Initial pass at zlib bindings

LICENSE

@@ -73,3 +73,7 @@ The externally maintained libraries used by Node are:
 
   - tools/gyp GYP is a meta-build system copyright 2009 Google Inc and
     licensed under the three clause BSD license. See tools/gyp/LICENSE.
+
+  - deps/zlib copyright 1995-2010 Jean-loup Gailly and Mark Adler
+    licensed under a permissive free software license. See
+    deps/zlib/LICENSE.

deps/zlib/LICENSE

@@ -0,0 +1,25 @@
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+  version 1.2.4, March 14th, 2010
+
+  Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Jean-loup Gailly
+  Mark Adler
+
+*/

deps/zlib/README.chromium

@@ -0,0 +1,12 @@
+Name: zlib
+URL: http://zlib.net/
+Version: 1.2.3
+
+Description:
+General purpose compression library
+
+Local Modifications:
+A few minor changes, all marked with "Google":
+- Added #ifdefs to avoid compile warnings when NO_GZCOMPRESS is defined.
+- Removed use of strerror for WinCE in gzio.c.
+- Added 'int z_errno' global for WinCE, to which 'errno' is defined in zutil.h.

deps/zlib/adler32.c

@@ -0,0 +1,149 @@
+/* adler32.c -- compute the Adler-32 checksum of a data stream
+ * Copyright (C) 1995-2004 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id: adler32.c,v 3.6 2005/08/04 19:14:14 tor%cs.brown.edu Exp $ */
+
+#define ZLIB_INTERNAL
+#include "zlib.h"
+
+#define BASE 65521UL    /* largest prime smaller than 65536 */
+#define NMAX 5552
+/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
+
+#define DO1(buf,i)  {adler += (buf)[i]; sum2 += adler;}
+#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
+#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
+#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
+#define DO16(buf)   DO8(buf,0); DO8(buf,8);
+
+/* use NO_DIVIDE if your processor does not do division in hardware */
+#ifdef NO_DIVIDE
+#  define MOD(a) \
+    do { \
+        if (a >= (BASE << 16)) a -= (BASE << 16); \
+        if (a >= (BASE << 15)) a -= (BASE << 15); \
+        if (a >= (BASE << 14)) a -= (BASE << 14); \
+        if (a >= (BASE << 13)) a -= (BASE << 13); \
+        if (a >= (BASE << 12)) a -= (BASE << 12); \
+        if (a >= (BASE << 11)) a -= (BASE << 11); \
+        if (a >= (BASE << 10)) a -= (BASE << 10); \
+        if (a >= (BASE << 9)) a -= (BASE << 9); \
+        if (a >= (BASE << 8)) a -= (BASE << 8); \
+        if (a >= (BASE << 7)) a -= (BASE << 7); \
+        if (a >= (BASE << 6)) a -= (BASE << 6); \
+        if (a >= (BASE << 5)) a -= (BASE << 5); \
+        if (a >= (BASE << 4)) a -= (BASE << 4); \
+        if (a >= (BASE << 3)) a -= (BASE << 3); \
+        if (a >= (BASE << 2)) a -= (BASE << 2); \
+        if (a >= (BASE << 1)) a -= (BASE << 1); \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
+#  define MOD4(a) \
+    do { \
+        if (a >= (BASE << 4)) a -= (BASE << 4); \
+        if (a >= (BASE << 3)) a -= (BASE << 3); \
+        if (a >= (BASE << 2)) a -= (BASE << 2); \
+        if (a >= (BASE << 1)) a -= (BASE << 1); \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
+#else
+#  define MOD(a) a %= BASE
+#  define MOD4(a) a %= BASE
+#endif
+
+/* ========================================================================= */
+uLong ZEXPORT adler32(adler, buf, len)
+    uLong adler;
+    const Bytef *buf;
+    uInt len;
+{
+    unsigned long sum2;
+    unsigned n;
+
+    /* split Adler-32 into component sums */
+    sum2 = (adler >> 16) & 0xffff;
+    adler &= 0xffff;
+
+    /* in case user likes doing a byte at a time, keep it fast */
+    if (len == 1) {
+        adler += buf[0];
+        if (adler >= BASE)
+            adler -= BASE;
+        sum2 += adler;
+        if (sum2 >= BASE)
+            sum2 -= BASE;
+        return adler | (sum2 << 16);
+    }
+
+    /* initial Adler-32 value (deferred check for len == 1 speed) */
+    if (buf == Z_NULL)
+        return 1L;
+
+    /* in case short lengths are provided, keep it somewhat fast */
+    if (len < 16) {
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        if (adler >= BASE)
+            adler -= BASE;
+        MOD4(sum2);             /* only added so many BASE's */
+        return adler | (sum2 << 16);
+    }
+
+    /* do length NMAX blocks -- requires just one modulo operation */
+    while (len >= NMAX) {
+        len -= NMAX;
+        n = NMAX / 16;          /* NMAX is divisible by 16 */
+        do {
+            DO16(buf);          /* 16 sums unrolled */
+            buf += 16;
+        } while (--n);
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* do remaining bytes (less than NMAX, still just one modulo) */
+    if (len) {                  /* avoid modulos if none remaining */
+        while (len >= 16) {
+            len -= 16;
+            DO16(buf);
+            buf += 16;
+        }
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* return recombined sums */
+    return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off_t len2;
+{
+    unsigned long sum1;
+    unsigned long sum2;
+    unsigned rem;
+
+    /* the derivation of this formula is left as an exercise for the reader */
+    rem = (unsigned)(len2 % BASE);
+    sum1 = adler1 & 0xffff;
+    sum2 = rem * sum1;
+    MOD(sum2);
+    sum1 += (adler2 & 0xffff) + BASE - 1;
+    sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+    if (sum1 > BASE) sum1 -= BASE;
+    if (sum1 > BASE) sum1 -= BASE;
+    if (sum2 > (BASE << 1)) sum2 -= (BASE << 1);
+    if (sum2 > BASE) sum2 -= BASE;
+    return sum1 | (sum2 << 16);
+}

deps/zlib/compress.c

@@ -0,0 +1,79 @@
+/* compress.c -- compress a memory buffer
+ * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id: compress.c,v 3.6 2005/08/04 19:14:14 tor%cs.brown.edu Exp $ */
+
+#define ZLIB_INTERNAL
+#include "zlib.h"
+
+/* ===========================================================================
+     Compresses the source buffer into the destination buffer. The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer. Upon entry, destLen is the total size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+    int level;
+{
+    z_stream stream;
+    int err;
+
+    stream.next_in = (Bytef*)source;
+    stream.avail_in = (uInt)sourceLen;
+#ifdef MAXSEG_64K
+    /* Check for source > 64K on 16-bit machine: */
+    if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
+#endif
+    stream.next_out = dest;
+    stream.avail_out = (uInt)*destLen;
+    if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
+
+    stream.zalloc = (alloc_func)0;
+    stream.zfree = (free_func)0;
+    stream.opaque = (voidpf)0;
+
+    err = deflateInit(&stream, level);
+    if (err != Z_OK) return err;
+
+    err = deflate(&stream, Z_FINISH);
+    if (err != Z_STREAM_END) {
+        deflateEnd(&stream);
+        return err == Z_OK ? Z_BUF_ERROR : err;
+    }
+    *destLen = stream.total_out;
+
+    err = deflateEnd(&stream);
+    return err;
+}
+
+/* ===========================================================================
+ */
+int ZEXPORT compress (dest, destLen, source, sourceLen)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+{
+    return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
+}
+
+/* ===========================================================================
+     If the default memLevel or windowBits for deflateInit() is changed, then
+   this function needs to be updated.
+ */
+uLong ZEXPORT compressBound (sourceLen)
+    uLong sourceLen;
+{
+    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + 11;
+}

deps/zlib/contrib/minizip/ChangeLogUnzip

@@ -0,0 +1,67 @@
+Change in 1.01e (12 feb 05)
+- Fix in zipOpen2 for globalcomment (Rolf Kalbermatter)
+- Fix possible memory leak in unzip.c (Zoran Stevanovic)
+
+Change in 1.01b (20 may 04)
+- Integrate patch from Debian package (submited by Mark Brown)
+- Add tools mztools from Xavier Roche
+
+Change in 1.01 (8 may 04)
+- fix buffer overrun risk in unzip.c (Xavier Roche)
+- fix a minor buffer insecurity in minizip.c (Mike Whittaker)
+
+Change in 1.00: (10 sept 03)
+- rename to 1.00
+- cosmetic code change
+
+Change in 0.22: (19 May 03)
+- crypting support (unless you define NOCRYPT)
+- append file in existing zipfile
+
+Change in 0.21: (10 Mar 03)
+- bug fixes
+
+Change in 0.17: (27 Jan 02)
+- bug fixes
+
+Change in 0.16: (19 Jan 02)
+- Support of ioapi for virtualize zip file access
+
+Change in 0.15: (19 Mar 98)
+- fix memory leak in minizip.c
+
+Change in 0.14: (10 Mar 98)
+- fix bugs in minizip.c sample for zipping big file
+- fix problem in month in date handling
+- fix bug in unzlocal_GetCurrentFileInfoInternal in unzip.c for
+    comment handling
+
+Change in 0.13: (6 Mar 98)
+- fix bugs in zip.c
+- add real minizip sample
+
+Change in 0.12: (4 Mar 98)
+- add zip.c and zip.h for creates .zip file
+- fix change_file_date in miniunz.c for Unix (Jean-loup Gailly)
+- fix miniunz.c for file without specific record for directory
+
+Change in 0.11: (3 Mar 98)
+- fix bug in unzGetCurrentFileInfo for get extra field and comment
+- enhance miniunz sample, remove the bad unztst.c sample
+
+Change in 0.10: (2 Mar 98)
+- fix bug in unzReadCurrentFile
+- rename unzip* to unz* function and structure
+- remove Windows-like hungary notation variable name
+- modify some structure in unzip.h
+- add somes comment in source
+- remove unzipGetcCurrentFile function
+- replace ZUNZEXPORT by ZEXPORT
+- add unzGetLocalExtrafield for get the local extrafield info
+- add a new sample, miniunz.c
+
+Change in 0.4: (25 Feb 98)
+- suppress the type unzipFileInZip.
+  Only on file in the zipfile can be open at the same time
+- fix somes typo in code
+- added tm_unz structure in unzip_file_info (date/time in readable format)

deps/zlib/contrib/minizip/Makefile

@@ -0,0 +1,25 @@
+CC=cc
+CFLAGS=-O -I../..
+
+UNZ_OBJS = miniunz.o unzip.o ioapi.o ../../libz.a
+ZIP_OBJS = minizip.o zip.o   ioapi.o ../../libz.a
+
+.c.o:
+	$(CC) -c $(CFLAGS) $*.c
+
+all: miniunz minizip
+
+miniunz:  $(UNZ_OBJS)
+	$(CC) $(CFLAGS) -o $@ $(UNZ_OBJS)
+
+minizip:  $(ZIP_OBJS)
+	$(CC) $(CFLAGS) -o $@ $(ZIP_OBJS)
+
+test:	miniunz minizip
+	./minizip test readme.txt
+	./miniunz -l test.zip
+	mv readme.txt readme.old
+	./miniunz test.zip
+
+clean:
+	/bin/rm -f *.o *~ minizip miniunz

deps/zlib/contrib/minizip/crypt.h

@@ -0,0 +1,132 @@
+/* crypt.h -- base code for crypt/uncrypt ZIPfile
+
+
+   Version 1.01e, February 12th, 2005
+
+   Copyright (C) 1998-2005 Gilles Vollant
+
+   This code is a modified version of crypting code in Infozip distribution
+
+   The encryption/decryption parts of this source code (as opposed to the
+   non-echoing password parts) were originally written in Europe.  The
+   whole source package can be freely distributed, including from the USA.
+   (Prior to January 2000, re-export from the US was a violation of US law.)
+
+   This encryption code is a direct transcription of the algorithm from
+   Roger Schlafly, described by Phil Katz in the file appnote.txt.  This
+   file (appnote.txt) is distributed with the PKZIP program (even in the
+   version without encryption capabilities).
+
+   If you don't need crypting in your application, just define symbols
+   NOCRYPT and NOUNCRYPT.
+
+   This code support the "Traditional PKWARE Encryption".
+
+   The new AES encryption added on Zip format by Winzip (see the page
+   http://www.winzip.com/aes_info.htm ) and PKWare PKZip 5.x Strong
+   Encryption is not supported.
+*/
+
+#define CRC32(c, b) ((*(pcrc_32_tab+(((int)(c) ^ (b)) & 0xff))) ^ ((c) >> 8))
+
+/***********************************************************************
+ * Return the next byte in the pseudo-random sequence
+ */
+static int decrypt_byte(unsigned long* pkeys, const unsigned long* pcrc_32_tab)
+{
+    unsigned temp;  /* POTENTIAL BUG:  temp*(temp^1) may overflow in an
+                     * unpredictable manner on 16-bit systems; not a problem
+                     * with any known compiler so far, though */
+
+    temp = ((unsigned)(*(pkeys+2)) & 0xffff) | 2;
+    return (int)(((temp * (temp ^ 1)) >> 8) & 0xff);
+}
+
+/***********************************************************************
+ * Update the encryption keys with the next byte of plain text
+ */
+static int update_keys(unsigned long* pkeys,const unsigned long* pcrc_32_tab,int c)
+{
+    (*(pkeys+0)) = CRC32((*(pkeys+0)), c);
+    (*(pkeys+1)) += (*(pkeys+0)) & 0xff;
+    (*(pkeys+1)) = (*(pkeys+1)) * 134775813L + 1;
+    {
+      register int keyshift = (int)((*(pkeys+1)) >> 24);
+      (*(pkeys+2)) = CRC32((*(pkeys+2)), keyshift);
+    }
+    return c;
+}
+
+
+/***********************************************************************
+ * Initialize the encryption keys and the random header according to
+ * the given password.
+ */
+static void init_keys(const char* passwd,unsigned long* pkeys,const unsigned long* pcrc_32_tab)
+{
+    *(pkeys+0) = 305419896L;
+    *(pkeys+1) = 591751049L;
+    *(pkeys+2) = 878082192L;
+    while (*passwd != '\0') {
+        update_keys(pkeys,pcrc_32_tab,(int)*passwd);
+        passwd++;
+    }
+}
+
+#define zdecode(pkeys,pcrc_32_tab,c) \
+    (update_keys(pkeys,pcrc_32_tab,c ^= decrypt_byte(pkeys,pcrc_32_tab)))
+
+#define zencode(pkeys,pcrc_32_tab,c,t) \
+    (t=decrypt_byte(pkeys,pcrc_32_tab), update_keys(pkeys,pcrc_32_tab,c), t^(c))
+
+#ifdef INCLUDECRYPTINGCODE_IFCRYPTALLOWED
+
+#define RAND_HEAD_LEN  12
+   /* "last resort" source for second part of crypt seed pattern */
+#  ifndef ZCR_SEED2
+#    define ZCR_SEED2 3141592654UL     /* use PI as default pattern */
+#  endif
+
+static int crypthead(passwd, buf, bufSize, pkeys, pcrc_32_tab, crcForCrypting)
+    const char *passwd;         /* password string */
+    unsigned char *buf;         /* where to write header */
+    int bufSize;
+    unsigned long* pkeys;
+    const unsigned long* pcrc_32_tab;
+    unsigned long crcForCrypting;
+{
+    int n;                       /* index in random header */
+    int t;                       /* temporary */
+    int c;                       /* random byte */
+    unsigned char header[RAND_HEAD_LEN-2]; /* random header */
+    static unsigned calls = 0;   /* ensure different random header each time */
+
+    if (bufSize<RAND_HEAD_LEN)
+      return 0;
+
+    /* First generate RAND_HEAD_LEN-2 random bytes. We encrypt the
+     * output of rand() to get less predictability, since rand() is
+     * often poorly implemented.
+     */
+    if (++calls == 1)
+    {
+        srand((unsigned)(time(NULL) ^ ZCR_SEED2));
+    }
+    init_keys(passwd, pkeys, pcrc_32_tab);
+    for (n = 0; n < RAND_HEAD_LEN-2; n++)
+    {
+        c = (rand() >> 7) & 0xff;
+        header[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, c, t);
+    }
+    /* Encrypt random header (last two bytes is high word of crc) */
+    init_keys(passwd, pkeys, pcrc_32_tab);
+    for (n = 0; n < RAND_HEAD_LEN-2; n++)
+    {
+        buf[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, header[n], t);
+    }
+    buf[n++] = zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 16) & 0xff, t);
+    buf[n++] = zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 24) & 0xff, t);
+    return n;
+}
+
+#endif

deps/zlib/contrib/minizip/ioapi.c

@@ -0,0 +1,180 @@
+/* ioapi.c -- IO base function header for compress/uncompress .zip
+   files using zlib + zip or unzip API
+
+   Version 1.01e, February 12th, 2005
+
+   Copyright (C) 1998-2005 Gilles Vollant
+*/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#if defined(USE_SYSTEM_ZLIB)
+#include <zlib.h>
+#else
+#include "zlib.h"
+#endif
+
+#include "ioapi.h"
+
+/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */
+
+#ifndef SEEK_CUR
+#define SEEK_CUR    1
+#endif
+
+#ifndef SEEK_END
+#define SEEK_END    2
+#endif
+
+#ifndef SEEK_SET
+#define SEEK_SET    0
+#endif
+
+voidpf ZCALLBACK fopen_file_func OF((
+   voidpf opaque,
+   const char* filename,
+   int mode));
+
+uLong ZCALLBACK fread_file_func OF((
+   voidpf opaque,
+   voidpf stream,
+   void* buf,
+   uLong size));
+
+uLong ZCALLBACK fwrite_file_func OF((
+   voidpf opaque,
+   voidpf stream,
+   const void* buf,
+   uLong size));
+
+long ZCALLBACK ftell_file_func OF((
+   voidpf opaque,
+   voidpf stream));
+
+long ZCALLBACK fseek_file_func OF((
+   voidpf opaque,
+   voidpf stream,
+   uLong offset,
+   int origin));
+
+int ZCALLBACK fclose_file_func OF((
+   voidpf opaque,
+   voidpf stream));
+
+int ZCALLBACK ferror_file_func OF((
+   voidpf opaque,
+   voidpf stream));
+
+
+voidpf ZCALLBACK fopen_file_func (opaque, filename, mode)
+   voidpf opaque;
+   const char* filename;
+   int mode;
+{
+    FILE* file = NULL;
+    const char* mode_fopen = NULL;
+    if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
+        mode_fopen = "rb";
+    else
+    if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
+        mode_fopen = "r+b";
+    else
+    if (mode & ZLIB_FILEFUNC_MODE_CREATE)
+        mode_fopen = "wb";
+
+    if ((filename!=NULL) && (mode_fopen != NULL))
+        file = fopen(filename, mode_fopen);
+    return file;
+}
+
+
+uLong ZCALLBACK fread_file_func (opaque, stream, buf, size)
+   voidpf opaque;
+   voidpf stream;
+   void* buf;
+   uLong size;
+{
+    uLong ret;
+    ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream);
+    return ret;
+}
+
+
+uLong ZCALLBACK fwrite_file_func (opaque, stream, buf, size)
+   voidpf opaque;
+   voidpf stream;
+   const void* buf;
+   uLong size;
+{
+    uLong ret;
+    ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream);
+    return ret;
+}
+
+long ZCALLBACK ftell_file_func (opaque, stream)
+   voidpf opaque;
+   voidpf stream;
+{
+    long ret;
+    ret = ftell((FILE *)stream);
+    return ret;
+}
+
+long ZCALLBACK fseek_file_func (opaque, stream, offset, origin)
+   voidpf opaque;
+   voidpf stream;
+   uLong offset;
+   int origin;
+{
+    int fseek_origin=0;
+    long ret;
+    switch (origin)
+    {
+    case ZLIB_FILEFUNC_SEEK_CUR :
+        fseek_origin = SEEK_CUR;
+        break;
+    case ZLIB_FILEFUNC_SEEK_END :
+        fseek_origin = SEEK_END;
+        break;
+    case ZLIB_FILEFUNC_SEEK_SET :
+        fseek_origin = SEEK_SET;
+        break;
+    default: return -1;
+    }
+    ret = 0;
+    fseek((FILE *)stream, offset, fseek_origin);
+    return ret;
+}
+
+int ZCALLBACK fclose_file_func (opaque, stream)
+   voidpf opaque;
+   voidpf stream;
+{
+    int ret;
+    ret = fclose((FILE *)stream);
+    return ret;
+}
+
+int ZCALLBACK ferror_file_func (opaque, stream)
+   voidpf opaque;
+   voidpf stream;
+{
+    int ret;
+    ret = ferror((FILE *)stream);
+    return ret;
+}
+
+void fill_fopen_filefunc (pzlib_filefunc_def)
+  zlib_filefunc_def* pzlib_filefunc_def;
+{
+    pzlib_filefunc_def->zopen_file = fopen_file_func;
+    pzlib_filefunc_def->zread_file = fread_file_func;
+    pzlib_filefunc_def->zwrite_file = fwrite_file_func;
+    pzlib_filefunc_def->ztell_file = ftell_file_func;
+    pzlib_filefunc_def->zseek_file = fseek_file_func;
+    pzlib_filefunc_def->zclose_file = fclose_file_func;
+    pzlib_filefunc_def->zerror_file = ferror_file_func;
+    pzlib_filefunc_def->opaque = NULL;
+}

deps/zlib/contrib/minizip/ioapi.h

@@ -0,0 +1,75 @@
+/* ioapi.h -- IO base function header for compress/uncompress .zip
+   files using zlib + zip or unzip API
+
+   Version 1.01e, February 12th, 2005
+
+   Copyright (C) 1998-2005 Gilles Vollant
+*/
+
+#ifndef _ZLIBIOAPI_H
+#define _ZLIBIOAPI_H
+
+
+#define ZLIB_FILEFUNC_SEEK_CUR (1)
+#define ZLIB_FILEFUNC_SEEK_END (2)
+#define ZLIB_FILEFUNC_SEEK_SET (0)
+
+#define ZLIB_FILEFUNC_MODE_READ      (1)
+#define ZLIB_FILEFUNC_MODE_WRITE     (2)
+#define ZLIB_FILEFUNC_MODE_READWRITEFILTER (3)
+
+#define ZLIB_FILEFUNC_MODE_EXISTING (4)
+#define ZLIB_FILEFUNC_MODE_CREATE   (8)
+
+
+#ifndef ZCALLBACK
+
+#if (defined(WIN32) || defined (WINDOWS) || defined (_WINDOWS)) && defined(CALLBACK) && defined (USEWINDOWS_CALLBACK)
+#define ZCALLBACK CALLBACK
+#else
+#define ZCALLBACK
+#endif
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef voidpf (ZCALLBACK *open_file_func) OF((voidpf opaque, const char* filename, int mode));
+typedef uLong  (ZCALLBACK *read_file_func) OF((voidpf opaque, voidpf stream, void* buf, uLong size));
+typedef uLong  (ZCALLBACK *write_file_func) OF((voidpf opaque, voidpf stream, const void* buf, uLong size));
+typedef long   (ZCALLBACK *tell_file_func) OF((voidpf opaque, voidpf stream));
+typedef long   (ZCALLBACK *seek_file_func) OF((voidpf opaque, voidpf stream, uLong offset, int origin));
+typedef int    (ZCALLBACK *close_file_func) OF((voidpf opaque, voidpf stream));
+typedef int    (ZCALLBACK *testerror_file_func) OF((voidpf opaque, voidpf stream));
+
+typedef struct zlib_filefunc_def_s
+{
+    open_file_func      zopen_file;
+    read_file_func      zread_file;
+    write_file_func     zwrite_file;
+    tell_file_func      ztell_file;
+    seek_file_func      zseek_file;
+    close_file_func     zclose_file;
+    testerror_file_func zerror_file;
+    voidpf              opaque;
+} zlib_filefunc_def;
+
+
+
+void fill_fopen_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def));
+
+#define ZREAD(filefunc,filestream,buf,size) ((*((filefunc).zread_file))((filefunc).opaque,filestream,buf,size))
+#define ZWRITE(filefunc,filestream,buf,size) ((*((filefunc).zwrite_file))((filefunc).opaque,filestream,buf,size))
+#define ZTELL(filefunc,filestream) ((*((filefunc).ztell_file))((filefunc).opaque,filestream))
+#define ZSEEK(filefunc,filestream,pos,mode) ((*((filefunc).zseek_file))((filefunc).opaque,filestream,pos,mode))
+#define ZCLOSE(filefunc,filestream) ((*((filefunc).zclose_file))((filefunc).opaque,filestream))
+#define ZERROR(filefunc,filestream) ((*((filefunc).zerror_file))((filefunc).opaque,filestream))
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+

deps/zlib/contrib/minizip/iowin32.c

@@ -0,0 +1,270 @@
+/* iowin32.c -- IO base function header for compress/uncompress .zip
+   files using zlib + zip or unzip API
+   This IO API version uses the Win32 API (for Microsoft Windows)
+
+   Version 1.01e, February 12th, 2005
+
+   Copyright (C) 1998-2005 Gilles Vollant
+*/
+
+#include <stdlib.h>
+
+#include "zlib.h"
+#include "ioapi.h"
+#include "iowin32.h"
+
+#ifndef INVALID_HANDLE_VALUE
+#define INVALID_HANDLE_VALUE (0xFFFFFFFF)
+#endif
+
+#ifndef INVALID_SET_FILE_POINTER
+#define INVALID_SET_FILE_POINTER ((DWORD)-1)
+#endif
+
+voidpf ZCALLBACK win32_open_file_func OF((
+   voidpf opaque,
+   const char* filename,
+   int mode));
+
+uLong ZCALLBACK win32_read_file_func OF((
+   voidpf opaque,
+   voidpf stream,
+   void* buf,
+   uLong size));
+
+uLong ZCALLBACK win32_write_file_func OF((
+   voidpf opaque,
+   voidpf stream,
+   const void* buf,
+   uLong size));
+
+long ZCALLBACK win32_tell_file_func OF((
+   voidpf opaque,
+   voidpf stream));
+
+long ZCALLBACK win32_seek_file_func OF((
+   voidpf opaque,
+   voidpf stream,
+   uLong offset,
+   int origin));
+
+int ZCALLBACK win32_close_file_func OF((
+   voidpf opaque,
+   voidpf stream));
+
+int ZCALLBACK win32_error_file_func OF((
+   voidpf opaque,
+   voidpf stream));
+
+typedef struct
+{
+    HANDLE hf;
+    int error;
+} WIN32FILE_IOWIN;
+
+voidpf ZCALLBACK win32_open_file_func (opaque, filename, mode)
+   voidpf opaque;
+   const char* filename;
+   int mode;
+{
+    const char* mode_fopen = NULL;
+    DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
+    HANDLE hFile = 0;
+    voidpf ret=NULL;
+
+    dwDesiredAccess = dwShareMode = dwFlagsAndAttributes = 0;
+
+    if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
+    {
+        dwDesiredAccess = GENERIC_READ;
+        dwCreationDisposition = OPEN_EXISTING;
+        dwShareMode = FILE_SHARE_READ;
+    }
+    else
+    if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
+    {
+        dwDesiredAccess = GENERIC_WRITE | GENERIC_READ;
+        dwCreationDisposition = OPEN_EXISTING;
+    }
+    else
+    if (mode & ZLIB_FILEFUNC_MODE_CREATE)
+    {
+        dwDesiredAccess = GENERIC_WRITE | GENERIC_READ;
+        dwCreationDisposition = CREATE_ALWAYS;
+    }
+
+    if ((filename!=NULL) && (dwDesiredAccess != 0))
+        hFile = CreateFile((LPCTSTR)filename, dwDesiredAccess, dwShareMode, NULL,
+                      dwCreationDisposition, dwFlagsAndAttributes, NULL);
+
+    if (hFile == INVALID_HANDLE_VALUE)
+        hFile = NULL;
+
+    if (hFile != NULL)
+    {
+        WIN32FILE_IOWIN w32fiow;
+        w32fiow.hf = hFile;
+        w32fiow.error = 0;
+        ret = malloc(sizeof(WIN32FILE_IOWIN));
+        if (ret==NULL)
+            CloseHandle(hFile);
+        else *((WIN32FILE_IOWIN*)ret) = w32fiow;
+    }
+    return ret;
+}
+
+
+uLong ZCALLBACK win32_read_file_func (opaque, stream, buf, size)
+   voidpf opaque;
+   voidpf stream;
+   void* buf;
+   uLong size;
+{
+    uLong ret=0;
+    HANDLE hFile = NULL;
+    if (stream!=NULL)
+        hFile = ((WIN32FILE_IOWIN*)stream) -> hf;
+    if (hFile != NULL)
+        if (!ReadFile(hFile, buf, size, &ret, NULL))
+        {
+            DWORD dwErr = GetLastError();
+            if (dwErr == ERROR_HANDLE_EOF)
+                dwErr = 0;
+            ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+        }
+
+    return ret;
+}
+
+
+uLong ZCALLBACK win32_write_file_func (opaque, stream, buf, size)
+   voidpf opaque;
+   voidpf stream;
+   const void* buf;
+   uLong size;
+{
+    uLong ret=0;
+    HANDLE hFile = NULL;
+    if (stream!=NULL)
+        hFile = ((WIN32FILE_IOWIN*)stream) -> hf;
+
+    if (hFile !=NULL)
+        if (!WriteFile(hFile, buf, size, &ret, NULL))
+        {
+            DWORD dwErr = GetLastError();
+            if (dwErr == ERROR_HANDLE_EOF)
+                dwErr = 0;
+            ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+        }
+
+    return ret;
+}
+
+long ZCALLBACK win32_tell_file_func (opaque, stream)
+   voidpf opaque;
+   voidpf stream;
+{
+    long ret=-1;
+    HANDLE hFile = NULL;
+    if (stream!=NULL)
+        hFile = ((WIN32FILE_IOWIN*)stream) -> hf;
+    if (hFile != NULL)
+    {
+        DWORD dwSet = SetFilePointer(hFile, 0, NULL, FILE_CURRENT);
+        if (dwSet == INVALID_SET_FILE_POINTER)
+        {
+            DWORD dwErr = GetLastError();
+            ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+            ret = -1;
+        }
+        else
+            ret=(long)dwSet;
+    }
+    return ret;
+}
+
+long ZCALLBACK win32_seek_file_func (opaque, stream, offset, origin)
+   voidpf opaque;
+   voidpf stream;
+   uLong offset;
+   int origin;
+{
+    DWORD dwMoveMethod=0xFFFFFFFF;
+    HANDLE hFile = NULL;
+
+    long ret=-1;
+    if (stream!=NULL)
+        hFile = ((WIN32FILE_IOWIN*)stream) -> hf;
+    switch (origin)
+    {
+    case ZLIB_FILEFUNC_SEEK_CUR :
+        dwMoveMethod = FILE_CURRENT;
+        break;
+    case ZLIB_FILEFUNC_SEEK_END :
+        dwMoveMethod = FILE_END;
+        break;
+    case ZLIB_FILEFUNC_SEEK_SET :
+        dwMoveMethod = FILE_BEGIN;
+        break;
+    default: return -1;
+    }
+
+    if (hFile != NULL)
+    {
+        DWORD dwSet = SetFilePointer(hFile, offset, NULL, dwMoveMethod);
+        if (dwSet == INVALID_SET_FILE_POINTER)
+        {
+            DWORD dwErr = GetLastError();
+            ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+            ret = -1;
+        }
+        else
+            ret=0;
+    }
+    return ret;
+}
+
+int ZCALLBACK win32_close_file_func (opaque, stream)
+   voidpf opaque;
+   voidpf stream;
+{
+    int ret=-1;
+
+    if (stream!=NULL)
+    {
+        HANDLE hFile;
+        hFile = ((WIN32FILE_IOWIN*)stream) -> hf;
+        if (hFile != NULL)
+        {
+            CloseHandle(hFile);
+            ret=0;
+        }
+        free(stream);
+    }
+    return ret;
+}
+
+int ZCALLBACK win32_error_file_func (opaque, stream)
+   voidpf opaque;
+   voidpf stream;
+{
+    int ret=-1;
+    if (stream!=NULL)
+    {
+        ret = ((WIN32FILE_IOWIN*)stream) -> error;
+    }
+    return ret;
+}
+
+void fill_win32_filefunc (pzlib_filefunc_def)
+  zlib_filefunc_def* pzlib_filefunc_def;
+{
+    pzlib_filefunc_def->zopen_file = win32_open_file_func;
+    pzlib_filefunc_def->zread_file = win32_read_file_func;
+    pzlib_filefunc_def->zwrite_file = win32_write_file_func;
+    pzlib_filefunc_def->ztell_file = win32_tell_file_func;
+    pzlib_filefunc_def->zseek_file = win32_seek_file_func;
+    pzlib_filefunc_def->zclose_file = win32_close_file_func;
+    pzlib_filefunc_def->zerror_file = win32_error_file_func;
+    pzlib_filefunc_def->opaque=NULL;
+}

