/local/ssl/lib/engines"
+#define OPENSSLDIR "/usr/local/ssl"
+#endif
+#endif
+
+#undef OPENSSL_UNISTD
+#define OPENSSL_UNISTD <unistd.h>
+
+#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
+
+#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
+#define IDEA_INT unsigned int
+#endif
+
+#if defined(HEADER_MD2_H) && !defined(MD2_INT)
+#define MD2_INT unsigned int
+#endif
+
+#if defined(HEADER_RC2_H) && !defined(RC2_INT)
+/* I need to put in a mod for the alpha - eay */
+#define RC2_INT unsigned int
+#endif
+
+#if defined(HEADER_RC4_H)
+#if !defined(RC4_INT)
+/* using int types make the structure larger but make the code faster
+ * on most boxes I have tested - up to %20 faster. */
+/*
+ * I don't know what does "most" mean, but declaring "int" is a must on:
+ * - Intel P6 because partial register stalls are very expensive;
+ * - elder Alpha because it lacks byte load/store instructions;
+ */
+#define RC4_INT unsigned int
+#endif
+#if !defined(RC4_CHUNK)
+/*
+ * This enables code handling data aligned at natural CPU word
+ * boundary. See crypto/rc4/rc4_enc.c for further details.
+ */
+#undef RC4_CHUNK
+#endif
+#endif
+
+#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG)
+/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
+ * %20 speed up (longs are 8 bytes, int's are 4). */
+#ifndef DES_LONG
+#define DES_LONG unsigned long
+#endif
+#endif
+
+#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
+#define CONFIG_HEADER_BN_H
+#undef BN_LLONG
+
+/* Should we define BN_DIV2W here? */
+
+/* Only one for the following should be defined */
+#undef SIXTY_FOUR_BIT_LONG
+#undef SIXTY_FOUR_BIT
+#define THIRTY_TWO_BIT
+#endif
+
+#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
+#define CONFIG_HEADER_RC4_LOCL_H
+/* if this is defined data[i] is used instead of *data, this is a %20
+ * speedup on x86 */
+#undef RC4_INDEX
+#endif
+
+#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
+#define CONFIG_HEADER_BF_LOCL_H
+#undef BF_PTR
+#endif /* HEADER_BF_LOCL_H */
+
+#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
+#define CONFIG_HEADER_DES_LOCL_H
+#ifndef DES_DEFAULT_OPTIONS
+/* the following is tweaked from a config script, that is why it is a
+ * protected undef/define */
+#ifndef DES_PTR
+#undef DES_PTR
+#endif
+
+/* This helps C compiler generate the correct code for multiple functional
+ * units.  It reduces register dependancies at the expense of 2 more
+ * registers */
+#ifndef DES_RISC1
+#undef DES_RISC1
+#endif
+
+#ifndef DES_RISC2
+#undef DES_RISC2
+#endif
+
+#if defined(DES_RISC1) && defined(DES_RISC2)
+#error YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
+#endif
+
+/* Unroll the inner loop, this sometimes helps, sometimes hinders.
+ * Very mucy CPU dependant */
+#ifndef DES_UNROLL
+#undef DES_UNROLL
+#endif
+
+/* These default values were supplied by
+ * Peter Gutman <pgut001@cs.auckland.ac.nz>
+ * They are only used if nothing else has been defined */
+#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
+/* Special defines which change the way the code is built depending on the
+   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
+   even newer MIPS CPU's, but at the moment one size fits all for
+   optimization options.  Older Sparc's work better with only UNROLL, but
+   there's no way to tell at compile time what it is you're running on */
+
+#if defined( __sun ) || defined ( sun )		/* Newer Sparc's */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#elif defined( __ultrix )	/* Older MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined( __osf1__ )	/* Alpha */
+#  define DES_PTR
+#  define DES_RISC2
+#elif defined ( _AIX )		/* RS6000 */
+  /* Unknown */
+#elif defined( __hpux )		/* HP-PA */
+  /* Unknown */
+#elif defined( __aux )		/* 68K */
+  /* Unknown */
+#elif defined( __dgux )		/* 88K (but P6 in latest boxes) */
+#  define DES_UNROLL
+#elif defined( __sgi )		/* Newer MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined(i386) || defined(__i386__)	/* x86 boxes, should be gcc */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#endif /* Systems-specific speed defines */
+#endif
+
+#endif /* DES_DEFAULT_OPTIONS */
+#endif /* HEADER_DES_LOCL_H */
+#ifdef  __cplusplus
+}
+#endif

deps/openssl/openssl/crypto/opensslv.h

@@ -30,11 +30,11 @@ extern "C" {
  * (Prior to 0.9.5a beta1, a different scheme was used: MMNNFFRBB for
  *  major minor fix final patch/beta)
  */
-# define OPENSSL_VERSION_NUMBER  0x100020afL
+# define OPENSSL_VERSION_NUMBER  0x100020bfL
 # ifdef OPENSSL_FIPS
-#  define OPENSSL_VERSION_TEXT    "OpenSSL 1.0.2j-fips  26 Sep 2016"
+#  define OPENSSL_VERSION_TEXT    "OpenSSL 1.0.2k-fips  26 Jan 2017"
 # else
-#  define OPENSSL_VERSION_TEXT    "OpenSSL 1.0.2j  26 Sep 2016"
+#  define OPENSSL_VERSION_TEXT    "OpenSSL 1.0.2k  26 Jan 2017"
 # endif
 # define OPENSSL_VERSION_PTEXT   " part of " OPENSSL_VERSION_TEXT
 

deps/openssl/openssl/crypto/perlasm/x86_64-xlate.pl

@@ -250,11 +250,18 @@ my %globals;
 	$self->{base}  =~ s/^[er](.?[0-9xpi])[d]?$/r\1/;
 
 	# Solaris /usr/ccs/bin/as can't handle multiplications
-	# in $self->{label}, new gas requires sign extension...
+	# in $self->{label}...
 	use integer;
 	$self->{label} =~ s/(?<![\w\$\.])(0x?[0-9a-f]+)/oct($1)/egi;
 	$self->{label} =~ s/\b([0-9]+\s*[\*\/\%]\s*[0-9]+)\b/eval($1)/eg;
+
+	# Some assemblers insist on signed presentation of 32-bit
+	# offsets, but sign extension is a tricky business in perl...
+	if ((1<<31)<<1) {
 	    $self->{label} =~ s/\b([0-9]+)\b/$1<<32>>32/eg;
+	} else {
+	    $self->{label} =~ s/\b([0-9]+)\b/$1>>0/eg;
+	}
 
 	if (!$self->{label} && $self->{index} && $self->{scale}==1 &&
 	    $self->{base} =~ /(rbp|r13)/) {

deps/openssl/openssl/crypto/perlasm/x86masm.pl

@@ -18,10 +18,10 @@ sub ::generic
 
     if ($opcode =~ /lea/ && @arg[1] =~ s/.*PTR\s+(\(.*\))$/OFFSET $1/)	# no []
     {	$opcode="mov";	}
-    elsif ($opcode !~ /mov[dq]$/)
+    elsif ($opcode !~ /movq/)
     {	# fix xmm references
-	$arg[0] =~ s/\b[A-Z]+WORD\s+PTR/XMMWORD PTR/i if ($arg[-1]=~/\bxmm[0-7]\b/i);
-	$arg[-1] =~ s/\b[A-Z]+WORD\s+PTR/XMMWORD PTR/i if ($arg[0]=~/\bxmm[0-7]\b/i);
+	$arg[0] =~ s/\b[A-Z]+WORD\s+PTR/XMMWORD PTR/i if ($arg[1]=~/\bxmm[0-7]\b/i);
+	$arg[1] =~ s/\b[A-Z]+WORD\s+PTR/XMMWORD PTR/i if ($arg[0]=~/\bxmm[0-7]\b/i);
     }
 
     &::emit($opcode,@arg);
@@ -82,7 +82,7 @@ TITLE	$_[0].asm
 IF \@Version LT 800
 ECHO MASM version 8.00 or later is strongly recommended.
 ENDIF
-.686
+.486
 .MODEL	FLAT
 OPTION	DOTNAME
 IF \@Version LT 800
@@ -160,13 +160,13 @@ sub ::public_label
 {   push(@out,"PUBLIC\t".&::LABEL($_[0],$nmdecor.$_[0])."\n");   }
 
 sub ::data_byte
-{   push(@out,("DB\t").join(',',splice(@_,0,16))."\n") while(@_);	}
+{   push(@out,("DB\t").join(',',@_)."\n");	}
 
 sub ::data_short
-{   push(@out,("DW\t").join(',',splice(@_,0,8))."\n") while(@_);	}
+{   push(@out,("DW\t").join(',',@_)."\n");	}
 
 sub ::data_word
-{   push(@out,("DD\t").join(',',splice(@_,0,4))."\n") while(@_);	}
+{   push(@out,("DD\t").join(',',@_)."\n");	}
 
 sub ::align
 {   push(@out,"ALIGN\t$_[0]\n");	}

deps/openssl/openssl/crypto/rsa/rsa_gen.c

@@ -142,7 +142,8 @@ static int rsa_builtin_keygen(RSA *rsa, int bits, BIGNUM *e_value,
     if (!rsa->iqmp && ((rsa->iqmp = BN_new()) == NULL))
         goto err;
 
-    BN_copy(rsa->e, e_value);
+    if (BN_copy(rsa->e, e_value) == NULL)
+        goto err;
 
     /* generate p and q */
     for (;;) {

deps/openssl/openssl/crypto/rsa/rsa_oaep.c

@@ -89,17 +89,21 @@ int RSA_padding_add_PKCS1_OAEP_mgf1(unsigned char *to, int tlen,
     }
 
     if (PKCS1_MGF1(dbmask, emlen - mdlen, seed, mdlen, mgf1md) < 0)
-        return 0;
+        goto err;
     for (i = 0; i < emlen - mdlen; i++)
         db[i] ^= dbmask[i];
 
     if (PKCS1_MGF1(seedmask, mdlen, db, emlen - mdlen, mgf1md) < 0)
-        return 0;
+        goto err;
     for (i = 0; i < mdlen; i++)
         seed[i] ^= seedmask[i];
 
     OPENSSL_free(dbmask);
     return 1;
+
+ err:
+    OPENSSL_free(dbmask);
+    return 0;
 }
 
 int RSA_padding_check_PKCS1_OAEP(unsigned char *to, int tlen,

deps/openssl/openssl/crypto/rsa/rsa_pmeth.c

@@ -373,6 +373,10 @@ static int pkey_rsa_verify(EVP_PKEY_CTX *ctx,
         if (rctx->pad_mode == RSA_PKCS1_PADDING)
             return RSA_verify(EVP_MD_type(rctx->md), tbs, tbslen,
                               sig, siglen, rsa);
+        if (tbslen != (size_t)EVP_MD_size(rctx->md)) {
+            RSAerr(RSA_F_PKEY_RSA_VERIFY, RSA_R_INVALID_DIGEST_LENGTH);
+            return -1;
+        }
         if (rctx->pad_mode == RSA_X931_PADDING) {
             if (pkey_rsa_verifyrecover(ctx, NULL, &rslen, sig, siglen) <= 0)
                 return 0;

deps/openssl/openssl/crypto/s390xcap.c

@@ -3,6 +3,7 @@
 #include <string.h>
 #include <setjmp.h>
 #include <signal.h>
+#include "cryptlib.h"
 
 extern unsigned long OPENSSL_s390xcap_P[];
 

deps/openssl/openssl/crypto/ui/ui_lib.c

@@ -164,7 +164,7 @@ static int general_allocate_string(UI *ui, const char *prompt,
     UI_STRING *s = general_allocate_prompt(ui, prompt, prompt_freeable,
                                            type, input_flags, result_buf);
 
-    if (s) {
+    if (s != NULL) {
         if (allocate_string_stack(ui) >= 0) {
             s->_.string_data.result_minsize = minsize;
             s->_.string_data.result_maxsize = maxsize;
@@ -197,8 +197,8 @@ static int general_allocate_boolean(UI *ui,
     } else if (cancel_chars == NULL) {
         UIerr(UI_F_GENERAL_ALLOCATE_BOOLEAN, ERR_R_PASSED_NULL_PARAMETER);
     } else {
-        for (p = ok_chars; *p; p++) {
-            if (strchr(cancel_chars, *p)) {
+        for (p = ok_chars; *p != '\0'; p++) {
+            if (strchr(cancel_chars, *p) != NULL) {
                 UIerr(UI_F_GENERAL_ALLOCATE_BOOLEAN,
                       UI_R_COMMON_OK_AND_CANCEL_CHARACTERS);
             }
@@ -207,7 +207,7 @@ static int general_allocate_boolean(UI *ui,
         s = general_allocate_prompt(ui, prompt, prompt_freeable,
                                     type, input_flags, result_buf);
 
-        if (s) {
+        if (s != NULL) {
             if (allocate_string_stack(ui) >= 0) {
                 s->_.boolean_data.action_desc = action_desc;
                 s->_.boolean_data.ok_chars = ok_chars;
@@ -243,7 +243,7 @@ int UI_dup_input_string(UI *ui, const char *prompt, int flags,
 {
     char *prompt_copy = NULL;
 
-    if (prompt) {
+    if (prompt != NULL) {
         prompt_copy = BUF_strdup(prompt);
         if (prompt_copy == NULL) {
             UIerr(UI_F_UI_DUP_INPUT_STRING, ERR_R_MALLOC_FAILURE);
@@ -271,7 +271,7 @@ int UI_dup_verify_string(UI *ui, const char *prompt, int flags,
 {
     char *prompt_copy = NULL;
 
-    if (prompt) {
+    if (prompt != NULL) {
         prompt_copy = BUF_strdup(prompt);
         if (prompt_copy == NULL) {
             UIerr(UI_F_UI_DUP_VERIFY_STRING, ERR_R_MALLOC_FAILURE);
@@ -302,7 +302,7 @@ int UI_dup_input_boolean(UI *ui, const char *prompt, const char *action_desc,
     char *ok_chars_copy = NULL;
     char *cancel_chars_copy = NULL;
 
-    if (prompt) {
+    if (prompt != NULL) {
         prompt_copy = BUF_strdup(prompt);
         if (prompt_copy == NULL) {
             UIerr(UI_F_UI_DUP_INPUT_BOOLEAN, ERR_R_MALLOC_FAILURE);
@@ -310,7 +310,7 @@ int UI_dup_input_boolean(UI *ui, const char *prompt, const char *action_desc,
         }
     }
 
-    if (action_desc) {
+    if (action_desc != NULL) {
         action_desc_copy = BUF_strdup(action_desc);
         if (action_desc_copy == NULL) {
             UIerr(UI_F_UI_DUP_INPUT_BOOLEAN, ERR_R_MALLOC_FAILURE);
@@ -318,7 +318,7 @@ int UI_dup_input_boolean(UI *ui, const char *prompt, const char *action_desc,
         }
     }
 
-    if (ok_chars) {
+    if (ok_chars != NULL) {
         ok_chars_copy = BUF_strdup(ok_chars);
         if (ok_chars_copy == NULL) {
             UIerr(UI_F_UI_DUP_INPUT_BOOLEAN, ERR_R_MALLOC_FAILURE);
@@ -326,7 +326,7 @@ int UI_dup_input_boolean(UI *ui, const char *prompt, const char *action_desc,
         }
     }
 
-    if (cancel_chars) {
+    if (cancel_chars != NULL) {
         cancel_chars_copy = BUF_strdup(cancel_chars);
         if (cancel_chars_copy == NULL) {
             UIerr(UI_F_UI_DUP_INPUT_BOOLEAN, ERR_R_MALLOC_FAILURE);
@@ -359,7 +359,7 @@ int UI_dup_info_string(UI *ui, const char *text)
 {
     char *text_copy = NULL;
 
-    if (text) {
+    if (text != NULL) {
         text_copy = BUF_strdup(text);
         if (text_copy == NULL) {
             UIerr(UI_F_UI_DUP_INFO_STRING, ERR_R_MALLOC_FAILURE);
@@ -381,7 +381,7 @@ int UI_dup_error_string(UI *ui, const char *text)
 {
     char *text_copy = NULL;
 
-    if (text) {
+    if (text != NULL) {
         text_copy = BUF_strdup(text);
         if (text_copy == NULL) {
             UIerr(UI_F_UI_DUP_ERROR_STRING, ERR_R_MALLOC_FAILURE);
@@ -397,7 +397,7 @@ char *UI_construct_prompt(UI *ui, const char *object_desc,
 {
     char *prompt = NULL;
 
-    if (ui->meth->ui_construct_prompt)
+    if (ui->meth->ui_construct_prompt != NULL)
         prompt = ui->meth->ui_construct_prompt(ui, object_desc, object_name);
     else {
         char prompt1[] = "Enter ";
@@ -408,7 +408,7 @@ char *UI_construct_prompt(UI *ui, const char *object_desc,
         if (object_desc == NULL)
             return NULL;
         len = sizeof(prompt1) - 1 + strlen(object_desc);
-        if (object_name)
+        if (object_name != NULL)
             len += sizeof(prompt2) - 1 + strlen(object_name);
         len += sizeof(prompt3) - 1;
 
@@ -417,7 +417,7 @@ char *UI_construct_prompt(UI *ui, const char *object_desc,
             return NULL;
         BUF_strlcpy(prompt, prompt1, len + 1);
         BUF_strlcat(prompt, object_desc, len + 1);
-        if (object_name) {
+        if (object_name != NULL) {
             BUF_strlcat(prompt, prompt2, len + 1);
             BUF_strlcat(prompt, object_name, len + 1);
         }
@@ -459,7 +459,8 @@ static int print_error(const char *str, size_t len, UI *ui)
     uis.type = UIT_ERROR;
     uis.out_string = str;
 
-    if (ui->meth->ui_write_string && !ui->meth->ui_write_string(ui, &uis))
+    if (ui->meth->ui_write_string != NULL
+        && ui->meth->ui_write_string(ui, &uis) <= 0)
         return -1;
     return 0;
 }
@@ -468,24 +469,28 @@ int UI_process(UI *ui)
 {
     int i, ok = 0;
 
-    if (ui->meth->ui_open_session && !ui->meth->ui_open_session(ui))
-        return -1;
+    if (ui->meth->ui_open_session != NULL
+        && ui->meth->ui_open_session(ui) <= 0) {
+        ok = -1;
+        goto err;
+    }
 
     if (ui->flags & UI_FLAG_PRINT_ERRORS)
         ERR_print_errors_cb((int (*)(const char *, size_t, void *))
                             print_error, (void *)ui);
 
     for (i = 0; i < sk_UI_STRING_num(ui->strings); i++) {
-        if (ui->meth->ui_write_string
-            && !ui->meth->ui_write_string(ui,
-                                          sk_UI_STRING_value(ui->strings, i)))
+        if (ui->meth->ui_write_string != NULL
+            && (ui->meth->ui_write_string(ui,
+                                          sk_UI_STRING_value(ui->strings, i))
+                <= 0))
         {
             ok = -1;
             goto err;
         }
     }
 
-    if (ui->meth->ui_flush)
+    if (ui->meth->ui_flush != NULL)
         switch (ui->meth->ui_flush(ui)) {
         case -1:               /* Interrupt/Cancel/something... */
             ok = -2;
@@ -499,7 +504,7 @@ int UI_process(UI *ui)
         }
 
     for (i = 0; i < sk_UI_STRING_num(ui->strings); i++) {
-        if (ui->meth->ui_read_string) {
+        if (ui->meth->ui_read_string != NULL) {
             switch (ui->meth->ui_read_string(ui,
                                              sk_UI_STRING_value(ui->strings,
                                                                 i))) {
@@ -516,7 +521,8 @@ int UI_process(UI *ui)
         }
     }
  err:
-    if (ui->meth->ui_close_session && !ui->meth->ui_close_session(ui))
+    if (ui->meth->ui_close_session != NULL
+        && ui->meth->ui_close_session(ui) <= 0)
         return -1;
     return ok;
 }
@@ -612,48 +618,48 @@ void UI_destroy_method(UI_METHOD *ui_method)
 
 int UI_method_set_opener(UI_METHOD *method, int (*opener) (UI *ui))
 {
-    if (method) {
+    if (method != NULL) {
         method->ui_open_session = opener;
         return 0;
-    } else
+    }
     return -1;
 }
 
 int UI_method_set_writer(UI_METHOD *method,
                          int (*writer) (UI *ui, UI_STRING *uis))
 {
-    if (method) {
+    if (method != NULL) {
         method->ui_write_string = writer;
         return 0;
-    } else
+    }
     return -1;
 }
 
 int UI_method_set_flusher(UI_METHOD *method, int (*flusher) (UI *ui))
 {
-    if (method) {
+    if (method != NULL) {
         method->ui_flush = flusher;
         return 0;
-    } else
+    }
     return -1;
 }
 
 int UI_method_set_reader(UI_METHOD *method,
                          int (*reader) (UI *ui, UI_STRING *uis))
 {
-    if (method) {
+    if (method != NULL) {
         method->ui_read_string = reader;
         return 0;
-    } else
+    }
     return -1;
 }
 
 int UI_method_set_closer(UI_METHOD *method, int (*closer) (UI *ui))
 {
-    if (method) {
+    if (method != NULL) {
         method->ui_close_session = closer;
         return 0;
-    } else
+    }
     return -1;
 }
 
@@ -664,54 +670,54 @@ int UI_method_set_prompt_constructor(UI_METHOD *method,
                                                                   const char
                                                                   *object_name))
 {
-    if (method) {
+    if (method != NULL) {
         method->ui_construct_prompt = prompt_constructor;
         return 0;
-    } else
+    }
     return -1;
 }
 
-int (*UI_method_get_opener(UI_METHOD *method)) (UI *) {
-    if (method)
+int (*UI_method_get_opener(UI_METHOD *method)) (UI *)
+{
+    if (method != NULL)
         return method->ui_open_session;
-    else
     return NULL;
 }
 
-int (*UI_method_get_writer(UI_METHOD *method)) (UI *, UI_STRING *) {
-    if (method)
+int (*UI_method_get_writer(UI_METHOD *method)) (UI *, UI_STRING *)
+{
+    if (method != NULL)
         return method->ui_write_string;
-    else
     return NULL;
 }
 
-int (*UI_method_get_flusher(UI_METHOD *method)) (UI *) {
-    if (method)
+int (*UI_method_get_flusher(UI_METHOD *method)) (UI *)
+{
+    if (method != NULL)
         return method->ui_flush;
-    else
     return NULL;
 }
 
-int (*UI_method_get_reader(UI_METHOD *method)) (UI *, UI_STRING *) {
-    if (method)
+int (*UI_method_get_reader(UI_METHOD *method)) (UI *, UI_STRING *)
+{
+    if (method != NULL)
         return method->ui_read_string;
-    else
     return NULL;
 }
 
-int (*UI_method_get_closer(UI_METHOD *method)) (UI *) {
-    if (method)
+int (*UI_method_get_closer(UI_METHOD *method)) (UI *)
+{
+    if (method != NULL)
         return method->ui_close_session;
-    else
     return NULL;
 }
 
 char *(*UI_method_get_prompt_constructor(UI_METHOD *method)) (UI *,
                                                               const char *,
-                                                              const char *) {
-    if (method)
+                                                              const char *)
+{
+    if (method != NULL)
         return method->ui_construct_prompt;
-    else
     return NULL;
 }
 

deps/openssl/openssl/crypto/ui/ui_openssl.c

@@ -440,7 +440,7 @@ static int read_string_inner(UI *ui, UI_STRING *uis, int echo, int strip_nl)
 # else
     p = fgets(result, maxsize, tty_in);
 # endif
-    if (!p)
+    if (p == NULL)
         goto error;
     if (feof(tty_in))
         goto error;
@@ -508,19 +508,32 @@ static int open_console(UI *ui)
         if (errno == EINVAL)
             is_a_tty = 0;
         else
+# endif
+# ifdef ENODEV
+            /*
+             * MacOS X returns ENODEV (Operation not supported by device),
+             * which seems appropriate.
+             */
+        if (errno == ENODEV)
+            is_a_tty = 0;
+        else
 # endif
             return 0;
     }
 #endif
 #ifdef OPENSSL_SYS_VMS
     status = sys$assign(&terminal, &channel, 0, 0);
+
+    /* if there isn't a TT device, something is very wrong */
     if (status != SS$_NORMAL)
         return 0;
-    status =
-        sys$qiow(0, channel, IO$_SENSEMODE, &iosb, 0, 0, tty_orig, 12, 0, 0,
-                 0, 0);
+
+    status = sys$qiow(0, channel, IO$_SENSEMODE, &iosb, 0, 0, tty_orig, 12,
+                      0, 0, 0, 0);
+
+    /* If IO$_SENSEMODE doesn't work, this is not a terminal device */
     if ((status != SS$_NORMAL) || (iosb.iosb$w_value != SS$_NORMAL))
-        return 0;
+        is_a_tty = 0;
 #endif
     return 1;
 }
@@ -537,14 +550,15 @@ static int noecho_console(UI *ui)
         return 0;
 #endif
 #ifdef OPENSSL_SYS_VMS
+    if (is_a_tty) {
         tty_new[0] = tty_orig[0];
         tty_new[1] = tty_orig[1] | TT$M_NOECHO;
         tty_new[2] = tty_orig[2];
-    status =
-        sys$qiow(0, channel, IO$_SETMODE, &iosb, 0, 0, tty_new, 12, 0, 0, 0,
-                 0);
+        status = sys$qiow(0, channel, IO$_SETMODE, &iosb, 0, 0, tty_new, 12,
+                          0, 0, 0, 0);
         if ((status != SS$_NORMAL) || (iosb.iosb$w_value != SS$_NORMAL))
             return 0;
+    }
 #endif
     return 1;
 }
@@ -561,14 +575,15 @@ static int echo_console(UI *ui)
         return 0;
 #endif
 #ifdef OPENSSL_SYS_VMS
+    if (is_a_tty) {
         tty_new[0] = tty_orig[0];
         tty_new[1] = tty_orig[1] & ~TT$M_NOECHO;
         tty_new[2] = tty_orig[2];
-    status =
-        sys$qiow(0, channel, IO$_SETMODE, &iosb, 0, 0, tty_new, 12, 0, 0, 0,
-                 0);
+        status = sys$qiow(0, channel, IO$_SETMODE, &iosb, 0, 0, tty_new, 12,
+                          0, 0, 0, 0);
         if ((status != SS$_NORMAL) || (iosb.iosb$w_value != SS$_NORMAL))
             return 0;
+    }
 #endif
     return 1;
 }
@@ -581,6 +596,8 @@ static int close_console(UI *ui)
         fclose(tty_out);
 #ifdef OPENSSL_SYS_VMS
     status = sys$dassgn(channel);
+    if (status != SS$_NORMAL)
+        return 0;
 #endif
     CRYPTO_w_unlock(CRYPTO_LOCK_UI);
 

deps/openssl/openssl/demos/easy_tls/easy-tls.c

@@ -322,6 +322,7 @@ static void tls_errprintf(int flush, void *apparg, const char *fmt, ...)
         va_start(args, fmt);
         n = (sizeof errbuf) - errbuf_i;
         r = vsnprintf(errbuf + errbuf_i, n, fmt, args);
+        va_end(args);
         if (r >= n)
             r = n - 1;
         if (r >= 0) {

deps/openssl/openssl/doc/apps/ocsp.pod

@@ -26,6 +26,7 @@ B<openssl> B<ocsp>
 [B<-no_nonce>]
 [B<-url URL>]
 [B<-host host:n>]
+[B<-header name value>]
 [B<-path>]
 [B<-CApath dir>]
 [B<-CAfile file>]
@@ -135,6 +136,14 @@ if the B<host> option is present then the OCSP request is sent to the host
 B<hostname> on port B<port>. B<path> specifies the HTTP path name to use
 or "/" by default.
 