deps/zlib/contrib/minizip/iowin32.h

@@ -0,0 +1,21 @@
+/* iowin32.h -- IO base function header for compress/uncompress .zip
+   files using zlib + zip or unzip API
+   This IO API version uses the Win32 API (for Microsoft Windows)
+
+   Version 1.01e, February 12th, 2005
+
+   Copyright (C) 1998-2005 Gilles Vollant
+*/
+
+#include <windows.h>
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void fill_win32_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def));
+
+#ifdef __cplusplus
+}
+#endif

deps/zlib/contrib/minizip/miniunz.c

@@ -0,0 +1,585 @@
+/*
+   miniunz.c
+   Version 1.01e, February 12th, 2005
+
+   Copyright (C) 1998-2005 Gilles Vollant
+*/
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#ifdef unix
+# include <unistd.h>
+# include <utime.h>
+#else
+# include <direct.h>
+# include <io.h>
+#endif
+
+#include "unzip.h"
+
+#define CASESENSITIVITY (0)
+#define WRITEBUFFERSIZE (8192)
+#define MAXFILENAME (256)
+
+#ifdef WIN32
+#define USEWIN32IOAPI
+#include "iowin32.h"
+#endif
+/*
+  mini unzip, demo of unzip package
+
+  usage :
+  Usage : miniunz [-exvlo] file.zip [file_to_extract] [-d extractdir]
+
+  list the file in the zipfile, and print the content of FILE_ID.ZIP or README.TXT
+    if it exists
+*/
+
+
+/* change_file_date : change the date/time of a file
+    filename : the filename of the file where date/time must be modified
+    dosdate : the new date at the MSDos format (4 bytes)
+    tmu_date : the SAME new date at the tm_unz format */
+void change_file_date(filename,dosdate,tmu_date)
+    const char *filename;
+    uLong dosdate;
+    tm_unz tmu_date;
+{
+#ifdef WIN32
+  HANDLE hFile;
+  FILETIME ftm,ftLocal,ftCreate,ftLastAcc,ftLastWrite;
+
+  hFile = CreateFile(filename,GENERIC_READ | GENERIC_WRITE,
+                      0,NULL,OPEN_EXISTING,0,NULL);
+  GetFileTime(hFile,&ftCreate,&ftLastAcc,&ftLastWrite);
+  DosDateTimeToFileTime((WORD)(dosdate>>16),(WORD)dosdate,&ftLocal);
+  LocalFileTimeToFileTime(&ftLocal,&ftm);
+  SetFileTime(hFile,&ftm,&ftLastAcc,&ftm);
+  CloseHandle(hFile);
+#else
+#ifdef unix
+  struct utimbuf ut;
+  struct tm newdate;
+  newdate.tm_sec = tmu_date.tm_sec;
+  newdate.tm_min=tmu_date.tm_min;
+  newdate.tm_hour=tmu_date.tm_hour;
+  newdate.tm_mday=tmu_date.tm_mday;
+  newdate.tm_mon=tmu_date.tm_mon;
+  if (tmu_date.tm_year > 1900)
+      newdate.tm_year=tmu_date.tm_year - 1900;
+  else
+      newdate.tm_year=tmu_date.tm_year ;
+  newdate.tm_isdst=-1;
+
+  ut.actime=ut.modtime=mktime(&newdate);
+  utime(filename,&ut);
+#endif
+#endif
+}
+
+
+/* mymkdir and change_file_date are not 100 % portable
+   As I don't know well Unix, I wait feedback for the unix portion */
+
+int mymkdir(dirname)
+    const char* dirname;
+{
+    int ret=0;
+#ifdef WIN32
+    ret = mkdir(dirname);
+#else
+#ifdef unix
+    ret = mkdir (dirname,0775);
+#endif
+#endif
+    return ret;
+}
+
+int makedir (newdir)
+    char *newdir;
+{
+  char *buffer ;
+  char *p;
+  int  len = (int)strlen(newdir);
+
+  if (len <= 0)
+    return 0;
+
+  buffer = (char*)malloc(len+1);
+  strcpy(buffer,newdir);
+
+  if (buffer[len-1] == '/') {
+    buffer[len-1] = '\0';
+  }
+  if (mymkdir(buffer) == 0)
+    {
+      free(buffer);
+      return 1;
+    }
+
+  p = buffer+1;
+  while (1)
+    {
+      char hold;
+
+      while(*p && *p != '\\' && *p != '/')
+        p++;
+      hold = *p;
+      *p = 0;
+      if ((mymkdir(buffer) == -1) && (errno == ENOENT))
+        {
+          printf("couldn't create directory %s\n",buffer);
+          free(buffer);
+          return 0;
+        }
+      if (hold == 0)
+        break;
+      *p++ = hold;
+    }
+  free(buffer);
+  return 1;
+}
+
+void do_banner()
+{
+    printf("MiniUnz 1.01b, demo of zLib + Unz package written by Gilles Vollant\n");
+    printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n");
+}
+
+void do_help()
+{
+    printf("Usage : miniunz [-e] [-x] [-v] [-l] [-o] [-p password] file.zip [file_to_extr.] [-d extractdir]\n\n" \
+           "  -e  Extract without pathname (junk paths)\n" \
+           "  -x  Extract with pathname\n" \
+           "  -v  list files\n" \
+           "  -l  list files\n" \
+           "  -d  directory to extract into\n" \
+           "  -o  overwrite files without prompting\n" \
+           "  -p  extract crypted file using password\n\n");
+}
+
+
+int do_list(uf)
+    unzFile uf;
+{
+    uLong i;
+    unz_global_info gi;
+    int err;
+
+    err = unzGetGlobalInfo (uf,&gi);
+    if (err!=UNZ_OK)
+        printf("error %d with zipfile in unzGetGlobalInfo \n",err);
+    printf(" Length  Method   Size  Ratio   Date    Time   CRC-32     Name\n");
+    printf(" ------  ------   ----  -----   ----    ----   ------     ----\n");
+    for (i=0;i<gi.number_entry;i++)
+    {
+        char filename_inzip[256];
+        unz_file_info file_info;
+        uLong ratio=0;
+        const char *string_method;
+        char charCrypt=' ';
+        err = unzGetCurrentFileInfo(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
+        if (err!=UNZ_OK)
+        {
+            printf("error %d with zipfile in unzGetCurrentFileInfo\n",err);
+            break;
+        }
+        if (file_info.uncompressed_size>0)
+            ratio = (file_info.compressed_size*100)/file_info.uncompressed_size;
+
+        /* display a '*' if the file is crypted */
+        if ((file_info.flag & 1) != 0)
+            charCrypt='*';
+
+        if (file_info.compression_method==0)
+            string_method="Stored";
+        else
+        if (file_info.compression_method==Z_DEFLATED)
+        {
+            uInt iLevel=(uInt)((file_info.flag & 0x6)/2);
+            if (iLevel==0)
+              string_method="Defl:N";
+            else if (iLevel==1)
+              string_method="Defl:X";
+            else if ((iLevel==2) || (iLevel==3))
+              string_method="Defl:F"; /* 2:fast , 3 : extra fast*/
+        }
+        else
+            string_method="Unkn. ";
+
+        printf("%7lu  %6s%c%7lu %3lu%%  %2.2lu-%2.2lu-%2.2lu  %2.2lu:%2.2lu  %8.8lx   %s\n",
+                file_info.uncompressed_size,string_method,
+                charCrypt,
+                file_info.compressed_size,
+                ratio,
+                (uLong)file_info.tmu_date.tm_mon + 1,
+                (uLong)file_info.tmu_date.tm_mday,
+                (uLong)file_info.tmu_date.tm_year % 100,
+                (uLong)file_info.tmu_date.tm_hour,(uLong)file_info.tmu_date.tm_min,
+                (uLong)file_info.crc,filename_inzip);
+        if ((i+1)<gi.number_entry)
+        {
+            err = unzGoToNextFile(uf);
+            if (err!=UNZ_OK)
+            {
+                printf("error %d with zipfile in unzGoToNextFile\n",err);
+                break;
+            }
+        }
+    }
+
+    return 0;
+}
+
+
+int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
+    unzFile uf;
+    const int* popt_extract_without_path;
+    int* popt_overwrite;
+    const char* password;
+{
+    char filename_inzip[256];
+    char* filename_withoutpath;
+    char* p;
+    int err=UNZ_OK;
+    FILE *fout=NULL;
+    void* buf;
+    uInt size_buf;
+
+    unz_file_info file_info;
+    uLong ratio=0;
+    err = unzGetCurrentFileInfo(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
+
+    if (err!=UNZ_OK)
+    {
+        printf("error %d with zipfile in unzGetCurrentFileInfo\n",err);
+        return err;
+    }
+
+    size_buf = WRITEBUFFERSIZE;
+    buf = (void*)malloc(size_buf);
+    if (buf==NULL)
+    {
+        printf("Error allocating memory\n");
+        return UNZ_INTERNALERROR;
+    }
+
+    p = filename_withoutpath = filename_inzip;
+    while ((*p) != '\0')
+    {
+        if (((*p)=='/') || ((*p)=='\\'))
+            filename_withoutpath = p+1;
+        p++;
+    }
+
+    if ((*filename_withoutpath)=='\0')
+    {
+        if ((*popt_extract_without_path)==0)
+        {
+            printf("creating directory: %s\n",filename_inzip);
+            mymkdir(filename_inzip);
+        }
+    }
+    else
+    {
+        const char* write_filename;
+        int skip=0;
+
+        if ((*popt_extract_without_path)==0)
+            write_filename = filename_inzip;
+        else
+            write_filename = filename_withoutpath;
+
+        err = unzOpenCurrentFilePassword(uf,password);
+        if (err!=UNZ_OK)
+        {
+            printf("error %d with zipfile in unzOpenCurrentFilePassword\n",err);
+        }
+
+        if (((*popt_overwrite)==0) && (err==UNZ_OK))
+        {
+            char rep=0;
+            FILE* ftestexist;
+            ftestexist = fopen(write_filename,"rb");
+            if (ftestexist!=NULL)
+            {
+                fclose(ftestexist);
+                do
+                {
+                    char answer[128];
+                    int ret;
+
+                    printf("The file %s exists. Overwrite ? [y]es, [n]o, [A]ll: ",write_filename);
+                    ret = scanf("%1s",answer);
+                    if (ret != 1) 
+                    {
+                       exit(EXIT_FAILURE);
+                    }
+                    rep = answer[0] ;
+                    if ((rep>='a') && (rep<='z'))
+                        rep -= 0x20;
+                }
+                while ((rep!='Y') && (rep!='N') && (rep!='A'));
+            }
+
+            if (rep == 'N')
+                skip = 1;
+
+            if (rep == 'A')
+                *popt_overwrite=1;
+        }
+
+        if ((skip==0) && (err==UNZ_OK))
+        {
+            fout=fopen(write_filename,"wb");
+
+            /* some zipfile don't contain directory alone before file */
+            if ((fout==NULL) && ((*popt_extract_without_path)==0) &&
+                                (filename_withoutpath!=(char*)filename_inzip))
+            {
+                char c=*(filename_withoutpath-1);
+                *(filename_withoutpath-1)='\0';
+                makedir(write_filename);
+                *(filename_withoutpath-1)=c;
+                fout=fopen(write_filename,"wb");
+            }
+
+            if (fout==NULL)
+            {
+                printf("error opening %s\n",write_filename);
+            }
+        }
+
+        if (fout!=NULL)
+        {
+            printf(" extracting: %s\n",write_filename);
+
+            do
+            {
+                err = unzReadCurrentFile(uf,buf,size_buf);
+                if (err<0)
+                {
+                    printf("error %d with zipfile in unzReadCurrentFile\n",err);
+                    break;
+                }
+                if (err>0)
+                    if (fwrite(buf,err,1,fout)!=1)
+                    {
+                        printf("error in writing extracted file\n");
+                        err=UNZ_ERRNO;
+                        break;
+                    }
+            }
+            while (err>0);
+            if (fout)
+                    fclose(fout);
+
+            if (err==0)
+                change_file_date(write_filename,file_info.dosDate,
+                                 file_info.tmu_date);
+        }
+
+        if (err==UNZ_OK)
+        {
+            err = unzCloseCurrentFile (uf);
+            if (err!=UNZ_OK)
+            {
+                printf("error %d with zipfile in unzCloseCurrentFile\n",err);
+            }
+        }
+        else
+            unzCloseCurrentFile(uf); /* don't lose the error */
+    }
+
+    free(buf);
+    return err;
+}
+
+
+int do_extract(uf,opt_extract_without_path,opt_overwrite,password)
+    unzFile uf;
+    int opt_extract_without_path;
+    int opt_overwrite;
+    const char* password;
+{
+    uLong i;
+    unz_global_info gi;
+    int err;
+    FILE* fout=NULL;
+
+    err = unzGetGlobalInfo (uf,&gi);
+    if (err!=UNZ_OK)
+        printf("error %d with zipfile in unzGetGlobalInfo \n",err);
+
+    for (i=0;i<gi.number_entry;i++)
+    {
+        if (do_extract_currentfile(uf,&opt_extract_without_path,
+                                      &opt_overwrite,
+                                      password) != UNZ_OK)
+            break;
+
+        if ((i+1)<gi.number_entry)
+        {
+            err = unzGoToNextFile(uf);
+            if (err!=UNZ_OK)
+            {
+                printf("error %d with zipfile in unzGoToNextFile\n",err);
+                break;
+            }
+        }
+    }
+
+    return 0;
+}
+
+int do_extract_onefile(uf,filename,opt_extract_without_path,opt_overwrite,password)
+    unzFile uf;
+    const char* filename;
+    int opt_extract_without_path;
+    int opt_overwrite;
+    const char* password;
+{
+    int err = UNZ_OK;
+    if (unzLocateFile(uf,filename,CASESENSITIVITY)!=UNZ_OK)
+    {
+        printf("file %s not found in the zipfile\n",filename);
+        return 2;
+    }
+
+    if (do_extract_currentfile(uf,&opt_extract_without_path,
+                                      &opt_overwrite,
+                                      password) == UNZ_OK)
+        return 0;
+    else
+        return 1;
+}
+
+
+int main(argc,argv)
+    int argc;
+    char *argv[];
+{
+    const char *zipfilename=NULL;
+    const char *filename_to_extract=NULL;
+    const char *password=NULL;
+    char filename_try[MAXFILENAME+16] = "";
+    int i;
+    int opt_do_list=0;
+    int opt_do_extract=1;
+    int opt_do_extract_withoutpath=0;
+    int opt_overwrite=0;
+    int opt_extractdir=0;
+    const char *dirname=NULL;
+    unzFile uf=NULL;
+
+    do_banner();
+    if (argc==1)
+    {
+        do_help();
+        return 0;
+    }
+    else
+    {
+        for (i=1;i<argc;i++)
+        {
+            if ((*argv[i])=='-')
+            {
+                const char *p=argv[i]+1;
+
+                while ((*p)!='\0')
+                {
+                    char c=*(p++);;
+                    if ((c=='l') || (c=='L'))
+                        opt_do_list = 1;
+                    if ((c=='v') || (c=='V'))
+                        opt_do_list = 1;
+                    if ((c=='x') || (c=='X'))
+                        opt_do_extract = 1;
+                    if ((c=='e') || (c=='E'))
+                        opt_do_extract = opt_do_extract_withoutpath = 1;
+                    if ((c=='o') || (c=='O'))
+                        opt_overwrite=1;
+                    if ((c=='d') || (c=='D'))
+                    {
+                        opt_extractdir=1;
+                        dirname=argv[i+1];
+                    }
+
+                    if (((c=='p') || (c=='P')) && (i+1<argc))
+                    {
+                        password=argv[i+1];
+                        i++;
+                    }
+                }
+            }
+            else
+            {
+                if (zipfilename == NULL)
+                    zipfilename = argv[i];
+                else if ((filename_to_extract==NULL) && (!opt_extractdir))
+                        filename_to_extract = argv[i] ;
+            }
+        }
+    }
+
+    if (zipfilename!=NULL)
+    {
+
+#        ifdef USEWIN32IOAPI
+        zlib_filefunc_def ffunc;
+#        endif
+
+        strncpy(filename_try, zipfilename,MAXFILENAME-1);
+        /* strncpy doesnt append the trailing NULL, of the string is too long. */
+        filename_try[ MAXFILENAME ] = '\0';
+
+#        ifdef USEWIN32IOAPI
+        fill_win32_filefunc(&ffunc);
+        uf = unzOpen2(zipfilename,&ffunc);
+#        else
+        uf = unzOpen(zipfilename);
+#        endif
+        if (uf==NULL)
+        {
+            strcat(filename_try,".zip");
+#            ifdef USEWIN32IOAPI
+            uf = unzOpen2(filename_try,&ffunc);
+#            else
+            uf = unzOpen(filename_try);
+#            endif
+        }
+    }
+
+    if (uf==NULL)
+    {
+        printf("Cannot open %s or %s.zip\n",zipfilename,zipfilename);
+        return 1;
+    }
+    printf("%s opened\n",filename_try);
+
+    if (opt_do_list==1)
+        return do_list(uf);
+    else if (opt_do_extract==1)
+    {
+        if (opt_extractdir && chdir(dirname)) 
+        {
+          printf("Error changing into %s, aborting\n", dirname);
+          exit(-1);
+        }
+
+        if (filename_to_extract == NULL)
+            return do_extract(uf,opt_do_extract_withoutpath,opt_overwrite,password);
+        else
+            return do_extract_onefile(uf,filename_to_extract,
+                                      opt_do_extract_withoutpath,opt_overwrite,password);
+    }
+    unzCloseCurrentFile(uf);
+
+    return 0;
+}

deps/zlib/contrib/minizip/minizip.c

@@ -0,0 +1,420 @@
+/*
+   minizip.c
+   Version 1.01e, February 12th, 2005
+
+   Copyright (C) 1998-2005 Gilles Vollant
+*/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#ifdef unix
+# include <unistd.h>
+# include <utime.h>
+# include <sys/types.h>
+# include <sys/stat.h>
+#else
+# include <direct.h>
+# include <io.h>
+#endif
+
+#include "zip.h"
+
+#ifdef WIN32
+#define USEWIN32IOAPI
+#include "iowin32.h"
+#endif
+
+
+
+#define WRITEBUFFERSIZE (16384)
+#define MAXFILENAME (256)
+
+#ifdef WIN32
+uLong filetime(f, tmzip, dt)
+    char *f;                /* name of file to get info on */
+    tm_zip *tmzip;             /* return value: access, modific. and creation times */
+    uLong *dt;             /* dostime */
+{
+  int ret = 0;
+  {
+      FILETIME ftLocal;
+      HANDLE hFind;
+      WIN32_FIND_DATA  ff32;
+
+      hFind = FindFirstFile(f,&ff32);
+      if (hFind != INVALID_HANDLE_VALUE)
+      {
+        FileTimeToLocalFileTime(&(ff32.ftLastWriteTime),&ftLocal);
+        FileTimeToDosDateTime(&ftLocal,((LPWORD)dt)+1,((LPWORD)dt)+0);
+        FindClose(hFind);
+        ret = 1;
+      }
+  }
+  return ret;
+}
+#else
+#ifdef unix
+uLong filetime(f, tmzip, dt)
+    char *f;               /* name of file to get info on */
+    tm_zip *tmzip;         /* return value: access, modific. and creation times */
+    uLong *dt;             /* dostime */
+{
+  int ret=0;
+  struct stat s;        /* results of stat() */
+  struct tm* filedate;
+  time_t tm_t=0;
+
+  if (strcmp(f,"-")!=0)
+  {
+    char name[MAXFILENAME+1];
+    int len = strlen(f);
+    if (len > MAXFILENAME)
+      len = MAXFILENAME;
+
+    strncpy(name, f,MAXFILENAME-1);
+    /* strncpy doesnt append the trailing NULL, of the string is too long. */
+    name[ MAXFILENAME ] = '\0';
+
+    if (name[len - 1] == '/')
+      name[len - 1] = '\0';
+    /* not all systems allow stat'ing a file with / appended */
+    if (stat(name,&s)==0)
+    {
+      tm_t = s.st_mtime;
+      ret = 1;
+    }
+  }
+  filedate = localtime(&tm_t);
+
+  tmzip->tm_sec  = filedate->tm_sec;
+  tmzip->tm_min  = filedate->tm_min;
+  tmzip->tm_hour = filedate->tm_hour;
+  tmzip->tm_mday = filedate->tm_mday;
+  tmzip->tm_mon  = filedate->tm_mon ;
+  tmzip->tm_year = filedate->tm_year;
+
+  return ret;
+}
+#else
+uLong filetime(f, tmzip, dt)
+    char *f;                /* name of file to get info on */
+    tm_zip *tmzip;             /* return value: access, modific. and creation times */
+    uLong *dt;             /* dostime */
+{
+    return 0;
+}
+#endif
+#endif
+
+
+
+
+int check_exist_file(filename)
+    const char* filename;
+{
+    FILE* ftestexist;
+    int ret = 1;
+    ftestexist = fopen(filename,"rb");
+    if (ftestexist==NULL)
+        ret = 0;
+    else
+        fclose(ftestexist);
+    return ret;
+}
+
+void do_banner()
+{
+    printf("MiniZip 1.01b, demo of zLib + Zip package written by Gilles Vollant\n");
+    printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n");
+}
+
+void do_help()
+{
+    printf("Usage : minizip [-o] [-a] [-0 to -9] [-p password] file.zip [files_to_add]\n\n" \
+           "  -o  Overwrite existing file.zip\n" \
+           "  -a  Append to existing file.zip\n" \
+           "  -0  Store only\n" \
+           "  -1  Compress faster\n" \
+           "  -9  Compress better\n\n");
+}
+
+/* calculate the CRC32 of a file,
+   because to encrypt a file, we need known the CRC32 of the file before */
+int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,unsigned long* result_crc)
+{
+   unsigned long calculate_crc=0;
+   int err=ZIP_OK;
+   FILE * fin = fopen(filenameinzip,"rb");
+   unsigned long size_read = 0;
+   unsigned long total_read = 0;
+   if (fin==NULL)
+   {
+       err = ZIP_ERRNO;
+   }
+
+    if (err == ZIP_OK)
+        do
+        {
+            err = ZIP_OK;
+            size_read = (int)fread(buf,1,size_buf,fin);
+            if (size_read < size_buf)
+                if (feof(fin)==0)
+            {
+                printf("error in reading %s\n",filenameinzip);
+                err = ZIP_ERRNO;
+            }
+
+            if (size_read>0)
+                calculate_crc = crc32(calculate_crc,buf,size_read);
+            total_read += size_read;
+
+        } while ((err == ZIP_OK) && (size_read>0));
+
+    if (fin)
+        fclose(fin);
+
+    *result_crc=calculate_crc;
+    printf("file %s crc %x\n",filenameinzip,calculate_crc);
+    return err;
+}
+
+int main(argc,argv)
+    int argc;
+    char *argv[];
+{
+    int i;
+    int opt_overwrite=0;
+    int opt_compress_level=Z_DEFAULT_COMPRESSION;
+    int zipfilenamearg = 0;
+    char filename_try[MAXFILENAME+16];
+    int zipok;
+    int err=0;
+    int size_buf=0;
+    void* buf=NULL;
+    const char* password=NULL;
+
+
+    do_banner();
+    if (argc==1)
+    {
+        do_help();
+        return 0;
+    }
+    else
+    {
+        for (i=1;i<argc;i++)
+        {
+            if ((*argv[i])=='-')
+            {
+                const char *p=argv[i]+1;
+
+                while ((*p)!='\0')
+                {
+                    char c=*(p++);;
+                    if ((c=='o') || (c=='O'))
+                        opt_overwrite = 1;
+                    if ((c=='a') || (c=='A'))
+                        opt_overwrite = 2;
+                    if ((c>='0') && (c<='9'))
+                        opt_compress_level = c-'0';
+
+                    if (((c=='p') || (c=='P')) && (i+1<argc))
+                    {
+                        password=argv[i+1];
+                        i++;
+                    }
+                }
+            }
+            else
+                if (zipfilenamearg == 0)
+                    zipfilenamearg = i ;
+        }
+    }
+
+    size_buf = WRITEBUFFERSIZE;
+    buf = (void*)malloc(size_buf);
+    if (buf==NULL)
+    {
+        printf("Error allocating memory\n");
+        return ZIP_INTERNALERROR;
+    }
+
+    if (zipfilenamearg==0)
+        zipok=0;
+    else
+    {
+        int i,len;
+        int dot_found=0;
+
+        zipok = 1 ;
+        strncpy(filename_try, argv[zipfilenamearg],MAXFILENAME-1);
+        /* strncpy doesnt append the trailing NULL, of the string is too long. */
+        filename_try[ MAXFILENAME ] = '\0';
+
+        len=(int)strlen(filename_try);
+        for (i=0;i<len;i++)
+            if (filename_try[i]=='.')
+                dot_found=1;
+
+        if (dot_found==0)
+            strcat(filename_try,".zip");
+
+        if (opt_overwrite==2)
+        {
+            /* if the file don't exist, we not append file */
+            if (check_exist_file(filename_try)==0)
+                opt_overwrite=1;
+        }
+        else
+        if (opt_overwrite==0)
+            if (check_exist_file(filename_try)!=0)
+            {
+                char rep=0;
+                do
+                {
+                    char answer[128];
+                    int ret;
+                    printf("The file %s exists. Overwrite ? [y]es, [n]o, [a]ppend : ",filename_try);
+                    ret = scanf("%1s",answer);
+                    if (ret != 1)
+                    {
+                       exit(EXIT_FAILURE);
+                    }
+                    rep = answer[0] ;
+                    if ((rep>='a') && (rep<='z'))
+                        rep -= 0x20;
+                }
+                while ((rep!='Y') && (rep!='N') && (rep!='A'));
+                if (rep=='N')
+                    zipok = 0;
+                if (rep=='A')
+                    opt_overwrite = 2;
+            }
+    }
+
+    if (zipok==1)
+    {
+        zipFile zf;
+        int errclose;
+#        ifdef USEWIN32IOAPI
+        zlib_filefunc_def ffunc;
+        fill_win32_filefunc(&ffunc);
+        zf = zipOpen2(filename_try,(opt_overwrite==2) ? 2 : 0,NULL,&ffunc);
+#        else
+        zf = zipOpen(filename_try,(opt_overwrite==2) ? 2 : 0);
+#        endif
+
+        if (zf == NULL)
+        {
+            printf("error opening %s\n",filename_try);
+            err= ZIP_ERRNO;
+        }
+        else
+            printf("creating %s\n",filename_try);
+
+        for (i=zipfilenamearg+1;(i<argc) && (err==ZIP_OK);i++)
+        {
+            if (!((((*(argv[i]))=='-') || ((*(argv[i]))=='/')) &&
+                  ((argv[i][1]=='o') || (argv[i][1]=='O') ||
+                   (argv[i][1]=='a') || (argv[i][1]=='A') ||
+                   (argv[i][1]=='p') || (argv[i][1]=='P') ||
+                   ((argv[i][1]>='0') || (argv[i][1]<='9'))) &&
+                  (strlen(argv[i]) == 2)))
+            {
+                FILE * fin;
+                int size_read;
+                const char* filenameinzip = argv[i];
+                zip_fileinfo zi;
+                unsigned long crcFile=0;
+
+                zi.tmz_date.tm_sec = zi.tmz_date.tm_min = zi.tmz_date.tm_hour =
+                zi.tmz_date.tm_mday = zi.tmz_date.tm_mon = zi.tmz_date.tm_year = 0;
+                zi.dosDate = 0;
+                zi.internal_fa = 0;
+                zi.external_fa = 0;
+                filetime(filenameinzip,&zi.tmz_date,&zi.dosDate);
+
+/*
+                err = zipOpenNewFileInZip(zf,filenameinzip,&zi,
+                                 NULL,0,NULL,0,NULL / * comment * /,
+                                 (opt_compress_level != 0) ? Z_DEFLATED : 0,
+                                 opt_compress_level);
+*/
+                if ((password != NULL) && (err==ZIP_OK))
+                    err = getFileCrc(filenameinzip,buf,size_buf,&crcFile);
+
+                err = zipOpenNewFileInZip3(zf,filenameinzip,&zi,
+                                 NULL,0,NULL,0,NULL /* comment*/,
+                                 (opt_compress_level != 0) ? Z_DEFLATED : 0,
+                                 opt_compress_level,0,
+                                 /* -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, */
+                                 -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
+                                 password,crcFile);
+
+                if (err != ZIP_OK)
+                    printf("error in opening %s in zipfile\n",filenameinzip);
+                else
+                {
+                    fin = fopen(filenameinzip,"rb");
+                    if (fin==NULL)
+                    {
+                        err=ZIP_ERRNO;
+                        printf("error in opening %s for reading\n",filenameinzip);
+                    }
+                }
+
+                if (err == ZIP_OK)
+                    do
+                    {
+                        err = ZIP_OK;
+                        size_read = (int)fread(buf,1,size_buf,fin);
+                        if (size_read < size_buf)
+                            if (feof(fin)==0)
+                        {
+                            printf("error in reading %s\n",filenameinzip);
+                            err = ZIP_ERRNO;
+                        }
+
+                        if (size_read>0)
+                        {
+                            err = zipWriteInFileInZip (zf,buf,size_read);
+                            if (err<0)
+                            {
+                                printf("error in writing %s in the zipfile\n",
+                                                 filenameinzip);
+                            }
+
+                        }
+                    } while ((err == ZIP_OK) && (size_read>0));
+
+                if (fin)
+                    fclose(fin);
+
+                if (err<0)
+                    err=ZIP_ERRNO;
+                else
+                {
+                    err = zipCloseFileInZip(zf);
+                    if (err!=ZIP_OK)
+                        printf("error in closing %s in the zipfile\n",
+                                    filenameinzip);
+                }
+            }
+        }
+        errclose = zipClose(zf,NULL);
+        if (errclose != ZIP_OK)
+            printf("error in closing %s\n",filename_try);
+    }
+    else
+    {
+       do_help();
+    }
+
+    free(buf);
+    return 0;
+}