+=item B<-header name value>
+
+If sending a request to an OCSP server, then the specified header name and
+value are added to the HTTP request.  Note that the B<name> and B<value> must
+be specified as two separate parameters, not as a single quoted string, and
+that the header name does not have the trailing colon.
+Some OCSP responders require a Host header; use this flag to provide it.
+
 =item B<-timeout seconds>
 
 connection timeout to the OCSP responder in seconds

deps/openssl/openssl/doc/crypto/EVP_DigestSignInit.pod

@@ -10,7 +10,7 @@ EVP_DigestSignInit, EVP_DigestSignUpdate, EVP_DigestSignFinal - EVP signing func
 
  int EVP_DigestSignInit(EVP_MD_CTX *ctx, EVP_PKEY_CTX **pctx,
 			const EVP_MD *type, ENGINE *e, EVP_PKEY *pkey);
- int EVP_DigestSignUpdate(EVP_MD_CTX *ctx, const void *d, unsigned int cnt);
+ int EVP_DigestSignUpdate(EVP_MD_CTX *ctx, const void *d, size_t cnt);
  int EVP_DigestSignFinal(EVP_MD_CTX *ctx, unsigned char *sig, size_t *siglen);
 
 =head1 DESCRIPTION

deps/openssl/openssl/doc/crypto/EVP_DigestVerifyInit.pod

@@ -10,7 +10,7 @@ EVP_DigestVerifyInit, EVP_DigestVerifyUpdate, EVP_DigestVerifyFinal - EVP signat
 
  int EVP_DigestVerifyInit(EVP_MD_CTX *ctx, EVP_PKEY_CTX **pctx,
 			const EVP_MD *type, ENGINE *e, EVP_PKEY *pkey);
- int EVP_DigestVerifyUpdate(EVP_MD_CTX *ctx, const void *d, unsigned int cnt);
+ int EVP_DigestVerifyUpdate(EVP_MD_CTX *ctx, const void *d, size_t cnt);
  int EVP_DigestVerifyFinal(EVP_MD_CTX *ctx, const unsigned char *sig, size_t siglen);
 
 =head1 DESCRIPTION

deps/openssl/openssl/doc/crypto/RSA_generate_key.pod

@@ -52,7 +52,7 @@ it is called as B<BN_GENCB_call(cb, 3, 0)>.
 The process is then repeated for prime q with B<BN_GENCB_call(cb, 3, 1)>.
 
 RSA_generate_key is deprecated (new applications should use
-RSA_generate_key_ex instead). RSA_generate_key works in the same was as
+RSA_generate_key_ex instead). RSA_generate_key works in the same way as
 RSA_generate_key_ex except it uses "old style" call backs. See
 L<BN_generate_prime(3)|BN_generate_prime(3)> for further details.
 

deps/openssl/openssl/doc/crypto/X509_NAME_get_index_by_NID.pod

@@ -83,10 +83,9 @@ Process all entries:
 
 Process all commonName entries:
 
- int loc;
+ int lastpos = -1;
  X509_NAME_ENTRY *e;
 
- loc = -1;
  for (;;)
 	{
 	lastpos = X509_NAME_get_index_by_NID(nm, NID_commonName, lastpos);

deps/openssl/openssl/doc/crypto/X509_NAME_print_ex.pod

@@ -23,9 +23,11 @@ can be extensively customised by use of the B<flags> parameter.
 X509_NAME_print_ex_fp() is identical to X509_NAME_print_ex() except the output is
 written to FILE pointer B<fp>.
 
-X509_NAME_oneline() prints an ASCII version of B<a> to B<buf>. At most B<size>
-bytes will be written. If B<buf> is B<NULL> then a buffer is dynamically allocated
-and returned, otherwise B<buf> is returned.
+X509_NAME_oneline() prints an ASCII version of B<a> to B<buf>.
+If B<buf> is B<NULL> then a buffer is dynamically allocated and returned, and
+B<size> is ignored.
+Otherwise, at most B<size> bytes will be written, including the ending '\0',
+and B<buf> is returned.
 
 X509_NAME_print() prints out B<name> to B<bp> indenting each line by B<obase> 
 characters. Multiple lines are used if the output (including indent) exceeds

deps/openssl/openssl/doc/ssl/SSL_CTX_set_session_cache_mode.pod

@@ -30,7 +30,7 @@ server. It can only send exactly one id.  The server then either
 agrees to reuse the session or it starts a full handshake (to create a new
 session).
 
-A server will lookup up the session in its internal session storage. If the
+A server will look up the session in its internal session storage. If the
 session is not found in internal storage or lookups for the internal storage
 have been deactivated (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP), the server will try
 the external storage if available.

deps/openssl/openssl/doc/ssl/SSL_get_error.pod

@@ -38,12 +38,13 @@ if and only if B<ret E<gt> 0>.
 
 =item SSL_ERROR_ZERO_RETURN
 
-The TLS/SSL connection has been closed.  If the protocol version is SSL 3.0
-or TLS 1.0, this result code is returned only if a closure
-alert has occurred in the protocol, i.e. if the connection has been
-closed cleanly. Note that in this case B<SSL_ERROR_ZERO_RETURN>
-does not necessarily indicate that the underlying transport
-has been closed.
+The TLS/SSL connection has been closed.
+If the protocol version is SSL 3.0 or higher, this result code is returned only
+if a closure alert has occurred in the protocol, i.e. if the connection has been
+closed cleanly.
+Note that in this case B<SSL_ERROR_ZERO_RETURN> does not necessarily
+indicate that the underlying transport has been closed.
+
 
 =item SSL_ERROR_WANT_READ, SSL_ERROR_WANT_WRITE
 
@@ -89,12 +90,9 @@ Details depend on the application.
 
 =item SSL_ERROR_SYSCALL
 
-Some I/O error occurred.  The OpenSSL error queue may contain more
-information on the error.  If the error queue is empty
-(i.e. ERR_get_error() returns 0), B<ret> can be used to find out more
-about the error: If B<ret == 0>, an EOF was observed that violates
-the protocol.  If B<ret == -1>, the underlying B<BIO> reported an
-I/O error (for socket I/O on Unix systems, consult B<errno> for details).
+Some non-recoverable I/O error occurred.
+The OpenSSL error queue may contain more information on the error.
+For socket I/O on Unix systems, consult B<errno> for details.
 
 =item SSL_ERROR_SSL
 

deps/openssl/openssl/doc/ssl/SSL_read.pod

@@ -81,33 +81,29 @@ The following return values can occur:
 
 =over 4
 
-=item E<gt>0
+=item E<gt> 0
 
-The read operation was successful; the return value is the number of
-bytes actually read from the TLS/SSL connection.
+The read operation was successful.
+The return value is the number of bytes actually read from the TLS/SSL
+connection.
 
-=item Z<>0
+=item Z<><= 0
 
-The read operation was not successful. The reason may either be a clean
-shutdown due to a "close notify" alert sent by the peer (in which case
-the SSL_RECEIVED_SHUTDOWN flag in the ssl shutdown state is set
-(see L<SSL_shutdown(3)|SSL_shutdown(3)>,
-L<SSL_set_shutdown(3)|SSL_set_shutdown(3)>). It is also possible, that
-the peer simply shut down the underlying transport and the shutdown is
-incomplete. Call SSL_get_error() with the return value B<ret> to find out,
-whether an error occurred or the connection was shut down cleanly
-(SSL_ERROR_ZERO_RETURN).
+
+=item E<lt>0
+
+The read operation was not successful, because either the connection was closed,
+an error occurred or action must be taken by the calling process.
+Call L<SSL_get_error(3)> with the return value B<ret> to find out the reason.
 
 SSLv2 (deprecated) does not support a shutdown alert protocol, so it can
 only be detected, whether the underlying connection was closed. It cannot
 be checked, whether the closure was initiated by the peer or by something
 else.
 
-=item E<lt>0
-
-The read operation was not successful, because either an error occurred
-or action must be taken by the calling process. Call SSL_get_error() with the
-return value B<ret> to find out the reason.
+Old documentation indicated a difference between 0 and -1, and that -1 was
+retryable.
+You should instead call SSL_get_error() to find out if it's retryable.
 
 =back
 

deps/openssl/openssl/doc/ssl/SSL_write.pod

@@ -74,27 +74,24 @@ The following return values can occur:
 
 =over 4
 
-=item E<gt>0
+=item E<gt> 0
 
 The write operation was successful, the return value is the number of
 bytes actually written to the TLS/SSL connection.
 
-=item Z<>0
+=item Z<><= 0
 
-The write operation was not successful. Probably the underlying connection
-was closed. Call SSL_get_error() with the return value B<ret> to find out,
-whether an error occurred or the connection was shut down cleanly
-(SSL_ERROR_ZERO_RETURN).
+The write operation was not successful, because either the connection was
+closed, an error occurred or action must be taken by the calling process.
+Call SSL_get_error() with the return value B<ret> to find out the reason.
 
 SSLv2 (deprecated) does not support a shutdown alert protocol, so it can
 only be detected, whether the underlying connection was closed. It cannot
 be checked, why the closure happened.
 
-=item E<lt>0
-
-The write operation was not successful, because either an error occurred
-or action must be taken by the calling process. Call SSL_get_error() with the
-return value B<ret> to find out the reason.
+Old documentation indicated a difference between 0 and -1, and that -1 was
+retryable.
+You should instead call SSL_get_error() to find out if it's retryable.
 
 =back
 

deps/openssl/openssl/engines/ccgost/Makefile

@@ -32,7 +32,7 @@ lib: $(LIBOBJ)
 		$(MAKE) -f $(TOP)/Makefile.shared -e \
 			LIBNAME=$(LIBNAME) \
 			LIBEXTRAS='$(LIBOBJ)' \
-			LIBDEPS='-L$(TOP) -lcrypto' \
+			LIBDEPS='-L$(TOP) -lcrypto $(EX_LIBS)' \
 			link_o.$(SHLIB_TARGET); \
 	else \
 		$(AR) $(LIB) $(LIBOBJ); \

deps/openssl/openssl/include/openssl/aes.h

@@ -1,149 +0,0 @@
-/* crypto/aes/aes.h */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-
-#ifndef HEADER_AES_H
-# define HEADER_AES_H
-
-# include <openssl/opensslconf.h>
-
-# ifdef OPENSSL_NO_AES
-#  error AES is disabled.
-# endif
-
-# include <stddef.h>
-
-# define AES_ENCRYPT     1
-# define AES_DECRYPT     0
-
-/*
- * Because array size can't be a const in C, the following two are macros.
- * Both sizes are in bytes.
- */
-# define AES_MAXNR 14
-# define AES_BLOCK_SIZE 16
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* This should be a hidden type, but EVP requires that the size be known */
-struct aes_key_st {
-# ifdef AES_LONG
-    unsigned long rd_key[4 * (AES_MAXNR + 1)];
-# else
-    unsigned int rd_key[4 * (AES_MAXNR + 1)];
-# endif
-    int rounds;
-};
-typedef struct aes_key_st AES_KEY;
-
-const char *AES_options(void);
-
-int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
-                        AES_KEY *key);
-int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
-                        AES_KEY *key);
-
-int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits,
-                                AES_KEY *key);
-int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits,
-                                AES_KEY *key);
-
-void AES_encrypt(const unsigned char *in, unsigned char *out,
-                 const AES_KEY *key);
-void AES_decrypt(const unsigned char *in, unsigned char *out,
-                 const AES_KEY *key);
-
-void AES_ecb_encrypt(const unsigned char *in, unsigned char *out,
-                     const AES_KEY *key, const int enc);
-void AES_cbc_encrypt(const unsigned char *in, unsigned char *out,
-                     size_t length, const AES_KEY *key,
-                     unsigned char *ivec, const int enc);
-void AES_cfb128_encrypt(const unsigned char *in, unsigned char *out,
-                        size_t length, const AES_KEY *key,
-                        unsigned char *ivec, int *num, const int enc);
-void AES_cfb1_encrypt(const unsigned char *in, unsigned char *out,
-                      size_t length, const AES_KEY *key,
-                      unsigned char *ivec, int *num, const int enc);
-void AES_cfb8_encrypt(const unsigned char *in, unsigned char *out,
-                      size_t length, const AES_KEY *key,
-                      unsigned char *ivec, int *num, const int enc);
-void AES_ofb128_encrypt(const unsigned char *in, unsigned char *out,
-                        size_t length, const AES_KEY *key,
-                        unsigned char *ivec, int *num);
-void AES_ctr128_encrypt(const unsigned char *in, unsigned char *out,
-                        size_t length, const AES_KEY *key,
-                        unsigned char ivec[AES_BLOCK_SIZE],
-                        unsigned char ecount_buf[AES_BLOCK_SIZE],
-                        unsigned int *num);
-/* NB: the IV is _two_ blocks long */
-void AES_ige_encrypt(const unsigned char *in, unsigned char *out,
-                     size_t length, const AES_KEY *key,
-                     unsigned char *ivec, const int enc);
-/* NB: the IV is _four_ blocks long */
-void AES_bi_ige_encrypt(const unsigned char *in, unsigned char *out,
-                        size_t length, const AES_KEY *key,
-                        const AES_KEY *key2, const unsigned char *ivec,
-                        const int enc);
-
-int AES_wrap_key(AES_KEY *key, const unsigned char *iv,
-                 unsigned char *out,
-                 const unsigned char *in, unsigned int inlen);
-int AES_unwrap_key(AES_KEY *key, const unsigned char *iv,
-                   unsigned char *out,
-                   const unsigned char *in, unsigned int inlen);
-
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif                          /* !HEADER_AES_H */

deps/openssl/openssl/include/openssl/asn1_mac.h

@@ -1,579 +0,0 @@
-/* crypto/asn1/asn1_mac.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_ASN1_MAC_H
-# define HEADER_ASN1_MAC_H
-
-# include <openssl/asn1.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-# ifndef ASN1_MAC_ERR_LIB
-#  define ASN1_MAC_ERR_LIB        ERR_LIB_ASN1
-# endif
-
-# define ASN1_MAC_H_err(f,r,line) \
-        ERR_PUT_error(ASN1_MAC_ERR_LIB,(f),(r),__FILE__,(line))
-
-# define M_ASN1_D2I_vars(a,type,func) \
-        ASN1_const_CTX c; \
-        type ret=NULL; \
-        \
-        c.pp=(const unsigned char **)pp; \
-        c.q= *(const unsigned char **)pp; \
-        c.error=ERR_R_NESTED_ASN1_ERROR; \
-        if ((a == NULL) || ((*a) == NULL)) \
-                { if ((ret=(type)func()) == NULL) \
-                        { c.line=__LINE__; goto err; } } \
-        else    ret=(*a);
-
-# define M_ASN1_D2I_Init() \
-        c.p= *(const unsigned char **)pp; \
-        c.max=(length == 0)?0:(c.p+length);
-
-# define M_ASN1_D2I_Finish_2(a) \
-        if (!asn1_const_Finish(&c)) \
-                { c.line=__LINE__; goto err; } \
-        *(const unsigned char **)pp=c.p; \
-        if (a != NULL) (*a)=ret; \
-        return(ret);
-
-# define M_ASN1_D2I_Finish(a,func,e) \
-        M_ASN1_D2I_Finish_2(a); \
-err:\
-        ASN1_MAC_H_err((e),c.error,c.line); \
-        asn1_add_error(*(const unsigned char **)pp,(int)(c.q- *pp)); \
-        if ((ret != NULL) && ((a == NULL) || (*a != ret))) func(ret); \
-        return(NULL)
-
-# define M_ASN1_D2I_start_sequence() \
-        if (!asn1_GetSequence(&c,&length)) \
-                { c.line=__LINE__; goto err; }
-/* Begin reading ASN1 without a surrounding sequence */
-# define M_ASN1_D2I_begin() \
-        c.slen = length;
-
-/* End reading ASN1 with no check on length */
-# define M_ASN1_D2I_Finish_nolen(a, func, e) \
-        *pp=c.p; \
-        if (a != NULL) (*a)=ret; \
-        return(ret); \
-err:\
-        ASN1_MAC_H_err((e),c.error,c.line); \
-        asn1_add_error(*pp,(int)(c.q- *pp)); \
-        if ((ret != NULL) && ((a == NULL) || (*a != ret))) func(ret); \
-        return(NULL)
-
-# define M_ASN1_D2I_end_sequence() \
-        (((c.inf&1) == 0)?(c.slen <= 0): \
-                (c.eos=ASN1_const_check_infinite_end(&c.p,c.slen)))
-
-/* Don't use this with d2i_ASN1_BOOLEAN() */
-# define M_ASN1_D2I_get(b, func) \
-        c.q=c.p; \
-        if (func(&(b),&c.p,c.slen) == NULL) \
-                {c.line=__LINE__; goto err; } \
-        c.slen-=(c.p-c.q);
-
-/* Don't use this with d2i_ASN1_BOOLEAN() */
-# define M_ASN1_D2I_get_x(type,b,func) \
-        c.q=c.p; \
-        if (((D2I_OF(type))func)(&(b),&c.p,c.slen) == NULL) \
-                {c.line=__LINE__; goto err; } \
-        c.slen-=(c.p-c.q);
-
-/* use this instead () */
-# define M_ASN1_D2I_get_int(b,func) \
-        c.q=c.p; \
-        if (func(&(b),&c.p,c.slen) < 0) \
-                {c.line=__LINE__; goto err; } \
-        c.slen-=(c.p-c.q);
-
-# define M_ASN1_D2I_get_opt(b,func,type) \
-        if ((c.slen != 0) && ((M_ASN1_next & (~V_ASN1_CONSTRUCTED)) \
-                == (V_ASN1_UNIVERSAL|(type)))) \
-                { \
-                M_ASN1_D2I_get(b,func); \
-                }
-
-# define M_ASN1_D2I_get_int_opt(b,func,type) \
-        if ((c.slen != 0) && ((M_ASN1_next & (~V_ASN1_CONSTRUCTED)) \
-                == (V_ASN1_UNIVERSAL|(type)))) \
-                { \
-                M_ASN1_D2I_get_int(b,func); \
-                }
-
-# define M_ASN1_D2I_get_imp(b,func, type) \
-        M_ASN1_next=(_tmp& V_ASN1_CONSTRUCTED)|type; \
-        c.q=c.p; \
-        if (func(&(b),&c.p,c.slen) == NULL) \
-                {c.line=__LINE__; M_ASN1_next_prev = _tmp; goto err; } \
-        c.slen-=(c.p-c.q);\
-        M_ASN1_next_prev=_tmp;
-
-# define M_ASN1_D2I_get_IMP_opt(b,func,tag,type) \
-        if ((c.slen != 0) && ((M_ASN1_next & (~V_ASN1_CONSTRUCTED)) == \
-                (V_ASN1_CONTEXT_SPECIFIC|(tag)))) \
-                { \
-                unsigned char _tmp = M_ASN1_next; \
-                M_ASN1_D2I_get_imp(b,func, type);\
-                }
-
-# define M_ASN1_D2I_get_set(r,func,free_func) \
-                M_ASN1_D2I_get_imp_set(r,func,free_func, \
-                        V_ASN1_SET,V_ASN1_UNIVERSAL);
-
-# define M_ASN1_D2I_get_set_type(type,r,func,free_func) \
-                M_ASN1_D2I_get_imp_set_type(type,r,func,free_func, \
-                        V_ASN1_SET,V_ASN1_UNIVERSAL);
-
-# define M_ASN1_D2I_get_set_opt(r,func,free_func) \
-        if ((c.slen != 0) && (M_ASN1_next == (V_ASN1_UNIVERSAL| \
-                V_ASN1_CONSTRUCTED|V_ASN1_SET)))\
-                { M_ASN1_D2I_get_set(r,func,free_func); }
-
-# define M_ASN1_D2I_get_set_opt_type(type,r,func,free_func) \
-        if ((c.slen != 0) && (M_ASN1_next == (V_ASN1_UNIVERSAL| \
-                V_ASN1_CONSTRUCTED|V_ASN1_SET)))\
-                { M_ASN1_D2I_get_set_type(type,r,func,free_func); }
-
-# define M_ASN1_I2D_len_SET_opt(a,f) \
-        if ((a != NULL) && (sk_num(a) != 0)) \
-                M_ASN1_I2D_len_SET(a,f);
-
-# define M_ASN1_I2D_put_SET_opt(a,f) \
-        if ((a != NULL) && (sk_num(a) != 0)) \
-                M_ASN1_I2D_put_SET(a,f);
-
-# define M_ASN1_I2D_put_SEQUENCE_opt(a,f) \
-        if ((a != NULL) && (sk_num(a) != 0)) \
-                M_ASN1_I2D_put_SEQUENCE(a,f);
-
-# define M_ASN1_I2D_put_SEQUENCE_opt_type(type,a,f) \
-        if ((a != NULL) && (sk_##type##_num(a) != 0)) \
-                M_ASN1_I2D_put_SEQUENCE_type(type,a,f);
-
-# define M_ASN1_D2I_get_IMP_set_opt(b,func,free_func,tag) \
-        if ((c.slen != 0) && \
-                (M_ASN1_next == \
-                (V_ASN1_CONTEXT_SPECIFIC|V_ASN1_CONSTRUCTED|(tag))))\
-                { \
-                M_ASN1_D2I_get_imp_set(b,func,free_func,\
-                        tag,V_ASN1_CONTEXT_SPECIFIC); \
-                }
-
-# define M_ASN1_D2I_get_IMP_set_opt_type(type,b,func,free_func,tag) \
-        if ((c.slen != 0) && \
-                (M_ASN1_next == \
-                (V_ASN1_CONTEXT_SPECIFIC|V_ASN1_CONSTRUCTED|(tag))))\
-                { \
-                M_ASN1_D2I_get_imp_set_type(type,b,func,free_func,\
-                        tag,V_ASN1_CONTEXT_SPECIFIC); \
-                }
-
-# define M_ASN1_D2I_get_seq(r,func,free_func) \
-                M_ASN1_D2I_get_imp_set(r,func,free_func,\
-                        V_ASN1_SEQUENCE,V_ASN1_UNIVERSAL);
-
-# define M_ASN1_D2I_get_seq_type(type,r,func,free_func) \
-                M_ASN1_D2I_get_imp_set_type(type,r,func,free_func,\
-                                            V_ASN1_SEQUENCE,V_ASN1_UNIVERSAL)
-
-# define M_ASN1_D2I_get_seq_opt(r,func,free_func) \
-        if ((c.slen != 0) && (M_ASN1_next == (V_ASN1_UNIVERSAL| \
-                V_ASN1_CONSTRUCTED|V_ASN1_SEQUENCE)))\
-                { M_ASN1_D2I_get_seq(r,func,free_func); }
-
-# define M_ASN1_D2I_get_seq_opt_type(type,r,func,free_func) \
-        if ((c.slen != 0) && (M_ASN1_next == (V_ASN1_UNIVERSAL| \
-                V_ASN1_CONSTRUCTED|V_ASN1_SEQUENCE)))\
-                { M_ASN1_D2I_get_seq_type(type,r,func,free_func); }
-
-# define M_ASN1_D2I_get_IMP_set(r,func,free_func,x) \
-                M_ASN1_D2I_get_imp_set(r,func,free_func,\
-                        x,V_ASN1_CONTEXT_SPECIFIC);
-
-# define M_ASN1_D2I_get_IMP_set_type(type,r,func,free_func,x) \
-                M_ASN1_D2I_get_imp_set_type(type,r,func,free_func,\
-                        x,V_ASN1_CONTEXT_SPECIFIC);
-
-# define M_ASN1_D2I_get_imp_set(r,func,free_func,a,b) \
-        c.q=c.p; \
-        if (d2i_ASN1_SET(&(r),&c.p,c.slen,(char *(*)())func,\
-                (void (*)())free_func,a,b) == NULL) \
-                { c.line=__LINE__; goto err; } \
-        c.slen-=(c.p-c.q);
-
-# define M_ASN1_D2I_get_imp_set_type(type,r,func,free_func,a,b) \
-        c.q=c.p; \
-        if (d2i_ASN1_SET_OF_##type(&(r),&c.p,c.slen,func,\
-                                   free_func,a,b) == NULL) \
-                { c.line=__LINE__; goto err; } \
-        c.slen-=(c.p-c.q);
-
-# define M_ASN1_D2I_get_set_strings(r,func,a,b) \
-        c.q=c.p; \
-        if (d2i_ASN1_STRING_SET(&(r),&c.p,c.slen,a,b) == NULL) \
-                { c.line=__LINE__; goto err; } \
-        c.slen-=(c.p-c.q);
-
-# define M_ASN1_D2I_get_EXP_opt(r,func,tag) \
-        if ((c.slen != 0L) && (M_ASN1_next == \
-                (V_ASN1_CONSTRUCTED|V_ASN1_CONTEXT_SPECIFIC|tag))) \
-                { \
-                int Tinf,Ttag,Tclass; \
-                long Tlen; \
-                \
-                c.q=c.p; \
-                Tinf=ASN1_get_object(&c.p,&Tlen,&Ttag,&Tclass,c.slen); \
-                if (Tinf & 0x80) \
-                        { c.error=ERR_R_BAD_ASN1_OBJECT_HEADER; \
-                        c.line=__LINE__; goto err; } \
-                if (Tinf == (V_ASN1_CONSTRUCTED+1)) \
-                                        Tlen = c.slen - (c.p - c.q) - 2; \
-                if (func(&(r),&c.p,Tlen) == NULL) \
-                        { c.line=__LINE__; goto err; } \
-                if (Tinf == (V_ASN1_CONSTRUCTED+1)) { \
-                        Tlen = c.slen - (c.p - c.q); \
-                        if(!ASN1_const_check_infinite_end(&c.p, Tlen)) \
-                                { c.error=ERR_R_MISSING_ASN1_EOS; \
-                                c.line=__LINE__; goto err; } \
-                }\
-                c.slen-=(c.p-c.q); \
-                }
-
-# define M_ASN1_D2I_get_EXP_set_opt(r,func,free_func,tag,b) \
-        if ((c.slen != 0) && (M_ASN1_next == \
-                (V_ASN1_CONSTRUCTED|V_ASN1_CONTEXT_SPECIFIC|tag))) \
-                { \
-                int Tinf,Ttag,Tclass; \
-                long Tlen; \
-                \
-                c.q=c.p; \
-                Tinf=ASN1_get_object(&c.p,&Tlen,&Ttag,&Tclass,c.slen); \
-                if (Tinf & 0x80) \
-                        { c.error=ERR_R_BAD_ASN1_OBJECT_HEADER; \
-                        c.line=__LINE__; goto err; } \
-                if (Tinf == (V_ASN1_CONSTRUCTED+1)) \
-                                        Tlen = c.slen - (c.p - c.q) - 2; \
-                if (d2i_ASN1_SET(&(r),&c.p,Tlen,(char *(*)())func, \
-                        (void (*)())free_func, \
-                        b,V_ASN1_UNIVERSAL) == NULL) \
-                        { c.line=__LINE__; goto err; } \
-                if (Tinf == (V_ASN1_CONSTRUCTED+1)) { \
-                        Tlen = c.slen - (c.p - c.q); \
-                        if(!ASN1_check_infinite_end(&c.p, Tlen)) \
-                                { c.error=ERR_R_MISSING_ASN1_EOS; \
-                                c.line=__LINE__; goto err; } \
-                }\
-                c.slen-=(c.p-c.q); \
-                }
-
-# define M_ASN1_D2I_get_EXP_set_opt_type(type,r,func,free_func,tag,b) \
-        if ((c.slen != 0) && (M_ASN1_next == \
-                (V_ASN1_CONSTRUCTED|V_ASN1_CONTEXT_SPECIFIC|tag))) \
-                { \
-                int Tinf,Ttag,Tclass; \
-                long Tlen; \
-                \
-                c.q=c.p; \
-                Tinf=ASN1_get_object(&c.p,&Tlen,&Ttag,&Tclass,c.slen); \
-                if (Tinf & 0x80) \
-                        { c.error=ERR_R_BAD_ASN1_OBJECT_HEADER; \
-                        c.line=__LINE__; goto err; } \
-                if (Tinf == (V_ASN1_CONSTRUCTED+1)) \
-                                        Tlen = c.slen - (c.p - c.q) - 2; \
-                if (d2i_ASN1_SET_OF_##type(&(r),&c.p,Tlen,func, \
-                        free_func,b,V_ASN1_UNIVERSAL) == NULL) \
-                        { c.line=__LINE__; goto err; } \
-                if (Tinf == (V_ASN1_CONSTRUCTED+1)) { \
-                        Tlen = c.slen - (c.p - c.q); \
-                        if(!ASN1_check_infinite_end(&c.p, Tlen)) \
-                                { c.error=ERR_R_MISSING_ASN1_EOS; \
-                                c.line=__LINE__; goto err; } \
-                }\
-                c.slen-=(c.p-c.q); \
-                }
-
-/* New macros */
-# define M_ASN1_New_Malloc(ret,type) \
-        if ((ret=(type *)OPENSSL_malloc(sizeof(type))) == NULL) \
-                { c.line=__LINE__; goto err2; }
-
-# define M_ASN1_New(arg,func) \
-        if (((arg)=func()) == NULL) return(NULL)
-
-# define M_ASN1_New_Error(a) \
-/*-     err:    ASN1_MAC_H_err((a),ERR_R_NESTED_ASN1_ERROR,c.line); \
-                return(NULL);*/ \
-        err2:   ASN1_MAC_H_err((a),ERR_R_MALLOC_FAILURE,c.line); \
-                return(NULL)
-
-/*
- * BIG UGLY WARNING! This is so damn ugly I wanna puke.  Unfortunately, some
- * macros that use ASN1_const_CTX still insist on writing in the input
- * stream.  ARGH! ARGH! ARGH! Let's get rid of this macro package. Please? --
- * Richard Levitte
- */
-# define M_ASN1_next             (*((unsigned char *)(c.p)))
-# define M_ASN1_next_prev        (*((unsigned char *)(c.q)))
-
-/*************************************************/
-
-# define M_ASN1_I2D_vars(a)      int r=0,ret=0; \
-                                unsigned char *p; \
-                                if (a == NULL) return(0)
-
-/* Length Macros */
-# define M_ASN1_I2D_len(a,f)     ret+=f(a,NULL)
-# define M_ASN1_I2D_len_IMP_opt(a,f)     if (a != NULL) M_ASN1_I2D_len(a,f)
-
-# define M_ASN1_I2D_len_SET(a,f) \
-                ret+=i2d_ASN1_SET(a,NULL,f,V_ASN1_SET,V_ASN1_UNIVERSAL,IS_SET);
-
-# define M_ASN1_I2D_len_SET_type(type,a,f) \
-                ret+=i2d_ASN1_SET_OF_##type(a,NULL,f,V_ASN1_SET, \
-                                            V_ASN1_UNIVERSAL,IS_SET);
-
-# define M_ASN1_I2D_len_SEQUENCE(a,f) \
-                ret+=i2d_ASN1_SET(a,NULL,f,V_ASN1_SEQUENCE,V_ASN1_UNIVERSAL, \
-                                  IS_SEQUENCE);
-
-# define M_ASN1_I2D_len_SEQUENCE_type(type,a,f) \
-                ret+=i2d_ASN1_SET_OF_##type(a,NULL,f,V_ASN1_SEQUENCE, \
-                                            V_ASN1_UNIVERSAL,IS_SEQUENCE)
-
-# define M_ASN1_I2D_len_SEQUENCE_opt(a,f) \
-                if ((a != NULL) && (sk_num(a) != 0)) \
-                        M_ASN1_I2D_len_SEQUENCE(a,f);
-
-# define M_ASN1_I2D_len_SEQUENCE_opt_type(type,a,f) \
-                if ((a != NULL) && (sk_##type##_num(a) != 0)) \
-                        M_ASN1_I2D_len_SEQUENCE_type(type,a,f);
-
-# define M_ASN1_I2D_len_IMP_SET(a,f,x) \
-                ret+=i2d_ASN1_SET(a,NULL,f,x,V_ASN1_CONTEXT_SPECIFIC,IS_SET);
-
-# define M_ASN1_I2D_len_IMP_SET_type(type,a,f,x) \
-                ret+=i2d_ASN1_SET_OF_##type(a,NULL,f,x, \
-                                            V_ASN1_CONTEXT_SPECIFIC,IS_SET);
-
-# define M_ASN1_I2D_len_IMP_SET_opt(a,f,x) \
-                if ((a != NULL) && (sk_num(a) != 0)) \
-                        ret+=i2d_ASN1_SET(a,NULL,f,x,V_ASN1_CONTEXT_SPECIFIC, \
-                                          IS_SET);
-
-# define M_ASN1_I2D_len_IMP_SET_opt_type(type,a,f,x) \
-                if ((a != NULL) && (sk_##type##_num(a) != 0)) \
-                        ret+=i2d_ASN1_SET_OF_##type(a,NULL,f,x, \
-                                               V_ASN1_CONTEXT_SPECIFIC,IS_SET);
-
-# define M_ASN1_I2D_len_IMP_SEQUENCE(a,f,x) \
-                ret+=i2d_ASN1_SET(a,NULL,f,x,V_ASN1_CONTEXT_SPECIFIC, \
-                                  IS_SEQUENCE);
-
-# define M_ASN1_I2D_len_IMP_SEQUENCE_opt(a,f,x) \
-                if ((a != NULL) && (sk_num(a) != 0)) \
-                        ret+=i2d_ASN1_SET(a,NULL,f,x,V_ASN1_CONTEXT_SPECIFIC, \
-                                          IS_SEQUENCE);
-
-# define M_ASN1_I2D_len_IMP_SEQUENCE_opt_type(type,a,f,x) \
-                if ((a != NULL) && (sk_##type##_num(a) != 0)) \
-                        ret+=i2d_ASN1_SET_OF_##type(a,NULL,f,x, \
-                                                    V_ASN1_CONTEXT_SPECIFIC, \
-                                                    IS_SEQUENCE);
-
-# define M_ASN1_I2D_len_EXP_opt(a,f,mtag,v) \
-                if (a != NULL)\
-                        { \
-                        v=f(a,NULL); \
-                        ret+=ASN1_object_size(1,v,mtag); \
-                        }
-
-# define M_ASN1_I2D_len_EXP_SET_opt(a,f,mtag,tag,v) \
-                if ((a != NULL) && (sk_num(a) != 0))\
-                        { \
-                        v=i2d_ASN1_SET(a,NULL,f,tag,V_ASN1_UNIVERSAL,IS_SET); \
-                        ret+=ASN1_object_size(1,v,mtag); \
-                        }
-
-# define M_ASN1_I2D_len_EXP_SEQUENCE_opt(a,f,mtag,tag,v) \
-                if ((a != NULL) && (sk_num(a) != 0))\
-                        { \
-                        v=i2d_ASN1_SET(a,NULL,f,tag,V_ASN1_UNIVERSAL, \
-                                       IS_SEQUENCE); \
-                        ret+=ASN1_object_size(1,v,mtag); \
-                        }
-
-# define M_ASN1_I2D_len_EXP_SEQUENCE_opt_type(type,a,f,mtag,tag,v) \
-                if ((a != NULL) && (sk_##type##_num(a) != 0))\
-                        { \
-                        v=i2d_ASN1_SET_OF_##type(a,NULL,f,tag, \
-                                                 V_ASN1_UNIVERSAL, \
-                                                 IS_SEQUENCE); \
-                        ret+=ASN1_object_size(1,v,mtag); \
-                        }
-
-/* Put Macros */
-# define M_ASN1_I2D_put(a,f)     f(a,&p)
-
-# define M_ASN1_I2D_put_IMP_opt(a,f,t)   \
-                if (a != NULL) \
-                        { \
-                        unsigned char *q=p; \
-                        f(a,&p); \
-                        *q=(V_ASN1_CONTEXT_SPECIFIC|t|(*q&V_ASN1_CONSTRUCTED));\
-                        }
-
-# define M_ASN1_I2D_put_SET(a,f) i2d_ASN1_SET(a,&p,f,V_ASN1_SET,\
-                        V_ASN1_UNIVERSAL,IS_SET)
-# define M_ASN1_I2D_put_SET_type(type,a,f) \
-     i2d_ASN1_SET_OF_##type(a,&p,f,V_ASN1_SET,V_ASN1_UNIVERSAL,IS_SET)
-# define M_ASN1_I2D_put_IMP_SET(a,f,x) i2d_ASN1_SET(a,&p,f,x,\
-                        V_ASN1_CONTEXT_SPECIFIC,IS_SET)
-# define M_ASN1_I2D_put_IMP_SET_type(type,a,f,x) \
-     i2d_ASN1_SET_OF_##type(a,&p,f,x,V_ASN1_CONTEXT_SPECIFIC,IS_SET)
-# define M_ASN1_I2D_put_IMP_SEQUENCE(a,f,x) i2d_ASN1_SET(a,&p,f,x,\
-                        V_ASN1_CONTEXT_SPECIFIC,IS_SEQUENCE)
-
-# define M_ASN1_I2D_put_SEQUENCE(a,f) i2d_ASN1_SET(a,&p,f,V_ASN1_SEQUENCE,\
-                                             V_ASN1_UNIVERSAL,IS_SEQUENCE)
-
-# define M_ASN1_I2D_put_SEQUENCE_type(type,a,f) \
-     i2d_ASN1_SET_OF_##type(a,&p,f,V_ASN1_SEQUENCE,V_ASN1_UNIVERSAL, \
-                            IS_SEQUENCE)
-
-# define M_ASN1_I2D_put_SEQUENCE_opt(a,f) \
-                if ((a != NULL) && (sk_num(a) != 0)) \
-                        M_ASN1_I2D_put_SEQUENCE(a,f);
-
-# define M_ASN1_I2D_put_IMP_SET_opt(a,f,x) \
-                if ((a != NULL) && (sk_num(a) != 0)) \
-                        { i2d_ASN1_SET(a,&p,f,x,V_ASN1_CONTEXT_SPECIFIC, \
-                                       IS_SET); }
-
-# define M_ASN1_I2D_put_IMP_SET_opt_type(type,a,f,x) \
-                if ((a != NULL) && (sk_##type##_num(a) != 0)) \
-                        { i2d_ASN1_SET_OF_##type(a,&p,f,x, \
-                                                 V_ASN1_CONTEXT_SPECIFIC, \
-                                                 IS_SET); }
-
-# define M_ASN1_I2D_put_IMP_SEQUENCE_opt(a,f,x) \
-                if ((a != NULL) && (sk_num(a) != 0)) \
-                        { i2d_ASN1_SET(a,&p,f,x,V_ASN1_CONTEXT_SPECIFIC, \
-                                       IS_SEQUENCE); }
-
-# define M_ASN1_I2D_put_IMP_SEQUENCE_opt_type(type,a,f,x) \
-                if ((a != NULL) && (sk_##type##_num(a) != 0)) \
-                        { i2d_ASN1_SET_OF_##type(a,&p,f,x, \
-                                                 V_ASN1_CONTEXT_SPECIFIC, \
-                                                 IS_SEQUENCE); }
-
-# define M_ASN1_I2D_put_EXP_opt(a,f,tag,v) \
-                if (a != NULL) \
-                        { \
-                        ASN1_put_object(&p,1,v,tag,V_ASN1_CONTEXT_SPECIFIC); \
-                        f(a,&p); \
-                        }
-
-# define M_ASN1_I2D_put_EXP_SET_opt(a,f,mtag,tag,v) \
-                if ((a != NULL) && (sk_num(a) != 0)) \
-                        { \
-                        ASN1_put_object(&p,1,v,mtag,V_ASN1_CONTEXT_SPECIFIC); \
-                        i2d_ASN1_SET(a,&p,f,tag,V_ASN1_UNIVERSAL,IS_SET); \
-                        }
-
-# define M_ASN1_I2D_put_EXP_SEQUENCE_opt(a,f,mtag,tag,v) \
-                if ((a != NULL) && (sk_num(a) != 0)) \
-                        { \
-                        ASN1_put_object(&p,1,v,mtag,V_ASN1_CONTEXT_SPECIFIC); \
-                        i2d_ASN1_SET(a,&p,f,tag,V_ASN1_UNIVERSAL,IS_SEQUENCE); \
-                        }
-
-# define M_ASN1_I2D_put_EXP_SEQUENCE_opt_type(type,a,f,mtag,tag,v) \
-                if ((a != NULL) && (sk_##type##_num(a) != 0)) \
-                        { \
-                        ASN1_put_object(&p,1,v,mtag,V_ASN1_CONTEXT_SPECIFIC); \
-                        i2d_ASN1_SET_OF_##type(a,&p,f,tag,V_ASN1_UNIVERSAL, \
-                                               IS_SEQUENCE); \
-                        }
-
-# define M_ASN1_I2D_seq_total() \
-                r=ASN1_object_size(1,ret,V_ASN1_SEQUENCE); \
-                if (pp == NULL) return(r); \
-                p= *pp; \
-                ASN1_put_object(&p,1,ret,V_ASN1_SEQUENCE,V_ASN1_UNIVERSAL)
-
-# define M_ASN1_I2D_INF_seq_start(tag,ctx) \
-                *(p++)=(V_ASN1_CONSTRUCTED|(tag)|(ctx)); \
-                *(p++)=0x80
-
-# define M_ASN1_I2D_INF_seq_end() *(p++)=0x00; *(p++)=0x00
-
-# define M_ASN1_I2D_finish()     *pp=p; \
-                                return(r);
-
-int asn1_GetSequence(ASN1_const_CTX *c, long *length);
-void asn1_add_error(const unsigned char *address, int offset);
-#ifdef  __cplusplus
-}
-#endif
-
-#endif