deps/zlib/contrib/minizip/mztools.c

@@ -0,0 +1,286 @@
+/*
+  Additional tools for Minizip
+  Code: Xavier Roche '2004
+  License: Same as ZLIB (www.gzip.org)
+*/
+
+/* Code */
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#if defined(USE_SYSTEM_ZLIB)
+#include <zlib.h>
+#else
+#include "zlib.h"
+#endif
+#include "unzip.h"
+
+#define READ_8(adr)  ((unsigned char)*(adr))
+#define READ_16(adr) ( READ_8(adr) | (READ_8(adr+1) << 8) )
+#define READ_32(adr) ( READ_16(adr) | (READ_16((adr)+2) << 16) )
+
+#define WRITE_8(buff, n) do { \
+  *((unsigned char*)(buff)) = (unsigned char) ((n) & 0xff); \
+} while(0)
+#define WRITE_16(buff, n) do { \
+  WRITE_8((unsigned char*)(buff), n); \
+  WRITE_8(((unsigned char*)(buff)) + 1, (n) >> 8); \
+} while(0)
+#define WRITE_32(buff, n) do { \
+  WRITE_16((unsigned char*)(buff), (n) & 0xffff); \
+  WRITE_16((unsigned char*)(buff) + 2, (n) >> 16); \
+} while(0)
+
+extern int ZEXPORT unzRepair(file, fileOut, fileOutTmp, nRecovered, bytesRecovered)
+const char* file;
+const char* fileOut;
+const char* fileOutTmp;
+uLong* nRecovered;
+uLong* bytesRecovered;
+{
+  int err = Z_OK;
+  FILE* fpZip = fopen(file, "rb");
+  FILE* fpOut = fopen(fileOut, "wb");
+  FILE* fpOutCD = fopen(fileOutTmp, "wb");
+  if (fpZip != NULL &&  fpOut != NULL) {
+    int entries = 0;
+    uLong totalBytes = 0;
+    char header[30];
+    char filename[256];
+    char extra[1024];
+    int offset = 0;
+    int offsetCD = 0;
+    while ( fread(header, 1, 30, fpZip) == 30 ) {
+      int currentOffset = offset;
+
+      /* File entry */
+      if (READ_32(header) == 0x04034b50) {
+        unsigned int version = READ_16(header + 4);
+        unsigned int gpflag = READ_16(header + 6);
+        unsigned int method = READ_16(header + 8);
+        unsigned int filetime = READ_16(header + 10);
+        unsigned int filedate = READ_16(header + 12);
+        unsigned int crc = READ_32(header + 14); /* crc */
+        unsigned int cpsize = READ_32(header + 18); /* compressed size */
+        unsigned int uncpsize = READ_32(header + 22); /* uncompressed sz */
+        unsigned int fnsize = READ_16(header + 26); /* file name length */
+        unsigned int extsize = READ_16(header + 28); /* extra field length */
+        filename[0] = extra[0] = '\0';
+        
+        /* Header */
+        if (fwrite(header, 1, 30, fpOut) == 30) {
+          offset += 30;
+        } else {
+          err = Z_ERRNO;
+          break;
+        }
+        
+        /* Filename */
+        if (fnsize > 0) {
+          if (fread(filename, 1, fnsize, fpZip) == fnsize) {
+            if (fwrite(filename, 1, fnsize, fpOut) == fnsize) {
+              offset += fnsize;
+            } else {
+              err = Z_ERRNO;
+              break;
+            }
+          } else {
+            err = Z_ERRNO;
+            break;
+          }
+        } else {
+          err = Z_STREAM_ERROR;
+          break;
+        }
+
+        /* Extra field */
+        if (extsize > 0) {
+          if (fread(extra, 1, extsize, fpZip) == extsize) {
+            if (fwrite(extra, 1, extsize, fpOut) == extsize) {
+              offset += extsize;
+            } else {
+              err = Z_ERRNO;
+              break;
+            }
+          } else {
+            err = Z_ERRNO;
+            break;
+          }
+        }
+        
+        /* Data */
+        {
+          int dataSize = cpsize;
+          if (dataSize == 0) {
+            dataSize = uncpsize;
+          }
+          if (dataSize > 0) {
+            char* data = malloc(dataSize);
+            if (data != NULL) {
+              if ((int)fread(data, 1, dataSize, fpZip) == dataSize) {
+                if ((int)fwrite(data, 1, dataSize, fpOut) == dataSize) {
+                  offset += dataSize;
+                  totalBytes += dataSize;
+                } else {
+                  err = Z_ERRNO;
+                }
+              } else {
+                err = Z_ERRNO;
+              }
+              free(data);
+              if (err != Z_OK) {
+                break;
+              }
+            } else {
+              err = Z_MEM_ERROR;
+              break;
+            }
+          }
+        }
+        
+        /* Central directory entry */
+        {
+          char header[46];
+          char* comment = "";
+          int comsize = (int) strlen(comment);
+          WRITE_32(header, 0x02014b50);
+          WRITE_16(header + 4, version);
+          WRITE_16(header + 6, version);
+          WRITE_16(header + 8, gpflag);
+          WRITE_16(header + 10, method);
+          WRITE_16(header + 12, filetime);
+          WRITE_16(header + 14, filedate);
+          WRITE_32(header + 16, crc);
+          WRITE_32(header + 20, cpsize);
+          WRITE_32(header + 24, uncpsize);
+          WRITE_16(header + 28, fnsize);
+          WRITE_16(header + 30, extsize);
+          WRITE_16(header + 32, comsize);
+          WRITE_16(header + 34, 0);     /* disk # */
+          WRITE_16(header + 36, 0);     /* int attrb */
+          WRITE_32(header + 38, 0);     /* ext attrb */
+          WRITE_32(header + 42, currentOffset);
+          /* Header */
+          if (fwrite(header, 1, 46, fpOutCD) == 46) {
+            offsetCD += 46;
+            
+            /* Filename */
+            if (fnsize > 0) {
+              if (fwrite(filename, 1, fnsize, fpOutCD) == fnsize) {
+                offsetCD += fnsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
+            } else {
+              err = Z_STREAM_ERROR;
+              break;
+            }
+            
+            /* Extra field */
+            if (extsize > 0) {
+              if (fwrite(extra, 1, extsize, fpOutCD) == extsize) {
+                offsetCD += extsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
+            }
+            
+            /* Comment field */
+            if (comsize > 0) {
+              if ((int)fwrite(comment, 1, comsize, fpOutCD) == comsize) {
+                offsetCD += comsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
+            }
+            
+            
+          } else {
+            err = Z_ERRNO;
+            break;
+          }
+        }
+
+        /* Success */
+        entries++;
+
+      } else {
+        break;
+      }
+    }
+
+    /* Final central directory  */
+    {
+      int entriesZip = entries;
+      char header[22];
+      char* comment = ""; // "ZIP File recovered by zlib/minizip/mztools";
+      int comsize = (int) strlen(comment);
+      if (entriesZip > 0xffff) {
+        entriesZip = 0xffff;
+      }
+      WRITE_32(header, 0x06054b50);
+      WRITE_16(header + 4, 0);    /* disk # */
+      WRITE_16(header + 6, 0);    /* disk # */
+      WRITE_16(header + 8, entriesZip);   /* hack */
+      WRITE_16(header + 10, entriesZip);  /* hack */
+      WRITE_32(header + 12, offsetCD);    /* size of CD */
+      WRITE_32(header + 16, offset);      /* offset to CD */
+      WRITE_16(header + 20, comsize);     /* comment */
+      
+      /* Header */
+      if (fwrite(header, 1, 22, fpOutCD) == 22) {
+        
+        /* Comment field */
+        if (comsize > 0) {
+          if ((int)fwrite(comment, 1, comsize, fpOutCD) != comsize) {
+            err = Z_ERRNO;
+          }
+        }
+        
+      } else {
+        err = Z_ERRNO;
+      }
+    }
+
+    /* Final merge (file + central directory) */
+    fclose(fpOutCD);
+    if (err == Z_OK) {
+      fpOutCD = fopen(fileOutTmp, "rb");
+      if (fpOutCD != NULL) {
+        int nRead;
+        char buffer[8192];
+        while ( (nRead = (int)fread(buffer, 1, sizeof(buffer), fpOutCD)) > 0) {
+          if ((int)fwrite(buffer, 1, nRead, fpOut) != nRead) {
+            err = Z_ERRNO;
+            break;
+          }
+        }
+        fclose(fpOutCD);
+      }
+    }
+    
+    /* Close */
+    fclose(fpZip);
+    fclose(fpOut);
+    
+    /* Wipe temporary file */
+    (void)remove(fileOutTmp);
+    
+    /* Number of recovered entries */
+    if (err == Z_OK) {
+      if (nRecovered != NULL) {
+        *nRecovered = entries;
+      }
+      if (bytesRecovered != NULL) {
+        *bytesRecovered = totalBytes;
+      }
+    }
+  } else {
+    err = Z_STREAM_ERROR;
+  }
+  return err;
+}

deps/zlib/contrib/minizip/mztools.h

@@ -0,0 +1,33 @@
+/*
+  Additional tools for Minizip
+  Code: Xavier Roche '2004
+  License: Same as ZLIB (www.gzip.org)
+*/
+
+#ifndef _zip_tools_H
+#define _zip_tools_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(USE_SYSTEM_ZLIB)
+#include <zlib.h>
+#else
+#include "zlib.h"
+#endif
+
+#include "unzip.h"
+
+/* Repair a ZIP file (missing central directory) 
+   file: file to recover
+   fileOut: output file after recovery
+   fileOutTmp: temporary file name used for recovery
+*/
+extern int ZEXPORT unzRepair(const char* file, 
+                             const char* fileOut, 
+                             const char* fileOutTmp, 
+                             uLong* nRecovered,
+                             uLong* bytesRecovered);
+
+#endif

deps/zlib/contrib/minizip/unzip.h

@@ -0,0 +1,356 @@
+/* unzip.h -- IO for uncompress .zip files using zlib
+   Version 1.01e, February 12th, 2005
+
+   Copyright (C) 1998-2005 Gilles Vollant
+
+   This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g
+     WinZip, InfoZip tools and compatible.
+
+   Multi volume ZipFile (span) are not supported.
+   Encryption compatible with pkzip 2.04g only supported
+   Old compressions used by old PKZip 1.x are not supported
+
+
+   I WAIT FEEDBACK at mail info@winimage.com
+   Visit also http://www.winimage.com/zLibDll/unzip.htm for evolution
+
+   Condition of use and distribution are the same than zlib :
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+
+*/
+
+/* for more info about .ZIP format, see
+      http://www.info-zip.org/pub/infozip/doc/appnote-981119-iz.zip
+      http://www.info-zip.org/pub/infozip/doc/
+   PkWare has also a specification at :
+      ftp://ftp.pkware.com/probdesc.zip
+*/
+
+#ifndef _unz_H
+#define _unz_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(USE_SYSTEM_ZLIB)
+#include <zlib.h>
+#else
+#include "zlib.h"
+#endif
+
+#ifndef _ZLIBIOAPI_H
+#include "ioapi.h"
+#endif
+
+#if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP)
+/* like the STRICT of WIN32, we define a pointer that cannot be converted
+    from (void*) without cast */
+typedef struct TagunzFile__ { int unused; } unzFile__;
+typedef unzFile__ *unzFile;
+#else
+typedef voidp unzFile;
+#endif
+
+
+#define UNZ_OK                          (0)
+#define UNZ_END_OF_LIST_OF_FILE         (-100)
+#define UNZ_ERRNO                       (Z_ERRNO)
+#define UNZ_EOF                         (0)
+#define UNZ_PARAMERROR                  (-102)
+#define UNZ_BADZIPFILE                  (-103)
+#define UNZ_INTERNALERROR               (-104)
+#define UNZ_CRCERROR                    (-105)
+
+/* tm_unz contain date/time info */
+typedef struct tm_unz_s
+{
+    uInt tm_sec;            /* seconds after the minute - [0,59] */
+    uInt tm_min;            /* minutes after the hour - [0,59] */
+    uInt tm_hour;           /* hours since midnight - [0,23] */
+    uInt tm_mday;           /* day of the month - [1,31] */
+    uInt tm_mon;            /* months since January - [0,11] */
+    uInt tm_year;           /* years - [1980..2044] */
+} tm_unz;
+
+/* unz_global_info structure contain global data about the ZIPfile
+   These data comes from the end of central dir */
+typedef struct unz_global_info_s
+{
+    uLong number_entry;         /* total number of entries in
+                       the central dir on this disk */
+    uLong size_comment;         /* size of the global comment of the zipfile */
+} unz_global_info;
+
+
+/* unz_file_info contain information about a file in the zipfile */
+typedef struct unz_file_info_s
+{
+    uLong version;              /* version made by                 2 bytes */
+    uLong version_needed;       /* version needed to extract       2 bytes */
+    uLong flag;                 /* general purpose bit flag        2 bytes */
+    uLong compression_method;   /* compression method              2 bytes */
+    uLong dosDate;              /* last mod file date in Dos fmt   4 bytes */
+    uLong crc;                  /* crc-32                          4 bytes */
+    uLong compressed_size;      /* compressed size                 4 bytes */
+    uLong uncompressed_size;    /* uncompressed size               4 bytes */
+    uLong size_filename;        /* filename length                 2 bytes */
+    uLong size_file_extra;      /* extra field length              2 bytes */
+    uLong size_file_comment;    /* file comment length             2 bytes */
+
+    uLong disk_num_start;       /* disk number start               2 bytes */
+    uLong internal_fa;          /* internal file attributes        2 bytes */
+    uLong external_fa;          /* external file attributes        4 bytes */
+
+    tm_unz tmu_date;
+} unz_file_info;
+
+extern int ZEXPORT unzStringFileNameCompare OF ((const char* fileName1,
+                                                 const char* fileName2,
+                                                 int iCaseSensitivity));
+/*
+   Compare two filename (fileName1,fileName2).
+   If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)
+   If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi
+                                or strcasecmp)
+   If iCaseSenisivity = 0, case sensitivity is defaut of your operating system
+    (like 1 on Unix, 2 on Windows)
+*/
+
+
+extern unzFile ZEXPORT unzOpen OF((const char *path));
+/*
+  Open a Zip file. path contain the full pathname (by example,
+     on a Windows XP computer "c:\\zlib\\zlib113.zip" or on an Unix computer
+     "zlib/zlib113.zip".
+     If the zipfile cannot be opened (file don't exist or in not valid), the
+       return value is NULL.
+     Else, the return value is a unzFile Handle, usable with other function
+       of this unzip package.
+*/
+
+extern unzFile ZEXPORT unzOpen2 OF((const char *path,
+                                    zlib_filefunc_def* pzlib_filefunc_def));
+/*
+   Open a Zip file, like unzOpen, but provide a set of file low level API
+      for read/write the zip file (see ioapi.h)
+*/
+
+extern int ZEXPORT unzClose OF((unzFile file));
+/*
+  Close a ZipFile opened with unzipOpen.
+  If there is files inside the .Zip opened with unzOpenCurrentFile (see later),
+    these files MUST be closed with unzipCloseCurrentFile before call unzipClose.
+  return UNZ_OK if there is no problem. */
+
+extern int ZEXPORT unzGetGlobalInfo OF((unzFile file,
+                                        unz_global_info *pglobal_info));
+/*
+  Write info about the ZipFile in the *pglobal_info structure.
+  No preparation of the structure is needed
+  return UNZ_OK if there is no problem. */
+
+
+extern int ZEXPORT unzGetGlobalComment OF((unzFile file,
+                                           char *szComment,
+                                           uLong uSizeBuf));
+/*
+  Get the global comment string of the ZipFile, in the szComment buffer.
+  uSizeBuf is the size of the szComment buffer.
+  return the number of byte copied or an error code <0
+*/
+
+
+/***************************************************************************/
+/* Unzip package allow you browse the directory of the zipfile */
+
+extern int ZEXPORT unzGoToFirstFile OF((unzFile file));
+/*
+  Set the current file of the zipfile to the first file.
+  return UNZ_OK if there is no problem
+*/
+
+extern int ZEXPORT unzGoToNextFile OF((unzFile file));
+/*
+  Set the current file of the zipfile to the next file.
+  return UNZ_OK if there is no problem
+  return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.
+*/
+
+extern int ZEXPORT unzLocateFile OF((unzFile file,
+                     const char *szFileName,
+                     int iCaseSensitivity));
+/*
+  Try locate the file szFileName in the zipfile.
+  For the iCaseSensitivity signification, see unzStringFileNameCompare
+
+  return value :
+  UNZ_OK if the file is found. It becomes the current file.
+  UNZ_END_OF_LIST_OF_FILE if the file is not found
+*/
+
+
+/* ****************************************** */
+/* Ryan supplied functions */
+/* unz_file_info contain information about a file in the zipfile */
+typedef struct unz_file_pos_s
+{
+    uLong pos_in_zip_directory;   /* offset in zip file directory */
+    uLong num_of_file;            /* # of file */
+} unz_file_pos;
+
+extern int ZEXPORT unzGetFilePos(
+    unzFile file,
+    unz_file_pos* file_pos);
+
+extern int ZEXPORT unzGoToFilePos(
+    unzFile file,
+    unz_file_pos* file_pos);
+
+/* ****************************************** */
+
+extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file,
+                         unz_file_info *pfile_info,
+                         char *szFileName,
+                         uLong fileNameBufferSize,
+                         void *extraField,
+                         uLong extraFieldBufferSize,
+                         char *szComment,
+                         uLong commentBufferSize));
+/*
+  Get Info about the current file
+  if pfile_info!=NULL, the *pfile_info structure will contain somes info about
+        the current file
+  if szFileName!=NULL, the filemane string will be copied in szFileName
+            (fileNameBufferSize is the size of the buffer)
+  if extraField!=NULL, the extra field information will be copied in extraField
+            (extraFieldBufferSize is the size of the buffer).
+            This is the Central-header version of the extra field
+  if szComment!=NULL, the comment string of the file will be copied in szComment
+            (commentBufferSize is the size of the buffer)
+*/
+
+/***************************************************************************/
+/* for reading the content of the current zipfile, you can open it, read data
+   from it, and close it (you can close it before reading all the file)
+   */
+
+extern int ZEXPORT unzOpenCurrentFile OF((unzFile file));
+/*
+  Open for reading data the current file in the zipfile.
+  If there is no error, the return value is UNZ_OK.
+*/
+
+extern int ZEXPORT unzOpenCurrentFilePassword OF((unzFile file,
+                                                  const char* password));
+/*
+  Open for reading data the current file in the zipfile.
+  password is a crypting password
+  If there is no error, the return value is UNZ_OK.
+*/
+
+extern int ZEXPORT unzOpenCurrentFile2 OF((unzFile file,
+                                           int* method,
+                                           int* level,
+                                           int raw));
+/*
+  Same than unzOpenCurrentFile, but open for read raw the file (not uncompress)
+    if raw==1
+  *method will receive method of compression, *level will receive level of
+     compression
+  note : you can set level parameter as NULL (if you did not want known level,
+         but you CANNOT set method parameter as NULL
+*/
+
+extern int ZEXPORT unzOpenCurrentFile3 OF((unzFile file,
+                                           int* method,
+                                           int* level,
+                                           int raw,
+                                           const char* password));
+/*
+  Same than unzOpenCurrentFile, but open for read raw the file (not uncompress)
+    if raw==1
+  *method will receive method of compression, *level will receive level of
+     compression
+  note : you can set level parameter as NULL (if you did not want known level,
+         but you CANNOT set method parameter as NULL
+*/
+
+
+extern int ZEXPORT unzCloseCurrentFile OF((unzFile file));
+/*
+  Close the file in zip opened with unzOpenCurrentFile
+  Return UNZ_CRCERROR if all the file was read but the CRC is not good
+*/
+
+extern int ZEXPORT unzReadCurrentFile OF((unzFile file,
+                      voidp buf,
+                      unsigned len));
+/*
+  Read bytes from the current file (opened by unzOpenCurrentFile)
+  buf contain buffer where data must be copied
+  len the size of buf.
+
+  return the number of byte copied if somes bytes are copied
+  return 0 if the end of file was reached
+  return <0 with error code if there is an error
+    (UNZ_ERRNO for IO error, or zLib error for uncompress error)
+*/
+
+extern z_off_t ZEXPORT unztell OF((unzFile file));
+/*
+  Give the current position in uncompressed data
+*/
+
+extern int ZEXPORT unzeof OF((unzFile file));
+/*
+  return 1 if the end of file was reached, 0 elsewhere
+*/
+
+extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file,
+                                             voidp buf,
+                                             unsigned len));
+/*
+  Read extra field from the current file (opened by unzOpenCurrentFile)
+  This is the local-header version of the extra field (sometimes, there is
+    more info in the local-header version than in the central-header)
+
+  if buf==NULL, it return the size of the local extra field
+
+  if buf!=NULL, len is the size of the buffer, the extra header is copied in
+    buf.
+  the return value is the number of bytes copied in buf, or (if <0)
+    the error code
+*/
+
+/***************************************************************************/
+
+/* Get the current file offset */
+extern uLong ZEXPORT unzGetOffset (unzFile file);
+
+/* Set the current file offset */
+extern int ZEXPORT unzSetOffset (unzFile file, uLong pos);
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _unz_H */

deps/zlib/contrib/minizip/zip.h

@@ -0,0 +1,237 @@
+/* zip.h -- IO for compress .zip files using zlib
+   Version 1.01e, February 12th, 2005
+
+   Copyright (C) 1998-2005 Gilles Vollant
+
+   This unzip package allow creates .ZIP file, compatible with PKZip 2.04g
+     WinZip, InfoZip tools and compatible.
+   Multi volume ZipFile (span) are not supported.
+   Encryption compatible with pkzip 2.04g only supported
+   Old compressions used by old PKZip 1.x are not supported
+
+  For uncompress .zip file, look at unzip.h
+
+
+   I WAIT FEEDBACK at mail info@winimage.com
+   Visit also http://www.winimage.com/zLibDll/unzip.html for evolution
+
+   Condition of use and distribution are the same than zlib :
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+
+*/
+
+/* for more info about .ZIP format, see
+      http://www.info-zip.org/pub/infozip/doc/appnote-981119-iz.zip
+      http://www.info-zip.org/pub/infozip/doc/
+   PkWare has also a specification at :
+      ftp://ftp.pkware.com/probdesc.zip
+*/
+
+#ifndef _zip_H
+#define _zip_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(USE_SYSTEM_ZLIB)
+#include <zlib.h>
+#else
+#include "zlib.h"
+#endif
+
+#ifndef _ZLIBIOAPI_H
+#include "ioapi.h"
+#endif
+
+#if defined(STRICTZIP) || defined(STRICTZIPUNZIP)
+/* like the STRICT of WIN32, we define a pointer that cannot be converted
+    from (void*) without cast */
+typedef struct TagzipFile__ { int unused; } zipFile__;
+typedef zipFile__ *zipFile;
+#else
+typedef voidp zipFile;
+#endif
+
+#define ZIP_OK                          (0)
+#define ZIP_EOF                         (0)
+#define ZIP_ERRNO                       (Z_ERRNO)
+#define ZIP_PARAMERROR                  (-102)
+#define ZIP_BADZIPFILE                  (-103)
+#define ZIP_INTERNALERROR               (-104)
+
+#ifndef DEF_MEM_LEVEL
+#  if MAX_MEM_LEVEL >= 8
+#    define DEF_MEM_LEVEL 8
+#  else
+#    define DEF_MEM_LEVEL  MAX_MEM_LEVEL
+#  endif
+#endif
+/* default memLevel */
+
+/* tm_zip contain date/time info */
+typedef struct tm_zip_s
+{
+    uInt tm_sec;            /* seconds after the minute - [0,59] */
+    uInt tm_min;            /* minutes after the hour - [0,59] */
+    uInt tm_hour;           /* hours since midnight - [0,23] */
+    uInt tm_mday;           /* day of the month - [1,31] */
+    uInt tm_mon;            /* months since January - [0,11] */
+    uInt tm_year;           /* years - [1980..2044] */
+} tm_zip;
+
+typedef struct
+{
+    tm_zip      tmz_date;       /* date in understandable format           */
+    uLong       dosDate;       /* if dos_date == 0, tmu_date is used      */
+/*    uLong       flag;        */   /* general purpose bit flag        2 bytes */
+
+    uLong       internal_fa;    /* internal file attributes        2 bytes */
+    uLong       external_fa;    /* external file attributes        4 bytes */
+} zip_fileinfo;
+
+typedef const char* zipcharpc;
+
+
+#define APPEND_STATUS_CREATE        (0)
+#define APPEND_STATUS_CREATEAFTER   (1)
+#define APPEND_STATUS_ADDINZIP      (2)
+
+extern zipFile ZEXPORT zipOpen OF((const char *pathname, int append));
+/*
+  Create a zipfile.
+     pathname contain on Windows XP a filename like "c:\\zlib\\zlib113.zip" or on
+       an Unix computer "zlib/zlib113.zip".
+     if the file pathname exist and append==APPEND_STATUS_CREATEAFTER, the zip
+       will be created at the end of the file.
+         (useful if the file contain a self extractor code)
+     if the file pathname exist and append==APPEND_STATUS_ADDINZIP, we will
+       add files in existing zip (be sure you don't add file that doesn't exist)
+     If the zipfile cannot be opened, the return value is NULL.
+     Else, the return value is a zipFile Handle, usable with other function
+       of this zip package.
+*/
+
+/* Note : there is no delete function into a zipfile.
+   If you want delete file into a zipfile, you must open a zipfile, and create another
+   Of couse, you can use RAW reading and writing to copy the file you did not want delte
+*/
+
+extern zipFile ZEXPORT zipOpen2 OF((const char *pathname,
+                                   int append,
+                                   zipcharpc* globalcomment,
+                                   zlib_filefunc_def* pzlib_filefunc_def));
+
+extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file,
+                       const char* filename,
+                       const zip_fileinfo* zipfi,
+                       const void* extrafield_local,
+                       uInt size_extrafield_local,
+                       const void* extrafield_global,
+                       uInt size_extrafield_global,
+                       const char* comment,
+                       int method,
+                       int level));
+/*
+  Open a file in the ZIP for writing.
+  filename : the filename in zip (if NULL, '-' without quote will be used
+  *zipfi contain supplemental information
+  if extrafield_local!=NULL and size_extrafield_local>0, extrafield_local
+    contains the extrafield data the the local header
+  if extrafield_global!=NULL and size_extrafield_global>0, extrafield_global
+    contains the extrafield data the the local header
+  if comment != NULL, comment contain the comment string
+  method contain the compression method (0 for store, Z_DEFLATED for deflate)
+  level contain the level of compression (can be Z_DEFAULT_COMPRESSION)
+*/
+
+
+extern int ZEXPORT zipOpenNewFileInZip2 OF((zipFile file,
+                                            const char* filename,
+                                            const zip_fileinfo* zipfi,
+                                            const void* extrafield_local,
+                                            uInt size_extrafield_local,
+                                            const void* extrafield_global,
+                                            uInt size_extrafield_global,
+                                            const char* comment,
+                                            int method,
+                                            int level,
+                                            int raw));
+
+/*
+  Same than zipOpenNewFileInZip, except if raw=1, we write raw file
+ */
+
+extern int ZEXPORT zipOpenNewFileInZip3 OF((zipFile file,
+                                            const char* filename,
+                                            const zip_fileinfo* zipfi,
+                                            const void* extrafield_local,
+                                            uInt size_extrafield_local,
+                                            const void* extrafield_global,
+                                            uInt size_extrafield_global,
+                                            const char* comment,
+                                            int method,
+                                            int level,
+                                            int raw,
+                                            int windowBits,
+                                            int memLevel,
+                                            int strategy,
+                                            const char* password,
+                                            uLong crcForCtypting));
+
+/*
+  Same than zipOpenNewFileInZip2, except
+    windowBits,memLevel,,strategy : see parameter strategy in deflateInit2
+    password : crypting password (NULL for no crypting)
+    crcForCtypting : crc of file to compress (needed for crypting)
+ */
+
+
+extern int ZEXPORT zipWriteInFileInZip OF((zipFile file,
+                       const void* buf,
+                       unsigned len));
+/*
+  Write data in the zipfile
+*/
+
+extern int ZEXPORT zipCloseFileInZip OF((zipFile file));
+/*
+  Close the current file in the zipfile
+*/
+
+extern int ZEXPORT zipCloseFileInZipRaw OF((zipFile file,
+                                            uLong uncompressed_size,
+                                            uLong crc32));
+/*
+  Close the current file in the zipfile, for fiel opened with
+    parameter raw=1 in zipOpenNewFileInZip2
+  uncompressed_size and crc32 are value for the uncompressed size
+*/
+
+extern int ZEXPORT zipClose OF((zipFile file,
+                const char* global_comment));
+/*
+  Close the zipfile
+*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _zip_H */

deps/zlib/crc32.c

@@ -0,0 +1,423 @@
+/* crc32.c -- compute the CRC-32 of a data stream
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
+ * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing
+ * tables for updating the shift register in one step with three exclusive-ors
+ * instead of four steps with four exclusive-ors.  This results in about a
+ * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
+ */
+
+/* @(#) $Id: crc32.c,v 3.6 2005/08/04 19:14:14 tor%cs.brown.edu Exp $ */
+
+/*
+  Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore
+  protection on the static variables used to control the first-use generation
+  of the crc tables.  Therefore, if you #define DYNAMIC_CRC_TABLE, you should
+  first call get_crc_table() to initialize the tables before allowing more than
+  one thread to use crc32().
+ */
+
+#ifdef MAKECRCH
+#  include <stdio.h>
+#  ifndef DYNAMIC_CRC_TABLE
+#    define DYNAMIC_CRC_TABLE
+#  endif /* !DYNAMIC_CRC_TABLE */
+#endif /* MAKECRCH */
+
+#include "zutil.h"      /* for STDC and FAR definitions */
+
+#define local static
+
+/* Find a four-byte integer type for crc32_little() and crc32_big(). */
+#ifndef NOBYFOUR
+#  ifdef STDC           /* need ANSI C limits.h to determine sizes */
+#    include <limits.h>
+#    define BYFOUR
+#    if (UINT_MAX == 0xffffffffUL)
+       typedef unsigned int u4;
+#    else
+#      if (ULONG_MAX == 0xffffffffUL)
+         typedef unsigned long u4;
+#      else
+#        if (USHRT_MAX == 0xffffffffUL)
+           typedef unsigned short u4;
+#        else
+#          undef BYFOUR     /* can't find a four-byte integer type! */
+#        endif
+#      endif
+#    endif
+#  endif /* STDC */
+#endif /* !NOBYFOUR */
+
+/* Definitions for doing the crc four data bytes at a time. */
+#ifdef BYFOUR
+#  define REV(w) (((w)>>24)+(((w)>>8)&0xff00)+ \
+                (((w)&0xff00)<<8)+(((w)&0xff)<<24))
+   local unsigned long crc32_little OF((unsigned long,
+                        const unsigned char FAR *, unsigned));
+   local unsigned long crc32_big OF((unsigned long,
+                        const unsigned char FAR *, unsigned));
+#  define TBLS 8
+#else
+#  define TBLS 1
+#endif /* BYFOUR */
+
+/* Local functions for crc concatenation */
+local unsigned long gf2_matrix_times OF((unsigned long *mat,
+                                         unsigned long vec));
+local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
+
+#ifdef DYNAMIC_CRC_TABLE
+
+local volatile int crc_table_empty = 1;
+local unsigned long FAR crc_table[TBLS][256];
+local void make_crc_table OF((void));
+#ifdef MAKECRCH
+   local void write_table OF((FILE *, const unsigned long FAR *));
+#endif /* MAKECRCH */
+/*
+  Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
+  x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
+
+  Polynomials over GF(2) are represented in binary, one bit per coefficient,
+  with the lowest powers in the most significant bit.  Then adding polynomials
+  is just exclusive-or, and multiplying a polynomial by x is a right shift by
+  one.  If we call the above polynomial p, and represent a byte as the
+  polynomial q, also with the lowest power in the most significant bit (so the
+  byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
+  where a mod b means the remainder after dividing a by b.
+
+  This calculation is done using the shift-register method of multiplying and
+  taking the remainder.  The register is initialized to zero, and for each
+  incoming bit, x^32 is added mod p to the register if the bit is a one (where
+  x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
+  x (which is shifting right by one and adding x^32 mod p if the bit shifted
+  out is a one).  We start with the highest power (least significant bit) of
+  q and repeat for all eight bits of q.
+
+  The first table is simply the CRC of all possible eight bit values.  This is
+  all the information needed to generate CRCs on data a byte at a time for all
+  combinations of CRC register values and incoming bytes.  The remaining tables
+  allow for word-at-a-time CRC calculation for both big-endian and little-
+  endian machines, where a word is four bytes.
+*/
+local void make_crc_table()
+{
+    unsigned long c;
+    int n, k;
+    unsigned long poly;                 /* polynomial exclusive-or pattern */
+    /* terms of polynomial defining this crc (except x^32): */
+    static volatile int first = 1;      /* flag to limit concurrent making */
+    static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
+
+    /* See if another task is already doing this (not thread-safe, but better
+       than nothing -- significantly reduces duration of vulnerability in
+       case the advice about DYNAMIC_CRC_TABLE is ignored) */
+    if (first) {
+        first = 0;
+
+        /* make exclusive-or pattern from polynomial (0xedb88320UL) */
+        poly = 0UL;
+        for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++)
+            poly |= 1UL << (31 - p[n]);
+
+        /* generate a crc for every 8-bit value */
+        for (n = 0; n < 256; n++) {
+            c = (unsigned long)n;
+            for (k = 0; k < 8; k++)
+                c = c & 1 ? poly ^ (c >> 1) : c >> 1;
+            crc_table[0][n] = c;
+        }
+
+#ifdef BYFOUR
+        /* generate crc for each value followed by one, two, and three zeros,
+           and then the byte reversal of those as well as the first table */
+        for (n = 0; n < 256; n++) {
+            c = crc_table[0][n];
+            crc_table[4][n] = REV(c);
+            for (k = 1; k < 4; k++) {
+                c = crc_table[0][c & 0xff] ^ (c >> 8);
+                crc_table[k][n] = c;
+                crc_table[k + 4][n] = REV(c);
+            }
+        }
+#endif /* BYFOUR */
+
+        crc_table_empty = 0;
+    }
+    else {      /* not first */
+        /* wait for the other guy to finish (not efficient, but rare) */
+        while (crc_table_empty)
+            ;
+    }
+
+#ifdef MAKECRCH
+    /* write out CRC tables to crc32.h */
+    {
+        FILE *out;
+
+        out = fopen("crc32.h", "w");
+        if (out == NULL) return;
+        fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
+        fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
+        fprintf(out, "local const unsigned long FAR ");
+        fprintf(out, "crc_table[TBLS][256] =\n{\n  {\n");
+        write_table(out, crc_table[0]);
+#  ifdef BYFOUR
+        fprintf(out, "#ifdef BYFOUR\n");
+        for (k = 1; k < 8; k++) {
+            fprintf(out, "  },\n  {\n");
+            write_table(out, crc_table[k]);
+        }
+        fprintf(out, "#endif\n");
+#  endif /* BYFOUR */
+        fprintf(out, "  }\n};\n");
+        fclose(out);
+    }
+#endif /* MAKECRCH */
+}
+
+#ifdef MAKECRCH
+local void write_table(out, table)
+    FILE *out;
+    const unsigned long FAR *table;
+{
+    int n;
+
+    for (n = 0; n < 256; n++)
+        fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : "    ", table[n],
+                n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
+}
+#endif /* MAKECRCH */
+
+#else /* !DYNAMIC_CRC_TABLE */
+/* ========================================================================
+ * Tables of CRC-32s of all single-byte values, made by make_crc_table().
+ */
+#include "crc32.h"
+#endif /* DYNAMIC_CRC_TABLE */
+
+/* =========================================================================
+ * This function can be used by asm versions of crc32()
+ */
+const unsigned long FAR * ZEXPORT get_crc_table()
+{
+#ifdef DYNAMIC_CRC_TABLE
+    if (crc_table_empty)
+        make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+    return (const unsigned long FAR *)crc_table;
+}
+
+/* ========================================================================= */
+#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8)
+#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
+
+/* ========================================================================= */
+unsigned long ZEXPORT crc32(crc, buf, len)
+    unsigned long crc;
+    const unsigned char FAR *buf;
+    unsigned len;
+{
+    if (buf == Z_NULL) return 0UL;
+
+#ifdef DYNAMIC_CRC_TABLE
+    if (crc_table_empty)
+        make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+
+#ifdef BYFOUR
+    if (sizeof(void *) == sizeof(ptrdiff_t)) {
+        u4 endian;
+
+        endian = 1;
+        if (*((unsigned char *)(&endian)))
+            return crc32_little(crc, buf, len);
+        else
+            return crc32_big(crc, buf, len);
+    }
+#endif /* BYFOUR */
+    crc = crc ^ 0xffffffffUL;
+    while (len >= 8) {
+        DO8;
+        len -= 8;
+    }
+    if (len) do {
+        DO1;
+    } while (--len);
+    return crc ^ 0xffffffffUL;
+}
+
+#ifdef BYFOUR
+
+/* ========================================================================= */
+#define DOLIT4 c ^= *buf4++; \
+        c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \
+            crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24]
+#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4
+
+/* ========================================================================= */
+local unsigned long crc32_little(crc, buf, len)
+    unsigned long crc;
+    const unsigned char FAR *buf;
+    unsigned len;
+{
+    register u4 c;
+    register const u4 FAR *buf4;
+
+    c = (u4)crc;
+    c = ~c;
+    while (len && ((ptrdiff_t)buf & 3)) {
+        c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+        len--;
+    }
+
+    buf4 = (const u4 FAR *)(const void FAR *)buf;
+    while (len >= 32) {
+        DOLIT32;
+        len -= 32;
+    }
+    while (len >= 4) {
+        DOLIT4;
+        len -= 4;
+    }
+    buf = (const unsigned char FAR *)buf4;
+
+    if (len) do {
+        c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+    } while (--len);
+    c = ~c;
+    return (unsigned long)c;
+}
+
+/* ========================================================================= */
+#define DOBIG4 c ^= *++buf4; \
+        c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \
+            crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24]
+#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4
+
+/* ========================================================================= */
+local unsigned long crc32_big(crc, buf, len)
+    unsigned long crc;
+    const unsigned char FAR *buf;
+    unsigned len;
+{
+    register u4 c;
+    register const u4 FAR *buf4;
+
+    c = REV((u4)crc);
+    c = ~c;
+    while (len && ((ptrdiff_t)buf & 3)) {
+        c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+        len--;
+    }
+
+    buf4 = (const u4 FAR *)(const void FAR *)buf;
+    buf4--;
+    while (len >= 32) {
+        DOBIG32;
+        len -= 32;
+    }
+    while (len >= 4) {
+        DOBIG4;
+        len -= 4;
+    }
+    buf4++;
+    buf = (const unsigned char FAR *)buf4;
+
+    if (len) do {
+        c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+    } while (--len);
+    c = ~c;
+    return (unsigned long)(REV(c));
+}
+
+#endif /* BYFOUR */
+
+#define GF2_DIM 32      /* dimension of GF(2) vectors (length of CRC) */
+
+/* ========================================================================= */
+local unsigned long gf2_matrix_times(mat, vec)
+    unsigned long *mat;
+    unsigned long vec;
+{
+    unsigned long sum;
+
+    sum = 0;
+    while (vec) {
+        if (vec & 1)
+            sum ^= *mat;
+        vec >>= 1;
+        mat++;
+    }
+    return sum;
+}
+
+/* ========================================================================= */
+local void gf2_matrix_square(square, mat)
+    unsigned long *square;
+    unsigned long *mat;
+{
+    int n;
+
+    for (n = 0; n < GF2_DIM; n++)
+        square[n] = gf2_matrix_times(mat, mat[n]);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT crc32_combine(crc1, crc2, len2)
+    uLong crc1;
+    uLong crc2;
+    z_off_t len2;
+{
+    int n;
+    unsigned long row;
+    unsigned long even[GF2_DIM];    /* even-power-of-two zeros operator */
+    unsigned long odd[GF2_DIM];     /* odd-power-of-two zeros operator */
+
+    /* degenerate case */
+    if (len2 == 0)
+        return crc1;
+
+    /* put operator for one zero bit in odd */
+    odd[0] = 0xedb88320L;           /* CRC-32 polynomial */
+    row = 1;
+    for (n = 1; n < GF2_DIM; n++) {
+        odd[n] = row;
+        row <<= 1;
+    }
+
+    /* put operator for two zero bits in even */
+    gf2_matrix_square(even, odd);
+
+    /* put operator for four zero bits in odd */
+    gf2_matrix_square(odd, even);
+
+    /* apply len2 zeros to crc1 (first square will put the operator for one
+       zero byte, eight zero bits, in even) */
+    do {
+        /* apply zeros operator for this bit of len2 */
+        gf2_matrix_square(even, odd);
+        if (len2 & 1)
+            crc1 = gf2_matrix_times(even, crc1);
+        len2 >>= 1;
+
+        /* if no more bits set, then done */
+        if (len2 == 0)
+            break;
+
+        /* another iteration of the loop with odd and even swapped */
+        gf2_matrix_square(odd, even);
+        if (len2 & 1)
+            crc1 = gf2_matrix_times(odd, crc1);
+        len2 >>= 1;
+
+        /* if no more bits set, then done */
+    } while (len2 != 0);
+
+    /* return combined crc */
+    crc1 ^= crc2;
+    return crc1;
+}

deps/zlib/crc32.h

@@ -0,0 +1,441 @@
+/* crc32.h -- tables for rapid CRC calculation
+ * Generated automatically by crc32.c
+ */
+
+local const unsigned long FAR crc_table[TBLS][256] =
+{
+  {
+    0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,
+    0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL,
+    0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL,
+    0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL,
+    0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL,
+    0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL,
+    0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL,
+    0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL,
+    0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL,
+    0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL,
+    0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL,
+    0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL,
+    0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL,
+    0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL,
+    0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL,
+    0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL,
+    0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL,
+    0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL,
+    0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL,
+    0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL,
+    0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL,
+    0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL,
+    0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL,
+    0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL,
+    0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL,
+    0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL,
+    0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL,
+    0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL,
+    0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL,
+    0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL,
+    0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL,
+    0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL,
+    0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL,
+    0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL,
+    0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL,
+    0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL,
+    0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL,
+    0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL,
+    0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL,
+    0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL,
+    0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL,
+    0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL,
+    0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL,
+    0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL,
+    0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL,
+    0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL,
+    0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL,
+    0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL,
+    0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL,
+    0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL,
+    0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL,
+    0x2d02ef8dUL
+#ifdef BYFOUR
+  },
+  {
+    0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL,
+    0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL,
+    0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL,
+    0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL,
+    0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL,
+    0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL,
+    0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL,
+    0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL,
+    0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL,
+    0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL,
+    0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL,
+    0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL,
+    0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL,
+    0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL,
+    0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL,
+    0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL,
+    0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL,
+    0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL,
+    0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL,
+    0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL,
+    0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL,
+    0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL,
+    0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL,
+    0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL,
+    0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL,
+    0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL,
+    0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL,
+    0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL,
+    0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL,
+    0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL,
+    0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL,
+    0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL,
+    0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL,
+    0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL,
+    0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL,
+    0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL,
+    0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL,
+    0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL,
+    0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL,
+    0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL,
+    0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL,
+    0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL,
+    0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL,
+    0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL,
+    0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL,
+    0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL,
+    0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL,
+    0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL,
+    0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL,
+    0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL,
+    0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL,
+    0x9324fd72UL
+  },
+  {
+    0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL,
+    0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL,
+    0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL,
+    0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL,
+    0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL,
+    0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL,
+    0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL,
+    0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL,
+    0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL,
+    0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL,
+    0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL,
+    0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL,
+    0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL,
+    0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL,
+    0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL,
+    0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL,
+    0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL,
+    0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL,
+    0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL,
+    0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL,
+    0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL,
+    0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL,
+    0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL,
+    0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL,
+    0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL,
+    0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL,
+    0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL,
+    0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL,
+    0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL,
+    0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL,
+    0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL,
+    0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL,
+    0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL,
+    0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL,
+    0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL,
+    0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL,
+    0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL,
+    0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL,
+    0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL,
+    0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL,
+    0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL,
+    0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL,
+    0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL,
+    0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL,
+    0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL,
+    0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL,
+    0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL,
+    0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL,
+    0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL,
+    0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL,
+    0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL,
+    0xbe9834edUL
+  },
+  {
+    0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL,
+    0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL,
+    0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL,
+    0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL,
+    0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL,
+    0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL,
+    0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL,
+    0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL,
+    0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL,
+    0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL,
+    0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL,
+    0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL,
+    0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL,
+    0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL,
+    0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL,
+    0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL,
+    0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL,
+    0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL,
+    0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL,
+    0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL,
+    0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL,
+    0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL,
+    0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL,
+    0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL,
+    0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL,
+    0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL,
+    0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL,
+    0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL,
+    0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL,
+    0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL,
+    0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL,
+    0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL,
+    0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL,
+    0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL,
+    0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL,
+    0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL,
+    0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL,
+    0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL,
+    0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL,
+    0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL,
+    0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL,
+    0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL,
+    0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL,
+    0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL,
+    0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL,
+    0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL,
+    0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL,
+    0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL,
+    0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL,
+    0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL,
+    0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL,
+    0xde0506f1UL
+  },
+  {
+    0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL,
+    0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL,
+    0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL,
+    0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL,
+    0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL,
+    0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL,
+    0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL,
+    0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL,
+    0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL,
+    0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL,
+    0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL,
+    0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL,
+    0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL,
+    0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL,
+    0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL,
+    0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL,
+    0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL,
+    0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL,
+    0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL,
+    0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL,
+    0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL,
+    0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL,
+    0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL,
+    0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL,
+    0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL,
+    0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL,
+    0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL,
+    0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL,
+    0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL,
+    0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL,
+    0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL,
+    0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL,
+    0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL,
+    0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL,
+    0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL,
+    0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL,
+    0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL,
+    0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL,
+    0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL,
+    0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL,
+    0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL,
+    0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL,
+    0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL,
+    0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL,
+    0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL,
+    0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL,
+    0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL,
+    0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL,
+    0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL,
+    0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL,
+    0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL,
+    0x8def022dUL
+  },
+  {
+    0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL,
+    0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL,
+    0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL,
+    0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL,
+    0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL,
+    0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL,
+    0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL,
+    0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL,
+    0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL,
+    0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL,
+    0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL,
+    0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL,
+    0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL,
+    0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL,
+    0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL,
+    0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL,
+    0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL,
+    0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL,
+    0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL,
+    0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL,
+    0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL,
+    0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL,
+    0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL,
+    0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL,
+    0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL,
+    0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL,
+    0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL,
+    0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL,
+    0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL,
+    0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL,
+    0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL,
+    0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL,
+    0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL,
+    0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL,
+    0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL,
+    0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL,
+    0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL,
+    0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL,
+    0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL,
+    0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL,
+    0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL,
+    0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL,
+    0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL,
+    0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL,
+    0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL,
+    0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL,
+    0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL,
+    0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL,
+    0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL,
+    0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL,
+    0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL,
+    0x72fd2493UL
+  },
+  {
+    0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL,
+    0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL,
+    0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL,
+    0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL,
+    0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL,
+    0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL,
+    0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL,
+    0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL,
+    0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL,
+    0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL,
+    0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL,
+    0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL,
+    0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL,
+    0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL,
+    0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL,
+    0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL,
+    0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL,
+    0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL,
+    0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL,
+    0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL,
+    0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL,
+    0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL,
+    0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL,
+    0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL,
+    0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL,
+    0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL,
+    0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL,
+    0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL,
+    0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL,
+    0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL,
+    0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL,
+    0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL,
+    0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL,
+    0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL,
+    0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL,
+    0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL,
+    0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL,
+    0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL,
+    0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL,
+    0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL,
+    0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL,
+    0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL,
+    0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL,
+    0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL,
+    0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL,
+    0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL,
+    0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL,
+    0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL,
+    0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL,
+    0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL,
+    0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL,
+    0xed3498beUL
+  },
+  {
+    0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL,
+    0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL,
+    0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL,
+    0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL,
+    0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL,
+    0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL,
+    0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL,
+    0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL,
+    0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL,
+    0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL,
+    0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL,
+    0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL,
+    0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL,
+    0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL,
+    0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL,
+    0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL,
+    0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL,
+    0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL,
+    0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL,
+    0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL,
+    0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL,
+    0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL,
+    0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL,
+    0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL,
+    0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL,
+    0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL,
+    0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL,
+    0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL,
+    0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL,
+    0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL,
+    0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL,
+    0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL,
+    0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL,
+    0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL,
+    0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL,
+    0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL,
+    0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL,
+    0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL,
+    0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL,
+    0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL,
+    0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL,
+    0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL,
+    0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL,
+    0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL,
+    0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL,
+    0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL,
+    0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL,
+    0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL,
+    0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL,
+    0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL,
+    0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL,
+    0xf10605deUL
+#endif
+  }
+};

deps/zlib/deflate.h

@@ -0,0 +1,331 @@
+/* deflate.h -- internal compression state
+ * Copyright (C) 1995-2004 Jean-loup Gailly
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id: deflate.h,v 3.6 2005/08/04 19:14:14 tor%cs.brown.edu Exp $ */
+
+#ifndef DEFLATE_H
+#define DEFLATE_H
+
+#include "zutil.h"
+
+/* define NO_GZIP when compiling if you want to disable gzip header and
+   trailer creation by deflate().  NO_GZIP would be used to avoid linking in
+   the crc code when it is not needed.  For shared libraries, gzip encoding
+   should be left enabled. */
+#ifndef NO_GZIP
+#  define GZIP
+#endif
+
+/* ===========================================================================
+ * Internal compression state.
+ */
+
+#define LENGTH_CODES 29
+/* number of length codes, not counting the special END_BLOCK code */
+
+#define LITERALS  256
+/* number of literal bytes 0..255 */
+
+#define L_CODES (LITERALS+1+LENGTH_CODES)
+/* number of Literal or Length codes, including the END_BLOCK code */
+
+#define D_CODES   30
+/* number of distance codes */
+
+#define BL_CODES  19
+/* number of codes used to transfer the bit lengths */
+
+#define HEAP_SIZE (2*L_CODES+1)
+/* maximum heap size */
+
+#define MAX_BITS 15
+/* All codes must not exceed MAX_BITS bits */
+
+#define INIT_STATE    42
+#define EXTRA_STATE   69
+#define NAME_STATE    73
+#define COMMENT_STATE 91
+#define HCRC_STATE   103
+#define BUSY_STATE   113
+#define FINISH_STATE 666
+/* Stream status */
+
+
+/* Data structure describing a single value and its code string. */
+typedef struct ct_data_s {
+    union {
+        ush  freq;       /* frequency count */
+        ush  code;       /* bit string */
+    } fc;
+    union {
+        ush  dad;        /* father node in Huffman tree */
+        ush  len;        /* length of bit string */
+    } dl;
+} FAR ct_data;
+
+#define Freq fc.freq
+#define Code fc.code
+#define Dad  dl.dad
+#define Len  dl.len
+
+typedef struct static_tree_desc_s  static_tree_desc;
+
+typedef struct tree_desc_s {
+    ct_data *dyn_tree;           /* the dynamic tree */
+    int     max_code;            /* largest code with non zero frequency */
+    static_tree_desc *stat_desc; /* the corresponding static tree */
+} FAR tree_desc;
+
+typedef ush Pos;
+typedef Pos FAR Posf;
+typedef unsigned IPos;
+
+/* A Pos is an index in the character window. We use short instead of int to
+ * save space in the various tables. IPos is used only for parameter passing.
+ */
+
+typedef struct internal_state {
+    z_streamp strm;      /* pointer back to this zlib stream */
+    int   status;        /* as the name implies */
+    Bytef *pending_buf;  /* output still pending */
+    ulg   pending_buf_size; /* size of pending_buf */
+    Bytef *pending_out;  /* next pending byte to output to the stream */
+    uInt   pending;      /* nb of bytes in the pending buffer */
+    int   wrap;          /* bit 0 true for zlib, bit 1 true for gzip */
+    gz_headerp  gzhead;  /* gzip header information to write */
+    uInt   gzindex;      /* where in extra, name, or comment */
+    Byte  method;        /* STORED (for zip only) or DEFLATED */
+    int   last_flush;    /* value of flush param for previous deflate call */
+
+                /* used by deflate.c: */
+
+    uInt  w_size;        /* LZ77 window size (32K by default) */
+    uInt  w_bits;        /* log2(w_size)  (8..16) */
+    uInt  w_mask;        /* w_size - 1 */
+
+    Bytef *window;
+    /* Sliding window. Input bytes are read into the second half of the window,
+     * and move to the first half later to keep a dictionary of at least wSize
+     * bytes. With this organization, matches are limited to a distance of
+     * wSize-MAX_MATCH bytes, but this ensures that IO is always
+     * performed with a length multiple of the block size. Also, it limits
+     * the window size to 64K, which is quite useful on MSDOS.
+     * To do: use the user input buffer as sliding window.
+     */
+
+    ulg window_size;
+    /* Actual size of window: 2*wSize, except when the user input buffer
+     * is directly used as sliding window.
+     */
+
+    Posf *prev;
+    /* Link to older string with same hash index. To limit the size of this
+     * array to 64K, this link is maintained only for the last 32K strings.
+     * An index in this array is thus a window index modulo 32K.
+     */
+
+    Posf *head; /* Heads of the hash chains or NIL. */
+
+    uInt  ins_h;          /* hash index of string to be inserted */
+    uInt  hash_size;      /* number of elements in hash table */
+    uInt  hash_bits;      /* log2(hash_size) */
+    uInt  hash_mask;      /* hash_size-1 */
+
+    uInt  hash_shift;
+    /* Number of bits by which ins_h must be shifted at each input
+     * step. It must be such that after MIN_MATCH steps, the oldest
+     * byte no longer takes part in the hash key, that is:
+     *   hash_shift * MIN_MATCH >= hash_bits
+     */
+
+    long block_start;
+    /* Window position at the beginning of the current output block. Gets
+     * negative when the window is moved backwards.
+     */
+
+    uInt match_length;           /* length of best match */
+    IPos prev_match;             /* previous match */
+    int match_available;         /* set if previous match exists */
+    uInt strstart;               /* start of string to insert */
+    uInt match_start;            /* start of matching string */
+    uInt lookahead;              /* number of valid bytes ahead in window */
+
+    uInt prev_length;
+    /* Length of the best match at previous step. Matches not greater than this
+     * are discarded. This is used in the lazy match evaluation.
+     */
+
+    uInt max_chain_length;
+    /* To speed up deflation, hash chains are never searched beyond this
+     * length.  A higher limit improves compression ratio but degrades the
+     * speed.
+     */
+
+    uInt max_lazy_match;
+    /* Attempt to find a better match only when the current match is strictly
+     * smaller than this value. This mechanism is used only for compression
+     * levels >= 4.
+     */
+#   define max_insert_length  max_lazy_match
+    /* Insert new strings in the hash table only if the match length is not
+     * greater than this length. This saves time but degrades compression.
+     * max_insert_length is used only for compression levels <= 3.
+     */
+
+    int level;    /* compression level (1..9) */
+    int strategy; /* favor or force Huffman coding*/
+
+    uInt good_match;
+    /* Use a faster search when the previous match is longer than this */
+
+    int nice_match; /* Stop searching when current match exceeds this */
+
+                /* used by trees.c: */
+    /* Didn't use ct_data typedef below to supress compiler warning */
+    struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
+    struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
+    struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
+
+    struct tree_desc_s l_desc;               /* desc. for literal tree */
+    struct tree_desc_s d_desc;               /* desc. for distance tree */
+    struct tree_desc_s bl_desc;              /* desc. for bit length tree */
+
+    ush bl_count[MAX_BITS+1];
+    /* number of codes at each bit length for an optimal tree */
+
+    int heap[2*L_CODES+1];      /* heap used to build the Huffman trees */
+    int heap_len;               /* number of elements in the heap */
+    int heap_max;               /* element of largest frequency */
+    /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
+     * The same heap array is used to build all trees.
+     */
+
+    uch depth[2*L_CODES+1];
+    /* Depth of each subtree used as tie breaker for trees of equal frequency
+     */
+
+    uchf *l_buf;          /* buffer for literals or lengths */
+
+    uInt  lit_bufsize;
+    /* Size of match buffer for literals/lengths.  There are 4 reasons for
+     * limiting lit_bufsize to 64K:
+     *   - frequencies can be kept in 16 bit counters
+     *   - if compression is not successful for the first block, all input
+     *     data is still in the window so we can still emit a stored block even
+     *     when input comes from standard input.  (This can also be done for
+     *     all blocks if lit_bufsize is not greater than 32K.)
+     *   - if compression is not successful for a file smaller than 64K, we can
+     *     even emit a stored file instead of a stored block (saving 5 bytes).
+     *     This is applicable only for zip (not gzip or zlib).
+     *   - creating new Huffman trees less frequently may not provide fast
+     *     adaptation to changes in the input data statistics. (Take for
+     *     example a binary file with poorly compressible code followed by
+     *     a highly compressible string table.) Smaller buffer sizes give
+     *     fast adaptation but have of course the overhead of transmitting
+     *     trees more frequently.
+     *   - I can't count above 4
+     */
+
+    uInt last_lit;      /* running index in l_buf */
+
+    ushf *d_buf;
+    /* Buffer for distances. To simplify the code, d_buf and l_buf have
+     * the same number of elements. To use different lengths, an extra flag
+     * array would be necessary.
+     */
+
+    ulg opt_len;        /* bit length of current block with optimal trees */
+    ulg static_len;     /* bit length of current block with static trees */
+    uInt matches;       /* number of string matches in current block */
+    int last_eob_len;   /* bit length of EOB code for last block */
+
+#ifdef DEBUG
+    ulg compressed_len; /* total bit length of compressed file mod 2^32 */
+    ulg bits_sent;      /* bit length of compressed data sent mod 2^32 */
+#endif
+
+    ush bi_buf;
+    /* Output buffer. bits are inserted starting at the bottom (least
+     * significant bits).
+     */
+    int bi_valid;
+    /* Number of valid bits in bi_buf.  All bits above the last valid bit
+     * are always zero.
+     */
+
+} FAR deflate_state;
+
+/* Output a byte on the stream.
+ * IN assertion: there is enough room in pending_buf.
+ */
+#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
+
+
+#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
+/* Minimum amount of lookahead, except at the end of the input file.
+ * See deflate.c for comments about the MIN_MATCH+1.
+ */
+
+#define MAX_DIST(s)  ((s)->w_size-MIN_LOOKAHEAD)
+/* In order to simplify the code, particularly on 16 bit machines, match
+ * distances are limited to MAX_DIST instead of WSIZE.
+ */
+
+        /* in trees.c */
+void _tr_init         OF((deflate_state *s));
+int  _tr_tally        OF((deflate_state *s, unsigned dist, unsigned lc));
+void _tr_flush_block  OF((deflate_state *s, charf *buf, ulg stored_len,
+                          int eof));
+void _tr_align        OF((deflate_state *s));
+void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
+                          int eof));
+
+#define d_code(dist) \
+   ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
+/* Mapping from a distance to a distance code. dist is the distance - 1 and
+ * must not have side effects. _dist_code[256] and _dist_code[257] are never
+ * used.
+ */
+
+#ifndef DEBUG
+/* Inline versions of _tr_tally for speed: */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+  extern uch _length_code[];
+  extern uch _dist_code[];
+#else
+  extern const uch _length_code[];
+  extern const uch _dist_code[];
+#endif
+
+# define _tr_tally_lit(s, c, flush) \
+  { uch cc = (c); \
+    s->d_buf[s->last_lit] = 0; \
+    s->l_buf[s->last_lit++] = cc; \
+    s->dyn_ltree[cc].Freq++; \
+    flush = (s->last_lit == s->lit_bufsize-1); \
+   }
+# define _tr_tally_dist(s, distance, length, flush) \
+  { uch len = (length); \
+    ush dist = (distance); \
+    s->d_buf[s->last_lit] = dist; \
+    s->l_buf[s->last_lit++] = len; \
+    dist--; \
+    s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
+    s->dyn_dtree[d_code(dist)].Freq++; \
+    flush = (s->last_lit == s->lit_bufsize-1); \
+  }
+#else
+# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
+# define _tr_tally_dist(s, distance, length, flush) \
+              flush = _tr_tally(s, distance, length)
+#endif
+
+#endif /* DEFLATE_H */