deps/openssl/openssl/include/openssl/asn1t.h

@@ -1,973 +0,0 @@
-/* asn1t.h */
-/*
- * Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL project
- * 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-#ifndef HEADER_ASN1T_H
-# define HEADER_ASN1T_H
-
-# include <stddef.h>
-# include <openssl/e_os2.h>
-# include <openssl/asn1.h>
-
-# ifdef OPENSSL_BUILD_SHLIBCRYPTO
-#  undef OPENSSL_EXTERN
-#  define OPENSSL_EXTERN OPENSSL_EXPORT
-# endif
-
-/* ASN1 template defines, structures and functions */
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-# ifndef OPENSSL_EXPORT_VAR_AS_FUNCTION
-
-/* Macro to obtain ASN1_ADB pointer from a type (only used internally) */
-#  define ASN1_ADB_ptr(iptr) ((const ASN1_ADB *)(iptr))
-
-/* Macros for start and end of ASN1_ITEM definition */
-
-#  define ASN1_ITEM_start(itname) \
-        OPENSSL_GLOBAL const ASN1_ITEM itname##_it = {
-
-#  define ASN1_ITEM_end(itname) \
-                };
-
-# else
-
-/* Macro to obtain ASN1_ADB pointer from a type (only used internally) */
-#  define ASN1_ADB_ptr(iptr) ((const ASN1_ADB *)(iptr()))
-
-/* Macros for start and end of ASN1_ITEM definition */
-
-#  define ASN1_ITEM_start(itname) \
-        const ASN1_ITEM * itname##_it(void) \
-        { \
-                static const ASN1_ITEM local_it = {
-
-#  define ASN1_ITEM_end(itname) \
-                }; \
-        return &local_it; \
-        }
-
-# endif
-
-/* Macros to aid ASN1 template writing */
-
-# define ASN1_ITEM_TEMPLATE(tname) \
-        static const ASN1_TEMPLATE tname##_item_tt
-
-# define ASN1_ITEM_TEMPLATE_END(tname) \
-        ;\
-        ASN1_ITEM_start(tname) \
-                ASN1_ITYPE_PRIMITIVE,\
-                -1,\
-                &tname##_item_tt,\
-                0,\
-                NULL,\
-                0,\
-                #tname \
-        ASN1_ITEM_end(tname)
-
-/* This is a ASN1 type which just embeds a template */
-
-/*-
- * This pair helps declare a SEQUENCE. We can do:
- *
- *      ASN1_SEQUENCE(stname) = {
- *              ... SEQUENCE components ...
- *      } ASN1_SEQUENCE_END(stname)
- *
- *      This will produce an ASN1_ITEM called stname_it
- *      for a structure called stname.
- *
- *      If you want the same structure but a different
- *      name then use:
- *
- *      ASN1_SEQUENCE(itname) = {
- *              ... SEQUENCE components ...
- *      } ASN1_SEQUENCE_END_name(stname, itname)
- *
- *      This will create an item called itname_it using
- *      a structure called stname.
- */
-
-# define ASN1_SEQUENCE(tname) \
-        static const ASN1_TEMPLATE tname##_seq_tt[]
-
-# define ASN1_SEQUENCE_END(stname) ASN1_SEQUENCE_END_name(stname, stname)
-
-# define ASN1_SEQUENCE_END_name(stname, tname) \
-        ;\
-        ASN1_ITEM_start(tname) \
-                ASN1_ITYPE_SEQUENCE,\
-                V_ASN1_SEQUENCE,\
-                tname##_seq_tt,\
-                sizeof(tname##_seq_tt) / sizeof(ASN1_TEMPLATE),\
-                NULL,\
-                sizeof(stname),\
-                #stname \
-        ASN1_ITEM_end(tname)
-
-# define ASN1_NDEF_SEQUENCE(tname) \
-        ASN1_SEQUENCE(tname)
-
-# define ASN1_NDEF_SEQUENCE_cb(tname, cb) \
-        ASN1_SEQUENCE_cb(tname, cb)
-
-# define ASN1_SEQUENCE_cb(tname, cb) \
-        static const ASN1_AUX tname##_aux = {NULL, 0, 0, 0, cb, 0}; \
-        ASN1_SEQUENCE(tname)
-
-# define ASN1_BROKEN_SEQUENCE(tname) \
-        static const ASN1_AUX tname##_aux = {NULL, ASN1_AFLG_BROKEN, 0, 0, 0, 0}; \
-        ASN1_SEQUENCE(tname)
-
-# define ASN1_SEQUENCE_ref(tname, cb, lck) \
-        static const ASN1_AUX tname##_aux = {NULL, ASN1_AFLG_REFCOUNT, offsetof(tname, references), lck, cb, 0}; \
-        ASN1_SEQUENCE(tname)
-
-# define ASN1_SEQUENCE_enc(tname, enc, cb) \
-        static const ASN1_AUX tname##_aux = {NULL, ASN1_AFLG_ENCODING, 0, 0, cb, offsetof(tname, enc)}; \
-        ASN1_SEQUENCE(tname)
-
-# define ASN1_NDEF_SEQUENCE_END(tname) \
-        ;\
-        ASN1_ITEM_start(tname) \
-                ASN1_ITYPE_NDEF_SEQUENCE,\
-                V_ASN1_SEQUENCE,\
-                tname##_seq_tt,\
-                sizeof(tname##_seq_tt) / sizeof(ASN1_TEMPLATE),\
-                NULL,\
-                sizeof(tname),\
-                #tname \
-        ASN1_ITEM_end(tname)
-
-# define ASN1_BROKEN_SEQUENCE_END(stname) ASN1_SEQUENCE_END_ref(stname, stname)
-
-# define ASN1_SEQUENCE_END_enc(stname, tname) ASN1_SEQUENCE_END_ref(stname, tname)
-
-# define ASN1_SEQUENCE_END_cb(stname, tname) ASN1_SEQUENCE_END_ref(stname, tname)
-
-# define ASN1_SEQUENCE_END_ref(stname, tname) \
-        ;\
-        ASN1_ITEM_start(tname) \
-                ASN1_ITYPE_SEQUENCE,\
-                V_ASN1_SEQUENCE,\
-                tname##_seq_tt,\
-                sizeof(tname##_seq_tt) / sizeof(ASN1_TEMPLATE),\
-                &tname##_aux,\
-                sizeof(stname),\
-                #stname \
-        ASN1_ITEM_end(tname)
-
-# define ASN1_NDEF_SEQUENCE_END_cb(stname, tname) \
-        ;\
-        ASN1_ITEM_start(tname) \
-                ASN1_ITYPE_NDEF_SEQUENCE,\
-                V_ASN1_SEQUENCE,\
-                tname##_seq_tt,\
-                sizeof(tname##_seq_tt) / sizeof(ASN1_TEMPLATE),\
-                &tname##_aux,\
-                sizeof(stname),\
-                #stname \
-        ASN1_ITEM_end(tname)
-
-/*-
- * This pair helps declare a CHOICE type. We can do:
- *
- *      ASN1_CHOICE(chname) = {
- *              ... CHOICE options ...
- *      ASN1_CHOICE_END(chname)
- *
- *      This will produce an ASN1_ITEM called chname_it
- *      for a structure called chname. The structure
- *      definition must look like this:
- *      typedef struct {
- *              int type;
- *              union {
- *                      ASN1_SOMETHING *opt1;
- *                      ASN1_SOMEOTHER *opt2;
- *              } value;
- *      } chname;
- *
- *      the name of the selector must be 'type'.
- *      to use an alternative selector name use the
- *      ASN1_CHOICE_END_selector() version.
- */
-
-# define ASN1_CHOICE(tname) \
-        static const ASN1_TEMPLATE tname##_ch_tt[]
-
-# define ASN1_CHOICE_cb(tname, cb) \
-        static const ASN1_AUX tname##_aux = {NULL, 0, 0, 0, cb, 0}; \
-        ASN1_CHOICE(tname)
-
-# define ASN1_CHOICE_END(stname) ASN1_CHOICE_END_name(stname, stname)
-
-# define ASN1_CHOICE_END_name(stname, tname) ASN1_CHOICE_END_selector(stname, tname, type)
-
-# define ASN1_CHOICE_END_selector(stname, tname, selname) \
-        ;\
-        ASN1_ITEM_start(tname) \
-                ASN1_ITYPE_CHOICE,\
-                offsetof(stname,selname) ,\
-                tname##_ch_tt,\
-                sizeof(tname##_ch_tt) / sizeof(ASN1_TEMPLATE),\
-                NULL,\
-                sizeof(stname),\
-                #stname \
-        ASN1_ITEM_end(tname)
-
-# define ASN1_CHOICE_END_cb(stname, tname, selname) \
-        ;\
-        ASN1_ITEM_start(tname) \
-                ASN1_ITYPE_CHOICE,\
-                offsetof(stname,selname) ,\
-                tname##_ch_tt,\
-                sizeof(tname##_ch_tt) / sizeof(ASN1_TEMPLATE),\
-                &tname##_aux,\
-                sizeof(stname),\
-                #stname \
-        ASN1_ITEM_end(tname)
-
-/* This helps with the template wrapper form of ASN1_ITEM */
-
-# define ASN1_EX_TEMPLATE_TYPE(flags, tag, name, type) { \
-        (flags), (tag), 0,\
-        #name, ASN1_ITEM_ref(type) }
-
-/* These help with SEQUENCE or CHOICE components */
-
-/* used to declare other types */
-
-# define ASN1_EX_TYPE(flags, tag, stname, field, type) { \
-        (flags), (tag), offsetof(stname, field),\
-        #field, ASN1_ITEM_ref(type) }
-
-/* used when the structure is combined with the parent */
-
-# define ASN1_EX_COMBINE(flags, tag, type) { \
-        (flags)|ASN1_TFLG_COMBINE, (tag), 0, NULL, ASN1_ITEM_ref(type) }
-
-/* implicit and explicit helper macros */
-
-# define ASN1_IMP_EX(stname, field, type, tag, ex) \
-                ASN1_EX_TYPE(ASN1_TFLG_IMPLICIT | ex, tag, stname, field, type)
-
-# define ASN1_EXP_EX(stname, field, type, tag, ex) \
-                ASN1_EX_TYPE(ASN1_TFLG_EXPLICIT | ex, tag, stname, field, type)
-
-/* Any defined by macros: the field used is in the table itself */
-
-# ifndef OPENSSL_EXPORT_VAR_AS_FUNCTION
-#  define ASN1_ADB_OBJECT(tblname) { ASN1_TFLG_ADB_OID, -1, 0, #tblname, (const ASN1_ITEM *)&(tblname##_adb) }
-#  define ASN1_ADB_INTEGER(tblname) { ASN1_TFLG_ADB_INT, -1, 0, #tblname, (const ASN1_ITEM *)&(tblname##_adb) }
-# else
-#  define ASN1_ADB_OBJECT(tblname) { ASN1_TFLG_ADB_OID, -1, 0, #tblname, tblname##_adb }
-#  define ASN1_ADB_INTEGER(tblname) { ASN1_TFLG_ADB_INT, -1, 0, #tblname, tblname##_adb }
-# endif
-/* Plain simple type */
-# define ASN1_SIMPLE(stname, field, type) ASN1_EX_TYPE(0,0, stname, field, type)
-
-/* OPTIONAL simple type */
-# define ASN1_OPT(stname, field, type) ASN1_EX_TYPE(ASN1_TFLG_OPTIONAL, 0, stname, field, type)
-
-/* IMPLICIT tagged simple type */
-# define ASN1_IMP(stname, field, type, tag) ASN1_IMP_EX(stname, field, type, tag, 0)
-
-/* IMPLICIT tagged OPTIONAL simple type */
-# define ASN1_IMP_OPT(stname, field, type, tag) ASN1_IMP_EX(stname, field, type, tag, ASN1_TFLG_OPTIONAL)
-
-/* Same as above but EXPLICIT */
-
-# define ASN1_EXP(stname, field, type, tag) ASN1_EXP_EX(stname, field, type, tag, 0)
-# define ASN1_EXP_OPT(stname, field, type, tag) ASN1_EXP_EX(stname, field, type, tag, ASN1_TFLG_OPTIONAL)
-
-/* SEQUENCE OF type */
-# define ASN1_SEQUENCE_OF(stname, field, type) \
-                ASN1_EX_TYPE(ASN1_TFLG_SEQUENCE_OF, 0, stname, field, type)
-
-/* OPTIONAL SEQUENCE OF */
-# define ASN1_SEQUENCE_OF_OPT(stname, field, type) \
-                ASN1_EX_TYPE(ASN1_TFLG_SEQUENCE_OF|ASN1_TFLG_OPTIONAL, 0, stname, field, type)
-
-/* Same as above but for SET OF */
-
-# define ASN1_SET_OF(stname, field, type) \
-                ASN1_EX_TYPE(ASN1_TFLG_SET_OF, 0, stname, field, type)
-
-# define ASN1_SET_OF_OPT(stname, field, type) \
-                ASN1_EX_TYPE(ASN1_TFLG_SET_OF|ASN1_TFLG_OPTIONAL, 0, stname, field, type)
-
-/* Finally compound types of SEQUENCE, SET, IMPLICIT, EXPLICIT and OPTIONAL */
-
-# define ASN1_IMP_SET_OF(stname, field, type, tag) \
-                        ASN1_IMP_EX(stname, field, type, tag, ASN1_TFLG_SET_OF)
-
-# define ASN1_EXP_SET_OF(stname, field, type, tag) \
-                        ASN1_EXP_EX(stname, field, type, tag, ASN1_TFLG_SET_OF)
-
-# define ASN1_IMP_SET_OF_OPT(stname, field, type, tag) \
-                        ASN1_IMP_EX(stname, field, type, tag, ASN1_TFLG_SET_OF|ASN1_TFLG_OPTIONAL)
-
-# define ASN1_EXP_SET_OF_OPT(stname, field, type, tag) \
-                        ASN1_EXP_EX(stname, field, type, tag, ASN1_TFLG_SET_OF|ASN1_TFLG_OPTIONAL)
-
-# define ASN1_IMP_SEQUENCE_OF(stname, field, type, tag) \
-                        ASN1_IMP_EX(stname, field, type, tag, ASN1_TFLG_SEQUENCE_OF)
-
-# define ASN1_IMP_SEQUENCE_OF_OPT(stname, field, type, tag) \
-                        ASN1_IMP_EX(stname, field, type, tag, ASN1_TFLG_SEQUENCE_OF|ASN1_TFLG_OPTIONAL)
-
-# define ASN1_EXP_SEQUENCE_OF(stname, field, type, tag) \
-                        ASN1_EXP_EX(stname, field, type, tag, ASN1_TFLG_SEQUENCE_OF)
-
-# define ASN1_EXP_SEQUENCE_OF_OPT(stname, field, type, tag) \
-                        ASN1_EXP_EX(stname, field, type, tag, ASN1_TFLG_SEQUENCE_OF|ASN1_TFLG_OPTIONAL)
-
-/* EXPLICIT using indefinite length constructed form */
-# define ASN1_NDEF_EXP(stname, field, type, tag) \
-                        ASN1_EXP_EX(stname, field, type, tag, ASN1_TFLG_NDEF)
-
-/* EXPLICIT OPTIONAL using indefinite length constructed form */
-# define ASN1_NDEF_EXP_OPT(stname, field, type, tag) \
-                        ASN1_EXP_EX(stname, field, type, tag, ASN1_TFLG_OPTIONAL|ASN1_TFLG_NDEF)
-
-/* Macros for the ASN1_ADB structure */
-
-# define ASN1_ADB(name) \
-        static const ASN1_ADB_TABLE name##_adbtbl[]
-
-# ifndef OPENSSL_EXPORT_VAR_AS_FUNCTION
-
-#  define ASN1_ADB_END(name, flags, field, app_table, def, none) \
-        ;\
-        static const ASN1_ADB name##_adb = {\
-                flags,\
-                offsetof(name, field),\
-                app_table,\
-                name##_adbtbl,\
-                sizeof(name##_adbtbl) / sizeof(ASN1_ADB_TABLE),\
-                def,\
-                none\
-        }
-
-# else
-
-#  define ASN1_ADB_END(name, flags, field, app_table, def, none) \
-        ;\
-        static const ASN1_ITEM *name##_adb(void) \
-        { \
-        static const ASN1_ADB internal_adb = \
-                {\
-                flags,\
-                offsetof(name, field),\
-                app_table,\
-                name##_adbtbl,\
-                sizeof(name##_adbtbl) / sizeof(ASN1_ADB_TABLE),\
-                def,\
-                none\
-                }; \
-                return (const ASN1_ITEM *) &internal_adb; \
-        } \
-        void dummy_function(void)
-
-# endif
-
-# define ADB_ENTRY(val, template) {val, template}
-
-# define ASN1_ADB_TEMPLATE(name) \
-        static const ASN1_TEMPLATE name##_tt
-
-/*
- * This is the ASN1 template structure that defines a wrapper round the
- * actual type. It determines the actual position of the field in the value
- * structure, various flags such as OPTIONAL and the field name.
- */
-
-struct ASN1_TEMPLATE_st {
-    unsigned long flags;        /* Various flags */
-    long tag;                   /* tag, not used if no tagging */
-    unsigned long offset;       /* Offset of this field in structure */
-# ifndef NO_ASN1_FIELD_NAMES
-    const char *field_name;     /* Field name */
-# endif
-    ASN1_ITEM_EXP *item;        /* Relevant ASN1_ITEM or ASN1_ADB */
-};
-
-/* Macro to extract ASN1_ITEM and ASN1_ADB pointer from ASN1_TEMPLATE */
-
-# define ASN1_TEMPLATE_item(t) (t->item_ptr)
-# define ASN1_TEMPLATE_adb(t) (t->item_ptr)
-
-typedef struct ASN1_ADB_TABLE_st ASN1_ADB_TABLE;
-typedef struct ASN1_ADB_st ASN1_ADB;
-
-struct ASN1_ADB_st {
-    unsigned long flags;        /* Various flags */
-    unsigned long offset;       /* Offset of selector field */
-    STACK_OF(ASN1_ADB_TABLE) **app_items; /* Application defined items */
-    const ASN1_ADB_TABLE *tbl;  /* Table of possible types */
-    long tblcount;              /* Number of entries in tbl */
-    const ASN1_TEMPLATE *default_tt; /* Type to use if no match */
-    const ASN1_TEMPLATE *null_tt; /* Type to use if selector is NULL */
-};
-
-struct ASN1_ADB_TABLE_st {
-    long value;                 /* NID for an object or value for an int */
-    const ASN1_TEMPLATE tt;     /* item for this value */
-};
-
-/* template flags */
-
-/* Field is optional */
-# define ASN1_TFLG_OPTIONAL      (0x1)
-
-/* Field is a SET OF */
-# define ASN1_TFLG_SET_OF        (0x1 << 1)
-
-/* Field is a SEQUENCE OF */
-# define ASN1_TFLG_SEQUENCE_OF   (0x2 << 1)
-
-/*
- * Special case: this refers to a SET OF that will be sorted into DER order
- * when encoded *and* the corresponding STACK will be modified to match the
- * new order.
- */
-# define ASN1_TFLG_SET_ORDER     (0x3 << 1)
-
-/* Mask for SET OF or SEQUENCE OF */
-# define ASN1_TFLG_SK_MASK       (0x3 << 1)
-
-/*
- * These flags mean the tag should be taken from the tag field. If EXPLICIT
- * then the underlying type is used for the inner tag.
- */
-
-/* IMPLICIT tagging */
-# define ASN1_TFLG_IMPTAG        (0x1 << 3)
-
-/* EXPLICIT tagging, inner tag from underlying type */
-# define ASN1_TFLG_EXPTAG        (0x2 << 3)
-
-# define ASN1_TFLG_TAG_MASK      (0x3 << 3)
-
-/* context specific IMPLICIT */
-# define ASN1_TFLG_IMPLICIT      ASN1_TFLG_IMPTAG|ASN1_TFLG_CONTEXT
-
-/* context specific EXPLICIT */
-# define ASN1_TFLG_EXPLICIT      ASN1_TFLG_EXPTAG|ASN1_TFLG_CONTEXT
-
-/*
- * If tagging is in force these determine the type of tag to use. Otherwise
- * the tag is determined by the underlying type. These values reflect the
- * actual octet format.
- */
-
-/* Universal tag */
-# define ASN1_TFLG_UNIVERSAL     (0x0<<6)
-/* Application tag */
-# define ASN1_TFLG_APPLICATION   (0x1<<6)
-/* Context specific tag */
-# define ASN1_TFLG_CONTEXT       (0x2<<6)
-/* Private tag */
-# define ASN1_TFLG_PRIVATE       (0x3<<6)
-
-# define ASN1_TFLG_TAG_CLASS     (0x3<<6)
-
-/*
- * These are for ANY DEFINED BY type. In this case the 'item' field points to
- * an ASN1_ADB structure which contains a table of values to decode the
- * relevant type
- */
-
-# define ASN1_TFLG_ADB_MASK      (0x3<<8)
-
-# define ASN1_TFLG_ADB_OID       (0x1<<8)
-
-# define ASN1_TFLG_ADB_INT       (0x1<<9)
-
-/*
- * This flag means a parent structure is passed instead of the field: this is
- * useful is a SEQUENCE is being combined with a CHOICE for example. Since
- * this means the structure and item name will differ we need to use the
- * ASN1_CHOICE_END_name() macro for example.
- */
-
-# define ASN1_TFLG_COMBINE       (0x1<<10)
-
-/*
- * This flag when present in a SEQUENCE OF, SET OF or EXPLICIT causes
- * indefinite length constructed encoding to be used if required.
- */
-
-# define ASN1_TFLG_NDEF          (0x1<<11)
-
-/* This is the actual ASN1 item itself */
-
-struct ASN1_ITEM_st {
-    char itype;                 /* The item type, primitive, SEQUENCE, CHOICE
-                                 * or extern */
-    long utype;                 /* underlying type */
-    const ASN1_TEMPLATE *templates; /* If SEQUENCE or CHOICE this contains
-                                     * the contents */
-    long tcount;                /* Number of templates if SEQUENCE or CHOICE */
-    const void *funcs;          /* functions that handle this type */
-    long size;                  /* Structure size (usually) */
-# ifndef NO_ASN1_FIELD_NAMES
-    const char *sname;          /* Structure name */
-# endif
-};
-
-/*-
- * These are values for the itype field and
- * determine how the type is interpreted.
- *
- * For PRIMITIVE types the underlying type
- * determines the behaviour if items is NULL.
- *
- * Otherwise templates must contain a single
- * template and the type is treated in the
- * same way as the type specified in the template.
- *
- * For SEQUENCE types the templates field points
- * to the members, the size field is the
- * structure size.
- *
- * For CHOICE types the templates field points
- * to each possible member (typically a union)
- * and the 'size' field is the offset of the
- * selector.
- *
- * The 'funcs' field is used for application
- * specific functions.
- *
- * For COMPAT types the funcs field gives a
- * set of functions that handle this type, this
- * supports the old d2i, i2d convention.
- *
- * The EXTERN type uses a new style d2i/i2d.
- * The new style should be used where possible
- * because it avoids things like the d2i IMPLICIT
- * hack.
- *
- * MSTRING is a multiple string type, it is used
- * for a CHOICE of character strings where the
- * actual strings all occupy an ASN1_STRING
- * structure. In this case the 'utype' field
- * has a special meaning, it is used as a mask
- * of acceptable types using the B_ASN1 constants.
- *
- * NDEF_SEQUENCE is the same as SEQUENCE except
- * that it will use indefinite length constructed
- * encoding if requested.
- *
- */
-
-# define ASN1_ITYPE_PRIMITIVE            0x0
-
-# define ASN1_ITYPE_SEQUENCE             0x1
-
-# define ASN1_ITYPE_CHOICE               0x2
-
-# define ASN1_ITYPE_COMPAT               0x3
-
-# define ASN1_ITYPE_EXTERN               0x4
-
-# define ASN1_ITYPE_MSTRING              0x5
-
-# define ASN1_ITYPE_NDEF_SEQUENCE        0x6
-
-/*
- * Cache for ASN1 tag and length, so we don't keep re-reading it for things
- * like CHOICE
- */
-
-struct ASN1_TLC_st {
-    char valid;                 /* Values below are valid */
-    int ret;                    /* return value */
-    long plen;                  /* length */
-    int ptag;                   /* class value */
-    int pclass;                 /* class value */
-    int hdrlen;                 /* header length */
-};
-
-/* Typedefs for ASN1 function pointers */
-
-typedef ASN1_VALUE *ASN1_new_func(void);
-typedef void ASN1_free_func(ASN1_VALUE *a);
-typedef ASN1_VALUE *ASN1_d2i_func(ASN1_VALUE **a, const unsigned char **in,
-                                  long length);
-typedef int ASN1_i2d_func(ASN1_VALUE *a, unsigned char **in);
-
-typedef int ASN1_ex_d2i(ASN1_VALUE **pval, const unsigned char **in, long len,
-                        const ASN1_ITEM *it, int tag, int aclass, char opt,
-                        ASN1_TLC *ctx);
-
-typedef int ASN1_ex_i2d(ASN1_VALUE **pval, unsigned char **out,
-                        const ASN1_ITEM *it, int tag, int aclass);
-typedef int ASN1_ex_new_func(ASN1_VALUE **pval, const ASN1_ITEM *it);
-typedef void ASN1_ex_free_func(ASN1_VALUE **pval, const ASN1_ITEM *it);
-
-typedef int ASN1_ex_print_func(BIO *out, ASN1_VALUE **pval,
-                               int indent, const char *fname,
-                               const ASN1_PCTX *pctx);
-
-typedef int ASN1_primitive_i2c(ASN1_VALUE **pval, unsigned char *cont,
-                               int *putype, const ASN1_ITEM *it);
-typedef int ASN1_primitive_c2i(ASN1_VALUE **pval, const unsigned char *cont,
-                               int len, int utype, char *free_cont,
-                               const ASN1_ITEM *it);
-typedef int ASN1_primitive_print(BIO *out, ASN1_VALUE **pval,
-                                 const ASN1_ITEM *it, int indent,
-                                 const ASN1_PCTX *pctx);
-
-typedef struct ASN1_COMPAT_FUNCS_st {
-    ASN1_new_func *asn1_new;
-    ASN1_free_func *asn1_free;
-    ASN1_d2i_func *asn1_d2i;
-    ASN1_i2d_func *asn1_i2d;
-} ASN1_COMPAT_FUNCS;
-
-typedef struct ASN1_EXTERN_FUNCS_st {
-    void *app_data;
-    ASN1_ex_new_func *asn1_ex_new;
-    ASN1_ex_free_func *asn1_ex_free;
-    ASN1_ex_free_func *asn1_ex_clear;
-    ASN1_ex_d2i *asn1_ex_d2i;
-    ASN1_ex_i2d *asn1_ex_i2d;
-    ASN1_ex_print_func *asn1_ex_print;
-} ASN1_EXTERN_FUNCS;
-
-typedef struct ASN1_PRIMITIVE_FUNCS_st {
-    void *app_data;
-    unsigned long flags;
-    ASN1_ex_new_func *prim_new;
-    ASN1_ex_free_func *prim_free;
-    ASN1_ex_free_func *prim_clear;
-    ASN1_primitive_c2i *prim_c2i;
-    ASN1_primitive_i2c *prim_i2c;
-    ASN1_primitive_print *prim_print;
-} ASN1_PRIMITIVE_FUNCS;
-
-/*
- * This is the ASN1_AUX structure: it handles various miscellaneous
- * requirements. For example the use of reference counts and an informational
- * callback. The "informational callback" is called at various points during
- * the ASN1 encoding and decoding. It can be used to provide minor
- * customisation of the structures used. This is most useful where the
- * supplied routines *almost* do the right thing but need some extra help at
- * a few points. If the callback returns zero then it is assumed a fatal
- * error has occurred and the main operation should be abandoned. If major
- * changes in the default behaviour are required then an external type is
- * more appropriate.
- */
-
-typedef int ASN1_aux_cb(int operation, ASN1_VALUE **in, const ASN1_ITEM *it,
-                        void *exarg);
-
-typedef struct ASN1_AUX_st {
-    void *app_data;
-    int flags;
-    int ref_offset;             /* Offset of reference value */
-    int ref_lock;               /* Lock type to use */
-    ASN1_aux_cb *asn1_cb;
-    int enc_offset;             /* Offset of ASN1_ENCODING structure */
-} ASN1_AUX;
-
-/* For print related callbacks exarg points to this structure */
-typedef struct ASN1_PRINT_ARG_st {
-    BIO *out;
-    int indent;
-    const ASN1_PCTX *pctx;
-} ASN1_PRINT_ARG;
-
-/* For streaming related callbacks exarg points to this structure */
-typedef struct ASN1_STREAM_ARG_st {
-    /* BIO to stream through */
-    BIO *out;
-    /* BIO with filters appended */
-    BIO *ndef_bio;
-    /* Streaming I/O boundary */
-    unsigned char **boundary;
-} ASN1_STREAM_ARG;
-
-/* Flags in ASN1_AUX */
-
-/* Use a reference count */
-# define ASN1_AFLG_REFCOUNT      1
-/* Save the encoding of structure (useful for signatures) */
-# define ASN1_AFLG_ENCODING      2
-/* The Sequence length is invalid */
-# define ASN1_AFLG_BROKEN        4
-
-/* operation values for asn1_cb */
-
-# define ASN1_OP_NEW_PRE         0
-# define ASN1_OP_NEW_POST        1
-# define ASN1_OP_FREE_PRE        2
-# define ASN1_OP_FREE_POST       3
-# define ASN1_OP_D2I_PRE         4
-# define ASN1_OP_D2I_POST        5
-# define ASN1_OP_I2D_PRE         6
-# define ASN1_OP_I2D_POST        7
-# define ASN1_OP_PRINT_PRE       8
-# define ASN1_OP_PRINT_POST      9
-# define ASN1_OP_STREAM_PRE      10
-# define ASN1_OP_STREAM_POST     11
-# define ASN1_OP_DETACHED_PRE    12
-# define ASN1_OP_DETACHED_POST   13
-
-/* Macro to implement a primitive type */
-# define IMPLEMENT_ASN1_TYPE(stname) IMPLEMENT_ASN1_TYPE_ex(stname, stname, 0)
-# define IMPLEMENT_ASN1_TYPE_ex(itname, vname, ex) \
-                                ASN1_ITEM_start(itname) \
-                                        ASN1_ITYPE_PRIMITIVE, V_##vname, NULL, 0, NULL, ex, #itname \
-                                ASN1_ITEM_end(itname)
-
-/* Macro to implement a multi string type */
-# define IMPLEMENT_ASN1_MSTRING(itname, mask) \
-                                ASN1_ITEM_start(itname) \
-                                        ASN1_ITYPE_MSTRING, mask, NULL, 0, NULL, sizeof(ASN1_STRING), #itname \
-                                ASN1_ITEM_end(itname)
-
-/* Macro to implement an ASN1_ITEM in terms of old style funcs */
-
-# define IMPLEMENT_COMPAT_ASN1(sname) IMPLEMENT_COMPAT_ASN1_type(sname, V_ASN1_SEQUENCE)
-
-# define IMPLEMENT_COMPAT_ASN1_type(sname, tag) \
-        static const ASN1_COMPAT_FUNCS sname##_ff = { \
-                (ASN1_new_func *)sname##_new, \
-                (ASN1_free_func *)sname##_free, \
-                (ASN1_d2i_func *)d2i_##sname, \
-                (ASN1_i2d_func *)i2d_##sname, \
-        }; \
-        ASN1_ITEM_start(sname) \
-                ASN1_ITYPE_COMPAT, \
-                tag, \
-                NULL, \
-                0, \
-                &sname##_ff, \
-                0, \
-                #sname \
-        ASN1_ITEM_end(sname)
-
-# define IMPLEMENT_EXTERN_ASN1(sname, tag, fptrs) \
-        ASN1_ITEM_start(sname) \
-                ASN1_ITYPE_EXTERN, \
-                tag, \
-                NULL, \
-                0, \
-                &fptrs, \
-                0, \
-                #sname \
-        ASN1_ITEM_end(sname)
-
-/* Macro to implement standard functions in terms of ASN1_ITEM structures */
-
-# define IMPLEMENT_ASN1_FUNCTIONS(stname) IMPLEMENT_ASN1_FUNCTIONS_fname(stname, stname, stname)
-
-# define IMPLEMENT_ASN1_FUNCTIONS_name(stname, itname) IMPLEMENT_ASN1_FUNCTIONS_fname(stname, itname, itname)
-
-# define IMPLEMENT_ASN1_FUNCTIONS_ENCODE_name(stname, itname) \
-                        IMPLEMENT_ASN1_FUNCTIONS_ENCODE_fname(stname, itname, itname)
-
-# define IMPLEMENT_STATIC_ASN1_ALLOC_FUNCTIONS(stname) \
-                IMPLEMENT_ASN1_ALLOC_FUNCTIONS_pfname(static, stname, stname, stname)
-
-# define IMPLEMENT_ASN1_ALLOC_FUNCTIONS(stname) \
-                IMPLEMENT_ASN1_ALLOC_FUNCTIONS_fname(stname, stname, stname)
-
-# define IMPLEMENT_ASN1_ALLOC_FUNCTIONS_pfname(pre, stname, itname, fname) \
-        pre stname *fname##_new(void) \
-        { \
-                return (stname *)ASN1_item_new(ASN1_ITEM_rptr(itname)); \
-        } \
-        pre void fname##_free(stname *a) \
-        { \
-                ASN1_item_free((ASN1_VALUE *)a, ASN1_ITEM_rptr(itname)); \
-        }
-
-# define IMPLEMENT_ASN1_ALLOC_FUNCTIONS_fname(stname, itname, fname) \
-        stname *fname##_new(void) \
-        { \
-                return (stname *)ASN1_item_new(ASN1_ITEM_rptr(itname)); \
-        } \
-        void fname##_free(stname *a) \
-        { \
-                ASN1_item_free((ASN1_VALUE *)a, ASN1_ITEM_rptr(itname)); \
-        }
-
-# define IMPLEMENT_ASN1_FUNCTIONS_fname(stname, itname, fname) \
-        IMPLEMENT_ASN1_ENCODE_FUNCTIONS_fname(stname, itname, fname) \
-        IMPLEMENT_ASN1_ALLOC_FUNCTIONS_fname(stname, itname, fname)
-
-# define IMPLEMENT_ASN1_ENCODE_FUNCTIONS_fname(stname, itname, fname) \
-        stname *d2i_##fname(stname **a, const unsigned char **in, long len) \
-        { \
-                return (stname *)ASN1_item_d2i((ASN1_VALUE **)a, in, len, ASN1_ITEM_rptr(itname));\
-        } \
-        int i2d_##fname(stname *a, unsigned char **out) \
-        { \
-                return ASN1_item_i2d((ASN1_VALUE *)a, out, ASN1_ITEM_rptr(itname));\
-        }
-
-# define IMPLEMENT_ASN1_NDEF_FUNCTION(stname) \
-        int i2d_##stname##_NDEF(stname *a, unsigned char **out) \
-        { \
-                return ASN1_item_ndef_i2d((ASN1_VALUE *)a, out, ASN1_ITEM_rptr(stname));\
-        }
-
-/*
- * This includes evil casts to remove const: they will go away when full ASN1
- * constification is done.
- */
-# define IMPLEMENT_ASN1_ENCODE_FUNCTIONS_const_fname(stname, itname, fname) \
-        stname *d2i_##fname(stname **a, const unsigned char **in, long len) \
-        { \
-                return (stname *)ASN1_item_d2i((ASN1_VALUE **)a, in, len, ASN1_ITEM_rptr(itname));\
-        } \
-        int i2d_##fname(const stname *a, unsigned char **out) \
-        { \
-                return ASN1_item_i2d((ASN1_VALUE *)a, out, ASN1_ITEM_rptr(itname));\
-        }
-
-# define IMPLEMENT_ASN1_DUP_FUNCTION(stname) \
-        stname * stname##_dup(stname *x) \
-        { \
-        return ASN1_item_dup(ASN1_ITEM_rptr(stname), x); \
-        }
-
-# define IMPLEMENT_ASN1_PRINT_FUNCTION(stname) \
-        IMPLEMENT_ASN1_PRINT_FUNCTION_fname(stname, stname, stname)
-
-# define IMPLEMENT_ASN1_PRINT_FUNCTION_fname(stname, itname, fname) \
-        int fname##_print_ctx(BIO *out, stname *x, int indent, \
-                                                const ASN1_PCTX *pctx) \
-        { \
-                return ASN1_item_print(out, (ASN1_VALUE *)x, indent, \
-                        ASN1_ITEM_rptr(itname), pctx); \
-        }
-
-# define IMPLEMENT_ASN1_FUNCTIONS_const(name) \
-                IMPLEMENT_ASN1_FUNCTIONS_const_fname(name, name, name)
-
-# define IMPLEMENT_ASN1_FUNCTIONS_const_fname(stname, itname, fname) \
-        IMPLEMENT_ASN1_ENCODE_FUNCTIONS_const_fname(stname, itname, fname) \
-        IMPLEMENT_ASN1_ALLOC_FUNCTIONS_fname(stname, itname, fname)
-
-/* external definitions for primitive types */
-
-DECLARE_ASN1_ITEM(ASN1_BOOLEAN)
-DECLARE_ASN1_ITEM(ASN1_TBOOLEAN)
-DECLARE_ASN1_ITEM(ASN1_FBOOLEAN)
-DECLARE_ASN1_ITEM(ASN1_SEQUENCE)
-DECLARE_ASN1_ITEM(CBIGNUM)
-DECLARE_ASN1_ITEM(BIGNUM)
-DECLARE_ASN1_ITEM(LONG)
-DECLARE_ASN1_ITEM(ZLONG)
-
-DECLARE_STACK_OF(ASN1_VALUE)
-
-/* Functions used internally by the ASN1 code */
-
-int ASN1_item_ex_new(ASN1_VALUE **pval, const ASN1_ITEM *it);
-void ASN1_item_ex_free(ASN1_VALUE **pval, const ASN1_ITEM *it);
-int ASN1_template_new(ASN1_VALUE **pval, const ASN1_TEMPLATE *tt);
-int ASN1_primitive_new(ASN1_VALUE **pval, const ASN1_ITEM *it);
-
-void ASN1_template_free(ASN1_VALUE **pval, const ASN1_TEMPLATE *tt);
-int ASN1_template_d2i(ASN1_VALUE **pval, const unsigned char **in, long len,
-                      const ASN1_TEMPLATE *tt);
-int ASN1_item_ex_d2i(ASN1_VALUE **pval, const unsigned char **in, long len,
-                     const ASN1_ITEM *it, int tag, int aclass, char opt,
-                     ASN1_TLC *ctx);
-
-int ASN1_item_ex_i2d(ASN1_VALUE **pval, unsigned char **out,
-                     const ASN1_ITEM *it, int tag, int aclass);
-int ASN1_template_i2d(ASN1_VALUE **pval, unsigned char **out,
-                      const ASN1_TEMPLATE *tt);
-void ASN1_primitive_free(ASN1_VALUE **pval, const ASN1_ITEM *it);
-
-int asn1_ex_i2c(ASN1_VALUE **pval, unsigned char *cont, int *putype,
-                const ASN1_ITEM *it);
-int asn1_ex_c2i(ASN1_VALUE **pval, const unsigned char *cont, int len,
-                int utype, char *free_cont, const ASN1_ITEM *it);
-
-int asn1_get_choice_selector(ASN1_VALUE **pval, const ASN1_ITEM *it);
-int asn1_set_choice_selector(ASN1_VALUE **pval, int value,
-                             const ASN1_ITEM *it);
-
-ASN1_VALUE **asn1_get_field_ptr(ASN1_VALUE **pval, const ASN1_TEMPLATE *tt);
-
-const ASN1_TEMPLATE *asn1_do_adb(ASN1_VALUE **pval, const ASN1_TEMPLATE *tt,
-                                 int nullerr);
-
-int asn1_do_lock(ASN1_VALUE **pval, int op, const ASN1_ITEM *it);
-
-void asn1_enc_init(ASN1_VALUE **pval, const ASN1_ITEM *it);
-void asn1_enc_free(ASN1_VALUE **pval, const ASN1_ITEM *it);
-int asn1_enc_restore(int *len, unsigned char **out, ASN1_VALUE **pval,
-                     const ASN1_ITEM *it);
-int asn1_enc_save(ASN1_VALUE **pval, const unsigned char *in, int inlen,
-                  const ASN1_ITEM *it);
-
-#ifdef  __cplusplus
-}
-#endif
-#endif

deps/openssl/openssl/include/openssl/bio.h

@@ -1,883 +0,0 @@
-/* crypto/bio/bio.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_BIO_H
-# define HEADER_BIO_H
-
-# include <openssl/e_os2.h>
-
-# ifndef OPENSSL_NO_FP_API
-#  include <stdio.h>
-# endif
-# include <stdarg.h>
-
-# include <openssl/crypto.h>
-
-# ifndef OPENSSL_NO_SCTP
-#  ifndef OPENSSL_SYS_VMS
-#   include <stdint.h>
-#  else
-#   include <inttypes.h>
-#  endif
-# endif
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* These are the 'types' of BIOs */
-# define BIO_TYPE_NONE           0
-# define BIO_TYPE_MEM            (1|0x0400)
-# define BIO_TYPE_FILE           (2|0x0400)
-
-# define BIO_TYPE_FD             (4|0x0400|0x0100)
-# define BIO_TYPE_SOCKET         (5|0x0400|0x0100)
-# define BIO_TYPE_NULL           (6|0x0400)
-# define BIO_TYPE_SSL            (7|0x0200)
-# define BIO_TYPE_MD             (8|0x0200)/* passive filter */
-# define BIO_TYPE_BUFFER         (9|0x0200)/* filter */
-# define BIO_TYPE_CIPHER         (10|0x0200)/* filter */
-# define BIO_TYPE_BASE64         (11|0x0200)/* filter */
-# define BIO_TYPE_CONNECT        (12|0x0400|0x0100)/* socket - connect */
-# define BIO_TYPE_ACCEPT         (13|0x0400|0x0100)/* socket for accept */
-# define BIO_TYPE_PROXY_CLIENT   (14|0x0200)/* client proxy BIO */
-# define BIO_TYPE_PROXY_SERVER   (15|0x0200)/* server proxy BIO */
-# define BIO_TYPE_NBIO_TEST      (16|0x0200)/* server proxy BIO */
-# define BIO_TYPE_NULL_FILTER    (17|0x0200)
-# define BIO_TYPE_BER            (18|0x0200)/* BER -> bin filter */
-# define BIO_TYPE_BIO            (19|0x0400)/* (half a) BIO pair */
-# define BIO_TYPE_LINEBUFFER     (20|0x0200)/* filter */
-# define BIO_TYPE_DGRAM          (21|0x0400|0x0100)
-# ifndef OPENSSL_NO_SCTP
-#  define BIO_TYPE_DGRAM_SCTP     (24|0x0400|0x0100)
-# endif
-# define BIO_TYPE_ASN1           (22|0x0200)/* filter */
-# define BIO_TYPE_COMP           (23|0x0200)/* filter */
-
-# define BIO_TYPE_DESCRIPTOR     0x0100/* socket, fd, connect or accept */
-# define BIO_TYPE_FILTER         0x0200
-# define BIO_TYPE_SOURCE_SINK    0x0400
-
-/*
- * BIO_FILENAME_READ|BIO_CLOSE to open or close on free.
- * BIO_set_fp(in,stdin,BIO_NOCLOSE);
- */
-# define BIO_NOCLOSE             0x00
-# define BIO_CLOSE               0x01
-
-/*
- * These are used in the following macros and are passed to BIO_ctrl()
- */
-# define BIO_CTRL_RESET          1/* opt - rewind/zero etc */
-# define BIO_CTRL_EOF            2/* opt - are we at the eof */
-# define BIO_CTRL_INFO           3/* opt - extra tit-bits */
-# define BIO_CTRL_SET            4/* man - set the 'IO' type */
-# define BIO_CTRL_GET            5/* man - get the 'IO' type */
-# define BIO_CTRL_PUSH           6/* opt - internal, used to signify change */
-# define BIO_CTRL_POP            7/* opt - internal, used to signify change */
-# define BIO_CTRL_GET_CLOSE      8/* man - set the 'close' on free */
-# define BIO_CTRL_SET_CLOSE      9/* man - set the 'close' on free */
-# define BIO_CTRL_PENDING        10/* opt - is their more data buffered */
-# define BIO_CTRL_FLUSH          11/* opt - 'flush' buffered output */
-# define BIO_CTRL_DUP            12/* man - extra stuff for 'duped' BIO */
-# define BIO_CTRL_WPENDING       13/* opt - number of bytes still to write */
-/* callback is int cb(BIO *bio,state,ret); */
-# define BIO_CTRL_SET_CALLBACK   14/* opt - set callback function */
-# define BIO_CTRL_GET_CALLBACK   15/* opt - set callback function */
-
-# define BIO_CTRL_SET_FILENAME   30/* BIO_s_file special */
-
-/* dgram BIO stuff */
-# define BIO_CTRL_DGRAM_CONNECT       31/* BIO dgram special */
-# define BIO_CTRL_DGRAM_SET_CONNECTED 32/* allow for an externally connected
-                                         * socket to be passed in */
-# define BIO_CTRL_DGRAM_SET_RECV_TIMEOUT 33/* setsockopt, essentially */
-# define BIO_CTRL_DGRAM_GET_RECV_TIMEOUT 34/* getsockopt, essentially */
-# define BIO_CTRL_DGRAM_SET_SEND_TIMEOUT 35/* setsockopt, essentially */
-# define BIO_CTRL_DGRAM_GET_SEND_TIMEOUT 36/* getsockopt, essentially */
-
-# define BIO_CTRL_DGRAM_GET_RECV_TIMER_EXP 37/* flag whether the last */
-# define BIO_CTRL_DGRAM_GET_SEND_TIMER_EXP 38/* I/O operation tiemd out */
-
-/* #ifdef IP_MTU_DISCOVER */
-# define BIO_CTRL_DGRAM_MTU_DISCOVER       39/* set DF bit on egress packets */
-/* #endif */
-
-# define BIO_CTRL_DGRAM_QUERY_MTU          40/* as kernel for current MTU */
-# define BIO_CTRL_DGRAM_GET_FALLBACK_MTU   47
-# define BIO_CTRL_DGRAM_GET_MTU            41/* get cached value for MTU */
-# define BIO_CTRL_DGRAM_SET_MTU            42/* set cached value for MTU.
-                                              * want to use this if asking
-                                              * the kernel fails */
-
-# define BIO_CTRL_DGRAM_MTU_EXCEEDED       43/* check whether the MTU was
-                                              * exceed in the previous write
-                                              * operation */
-
-# define BIO_CTRL_DGRAM_GET_PEER           46
-# define BIO_CTRL_DGRAM_SET_PEER           44/* Destination for the data */
-
-# define BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT   45/* Next DTLS handshake timeout
-                                              * to adjust socket timeouts */
-# define BIO_CTRL_DGRAM_SET_DONT_FRAG      48
-
-# define BIO_CTRL_DGRAM_GET_MTU_OVERHEAD   49
-
-# ifndef OPENSSL_NO_SCTP
-/* SCTP stuff */
-#  define BIO_CTRL_DGRAM_SCTP_SET_IN_HANDSHAKE    50
-#  define BIO_CTRL_DGRAM_SCTP_ADD_AUTH_KEY                51
-#  define BIO_CTRL_DGRAM_SCTP_NEXT_AUTH_KEY               52
-#  define BIO_CTRL_DGRAM_SCTP_AUTH_CCS_RCVD               53
-#  define BIO_CTRL_DGRAM_SCTP_GET_SNDINFO         60
-#  define BIO_CTRL_DGRAM_SCTP_SET_SNDINFO         61
-#  define BIO_CTRL_DGRAM_SCTP_GET_RCVINFO         62
-#  define BIO_CTRL_DGRAM_SCTP_SET_RCVINFO         63
-#  define BIO_CTRL_DGRAM_SCTP_GET_PRINFO                  64
-#  define BIO_CTRL_DGRAM_SCTP_SET_PRINFO                  65
-#  define BIO_CTRL_DGRAM_SCTP_SAVE_SHUTDOWN               70
-# endif
-
-/* modifiers */
-# define BIO_FP_READ             0x02
-# define BIO_FP_WRITE            0x04
-# define BIO_FP_APPEND           0x08
-# define BIO_FP_TEXT             0x10
-
-# define BIO_FLAGS_READ          0x01
-# define BIO_FLAGS_WRITE         0x02
-# define BIO_FLAGS_IO_SPECIAL    0x04
-# define BIO_FLAGS_RWS (BIO_FLAGS_READ|BIO_FLAGS_WRITE|BIO_FLAGS_IO_SPECIAL)
-# define BIO_FLAGS_SHOULD_RETRY  0x08
-# ifndef BIO_FLAGS_UPLINK
-/*
- * "UPLINK" flag denotes file descriptors provided by application. It
- * defaults to 0, as most platforms don't require UPLINK interface.
- */
-#  define BIO_FLAGS_UPLINK        0
-# endif
-
-/* Used in BIO_gethostbyname() */
-# define BIO_GHBN_CTRL_HITS              1
-# define BIO_GHBN_CTRL_MISSES            2
-# define BIO_GHBN_CTRL_CACHE_SIZE        3
-# define BIO_GHBN_CTRL_GET_ENTRY         4
-# define BIO_GHBN_CTRL_FLUSH             5
-
-/* Mostly used in the SSL BIO */
-/*-
- * Not used anymore
- * #define BIO_FLAGS_PROTOCOL_DELAYED_READ 0x10
- * #define BIO_FLAGS_PROTOCOL_DELAYED_WRITE 0x20
- * #define BIO_FLAGS_PROTOCOL_STARTUP   0x40
- */
-
-# define BIO_FLAGS_BASE64_NO_NL  0x100
-
-/*
- * This is used with memory BIOs: it means we shouldn't free up or change the
- * data in any way.
- */
-# define BIO_FLAGS_MEM_RDONLY    0x200
-
-typedef struct bio_st BIO;
-
-void BIO_set_flags(BIO *b, int flags);
-int BIO_test_flags(const BIO *b, int flags);
-void BIO_clear_flags(BIO *b, int flags);
-
-# define BIO_get_flags(b) BIO_test_flags(b, ~(0x0))
-# define BIO_set_retry_special(b) \
-                BIO_set_flags(b, (BIO_FLAGS_IO_SPECIAL|BIO_FLAGS_SHOULD_RETRY))
-# define BIO_set_retry_read(b) \
-                BIO_set_flags(b, (BIO_FLAGS_READ|BIO_FLAGS_SHOULD_RETRY))
-# define BIO_set_retry_write(b) \
-                BIO_set_flags(b, (BIO_FLAGS_WRITE|BIO_FLAGS_SHOULD_RETRY))
-
-/* These are normally used internally in BIOs */
-# define BIO_clear_retry_flags(b) \
-                BIO_clear_flags(b, (BIO_FLAGS_RWS|BIO_FLAGS_SHOULD_RETRY))
-# define BIO_get_retry_flags(b) \
-                BIO_test_flags(b, (BIO_FLAGS_RWS|BIO_FLAGS_SHOULD_RETRY))
-
-/* These should be used by the application to tell why we should retry */
-# define BIO_should_read(a)              BIO_test_flags(a, BIO_FLAGS_READ)
-# define BIO_should_write(a)             BIO_test_flags(a, BIO_FLAGS_WRITE)
-# define BIO_should_io_special(a)        BIO_test_flags(a, BIO_FLAGS_IO_SPECIAL)
-# define BIO_retry_type(a)               BIO_test_flags(a, BIO_FLAGS_RWS)
-# define BIO_should_retry(a)             BIO_test_flags(a, BIO_FLAGS_SHOULD_RETRY)
-
-/*
- * The next three are used in conjunction with the BIO_should_io_special()
- * condition.  After this returns true, BIO *BIO_get_retry_BIO(BIO *bio, int
- * *reason); will walk the BIO stack and return the 'reason' for the special
- * and the offending BIO. Given a BIO, BIO_get_retry_reason(bio) will return
- * the code.
- */
-/*
- * Returned from the SSL bio when the certificate retrieval code had an error
- */
-# define BIO_RR_SSL_X509_LOOKUP          0x01
-/* Returned from the connect BIO when a connect would have blocked */
-# define BIO_RR_CONNECT                  0x02
-/* Returned from the accept BIO when an accept would have blocked */
-# define BIO_RR_ACCEPT                   0x03
-
-/* These are passed by the BIO callback */
-# define BIO_CB_FREE     0x01
-# define BIO_CB_READ     0x02
-# define BIO_CB_WRITE    0x03
-# define BIO_CB_PUTS     0x04
-# define BIO_CB_GETS     0x05
-# define BIO_CB_CTRL     0x06
-
-/*
- * The callback is called before and after the underling operation, The
- * BIO_CB_RETURN flag indicates if it is after the call
- */
-# define BIO_CB_RETURN   0x80
-# define BIO_CB_return(a) ((a)|BIO_CB_RETURN)
-# define BIO_cb_pre(a)   (!((a)&BIO_CB_RETURN))
-# define BIO_cb_post(a)  ((a)&BIO_CB_RETURN)
-
-long (*BIO_get_callback(const BIO *b)) (struct bio_st *, int, const char *,
-                                        int, long, long);
-void BIO_set_callback(BIO *b,
-                      long (*callback) (struct bio_st *, int, const char *,
-                                        int, long, long));
-char *BIO_get_callback_arg(const BIO *b);
-void BIO_set_callback_arg(BIO *b, char *arg);
-
-const char *BIO_method_name(const BIO *b);
-int BIO_method_type(const BIO *b);
-
-typedef void bio_info_cb (struct bio_st *, int, const char *, int, long,
-                          long);
-
-typedef struct bio_method_st {
-    int type;
-    const char *name;
-    int (*bwrite) (BIO *, const char *, int);
-    int (*bread) (BIO *, char *, int);
-    int (*bputs) (BIO *, const char *);
-    int (*bgets) (BIO *, char *, int);
-    long (*ctrl) (BIO *, int, long, void *);
-    int (*create) (BIO *);
-    int (*destroy) (BIO *);
-    long (*callback_ctrl) (BIO *, int, bio_info_cb *);
-} BIO_METHOD;
-
-struct bio_st {
-    BIO_METHOD *method;
-    /* bio, mode, argp, argi, argl, ret */
-    long (*callback) (struct bio_st *, int, const char *, int, long, long);
-    char *cb_arg;               /* first argument for the callback */
-    int init;
-    int shutdown;
-    int flags;                  /* extra storage */
-    int retry_reason;
-    int num;
-    void *ptr;
-    struct bio_st *next_bio;    /* used by filter BIOs */
-    struct bio_st *prev_bio;    /* used by filter BIOs */
-    int references;
-    unsigned long num_read;
-    unsigned long num_write;
-    CRYPTO_EX_DATA ex_data;
-};
-
-DECLARE_STACK_OF(BIO)
-
-typedef struct bio_f_buffer_ctx_struct {
-    /*-
-     * Buffers are setup like this:
-     *
-     * <---------------------- size ----------------------->
-     * +---------------------------------------------------+
-     * | consumed | remaining          | free space        |
-     * +---------------------------------------------------+
-     * <-- off --><------- len ------->
-     */
-    /*- BIO *bio; *//*
-     * this is now in the BIO struct
-     */
-    int ibuf_size;              /* how big is the input buffer */
-    int obuf_size;              /* how big is the output buffer */
-    char *ibuf;                 /* the char array */
-    int ibuf_len;               /* how many bytes are in it */
-    int ibuf_off;               /* write/read offset */
-    char *obuf;                 /* the char array */
-    int obuf_len;               /* how many bytes are in it */
-    int obuf_off;               /* write/read offset */
-} BIO_F_BUFFER_CTX;
-
-/* Prefix and suffix callback in ASN1 BIO */
-typedef int asn1_ps_func (BIO *b, unsigned char **pbuf, int *plen,
-                          void *parg);
-
-# ifndef OPENSSL_NO_SCTP
-/* SCTP parameter structs */
-struct bio_dgram_sctp_sndinfo {
-    uint16_t snd_sid;
-    uint16_t snd_flags;
-    uint32_t snd_ppid;
-    uint32_t snd_context;
-};
-
-struct bio_dgram_sctp_rcvinfo {
-    uint16_t rcv_sid;
-    uint16_t rcv_ssn;
-    uint16_t rcv_flags;
-    uint32_t rcv_ppid;
-    uint32_t rcv_tsn;
-    uint32_t rcv_cumtsn;
-    uint32_t rcv_context;
-};
-
-struct bio_dgram_sctp_prinfo {
-    uint16_t pr_policy;
-    uint32_t pr_value;
-};
-# endif
-
-/* connect BIO stuff */
-# define BIO_CONN_S_BEFORE               1
-# define BIO_CONN_S_GET_IP               2
-# define BIO_CONN_S_GET_PORT             3
-# define BIO_CONN_S_CREATE_SOCKET        4
-# define BIO_CONN_S_CONNECT              5
-# define BIO_CONN_S_OK                   6
-# define BIO_CONN_S_BLOCKED_CONNECT      7
-# define BIO_CONN_S_NBIO                 8
-/*
- * #define BIO_CONN_get_param_hostname BIO_ctrl
- */
-
-# define BIO_C_SET_CONNECT                       100
-# define BIO_C_DO_STATE_MACHINE                  101
-# define BIO_C_SET_NBIO                          102
-# define BIO_C_SET_PROXY_PARAM                   103
-# define BIO_C_SET_FD                            104
-# define BIO_C_GET_FD                            105
-# define BIO_C_SET_FILE_PTR                      106
-# define BIO_C_GET_FILE_PTR                      107
-# define BIO_C_SET_FILENAME                      108
-# define BIO_C_SET_SSL                           109
-# define BIO_C_GET_SSL                           110
-# define BIO_C_SET_MD                            111
-# define BIO_C_GET_MD                            112
-# define BIO_C_GET_CIPHER_STATUS                 113
-# define BIO_C_SET_BUF_MEM                       114
-# define BIO_C_GET_BUF_MEM_PTR                   115
-# define BIO_C_GET_BUFF_NUM_LINES                116
-# define BIO_C_SET_BUFF_SIZE                     117
-# define BIO_C_SET_ACCEPT                        118
-# define BIO_C_SSL_MODE                          119
-# define BIO_C_GET_MD_CTX                        120
-# define BIO_C_GET_PROXY_PARAM                   121
-# define BIO_C_SET_BUFF_READ_DATA                122/* data to read first */
-# define BIO_C_GET_CONNECT                       123
-# define BIO_C_GET_ACCEPT                        124
-# define BIO_C_SET_SSL_RENEGOTIATE_BYTES         125
-# define BIO_C_GET_SSL_NUM_RENEGOTIATES          126
-# define BIO_C_SET_SSL_RENEGOTIATE_TIMEOUT       127
-# define BIO_C_FILE_SEEK                         128
-# define BIO_C_GET_CIPHER_CTX                    129
-# define BIO_C_SET_BUF_MEM_EOF_RETURN            130/* return end of input
-                                                     * value */
-# define BIO_C_SET_BIND_MODE                     131
-# define BIO_C_GET_BIND_MODE                     132
-# define BIO_C_FILE_TELL                         133
-# define BIO_C_GET_SOCKS                         134
-# define BIO_C_SET_SOCKS                         135
-
-# define BIO_C_SET_WRITE_BUF_SIZE                136/* for BIO_s_bio */
-# define BIO_C_GET_WRITE_BUF_SIZE                137
-# define BIO_C_MAKE_BIO_PAIR                     138
-# define BIO_C_DESTROY_BIO_PAIR                  139
-# define BIO_C_GET_WRITE_GUARANTEE               140
-# define BIO_C_GET_READ_REQUEST                  141
-# define BIO_C_SHUTDOWN_WR                       142
-# define BIO_C_NREAD0                            143
-# define BIO_C_NREAD                             144
-# define BIO_C_NWRITE0                           145
-# define BIO_C_NWRITE                            146
-# define BIO_C_RESET_READ_REQUEST                147
-# define BIO_C_SET_MD_CTX                        148
-
-# define BIO_C_SET_PREFIX                        149
-# define BIO_C_GET_PREFIX                        150
-# define BIO_C_SET_SUFFIX                        151
-# define BIO_C_GET_SUFFIX                        152
-
-# define BIO_C_SET_EX_ARG                        153
-# define BIO_C_GET_EX_ARG                        154
-
-# define BIO_set_app_data(s,arg)         BIO_set_ex_data(s,0,arg)
-# define BIO_get_app_data(s)             BIO_get_ex_data(s,0)
-
-/* BIO_s_connect() and BIO_s_socks4a_connect() */
-# define BIO_set_conn_hostname(b,name) BIO_ctrl(b,BIO_C_SET_CONNECT,0,(char *)name)
-# define BIO_set_conn_port(b,port) BIO_ctrl(b,BIO_C_SET_CONNECT,1,(char *)port)
-# define BIO_set_conn_ip(b,ip)     BIO_ctrl(b,BIO_C_SET_CONNECT,2,(char *)ip)
-# define BIO_set_conn_int_port(b,port) BIO_ctrl(b,BIO_C_SET_CONNECT,3,(char *)port)
-# define BIO_get_conn_hostname(b)  BIO_ptr_ctrl(b,BIO_C_GET_CONNECT,0)
-# define BIO_get_conn_port(b)      BIO_ptr_ctrl(b,BIO_C_GET_CONNECT,1)
-# define BIO_get_conn_ip(b)               BIO_ptr_ctrl(b,BIO_C_GET_CONNECT,2)
-# define BIO_get_conn_int_port(b) BIO_ctrl(b,BIO_C_GET_CONNECT,3,NULL)
-
-# define BIO_set_nbio(b,n)       BIO_ctrl(b,BIO_C_SET_NBIO,(n),NULL)
-
-/* BIO_s_accept() */
-# define BIO_set_accept_port(b,name) BIO_ctrl(b,BIO_C_SET_ACCEPT,0,(char *)name)
-# define BIO_get_accept_port(b)  BIO_ptr_ctrl(b,BIO_C_GET_ACCEPT,0)
-/* #define BIO_set_nbio(b,n)    BIO_ctrl(b,BIO_C_SET_NBIO,(n),NULL) */
-# define BIO_set_nbio_accept(b,n) BIO_ctrl(b,BIO_C_SET_ACCEPT,1,(n)?(void *)"a":NULL)
-# define BIO_set_accept_bios(b,bio) BIO_ctrl(b,BIO_C_SET_ACCEPT,2,(char *)bio)
-
-# define BIO_BIND_NORMAL                 0
-# define BIO_BIND_REUSEADDR_IF_UNUSED    1
-# define BIO_BIND_REUSEADDR              2