deps/zlib/infback.c

@@ -0,0 +1,623 @@
+/* infback.c -- inflate using a call-back interface
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+   This code is largely copied from inflate.c.  Normally either infback.o or
+   inflate.o would be linked into an application--not both.  The interface
+   with inffast.c is retained so that optimized assembler-coded versions of
+   inflate_fast() can be used with either inflate.c or infback.c.
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+/* function prototypes */
+local void fixedtables OF((struct inflate_state FAR *state));
+
+/*
+   strm provides memory allocation functions in zalloc and zfree, or
+   Z_NULL to use the library memory allocation functions.
+
+   windowBits is in the range 8..15, and window is a user-supplied
+   window and output buffer that is 2**windowBits bytes.
+ */
+int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size)
+z_streamp strm;
+int windowBits;
+unsigned char FAR *window;
+const char *version;
+int stream_size;
+{
+    struct inflate_state FAR *state;
+
+    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+        stream_size != (int)(sizeof(z_stream)))
+        return Z_VERSION_ERROR;
+    if (strm == Z_NULL || window == Z_NULL ||
+        windowBits < 8 || windowBits > 15)
+        return Z_STREAM_ERROR;
+    strm->msg = Z_NULL;                 /* in case we return an error */
+    if (strm->zalloc == (alloc_func)0) {
+        strm->zalloc = zcalloc;
+        strm->opaque = (voidpf)0;
+    }
+    if (strm->zfree == (free_func)0) strm->zfree = zcfree;
+    state = (struct inflate_state FAR *)ZALLOC(strm, 1,
+                                               sizeof(struct inflate_state));
+    if (state == Z_NULL) return Z_MEM_ERROR;
+    Tracev((stderr, "inflate: allocated\n"));
+    strm->state = (struct internal_state FAR *)state;
+    state->dmax = 32768U;
+    state->wbits = windowBits;
+    state->wsize = 1U << windowBits;
+    state->window = window;
+    state->write = 0;
+    state->whave = 0;
+    return Z_OK;
+}
+
+/*
+   Return state with length and distance decoding tables and index sizes set to
+   fixed code decoding.  Normally this returns fixed tables from inffixed.h.
+   If BUILDFIXED is defined, then instead this routine builds the tables the
+   first time it's called, and returns those tables the first time and
+   thereafter.  This reduces the size of the code by about 2K bytes, in
+   exchange for a little execution time.  However, BUILDFIXED should not be
+   used for threaded applications, since the rewriting of the tables and virgin
+   may not be thread-safe.
+ */
+local void fixedtables(state)
+struct inflate_state FAR *state;
+{
+#ifdef BUILDFIXED
+    static int virgin = 1;
+    static code *lenfix, *distfix;
+    static code fixed[544];
+
+    /* build fixed huffman tables if first call (may not be thread safe) */
+    if (virgin) {
+        unsigned sym, bits;
+        static code *next;
+
+        /* literal/length table */
+        sym = 0;
+        while (sym < 144) state->lens[sym++] = 8;
+        while (sym < 256) state->lens[sym++] = 9;
+        while (sym < 280) state->lens[sym++] = 7;
+        while (sym < 288) state->lens[sym++] = 8;
+        next = fixed;
+        lenfix = next;
+        bits = 9;
+        inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
+
+        /* distance table */
+        sym = 0;
+        while (sym < 32) state->lens[sym++] = 5;
+        distfix = next;
+        bits = 5;
+        inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
+
+        /* do this just once */
+        virgin = 0;
+    }
+#else /* !BUILDFIXED */
+#   include "inffixed.h"
+#endif /* BUILDFIXED */
+    state->lencode = lenfix;
+    state->lenbits = 9;
+    state->distcode = distfix;
+    state->distbits = 5;
+}
+
+/* Macros for inflateBack(): */
+
+/* Load returned state from inflate_fast() */
+#define LOAD() \
+    do { \
+        put = strm->next_out; \
+        left = strm->avail_out; \
+        next = strm->next_in; \
+        have = strm->avail_in; \
+        hold = state->hold; \
+        bits = state->bits; \
+    } while (0)
+
+/* Set state from registers for inflate_fast() */
+#define RESTORE() \
+    do { \
+        strm->next_out = put; \
+        strm->avail_out = left; \
+        strm->next_in = next; \
+        strm->avail_in = have; \
+        state->hold = hold; \
+        state->bits = bits; \
+    } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+    do { \
+        hold = 0; \
+        bits = 0; \
+    } while (0)
+
+/* Assure that some input is available.  If input is requested, but denied,
+   then return a Z_BUF_ERROR from inflateBack(). */
+#define PULL() \
+    do { \
+        if (have == 0) { \
+            have = in(in_desc, &next); \
+            if (have == 0) { \
+                next = Z_NULL; \
+                ret = Z_BUF_ERROR; \
+                goto inf_leave; \
+            } \
+        } \
+    } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflateBack()
+   with an error if there is no input available. */
+#define PULLBYTE() \
+    do { \
+        PULL(); \
+        have--; \
+        hold += (unsigned long)(*next++) << bits; \
+        bits += 8; \
+    } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator.  If there is
+   not enough available input to do that, then return from inflateBack() with
+   an error. */
+#define NEEDBITS(n) \
+    do { \
+        while (bits < (unsigned)(n)) \
+            PULLBYTE(); \
+    } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+    ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+    do { \
+        hold >>= (n); \
+        bits -= (unsigned)(n); \
+    } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+    do { \
+        hold >>= bits & 7; \
+        bits -= bits & 7; \
+    } while (0)
+
+/* Assure that some output space is available, by writing out the window
+   if it's full.  If the write fails, return from inflateBack() with a
+   Z_BUF_ERROR. */
+#define ROOM() \
+    do { \
+        if (left == 0) { \
+            put = state->window; \
+            left = state->wsize; \
+            state->whave = left; \
+            if (out(out_desc, put, left)) { \
+                ret = Z_BUF_ERROR; \
+                goto inf_leave; \
+            } \
+        } \
+    } while (0)
+
+/*
+   strm provides the memory allocation functions and window buffer on input,
+   and provides information on the unused input on return.  For Z_DATA_ERROR
+   returns, strm will also provide an error message.
+
+   in() and out() are the call-back input and output functions.  When
+   inflateBack() needs more input, it calls in().  When inflateBack() has
+   filled the window with output, or when it completes with data in the
+   window, it calls out() to write out the data.  The application must not
+   change the provided input until in() is called again or inflateBack()
+   returns.  The application must not change the window/output buffer until
+   inflateBack() returns.
+
+   in() and out() are called with a descriptor parameter provided in the
+   inflateBack() call.  This parameter can be a structure that provides the
+   information required to do the read or write, as well as accumulated
+   information on the input and output such as totals and check values.
+
+   in() should return zero on failure.  out() should return non-zero on
+   failure.  If either in() or out() fails, than inflateBack() returns a
+   Z_BUF_ERROR.  strm->next_in can be checked for Z_NULL to see whether it
+   was in() or out() that caused in the error.  Otherwise,  inflateBack()
+   returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format
+   error, or Z_MEM_ERROR if it could not allocate memory for the state.
+   inflateBack() can also return Z_STREAM_ERROR if the input parameters
+   are not correct, i.e. strm is Z_NULL or the state was not initialized.
+ */
+int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc)
+z_streamp strm;
+in_func in;
+void FAR *in_desc;
+out_func out;
+void FAR *out_desc;
+{
+    struct inflate_state FAR *state;
+    unsigned char FAR *next;    /* next input */
+    unsigned char FAR *put;     /* next output */
+    unsigned have, left;        /* available input and output */
+    unsigned long hold;         /* bit buffer */
+    unsigned bits;              /* bits in bit buffer */
+    unsigned copy;              /* number of stored or match bytes to copy */
+    unsigned char FAR *from;    /* where to copy match bytes from */
+    code this;                  /* current decoding table entry */
+    code last;                  /* parent table entry */
+    unsigned len;               /* length to copy for repeats, bits to drop */
+    int ret;                    /* return code */
+    static const unsigned short order[19] = /* permutation of code lengths */
+        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+    /* Check that the strm exists and that the state was initialized */
+    if (strm == Z_NULL || strm->state == Z_NULL)
+        return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* Reset the state */
+    strm->msg = Z_NULL;
+    state->mode = TYPE;
+    state->last = 0;
+    state->whave = 0;
+    next = strm->next_in;
+    have = next != Z_NULL ? strm->avail_in : 0;
+    hold = 0;
+    bits = 0;
+    put = state->window;
+    left = state->wsize;
+
+    /* Inflate until end of block marked as last */
+    for (;;)
+        switch (state->mode) {
+        case TYPE:
+            /* determine and dispatch block type */
+            if (state->last) {
+                BYTEBITS();
+                state->mode = DONE;
+                break;
+            }
+            NEEDBITS(3);
+            state->last = BITS(1);
+            DROPBITS(1);
+            switch (BITS(2)) {
+            case 0:                             /* stored block */
+                Tracev((stderr, "inflate:     stored block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = STORED;
+                break;
+            case 1:                             /* fixed block */
+                fixedtables(state);
+                Tracev((stderr, "inflate:     fixed codes block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = LEN;              /* decode codes */
+                break;
+            case 2:                             /* dynamic block */
+                Tracev((stderr, "inflate:     dynamic codes block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = TABLE;
+                break;
+            case 3:
+                strm->msg = (char *)"invalid block type";
+                state->mode = BAD;
+            }
+            DROPBITS(2);
+            break;
+
+        case STORED:
+            /* get and verify stored block length */
+            BYTEBITS();                         /* go to byte boundary */
+            NEEDBITS(32);
+            if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+                strm->msg = (char *)"invalid stored block lengths";
+                state->mode = BAD;
+                break;
+            }
+            state->length = (unsigned)hold & 0xffff;
+            Tracev((stderr, "inflate:       stored length %u\n",
+                    state->length));
+            INITBITS();
+
+            /* copy stored block from input to output */
+            while (state->length != 0) {
+                copy = state->length;
+                PULL();
+                ROOM();
+                if (copy > have) copy = have;
+                if (copy > left) copy = left;
+                zmemcpy(put, next, copy);
+                have -= copy;
+                next += copy;
+                left -= copy;
+                put += copy;
+                state->length -= copy;
+            }
+            Tracev((stderr, "inflate:       stored end\n"));
+            state->mode = TYPE;
+            break;
+
+        case TABLE:
+            /* get dynamic table entries descriptor */
+            NEEDBITS(14);
+            state->nlen = BITS(5) + 257;
+            DROPBITS(5);
+            state->ndist = BITS(5) + 1;
+            DROPBITS(5);
+            state->ncode = BITS(4) + 4;
+            DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+            if (state->nlen > 286 || state->ndist > 30) {
+                strm->msg = (char *)"too many length or distance symbols";
+                state->mode = BAD;
+                break;
+            }
+#endif
+            Tracev((stderr, "inflate:       table sizes ok\n"));
+
+            /* get code length code lengths (not a typo) */
+            state->have = 0;
+            while (state->have < state->ncode) {
+                NEEDBITS(3);
+                state->lens[order[state->have++]] = (unsigned short)BITS(3);
+                DROPBITS(3);
+            }
+            while (state->have < 19)
+                state->lens[order[state->have++]] = 0;
+            state->next = state->codes;
+            state->lencode = (code const FAR *)(state->next);
+            state->lenbits = 7;
+            ret = inflate_table(CODES, state->lens, 19, &(state->next),
+                                &(state->lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid code lengths set";
+                state->mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       code lengths ok\n"));
+
+            /* get length and distance code code lengths */
+            state->have = 0;
+            while (state->have < state->nlen + state->ndist) {
+                for (;;) {
+                    this = state->lencode[BITS(state->lenbits)];
+                    if ((unsigned)(this.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                if (this.val < 16) {
+                    NEEDBITS(this.bits);
+                    DROPBITS(this.bits);
+                    state->lens[state->have++] = this.val;
+                }
+                else {
+                    if (this.val == 16) {
+                        NEEDBITS(this.bits + 2);
+                        DROPBITS(this.bits);
+                        if (state->have == 0) {
+                            strm->msg = (char *)"invalid bit length repeat";
+                            state->mode = BAD;
+                            break;
+                        }
+                        len = (unsigned)(state->lens[state->have - 1]);
+                        copy = 3 + BITS(2);
+                        DROPBITS(2);
+                    }
+                    else if (this.val == 17) {
+                        NEEDBITS(this.bits + 3);
+                        DROPBITS(this.bits);
+                        len = 0;
+                        copy = 3 + BITS(3);
+                        DROPBITS(3);
+                    }
+                    else {
+                        NEEDBITS(this.bits + 7);
+                        DROPBITS(this.bits);
+                        len = 0;
+                        copy = 11 + BITS(7);
+                        DROPBITS(7);
+                    }
+                    if (state->have + copy > state->nlen + state->ndist) {
+                        strm->msg = (char *)"invalid bit length repeat";
+                        state->mode = BAD;
+                        break;
+                    }
+                    while (copy--)
+                        state->lens[state->have++] = (unsigned short)len;
+                }
+            }
+
+            /* handle error breaks in while */
+            if (state->mode == BAD) break;
+
+            /* build code tables */
+            state->next = state->codes;
+            state->lencode = (code const FAR *)(state->next);
+            state->lenbits = 9;
+            ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
+                                &(state->lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid literal/lengths set";
+                state->mode = BAD;
+                break;
+            }
+            state->distcode = (code const FAR *)(state->next);
+            state->distbits = 6;
+            ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+                            &(state->next), &(state->distbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid distances set";
+                state->mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       codes ok\n"));
+            state->mode = LEN;
+
+        case LEN:
+            /* use inflate_fast() if we have enough input and output */
+            if (have >= 6 && left >= 258) {
+                RESTORE();
+                if (state->whave < state->wsize)
+                    state->whave = state->wsize - left;
+                inflate_fast(strm, state->wsize);
+                LOAD();
+                break;
+            }
+
+            /* get a literal, length, or end-of-block code */
+            for (;;) {
+                this = state->lencode[BITS(state->lenbits)];
+                if ((unsigned)(this.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if (this.op && (this.op & 0xf0) == 0) {
+                last = this;
+                for (;;) {
+                    this = state->lencode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + this.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+            }
+            DROPBITS(this.bits);
+            state->length = (unsigned)this.val;
+
+            /* process literal */
+            if (this.op == 0) {
+                Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ?
+                        "inflate:         literal '%c'\n" :
+                        "inflate:         literal 0x%02x\n", this.val));
+                ROOM();
+                *put++ = (unsigned char)(state->length);
+                left--;
+                state->mode = LEN;
+                break;
+            }
+
+            /* process end of block */
+            if (this.op & 32) {
+                Tracevv((stderr, "inflate:         end of block\n"));
+                state->mode = TYPE;
+                break;
+            }
+
+            /* invalid code */
+            if (this.op & 64) {
+                strm->msg = (char *)"invalid literal/length code";
+                state->mode = BAD;
+                break;
+            }
+
+            /* length code -- get extra bits, if any */
+            state->extra = (unsigned)(this.op) & 15;
+            if (state->extra != 0) {
+                NEEDBITS(state->extra);
+                state->length += BITS(state->extra);
+                DROPBITS(state->extra);
+            }
+            Tracevv((stderr, "inflate:         length %u\n", state->length));
+
+            /* get distance code */
+            for (;;) {
+                this = state->distcode[BITS(state->distbits)];
+                if ((unsigned)(this.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if ((this.op & 0xf0) == 0) {
+                last = this;
+                for (;;) {
+                    this = state->distcode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + this.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+            }
+            DROPBITS(this.bits);
+            if (this.op & 64) {
+                strm->msg = (char *)"invalid distance code";
+                state->mode = BAD;
+                break;
+            }
+            state->offset = (unsigned)this.val;
+
+            /* get distance extra bits, if any */
+            state->extra = (unsigned)(this.op) & 15;
+            if (state->extra != 0) {
+                NEEDBITS(state->extra);
+                state->offset += BITS(state->extra);
+                DROPBITS(state->extra);
+            }
+            if (state->offset > state->wsize - (state->whave < state->wsize ?
+                                                left : 0)) {
+                strm->msg = (char *)"invalid distance too far back";
+                state->mode = BAD;
+                break;
+            }
+            Tracevv((stderr, "inflate:         distance %u\n", state->offset));
+
+            /* copy match from window to output */
+            do {
+                ROOM();
+                copy = state->wsize - state->offset;
+                if (copy < left) {
+                    from = put + copy;
+                    copy = left - copy;
+                }
+                else {
+                    from = put - state->offset;
+                    copy = left;
+                }
+                if (copy > state->length) copy = state->length;
+                state->length -= copy;
+                left -= copy;
+                do {
+                    *put++ = *from++;
+                } while (--copy);
+            } while (state->length != 0);
+            break;
+
+        case DONE:
+            /* inflate stream terminated properly -- write leftover output */
+            ret = Z_STREAM_END;
+            if (left < state->wsize) {
+                if (out(out_desc, state->window, state->wsize - left))
+                    ret = Z_BUF_ERROR;
+            }
+            goto inf_leave;
+
+        case BAD:
+            ret = Z_DATA_ERROR;
+            goto inf_leave;
+
+        default:                /* can't happen, but makes compilers happy */
+            ret = Z_STREAM_ERROR;
+            goto inf_leave;
+        }
+
+    /* Return unused input */
+  inf_leave:
+    strm->next_in = next;
+    strm->avail_in = have;
+    return ret;
+}
+
+int ZEXPORT inflateBackEnd(strm)
+z_streamp strm;
+{
+    if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
+        return Z_STREAM_ERROR;
+    ZFREE(strm, strm->state);
+    strm->state = Z_NULL;
+    Tracev((stderr, "inflate: end\n"));
+    return Z_OK;
+}

deps/zlib/inffast.c

@@ -0,0 +1,318 @@
+/* inffast.c -- fast decoding
+ * Copyright (C) 1995-2004 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifndef ASMINF
+
+/* Allow machine dependent optimization for post-increment or pre-increment.
+   Based on testing to date,
+   Pre-increment preferred for:
+   - PowerPC G3 (Adler)
+   - MIPS R5000 (Randers-Pehrson)
+   Post-increment preferred for:
+   - none
+   No measurable difference:
+   - Pentium III (Anderson)
+   - M68060 (Nikl)
+ */
+#ifdef POSTINC
+#  define OFF 0
+#  define PUP(a) *(a)++
+#else
+#  define OFF 1
+#  define PUP(a) *++(a)
+#endif
+
+/*
+   Decode literal, length, and distance codes and write out the resulting
+   literal and match bytes until either not enough input or output is
+   available, an end-of-block is encountered, or a data error is encountered.
+   When large enough input and output buffers are supplied to inflate(), for
+   example, a 16K input buffer and a 64K output buffer, more than 95% of the
+   inflate execution time is spent in this routine.
+
+   Entry assumptions:
+
+        state->mode == LEN
+        strm->avail_in >= 6
+        strm->avail_out >= 258
+        start >= strm->avail_out
+        state->bits < 8
+
+   On return, state->mode is one of:
+
+        LEN -- ran out of enough output space or enough available input
+        TYPE -- reached end of block code, inflate() to interpret next block
+        BAD -- error in block data
+
+   Notes:
+
+    - The maximum input bits used by a length/distance pair is 15 bits for the
+      length code, 5 bits for the length extra, 15 bits for the distance code,
+      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
+      Therefore if strm->avail_in >= 6, then there is enough input to avoid
+      checking for available input while decoding.
+
+    - The maximum bytes that a single length/distance pair can output is 258
+      bytes, which is the maximum length that can be coded.  inflate_fast()
+      requires strm->avail_out >= 258 for each loop to avoid checking for
+      output space.
+ */
+void inflate_fast(strm, start)
+z_streamp strm;
+unsigned start;         /* inflate()'s starting value for strm->avail_out */
+{
+    struct inflate_state FAR *state;
+    unsigned char FAR *in;      /* local strm->next_in */
+    unsigned char FAR *last;    /* while in < last, enough input available */
+    unsigned char FAR *out;     /* local strm->next_out */
+    unsigned char FAR *beg;     /* inflate()'s initial strm->next_out */
+    unsigned char FAR *end;     /* while out < end, enough space available */
+#ifdef INFLATE_STRICT
+    unsigned dmax;              /* maximum distance from zlib header */
+#endif
+    unsigned wsize;             /* window size or zero if not using window */
+    unsigned whave;             /* valid bytes in the window */
+    unsigned write;             /* window write index */
+    unsigned char FAR *window;  /* allocated sliding window, if wsize != 0 */
+    unsigned long hold;         /* local strm->hold */
+    unsigned bits;              /* local strm->bits */
+    code const FAR *lcode;      /* local strm->lencode */
+    code const FAR *dcode;      /* local strm->distcode */
+    unsigned lmask;             /* mask for first level of length codes */
+    unsigned dmask;             /* mask for first level of distance codes */
+    code this;                  /* retrieved table entry */
+    unsigned op;                /* code bits, operation, extra bits, or */
+                                /*  window position, window bytes to copy */
+    unsigned len;               /* match length, unused bytes */
+    unsigned dist;              /* match distance */
+    unsigned char FAR *from;    /* where to copy match from */
+
+    /* copy state to local variables */
+    state = (struct inflate_state FAR *)strm->state;
+    in = strm->next_in - OFF;
+    last = in + (strm->avail_in - 5);
+    out = strm->next_out - OFF;
+    beg = out - (start - strm->avail_out);
+    end = out + (strm->avail_out - 257);
+#ifdef INFLATE_STRICT
+    dmax = state->dmax;
+#endif
+    wsize = state->wsize;
+    whave = state->whave;
+    write = state->write;
+    window = state->window;
+    hold = state->hold;
+    bits = state->bits;
+    lcode = state->lencode;
+    dcode = state->distcode;
+    lmask = (1U << state->lenbits) - 1;
+    dmask = (1U << state->distbits) - 1;
+
+    /* decode literals and length/distances until end-of-block or not enough
+       input data or output space */
+    do {
+        if (bits < 15) {
+            hold += (unsigned long)(PUP(in)) << bits;
+            bits += 8;
+            hold += (unsigned long)(PUP(in)) << bits;
+            bits += 8;
+        }
+        this = lcode[hold & lmask];
+      dolen:
+        op = (unsigned)(this.bits);
+        hold >>= op;
+        bits -= op;
+        op = (unsigned)(this.op);
+        if (op == 0) {                          /* literal */
+            Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ?
+                    "inflate:         literal '%c'\n" :
+                    "inflate:         literal 0x%02x\n", this.val));
+            PUP(out) = (unsigned char)(this.val);
+        }
+        else if (op & 16) {                     /* length base */
+            len = (unsigned)(this.val);
+            op &= 15;                           /* number of extra bits */
+            if (op) {
+                if (bits < op) {
+                    hold += (unsigned long)(PUP(in)) << bits;
+                    bits += 8;
+                }
+                len += (unsigned)hold & ((1U << op) - 1);
+                hold >>= op;
+                bits -= op;
+            }
+            Tracevv((stderr, "inflate:         length %u\n", len));
+            if (bits < 15) {
+                hold += (unsigned long)(PUP(in)) << bits;
+                bits += 8;
+                hold += (unsigned long)(PUP(in)) << bits;
+                bits += 8;
+            }
+            this = dcode[hold & dmask];
+          dodist:
+            op = (unsigned)(this.bits);
+            hold >>= op;
+            bits -= op;
+            op = (unsigned)(this.op);
+            if (op & 16) {                      /* distance base */
+                dist = (unsigned)(this.val);
+                op &= 15;                       /* number of extra bits */
+                if (bits < op) {
+                    hold += (unsigned long)(PUP(in)) << bits;
+                    bits += 8;
+                    if (bits < op) {
+                        hold += (unsigned long)(PUP(in)) << bits;
+                        bits += 8;
+                    }
+                }
+                dist += (unsigned)hold & ((1U << op) - 1);
+#ifdef INFLATE_STRICT
+                if (dist > dmax) {
+                    strm->msg = (char *)"invalid distance too far back";
+                    state->mode = BAD;
+                    break;
+                }
+#endif
+                hold >>= op;
+                bits -= op;
+                Tracevv((stderr, "inflate:         distance %u\n", dist));
+                op = (unsigned)(out - beg);     /* max distance in output */
+                if (dist > op) {                /* see if copy from window */
+                    op = dist - op;             /* distance back in window */
+                    if (op > whave) {
+                        strm->msg = (char *)"invalid distance too far back";
+                        state->mode = BAD;
+                        break;
+                    }
+                    from = window - OFF;
+                    if (write == 0) {           /* very common case */
+                        from += wsize - op;
+                        if (op < len) {         /* some from window */
+                            len -= op;
+                            do {
+                                PUP(out) = PUP(from);
+                            } while (--op);
+                            from = out - dist;  /* rest from output */
+                        }
+                    }
+                    else if (write < op) {      /* wrap around window */
+                        from += wsize + write - op;
+                        op -= write;
+                        if (op < len) {         /* some from end of window */
+                            len -= op;
+                            do {
+                                PUP(out) = PUP(from);
+                            } while (--op);
+                            from = window - OFF;
+                            if (write < len) {  /* some from start of window */
+                                op = write;
+                                len -= op;
+                                do {
+                                    PUP(out) = PUP(from);
+                                } while (--op);
+                                from = out - dist;      /* rest from output */
+                            }
+                        }
+                    }
+                    else {                      /* contiguous in window */
+                        from += write - op;
+                        if (op < len) {         /* some from window */
+                            len -= op;
+                            do {
+                                PUP(out) = PUP(from);
+                            } while (--op);
+                            from = out - dist;  /* rest from output */
+                        }
+                    }
+                    while (len > 2) {
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        len -= 3;
+                    }
+                    if (len) {
+                        PUP(out) = PUP(from);
+                        if (len > 1)
+                            PUP(out) = PUP(from);
+                    }
+                }
+                else {
+                    from = out - dist;          /* copy direct from output */
+                    do {                        /* minimum length is three */
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        len -= 3;
+                    } while (len > 2);
+                    if (len) {
+                        PUP(out) = PUP(from);
+                        if (len > 1)
+                            PUP(out) = PUP(from);
+                    }
+                }
+            }
+            else if ((op & 64) == 0) {          /* 2nd level distance code */
+                this = dcode[this.val + (hold & ((1U << op) - 1))];
+                goto dodist;
+            }
+            else {
+                strm->msg = (char *)"invalid distance code";
+                state->mode = BAD;
+                break;
+            }
+        }
+        else if ((op & 64) == 0) {              /* 2nd level length code */
+            this = lcode[this.val + (hold & ((1U << op) - 1))];
+            goto dolen;
+        }
+        else if (op & 32) {                     /* end-of-block */
+            Tracevv((stderr, "inflate:         end of block\n"));
+            state->mode = TYPE;
+            break;
+        }
+        else {
+            strm->msg = (char *)"invalid literal/length code";
+            state->mode = BAD;
+            break;
+        }
+    } while (in < last && out < end);
+
+    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+    len = bits >> 3;
+    in -= len;
+    bits -= len << 3;
+    hold &= (1U << bits) - 1;
+
+    /* update state and return */
+    strm->next_in = in + OFF;
+    strm->next_out = out + OFF;
+    strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
+    strm->avail_out = (unsigned)(out < end ?
+                                 257 + (end - out) : 257 - (out - end));
+    state->hold = hold;
+    state->bits = bits;
+    return;
+}
+
+/*
+   inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
+   - Using bit fields for code structure
+   - Different op definition to avoid & for extra bits (do & for table bits)
+   - Three separate decoding do-loops for direct, window, and write == 0
+   - Special case for distance > 1 copies to do overlapped load and store copy
+   - Explicit branch predictions (based on measured branch probabilities)
+   - Deferring match copy and interspersed it with decoding subsequent codes
+   - Swapping literal/length else
+   - Swapping window/direct else
+   - Larger unrolled copy loops (three is about right)
+   - Moving len -= 3 statement into middle of loop
+ */
+
+#endif /* !ASMINF */

deps/zlib/inffast.h

@@ -0,0 +1,11 @@
+/* inffast.h -- header to use inffast.c
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+void inflate_fast OF((z_streamp strm, unsigned start));

deps/zlib/inffixed.h

@@ -0,0 +1,94 @@
+    /* inffixed.h -- table for decoding fixed codes
+     * Generated automatically by makefixed().
+     */
+
+    /* WARNING: this file should *not* be used by applications. It
+       is part of the implementation of the compression library and
+       is subject to change. Applications should only use zlib.h.
+     */
+
+    static const code lenfix[512] = {
+        {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48},
+        {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128},
+        {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59},
+        {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176},
+        {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20},
+        {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100},
+        {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8},
+        {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216},
+        {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76},
+        {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114},
+        {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},
+        {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148},
+        {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42},
+        {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86},
+        {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15},
+        {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236},
+        {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62},
+        {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
+        {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31},
+        {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162},
+        {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25},
+        {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105},
+        {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4},
+        {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202},
+        {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69},
+        {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125},
+        {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13},
+        {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195},
+        {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35},
+        {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91},
+        {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19},
+        {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246},
+        {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55},
+        {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135},
+        {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99},
+        {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190},
+        {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16},
+        {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96},
+        {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6},
+        {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209},
+        {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},
+        {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116},
+        {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4},
+        {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153},
+        {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44},
+        {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82},
+        {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11},
+        {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
+        {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58},
+        {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138},
+        {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51},
+        {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173},
+        {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30},
+        {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110},
+        {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0},
+        {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195},
+        {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65},
+        {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121},
+        {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},
+        {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258},
+        {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37},
+        {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93},
+        {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23},
+        {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251},
+        {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51},
+        {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
+        {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67},
+        {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183},
+        {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23},
+        {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103},
+        {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9},
+        {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223},
+        {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79},
+        {0,9,255}
+    };
+
+    static const code distfix[32] = {
+        {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025},
+        {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193},
+        {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385},
+        {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577},
+        {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073},
+        {22,5,193},{64,5,0}
+    };

deps/zlib/inflate.h

@@ -0,0 +1,115 @@
+/* inflate.h -- internal inflate state definition
+ * Copyright (C) 1995-2004 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* define NO_GZIP when compiling if you want to disable gzip header and
+   trailer decoding by inflate().  NO_GZIP would be used to avoid linking in
+   the crc code when it is not needed.  For shared libraries, gzip decoding
+   should be left enabled. */
+#ifndef NO_GZIP
+#  define GUNZIP
+#endif
+
+/* Possible inflate modes between inflate() calls */
+typedef enum {
+    HEAD,       /* i: waiting for magic header */
+    FLAGS,      /* i: waiting for method and flags (gzip) */
+    TIME,       /* i: waiting for modification time (gzip) */
+    OS,         /* i: waiting for extra flags and operating system (gzip) */
+    EXLEN,      /* i: waiting for extra length (gzip) */
+    EXTRA,      /* i: waiting for extra bytes (gzip) */
+    NAME,       /* i: waiting for end of file name (gzip) */
+    COMMENT,    /* i: waiting for end of comment (gzip) */
+    HCRC,       /* i: waiting for header crc (gzip) */
+    DICTID,     /* i: waiting for dictionary check value */
+    DICT,       /* waiting for inflateSetDictionary() call */
+        TYPE,       /* i: waiting for type bits, including last-flag bit */
+        TYPEDO,     /* i: same, but skip check to exit inflate on new block */
+        STORED,     /* i: waiting for stored size (length and complement) */
+        COPY,       /* i/o: waiting for input or output to copy stored block */
+        TABLE,      /* i: waiting for dynamic block table lengths */
+        LENLENS,    /* i: waiting for code length code lengths */
+        CODELENS,   /* i: waiting for length/lit and distance code lengths */
+            LEN,        /* i: waiting for length/lit code */
+            LENEXT,     /* i: waiting for length extra bits */
+            DIST,       /* i: waiting for distance code */
+            DISTEXT,    /* i: waiting for distance extra bits */
+            MATCH,      /* o: waiting for output space to copy string */
+            LIT,        /* o: waiting for output space to write literal */
+    CHECK,      /* i: waiting for 32-bit check value */
+    LENGTH,     /* i: waiting for 32-bit length (gzip) */
+    DONE,       /* finished check, done -- remain here until reset */
+    BAD,        /* got a data error -- remain here until reset */
+    MEM,        /* got an inflate() memory error -- remain here until reset */
+    SYNC        /* looking for synchronization bytes to restart inflate() */
+} inflate_mode;
+
+/*
+    State transitions between above modes -
+
+    (most modes can go to the BAD or MEM mode -- not shown for clarity)
+
+    Process header:
+        HEAD -> (gzip) or (zlib)
+        (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME
+        NAME -> COMMENT -> HCRC -> TYPE
+        (zlib) -> DICTID or TYPE
+        DICTID -> DICT -> TYPE
+    Read deflate blocks:
+            TYPE -> STORED or TABLE or LEN or CHECK
+            STORED -> COPY -> TYPE
+            TABLE -> LENLENS -> CODELENS -> LEN
+    Read deflate codes:
+                LEN -> LENEXT or LIT or TYPE
+                LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
+                LIT -> LEN
+    Process trailer:
+        CHECK -> LENGTH -> DONE
+ */
+
+/* state maintained between inflate() calls.  Approximately 7K bytes. */
+struct inflate_state {
+    inflate_mode mode;          /* current inflate mode */
+    int last;                   /* true if processing last block */
+    int wrap;                   /* bit 0 true for zlib, bit 1 true for gzip */
+    int havedict;               /* true if dictionary provided */
+    int flags;                  /* gzip header method and flags (0 if zlib) */
+    unsigned dmax;              /* zlib header max distance (INFLATE_STRICT) */
+    unsigned long check;        /* protected copy of check value */
+    unsigned long total;        /* protected copy of output count */
+    gz_headerp head;            /* where to save gzip header information */
+        /* sliding window */
+    unsigned wbits;             /* log base 2 of requested window size */
+    unsigned wsize;             /* window size or zero if not using window */
+    unsigned whave;             /* valid bytes in the window */
+    unsigned write;             /* window write index */
+    unsigned char FAR *window;  /* allocated sliding window, if needed */
+        /* bit accumulator */
+    unsigned long hold;         /* input bit accumulator */
+    unsigned bits;              /* number of bits in "in" */
+        /* for string and stored block copying */
+    unsigned length;            /* literal or length of data to copy */
+    unsigned offset;            /* distance back to copy string from */
+        /* for table and code decoding */
+    unsigned extra;             /* extra bits needed */
+        /* fixed and dynamic code tables */
+    code const FAR *lencode;    /* starting table for length/literal codes */
+    code const FAR *distcode;   /* starting table for distance codes */
+    unsigned lenbits;           /* index bits for lencode */
+    unsigned distbits;          /* index bits for distcode */
+        /* dynamic table building */
+    unsigned ncode;             /* number of code length code lengths */
+    unsigned nlen;              /* number of length code lengths */
+    unsigned ndist;             /* number of distance code lengths */
+    unsigned have;              /* number of code lengths in lens[] */
+    code FAR *next;             /* next available space in codes[] */
+    unsigned short lens[320];   /* temporary storage for code lengths */
+    unsigned short work[288];   /* work area for code table building */
+    code codes[ENOUGH];         /* space for code tables */
+};