-# define BIO_set_bind_mode(b,mode) BIO_ctrl(b,BIO_C_SET_BIND_MODE,mode,NULL)
-# define BIO_get_bind_mode(b,mode) BIO_ctrl(b,BIO_C_GET_BIND_MODE,0,NULL)
-
-/* BIO_s_accept() and BIO_s_connect() */
-# define BIO_do_connect(b)       BIO_do_handshake(b)
-# define BIO_do_accept(b)        BIO_do_handshake(b)
-# define BIO_do_handshake(b)     BIO_ctrl(b,BIO_C_DO_STATE_MACHINE,0,NULL)
-
-/* BIO_s_proxy_client() */
-# define BIO_set_url(b,url)      BIO_ctrl(b,BIO_C_SET_PROXY_PARAM,0,(char *)(url))
-# define BIO_set_proxies(b,p)    BIO_ctrl(b,BIO_C_SET_PROXY_PARAM,1,(char *)(p))
-/* BIO_set_nbio(b,n) */
-# define BIO_set_filter_bio(b,s) BIO_ctrl(b,BIO_C_SET_PROXY_PARAM,2,(char *)(s))
-/* BIO *BIO_get_filter_bio(BIO *bio); */
-# define BIO_set_proxy_cb(b,cb) BIO_callback_ctrl(b,BIO_C_SET_PROXY_PARAM,3,(void *(*cb)()))
-# define BIO_set_proxy_header(b,sk) BIO_ctrl(b,BIO_C_SET_PROXY_PARAM,4,(char *)sk)
-# define BIO_set_no_connect_return(b,bool) BIO_int_ctrl(b,BIO_C_SET_PROXY_PARAM,5,bool)
-
-# define BIO_get_proxy_header(b,skp) BIO_ctrl(b,BIO_C_GET_PROXY_PARAM,0,(char *)skp)
-# define BIO_get_proxies(b,pxy_p) BIO_ctrl(b,BIO_C_GET_PROXY_PARAM,1,(char *)(pxy_p))
-# define BIO_get_url(b,url)      BIO_ctrl(b,BIO_C_GET_PROXY_PARAM,2,(char *)(url))
-# define BIO_get_no_connect_return(b)    BIO_ctrl(b,BIO_C_GET_PROXY_PARAM,5,NULL)
-
-/* BIO_s_datagram(), BIO_s_fd(), BIO_s_socket(), BIO_s_accept() and BIO_s_connect() */
-# define BIO_set_fd(b,fd,c)      BIO_int_ctrl(b,BIO_C_SET_FD,c,fd)
-# define BIO_get_fd(b,c)         BIO_ctrl(b,BIO_C_GET_FD,0,(char *)c)
-
-/* BIO_s_file() */
-# define BIO_set_fp(b,fp,c)      BIO_ctrl(b,BIO_C_SET_FILE_PTR,c,(char *)fp)
-# define BIO_get_fp(b,fpp)       BIO_ctrl(b,BIO_C_GET_FILE_PTR,0,(char *)fpp)
-
-/* BIO_s_fd() and BIO_s_file() */
-# define BIO_seek(b,ofs) (int)BIO_ctrl(b,BIO_C_FILE_SEEK,ofs,NULL)
-# define BIO_tell(b)     (int)BIO_ctrl(b,BIO_C_FILE_TELL,0,NULL)
-
-/*
- * name is cast to lose const, but might be better to route through a
- * function so we can do it safely
- */
-# ifdef CONST_STRICT
-/*
- * If you are wondering why this isn't defined, its because CONST_STRICT is
- * purely a compile-time kludge to allow const to be checked.
- */
-int BIO_read_filename(BIO *b, const char *name);
-# else
-#  define BIO_read_filename(b,name) BIO_ctrl(b,BIO_C_SET_FILENAME, \
-                BIO_CLOSE|BIO_FP_READ,(char *)name)
-# endif
-# define BIO_write_filename(b,name) BIO_ctrl(b,BIO_C_SET_FILENAME, \
-                BIO_CLOSE|BIO_FP_WRITE,name)
-# define BIO_append_filename(b,name) BIO_ctrl(b,BIO_C_SET_FILENAME, \
-                BIO_CLOSE|BIO_FP_APPEND,name)
-# define BIO_rw_filename(b,name) BIO_ctrl(b,BIO_C_SET_FILENAME, \
-                BIO_CLOSE|BIO_FP_READ|BIO_FP_WRITE,name)
-
-/*
- * WARNING WARNING, this ups the reference count on the read bio of the SSL
- * structure.  This is because the ssl read BIO is now pointed to by the
- * next_bio field in the bio.  So when you free the BIO, make sure you are
- * doing a BIO_free_all() to catch the underlying BIO.
- */
-# define BIO_set_ssl(b,ssl,c)    BIO_ctrl(b,BIO_C_SET_SSL,c,(char *)ssl)
-# define BIO_get_ssl(b,sslp)     BIO_ctrl(b,BIO_C_GET_SSL,0,(char *)sslp)
-# define BIO_set_ssl_mode(b,client)      BIO_ctrl(b,BIO_C_SSL_MODE,client,NULL)
-# define BIO_set_ssl_renegotiate_bytes(b,num) \
-        BIO_ctrl(b,BIO_C_SET_SSL_RENEGOTIATE_BYTES,num,NULL)
-# define BIO_get_num_renegotiates(b) \
-        BIO_ctrl(b,BIO_C_GET_SSL_NUM_RENEGOTIATES,0,NULL)
-# define BIO_set_ssl_renegotiate_timeout(b,seconds) \
-        BIO_ctrl(b,BIO_C_SET_SSL_RENEGOTIATE_TIMEOUT,seconds,NULL)
-
-/* defined in evp.h */
-/* #define BIO_set_md(b,md)     BIO_ctrl(b,BIO_C_SET_MD,1,(char *)md) */
-
-# define BIO_get_mem_data(b,pp)  BIO_ctrl(b,BIO_CTRL_INFO,0,(char *)pp)
-# define BIO_set_mem_buf(b,bm,c) BIO_ctrl(b,BIO_C_SET_BUF_MEM,c,(char *)bm)
-# define BIO_get_mem_ptr(b,pp)   BIO_ctrl(b,BIO_C_GET_BUF_MEM_PTR,0,(char *)pp)
-# define BIO_set_mem_eof_return(b,v) \
-                                BIO_ctrl(b,BIO_C_SET_BUF_MEM_EOF_RETURN,v,NULL)
-
-/* For the BIO_f_buffer() type */
-# define BIO_get_buffer_num_lines(b)     BIO_ctrl(b,BIO_C_GET_BUFF_NUM_LINES,0,NULL)
-# define BIO_set_buffer_size(b,size)     BIO_ctrl(b,BIO_C_SET_BUFF_SIZE,size,NULL)
-# define BIO_set_read_buffer_size(b,size) BIO_int_ctrl(b,BIO_C_SET_BUFF_SIZE,size,0)
-# define BIO_set_write_buffer_size(b,size) BIO_int_ctrl(b,BIO_C_SET_BUFF_SIZE,size,1)
-# define BIO_set_buffer_read_data(b,buf,num) BIO_ctrl(b,BIO_C_SET_BUFF_READ_DATA,num,buf)
-
-/* Don't use the next one unless you know what you are doing :-) */
-# define BIO_dup_state(b,ret)    BIO_ctrl(b,BIO_CTRL_DUP,0,(char *)(ret))
-
-# define BIO_reset(b)            (int)BIO_ctrl(b,BIO_CTRL_RESET,0,NULL)
-# define BIO_eof(b)              (int)BIO_ctrl(b,BIO_CTRL_EOF,0,NULL)
-# define BIO_set_close(b,c)      (int)BIO_ctrl(b,BIO_CTRL_SET_CLOSE,(c),NULL)
-# define BIO_get_close(b)        (int)BIO_ctrl(b,BIO_CTRL_GET_CLOSE,0,NULL)
-# define BIO_pending(b)          (int)BIO_ctrl(b,BIO_CTRL_PENDING,0,NULL)
-# define BIO_wpending(b)         (int)BIO_ctrl(b,BIO_CTRL_WPENDING,0,NULL)
-/* ...pending macros have inappropriate return type */
-size_t BIO_ctrl_pending(BIO *b);
-size_t BIO_ctrl_wpending(BIO *b);
-# define BIO_flush(b)            (int)BIO_ctrl(b,BIO_CTRL_FLUSH,0,NULL)
-# define BIO_get_info_callback(b,cbp) (int)BIO_ctrl(b,BIO_CTRL_GET_CALLBACK,0, \
-                                                   cbp)
-# define BIO_set_info_callback(b,cb) (int)BIO_callback_ctrl(b,BIO_CTRL_SET_CALLBACK,cb)
-
-/* For the BIO_f_buffer() type */
-# define BIO_buffer_get_num_lines(b) BIO_ctrl(b,BIO_CTRL_GET,0,NULL)
-
-/* For BIO_s_bio() */
-# define BIO_set_write_buf_size(b,size) (int)BIO_ctrl(b,BIO_C_SET_WRITE_BUF_SIZE,size,NULL)
-# define BIO_get_write_buf_size(b,size) (size_t)BIO_ctrl(b,BIO_C_GET_WRITE_BUF_SIZE,size,NULL)
-# define BIO_make_bio_pair(b1,b2)   (int)BIO_ctrl(b1,BIO_C_MAKE_BIO_PAIR,0,b2)
-# define BIO_destroy_bio_pair(b)    (int)BIO_ctrl(b,BIO_C_DESTROY_BIO_PAIR,0,NULL)
-# define BIO_shutdown_wr(b) (int)BIO_ctrl(b, BIO_C_SHUTDOWN_WR, 0, NULL)
-/* macros with inappropriate type -- but ...pending macros use int too: */
-# define BIO_get_write_guarantee(b) (int)BIO_ctrl(b,BIO_C_GET_WRITE_GUARANTEE,0,NULL)
-# define BIO_get_read_request(b)    (int)BIO_ctrl(b,BIO_C_GET_READ_REQUEST,0,NULL)
-size_t BIO_ctrl_get_write_guarantee(BIO *b);
-size_t BIO_ctrl_get_read_request(BIO *b);
-int BIO_ctrl_reset_read_request(BIO *b);
-
-/* ctrl macros for dgram */
-# define BIO_ctrl_dgram_connect(b,peer)  \
-                     (int)BIO_ctrl(b,BIO_CTRL_DGRAM_CONNECT,0, (char *)peer)
-# define BIO_ctrl_set_connected(b, state, peer) \
-         (int)BIO_ctrl(b, BIO_CTRL_DGRAM_SET_CONNECTED, state, (char *)peer)
-# define BIO_dgram_recv_timedout(b) \
-         (int)BIO_ctrl(b, BIO_CTRL_DGRAM_GET_RECV_TIMER_EXP, 0, NULL)
-# define BIO_dgram_send_timedout(b) \
-         (int)BIO_ctrl(b, BIO_CTRL_DGRAM_GET_SEND_TIMER_EXP, 0, NULL)
-# define BIO_dgram_get_peer(b,peer) \
-         (int)BIO_ctrl(b, BIO_CTRL_DGRAM_GET_PEER, 0, (char *)peer)
-# define BIO_dgram_set_peer(b,peer) \
-         (int)BIO_ctrl(b, BIO_CTRL_DGRAM_SET_PEER, 0, (char *)peer)
-# define BIO_dgram_get_mtu_overhead(b) \
-         (unsigned int)BIO_ctrl((b), BIO_CTRL_DGRAM_GET_MTU_OVERHEAD, 0, NULL)
-
-/* These two aren't currently implemented */
-/* int BIO_get_ex_num(BIO *bio); */
-/* void BIO_set_ex_free_func(BIO *bio,int idx,void (*cb)()); */
-int BIO_set_ex_data(BIO *bio, int idx, void *data);
-void *BIO_get_ex_data(BIO *bio, int idx);
-int BIO_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-                         CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);
-unsigned long BIO_number_read(BIO *bio);
-unsigned long BIO_number_written(BIO *bio);
-
-/* For BIO_f_asn1() */
-int BIO_asn1_set_prefix(BIO *b, asn1_ps_func *prefix,
-                        asn1_ps_func *prefix_free);
-int BIO_asn1_get_prefix(BIO *b, asn1_ps_func **pprefix,
-                        asn1_ps_func **pprefix_free);
-int BIO_asn1_set_suffix(BIO *b, asn1_ps_func *suffix,
-                        asn1_ps_func *suffix_free);
-int BIO_asn1_get_suffix(BIO *b, asn1_ps_func **psuffix,
-                        asn1_ps_func **psuffix_free);
-
-# ifndef OPENSSL_NO_FP_API
-BIO_METHOD *BIO_s_file(void);
-BIO *BIO_new_file(const char *filename, const char *mode);
-BIO *BIO_new_fp(FILE *stream, int close_flag);
-#  define BIO_s_file_internal    BIO_s_file
-# endif
-BIO *BIO_new(BIO_METHOD *type);
-int BIO_set(BIO *a, BIO_METHOD *type);
-int BIO_free(BIO *a);
-void BIO_vfree(BIO *a);
-int BIO_read(BIO *b, void *data, int len);
-int BIO_gets(BIO *bp, char *buf, int size);
-int BIO_write(BIO *b, const void *data, int len);
-int BIO_puts(BIO *bp, const char *buf);
-int BIO_indent(BIO *b, int indent, int max);
-long BIO_ctrl(BIO *bp, int cmd, long larg, void *parg);
-long BIO_callback_ctrl(BIO *b, int cmd,
-                       void (*fp) (struct bio_st *, int, const char *, int,
-                                   long, long));
-char *BIO_ptr_ctrl(BIO *bp, int cmd, long larg);
-long BIO_int_ctrl(BIO *bp, int cmd, long larg, int iarg);
-BIO *BIO_push(BIO *b, BIO *append);
-BIO *BIO_pop(BIO *b);
-void BIO_free_all(BIO *a);
-BIO *BIO_find_type(BIO *b, int bio_type);
-BIO *BIO_next(BIO *b);
-BIO *BIO_get_retry_BIO(BIO *bio, int *reason);
-int BIO_get_retry_reason(BIO *bio);
-BIO *BIO_dup_chain(BIO *in);
-
-int BIO_nread0(BIO *bio, char **buf);
-int BIO_nread(BIO *bio, char **buf, int num);
-int BIO_nwrite0(BIO *bio, char **buf);
-int BIO_nwrite(BIO *bio, char **buf, int num);
-
-long BIO_debug_callback(BIO *bio, int cmd, const char *argp, int argi,
-                        long argl, long ret);
-
-BIO_METHOD *BIO_s_mem(void);
-BIO *BIO_new_mem_buf(const void *buf, int len);
-BIO_METHOD *BIO_s_socket(void);
-BIO_METHOD *BIO_s_connect(void);
-BIO_METHOD *BIO_s_accept(void);
-BIO_METHOD *BIO_s_fd(void);
-# ifndef OPENSSL_SYS_OS2
-BIO_METHOD *BIO_s_log(void);
-# endif
-BIO_METHOD *BIO_s_bio(void);
-BIO_METHOD *BIO_s_null(void);
-BIO_METHOD *BIO_f_null(void);
-BIO_METHOD *BIO_f_buffer(void);
-# ifdef OPENSSL_SYS_VMS
-BIO_METHOD *BIO_f_linebuffer(void);
-# endif
-BIO_METHOD *BIO_f_nbio_test(void);
-# ifndef OPENSSL_NO_DGRAM
-BIO_METHOD *BIO_s_datagram(void);
-#  ifndef OPENSSL_NO_SCTP
-BIO_METHOD *BIO_s_datagram_sctp(void);
-#  endif
-# endif
-
-/* BIO_METHOD *BIO_f_ber(void); */
-
-int BIO_sock_should_retry(int i);
-int BIO_sock_non_fatal_error(int error);
-int BIO_dgram_non_fatal_error(int error);
-
-int BIO_fd_should_retry(int i);
-int BIO_fd_non_fatal_error(int error);
-int BIO_dump_cb(int (*cb) (const void *data, size_t len, void *u),
-                void *u, const char *s, int len);
-int BIO_dump_indent_cb(int (*cb) (const void *data, size_t len, void *u),
-                       void *u, const char *s, int len, int indent);
-int BIO_dump(BIO *b, const char *bytes, int len);
-int BIO_dump_indent(BIO *b, const char *bytes, int len, int indent);
-# ifndef OPENSSL_NO_FP_API
-int BIO_dump_fp(FILE *fp, const char *s, int len);
-int BIO_dump_indent_fp(FILE *fp, const char *s, int len, int indent);
-# endif
-int BIO_hex_string(BIO *out, int indent, int width, unsigned char *data,
-                   int datalen);
-
-struct hostent *BIO_gethostbyname(const char *name);
-/*-
- * We might want a thread-safe interface too:
- * struct hostent *BIO_gethostbyname_r(const char *name,
- *     struct hostent *result, void *buffer, size_t buflen);
- * or something similar (caller allocates a struct hostent,
- * pointed to by "result", and additional buffer space for the various
- * substructures; if the buffer does not suffice, NULL is returned
- * and an appropriate error code is set).
- */
-int BIO_sock_error(int sock);
-int BIO_socket_ioctl(int fd, long type, void *arg);
-int BIO_socket_nbio(int fd, int mode);
-int BIO_get_port(const char *str, unsigned short *port_ptr);
-int BIO_get_host_ip(const char *str, unsigned char *ip);
-int BIO_get_accept_socket(char *host_port, int mode);
-int BIO_accept(int sock, char **ip_port);
-int BIO_sock_init(void);
-void BIO_sock_cleanup(void);
-int BIO_set_tcp_ndelay(int sock, int turn_on);
-
-BIO *BIO_new_socket(int sock, int close_flag);
-BIO *BIO_new_dgram(int fd, int close_flag);
-# ifndef OPENSSL_NO_SCTP
-BIO *BIO_new_dgram_sctp(int fd, int close_flag);
-int BIO_dgram_is_sctp(BIO *bio);
-int BIO_dgram_sctp_notification_cb(BIO *b,
-                                   void (*handle_notifications) (BIO *bio,
-                                                                 void
-                                                                 *context,
-                                                                 void *buf),
-                                   void *context);
-int BIO_dgram_sctp_wait_for_dry(BIO *b);
-int BIO_dgram_sctp_msg_waiting(BIO *b);
-# endif
-BIO *BIO_new_fd(int fd, int close_flag);
-BIO *BIO_new_connect(const char *host_port);
-BIO *BIO_new_accept(const char *host_port);
-
-int BIO_new_bio_pair(BIO **bio1, size_t writebuf1,
-                     BIO **bio2, size_t writebuf2);
-/*
- * If successful, returns 1 and in *bio1, *bio2 two BIO pair endpoints.
- * Otherwise returns 0 and sets *bio1 and *bio2 to NULL. Size 0 uses default
- * value.
- */
-
-void BIO_copy_next_retry(BIO *b);
-
-/*
- * long BIO_ghbn_ctrl(int cmd,int iarg,char *parg);
- */
-
-# ifdef __GNUC__
-#  define __bio_h__attr__ __attribute__
-# else
-#  define __bio_h__attr__(x)
-# endif
-int BIO_printf(BIO *bio, const char *format, ...)
-__bio_h__attr__((__format__(__printf__, 2, 3)));
-int BIO_vprintf(BIO *bio, const char *format, va_list args)
-__bio_h__attr__((__format__(__printf__, 2, 0)));
-int BIO_snprintf(char *buf, size_t n, const char *format, ...)
-__bio_h__attr__((__format__(__printf__, 3, 4)));
-int BIO_vsnprintf(char *buf, size_t n, const char *format, va_list args)
-__bio_h__attr__((__format__(__printf__, 3, 0)));
-# undef __bio_h__attr__
-
-/* BEGIN ERROR CODES */
-/*
- * The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_BIO_strings(void);
-
-/* Error codes for the BIO functions. */
-
-/* Function codes. */
-# define BIO_F_ACPT_STATE                                 100
-# define BIO_F_BIO_ACCEPT                                 101
-# define BIO_F_BIO_BER_GET_HEADER                         102
-# define BIO_F_BIO_CALLBACK_CTRL                          131
-# define BIO_F_BIO_CTRL                                   103
-# define BIO_F_BIO_GETHOSTBYNAME                          120
-# define BIO_F_BIO_GETS                                   104
-# define BIO_F_BIO_GET_ACCEPT_SOCKET                      105
-# define BIO_F_BIO_GET_HOST_IP                            106
-# define BIO_F_BIO_GET_PORT                               107
-# define BIO_F_BIO_MAKE_PAIR                              121
-# define BIO_F_BIO_NEW                                    108
-# define BIO_F_BIO_NEW_FILE                               109
-# define BIO_F_BIO_NEW_MEM_BUF                            126
-# define BIO_F_BIO_NREAD                                  123
-# define BIO_F_BIO_NREAD0                                 124
-# define BIO_F_BIO_NWRITE                                 125
-# define BIO_F_BIO_NWRITE0                                122
-# define BIO_F_BIO_PUTS                                   110
-# define BIO_F_BIO_READ                                   111
-# define BIO_F_BIO_SOCK_INIT                              112
-# define BIO_F_BIO_WRITE                                  113
-# define BIO_F_BUFFER_CTRL                                114
-# define BIO_F_CONN_CTRL                                  127
-# define BIO_F_CONN_STATE                                 115
-# define BIO_F_DGRAM_SCTP_READ                            132
-# define BIO_F_DGRAM_SCTP_WRITE                           133
-# define BIO_F_FILE_CTRL                                  116
-# define BIO_F_FILE_READ                                  130
-# define BIO_F_LINEBUFFER_CTRL                            129
-# define BIO_F_MEM_READ                                   128
-# define BIO_F_MEM_WRITE                                  117
-# define BIO_F_SSL_NEW                                    118
-# define BIO_F_WSASTARTUP                                 119
-
-/* Reason codes. */
-# define BIO_R_ACCEPT_ERROR                               100
-# define BIO_R_BAD_FOPEN_MODE                             101
-# define BIO_R_BAD_HOSTNAME_LOOKUP                        102
-# define BIO_R_BROKEN_PIPE                                124
-# define BIO_R_CONNECT_ERROR                              103
-# define BIO_R_EOF_ON_MEMORY_BIO                          127
-# define BIO_R_ERROR_SETTING_NBIO                         104
-# define BIO_R_ERROR_SETTING_NBIO_ON_ACCEPTED_SOCKET      105
-# define BIO_R_ERROR_SETTING_NBIO_ON_ACCEPT_SOCKET        106
-# define BIO_R_GETHOSTBYNAME_ADDR_IS_NOT_AF_INET          107
-# define BIO_R_INVALID_ARGUMENT                           125
-# define BIO_R_INVALID_IP_ADDRESS                         108
-# define BIO_R_IN_USE                                     123
-# define BIO_R_KEEPALIVE                                  109
-# define BIO_R_NBIO_CONNECT_ERROR                         110
-# define BIO_R_NO_ACCEPT_PORT_SPECIFIED                   111
-# define BIO_R_NO_HOSTNAME_SPECIFIED                      112
-# define BIO_R_NO_PORT_DEFINED                            113
-# define BIO_R_NO_PORT_SPECIFIED                          114
-# define BIO_R_NO_SUCH_FILE                               128
-# define BIO_R_NULL_PARAMETER                             115
-# define BIO_R_TAG_MISMATCH                               116
-# define BIO_R_UNABLE_TO_BIND_SOCKET                      117
-# define BIO_R_UNABLE_TO_CREATE_SOCKET                    118
-# define BIO_R_UNABLE_TO_LISTEN_SOCKET                    119
-# define BIO_R_UNINITIALIZED                              120
-# define BIO_R_UNSUPPORTED_METHOD                         121
-# define BIO_R_WRITE_TO_READ_ONLY_BIO                     126
-# define BIO_R_WSASTARTUP                                 122
-
-#ifdef  __cplusplus
-}
-#endif
-#endif

deps/openssl/openssl/include/openssl/blowfish.h

@@ -1,130 +0,0 @@
-/* crypto/bf/blowfish.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_BLOWFISH_H
-# define HEADER_BLOWFISH_H
-
-# include <openssl/e_os2.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-# ifdef OPENSSL_NO_BF
-#  error BF is disabled.
-# endif
-
-# define BF_ENCRYPT      1
-# define BF_DECRYPT      0
-
-/*-
- * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- * ! BF_LONG has to be at least 32 bits wide. If it's wider, then !
- * ! BF_LONG_LOG2 has to be defined along.                        !
- * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- */
-
-# if defined(__LP32__)
-#  define BF_LONG unsigned long
-# elif defined(OPENSSL_SYS_CRAY) || defined(__ILP64__)
-#  define BF_LONG unsigned long
-#  define BF_LONG_LOG2 3
-/*
- * _CRAY note. I could declare short, but I have no idea what impact
- * does it have on performance on none-T3E machines. I could declare
- * int, but at least on C90 sizeof(int) can be chosen at compile time.
- * So I've chosen long...
- *                                      <appro@fy.chalmers.se>
- */
-# else
-#  define BF_LONG unsigned int
-# endif
-
-# define BF_ROUNDS       16
-# define BF_BLOCK        8
-
-typedef struct bf_key_st {
-    BF_LONG P[BF_ROUNDS + 2];
-    BF_LONG S[4 * 256];
-} BF_KEY;
-
-# ifdef OPENSSL_FIPS
-void private_BF_set_key(BF_KEY *key, int len, const unsigned char *data);
-# endif
-void BF_set_key(BF_KEY *key, int len, const unsigned char *data);
-
-void BF_encrypt(BF_LONG *data, const BF_KEY *key);
-void BF_decrypt(BF_LONG *data, const BF_KEY *key);
-
-void BF_ecb_encrypt(const unsigned char *in, unsigned char *out,
-                    const BF_KEY *key, int enc);
-void BF_cbc_encrypt(const unsigned char *in, unsigned char *out, long length,
-                    const BF_KEY *schedule, unsigned char *ivec, int enc);
-void BF_cfb64_encrypt(const unsigned char *in, unsigned char *out,
-                      long length, const BF_KEY *schedule,
-                      unsigned char *ivec, int *num, int enc);
-void BF_ofb64_encrypt(const unsigned char *in, unsigned char *out,
-                      long length, const BF_KEY *schedule,
-                      unsigned char *ivec, int *num);
-const char *BF_options(void);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif

deps/openssl/openssl/include/openssl/bn.h

@@ -1,951 +0,0 @@
-/* crypto/bn/bn.h */
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the Eric Young open source
- * license provided above.
- *
- * The binary polynomial arithmetic software is originally written by
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
- *
- */
-
-#ifndef HEADER_BN_H
-# define HEADER_BN_H
-
-# include <limits.h>
-# include <openssl/e_os2.h>
-# ifndef OPENSSL_NO_FP_API
-#  include <stdio.h>            /* FILE */
-# endif
-# include <openssl/ossl_typ.h>
-# include <openssl/crypto.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/*
- * These preprocessor symbols control various aspects of the bignum headers
- * and library code. They're not defined by any "normal" configuration, as
- * they are intended for development and testing purposes. NB: defining all
- * three can be useful for debugging application code as well as openssl
- * itself. BN_DEBUG - turn on various debugging alterations to the bignum
- * code BN_DEBUG_RAND - uses random poisoning of unused words to trip up
- * mismanagement of bignum internals. You must also define BN_DEBUG.
- */
-/* #define BN_DEBUG */
-/* #define BN_DEBUG_RAND */
-
-# ifndef OPENSSL_SMALL_FOOTPRINT
-#  define BN_MUL_COMBA
-#  define BN_SQR_COMBA
-#  define BN_RECURSION
-# endif
-
-/*
- * This next option uses the C libraries (2 word)/(1 word) function. If it is
- * not defined, I use my C version (which is slower). The reason for this
- * flag is that when the particular C compiler library routine is used, and
- * the library is linked with a different compiler, the library is missing.
- * This mostly happens when the library is built with gcc and then linked
- * using normal cc.  This would be a common occurrence because gcc normally
- * produces code that is 2 times faster than system compilers for the big
- * number stuff. For machines with only one compiler (or shared libraries),
- * this should be on.  Again this in only really a problem on machines using
- * "long long's", are 32bit, and are not using my assembler code.
- */
-# if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WINDOWS) || \
-    defined(OPENSSL_SYS_WIN32) || defined(linux)
-#  ifndef BN_DIV2W
-#   define BN_DIV2W
-#  endif
-# endif
-
-/*
- * assuming long is 64bit - this is the DEC Alpha unsigned long long is only
- * 64 bits :-(, don't define BN_LLONG for the DEC Alpha
- */
-# ifdef SIXTY_FOUR_BIT_LONG
-#  define BN_ULLONG       unsigned long long
-#  define BN_ULONG        unsigned long
-#  define BN_LONG         long
-#  define BN_BITS         128
-#  define BN_BYTES        8
-#  define BN_BITS2        64
-#  define BN_BITS4        32
-#  define BN_MASK         (0xffffffffffffffffffffffffffffffffLL)
-#  define BN_MASK2        (0xffffffffffffffffL)
-#  define BN_MASK2l       (0xffffffffL)
-#  define BN_MASK2h       (0xffffffff00000000L)
-#  define BN_MASK2h1      (0xffffffff80000000L)
-#  define BN_TBIT         (0x8000000000000000L)
-#  define BN_DEC_CONV     (10000000000000000000UL)
-#  define BN_DEC_FMT1     "%lu"
-#  define BN_DEC_FMT2     "%019lu"
-#  define BN_DEC_NUM      19
-#  define BN_HEX_FMT1     "%lX"
-#  define BN_HEX_FMT2     "%016lX"
-# endif
-
-/*
- * This is where the long long data type is 64 bits, but long is 32. For
- * machines where there are 64bit registers, this is the mode to use. IRIX,
- * on R4000 and above should use this mode, along with the relevant assembler
- * code :-).  Do NOT define BN_LLONG.
- */
-# ifdef SIXTY_FOUR_BIT
-#  undef BN_LLONG
-#  undef BN_ULLONG
-#  define BN_ULONG        unsigned long long
-#  define BN_LONG         long long
-#  define BN_BITS         128
-#  define BN_BYTES        8
-#  define BN_BITS2        64
-#  define BN_BITS4        32
-#  define BN_MASK2        (0xffffffffffffffffLL)
-#  define BN_MASK2l       (0xffffffffL)
-#  define BN_MASK2h       (0xffffffff00000000LL)
-#  define BN_MASK2h1      (0xffffffff80000000LL)
-#  define BN_TBIT         (0x8000000000000000LL)
-#  define BN_DEC_CONV     (10000000000000000000ULL)
-#  define BN_DEC_FMT1     "%llu"
-#  define BN_DEC_FMT2     "%019llu"
-#  define BN_DEC_NUM      19
-#  define BN_HEX_FMT1     "%llX"
-#  define BN_HEX_FMT2     "%016llX"
-# endif
-
-# ifdef THIRTY_TWO_BIT
-#  ifdef BN_LLONG
-#   if defined(_WIN32) && !defined(__GNUC__)
-#    define BN_ULLONG     unsigned __int64
-#    define BN_MASK       (0xffffffffffffffffI64)
-#   else
-#    define BN_ULLONG     unsigned long long
-#    define BN_MASK       (0xffffffffffffffffLL)
-#   endif
-#  endif
-#  define BN_ULONG        unsigned int
-#  define BN_LONG         int
-#  define BN_BITS         64
-#  define BN_BYTES        4
-#  define BN_BITS2        32
-#  define BN_BITS4        16
-#  define BN_MASK2        (0xffffffffL)
-#  define BN_MASK2l       (0xffff)
-#  define BN_MASK2h1      (0xffff8000L)
-#  define BN_MASK2h       (0xffff0000L)
-#  define BN_TBIT         (0x80000000L)
-#  define BN_DEC_CONV     (1000000000L)
-#  define BN_DEC_FMT1     "%u"
-#  define BN_DEC_FMT2     "%09u"
-#  define BN_DEC_NUM      9
-#  define BN_HEX_FMT1     "%X"
-#  define BN_HEX_FMT2     "%08X"
-# endif
-
-# define BN_DEFAULT_BITS 1280
-
-# define BN_FLG_MALLOCED         0x01
-# define BN_FLG_STATIC_DATA      0x02
-
-/*
- * avoid leaking exponent information through timing,
- * BN_mod_exp_mont() will call BN_mod_exp_mont_consttime,
- * BN_div() will call BN_div_no_branch,
- * BN_mod_inverse() will call BN_mod_inverse_no_branch.
- */
-# define BN_FLG_CONSTTIME        0x04
-
-# ifdef OPENSSL_NO_DEPRECATED
-/* deprecated name for the flag */
-#  define BN_FLG_EXP_CONSTTIME BN_FLG_CONSTTIME
-/*
- * avoid leaking exponent information through timings
- * (BN_mod_exp_mont() will call BN_mod_exp_mont_consttime)
- */
-# endif
-
-# ifndef OPENSSL_NO_DEPRECATED
-#  define BN_FLG_FREE             0x8000
-                                       /* used for debuging */
-# endif
-# define BN_set_flags(b,n)       ((b)->flags|=(n))
-# define BN_get_flags(b,n)       ((b)->flags&(n))
-
-/*
- * get a clone of a BIGNUM with changed flags, for *temporary* use only (the
- * two BIGNUMs cannot not be used in parallel!)
- */
-# define BN_with_flags(dest,b,n)  ((dest)->d=(b)->d, \
-                                  (dest)->top=(b)->top, \
-                                  (dest)->dmax=(b)->dmax, \
-                                  (dest)->neg=(b)->neg, \
-                                  (dest)->flags=(((dest)->flags & BN_FLG_MALLOCED) \
-                                                 |  ((b)->flags & ~BN_FLG_MALLOCED) \
-                                                 |  BN_FLG_STATIC_DATA \
-                                                 |  (n)))
-
-/* Already declared in ossl_typ.h */
-# if 0
-typedef struct bignum_st BIGNUM;
-/* Used for temp variables (declaration hidden in bn_lcl.h) */
-typedef struct bignum_ctx BN_CTX;
-typedef struct bn_blinding_st BN_BLINDING;
-typedef struct bn_mont_ctx_st BN_MONT_CTX;
-typedef struct bn_recp_ctx_st BN_RECP_CTX;
-typedef struct bn_gencb_st BN_GENCB;
-# endif
-
-struct bignum_st {
-    BN_ULONG *d;                /* Pointer to an array of 'BN_BITS2' bit
-                                 * chunks. */
-    int top;                    /* Index of last used d +1. */
-    /* The next are internal book keeping for bn_expand. */
-    int dmax;                   /* Size of the d array. */
-    int neg;                    /* one if the number is negative */
-    int flags;
-};
-
-/* Used for montgomery multiplication */
-struct bn_mont_ctx_st {
-    int ri;                     /* number of bits in R */
-    BIGNUM RR;                  /* used to convert to montgomery form */
-    BIGNUM N;                   /* The modulus */
-    BIGNUM Ni;                  /* R*(1/R mod N) - N*Ni = 1 (Ni is only
-                                 * stored for bignum algorithm) */
-    BN_ULONG n0[2];             /* least significant word(s) of Ni; (type
-                                 * changed with 0.9.9, was "BN_ULONG n0;"
-                                 * before) */
-    int flags;
-};
-
-/*
- * Used for reciprocal division/mod functions It cannot be shared between
- * threads
- */
-struct bn_recp_ctx_st {
-    BIGNUM N;                   /* the divisor */
-    BIGNUM Nr;                  /* the reciprocal */
-    int num_bits;
-    int shift;
-    int flags;
-};
-
-/* Used for slow "generation" functions. */
-struct bn_gencb_st {
-    unsigned int ver;           /* To handle binary (in)compatibility */
-    void *arg;                  /* callback-specific data */
-    union {
-        /* if(ver==1) - handles old style callbacks */
-        void (*cb_1) (int, int, void *);
-        /* if(ver==2) - new callback style */
-        int (*cb_2) (int, int, BN_GENCB *);
-    } cb;
-};
-/* Wrapper function to make using BN_GENCB easier,  */
-int BN_GENCB_call(BN_GENCB *cb, int a, int b);
-/* Macro to populate a BN_GENCB structure with an "old"-style callback */
-# define BN_GENCB_set_old(gencb, callback, cb_arg) { \
-                BN_GENCB *tmp_gencb = (gencb); \
-                tmp_gencb->ver = 1; \
-                tmp_gencb->arg = (cb_arg); \
-                tmp_gencb->cb.cb_1 = (callback); }
-/* Macro to populate a BN_GENCB structure with a "new"-style callback */
-# define BN_GENCB_set(gencb, callback, cb_arg) { \
-                BN_GENCB *tmp_gencb = (gencb); \
-                tmp_gencb->ver = 2; \
-                tmp_gencb->arg = (cb_arg); \
-                tmp_gencb->cb.cb_2 = (callback); }
-
-# define BN_prime_checks 0      /* default: select number of iterations based
-                                 * on the size of the number */
-
-/*
- * number of Miller-Rabin iterations for an error rate of less than 2^-80 for
- * random 'b'-bit input, b >= 100 (taken from table 4.4 in the Handbook of
- * Applied Cryptography [Menezes, van Oorschot, Vanstone; CRC Press 1996];
- * original paper: Damgaard, Landrock, Pomerance: Average case error
- * estimates for the strong probable prime test. -- Math. Comp. 61 (1993)
- * 177-194)
- */
-# define BN_prime_checks_for_size(b) ((b) >= 1300 ?  2 : \
-                                (b) >=  850 ?  3 : \
-                                (b) >=  650 ?  4 : \
-                                (b) >=  550 ?  5 : \
-                                (b) >=  450 ?  6 : \
-                                (b) >=  400 ?  7 : \
-                                (b) >=  350 ?  8 : \
-                                (b) >=  300 ?  9 : \
-                                (b) >=  250 ? 12 : \
-                                (b) >=  200 ? 15 : \
-                                (b) >=  150 ? 18 : \
-                                /* b >= 100 */ 27)
-
-# define BN_num_bytes(a) ((BN_num_bits(a)+7)/8)
-
-/* Note that BN_abs_is_word didn't work reliably for w == 0 until 0.9.8 */
-# define BN_abs_is_word(a,w) ((((a)->top == 1) && ((a)->d[0] == (BN_ULONG)(w))) || \
-                                (((w) == 0) && ((a)->top == 0)))
-# define BN_is_zero(a)       ((a)->top == 0)
-# define BN_is_one(a)        (BN_abs_is_word((a),1) && !(a)->neg)
-# define BN_is_word(a,w)     (BN_abs_is_word((a),(w)) && (!(w) || !(a)->neg))
-# define BN_is_odd(a)        (((a)->top > 0) && ((a)->d[0] & 1))
-
-# define BN_one(a)       (BN_set_word((a),1))
-# define BN_zero_ex(a) \
-        do { \
-                BIGNUM *_tmp_bn = (a); \
-                _tmp_bn->top = 0; \
-                _tmp_bn->neg = 0; \
-        } while(0)
-# ifdef OPENSSL_NO_DEPRECATED
-#  define BN_zero(a)      BN_zero_ex(a)
-# else
-#  define BN_zero(a)      (BN_set_word((a),0))
-# endif
-
-const BIGNUM *BN_value_one(void);
-char *BN_options(void);
-BN_CTX *BN_CTX_new(void);
-# ifndef OPENSSL_NO_DEPRECATED
-void BN_CTX_init(BN_CTX *c);
-# endif
-void BN_CTX_free(BN_CTX *c);
-void BN_CTX_start(BN_CTX *ctx);
-BIGNUM *BN_CTX_get(BN_CTX *ctx);
-void BN_CTX_end(BN_CTX *ctx);
-int BN_rand(BIGNUM *rnd, int bits, int top, int bottom);
-int BN_pseudo_rand(BIGNUM *rnd, int bits, int top, int bottom);
-int BN_rand_range(BIGNUM *rnd, const BIGNUM *range);
-int BN_pseudo_rand_range(BIGNUM *rnd, const BIGNUM *range);
-int BN_num_bits(const BIGNUM *a);
-int BN_num_bits_word(BN_ULONG);
-BIGNUM *BN_new(void);
-void BN_init(BIGNUM *);
-void BN_clear_free(BIGNUM *a);
-BIGNUM *BN_copy(BIGNUM *a, const BIGNUM *b);
-void BN_swap(BIGNUM *a, BIGNUM *b);
-BIGNUM *BN_bin2bn(const unsigned char *s, int len, BIGNUM *ret);
-int BN_bn2bin(const BIGNUM *a, unsigned char *to);
-BIGNUM *BN_mpi2bn(const unsigned char *s, int len, BIGNUM *ret);
-int BN_bn2mpi(const BIGNUM *a, unsigned char *to);
-int BN_sub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
-int BN_usub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
-int BN_uadd(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
-int BN_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
-int BN_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx);
-int BN_sqr(BIGNUM *r, const BIGNUM *a, BN_CTX *ctx);
-/** BN_set_negative sets sign of a BIGNUM
- * \param  b  pointer to the BIGNUM object
- * \param  n  0 if the BIGNUM b should be positive and a value != 0 otherwise
- */
-void BN_set_negative(BIGNUM *b, int n);
-/** BN_is_negative returns 1 if the BIGNUM is negative
- * \param  a  pointer to the BIGNUM object
- * \return 1 if a < 0 and 0 otherwise
- */
-# define BN_is_negative(a) ((a)->neg != 0)
-
-int BN_div(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m, const BIGNUM *d,
-           BN_CTX *ctx);
-# define BN_mod(rem,m,d,ctx) BN_div(NULL,(rem),(m),(d),(ctx))
-int BN_nnmod(BIGNUM *r, const BIGNUM *m, const BIGNUM *d, BN_CTX *ctx);
-int BN_mod_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m,
-               BN_CTX *ctx);
-int BN_mod_add_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-                     const BIGNUM *m);
-int BN_mod_sub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m,
-               BN_CTX *ctx);
-int BN_mod_sub_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-                     const BIGNUM *m);
-int BN_mod_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m,
-               BN_CTX *ctx);
-int BN_mod_sqr(BIGNUM *r, const BIGNUM *a, const BIGNUM *m, BN_CTX *ctx);
-int BN_mod_lshift1(BIGNUM *r, const BIGNUM *a, const BIGNUM *m, BN_CTX *ctx);
-int BN_mod_lshift1_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *m);
-int BN_mod_lshift(BIGNUM *r, const BIGNUM *a, int n, const BIGNUM *m,
-                  BN_CTX *ctx);
-int BN_mod_lshift_quick(BIGNUM *r, const BIGNUM *a, int n, const BIGNUM *m);
-
-BN_ULONG BN_mod_word(const BIGNUM *a, BN_ULONG w);
-BN_ULONG BN_div_word(BIGNUM *a, BN_ULONG w);
-int BN_mul_word(BIGNUM *a, BN_ULONG w);
-int BN_add_word(BIGNUM *a, BN_ULONG w);
-int BN_sub_word(BIGNUM *a, BN_ULONG w);
-int BN_set_word(BIGNUM *a, BN_ULONG w);
-BN_ULONG BN_get_word(const BIGNUM *a);
-
-int BN_cmp(const BIGNUM *a, const BIGNUM *b);
-void BN_free(BIGNUM *a);
-int BN_is_bit_set(const BIGNUM *a, int n);
-int BN_lshift(BIGNUM *r, const BIGNUM *a, int n);
-int BN_lshift1(BIGNUM *r, const BIGNUM *a);
-int BN_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx);
-
-int BN_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-               const BIGNUM *m, BN_CTX *ctx);
-int BN_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-                    const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-int BN_mod_exp_mont_consttime(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p,
-                              const BIGNUM *m, BN_CTX *ctx,
-                              BN_MONT_CTX *in_mont);
-int BN_mod_exp_mont_word(BIGNUM *r, BN_ULONG a, const BIGNUM *p,
-                         const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-int BN_mod_exp2_mont(BIGNUM *r, const BIGNUM *a1, const BIGNUM *p1,
-                     const BIGNUM *a2, const BIGNUM *p2, const BIGNUM *m,
-                     BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-int BN_mod_exp_simple(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-                      const BIGNUM *m, BN_CTX *ctx);
-
-int BN_mask_bits(BIGNUM *a, int n);
-# ifndef OPENSSL_NO_FP_API
-int BN_print_fp(FILE *fp, const BIGNUM *a);
-# endif
-# ifdef HEADER_BIO_H
-int BN_print(BIO *fp, const BIGNUM *a);
-# else
-int BN_print(void *fp, const BIGNUM *a);
-# endif
-int BN_reciprocal(BIGNUM *r, const BIGNUM *m, int len, BN_CTX *ctx);
-int BN_rshift(BIGNUM *r, const BIGNUM *a, int n);
-int BN_rshift1(BIGNUM *r, const BIGNUM *a);
-void BN_clear(BIGNUM *a);
-BIGNUM *BN_dup(const BIGNUM *a);
-int BN_ucmp(const BIGNUM *a, const BIGNUM *b);
-int BN_set_bit(BIGNUM *a, int n);
-int BN_clear_bit(BIGNUM *a, int n);
-char *BN_bn2hex(const BIGNUM *a);
-char *BN_bn2dec(const BIGNUM *a);
-int BN_hex2bn(BIGNUM **a, const char *str);
-int BN_dec2bn(BIGNUM **a, const char *str);
-int BN_asc2bn(BIGNUM **a, const char *str);
-int BN_gcd(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx);
-int BN_kronecker(const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx); /* returns
-                                                                  * -2 for
-                                                                  * error */
-BIGNUM *BN_mod_inverse(BIGNUM *ret,
-                       const BIGNUM *a, const BIGNUM *n, BN_CTX *ctx);
-BIGNUM *BN_mod_sqrt(BIGNUM *ret,
-                    const BIGNUM *a, const BIGNUM *n, BN_CTX *ctx);
-
-void BN_consttime_swap(BN_ULONG swap, BIGNUM *a, BIGNUM *b, int nwords);
-
-/* Deprecated versions */
-# ifndef OPENSSL_NO_DEPRECATED
-BIGNUM *BN_generate_prime(BIGNUM *ret, int bits, int safe,
-                          const BIGNUM *add, const BIGNUM *rem,
-                          void (*callback) (int, int, void *), void *cb_arg);
-int BN_is_prime(const BIGNUM *p, int nchecks,
-                void (*callback) (int, int, void *),
-                BN_CTX *ctx, void *cb_arg);
-int BN_is_prime_fasttest(const BIGNUM *p, int nchecks,
-                         void (*callback) (int, int, void *), BN_CTX *ctx,
-                         void *cb_arg, int do_trial_division);
-# endif                         /* !defined(OPENSSL_NO_DEPRECATED) */
-
-/* Newer versions */
-int BN_generate_prime_ex(BIGNUM *ret, int bits, int safe, const BIGNUM *add,
-                         const BIGNUM *rem, BN_GENCB *cb);
-int BN_is_prime_ex(const BIGNUM *p, int nchecks, BN_CTX *ctx, BN_GENCB *cb);
-int BN_is_prime_fasttest_ex(const BIGNUM *p, int nchecks, BN_CTX *ctx,
-                            int do_trial_division, BN_GENCB *cb);
-
-int BN_X931_generate_Xpq(BIGNUM *Xp, BIGNUM *Xq, int nbits, BN_CTX *ctx);
-
-int BN_X931_derive_prime_ex(BIGNUM *p, BIGNUM *p1, BIGNUM *p2,
-                            const BIGNUM *Xp, const BIGNUM *Xp1,
-                            const BIGNUM *Xp2, const BIGNUM *e, BN_CTX *ctx,
-                            BN_GENCB *cb);
-int BN_X931_generate_prime_ex(BIGNUM *p, BIGNUM *p1, BIGNUM *p2, BIGNUM *Xp1,
-                              BIGNUM *Xp2, const BIGNUM *Xp, const BIGNUM *e,
-                              BN_CTX *ctx, BN_GENCB *cb);
-
-BN_MONT_CTX *BN_MONT_CTX_new(void);
-void BN_MONT_CTX_init(BN_MONT_CTX *ctx);
-int BN_mod_mul_montgomery(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-                          BN_MONT_CTX *mont, BN_CTX *ctx);
-# define BN_to_montgomery(r,a,mont,ctx)  BN_mod_mul_montgomery(\
-        (r),(a),&((mont)->RR),(mont),(ctx))
-int BN_from_montgomery(BIGNUM *r, const BIGNUM *a,
-                       BN_MONT_CTX *mont, BN_CTX *ctx);
-void BN_MONT_CTX_free(BN_MONT_CTX *mont);
-int BN_MONT_CTX_set(BN_MONT_CTX *mont, const BIGNUM *mod, BN_CTX *ctx);
-BN_MONT_CTX *BN_MONT_CTX_copy(BN_MONT_CTX *to, BN_MONT_CTX *from);
-BN_MONT_CTX *BN_MONT_CTX_set_locked(BN_MONT_CTX **pmont, int lock,
-                                    const BIGNUM *mod, BN_CTX *ctx);
-
-/* BN_BLINDING flags */
-# define BN_BLINDING_NO_UPDATE   0x00000001
-# define BN_BLINDING_NO_RECREATE 0x00000002
-
-BN_BLINDING *BN_BLINDING_new(const BIGNUM *A, const BIGNUM *Ai, BIGNUM *mod);
-void BN_BLINDING_free(BN_BLINDING *b);
-int BN_BLINDING_update(BN_BLINDING *b, BN_CTX *ctx);
-int BN_BLINDING_convert(BIGNUM *n, BN_BLINDING *b, BN_CTX *ctx);
-int BN_BLINDING_invert(BIGNUM *n, BN_BLINDING *b, BN_CTX *ctx);
-int BN_BLINDING_convert_ex(BIGNUM *n, BIGNUM *r, BN_BLINDING *b, BN_CTX *);
-int BN_BLINDING_invert_ex(BIGNUM *n, const BIGNUM *r, BN_BLINDING *b,
-                          BN_CTX *);
-# ifndef OPENSSL_NO_DEPRECATED
-unsigned long BN_BLINDING_get_thread_id(const BN_BLINDING *);
-void BN_BLINDING_set_thread_id(BN_BLINDING *, unsigned long);
-# endif
-CRYPTO_THREADID *BN_BLINDING_thread_id(BN_BLINDING *);
-unsigned long BN_BLINDING_get_flags(const BN_BLINDING *);
-void BN_BLINDING_set_flags(BN_BLINDING *, unsigned long);
-BN_BLINDING *BN_BLINDING_create_param(BN_BLINDING *b,
-                                      const BIGNUM *e, BIGNUM *m, BN_CTX *ctx,
-                                      int (*bn_mod_exp) (BIGNUM *r,
-                                                         const BIGNUM *a,
-                                                         const BIGNUM *p,
-                                                         const BIGNUM *m,
-                                                         BN_CTX *ctx,
-                                                         BN_MONT_CTX *m_ctx),
-                                      BN_MONT_CTX *m_ctx);
-
-# ifndef OPENSSL_NO_DEPRECATED
-void BN_set_params(int mul, int high, int low, int mont);
-int BN_get_params(int which);   /* 0, mul, 1 high, 2 low, 3 mont */
-# endif
-
-void BN_RECP_CTX_init(BN_RECP_CTX *recp);
-BN_RECP_CTX *BN_RECP_CTX_new(void);
-void BN_RECP_CTX_free(BN_RECP_CTX *recp);
-int BN_RECP_CTX_set(BN_RECP_CTX *recp, const BIGNUM *rdiv, BN_CTX *ctx);
-int BN_mod_mul_reciprocal(BIGNUM *r, const BIGNUM *x, const BIGNUM *y,
-                          BN_RECP_CTX *recp, BN_CTX *ctx);
-int BN_mod_exp_recp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-                    const BIGNUM *m, BN_CTX *ctx);
-int BN_div_recp(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m,
-                BN_RECP_CTX *recp, BN_CTX *ctx);
-
-# ifndef OPENSSL_NO_EC2M
-
-/*
- * Functions for arithmetic over binary polynomials represented by BIGNUMs.
- * The BIGNUM::neg property of BIGNUMs representing binary polynomials is
- * ignored. Note that input arguments are not const so that their bit arrays
- * can be expanded to the appropriate size if needed.
- */
-
-/*
- * r = a + b
- */
-int BN_GF2m_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
-#  define BN_GF2m_sub(r, a, b) BN_GF2m_add(r, a, b)
-/*
- * r=a mod p
- */
-int BN_GF2m_mod(BIGNUM *r, const BIGNUM *a, const BIGNUM *p);
-/* r = (a * b) mod p */
-int BN_GF2m_mod_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-                    const BIGNUM *p, BN_CTX *ctx);
-/* r = (a * a) mod p */
-int BN_GF2m_mod_sqr(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx);
-/* r = (1 / b) mod p */
-int BN_GF2m_mod_inv(BIGNUM *r, const BIGNUM *b, const BIGNUM *p, BN_CTX *ctx);
-/* r = (a / b) mod p */
-int BN_GF2m_mod_div(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-                    const BIGNUM *p, BN_CTX *ctx);
-/* r = (a ^ b) mod p */
-int BN_GF2m_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-                    const BIGNUM *p, BN_CTX *ctx);
-/* r = sqrt(a) mod p */
-int BN_GF2m_mod_sqrt(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-                     BN_CTX *ctx);
-/* r^2 + r = a mod p */
-int BN_GF2m_mod_solve_quad(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-                           BN_CTX *ctx);
-#  define BN_GF2m_cmp(a, b) BN_ucmp((a), (b))
-/*-
- * Some functions allow for representation of the irreducible polynomials
- * as an unsigned int[], say p.  The irreducible f(t) is then of the form:
- *     t^p[0] + t^p[1] + ... + t^p[k]
- * where m = p[0] > p[1] > ... > p[k] = 0.
- */
-/* r = a mod p */
-int BN_GF2m_mod_arr(BIGNUM *r, const BIGNUM *a, const int p[]);
-/* r = (a * b) mod p */
-int BN_GF2m_mod_mul_arr(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-                        const int p[], BN_CTX *ctx);
-/* r = (a * a) mod p */
-int BN_GF2m_mod_sqr_arr(BIGNUM *r, const BIGNUM *a, const int p[],
-                        BN_CTX *ctx);
-/* r = (1 / b) mod p */
-int BN_GF2m_mod_inv_arr(BIGNUM *r, const BIGNUM *b, const int p[],
-                        BN_CTX *ctx);
-/* r = (a / b) mod p */
-int BN_GF2m_mod_div_arr(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-                        const int p[], BN_CTX *ctx);
-/* r = (a ^ b) mod p */
-int BN_GF2m_mod_exp_arr(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-                        const int p[], BN_CTX *ctx);
-/* r = sqrt(a) mod p */
-int BN_GF2m_mod_sqrt_arr(BIGNUM *r, const BIGNUM *a,
-                         const int p[], BN_CTX *ctx);
-/* r^2 + r = a mod p */
-int BN_GF2m_mod_solve_quad_arr(BIGNUM *r, const BIGNUM *a,
-                               const int p[], BN_CTX *ctx);
-int BN_GF2m_poly2arr(const BIGNUM *a, int p[], int max);
-int BN_GF2m_arr2poly(const int p[], BIGNUM *a);
-
-# endif
-
-/*
- * faster mod functions for the 'NIST primes' 0 <= a < p^2
- */
-int BN_nist_mod_192(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx);
-int BN_nist_mod_224(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx);
-int BN_nist_mod_256(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx);
-int BN_nist_mod_384(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx);
-int BN_nist_mod_521(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx);
-
-const BIGNUM *BN_get0_nist_prime_192(void);
-const BIGNUM *BN_get0_nist_prime_224(void);
-const BIGNUM *BN_get0_nist_prime_256(void);
-const BIGNUM *BN_get0_nist_prime_384(void);
-const BIGNUM *BN_get0_nist_prime_521(void);
-
-/* library internal functions */
-
-# define bn_expand(a,bits) \
-    ( \
-        bits > (INT_MAX - BN_BITS2 + 1) ? \
-            NULL \
-        : \
-            (((bits+BN_BITS2-1)/BN_BITS2) <= (a)->dmax) ? \
-                (a) \
-            : \
-                bn_expand2((a),(bits+BN_BITS2-1)/BN_BITS2) \
-    )
-
-# define bn_wexpand(a,words) (((words) <= (a)->dmax)?(a):bn_expand2((a),(words)))
-BIGNUM *bn_expand2(BIGNUM *a, int words);
-# ifndef OPENSSL_NO_DEPRECATED
-BIGNUM *bn_dup_expand(const BIGNUM *a, int words); /* unused */
-# endif
-
-/*-
- * Bignum consistency macros
- * There is one "API" macro, bn_fix_top(), for stripping leading zeroes from
- * bignum data after direct manipulations on the data. There is also an
- * "internal" macro, bn_check_top(), for verifying that there are no leading
- * zeroes. Unfortunately, some auditing is required due to the fact that
- * bn_fix_top() has become an overabused duct-tape because bignum data is
- * occasionally passed around in an inconsistent state. So the following
- * changes have been made to sort this out;
- * - bn_fix_top()s implementation has been moved to bn_correct_top()
- * - if BN_DEBUG isn't defined, bn_fix_top() maps to bn_correct_top(), and
- *   bn_check_top() is as before.
- * - if BN_DEBUG *is* defined;
- *   - bn_check_top() tries to pollute unused words even if the bignum 'top' is
- *     consistent. (ed: only if BN_DEBUG_RAND is defined)
- *   - bn_fix_top() maps to bn_check_top() rather than "fixing" anything.
- * The idea is to have debug builds flag up inconsistent bignums when they
- * occur. If that occurs in a bn_fix_top(), we examine the code in question; if
- * the use of bn_fix_top() was appropriate (ie. it follows directly after code
- * that manipulates the bignum) it is converted to bn_correct_top(), and if it
- * was not appropriate, we convert it permanently to bn_check_top() and track
- * down the cause of the bug. Eventually, no internal code should be using the
- * bn_fix_top() macro. External applications and libraries should try this with
- * their own code too, both in terms of building against the openssl headers
- * with BN_DEBUG defined *and* linking with a version of OpenSSL built with it
- * defined. This not only improves external code, it provides more test
- * coverage for openssl's own code.
- */
-
-# ifdef BN_DEBUG
-
-/* We only need assert() when debugging */
-#  include <assert.h>
-
-#  ifdef BN_DEBUG_RAND
-/* To avoid "make update" cvs wars due to BN_DEBUG, use some tricks */
-#   ifndef RAND_pseudo_bytes
-int RAND_pseudo_bytes(unsigned char *buf, int num);
-#    define BN_DEBUG_TRIX
-#   endif
-#   define bn_pollute(a) \
-        do { \
-                const BIGNUM *_bnum1 = (a); \
-                if(_bnum1->top < _bnum1->dmax) { \
-                        unsigned char _tmp_char; \
-                        /* We cast away const without the compiler knowing, any \
-                         * *genuinely* constant variables that aren't mutable \
-                         * wouldn't be constructed with top!=dmax. */ \
-                        BN_ULONG *_not_const; \
-                        memcpy(&_not_const, &_bnum1->d, sizeof(BN_ULONG*)); \
-                        /* Debug only - safe to ignore error return */ \
-                        RAND_pseudo_bytes(&_tmp_char, 1); \
-                        memset((unsigned char *)(_not_const + _bnum1->top), _tmp_char, \
-                                (_bnum1->dmax - _bnum1->top) * sizeof(BN_ULONG)); \
-                } \
-        } while(0)
-#   ifdef BN_DEBUG_TRIX
-#    undef RAND_pseudo_bytes
-#   endif
-#  else
-#   define bn_pollute(a)
-#  endif
-#  define bn_check_top(a) \
-        do { \
-                const BIGNUM *_bnum2 = (a); \
-                if (_bnum2 != NULL) { \
-                        assert((_bnum2->top == 0) || \
-                                (_bnum2->d[_bnum2->top - 1] != 0)); \
-                        bn_pollute(_bnum2); \
-                } \
-        } while(0)
-
-#  define bn_fix_top(a)           bn_check_top(a)
-
-#  define bn_check_size(bn, bits) bn_wcheck_size(bn, ((bits+BN_BITS2-1))/BN_BITS2)
-#  define bn_wcheck_size(bn, words) \
-        do { \
-                const BIGNUM *_bnum2 = (bn); \
-                assert((words) <= (_bnum2)->dmax && (words) >= (_bnum2)->top); \
-                /* avoid unused variable warning with NDEBUG */ \
-                (void)(_bnum2); \
-        } while(0)
-
-# else                          /* !BN_DEBUG */
-
-#  define bn_pollute(a)
-#  define bn_check_top(a)
-#  define bn_fix_top(a)           bn_correct_top(a)
-#  define bn_check_size(bn, bits)
-#  define bn_wcheck_size(bn, words)
-
-# endif
-
-# define bn_correct_top(a) \
-        { \
-        BN_ULONG *ftl; \
-        int tmp_top = (a)->top; \
-        if (tmp_top > 0) \
-                { \
-                for (ftl= &((a)->d[tmp_top-1]); tmp_top > 0; tmp_top--) \
-                        if (*(ftl--)) break; \
-                (a)->top = tmp_top; \
-                } \
-        if ((a)->top == 0) \
-            (a)->neg = 0; \
-        bn_pollute(a); \
-        }
-
-BN_ULONG bn_mul_add_words(BN_ULONG *rp, const BN_ULONG *ap, int num,
-                          BN_ULONG w);
-BN_ULONG bn_mul_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w);
-void bn_sqr_words(BN_ULONG *rp, const BN_ULONG *ap, int num);
-BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d);
-BN_ULONG bn_add_words(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,
-                      int num);
-BN_ULONG bn_sub_words(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,
-                      int num);
-
-/* Primes from RFC 2409 */
-BIGNUM *get_rfc2409_prime_768(BIGNUM *bn);
-BIGNUM *get_rfc2409_prime_1024(BIGNUM *bn);
-
-/* Primes from RFC 3526 */
-BIGNUM *get_rfc3526_prime_1536(BIGNUM *bn);
-BIGNUM *get_rfc3526_prime_2048(BIGNUM *bn);
-BIGNUM *get_rfc3526_prime_3072(BIGNUM *bn);
-BIGNUM *get_rfc3526_prime_4096(BIGNUM *bn);
-BIGNUM *get_rfc3526_prime_6144(BIGNUM *bn);
-BIGNUM *get_rfc3526_prime_8192(BIGNUM *bn);
-
-int BN_bntest_rand(BIGNUM *rnd, int bits, int top, int bottom);
-
-/* BEGIN ERROR CODES */
-/*
- * The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_BN_strings(void);
-
-/* Error codes for the BN functions. */
-
-/* Function codes. */
-# define BN_F_BNRAND                                      127
-# define BN_F_BN_BLINDING_CONVERT_EX                      100
-# define BN_F_BN_BLINDING_CREATE_PARAM                    128
-# define BN_F_BN_BLINDING_INVERT_EX                       101
-# define BN_F_BN_BLINDING_NEW                             102
-# define BN_F_BN_BLINDING_UPDATE                          103
-# define BN_F_BN_BN2DEC                                   104
-# define BN_F_BN_BN2HEX                                   105
-# define BN_F_BN_CTX_GET                                  116
-# define BN_F_BN_CTX_NEW                                  106
-# define BN_F_BN_CTX_START                                129
-# define BN_F_BN_DIV                                      107
-# define BN_F_BN_DIV_NO_BRANCH                            138
-# define BN_F_BN_DIV_RECP                                 130
-# define BN_F_BN_EXP                                      123
-# define BN_F_BN_EXPAND2                                  108
-# define BN_F_BN_EXPAND_INTERNAL                          120
-# define BN_F_BN_GF2M_MOD                                 131
-# define BN_F_BN_GF2M_MOD_EXP                             132
-# define BN_F_BN_GF2M_MOD_MUL                             133
-# define BN_F_BN_GF2M_MOD_SOLVE_QUAD                      134
-# define BN_F_BN_GF2M_MOD_SOLVE_QUAD_ARR                  135
-# define BN_F_BN_GF2M_MOD_SQR                             136
-# define BN_F_BN_GF2M_MOD_SQRT                            137
-# define BN_F_BN_LSHIFT                                   145
-# define BN_F_BN_MOD_EXP2_MONT                            118
-# define BN_F_BN_MOD_EXP_MONT                             109
-# define BN_F_BN_MOD_EXP_MONT_CONSTTIME                   124
-# define BN_F_BN_MOD_EXP_MONT_WORD                        117
-# define BN_F_BN_MOD_EXP_RECP                             125
-# define BN_F_BN_MOD_EXP_SIMPLE                           126
-# define BN_F_BN_MOD_INVERSE                              110
-# define BN_F_BN_MOD_INVERSE_NO_BRANCH                    139
-# define BN_F_BN_MOD_LSHIFT_QUICK                         119
-# define BN_F_BN_MOD_MUL_RECIPROCAL                       111
-# define BN_F_BN_MOD_SQRT                                 121
-# define BN_F_BN_MPI2BN                                   112
-# define BN_F_BN_NEW                                      113
-# define BN_F_BN_RAND                                     114
-# define BN_F_BN_RAND_RANGE                               122
-# define BN_F_BN_RSHIFT                                   146
-# define BN_F_BN_USUB                                     115
-
-/* Reason codes. */
-# define BN_R_ARG2_LT_ARG3                                100
-# define BN_R_BAD_RECIPROCAL                              101
-# define BN_R_BIGNUM_TOO_LONG                             114
-# define BN_R_BITS_TOO_SMALL                              118
-# define BN_R_CALLED_WITH_EVEN_MODULUS                    102
-# define BN_R_DIV_BY_ZERO                                 103
-# define BN_R_ENCODING_ERROR                              104
-# define BN_R_EXPAND_ON_STATIC_BIGNUM_DATA                105
-# define BN_R_INPUT_NOT_REDUCED                           110
-# define BN_R_INVALID_LENGTH                              106
-# define BN_R_INVALID_RANGE                               115
-# define BN_R_INVALID_SHIFT                               119
-# define BN_R_NOT_A_SQUARE                                111
-# define BN_R_NOT_INITIALIZED                             107
-# define BN_R_NO_INVERSE                                  108
-# define BN_R_NO_SOLUTION                                 116
-# define BN_R_P_IS_NOT_PRIME                              112
-# define BN_R_TOO_MANY_ITERATIONS                         113
-# define BN_R_TOO_MANY_TEMPORARY_VARIABLES                109
-
-#ifdef  __cplusplus
-}
-#endif
-#endif