deps/zlib/inftrees.c

@@ -0,0 +1,329 @@
+/* inftrees.c -- generate Huffman trees for efficient decoding
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+
+#define MAXBITS 15
+
+const char inflate_copyright[] =
+   " inflate 1.2.3 Copyright 1995-2005 Mark Adler ";
+/*
+  If you use the zlib library in a product, an acknowledgment is welcome
+  in the documentation of your product. If for some reason you cannot
+  include such an acknowledgment, I would appreciate that you keep this
+  copyright string in the executable of your product.
+ */
+
+/*
+   Build a set of tables to decode the provided canonical Huffman code.
+   The code lengths are lens[0..codes-1].  The result starts at *table,
+   whose indices are 0..2^bits-1.  work is a writable array of at least
+   lens shorts, which is used as a work area.  type is the type of code
+   to be generated, CODES, LENS, or DISTS.  On return, zero is success,
+   -1 is an invalid code, and +1 means that ENOUGH isn't enough.  table
+   on return points to the next available entry's address.  bits is the
+   requested root table index bits, and on return it is the actual root
+   table index bits.  It will differ if the request is greater than the
+   longest code or if it is less than the shortest code.
+ */
+int inflate_table(type, lens, codes, table, bits, work)
+codetype type;
+unsigned short FAR *lens;
+unsigned codes;
+code FAR * FAR *table;
+unsigned FAR *bits;
+unsigned short FAR *work;
+{
+    unsigned len;               /* a code's length in bits */
+    unsigned sym;               /* index of code symbols */
+    unsigned min, max;          /* minimum and maximum code lengths */
+    unsigned root;              /* number of index bits for root table */
+    unsigned curr;              /* number of index bits for current table */
+    unsigned drop;              /* code bits to drop for sub-table */
+    int left;                   /* number of prefix codes available */
+    unsigned used;              /* code entries in table used */
+    unsigned huff;              /* Huffman code */
+    unsigned incr;              /* for incrementing code, index */
+    unsigned fill;              /* index for replicating entries */
+    unsigned low;               /* low bits for current root entry */
+    unsigned mask;              /* mask for low root bits */
+    code this;                  /* table entry for duplication */
+    code FAR *next;             /* next available space in table */
+    const unsigned short FAR *base;     /* base value table to use */
+    const unsigned short FAR *extra;    /* extra bits table to use */
+    int end;                    /* use base and extra for symbol > end */
+    unsigned short count[MAXBITS+1];    /* number of codes of each length */
+    unsigned short offs[MAXBITS+1];     /* offsets in table for each length */
+    static const unsigned short lbase[31] = { /* Length codes 257..285 base */
+        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
+    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
+        16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196};
+    static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
+        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+        8193, 12289, 16385, 24577, 0, 0};
+    static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
+        16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
+        23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
+        28, 28, 29, 29, 64, 64};
+
+    /*
+       Process a set of code lengths to create a canonical Huffman code.  The
+       code lengths are lens[0..codes-1].  Each length corresponds to the
+       symbols 0..codes-1.  The Huffman code is generated by first sorting the
+       symbols by length from short to long, and retaining the symbol order
+       for codes with equal lengths.  Then the code starts with all zero bits
+       for the first code of the shortest length, and the codes are integer
+       increments for the same length, and zeros are appended as the length
+       increases.  For the deflate format, these bits are stored backwards
+       from their more natural integer increment ordering, and so when the
+       decoding tables are built in the large loop below, the integer codes
+       are incremented backwards.
+
+       This routine assumes, but does not check, that all of the entries in
+       lens[] are in the range 0..MAXBITS.  The caller must assure this.
+       1..MAXBITS is interpreted as that code length.  zero means that that
+       symbol does not occur in this code.
+
+       The codes are sorted by computing a count of codes for each length,
+       creating from that a table of starting indices for each length in the
+       sorted table, and then entering the symbols in order in the sorted
+       table.  The sorted table is work[], with that space being provided by
+       the caller.
+
+       The length counts are used for other purposes as well, i.e. finding
+       the minimum and maximum length codes, determining if there are any
+       codes at all, checking for a valid set of lengths, and looking ahead
+       at length counts to determine sub-table sizes when building the
+       decoding tables.
+     */
+
+    /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+    for (len = 0; len <= MAXBITS; len++)
+        count[len] = 0;
+    for (sym = 0; sym < codes; sym++)
+        count[lens[sym]]++;
+
+    /* bound code lengths, force root to be within code lengths */
+    root = *bits;
+    for (max = MAXBITS; max >= 1; max--)
+        if (count[max] != 0) break;
+    if (root > max) root = max;
+    if (max == 0) {                     /* no symbols to code at all */
+        this.op = (unsigned char)64;    /* invalid code marker */
+        this.bits = (unsigned char)1;
+        this.val = (unsigned short)0;
+        *(*table)++ = this;             /* make a table to force an error */
+        *(*table)++ = this;
+        *bits = 1;
+        return 0;     /* no symbols, but wait for decoding to report error */
+    }
+    for (min = 1; min <= MAXBITS; min++)
+        if (count[min] != 0) break;
+    if (root < min) root = min;
+
+    /* check for an over-subscribed or incomplete set of lengths */
+    left = 1;
+    for (len = 1; len <= MAXBITS; len++) {
+        left <<= 1;
+        left -= count[len];
+        if (left < 0) return -1;        /* over-subscribed */
+    }
+    if (left > 0 && (type == CODES || max != 1))
+        return -1;                      /* incomplete set */
+
+    /* generate offsets into symbol table for each length for sorting */
+    offs[1] = 0;
+    for (len = 1; len < MAXBITS; len++)
+        offs[len + 1] = offs[len] + count[len];
+
+    /* sort symbols by length, by symbol order within each length */
+    for (sym = 0; sym < codes; sym++)
+        if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
+
+    /*
+       Create and fill in decoding tables.  In this loop, the table being
+       filled is at next and has curr index bits.  The code being used is huff
+       with length len.  That code is converted to an index by dropping drop
+       bits off of the bottom.  For codes where len is less than drop + curr,
+       those top drop + curr - len bits are incremented through all values to
+       fill the table with replicated entries.
+
+       root is the number of index bits for the root table.  When len exceeds
+       root, sub-tables are created pointed to by the root entry with an index
+       of the low root bits of huff.  This is saved in low to check for when a
+       new sub-table should be started.  drop is zero when the root table is
+       being filled, and drop is root when sub-tables are being filled.
+
+       When a new sub-table is needed, it is necessary to look ahead in the
+       code lengths to determine what size sub-table is needed.  The length
+       counts are used for this, and so count[] is decremented as codes are
+       entered in the tables.
+
+       used keeps track of how many table entries have been allocated from the
+       provided *table space.  It is checked when a LENS table is being made
+       against the space in *table, ENOUGH, minus the maximum space needed by
+       the worst case distance code, MAXD.  This should never happen, but the
+       sufficiency of ENOUGH has not been proven exhaustively, hence the check.
+       This assumes that when type == LENS, bits == 9.
+
+       sym increments through all symbols, and the loop terminates when
+       all codes of length max, i.e. all codes, have been processed.  This
+       routine permits incomplete codes, so another loop after this one fills
+       in the rest of the decoding tables with invalid code markers.
+     */
+
+    /* set up for code type */
+    switch (type) {
+    case CODES:
+        base = extra = work;    /* dummy value--not used */
+        end = 19;
+        break;
+    case LENS:
+        base = lbase;
+        base -= 257;
+        extra = lext;
+        extra -= 257;
+        end = 256;
+        break;
+    default:            /* DISTS */
+        base = dbase;
+        extra = dext;
+        end = -1;
+    }
+
+    /* initialize state for loop */
+    huff = 0;                   /* starting code */
+    sym = 0;                    /* starting code symbol */
+    len = min;                  /* starting code length */
+    next = *table;              /* current table to fill in */
+    curr = root;                /* current table index bits */
+    drop = 0;                   /* current bits to drop from code for index */
+    low = (unsigned)(-1);       /* trigger new sub-table when len > root */
+    used = 1U << root;          /* use root table entries */
+    mask = used - 1;            /* mask for comparing low */
+
+    /* check available table space */
+    if (type == LENS && used >= ENOUGH - MAXD)
+        return 1;
+
+    /* process all codes and make table entries */
+    for (;;) {
+        /* create table entry */
+        this.bits = (unsigned char)(len - drop);
+        if ((int)(work[sym]) < end) {
+            this.op = (unsigned char)0;
+            this.val = work[sym];
+        }
+        else if ((int)(work[sym]) > end) {
+            this.op = (unsigned char)(extra[work[sym]]);
+            this.val = base[work[sym]];
+        }
+        else {
+            this.op = (unsigned char)(32 + 64);         /* end of block */
+            this.val = 0;
+        }
+
+        /* replicate for those indices with low len bits equal to huff */
+        incr = 1U << (len - drop);
+        fill = 1U << curr;
+        min = fill;                 /* save offset to next table */
+        do {
+            fill -= incr;
+            next[(huff >> drop) + fill] = this;
+        } while (fill != 0);
+
+        /* backwards increment the len-bit code huff */
+        incr = 1U << (len - 1);
+        while (huff & incr)
+            incr >>= 1;
+        if (incr != 0) {
+            huff &= incr - 1;
+            huff += incr;
+        }
+        else
+            huff = 0;
+
+        /* go to next symbol, update count, len */
+        sym++;
+        if (--(count[len]) == 0) {
+            if (len == max) break;
+            len = lens[work[sym]];
+        }
+
+        /* create new sub-table if needed */
+        if (len > root && (huff & mask) != low) {
+            /* if first time, transition to sub-tables */
+            if (drop == 0)
+                drop = root;
+
+            /* increment past last table */
+            next += min;            /* here min is 1 << curr */
+
+            /* determine length of next table */
+            curr = len - drop;
+            left = (int)(1 << curr);
+            while (curr + drop < max) {
+                left -= count[curr + drop];
+                if (left <= 0) break;
+                curr++;
+                left <<= 1;
+            }
+
+            /* check for enough space */
+            used += 1U << curr;
+            if (type == LENS && used >= ENOUGH - MAXD)
+                return 1;
+
+            /* point entry in root table to sub-table */
+            low = huff & mask;
+            (*table)[low].op = (unsigned char)curr;
+            (*table)[low].bits = (unsigned char)root;
+            (*table)[low].val = (unsigned short)(next - *table);
+        }
+    }
+
+    /*
+       Fill in rest of table for incomplete codes.  This loop is similar to the
+       loop above in incrementing huff for table indices.  It is assumed that
+       len is equal to curr + drop, so there is no loop needed to increment
+       through high index bits.  When the current sub-table is filled, the loop
+       drops back to the root table to fill in any remaining entries there.
+     */
+    this.op = (unsigned char)64;                /* invalid code marker */
+    this.bits = (unsigned char)(len - drop);
+    this.val = (unsigned short)0;
+    while (huff != 0) {
+        /* when done with sub-table, drop back to root table */
+        if (drop != 0 && (huff & mask) != low) {
+            drop = 0;
+            len = root;
+            next = *table;
+            this.bits = (unsigned char)len;
+        }
+
+        /* put invalid code marker in table */
+        next[huff >> drop] = this;
+
+        /* backwards increment the len-bit code huff */
+        incr = 1U << (len - 1);
+        while (huff & incr)
+            incr >>= 1;
+        if (incr != 0) {
+            huff &= incr - 1;
+            huff += incr;
+        }
+        else
+            huff = 0;
+    }
+
+    /* set return parameters */
+    *table += used;
+    *bits = root;
+    return 0;
+}

deps/zlib/inftrees.h

@@ -0,0 +1,55 @@
+/* inftrees.h -- header to use inftrees.c
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* Structure for decoding tables.  Each entry provides either the
+   information needed to do the operation requested by the code that
+   indexed that table entry, or it provides a pointer to another
+   table that indexes more bits of the code.  op indicates whether
+   the entry is a pointer to another table, a literal, a length or
+   distance, an end-of-block, or an invalid code.  For a table
+   pointer, the low four bits of op is the number of index bits of
+   that table.  For a length or distance, the low four bits of op
+   is the number of extra bits to get after the code.  bits is
+   the number of bits in this code or part of the code to drop off
+   of the bit buffer.  val is the actual byte to output in the case
+   of a literal, the base length or distance, or the offset from
+   the current table to the next table.  Each entry is four bytes. */
+typedef struct {
+    unsigned char op;           /* operation, extra bits, table bits */
+    unsigned char bits;         /* bits in this part of the code */
+    unsigned short val;         /* offset in table or code value */
+} code;
+
+/* op values as set by inflate_table():
+    00000000 - literal
+    0000tttt - table link, tttt != 0 is the number of table index bits
+    0001eeee - length or distance, eeee is the number of extra bits
+    01100000 - end of block
+    01000000 - invalid code
+ */
+
+/* Maximum size of dynamic tree.  The maximum found in a long but non-
+   exhaustive search was 1444 code structures (852 for length/literals
+   and 592 for distances, the latter actually the result of an
+   exhaustive search).  The true maximum is not known, but the value
+   below is more than safe. */
+#define ENOUGH 2048
+#define MAXD 592
+
+/* Type of code to build for inftable() */
+typedef enum {
+    CODES,
+    LENS,
+    DISTS
+} codetype;
+
+extern int inflate_table OF((codetype type, unsigned short FAR *lens,
+                             unsigned codes, code FAR * FAR *table,
+                             unsigned FAR *bits, unsigned short FAR *work));

deps/zlib/mozzconf.h

@@ -0,0 +1,130 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the mozilla zlib configuration.
+ *
+ * The Initial Developer of the Original Code is IBM Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 2004
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either of the GNU General Public License Version 2 or later (the "GPL"),
+ * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#ifndef MOZZCONF_H
+#define MOZZCONF_H
+
+#if defined(XP_WIN) && defined(ZLIB_DLL) && !defined(MOZ_ENABLE_LIBXUL)
+#undef ZLIB_DLL
+#endif
+
+#ifdef HAVE_VISIBILITY_ATTRIBUTE
+#define ZEXTERN __attribute__((visibility ("default"))) extern
+#endif
+
+/* Exported Symbols */
+#define zlibVersion MOZ_Z_zlibVersion
+#define deflate MOZ_Z_deflate
+#define deflateEnd MOZ_Z_deflateEnd
+#define inflate MOZ_Z_inflate
+#define inflateEnd MOZ_Z_inflateEnd
+#define deflateSetDictionary MOZ_Z_deflateSetDictionary
+#define deflateCopy MOZ_Z_deflateCopy
+#define deflateReset MOZ_Z_deflateReset
+#define deflateParams MOZ_Z_deflateParams
+#define deflateBound MOZ_Z_deflateBound
+#define deflatePrime MOZ_Z_deflatePrime
+#define inflateSetDictionary MOZ_Z_inflateSetDictionary
+#define inflateSync MOZ_Z_inflateSync
+#define inflateCopy MOZ_Z_inflateCopy
+#define inflateReset MOZ_Z_inflateReset
+#define inflateBack MOZ_Z_inflateBack
+#define inflateBackEnd MOZ_Z_inflateBackEnd
+#define zlibCompileFlags MOZ_Z_zlibCompileFlags
+#define compress MOZ_Z_compress
+#define compress2 MOZ_Z_compress2
+#define compressBound MOZ_Z_compressBound
+#define uncompress MOZ_Z_uncompress
+#define gzopen MOZ_Z_gzopen
+#define gzdopen MOZ_Z_gzdopen
+#define gzsetparams MOZ_Z_gzsetparams
+#define gzread MOZ_Z_gzread
+#define gzwrite MOZ_Z_gzwrite
+#define gzprintf MOZ_Z_gzprintf
+#define gzputs MOZ_Z_gzputs
+#define gzgets MOZ_Z_gzgets
+#define gzputc MOZ_Z_gzputc
+#define gzgetc MOZ_Z_gzgetc
+#define gzungetc MOZ_Z_gzungetc
+#define gzflush MOZ_Z_gzflush
+#define gzseek MOZ_Z_gzseek
+#define gzrewind MOZ_Z_gzrewind
+#define gztell MOZ_Z_gztell
+#define gzeof MOZ_Z_gzeof
+#define gzclose MOZ_Z_gzclose
+#define gzerror MOZ_Z_gzerror
+#define gzclearerr MOZ_Z_gzclearerr
+#define adler32 MOZ_Z_adler32
+#define crc32 MOZ_Z_crc32
+#define deflateInit_ MOZ_Z_deflateInit_
+#define deflateInit2_ MOZ_Z_deflateInit2_
+#define inflateInit_ MOZ_Z_inflateInit_
+#define inflateInit2_ MOZ_Z_inflateInit2_
+#define inflateBackInit_ MOZ_Z_inflateBackInit_
+#define inflateSyncPoint MOZ_Z_inflateSyncPoint
+#define get_crc_table MOZ_Z_get_crc_table
+#define zError MOZ_Z_zError
+
+/* Extra global symbols */
+#define _dist_code MOZ_Z__dist_code
+#define _length_code MOZ_Z__length_code
+#define _tr_align MOZ_Z__tr_align
+#define _tr_flush_block MOZ_Z__tr_flush_block
+#define _tr_init MOZ_Z__tr_init
+#define _tr_stored_block MOZ_Z__tr_stored_block
+#define _tr_tally MOZ_Z__tr_tally
+#define deflate_copyright MOZ_Z_deflate_copyright
+#define inflate_copyright MOZ_Z_inflate_copyright
+#define inflate_fast MOZ_Z_inflate_fast
+#define inflate_table MOZ_Z_inflate_table
+#define z_errmsg MOZ_Z_z_errmsg
+#define zcalloc MOZ_Z_zcalloc
+#define zcfree MOZ_Z_zcfree
+#define alloc_func MOZ_Z_alloc_func
+#define free_func MOZ_Z_free_func
+#define in_func MOZ_Z_in_func
+#define out_func MOZ_Z_out_func
+
+/* New as of libpng-1.2.3 */
+#define adler32_combine MOZ_Z_adler32_combine
+#define crc32_combine MOZ_Z_crc32_combine
+#define deflateSetHeader MOZ_Z_deflateSetHeader
+#define deflateTune MOZ_Z_deflateTune
+#define gzdirect MOZ_Z_gzdirect
+#define inflatePrime MOZ_Z_inflatePrime
+#define inflateGetHeader MOZ_Z_inflateGetHeader
+
+#endif

deps/zlib/trees.h

@@ -0,0 +1,128 @@
+/* header created automatically with -DGEN_TREES_H */
+
+local const ct_data static_ltree[L_CODES+2] = {
+{{ 12},{  8}}, {{140},{  8}}, {{ 76},{  8}}, {{204},{  8}}, {{ 44},{  8}},
+{{172},{  8}}, {{108},{  8}}, {{236},{  8}}, {{ 28},{  8}}, {{156},{  8}},
+{{ 92},{  8}}, {{220},{  8}}, {{ 60},{  8}}, {{188},{  8}}, {{124},{  8}},
+{{252},{  8}}, {{  2},{  8}}, {{130},{  8}}, {{ 66},{  8}}, {{194},{  8}},
+{{ 34},{  8}}, {{162},{  8}}, {{ 98},{  8}}, {{226},{  8}}, {{ 18},{  8}},
+{{146},{  8}}, {{ 82},{  8}}, {{210},{  8}}, {{ 50},{  8}}, {{178},{  8}},
+{{114},{  8}}, {{242},{  8}}, {{ 10},{  8}}, {{138},{  8}}, {{ 74},{  8}},
+{{202},{  8}}, {{ 42},{  8}}, {{170},{  8}}, {{106},{  8}}, {{234},{  8}},
+{{ 26},{  8}}, {{154},{  8}}, {{ 90},{  8}}, {{218},{  8}}, {{ 58},{  8}},
+{{186},{  8}}, {{122},{  8}}, {{250},{  8}}, {{  6},{  8}}, {{134},{  8}},
+{{ 70},{  8}}, {{198},{  8}}, {{ 38},{  8}}, {{166},{  8}}, {{102},{  8}},
+{{230},{  8}}, {{ 22},{  8}}, {{150},{  8}}, {{ 86},{  8}}, {{214},{  8}},
+{{ 54},{  8}}, {{182},{  8}}, {{118},{  8}}, {{246},{  8}}, {{ 14},{  8}},
+{{142},{  8}}, {{ 78},{  8}}, {{206},{  8}}, {{ 46},{  8}}, {{174},{  8}},
+{{110},{  8}}, {{238},{  8}}, {{ 30},{  8}}, {{158},{  8}}, {{ 94},{  8}},
+{{222},{  8}}, {{ 62},{  8}}, {{190},{  8}}, {{126},{  8}}, {{254},{  8}},
+{{  1},{  8}}, {{129},{  8}}, {{ 65},{  8}}, {{193},{  8}}, {{ 33},{  8}},
+{{161},{  8}}, {{ 97},{  8}}, {{225},{  8}}, {{ 17},{  8}}, {{145},{  8}},
+{{ 81},{  8}}, {{209},{  8}}, {{ 49},{  8}}, {{177},{  8}}, {{113},{  8}},
+{{241},{  8}}, {{  9},{  8}}, {{137},{  8}}, {{ 73},{  8}}, {{201},{  8}},
+{{ 41},{  8}}, {{169},{  8}}, {{105},{  8}}, {{233},{  8}}, {{ 25},{  8}},
+{{153},{  8}}, {{ 89},{  8}}, {{217},{  8}}, {{ 57},{  8}}, {{185},{  8}},
+{{121},{  8}}, {{249},{  8}}, {{  5},{  8}}, {{133},{  8}}, {{ 69},{  8}},
+{{197},{  8}}, {{ 37},{  8}}, {{165},{  8}}, {{101},{  8}}, {{229},{  8}},
+{{ 21},{  8}}, {{149},{  8}}, {{ 85},{  8}}, {{213},{  8}}, {{ 53},{  8}},
+{{181},{  8}}, {{117},{  8}}, {{245},{  8}}, {{ 13},{  8}}, {{141},{  8}},
+{{ 77},{  8}}, {{205},{  8}}, {{ 45},{  8}}, {{173},{  8}}, {{109},{  8}},
+{{237},{  8}}, {{ 29},{  8}}, {{157},{  8}}, {{ 93},{  8}}, {{221},{  8}},
+{{ 61},{  8}}, {{189},{  8}}, {{125},{  8}}, {{253},{  8}}, {{ 19},{  9}},
+{{275},{  9}}, {{147},{  9}}, {{403},{  9}}, {{ 83},{  9}}, {{339},{  9}},
+{{211},{  9}}, {{467},{  9}}, {{ 51},{  9}}, {{307},{  9}}, {{179},{  9}},
+{{435},{  9}}, {{115},{  9}}, {{371},{  9}}, {{243},{  9}}, {{499},{  9}},
+{{ 11},{  9}}, {{267},{  9}}, {{139},{  9}}, {{395},{  9}}, {{ 75},{  9}},
+{{331},{  9}}, {{203},{  9}}, {{459},{  9}}, {{ 43},{  9}}, {{299},{  9}},
+{{171},{  9}}, {{427},{  9}}, {{107},{  9}}, {{363},{  9}}, {{235},{  9}},
+{{491},{  9}}, {{ 27},{  9}}, {{283},{  9}}, {{155},{  9}}, {{411},{  9}},
+{{ 91},{  9}}, {{347},{  9}}, {{219},{  9}}, {{475},{  9}}, {{ 59},{  9}},
+{{315},{  9}}, {{187},{  9}}, {{443},{  9}}, {{123},{  9}}, {{379},{  9}},
+{{251},{  9}}, {{507},{  9}}, {{  7},{  9}}, {{263},{  9}}, {{135},{  9}},
+{{391},{  9}}, {{ 71},{  9}}, {{327},{  9}}, {{199},{  9}}, {{455},{  9}},
+{{ 39},{  9}}, {{295},{  9}}, {{167},{  9}}, {{423},{  9}}, {{103},{  9}},
+{{359},{  9}}, {{231},{  9}}, {{487},{  9}}, {{ 23},{  9}}, {{279},{  9}},
+{{151},{  9}}, {{407},{  9}}, {{ 87},{  9}}, {{343},{  9}}, {{215},{  9}},
+{{471},{  9}}, {{ 55},{  9}}, {{311},{  9}}, {{183},{  9}}, {{439},{  9}},
+{{119},{  9}}, {{375},{  9}}, {{247},{  9}}, {{503},{  9}}, {{ 15},{  9}},
+{{271},{  9}}, {{143},{  9}}, {{399},{  9}}, {{ 79},{  9}}, {{335},{  9}},
+{{207},{  9}}, {{463},{  9}}, {{ 47},{  9}}, {{303},{  9}}, {{175},{  9}},
+{{431},{  9}}, {{111},{  9}}, {{367},{  9}}, {{239},{  9}}, {{495},{  9}},
+{{ 31},{  9}}, {{287},{  9}}, {{159},{  9}}, {{415},{  9}}, {{ 95},{  9}},
+{{351},{  9}}, {{223},{  9}}, {{479},{  9}}, {{ 63},{  9}}, {{319},{  9}},
+{{191},{  9}}, {{447},{  9}}, {{127},{  9}}, {{383},{  9}}, {{255},{  9}},
+{{511},{  9}}, {{  0},{  7}}, {{ 64},{  7}}, {{ 32},{  7}}, {{ 96},{  7}},
+{{ 16},{  7}}, {{ 80},{  7}}, {{ 48},{  7}}, {{112},{  7}}, {{  8},{  7}},
+{{ 72},{  7}}, {{ 40},{  7}}, {{104},{  7}}, {{ 24},{  7}}, {{ 88},{  7}},
+{{ 56},{  7}}, {{120},{  7}}, {{  4},{  7}}, {{ 68},{  7}}, {{ 36},{  7}},
+{{100},{  7}}, {{ 20},{  7}}, {{ 84},{  7}}, {{ 52},{  7}}, {{116},{  7}},
+{{  3},{  8}}, {{131},{  8}}, {{ 67},{  8}}, {{195},{  8}}, {{ 35},{  8}},
+{{163},{  8}}, {{ 99},{  8}}, {{227},{  8}}
+};
+
+local const ct_data static_dtree[D_CODES] = {
+{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}},
+{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}},
+{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}},
+{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}},
+{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}},
+{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
+};
+
+const uch _dist_code[DIST_CODE_LEN] = {
+ 0,  1,  2,  3,  4,  4,  5,  5,  6,  6,  6,  6,  7,  7,  7,  7,  8,  8,  8,  8,
+ 8,  8,  8,  8,  9,  9,  9,  9,  9,  9,  9,  9, 10, 10, 10, 10, 10, 10, 10, 10,
+10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
+11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
+12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,  0,  0, 16, 17,
+18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
+};
+
+const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {
+ 0,  1,  2,  3,  4,  5,  6,  7,  8,  8,  9,  9, 10, 10, 11, 11, 12, 12, 12, 12,
+13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
+17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
+19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,
+21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22,
+22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28
+};
+
+local const int base_length[LENGTH_CODES] = {
+0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56,
+64, 80, 96, 112, 128, 160, 192, 224, 0
+};
+
+local const int base_dist[D_CODES] = {
+    0,     1,     2,     3,     4,     6,     8,    12,    16,    24,
+   32,    48,    64,    96,   128,   192,   256,   384,   512,   768,
+ 1024,  1536,  2048,  3072,  4096,  6144,  8192, 12288, 16384, 24576
+};
+

deps/zlib/uncompr.c

@@ -0,0 +1,61 @@
+/* uncompr.c -- decompress a memory buffer
+ * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id: uncompr.c,v 3.6 2005/08/04 19:14:14 tor%cs.brown.edu Exp $ */
+
+#define ZLIB_INTERNAL
+#include "zlib.h"
+
+/* ===========================================================================
+     Decompresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer. Upon entry, destLen is the total
+   size of the destination buffer, which must be large enough to hold the
+   entire uncompressed data. (The size of the uncompressed data must have
+   been saved previously by the compressor and transmitted to the decompressor
+   by some mechanism outside the scope of this compression library.)
+   Upon exit, destLen is the actual size of the compressed buffer.
+     This function can be used to decompress a whole file at once if the
+   input file is mmap'ed.
+
+     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer, or Z_DATA_ERROR if the input data was corrupted.
+*/
+int ZEXPORT uncompress (dest, destLen, source, sourceLen)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+{
+    z_stream stream;
+    int err;
+
+    stream.next_in = (Bytef*)source;
+    stream.avail_in = (uInt)sourceLen;
+    /* Check for source > 64K on 16-bit machine: */
+    if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
+
+    stream.next_out = dest;
+    stream.avail_out = (uInt)*destLen;
+    if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
+
+    stream.zalloc = (alloc_func)0;
+    stream.zfree = (free_func)0;
+
+    err = inflateInit(&stream);
+    if (err != Z_OK) return err;
+
+    err = inflate(&stream, Z_FINISH);
+    if (err != Z_STREAM_END) {
+        inflateEnd(&stream);
+        if (err == Z_NEED_DICT || (err == Z_BUF_ERROR && stream.avail_in == 0))
+            return Z_DATA_ERROR;
+        return err;
+    }
+    *destLen = stream.total_out;
+
+    err = inflateEnd(&stream);
+    return err;
+}

deps/zlib/zconf.h

@@ -0,0 +1,335 @@
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id: zconf.h,v 3.9 2005/08/04 19:14:14 tor%cs.brown.edu Exp $ */
+
+#ifndef ZCONF_H
+#define ZCONF_H
+
+/* This include does prefixing as below, but with an updated set of names */
+#include "mozzconf.h"
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ */
+#ifdef Z_PREFIX
+#  define deflateInit_          z_deflateInit_
+#  define deflate               z_deflate
+#  define deflateEnd            z_deflateEnd
+#  define inflateInit_          z_inflateInit_
+#  define inflate               z_inflate
+#  define inflateEnd            z_inflateEnd
+#  define deflateInit2_         z_deflateInit2_
+#  define deflateSetDictionary  z_deflateSetDictionary
+#  define deflateCopy           z_deflateCopy
+#  define deflateReset          z_deflateReset
+#  define deflateParams         z_deflateParams
+#  define deflateBound          z_deflateBound
+#  define deflatePrime          z_deflatePrime
+#  define inflateInit2_         z_inflateInit2_
+#  define inflateSetDictionary  z_inflateSetDictionary
+#  define inflateSync           z_inflateSync
+#  define inflateSyncPoint      z_inflateSyncPoint
+#  define inflateCopy           z_inflateCopy
+#  define inflateReset          z_inflateReset
+#  define inflateBack           z_inflateBack
+#  define inflateBackEnd        z_inflateBackEnd
+#  define compress              z_compress
+#  define compress2             z_compress2
+#  define compressBound         z_compressBound
+#  define uncompress            z_uncompress
+#  define adler32               z_adler32
+#  define crc32                 z_crc32
+#  define get_crc_table         z_get_crc_table
+#  define zError                z_zError
+
+#  define alloc_func            z_alloc_func
+#  define free_func             z_free_func
+#  define in_func               z_in_func
+#  define out_func              z_out_func
+#  define Byte                  z_Byte
+#  define uInt                  z_uInt
+#  define uLong                 z_uLong
+#  define Bytef                 z_Bytef
+#  define charf                 z_charf
+#  define intf                  z_intf
+#  define uIntf                 z_uIntf
+#  define uLongf                z_uLongf
+#  define voidpf                z_voidpf
+#  define voidp                 z_voidp
+#endif
+
+#if defined(__MSDOS__) && !defined(MSDOS)
+#  define MSDOS
+#endif
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+#  define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+#  define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+#  ifndef WIN32
+#    define WIN32
+#  endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+#  if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+#    ifndef SYS16BIT
+#      define SYS16BIT
+#    endif
+#  endif
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#ifdef SYS16BIT
+#  define MAXSEG_64K
+#endif
+#ifdef MSDOS
+#  define UNALIGNED_OK
+#endif
+
+#ifdef __STDC_VERSION__
+#  ifndef STDC
+#    define STDC
+#  endif
+#  if __STDC_VERSION__ >= 199901L
+#    ifndef STDC99
+#      define STDC99
+#    endif
+#  endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+#  define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC)    /* iSeries (formerly AS/400). */
+#  define STDC
+#endif
+
+#ifndef STDC
+#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+#    define const       /* note: need a more gentle solution here */
+#  endif
+#endif
+
+/* Some Mac compilers merge all .h files incorrectly: */
+#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
+#  define NO_DUMMY_DECL
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+#  ifdef MAXSEG_64K
+#    define MAX_MEM_LEVEL 8
+#  else
+#    define MAX_MEM_LEVEL 9
+#  endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+#  define MAX_WBITS   15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+            (1 << (windowBits+2)) +  (1 << (memLevel+9))
+ that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+   The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+                        /* Type declarations */
+
+#ifndef OF /* function prototypes */
+#  ifdef STDC
+#    define OF(args)  args
+#  else
+#    define OF(args)  ()
+#  endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#ifdef SYS16BIT
+#  if defined(M_I86SM) || defined(M_I86MM)
+     /* MSC small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef _MSC_VER
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#  if (defined(__SMALL__) || defined(__MEDIUM__))
+     /* Turbo C small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef __BORLANDC__
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#endif
+
+#if defined(WINDOWS) || defined(WIN32)
+   /* If building or using zlib as a DLL, define ZLIB_DLL.
+    * This is not mandatory, but it offers a little performance increase.
+    */
+#  ifdef ZLIB_DLL
+#    if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+#      ifdef ZLIB_INTERNAL
+#        define ZEXTERN extern __declspec(dllexport)
+#      else
+#        define ZEXTERN extern __declspec(dllimport)
+#      endif
+#    endif
+#  endif  /* ZLIB_DLL */
+   /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+    * define ZLIB_WINAPI.
+    * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+    */
+#  ifdef ZLIB_WINAPI
+#    ifdef FAR
+#      undef FAR
+#    endif
+#    include <windows.h>
+     /* No need for _export, use ZLIB.DEF instead. */
+     /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+#    define ZEXPORT WINAPI
+#    ifdef WIN32
+#      define ZEXPORTVA WINAPIV
+#    else
+#      define ZEXPORTVA FAR CDECL
+#    endif
+#  endif
+#endif
+
+#if defined (__BEOS__)
+#  ifdef ZLIB_DLL
+#    ifdef ZLIB_INTERNAL
+#      define ZEXPORT   __declspec(dllexport)
+#      define ZEXPORTVA __declspec(dllexport)
+#    else
+#      define ZEXPORT   __declspec(dllimport)
+#      define ZEXPORTVA __declspec(dllimport)
+#    endif
+#  endif
+#endif
+
+#ifndef ZEXTERN
+#  define ZEXTERN extern
+#endif
+#ifndef ZEXPORT
+#  define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+#  define ZEXPORTVA
+#endif
+
+#ifndef FAR
+#  define FAR
+#endif
+
+#if !defined(__MACTYPES__)
+typedef unsigned char  Byte;  /* 8 bits */
+#endif
+typedef unsigned int   uInt;  /* 16 bits or more */
+typedef unsigned long  uLong; /* 32 bits or more */
+
+#ifdef SMALL_MEDIUM
+   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+#  define Bytef Byte FAR
+#else
+   typedef Byte  FAR Bytef;
+#endif
+typedef char  FAR charf;
+typedef int   FAR intf;
+typedef uInt  FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+   typedef void const *voidpc;
+   typedef void FAR   *voidpf;
+   typedef void       *voidp;
+#else
+   typedef Byte const *voidpc;
+   typedef Byte FAR   *voidpf;
+   typedef Byte       *voidp;
+#endif
+
+#if 0           /* HAVE_UNISTD_H -- this line is updated by ./configure */
+#  include <sys/types.h> /* for off_t */
+#  include <unistd.h>    /* for SEEK_* and off_t */
+#  ifdef VMS
+#    include <unixio.h>   /* for off_t */
+#  endif
+#  define z_off_t off_t
+#endif
+#ifndef SEEK_SET
+#  define SEEK_SET        0       /* Seek from beginning of file.  */
+#  define SEEK_CUR        1       /* Seek from current position.  */
+#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
+#endif
+#ifndef z_off_t
+#  define z_off_t long
+#endif
+
+#if defined(__OS400__)
+#  define NO_vsnprintf
+#endif
+
+#if defined(__MVS__)
+#  define NO_vsnprintf
+#  ifdef FAR
+#    undef FAR
+#  endif
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+#   pragma map(deflateInit_,"DEIN")
+#   pragma map(deflateInit2_,"DEIN2")
+#   pragma map(deflateEnd,"DEEND")
+#   pragma map(deflateBound,"DEBND")
+#   pragma map(inflateInit_,"ININ")
+#   pragma map(inflateInit2_,"ININ2")
+#   pragma map(inflateEnd,"INEND")
+#   pragma map(inflateSync,"INSY")
+#   pragma map(inflateSetDictionary,"INSEDI")
+#   pragma map(compressBound,"CMBND")
+#   pragma map(inflate_table,"INTABL")
+#   pragma map(inflate_fast,"INFA")
+#   pragma map(inflate_copyright,"INCOPY")
+#endif
+
+#endif /* ZCONF_H */

deps/zlib/zlib.gyp

@@ -0,0 +1,98 @@
+# Copyright (c) 2009 The Chromium Authors. All rights reserved.
+# Use of this source code is governed by a BSD-style license that can be
+# found in the LICENSE file.
+
+{
+  'variables': {
+    'use_system_zlib%': 0
+  },
+  'conditions': [
+    ['use_system_zlib==0', {
+      'targets': [
+        {
+          'target_name': 'zlib',
+          'type': 'static_library',
+          'sources': [
+            'contrib/minizip/ioapi.c',
+            'contrib/minizip/ioapi.h',
+            'contrib/minizip/iowin32.c',
+            'contrib/minizip/iowin32.h',
+            'contrib/minizip/unzip.c',
+            'contrib/minizip/unzip.h',
+            'contrib/minizip/zip.c',
+            'contrib/minizip/zip.h',
+            'adler32.c',
+            'compress.c',
+            'crc32.c',
+            'crc32.h',
+            'deflate.c',
+            'deflate.h',
+            'gzio.c',
+            'infback.c',
+            'inffast.c',
+            'inffast.h',
+            'inffixed.h',
+            'inflate.c',
+            'inflate.h',
+            'inftrees.c',
+            'inftrees.h',
+            'mozzconf.h',
+            'trees.c',
+            'trees.h',
+            'uncompr.c',
+            'zconf.h',
+            'zlib.h',
+            'zutil.c',
+            'zutil.h',
+          ],
+          'include_dirs': [
+            '.',
+            # For contrib/minizip
+            './contrib/minizip',
+          ],
+          'direct_dependent_settings': {
+            'include_dirs': [
+              '.',
+            ],
+          },
+          'conditions': [
+            ['OS!="win"', {
+              'product_name': 'chrome_zlib',
+              'sources!': [
+                'contrib/minizip/iowin32.c'
+              ],
+            }],
+          ],
+        },
+      ],
+    }, {
+      'targets': [
+        {
+          'target_name': 'zlib',
+          'type': 'static_library',
+          'direct_dependent_settings': {
+            'defines': [
+              'USE_SYSTEM_ZLIB',
+            ],
+          },
+          'defines': [
+            'USE_SYSTEM_ZLIB',
+          ],
+          'sources': [
+            'contrib/minizip/ioapi.c',
+            'contrib/minizip/ioapi.h',
+            'contrib/minizip/unzip.c',
+            'contrib/minizip/unzip.h',
+            'contrib/minizip/zip.c',
+            'contrib/minizip/zip.h',
+          ],
+          'link_settings': {
+            'libraries': [
+              '-lz',
+            ],
+          },
+        },
+      ],
+    }],
+  ],
+}

deps/zlib/zutil.c

@@ -0,0 +1,320 @@
+/* zutil.c -- target dependent utility functions for the compression library
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id: zutil.c,v 3.11 2005/08/04 19:14:14 tor%cs.brown.edu Exp $ */
+
+#include "zutil.h"
+
+#ifndef NO_DUMMY_DECL
+struct internal_state      {int dummy;}; /* for buggy compilers */
+#endif
+
+const char * const z_errmsg[10] = {
+"need dictionary",     /* Z_NEED_DICT       2  */
+"stream end",          /* Z_STREAM_END      1  */
+"",                    /* Z_OK              0  */
+"file error",          /* Z_ERRNO         (-1) */
+"stream error",        /* Z_STREAM_ERROR  (-2) */
+"data error",          /* Z_DATA_ERROR    (-3) */
+"insufficient memory", /* Z_MEM_ERROR     (-4) */
+"buffer error",        /* Z_BUF_ERROR     (-5) */
+"incompatible version",/* Z_VERSION_ERROR (-6) */
+""};
+
+
+const char * ZEXPORT zlibVersion()
+{
+    return ZLIB_VERSION;
+}
+
+uLong ZEXPORT zlibCompileFlags()
+{
+    uLong flags;
+
+    flags = 0;
+    switch (sizeof(uInt)) {
+    case 2:     break;
+    case 4:     flags += 1;     break;
+    case 8:     flags += 2;     break;
+    default:    flags += 3;
+    }
+    switch (sizeof(uLong)) {
+    case 2:     break;
+    case 4:     flags += 1 << 2;        break;
+    case 8:     flags += 2 << 2;        break;
+    default:    flags += 3 << 2;
+    }
+    switch (sizeof(voidpf)) {
+    case 2:     break;
+    case 4:     flags += 1 << 4;        break;
+    case 8:     flags += 2 << 4;        break;
+    default:    flags += 3 << 4;
+    }
+    switch (sizeof(z_off_t)) {
+    case 2:     break;
+    case 4:     flags += 1 << 6;        break;
+    case 8:     flags += 2 << 6;        break;
+    default:    flags += 3 << 6;
+    }
+#ifdef DEBUG
+    flags += 1 << 8;
+#endif
+#if defined(ASMV) || defined(ASMINF)
+    flags += 1 << 9;
+#endif
+#ifdef ZLIB_WINAPI
+    flags += 1 << 10;
+#endif
+#ifdef BUILDFIXED
+    flags += 1 << 12;
+#endif
+#ifdef DYNAMIC_CRC_TABLE
+    flags += 1 << 13;
+#endif
+#ifdef NO_GZCOMPRESS
+    flags += 1L << 16;
+#endif
+#ifdef NO_GZIP
+    flags += 1L << 17;
+#endif
+#ifdef PKZIP_BUG_WORKAROUND
+    flags += 1L << 20;
+#endif
+#ifdef FASTEST
+    flags += 1L << 21;
+#endif
+#ifdef STDC
+#  ifdef NO_vsnprintf
+        flags += 1L << 25;
+#    ifdef HAS_vsprintf_void
+        flags += 1L << 26;
+#    endif
+#  else
+#    ifdef HAS_vsnprintf_void
+        flags += 1L << 26;
+#    endif
+#  endif
+#else
+        flags += 1L << 24;
+#  ifdef NO_snprintf
+        flags += 1L << 25;
+#    ifdef HAS_sprintf_void
+        flags += 1L << 26;
+#    endif
+#  else
+#    ifdef HAS_snprintf_void
+        flags += 1L << 26;
+#    endif
+#  endif
+#endif
+    return flags;
+}
+
+#ifdef DEBUG
+
+#  ifndef verbose
+#    define verbose 0
+#  endif
+int z_verbose = verbose;
+
+void z_error (m)
+    char *m;
+{
+    fprintf(stderr, "%s\n", m);
+    exit(1);
+}
+#endif
+
+/* exported to allow conversion of error code to string for compress() and
+ * uncompress()
+ */
+const char * ZEXPORT zError(err)
+    int err;
+{
+    return ERR_MSG(err);
+}
+
+#if defined(_WIN32_WCE)
+    /* The Microsoft C Run-Time Library for Windows CE doesn't have
+     * errno.  We define it as a global variable to simplify porting.
+     * Its value is always 0 and should not be used.
+     */
+    // Google Gears modification: zutil.h defines errno as z_errno for WinCE.
+    //int errno = 0;
+    int z_errno = 0;  
+#endif
+
+#ifndef HAVE_MEMCPY
+
+void zmemcpy(dest, source, len)
+    Bytef* dest;
+    const Bytef* source;
+    uInt  len;
+{
+    if (len == 0) return;
+    do {
+        *dest++ = *source++; /* ??? to be unrolled */
+    } while (--len != 0);
+}
+
+int zmemcmp(s1, s2, len)
+    const Bytef* s1;
+    const Bytef* s2;
+    uInt  len;
+{
+    uInt j;
+
+    for (j = 0; j < len; j++) {
+        if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
+    }
+    return 0;
+}
+
+void zmemzero(dest, len)
+    Bytef* dest;
+    uInt  len;
+{
+    if (len == 0) return;
+    do {
+        *dest++ = 0;  /* ??? to be unrolled */
+    } while (--len != 0);
+}
+#endif
+
+
+#ifdef SYS16BIT
+
+#ifdef __TURBOC__
+/* Turbo C in 16-bit mode */
+
+#  define MY_ZCALLOC
+
+/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
+ * and farmalloc(64K) returns a pointer with an offset of 8, so we
+ * must fix the pointer. Warning: the pointer must be put back to its
+ * original form in order to free it, use zcfree().
+ */
+
+#define MAX_PTR 10
+/* 10*64K = 640K */
+
+local int next_ptr = 0;
+
+typedef struct ptr_table_s {
+    voidpf org_ptr;
+    voidpf new_ptr;
+} ptr_table;
+
+local ptr_table table[MAX_PTR];
+/* This table is used to remember the original form of pointers
+ * to large buffers (64K). Such pointers are normalized with a zero offset.
+ * Since MSDOS is not a preemptive multitasking OS, this table is not
+ * protected from concurrent access. This hack doesn't work anyway on
+ * a protected system like OS/2. Use Microsoft C instead.
+ */
+
+voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
+{
+    voidpf buf = opaque; /* just to make some compilers happy */
+    ulg bsize = (ulg)items*size;
+
+    /* If we allocate less than 65520 bytes, we assume that farmalloc
+     * will return a usable pointer which doesn't have to be normalized.
+     */
+    if (bsize < 65520L) {
+        buf = farmalloc(bsize);
+        if (*(ush*)&buf != 0) return buf;
+    } else {
+        buf = farmalloc(bsize + 16L);
+    }
+    if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
+    table[next_ptr].org_ptr = buf;
+
+    /* Normalize the pointer to seg:0 */
+    *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
+    *(ush*)&buf = 0;
+    table[next_ptr++].new_ptr = buf;
+    return buf;
+}
+
+void  zcfree (voidpf opaque, voidpf ptr)
+{
+    int n;
+    if (*(ush*)&ptr != 0) { /* object < 64K */
+        farfree(ptr);
+        return;
+    }
+    /* Find the original pointer */
+    for (n = 0; n < next_ptr; n++) {
+        if (ptr != table[n].new_ptr) continue;
+
+        farfree(table[n].org_ptr);
+        while (++n < next_ptr) {
+            table[n-1] = table[n];
+        }
+        next_ptr--;
+        return;
+    }
+    ptr = opaque; /* just to make some compilers happy */
+    Assert(0, "zcfree: ptr not found");
+}
+
+#endif /* __TURBOC__ */
+
+
+#ifdef M_I86
+/* Microsoft C in 16-bit mode */
+
+#  define MY_ZCALLOC
+
+#if (!defined(_MSC_VER) || (_MSC_VER <= 600))
+#  define _halloc  halloc
+#  define _hfree   hfree
+#endif
+
+voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
+{
+    if (opaque) opaque = 0; /* to make compiler happy */
+    return _halloc((long)items, size);
+}
+
+void  zcfree (voidpf opaque, voidpf ptr)
+{
+    if (opaque) opaque = 0; /* to make compiler happy */
+    _hfree(ptr);
+}
+
+#endif /* M_I86 */
+
+#endif /* SYS16BIT */
+
+
+#ifndef MY_ZCALLOC /* Any system without a special alloc function */
+
+#ifndef STDC
+extern voidp  malloc OF((uInt size));
+extern voidp  calloc OF((uInt items, uInt size));
+extern void   free   OF((voidpf ptr));
+#endif
+
+voidpf zcalloc (opaque, items, size)
+    voidpf opaque;
+    unsigned items;
+    unsigned size;
+{
+    if (opaque) items += size - size; /* make compiler happy */
+    return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
+                              (voidpf)calloc(items, size);
+}
+
+void  zcfree (opaque, ptr)
+    voidpf opaque;
+    voidpf ptr;
+{
+    free(ptr);
+    if (opaque) return; /* make compiler happy */
+}
+
+#endif /* MY_ZCALLOC */

deps/zlib/zutil.h

@@ -0,0 +1,269 @@
+/* zutil.h -- internal interface and configuration of the compression library
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id: zutil.h,v 3.10 2005/08/04 19:14:14 tor%cs.brown.edu Exp $ */
+
+#ifndef ZUTIL_H
+#define ZUTIL_H
+
+#define ZLIB_INTERNAL
+#include "zlib.h"
+
+#ifdef STDC
+#  ifndef _WIN32_WCE
+#    include <stddef.h>
+#  endif
+#  include <string.h>
+#  include <stdlib.h>
+#endif
+#ifdef NO_ERRNO_H
+#   ifdef _WIN32_WCE
+      /* The Microsoft C Run-Time Library for Windows CE doesn't have
+       * errno.  We define it as a global variable to simplify porting.
+       * Its value is always 0 and should not be used.  We rename it to
+       * avoid conflict with other libraries that use the same workaround.
+       */
+#     define errno z_errno
+#   endif
+    extern int errno;
+#else
+#  ifndef _WIN32_WCE
+#    include <errno.h>
+#  endif
+#endif
+
+#ifndef local
+#  define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+typedef unsigned char  uch;
+typedef uch FAR uchf;
+typedef unsigned short ush;
+typedef ush FAR ushf;
+typedef unsigned long  ulg;
+
+extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
+/* (size given to avoid silly warnings with Visual C++) */
+
+#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
+
+#define ERR_RETURN(strm,err) \
+  return (strm->msg = (char*)ERR_MSG(err), (err))
+/* To be used only when the state is known to be valid */
+
+        /* common constants */
+
+#ifndef DEF_WBITS
+#  define DEF_WBITS MAX_WBITS
+#endif
+/* default windowBits for decompression. MAX_WBITS is for compression only */
+
+#if MAX_MEM_LEVEL >= 8
+#  define DEF_MEM_LEVEL 8
+#else
+#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
+#endif
+/* default memLevel */
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES    2
+/* The three kinds of block type */
+
+#define MIN_MATCH  3
+#define MAX_MATCH  258
+/* The minimum and maximum match lengths */
+
+#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
+
+        /* target dependencies */
+
+#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
+#  define OS_CODE  0x00
+#  if defined(__TURBOC__) || defined(__BORLANDC__)
+#    if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
+       /* Allow compilation with ANSI keywords only enabled */
+       void _Cdecl farfree( void *block );
+       void *_Cdecl farmalloc( unsigned long nbytes );
+#    else
+#      include <alloc.h>
+#    endif
+#  else /* MSC or DJGPP */
+#    include <malloc.h>
+#  endif
+#endif
+
+#ifdef AMIGA
+#  define OS_CODE  0x01
+#endif
+
+#if defined(VAXC) || defined(VMS)
+#  define OS_CODE  0x02
+#  define F_OPEN(name, mode) \
+     fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
+#endif
+
+#if defined(ATARI) || defined(atarist)
+#  define OS_CODE  0x05
+#endif
+
+#ifdef OS2
+#  define OS_CODE  0x06
+#  ifdef M_I86
+     #include <malloc.h>
+#  endif
+#endif
+
+#if defined(MACOS) || defined(TARGET_OS_MAC)
+#  define OS_CODE  0x07
+#  if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+#    include <unix.h> /* for fdopen */
+#  else
+#    ifndef fdopen
+#      define fdopen(fd,mode) NULL /* No fdopen() */
+#    endif
+#  endif
+#endif
+
+#ifdef TOPS20
+#  define OS_CODE  0x0a
+#endif
+
+#ifdef WIN32
+#  ifndef __CYGWIN__  /* Cygwin is Unix, not Win32 */
+#    define OS_CODE  0x0b
+#  endif
+#endif
+
+#ifdef __50SERIES /* Prime/PRIMOS */
+#  define OS_CODE  0x0f
+#endif
+
+#if defined(_BEOS_) || defined(RISCOS)
+#  define fdopen(fd,mode) NULL /* No fdopen() */
+#endif
+
+#if (defined(_MSC_VER) && (_MSC_VER > 600))
+#  if defined(_WIN32_WCE)
+#    define fdopen(fd,mode) NULL /* No fdopen() */
+#    ifndef _PTRDIFF_T_DEFINED
+       typedef int ptrdiff_t;
+#      define _PTRDIFF_T_DEFINED
+#    endif
+#  else
+#    define fdopen(fd,type)  _fdopen(fd,type)
+#  endif
+#endif
+
+        /* common defaults */
+
+#ifndef OS_CODE
+#  define OS_CODE  0x03  /* assume Unix */
+#endif
+
+#ifndef F_OPEN
+#  define F_OPEN(name, mode) fopen((name), (mode))
+#endif
+
+         /* functions */
+
+#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+#if defined(__CYGWIN__)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+#ifndef HAVE_VSNPRINTF
+#  ifdef MSDOS
+     /* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
+        but for now we just assume it doesn't. */
+#    define NO_vsnprintf
+#  endif
+#  ifdef __TURBOC__
+#    define NO_vsnprintf
+#  endif
+#  ifdef WIN32
+     /* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
+#    if !defined(vsnprintf) && !defined(NO_vsnprintf)
+#      define vsnprintf _vsnprintf
+#    endif
+#  endif
+#  ifdef __SASC
+#    define NO_vsnprintf
+#  endif
+#endif
+#ifdef VMS
+#  define NO_vsnprintf
+#endif
+
+#if defined(pyr)
+#  define NO_MEMCPY
+#endif
+#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
+ /* Use our own functions for small and medium model with MSC <= 5.0.
+  * You may have to use the same strategy for Borland C (untested).
+  * The __SC__ check is for Symantec.
+  */
+#  define NO_MEMCPY
+#endif
+#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
+#  define HAVE_MEMCPY
+#endif
+#ifdef HAVE_MEMCPY
+#  ifdef SMALL_MEDIUM /* MSDOS small or medium model */
+#    define zmemcpy _fmemcpy
+#    define zmemcmp _fmemcmp
+#    define zmemzero(dest, len) _fmemset(dest, 0, len)
+#  else
+#    define zmemcpy memcpy
+#    define zmemcmp memcmp
+#    define zmemzero(dest, len) memset(dest, 0, len)
+#  endif
+#else
+   extern void zmemcpy  OF((Bytef* dest, const Bytef* source, uInt len));
+   extern int  zmemcmp  OF((const Bytef* s1, const Bytef* s2, uInt len));
+   extern void zmemzero OF((Bytef* dest, uInt len));
+#endif
+
+/* Diagnostic functions */
+#ifdef DEBUG
+#  include <stdio.h>
+   extern int z_verbose;
+   extern void z_error    OF((char *m));
+#  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
+#  define Trace(x) {if (z_verbose>=0) fprintf x ;}
+#  define Tracev(x) {if (z_verbose>0) fprintf x ;}
+#  define Tracevv(x) {if (z_verbose>1) fprintf x ;}
+#  define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
+#  define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
+#else
+#  define Assert(cond,msg)
+#  define Trace(x)
+#  define Tracev(x)
+#  define Tracevv(x)
+#  define Tracec(c,x)
+#  define Tracecv(c,x)
+#endif
+
+
+voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
+void   zcfree  OF((voidpf opaque, voidpf ptr));
+
+#define ZALLOC(strm, items, size) \
+           (*((strm)->zalloc))((strm)->opaque, (items), (size))
+#define ZFREE(strm, addr)  (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
+#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
+
+#endif /* ZUTIL_H */

doc/api/zlib.markdown

@@ -0,0 +1,95 @@
+## Zlib
+
+You can access this module with:
+
+    var zlib = require('zlib');
+    var gzip = zlib.createGzip();
+    var fs = require('fs');
+    var inp = fs.createReadStream('input.txt');
+    var out = fs.createWriteStream('input.txt.gz');
+
+    inp.pipe(gzip).pipe(out);
+
+This provides bindings to Gzip/Gunzip, Deflate/Inflate, and
+DeflateRaw/InflateRaw classes.  Each class takes the same options, and
+is a readable/writable Stream.
+
+### Constants
+
+All of the constants defined in zlib.h are also defined on
+`require('zlib')`.  They are described in more detail in the zlib
+documentation.  See <http://zlib.net/manual.html#Constants>
+for more details.
+
+### zlib.Gzip
+
+Compress data using gzip.
+
+### zlib.Gunzip
+
+Decompress a gzip stream.
+
+### zlib.Deflate
+
+Compress data using deflate.
+
+### zlib.Inflate
+
+Decompress a deflate stream.
+
+### zlib.DeflateRaw
+
+Compress data using deflate, and do not append a zlib header.
+
+### zlib.InflateRaw
+
+Decompress a raw deflate stream.
+
+### zlib.Unzip
+
+Decompress either a Gzip- or Deflate-compressed stream by auto-detecting
+the header.
+
+### Options
+
+Each class takes an options object.  All options are optional.
+
+Note that some options are only
+relevant when compressing, and are ignored by the decompression classes.
+
+* chunkSize (default: 16*1024)
+* windowBits
+* level (compression only)
+* memLevel (compression only)
+* strategy (compression only)
+
+See the description of `deflateInit2` and `inflateInit2` at
+<http://zlib.net/manual.html#Advanced> for more information on these.
+
+### Memory Usage Tuning
+
+From `zlib/zconf.h`, modified to node's usage:
+
+The memory requirements for deflate are (in bytes):
+
+    (1 << (windowBits+2)) +  (1 << (memLevel+9))
+
+that is: 128K for windowBits=15  +  128K for memLevel = 8
+(default values) plus a few kilobytes for small objects.
+
+For example, if you want to reduce
+the default memory requirements from 256K to 128K, set the options to:
+
+    { windowBits: 14, memLevel: 7 }
+
+Of course this will generally degrade compression (there's no free lunch).
+
+The memory requirements for inflate are (in bytes)
+
+    1 << windowBits
+
+that is, 32K for windowBits=15 (default value) plus a few kilobytes
+for small objects.
+
+This is in addition to a single internal output slab buffer of size
+`chunkSize`, which defaults to 16K.

lib/zlib.js

@@ -0,0 +1,325 @@
+// Copyright Joyent, Inc. and other Node contributors.
+//
+// Permission is hereby granted, free of charge, to any person obtaining a
+// copy of this software and associated documentation files (the
+// "Software"), to deal in the Software without restriction, including
+// without limitation the rights to use, copy, modify, merge, publish,
+// distribute, sublicense, and/or sell copies of the Software, and to permit
+// persons to whom the Software is furnished to do so, subject to the
+// following conditions:
+//
+// The above copyright notice and this permission notice shall be included
+// in all copies or substantial portions of the Software.
+//
+// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
+// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+// USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+var binding = process.binding('zlib');
+var util = require('util');
+var stream = require('stream');
+
+// zlib doesn't provide these, so kludge them in following the same
+// const naming scheme zlib uses.
+binding.Z_MIN_WINDOWBITS = 8;
+binding.Z_MAX_WINDOWBITS = 15;
+binding.Z_DEFAULT_WINDOWBITS = 15;
+
+// fewer than 64 bytes per chunk is stupid.
+// technically it could work with as few as 8, but even 64 bytes
+// is absurdly low.  Usually a MB or more is best.
+binding.Z_MIN_CHUNK = 64;
+binding.Z_MAX_CHUNK = Infinity;
+binding.Z_DEFAULT_CHUNK = (16 * 1024);
+
+binding.Z_MIN_MEMLEVEL = 1;
+binding.Z_MAX_MEMLEVEL = 9;
+binding.Z_DEFAULT_MEMLEVEL = 8;
+
+binding.Z_MIN_LEVEL = -1;
+binding.Z_MAX_LEVEL = 9;
+binding.Z_DEFAULT_LEVEL = binding.Z_DEFAULT_COMPRESSION;
+
+// expose all the zlib constants
+Object.keys(binding).forEach(function(k) {
+  if (k.match(/^Z/)) exports[k] = binding[k];
+});
+
+
+exports.Deflate = Deflate;
+exports.Inflate = Inflate;
+exports.Gzip = Gzip;
+exports.Gunzip = Gunzip;
+exports.DeflateRaw = DeflateRaw;
+exports.InflateRaw = InflateRaw;
+exports.Unzip = Unzip;
+
+exports.createDeflate    = function (o) { return new Deflate(o);    };
+exports.createInflate    = function (o) { return new Inflate(o);    };
+exports.createDeflateRaw = function (o) { return new DeflateRaw(o); };
+exports.createInflateRaw = function (o) { return new InflateRaw(o); };
+exports.createGzip       = function (o) { return new Gzip(o);       };
+exports.createGunzip     = function (o) { return new Gunzip(o);     };
+exports.createUnzip      = function (o) { return new Unzip(o);      };
+
+
+
+// generic zlib
+// minimal 2-byte header
+function Deflate(opts) {
+  if (!(this instanceof Deflate)) return new Deflate(opt);
+  Zlib.call(this, opts, binding.Deflate);
+}
+
+function Inflate(opts) {
+  if (!(this instanceof Inflate)) return new Inflate(opts);
+  Zlib.call(this, opts, binding.Inflate);
+}
+
+
+
+// gzip - bigger header, same deflate compression
+function Gzip(opts) {
+  if (!(this instanceof Gzip)) return new Gzip(opts);
+  Zlib.call(this, opts, binding.Gzip);
+}
+
+function Gunzip(opts) {
+  if (!(this instanceof Gunzip)) return new Gunzip(opts);
+  Zlib.call(this, opts, binding.Gunzip);
+}
+
+
+
+// raw - no header
+function DeflateRaw(opts) {
+  if (!(this instanceof DeflateRaw)) return new DeflateRaw(opts);
+  Zlib.call(this, opts, binding.DeflateRaw);
+}
+
+function InflateRaw(opts) {
+  if (!(this instanceof InflateRaw)) return new InflateRaw(opts);
+  Zlib.call(this, opts, binding.InflateRaw);
+}
+
+
+// auto-detect header.
+function Unzip(opts) {
+  if (!(this instanceof Unzip)) return new Unzip(opts);
+  Zlib.call(this, opts, binding.Unzip);
+}
+
+
+// the Zlib class they all inherit from
+// This thing manages the queue of requests, and returns
+// true or false if there is anything in the queue when
+// you call the .write() method.
+
+function Zlib(opts, Binding) {
+  this._opts = opts = opts || {};
+  this._queue = [];
+  this._processing = false;
+  this._ended = false;
+  this.readable = true;
+  this.writable = true;
+  this._flush = binding.Z_NO_FLUSH;
+
+  if (opts.chunkSize) {
+    if (opts.chunkSize < exports.Z_MIN_CHUNK ||
+        opts.chunkSize > exports.Z_MAX_CHUNK) {
+      throw new Error("Invalid chunk size: "+opts.chunkSize);
+    }
+  }
+
+  if (opts.windowBits) {
+    if (opts.windowBits < exports.Z_MIN_WINDOWBITS ||
+        opts.windowBits > exports.Z_MAX_WINDOWBITS) {
+      throw new Error("Invalid windowBits: "+opts.windowBits);
+    }
+  }
+
+  if (opts.level) {
+    if (opts.level < exports.Z_MIN_LEVEL ||
+        opts.level > exports.Z_MAX_LEVEL) {
+      throw new Error("Invalid compression level: "+opts.level);
+    }
+  }
+
+  if (opts.memLevel) {
+    if (opts.memLevel < exports.Z_MIN_MEMLEVEL ||
+        opts.memLevel > exports.Z_MAX_MEMLEVEL) {
+      throw new Error("Invalid memLevel: "+opts.memLevel);
+    }
+  }
+
+  if (opts.strategy) {
+    if (opts.strategy != exports.Z_FILTERED &&
+        opts.strategy != exports.Z_HUFFMAN_ONLY &&
+        opts.strategy != exports.Z_RLE &&
+        opts.strategy != exports.Z_FIXED &&
+        opts.strategy != exports.Z_DEFAULT_STRATEGY) {
+      throw new Error("Invalid strategy: "+opts.strategy);
+    }
+  }
+
+  this._binding = new Binding();
+  this._binding.init(opts.windowBits || exports.Z_DEFAULT_WINDOWBITS,
+                     opts.level      || exports.Z_DEFAULT_COMPRESSION,
+                     opts.memLevel   || exports.Z_DEFAULT_MEMLEVEL,
+                     opts.strategy   || exports.Z_DEFAULT_STRATEGY);
+
+  this._chunkSize = opts.chunkSize || exports.Z_DEFAULT_CHUNK;
+  this._buffer = new Buffer(this._chunkSize);
+  this._offset = 0;
+  var self = this;
+
+  this._binding.onData = function(c) {
+    self.emit('data', c);
+  };
+
+  this._binding.onEnd = function() {
+    self.emit('end');
+  };
+}
+
+util.inherits(Zlib, stream.Stream);
+
+Zlib.prototype.write = function write(chunk, cb) {
+  if (this._ended) {
+    return this.emit('error', new Error('Cannot write after end'));
+  }
+
+  if (arguments.length === 1 && typeof chunk === 'function') {
+    cb = chunk;
+    chunk = null;
+  }
+
+  if (!chunk) {
+    chunk = null;
+  } else if (typeof chunk === 'string') {
+    chunk = new Buffer(chunk);
+  } else if (!Buffer.isBuffer(chunk)) {
+    return this.emit('error', new Error('Invalid argument'));
+  }
+
+
+  var empty = this._queue.length === 0;
+
+  this._queue.push([chunk, cb]);
+  this._process();
+  if (!empty) {
+    this._needDrain = true;
+  }
+  return empty;
+};
+
+Zlib.prototype.flush = function flush(cb) {
+  this._flush = binding.Z_SYNC_FLUSH;
+  return this.write(cb);
+};
+
+Zlib.prototype.end = function end(chunk, cb) {
+  var self = this;
+  this._ending = true;
+  var ret = this.write(chunk, function() {
+    self.emit('end');
+    if (cb) cb();
+  });
+  this._ended = true;
+  return ret;
+};
+
+Zlib.prototype._process = function() {
+  if (this._processing || this._paused) return;
+
+  if (this._queue.length === 0) {
+    if (this._needDrain) {
+      this._needDrain = false;
+      this.emit('drain');
+    }
+    return;
+  }
+
+  var req = this._queue.shift();
+  var cb = req.pop();
+  var chunk = req.pop();
+
+  if (this._ending && this._queue.length === 0) {
+    this._flush = binding.Z_FINISH;
+  }
+
+  var self = this;
+  var availInBefore = chunk && chunk.length;
+  var availOutBefore = this._chunkSize - this._offset;
+
+  var inOff = 0;
+  var req = this._binding.write(this._flush,
+                                chunk, // in
+                                inOff, // in_off
+                                availInBefore, // in_len
+                                this._buffer, // out
+                                this._offset, //out_off
+                                availOutBefore); // out_len
+
+  req.buffer = chunk;
+  req.callback = callback;
+  this._processing = req;
+
+  function callback(availInAfter, availOutAfter) {
+    var have = self.chunkSize - availOutAfter;
+    if (have > 0) {
+      var out = self._buffer.slice(self._offset, self._offset + have);
+      self._offset += have;
+    }
+
+    // XXX Maybe have a 'min buffer' size so we don't dip into the
+    // thread pool with only 1 byte available or something?
+    if (availOutAfter === 0 || self._offset >= self._chunkSize) {
+      self._offset = 0;
+      self._buffer = new Buffer(self._chunkSize);
+    }
+
+    if (availOutAfter === 0) {
+      // Not actually done.  Need to reprocess.
+      inOff += (availInBefore - availInAfter);
+      var newReq = self._binding.write(self._flush,
+                                       chunk,
+                                       inOff,
+                                       availInAfter,
+                                       self._buffer,
+                                       self._offset,
+                                       self._chunkSize);
+      newReq.callback = callback; // this same function
+      newReq.buffer = chunk;
+      self._processing = newReq;
+      return;
+    }
+
+    // finished with the chunk.
+    self._processing = false;
+    if (cb) cb();
+    self._process();
+  }
+};
+
+Zlib.prototype.pause = function() {
+  this._paused = true;
+  this.emit('pause');
+};
+
+Zlib.prototype.resume = function() {
+  this._paused = false;
+  this.emit('resume');
+};
+
+util.inherits(Deflate, Zlib);
+util.inherits(Inflate, Zlib);
+util.inherits(Gzip, Zlib);
+util.inherits(Gunzip, Zlib);
+util.inherits(DeflateRaw, Zlib);
+util.inherits(InflateRaw, Zlib);
+util.inherits(Unzip, Zlib);

node.gyp

@@ -49,6 +49,7 @@
       'lib/url.js',
       'lib/util.js',
       'lib/vm.js',
+      'lib/zlib.js',
     ],
   },
 
@@ -61,6 +62,7 @@
         'deps/http_parser/http_parser.gyp:http_parser',
         'deps/v8/tools/gyp/v8-node.gyp:v8',
         'deps/uv/uv.gyp:uv',
+        'deps/zlib/zlib.gyp:zlib',
         'node_js2c#host',
       ],
 
@@ -85,6 +87,7 @@
         'src/node_os.cc',
         'src/node_script.cc',
         'src/node_string.cc',
+        'src/node_zlib.cc',
         'src/pipe_wrap.cc',
         'src/stdio_wrap.cc',
         'src/stream_wrap.cc',
@@ -113,6 +116,7 @@
         'src/node_stdio.h',
         'src/node_string.h',
         'src/node_version.h',
+        'src/node_zlib.h',
         'src/pipe_wrap.h',
         'src/platform.h',
         'src/req_wrap.h',

src/node_extensions.h

@@ -40,6 +40,7 @@ NODE_EXT_LIST_ITEM(node_signal_watcher)
 #endif
 NODE_EXT_LIST_ITEM(node_stdio)
 NODE_EXT_LIST_ITEM(node_os)
+NODE_EXT_LIST_ITEM(node_zlib)
 
 // libuv rewrite
 NODE_EXT_LIST_ITEM(node_timer_wrap)

src/node_zlib.cc

@@ -0,0 +1,359 @@
+// Copyright Joyent, Inc. and other Node contributors.
+//
+// Permission is hereby granted, free of charge, to any person obtaining a
+// copy of this software and associated documentation files (the
+// "Software"), to deal in the Software without restriction, including
+// without limitation the rights to use, copy, modify, merge, publish,
+// distribute, sublicense, and/or sell copies of the Software, and to permit
+// persons to whom the Software is furnished to do so, subject to the
+// following conditions:
+//
+// The above copyright notice and this permission notice shall be included
+// in all copies or substantial portions of the Software.
+//
+// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
+// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+// USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+
+#include <v8.h>
+#include <errno.h>
+#include <string.h>
+#include <stdlib.h>
+#include <sys/types.h>
+#include <zlib.h>
+
+#include <node.h>
+#include <node_buffer.h>
+#include <req_wrap.h>
+
+
+
+namespace node {
+using namespace v8;
+
+// write() returns one of these, and then calls the cb() when it's done.
+typedef ReqWrap<uv_work_t> WorkReqWrap;
+
+static Persistent<String> ondata_sym;
+static Persistent<String> callback_sym;
+
+enum node_zlib_mode {
+  DEFLATE = 1,
+  INFLATE,
+  GZIP,
+  GUNZIP,
+  DEFLATERAW,
+  INFLATERAW,
+  UNZIP
+};
+
+template <node_zlib_mode mode> class ZCtx;
+
+
+void InitZlib(v8::Handle<v8::Object> target);
+
+
+/**
+ * Deflate/Inflate
+ */
+template <node_zlib_mode mode> class ZCtx : public ObjectWrap {
+ public:
+
+  ZCtx() : ObjectWrap() {
+  }
+
+  ~ZCtx() {
+    if (mode == DEFLATE || mode == GZIP || mode == DEFLATERAW) {
+      (void)deflateEnd(&strm_);
+    } else if (mode == INFLATE || mode == GUNZIP || mode == INFLATERAW) {
+      (void)inflateEnd(&strm_);
+    }
+  }
+
+  // write(flush, in, in_off, in_len, out, out_off, out_len)
+  static Handle<Value>
+  Write(const Arguments& args) {
+    assert(args.Length() == 7);
+
+    ZCtx<mode> *ctx = ObjectWrap::Unwrap< ZCtx<mode> >(args.This());
+    assert(ctx->init_done_ && "write before init");
+
+    unsigned int flush = args[0]->Uint32Value();
+    Bytef *in;
+    Bytef *out;
+    size_t in_off, in_len, out_off, out_len;
+
+    if (args[1]->IsNull()) {
+      // just a flush
+      Bytef nada[1] = { 0 };
+      in = nada;
+      in_len = 0;
+      in_off = 0;
+    } else {
+      assert(Buffer::HasInstance(args[1]));
+      Local<Object> in_buf;
+      in_buf = args[1]->ToObject();
+      in_off = (size_t)args[2]->Uint32Value();
+      in_len = (size_t)args[3]->Uint32Value();
+
+      assert(in_off + in_len <= Buffer::Length(in_buf));
+      in = reinterpret_cast<Bytef *>(Buffer::Data(in_buf) + in_off);
+    }
+
+    assert(Buffer::HasInstance(args[4]));
+    Local<Object> out_buf = args[4]->ToObject();
+    out_off = (size_t)args[5]->Uint32Value();
+    out_len = (size_t)args[6]->Uint32Value();
+    assert(out_off + out_len <= Buffer::Length(out_buf));
+    out = reinterpret_cast<Bytef *>(Buffer::Data(out_buf) + out_off);
+
+    WorkReqWrap *req_wrap = new WorkReqWrap();
+
+    req_wrap->data_ = ctx;
+    ctx->strm_.avail_in = in_len;
+    ctx->strm_.next_in = &(*in);
+    ctx->strm_.avail_out = out_len;
+    ctx->strm_.next_out = out;
+    ctx->flush_ = flush;
+
+    // set this so that later on, I can easily tell how much was written.
+    ctx->chunk_size_ = out_len;
+
+    // build up the work request
+    uv_work_t* work_req = new uv_work_t();
+    work_req->data = req_wrap;
+
+    uv_queue_work(uv_default_loop(),
+                  work_req,
+                  ZCtx<mode>::Process,
+                  ZCtx<mode>::After);
+
+    req_wrap->Dispatched();
+
+    return req_wrap->object_;
+  }
+
+
+  // thread pool!
+  // This function may be called multiple times on the uv_work pool
+  // for a single write() call, until all of the input bytes have
+  // been consumed.
+  static void
+  Process(uv_work_t* work_req) {
+    WorkReqWrap *req_wrap = reinterpret_cast<WorkReqWrap *>(work_req->data);
+    ZCtx<mode> *ctx = (ZCtx<mode> *)req_wrap->data_;
+
+    // If the avail_out is left at 0, then it means that it ran out
+    // of room.  If there was avail_out left over, then it means
+    // that all of the input was consumed.
+    int err;
+    switch (mode) {
+      case DEFLATE:
+      case GZIP:
+      case DEFLATERAW:
+        err = deflate(&(ctx->strm_), ctx->flush_);
+        break;
+      case UNZIP:
+      case INFLATE:
+      case GUNZIP:
+      case INFLATERAW:
+        err = inflate(&(ctx->strm_), ctx->flush_);
+        break;
+      default:
+        assert(0 && "wtf?");
+    }
+    assert(err != Z_STREAM_ERROR);
+
+    // now After will emit the output, and
+    // either schedule another call to Process,
+    // or shift the queue and call Process.
+  }
+
+  // v8 land!
+  static void
+  After(uv_work_t* work_req) {
+    WorkReqWrap *req_wrap = reinterpret_cast<WorkReqWrap *>(work_req->data);
+    ZCtx<mode> *ctx = (ZCtx<mode> *)req_wrap->data_;
+    Local<Integer> avail_out = Integer::New(ctx->strm_.avail_out);
+    Local<Integer> avail_in = Integer::New(ctx->strm_.avail_in);
+
+    // call the write() cb
+    assert(req_wrap->object_->Get(callback_sym)->IsFunction() &&
+           "Invalid callback");
+    Local<Value> args[2] = { avail_in, avail_out };
+    MakeCallback(req_wrap->object_, "callback", 2, args);
+
+    // delete the ReqWrap
+    delete req_wrap;
+  }
+
+  static Handle<Value>
+  New(const Arguments& args) {
+    HandleScope scope;
+    ZCtx<mode> *ctx = new ZCtx<mode>();
+    ctx->Wrap(args.This());
+    return args.This();
+  }
+
+  // just pull the ints out of the args and call the other Init
+  static Handle<Value>
+  Init(const Arguments& args) {
+    HandleScope scope;
+
+    assert(args.Length() == 4 &&
+           "init(level, windowBits, memLevel, strategy)");
+
+    ZCtx<mode> *ctx = ObjectWrap::Unwrap< ZCtx<mode> >(args.This());
+
+    int windowBits = args[0]->Uint32Value();
+    assert((windowBits >= 8 && windowBits <= 15) && "invalid windowBits");
+
+    int level = args[1]->Uint32Value();
+    assert((level >= -1 && level <= 9) && "invalid compression level");
+
+    int memLevel = args[2]->Uint32Value();
+    assert((memLevel >= 1 && memLevel <= 9) && "invalid memlevel");
+
+    int strategy = args[3]->Uint32Value();
+    assert((strategy == Z_FILTERED ||
+            strategy == Z_HUFFMAN_ONLY ||
+            strategy == Z_RLE ||
+            strategy == Z_FIXED ||
+            strategy == Z_DEFAULT_STRATEGY) && "invalid strategy");
+
+    Init(ctx, level, windowBits, memLevel, strategy);
+    return Undefined();
+  }
+
+  static void
+  Init(ZCtx *ctx,
+       int level,
+       int windowBits,
+       int memLevel,
+       int strategy) {
+    ctx->level_ = level;
+    ctx->windowBits_ = windowBits;
+    ctx->memLevel_ = memLevel;
+    ctx->strategy_ = strategy;
+
+    ctx->strm_.zalloc = Z_NULL;
+    ctx->strm_.zfree = Z_NULL;
+    ctx->strm_.opaque = Z_NULL;
+
+    ctx->flush_ = Z_NO_FLUSH;
+
+    if (mode == GZIP || mode == GUNZIP) {
+      ctx->windowBits_ += 16;
+    }
+
+    if (mode == UNZIP) {
+      ctx->windowBits_ += 32;
+    }
+
+    if (mode == DEFLATERAW || mode == INFLATERAW) {
+      ctx->windowBits_ *= -1;
+    }
+
+    int err;
+    switch (mode) {
+      case DEFLATE:
+      case GZIP:
+      case DEFLATERAW:
+        err = deflateInit2(&(ctx->strm_),
+                           ctx->level_,
+                           Z_DEFLATED,
+                           ctx->windowBits_,
+                           ctx->memLevel_,
+                           ctx->strategy_);
+        break;
+      case INFLATE:
+      case GUNZIP:
+      case INFLATERAW:
+      case UNZIP:
+        err = inflateInit2(&(ctx->strm_), ctx->windowBits_);
+        break;
+      default:
+        assert(0 && "wtf?");
+    }
+
+    ctx->init_done_ = true;
+    assert(err == Z_OK);
+  }
+
+ private:
+
+  bool init_done_;
+
+  z_stream strm_;
+  int level_;
+  int windowBits_;
+  int memLevel_;
+  int strategy_;
+
+  int flush_;
+
+  int chunk_size_;
+};
+
+
+#define NODE_ZLIB_CLASS(mode, name)   \
+  { \
+    Local<FunctionTemplate> z = FunctionTemplate::New(ZCtx<mode>::New); \
+    z->InstanceTemplate()->SetInternalFieldCount(1); \
+    NODE_SET_PROTOTYPE_METHOD(z, "write", ZCtx<mode>::Write); \
+    NODE_SET_PROTOTYPE_METHOD(z, "init", ZCtx<mode>::Init); \
+    z->SetClassName(String::NewSymbol(name)); \
+    target->Set(String::NewSymbol(name), z->GetFunction()); \
+  }
+
+void InitZlib(Handle<Object> target) {
+  HandleScope scope;
+
+  NODE_ZLIB_CLASS(INFLATE, "Inflate")
+  NODE_ZLIB_CLASS(DEFLATE, "Deflate")
+  NODE_ZLIB_CLASS(INFLATERAW, "InflateRaw")
+  NODE_ZLIB_CLASS(DEFLATERAW, "DeflateRaw")
+  NODE_ZLIB_CLASS(GZIP, "Gzip")
+  NODE_ZLIB_CLASS(GUNZIP, "Gunzip")
+  NODE_ZLIB_CLASS(UNZIP, "Unzip")
+
+  ondata_sym = NODE_PSYMBOL("onData");
+  callback_sym = NODE_PSYMBOL("callback");
+
+  NODE_DEFINE_CONSTANT(target, Z_NO_FLUSH);
+  NODE_DEFINE_CONSTANT(target, Z_PARTIAL_FLUSH);
+  NODE_DEFINE_CONSTANT(target, Z_SYNC_FLUSH);
+  NODE_DEFINE_CONSTANT(target, Z_FULL_FLUSH);
+  NODE_DEFINE_CONSTANT(target, Z_FINISH);
+  NODE_DEFINE_CONSTANT(target, Z_BLOCK);
+  NODE_DEFINE_CONSTANT(target, Z_OK);
+  NODE_DEFINE_CONSTANT(target, Z_STREAM_END);
+  NODE_DEFINE_CONSTANT(target, Z_NEED_DICT);
+  NODE_DEFINE_CONSTANT(target, Z_ERRNO);
+  NODE_DEFINE_CONSTANT(target, Z_STREAM_ERROR);
+  NODE_DEFINE_CONSTANT(target, Z_DATA_ERROR);
+  NODE_DEFINE_CONSTANT(target, Z_MEM_ERROR);
+  NODE_DEFINE_CONSTANT(target, Z_BUF_ERROR);
+  NODE_DEFINE_CONSTANT(target, Z_VERSION_ERROR);
+  NODE_DEFINE_CONSTANT(target, Z_NO_COMPRESSION);
+  NODE_DEFINE_CONSTANT(target, Z_BEST_SPEED);
+  NODE_DEFINE_CONSTANT(target, Z_BEST_COMPRESSION);
+  NODE_DEFINE_CONSTANT(target, Z_DEFAULT_COMPRESSION);
+  NODE_DEFINE_CONSTANT(target, Z_FILTERED);
+  NODE_DEFINE_CONSTANT(target, Z_HUFFMAN_ONLY);
+  NODE_DEFINE_CONSTANT(target, Z_RLE);
+  NODE_DEFINE_CONSTANT(target, Z_FIXED);
+  NODE_DEFINE_CONSTANT(target, Z_DEFAULT_STRATEGY);
+  NODE_DEFINE_CONSTANT(target, ZLIB_VERNUM);
+
+  target->Set(String::NewSymbol("ZLIB_VERSION"), String::New(ZLIB_VERSION));
+}
+
+}  // namespace node
+
+NODE_MODULE(node_zlib, node::InitZlib);

test/simple/test-zlib.js

@@ -0,0 +1,221 @@
+// Copyright Joyent, Inc. and other Node contributors.
+//
+// Permission is hereby granted, free of charge, to any person obtaining a
+// copy of this software and associated documentation files (the
+// "Software"), to deal in the Software without restriction, including
+// without limitation the rights to use, copy, modify, merge, publish,
+// distribute, sublicense, and/or sell copies of the Software, and to permit
+// persons to whom the Software is furnished to do so, subject to the
+// following conditions:
+//
+// The above copyright notice and this permission notice shall be included
+// in all copies or substantial portions of the Software.
+//
+// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
+// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+// USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+var common = require('../common.js');
+var assert = require('assert');
+var zlib = require('zlib');
+var path = require('path');
+
+var zlibPairs =
+  [ [zlib.Deflate, zlib.Inflate],
+    [zlib.Gzip, zlib.Gunzip],
+    [zlib.Deflate, zlib.Unzip],
+    [zlib.Gzip, zlib.Unzip],
+    [zlib.DeflateRaw, zlib.InflateRaw ] ];
+
+// how fast to trickle through the slowstream
+var trickle = [128, 1024, 1024 * 1024];
+
+// tunable options for zlib classes.
+
+// several different chunk sizes
+var chunkSize = [128, 1024, 1024 * 16, 1024 * 1024];
+
+// this is every possible value.
+var level = [-1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9];
+var windowBits = [8, 9, 10, 11, 12, 13, 14, 15];
+var memLevel = [1, 2, 3, 4, 5, 6, 7, 8, 9];
+var strategy = [0, 1, 2, 3, 4];
+
+// it's nice in theory to test every combination, but it
+// takes WAY too long.  Maybe a pummel test could do this?
+if (!process.env.PUMMEL) {
+  trickle = [1024];
+  chunkSize = [1024 * 16];
+  level = [6];
+  memLevel = [8];
+  windowBits = [15];
+  strategy = [0];
+}
+
+var fs = require('fs');
+
+var testFiles = [ 'person.jpg', 'elipses.txt', 'empty.txt' ];
+var tests = {}
+testFiles.forEach(function(file) {
+  tests[file] = fs.readFileSync(path.resolve(common.fixturesDir, file));
+});
+
+var util = require('util');
+var stream = require('stream');
+
+
+// stream that saves everything
+function BufferStream() {
+  this.chunks = [];
+  this.length = 0;
+  this.writable = true;
+  this.readable = true;
+}
+
+util.inherits(BufferStream, stream.Stream);
+
+BufferStream.prototype.write = function(c) {
+  this.chunks.push(c);
+  this.length += c.length;
+};
+
+BufferStream.prototype.end = function(c) {
+  if (c) this.write(c);
+  // flatten
+  var buf = new Buffer(this.length);
+  var i = 0;
+  this.chunks.forEach(function(c) {
+    c.copy(buf, i);
+    i += c.length;
+  });
+  this.emit('data', buf);
+  this.emit('end');
+};
+
+
+function SlowStream(trickle) {
+  this.trickle = trickle;
+  this.offset = 0;
+  this.readable = this.writable = true;
+}
+
+util.inherits(SlowStream, stream.Stream);
+
+SlowStream.prototype.write = function() {
+  throw new Error('not implemented, just call ss.end(chunk)');
+};
+
+SlowStream.prototype.pause = function() {
+  this.paused = true;
+  this.emit('pause');
+};
+
+SlowStream.prototype.resume = function() {
+  var self = this;
+  if (self.ended) return;
+  self.emit('resume');
+  if (!self.chunk) return;
+  self.paused = false;
+  emit();
+  function emit() {
+    if (self.paused) return;
+    if (self.offset >= self.length) {
+      self.ended = true;
+      return self.emit('end');
+    }
+    var end = Math.min(self.offset + self.trickle, self.length);
+    var c = self.chunk.slice(self.offset, end);
+    self.offset += c.length;
+    self.emit('data', c);
+    process.nextTick(emit);
+  }
+}
+
+SlowStream.prototype.end = function(chunk) {
+  // walk over the chunk in blocks.
+  var self = this;
+  self.chunk = chunk;
+  self.length = chunk.length;
+  self.resume();
+  return self.ended;
+};
+
+
+
+// for each of the files, make sure that compressing and
+// decompressing results in the same data, for every combination
+// of the options set above.
+var failures = 0;
+var total = 0;
+var done = 0;
+
+Object.keys(tests).forEach(function(file) {
+  var test = tests[file];
+  chunkSize.forEach(function(chunkSize) {
+  trickle.forEach(function(trickle) {
+  windowBits.forEach(function(windowBits) {
+  level.forEach(function(level) {
+  memLevel.forEach(function(memLevel) {
+  strategy.forEach(function(strategy) {
+    zlibPairs.forEach(function(pair) {
+      var Def = pair[0];
+      var Inf = pair[1];
+      var opts = { level: level,
+                   windowBits: windowBits,
+                   memLevel: memLevel,
+                   strategy: strategy };
+
+      total ++;
+
+      var def = new Def(opts);
+      var inf = new Inf(opts);
+      var ss = new SlowStream(trickle);
+      var buf = new BufferStream();
+
+      // verify that the same exact buffer comes out the other end.
+      buf.on('data', function(c) {
+        var msg = file + ' ' +
+                  chunkSize + ' ' +
+                  JSON.stringify(opts) + ' ' +
+                  Def.name + ' -> ' + Inf.name;
+        var ok = true;
+        var testNum = ++done;
+        for (var i = 0; i < c.length; i++) {
+          if (c[i] !== test[i]) {
+            ok = false;
+            failures ++;
+            break;
+          }
+        }
+        if (ok) {
+          console.log('ok ' + (testNum) + ' ' + msg);
+        } else {
+          console.log('not ok ' + (testNum) + ' ' + msg);
+          console.log('  ...');
+          console.log('  testfile: ' + file);
+          console.log('  type: ' + Def.name + ' -> ' + Inf.name);
+          console.log('  position: ' + i);
+          console.log('  options: ' + JSON.stringify(opts));
+          console.log('  expect: ' + test[i]);
+          console.log('  actual: ' + c[i]);
+          console.log('  chunkSize: ' + chunkSize);
+          console.log('  ---');
+        }
+      });
+
+      // the magic happens here.
+      ss.pipe(def).pipe(inf).pipe(buf);
+      ss.end(test);
+    });
+  }); }); }); }); }); }); // sad stallman is sad.
+});
+
+process.on('exit', function(code) {
+  console.log('1..' + done);
+  assert.equal(done, total, (total - done) + ' tests left unfinished');
+  assert.ok(!failures, 'some test failures');
+});

wscript

@@ -62,11 +62,11 @@ def set_options(opt):
   opt.tool_options('compiler_cc')
   opt.tool_options('misc')
   opt.add_option( '--libdir'
-		, action='store'
+                , action='store'
-		, type='string'
+                , type='string'
-		, default=False
+                , default=False
-		, help='Install into this libdir [Release: ${PREFIX}/lib]'
+                , help='Install into this libdir [Release: ${PREFIX}/lib]'
-		)
+                )
   opt.add_option( '--debug'
                 , action='store_true'
                 , default=False
@@ -158,7 +158,29 @@ def set_options(opt):
                 )
 
 
-  opt.add_option('--shared-cares'
+  opt.add_option( '--shared-zlib'
+                , action='store_true'
+                , default=False
+                , help='Link to a shared zlib DLL instead of static linking'
+                , dest='shared_zlib'
+                )
+
+  opt.add_option( '--shared-zlib-includes'
+                , action='store'
+                , default=False
+                , help='Directory containing zlib header files'
+                , dest='shared_zlib_includes'
+                )
+
+  opt.add_option( '--shared-zlib-libpath'
+                , action='store'
+                , default=False
+                , help='A directory to search for the shared zlib DLL'
+                , dest='shared_zlib_libpath'
+                )
+
+
+  opt.add_option( '--shared-cares'
                 , action='store_true'
                 , default=False
                 , help='Link to a shared C-Ares DLL instead of static linking'
@@ -246,6 +268,7 @@ def configure(conf):
 
   conf.env["USE_SHARED_V8"] = o.shared_v8 or o.shared_v8_includes or o.shared_v8_libpath or o.shared_v8_libname
   conf.env["USE_SHARED_CARES"] = o.shared_cares or o.shared_cares_includes or o.shared_cares_libpath
+  conf.env["USE_SHARED_ZLIB"] = o.shared_zlib or o.shared_zlib_includes or o.shared_zlib_libpath
 
   conf.env["USE_GDBJIT"] = o.use_gdbjit
 
@@ -838,7 +861,7 @@ def build(bld):
   node = bld.new_task_gen("cxx", product_type)
   node.name         = "node"
   node.target       = "node"
-  node.uselib = 'RT OPENSSL CARES EXECINFO DL KVM SOCKET NSL KSTAT UTIL OPROFILE'
+  node.uselib = 'RT OPENSSL ZLIB CARES EXECINFO DL KVM SOCKET NSL KSTAT UTIL OPROFILE'
   node.add_objects = 'http_parser'
   if product_type_is_lib:
     node.install_path = '${LIBDIR}'
@@ -857,6 +880,7 @@ def build(bld):
     src/node_os.cc
     src/node_dtrace.cc
     src/node_string.cc
+    src/node_zlib.cc
     src/timer_wrap.cc
     src/handle_wrap.cc
     src/stream_wrap.cc