deps/openssl/openssl/include/openssl/buffer.h

@@ -1,125 +0,0 @@
-/* crypto/buffer/buffer.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_BUFFER_H
-# define HEADER_BUFFER_H
-
-# include <openssl/ossl_typ.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-# include <stddef.h>
-
-# if !defined(NO_SYS_TYPES_H)
-#  include <sys/types.h>
-# endif
-
-/* Already declared in ossl_typ.h */
-/* typedef struct buf_mem_st BUF_MEM; */
-
-struct buf_mem_st {
-    size_t length;              /* current number of bytes */
-    char *data;
-    size_t max;                 /* size of buffer */
-};
-
-BUF_MEM *BUF_MEM_new(void);
-void BUF_MEM_free(BUF_MEM *a);
-int BUF_MEM_grow(BUF_MEM *str, size_t len);
-int BUF_MEM_grow_clean(BUF_MEM *str, size_t len);
-size_t BUF_strnlen(const char *str, size_t maxlen);
-char *BUF_strdup(const char *str);
-
-/*
- * Like strndup, but in addition, explicitly guarantees to never read past the
- * first |siz| bytes of |str|.
- */
-char *BUF_strndup(const char *str, size_t siz);
-
-void *BUF_memdup(const void *data, size_t siz);
-void BUF_reverse(unsigned char *out, const unsigned char *in, size_t siz);
-
-/* safe string functions */
-size_t BUF_strlcpy(char *dst, const char *src, size_t siz);
-size_t BUF_strlcat(char *dst, const char *src, size_t siz);
-
-/* BEGIN ERROR CODES */
-/*
- * The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_BUF_strings(void);
-
-/* Error codes for the BUF functions. */
-
-/* Function codes. */
-# define BUF_F_BUF_MEMDUP                                 103
-# define BUF_F_BUF_MEM_GROW                               100
-# define BUF_F_BUF_MEM_GROW_CLEAN                         105
-# define BUF_F_BUF_MEM_NEW                                101
-# define BUF_F_BUF_STRDUP                                 102
-# define BUF_F_BUF_STRNDUP                                104
-
-/* Reason codes. */
-
-#ifdef  __cplusplus
-}
-#endif
-#endif

deps/openssl/openssl/include/openssl/camellia.h

@@ -1,132 +0,0 @@
-/* crypto/camellia/camellia.h */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-
-#ifndef HEADER_CAMELLIA_H
-# define HEADER_CAMELLIA_H
-
-# include <openssl/opensslconf.h>
-
-# ifdef OPENSSL_NO_CAMELLIA
-#  error CAMELLIA is disabled.
-# endif
-
-# include <stddef.h>
-
-# define CAMELLIA_ENCRYPT        1
-# define CAMELLIA_DECRYPT        0
-
-/*
- * Because array size can't be a const in C, the following two are macros.
- * Both sizes are in bytes.
- */
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* This should be a hidden type, but EVP requires that the size be known */
-
-# define CAMELLIA_BLOCK_SIZE 16
-# define CAMELLIA_TABLE_BYTE_LEN 272
-# define CAMELLIA_TABLE_WORD_LEN (CAMELLIA_TABLE_BYTE_LEN / 4)
-
-typedef unsigned int KEY_TABLE_TYPE[CAMELLIA_TABLE_WORD_LEN]; /* to match
-                                                               * with WORD */
-
-struct camellia_key_st {
-    union {
-        double d;               /* ensures 64-bit align */
-        KEY_TABLE_TYPE rd_key;
-    } u;
-    int grand_rounds;
-};
-typedef struct camellia_key_st CAMELLIA_KEY;
-
-# ifdef OPENSSL_FIPS
-int private_Camellia_set_key(const unsigned char *userKey, const int bits,
-                             CAMELLIA_KEY *key);
-# endif
-int Camellia_set_key(const unsigned char *userKey, const int bits,
-                     CAMELLIA_KEY *key);
-
-void Camellia_encrypt(const unsigned char *in, unsigned char *out,
-                      const CAMELLIA_KEY *key);
-void Camellia_decrypt(const unsigned char *in, unsigned char *out,
-                      const CAMELLIA_KEY *key);
-
-void Camellia_ecb_encrypt(const unsigned char *in, unsigned char *out,
-                          const CAMELLIA_KEY *key, const int enc);
-void Camellia_cbc_encrypt(const unsigned char *in, unsigned char *out,
-                          size_t length, const CAMELLIA_KEY *key,
-                          unsigned char *ivec, const int enc);
-void Camellia_cfb128_encrypt(const unsigned char *in, unsigned char *out,
-                             size_t length, const CAMELLIA_KEY *key,
-                             unsigned char *ivec, int *num, const int enc);
-void Camellia_cfb1_encrypt(const unsigned char *in, unsigned char *out,
-                           size_t length, const CAMELLIA_KEY *key,
-                           unsigned char *ivec, int *num, const int enc);
-void Camellia_cfb8_encrypt(const unsigned char *in, unsigned char *out,
-                           size_t length, const CAMELLIA_KEY *key,
-                           unsigned char *ivec, int *num, const int enc);
-void Camellia_ofb128_encrypt(const unsigned char *in, unsigned char *out,
-                             size_t length, const CAMELLIA_KEY *key,
-                             unsigned char *ivec, int *num);
-void Camellia_ctr128_encrypt(const unsigned char *in, unsigned char *out,
-                             size_t length, const CAMELLIA_KEY *key,
-                             unsigned char ivec[CAMELLIA_BLOCK_SIZE],
-                             unsigned char ecount_buf[CAMELLIA_BLOCK_SIZE],
-                             unsigned int *num);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif                          /* !HEADER_Camellia_H */

deps/openssl/openssl/include/openssl/cast.h

@@ -1,107 +0,0 @@
-/* crypto/cast/cast.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_CAST_H
-# define HEADER_CAST_H
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-# include <openssl/opensslconf.h>
-
-# ifdef OPENSSL_NO_CAST
-#  error CAST is disabled.
-# endif
-
-# define CAST_ENCRYPT    1
-# define CAST_DECRYPT    0
-
-# define CAST_LONG unsigned int
-
-# define CAST_BLOCK      8
-# define CAST_KEY_LENGTH 16
-
-typedef struct cast_key_st {
-    CAST_LONG data[32];
-    int short_key;              /* Use reduced rounds for short key */
-} CAST_KEY;
-
-# ifdef OPENSSL_FIPS
-void private_CAST_set_key(CAST_KEY *key, int len, const unsigned char *data);
-# endif
-void CAST_set_key(CAST_KEY *key, int len, const unsigned char *data);
-void CAST_ecb_encrypt(const unsigned char *in, unsigned char *out,
-                      const CAST_KEY *key, int enc);
-void CAST_encrypt(CAST_LONG *data, const CAST_KEY *key);
-void CAST_decrypt(CAST_LONG *data, const CAST_KEY *key);
-void CAST_cbc_encrypt(const unsigned char *in, unsigned char *out,
-                      long length, const CAST_KEY *ks, unsigned char *iv,
-                      int enc);
-void CAST_cfb64_encrypt(const unsigned char *in, unsigned char *out,
-                        long length, const CAST_KEY *schedule,
-                        unsigned char *ivec, int *num, int enc);
-void CAST_ofb64_encrypt(const unsigned char *in, unsigned char *out,
-                        long length, const CAST_KEY *schedule,
-                        unsigned char *ivec, int *num);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif